The iommu_domain_identity_map() helper takes start/end PFN as arguments.
Fix a misuse case where the start and end addresses are passed.
Fixes: e70b081c6f ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.
Fixes: 765b6a98c1 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PCI ACS is disabled if Intel IOMMU is off by default or intel_iommu=off
is used in command line. Unfortunately, Intel IOMMU will be forced on if
there're devices sitting on an external facing PCI port that is marked
as untrusted (for example, thunderbolt peripherals). That means, PCI ACS
is disabled while Intel IOMMU is forced on to isolate those devices. As
the result, the devices of an MFD will be grouped by a single group even
the ACS is supported on device.
[ 0.691263] pci 0000:00:07.1: Adding to iommu group 3
[ 0.691277] pci 0000:00:07.2: Adding to iommu group 3
[ 0.691292] pci 0000:00:07.3: Adding to iommu group 3
Fix it by requesting PCI ACS when Intel IOMMU is detected with platform
opt in hint.
Fixes: 89a6079df7 ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Co-developed-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, an external malicious PCI device can masquerade the VID:PID
of faulty gfx devices, and thus apply iommu quirks to effectively
disable the IOMMU restrictions for itself.
Thus we need to ensure that the device we are applying quirks to, is
indeed an internal trusted device.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current Intel SVM is designed by setting the pgd_t of the processor page
table to FLPTR field of the PASID entry. The first level translation only
supports 4 and 5 level paging structures, hence it's infeasible for the
IOMMU to share a processor's page table when it's running in 32-bit mode.
Let's disable 32bit support for now and claim support only when all the
missing pieces are ready in the future.
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Move the Intel and AMD IOMMU drivers into their own
subdirectory. Both drivers consist of several files by now and
giving them their own directory unclutters the IOMMU top-level
directory a bit.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl7jme4ACgkQK/BELZcB
GuNNMw//U7AL3Qq6J8DqU+Ay+gIblxKUhWtYLVHad1+agSWmcbfy4E6iV8FqXLbP
HnCSmA7ScgEMN+3GAve/WpWccMI3aeAgp4xI4MElz/6p4QeJXfNu9COrllif+OX7
4fDpxXyd0fhKev4lPGZFRY8yGgvgP5ZHvDG0juoxi3bKCqiC2bkAga3itC9RPCQb
8kBefKIb7/q+UUGGVppTvVIW0mrqWLQ1TcnfKf0hovU7yZs4i4RO+8br6Q5eNUcB
Vb64vCV3qkQ/zPdr4vK6rvuZTPRMKkCgY4+MJr/g2/JQWuZxF1O+q+TsTYI1ISAS
qNPRdxgNrZbSBDowg2QfQtPBHPpq3m4eNDeD+ewyQkrVt0/Eneg6Np0FG9j3tGAG
+IS64r2E25O0tGtBIQ9Mi2TC68S0C7VtMbzx55zVcTGF0JH9T2YW4sSdRcTjVdW6
WBFqu5fXEKk63ln3h/8JEP7zPWGp+Q3cuOChDvcmIMjCxQ84k5jOB5AIZppGIgJ9
0nGf45t8YCvIXMbNKufYqjesJZOC2bd+Swi1MZXVlO/gSVv19O40UW+F1X0e7YOp
MHOzsV44rE2posS/huHOLR4q0AQTdc9O1mywCCGDxNW8tlwIBHsLLJ8b9C9raIRn
mZkq94QZQXta+WYtoGvbk6nHQ89FtBOOdEH2TSlEbvvYowpjZZE=
=gX8z
-----END PGP SIGNATURE-----
Merge tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu driver directory structure cleanup from Joerg Roedel:
"Move the Intel and AMD IOMMU drivers into their own subdirectory.
Both drivers consist of several files by now and giving them their own
directory unclutters the IOMMU top-level directory a bit"
* tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Move Intel IOMMU driver into subdirectory
iommu/amd: Move AMD IOMMU driver into subdirectory
Move all files related to the Intel IOMMU driver into its own
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200609130303.26974-3-joro@8bytes.org
Move all files related to the AMD IOMMU driver into its own
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200609130303.26974-2-joro@8bytes.org
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the
pdev->no_vf_scan flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio
and qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
=VhXR
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the pdev->no_vf_scan
flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio and
qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
vfio-ccw: make vfio_ccw_regops variables declarations static
vfio-ccw: Add trace for CRW event
vfio-ccw: Wire up the CRW irq and CRW region
vfio-ccw: Introduce a new CRW region
vfio-ccw: Refactor IRQ handlers
vfio-ccw: Introduce a new schib region
vfio-ccw: Refactor the unregister of the async regions
vfio-ccw: Register a chp_event callback for vfio-ccw
vfio-ccw: Introduce new helper functions to free/destroy regions
vfio-ccw: document possible errors
vfio-ccw: Enable transparent CCW IPL from DASD
s390/pci: Log new handle in clp_disable_fh()
s390/cio, s390/qeth: cleanup PNSO CHSC
s390/qdio: remove q->first_to_kick
s390/qdio: fix up qdio_start_irq() kerneldoc
s390: remove critical section cleanup from entry.S
s390: add machine check SIGP
s390/pci: ioremap() align with generic code
s390/ap: introduce new ap function ap_get_qdev()
Documentation/s390: Update / remove developerWorks web links
...
Including:
- A big part of this is a change in how devices get connected to
IOMMUs in the core code. It contains the change from the old
add_device()/remove_device() to the new
probe_device()/release_device() call-backs. As a result
functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group
allocation for each device.
The reason for this change was to get more robust allocation
of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into
the IOMMU tree, but there are no known bugs left. The last fix
is applied on-top of the merge commit for the topic branches.
- Removal of the driver private domain handling in the Intel
VT-d driver. This was fragile code and I am glad it is gone
now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the
Intel VT-d driver
- Replacement of the Intel SVM interfaces to the common
IOMMU SVA API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that
it can be claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain
type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by
Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of
IOMMU core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl7eX5gACgkQK/BELZcB
GuOMMQ//Si8h3uC4QhTmeNM6OwYpTcImMuCtqOebVDOJYWfbjGb4U2ZvDSUu4r7u
KGj66pWBq9kciKaM5HcLnWNg4iNNG+iZHwYSOy2DAOdPorWh40aM/Obozdd4D4eK
sXt4uy1JEQem/Bm4eTwmvaJV5/riyK6xn1HVocPejstGSJCh4kal/bYuhj415qEa
LLrN0AcitoPaSRl4Pl7/wEtesk+Az0g94jY9qDhtxIQJXWlAwO25s+rIPy4S7QuW
WAFGU+Xp+J7WC3hQm6nHKQtURIqPHtqozT9Flws9YETuyeKwn47GRitMiAXZsy7R
t+kj1cHyglEhe2hdPnJBSFIjyrO3cCrV7CUVryJHigPCQOaQLjoEegThQCYU3VQu
FPRBX+bp4haHeo3BCBy2jQv4JZrPFkTVXeVEtpMRDOoJLb2OKaI34xbOvGy6dMM0
dFtpbAW2IjHuneJaQCbJIC+jaEYii8mr3Zwok4LS8u8Sy+7PPSKmt6Tti3enD8+C
pBB/0CxNJvQFhl13s6oI8NHTT9D6cPTbjxc2Gfc3UuKyyWsz+eR54gRhaBi0FypA
p6syMosNVjjOaHFd5K5gsbpUFCC3X/drIhqeXRLgQ51mqfkNZMuBBtiyLWTk7iJd
CK+1f2aqtBrpUdSNjTzE/XmR+AhjIn2oIcG/7jPCgYXQoSGM2Sg=
=a4z4
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
-----BEGIN PGP SIGNATURE-----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=GT3J
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
The iommu_group_do_dma_attach() must not attach devices which have
deferred_attach set. Otherwise devices could cause IOMMU faults when
re-initialized in a kdump kernel.
Fixes: deac0b3bed ("iommu: Split off default domain allocation from group assignment")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200604091944.26402-1-joro@8bytes.org
Checking the return value of get_device_id() in a code-path which has
already done check_device() is not needed, as check_device() does the
same check and bails out if it fails.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-11-joro@8bytes.org
Do not use dev->archdata.iommu anymore and switch to using the private
per-device pointer provided by the IOMMU core code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-10-joro@8bytes.org
This is covered by IOMMU_DOMAIN_DMA from the IOMMU core code already,
so remove it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-8-joro@8bytes.org
Align release of the page-table with the place where it is allocated.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-6-joro@8bytes.org
Use 'struct domain_pgtable' instead to free_pagetable(). This solves
the problem that amd_iommu_domain_direct_map() needs to restore
domain->pt_root after the device table has been updated just to make
free_pagetable release the domain page-table.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-4-joro@8bytes.org
This function is internal to the AMD IOMMU driver and only exported
because the amd_iommu_v2 modules calls it. But the reason it is called
from there could better be handled by amd_iommu_is_attach_deferred().
So unexport get_dev_data() and use amd_iommu_is_attach_deferred()
instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-3-joro@8bytes.org
kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.
Fixes: d72e31c937 ("iommu: IOMMU Groups")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make intel_svm_unbind_mm() a static function.
Fixes: 064a57d7dd ("iommu/vt-d: Replace intel SVM APIs with generic SVA APIs")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1590689031-79318-1-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By removing the real DMA indirection in find_domain(), we can allow
sub-devices of a real DMA device to have their own valid
device_domain_info. The dmar lookup and context entry removal paths have
been fixed to account for sub-devices.
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200527165617.297470-4-jonathan.derrick@intel.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207575
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sub-devices of a real DMA device might exist on a separate segment than
the real DMA device and its IOMMU. These devices should still have a
valid device_domain_info, but the current dma alias model won't
allocate info for the subdevice.
This patch adds a segment member to struct device_domain_info and uses
the sub-device's BDF so that these sub-devices won't alias to other
devices.
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200527165617.297470-3-jonathan.derrick@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Domain context mapping can encounter issues with sub-devices of a real
DMA device. A sub-device cannot have a valid context entry due to it
potentially aliasing another device's 16-bit ID. It's expected that
sub-devices of the real DMA device uses the real DMA device's requester
when context mapping.
This is an issue when a sub-device is removed where the context entry is
cleared for all aliases. Other sub-devices are still valid, resulting in
those sub-devices being stranded without valid context entries.
The correct approach is to use the real DMA device when programming the
context entries. The insertion path is correct because device_to_iommu()
will return the bus and devfn of the real DMA device. The removal path
needs to only operate on the real DMA device, otherwise the entire
context entry would be cleared for all sub-devices of the real DMA
device.
This patch also adds a helper to determine if a struct device is a
sub-device of a real DMA device.
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200527165617.297470-2-jonathan.derrick@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After binding a device to an mm, device drivers currently need to
register a mm_exit handler. This function is called when the mm exits,
to gracefully stop DMA targeting the address space and flush page faults
to the IOMMU.
This is deemed too complex for the MMU release() notifier, which may be
triggered by any mmput() invocation, from about 120 callsites [1]. The
upcoming SVA module has an example of such complexity: the I/O Page
Fault handler would need to call mmput_async() instead of mmput() after
handling an IOPF, to avoid triggering the release() notifier which would
in turn drain the IOPF queue and lock up.
Another concern is the DMA stop function taking too long, up to several
minutes [2]. For some mmput() callers this may disturb other users. For
example, if the OOM killer picks the mm bound to a device as the victim
and that mm's memory is locked, if the release() takes too long, it
might choose additional innocent victims to kill.
To simplify the MMU release notifier, don't forward the notification to
device drivers. Since they don't stop DMA on mm exit anymore, the PASID
lifetime is extended:
(1) The device driver calls bind(). A PASID is allocated.
Here any DMA fault is handled by mm, and on error we don't print
anything to dmesg. Userspace can easily trigger errors by issuing DMA
on unmapped buffers.
(2) exit_mmap(), for example the process took a SIGKILL. This step
doesn't happen during normal operations. Remove the pgd from the
PASID table, since the page tables are about to be freed. Invalidate
the IOTLBs.
Here the device may still perform DMA on the address space. Incoming
transactions are aborted but faults aren't printed out. ATS
Translation Requests return Successful Translation Completions with
R=W=0. PRI Page Requests return with Invalid Request.
(3) The device driver stops DMA, possibly following release of a fd, and
calls unbind(). PASID table is cleared, IOTLB invalidated if
necessary. The page fault queues are drained, and the PASID is
freed.
If DMA for that PASID is still running here, something went seriously
wrong and errors should be reported.
For now remove iommu_sva_ops entirely. We might need to re-introduce
them at some point, for example to notify device drivers of unhandled
IOPF.
[1] https://lore.kernel.org/linux-iommu/20200306174239.GM31668@ziepe.ca/
[2] https://lore.kernel.org/linux-iommu/4d68da96-0ad5-b412-5987-2f7a6aa796c3@amd.com/
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200423125329.782066-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct sun50i_iommu_ops is not modified and can be made const to
allow the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
14358 2501 64 16923 421b drivers/iommu/sun50i-iommu.o
After:
text data bss dec hex filename
14726 2117 64 16907 420b drivers/iommu/sun50i-iommu.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200525214958.30015-3-rikard.falkeborn@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct hyperv_ir_domain_ops is not modified and can be made const to
allow the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
2916 1180 1120 5216 1460 drivers/iommu/hyperv-iommu.o
After:
text data bss dec hex filename
3044 1052 1120 5216 1460 drivers/iommu/hyperv-iommu.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200525214958.30015-2-rikard.falkeborn@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pci_ats_supported() helper checks if a device supports ATS and is
allowed to use it. By checking the ATS capability it also integrates the
pci_ats_disabled() check from pci_ats_init(). Simplify the vt-d checks.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200520152201.3309416-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The new pci_ats_supported() function checks if a device supports ATS and
is allowed to use it.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200520152201.3309416-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pci_ats_supported() function checks if a device supports ATS and is
allowed to use it. In addition to checking that the device has an ATS
capability and that the global pci=noats is not set
(pci_ats_disabled()), it also checks if a device is untrusted.
A device is untrusted if it is plugged into an external-facing port such
as Thunderbolt and could be spoofing an existing device to exploit
weaknesses in the IOMMU configuration. By calling pci_ats_supported() we
keep DTE[I]=0 for untrusted devices and abort transactions with
Pretranslated Addresses.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200520152201.3309416-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_alloc_default_domain() function takes a reference to an IOMMU
group without releasing it. This causes the group to never be released,
with undefined side effects.
The function has only one call-site, which takes a group reference on
its own, so to fix this leak, do not take another reference in
iommu_alloc_default_domain() and pass the group as a function parameter
instead.
Fixes: 6e1aa20491 ("iommu: Move default domain allocation to iommu_probe_device()")
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200525130122.380-1-joro@8bytes.org
Reference: https://lore.kernel.org/lkml/20200522130145.30067-1-saiprakash.ranjan@codeaurora.org/
Pointers should be casted to unsigned long to avoid "cast from pointer
to integer of different size" warnings.
drivers/iommu/intel-pasid.c:818:6: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iommu/intel-pasid.c:821:9: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iommu/intel-pasid.c:824:23: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iommu/intel-svm.c:343:45: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fixes: b0d1f8741b ("iommu/vt-d: Add nested translation helper function")
Fixes: 56722a4398 ("iommu/vt-d: Add bind guest PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200519013423.11971-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The .probe_finalize() call-back of some IOMMU drivers calls into
arm_iommu_attach_device(). This function will call back into the
IOMMU core code, where it tries to take group->mutex again, resulting
in a deadlock.
As there is no reason why .probe_finalize() needs to be called under
that mutex, move it after the lock has been released to fix the
deadlock.
Fixes: deac0b3bed ("iommu: Split off default domain allocation from group assignment")
Reported-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200519132824.15163-1-joro@8bytes.org
In preparation for sharing some ASIDs with the CPU, use a global xarray to
store ASIDs and their context. ASID#0 is now reserved, and the ASID
space is global.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200519175502.2504091-9-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The IOMMU core code has support for deferring the attachment of a domain
to a device. This is needed in kdump kernels where the new domain must
not be attached to a device before the device driver takes it over.
When the AMD IOMMU driver got converted to use the dma-iommu
implementation, the deferred attaching got lost. The code in
dma-iommu.c has support for deferred attaching, but it calls into
iommu_attach_device() to actually do it. But iommu_attach_device()
will check if the device should be deferred in it code-path and do
nothing, breaking deferred attachment.
Move the is_deferred_attach() check out of the attach_device path and
into iommu_group_add_device() to make deferred attaching work from the
dma-iommu code.
Fixes: 795bbbb9b6 ("iommu/dma-iommu: Handle deferred devices")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200519130340.14564-1-joro@8bytes.org
In case of error, the function devm_platform_ioremap_resource() returns
ERR_PTR() not NULL. The NULL test in the return value check must be
replaced with IS_ERR().
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200519091857.134170-1-weiyongjun1@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some SMMUv3 implementation embed the Perf Monitor Group Registers (PMCG)
inside the first 64kB region of the SMMU. Since PMCG are managed by a
separate driver, this layout causes resource reservation conflicts
during boot.
To avoid this conflict, don't reserve the MMIO regions that are
implementation defined. Although devm_ioremap_resource() still works on
full pages under the hood, this way we benefit from resource conflict
checks.
Fixes: 7d839b4b9e ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200513110255.597203-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The modem remote processor has two access paths to DDR. One path is
directly connected to DDR and another path goes through an SMMU. The
SMMU path is configured to be a direct mapping because it's used by
various peripherals in the modem subsystem. Typically this direct
mapping is configured statically at EL2 by QHEE (Qualcomm's Hypervisor
Execution Environment) before the kernel is entered.
In certain firmware configuration, especially when the kernel is already
in full control of the SMMU, defer programming the modem SIDs to the
kernel. Let's add compatibles here so that we can have the kernel
program the SIDs for the modem in these cases.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200511175532.25874-1-sibis@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/iommu/arm-smmu-v3.c:2989:26:
warning: variable ‘smmu’ set but not used [-Wunused-but-set-variable]
struct arm_smmu_device *smmu;
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Link: https://lore.kernel.org/r/20200508014955.87630-1-chenzhou10@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The MediaTek V1 IOMMU is arm32 whose default domain type is
IOMMU_DOMAIN_UNMANAGED. Add this to satisfy the bus_iommu_probe to
enter "probe_finalize".
The iommu framework will create a iommu domain for each a device.
But all the devices share a iommu domain here, thus we skip all the
other domains in the "attach_device" except the domain we create
internally with arm_iommu_create_mapping.
Also a minor change: in the attach_device, "data" always is not null.
Remove "if (!data) return".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/1589530123-30240-1-git-send-email-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
