There is no need to only iterate in chunks of PAGE_SIZE or less in
bvec_iter_advance, given that the callers pass in the chunk length that
they are operating on - either that already is less than PAGE_SIZE
because they do classic page-based iteration, or it is larger because
the caller operates on multi-page bvecs.
This should help shaving off a few cycles of the I/O hot path.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mp_bvec_for_each_segment() is a bit big for the iteration, so introduce
a light-weight helper for iterating over pages, then 32bytes stack
space can be saved.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a fast path for single-page bvec IO, then we can avoid
to call bvec_split_segs() unnecessarily.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a fast path for single-page bvec IO, then blk_bvec_map_sg()
can be avoided.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Single-page bvec can often be seen in small BS workloads, so
introduce bvec_nth_page() for avoiding to call nth_page() unnecessarily,
which looks not cheap.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store the request queue the last bio was submitted to in the iocb
private data in addition to the cookie so that we find the right block
device. Also refactor the common direct I/O bio submission code into a
nice little helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modified to use bio_set_polled().
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the upcoming async polled IO, we can't sleep allocating requests.
If we do, then we introduce a deadlock where the submitter already
has async polled IO in-flight, but can't wait for them to complete
since polled requests must be active found and reaped.
Utilize the helper in the blockdev DIRECT_IO code.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just call blk_poll on the iocb cookie, we can derive the block device
from the inode trivially.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This new methods is used to explicitly poll for I/O completion for an
iocb. It must be called for any iocb submitted asynchronously (that
is with a non-null ki_complete) which has the IOCB_HIPRI flag set.
The method is assisted by a new ki_cookie field in struct iocb to store
the polling cookie.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 0da03cab87
("loop: Fix deadlock when calling blkdev_reread_part()") moves
blkdev_reread_part() out of the loop_ctl_mutex. However,
GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result,
__blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and
will not rescan the loop device to delete all partitions.
Below are steps to reproduce the issue:
step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100
step2 # losetup -P /dev/loop0 tmp.raw
step3 # parted /dev/loop0 mklabel gpt
step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1
step5 # losetup -d /dev/loop0
Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and
there is below kernel warning message:
[ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22)
This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part().
Fixes: 0da03cab87 ("loop: Fix deadlock when calling blkdev_reread_part()")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do not print warn message when the partition scan returns 0.
Fixes: d57f3374ba ("loop: Move special partition reread handling in loop_clr_fd()")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block bounce needs to allocate new page for doing IO, and the
new page has to be updated to bvec table.
Commit 6dc4f100c switches __blk_queue_bounce() to use the new
bio_for_each_segment_all() interface. Unfortunately the new
bio_for_each_segment_all() can't be used to update bvec table.
This patch fixes this issue by retrieving bvec from the table
directly, then the new allocated page can be updated to the bio.
This way is safe because the cloned bio is single page bvec.
Fixes: 6dc4f100c ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe changes for 5.1 from Christoph
* 'nvme-5.1' of git://git.infradead.org/nvme: (22 commits)
nvme-rdma: use nr_phys_segments when map rq to sgl
nvmet: convert to SPDX identifiers
nvmet-rdma: convert to SPDX identifiers
nvme-loop: convert to SPDX identifiers
nvmet-fcloop: convert to SPDX identifiers
nvmet-fc: convert to SPDX identifiers
nvme: convert to SPDX identifiers
nvme-pci: convert to SPDX identifiers
nvme-lightnvm: convert to SPDX identifiers
nvme-rdma: convert to SPDX identifiers
nvme-fc: convert to SPDX identifiers
nvme-fabrics: convert to SPDX identifiers
nvme-tcp.h: fix SPDX header
nvme_ioctl.h: remove duplicate GPL boilerplate
nvme: return error from nvme_alloc_ns()
nvme: avoid that deleting a controller triggers a circular locking complaint
nvme: introduce a helper function for controller deletion
nvme: unexport nvme_delete_ctrl_sync()
nvme-pci: check kstrtoint() return value in queue_count_set()
nvme-fabrics: document the poll function argument
...
Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check
if a command contains data to be mapped. This fixes the case where
a struct request contains LBAs, but it has no payload, such as
Write Zeroes support.
Fixes: 6e02318eae ("nvme: add support for the Write Zeroes command")
Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
We already have a Đ…PDX header, so no need to duplicate the information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
nvme_alloc_ns() might fail, so we should be returning an error code.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch does not change any functionality but makes the next patch
in this series easier to read.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since nvme_delete_ctrl_sync() is not called from any other kernel module,
unexport it.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the compiler complains about 'ret' being set
but not being used when building with W=1.
Fixes: 3b6592f70a ("nvme: utilize two queue maps, one for reads and one for writes") # v5.0-rc1
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the kernel-doc tool reports a warning when
building with W=1.
Fixes: 26c682274e ("nvme-fabrics: allow nvmf_connect_io_queue to poll") # v5.0-rc1
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Implement a simple round-robin I/O policy for multipathing. Path
selection is done in two rounds, first iterating across all optimized
paths, and if that doesn't return any valid paths, iterate over all
optimized and non-optimized paths. If no paths are found, use the
existing algorithm. Also add a sysfs attribute 'iopolicy' to switch
between the current NUMA-aware I/O policy and the 'round-robin' I/O
policy.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
rq->bio can be NULL sometimes, such as flush request, so don't
read bio->bi_seg_front_size until this 'bio' is checked as valid.
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: dcebd75592 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxgqNUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwsoH+OVXu0NQofwTvVru
8lgF3BSDG2mhf7mxbBBlBizGVy9jnjRNGCFMC+Jq8IwiFLwprja/G27kaDTkpuF1
PHC3yfjKvjTeUP5aNdHlmxv6j1sSJfZl0y46DQal4UeTG/Giq8TFTi+Tbz7Wb/WV
yCx4Lr8okAwTuNhnL8ojUCVIpd3c8QsyR9v6nEQ14Mj+MvEbokyTkMJV0bzOrM38
JOB+/X1XY4JPZ6o3MoXrBca3bxbAJzMneq+9CWw1U5eiIG3msg4a+Ua3++RQMDNr
8BP0yCZ6wo32S8uu0PI6HrZaBnLYi5g9Wh7Q7yc0mn1Uh1zWFykA6TtqK90agJeR
A6Ktjw==
=scY4
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc6' into for-5.1/block
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.
* tag 'v5.0-rc6': (525 commits)
Linux 5.0-rc6
x86/mm: Make set_pmd_at() paravirt aware
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
MAINTAINERS: unify reference to xen-devel list
x86/mm/cpa: Fix set_mce_nospec()
futex: Handle early deadlock return correctly
futex: Fix barrier comment
net: dsa: b53: Fix for failure when irq is not defined in dt
blktrace: Show requests without sector
mips: cm: reprime error cause
mips: loongson64: remove unreachable(), fix loongson_poweroff().
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
signal: Better detection of synchronous signals
...
QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since bdced438ac ("block: setup bi_phys_segments after splitting"),
physical segment number is mainly figured out in blk_queue_split() for
fast path, and the flag of BIO_SEG_VALID is set there too.
Now only blk_recount_segments() and blk_recalc_rq_segments() use this
flag.
Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID
is set in blk_queue_split().
For another user of blk_recalc_rq_segments():
- run in partial completion branch of blk_update_request, which is an unusual case
- run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed
since dm-rq is the only user.
Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the
current setup of the I/O path, as it isn't going to save you a significant amount
of cycles.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now multi-page bvec is supported, some helpers may return page by
page, meantime some may return segment by segment, this patch
documents the usage.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now multi-page bvec can cover CONFIG_THP_SWAP, so we don't need to
increase BIO_MAX_PAGES for it.
CONFIG_THP_SWAP needs to split one THP into normal pages and adds
them all to one bio. With multipage-bvec, it just takes one bvec to
hold them all.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch pulls the trigger for multi-page bvecs.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.
Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bch_bio_alloc_pages() is always called on one new bio, so it is safe
to access the bvec table directly. Given it is the only kind of this
case, open code the bvec table access since bio_for_each_segment_all()
will be changed to support for iterating over multipage bvec.
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iov_iter is implemented on bvec itererator helpers, so it is safe to pass
multi-page bvec to it, and this way is much more efficient than passing one
page in each bvec.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once multi-page bvec is enabled, the last bvec may include more than one
page, this patch use mp_bvec_last_segment() to truncate the bio.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BTRFS and guard_bio_eod() need to get the last singlepage segment
from one multipage bvec, so introduce this helper to make them happy.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is more efficient to use bio_for_each_bvec() to map sg, meantime
we have to consider splitting multipage bvec as done in blk_bio_segment_split().
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First it is more efficient to use bio_for_each_bvec() in both
blk_bio_segment_split() and __blk_recalc_rq_segments() to compute how
many multi-page bvecs there are in the bio.
Secondly once bio_for_each_bvec() is used, the bvec may need to be
splitted because its length can be very longer than max segment size,
so we have to split the big bvec into several segments.
Thirdly when splitting multi-page bvec into segments, the max segment
limit may be reached, so the bio split need to be considered under
this situation too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig