Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.
While at it, also remove surrounding code which is commented out,
or '#if 1' nops.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current code creates directories in procfs named after interfaces,
but doesn't handle renaming. This can result in name collisions and
consequent WARNINGs. It also means that the interface name cannot
reliably be used to remove the directory - in fact the current code
doesn't even try, and always uses "wlan0"!
Since the name of a proc_dir_entry is embedded in it, use that when
removing it.
Add a netdev notifier to catch interface renaming, and remove and
re-add the directory at this point.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently various resources may be leaked in case of an error.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use memdup_user when user data is immediately copied into the
allocated region.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a spin_unlock and mutex_unlock missing on the error path.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression E1;
@@
* spin_lock(E1,...);
<+... when != E1
if (...) {
... when != E1
* return ...;
}
...+>
* spin_unlock(E1,...);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. move adis16400_spi_read_burst() to adis16400_ring.c since it is only
called there
2. add the lost calling to adis16400_self_test()
3. codes cleanup
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. add delay between spi transfers
2. move burst read to ring function
3. clean-up
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The sysfs attribute call backs take a file pointer these days. This was
added in 2c3c8bea60 "sysfs: add struct file* to bin_attr callbacks"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers use kzalloc() but don't include slab.h. They currently
build though because the spi.h header will pull in slab.h for us. But
rather than rely on that behavior forever, include slab.h explicitly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A bunch of IIO files contain spurious semicolons after function
definitions and case statements and if statements. Guess people
really like this thing, but kill them anyways so they'll stop
spreading via copy & paste with new drivers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Standardize the spacing/style across the IIO build files:
- comment block in Kconfigs
- newlines at ends of files
- trailing lines at ends of files
- indent with one tab, not spaces or mixed
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Related changes:
- Included example to show usage as generic
(non-swap) disk with ext4 filesystem.
- Renamed rzscontrol to zramconfig to match
with new device naming.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Related changes:
- Modify revelant Kconfig and Makefile accordingly.
- Change include filenames in code.
- Remove dependency on CONFIG_SWAP in Kconfig as zram usage
is no longer limited to swap disks.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, ramzwap devices (/dev/ramzswapX) can only
be used as swap disks since it was hard-coded to consider
only the first request in bio vector.
Now, we iterate over all the segments in an incoming
bio which allows us to handle all kinds of I/O requests.
ramzswap devices can still handle PAGE_SIZE aligned and
multiple of PAGE_SIZE sized I/O requests only. To ensure
that we get always get such requests only, we set following
request_queue attributes to PAGE_SIZE:
- physical_block_size
- logical_block_size
- io_min
- io_opt
Note: physical and logical block sizes were already set
equal to PAGE_SIZE and that seems to be sufficient to get
PAGE_SIZE aligned I/O.
Since we are no longer limited to handling swap requests
only, the next few patches rename ramzswap to zram. So,
the devices will then be called /dev/zram{0, 1, 2, ...}
Usage/Examples:
1) Use as /tmp storage
- mkfs.ext4 /dev/zram0
- mount /dev/zram0 /tmp
2) Use as swap:
- mkswap /dev/zram0
- swapon /dev/zram0 -p 10 # give highest priority to zram0
Performance:
- I/O benchamark done with 'dd' command. Details can be
found here:
http://code.google.com/p/compcache/wiki/zramperf
Summary:
- Maximum read speed (approx):
- ram disk: 1200 MB/sec
- zram disk: 600 MB/sec
- Maximum write speed (approx):
- ram disk: 500 MB/sec
- zram disk: 160 MB/sec
Issues:
- Double caching: We can potentially waste memory by having
two copies of a page -- one in page cache (uncompress) and
second in the device memory (compressed). However, during
reclaim, clean page cache pages are quickly freed, so this
does not seem to be a big problem.
- Stale data: Not all filesystems support issuing 'discard'
requests to underlying block devices. So, if such filesystems
are used over zram devices, we can accumulate lot of stale
data in memory. Even for filesystems to do support discard
(example, ext4), we need to see how effective it is.
- Scalability: There is only one (per-device) de/compression
buffer stats. This can lead to significant contention, especially
when used for generic (non-swap) purposes.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Older mechanism of counting the number of protocols
registered with ST was slow, in-efficient.
It used to check the protocol data for NULL for each
registration/unregistration.
With this change, counting protocols in maintained by
a single counter protos_registered.
Counting protocols is not just for debug purposes
Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add version information to be available under the sysfs group
for kim.
Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the older way of communicating with user-space
daemon UIM.
The older way involved creating of a new kobj and pid
sysfs file under it, and sending signal using that pid.
Now we communicate via rfkill to user-space UIM.
Background: UIM is the user-space daemon which upon
notification from ldisc driver, opens the tty, sets
default baud and then installs (tiocsetd) the ldisc.
Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update the TODO of TI-ST to make sure it reflects current list
of activities that need to be done.
Also point it out to the user-space app code relevant to it.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename driver struct and callbacks to vt6655_* instead of device_* and add
__devinit/__devexit directives.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the 80211mgr.c file that fixes up warnings
found by the checkpatch.pl tool
Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build error:
drivers/staging/vt6656/built-in.o: In function `rotr1':
(.text+0x1a878): multiple definition of `rotr1'
drivers/staging/rt2870/built-in.o:(.text+0x106c2): first defined here
drivers/staging/vt6656/built-in.o: In function `tkip_sbox':
(.text+0x1a848): multiple definition of `tkip_sbox'
drivers/staging/rt2870/built-in.o:(.text+0x10697): first defined here
drivers/staging/vt6656/built-in.o: In function `xor_32':
(.text+0x1ec24): multiple definition of `xor_32'
drivers/staging/rt2870/built-in.o:(.text+0x111c4): first defined here
drivers/staging/vt6656/built-in.o: In function `xor_128':
(.text+0x1ec00): multiple definition of `xor_128'
drivers/staging/rt2870/built-in.o:(.text+0x111dd): first defined here
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resolved whitespace-related checkpatch findings in .h files
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resolved checkpatch findings, but some long lines warnings.
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 902d241129 converted U32 to u32
which you would think would be just fine. Unfortunatly, it seems that
VIA only builds their code on a 32bit processor (which makes sense if
you think about it), but this doesn't work on x86-64. So fix up the few
places where this really wanted to be an unsigned long width.
Cc: Charles Clément <caratorn@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>,
Cc: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>