The only usage of s900_padinfo[] is to assign it to the padinfo field in
the owl_pinctrl_soc_data struct, which is a const pointer. Make it const
to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200830224311.36994-4-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The only usage of s700_padinfo[] is to assign it to the padinfo field in
the owl_pinctrl_soc_data struct, which is a const pointer. Make it const
to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200830224311.36994-3-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The only usage of owl_pinctrl_ops and owl_pinmux_ops is to assign their
addresses to the pctlops and the pmxops fields in the pinctrl_desc struct,
which are const pointers. Make them const to allow the compiler to put them
in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200830224311.36994-2-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On page 23 of the datasheet [0] it says "The register remains unchanged
until the interrupt is cleared via a read of INTCAP or GPIO." Include
INTCAPA and INTCAPB registers in precious range, so that they aren't
accidentally cleared when we read via debugfs.
[0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf
Fixes: 8f38910ba4 ("pinctrl: mcp23s08: switch to regmap caching")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200828213226.1734264-3-thomas.preston@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The mcp23x17_regmap is initialised with structs named "mcp23x16".
However, the mcp23s08 driver doesn't support the MCP23016 device yet, so
this appears to be a typo.
Fixes: 8f38910ba4 ("pinctrl: mcp23s08: switch to regmap caching")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200828213226.1734264-2-thomas.preston@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One some devices the GPIO should output the inverted value from what
device-drivers / ACPI code expects. The reason for this is unknown,
perhaps these systems use an external buffer chip on the GPIO which
inverts the signal. The BIOS makes this work by setting the
CHV_PADCTRL1_INVRXTX_TXDATA flag.
Before this commit we would unconditionally clear all INVRXTX flags,
including the CHV_PADCTRL1_INVRXTX_TXDATA flag when a GPIO is requested
by a driver (from chv_gpio_request_enable()).
This breaks systems using this setup. Specifically it is causing
problems for systems with a goodix touchscreen, where the BIOS sets the
INVRXTX_TXDATA flag on the GPIO used for the touchscreen's reset pin.
The goodix touchscreen driver by defaults configures this pin as input
(relying on the pull-up to keep it high), but the clearing of the
INVRXTX_TXDATA flag done by chv_gpio_request_enable() causes it to be
driven low for a brief time before the GPIO gets set to input mode.
This causes the touchscreen controller to get reset. On most CHT devs
with this touchscreen this leads to:
[ 31.596534] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 1: -121
The driver retries this though and then everything is fine. But during
reset the touchscreen uses its interrupt pin as bootstrap to determine
which i2c address to use and on the Acer One S1003 the spurious reset
caused by the clearing of the INVRXTX_TXDATA flag causes the controller
to come back up again on the wrong i2c address, breaking things.
This commit fixes both the -121 errors, as well as the total breakage
on the Acer One S1003, by making chv_gpio_clear_triggering() not clear
the INVRXTX_TXDATA flag if the pin is already configured as a GPIO.
Note that chv_pinmux_set_mux() does still unconditionally clear the
flag, so this only affects GPIO usage.
Fixes: a7d4b17166 ("Input: goodix - add support for getting IRQ + reset GPIOs on Cherry Trail devices")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Print particular message in each of error case in the ->probe().
While here, use dev_err_probe() for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828103235.78380-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add initial Qualcomm msm8226 pinctrl driver to support pin configuration
with pinctrl framework for msm8226 SoC.
- Initial formatting and style was taken from the msm8x74 pinctrl driver
added by Björn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20200716205530.22910-3-bartosz.dudziak@snejp.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Group name 'pcie1' is misleading as it controls only PCIe reset pin. Like
other PCIe groups it should have been called 'pcie1_reset'. But due to
backward compatibility it is not possible to change existing group name.
So just add comment describing this PCIe reset functionality.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200724132457.7094-1-pali@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The nomadik pinctrl hardware doesn't have any way to
determine if the active pull is up or down. Reading
the bit currently used to report if the pull is up/down
indicates if the gpio input is reading high or low, it
doesn't reflect the pull state.
For this reason change the output from "pull up"/"pull down" to
"pull enabled". This avoids confusing developers who were using
the output to determine what the pull state is.
Signed-off-by: Andrew Halaney <ajhalaney@gmail.com>
Link: https://lore.kernel.org/r/20200806155322.GA25523@ola-jn9phv2.ad.garmin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update header inclusion block to reflect all direct dependencies
that are being involved in pinctrl-intel.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since we have common helper to retrieve SoC data from driver data
we may switch to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since we have common helper to retrieve SoC data from driver data
we may switch to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
intel_pinctrl_get_soc_data() helper can be used in few driver instead of
open-coded variants. Thus, extract it as a standalone API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
By one of the previous clean up change we got a temporary variable to hold
a device pointer. It can be utilized in other calls in the ->probe() and
save a bit of LOCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Now when all preparations are done we may easily switch to use
struct intel_pinctrl instead of custom one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This is a preparatory patch for bigger clean up pending for Cherryview driver.
There is no functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is no more .groups member in struct chv_pinctrl,
drop associated comment because it's not applicable anymore.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
kernel series:
Core changes:
- The GPIO patch "gpiolib: Introduce
for_each_requested_gpio_in_range() macro" was put in an
immutable branch and merged into the pinctrl tree as well.
We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among
other things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have
been modularized. This is driven by the Google Android
GKI initiative I think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
-----BEGIN PGP SIGNATURE-----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=mJgb
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of the pin control changes for the v5.9 kernel
series:
Core changes:
- The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
macro" was put in an immutable branch and merged into the pinctrl
tree as well. We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have been
modularized. This is driven by the Google Android GKI initiative I
think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
pinctrl: stmfx: Use irqchip template
pinctrl: amd: Use irqchip template
pinctrl: mediatek: fix build for tristate changes
pinctrl: samsung: Use bank name as irqchip name
pinctrl: core: print gpio in pins debugfs file
pinctrl: mediatek: add mt6779 eint support
pinctrl: mediatek: add pinctrl support for MT6779 SoC
pinctrl: mediatek: avoid virtual gpio trying to set reg
pinctrl: mediatek: update pinmux definitions for mt6779
pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
pinctrl: mcp23s08: Use irqchip template
pinctrl: sx150x: Use irqchip template
dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
pinctrl: intel: Add Intel Emmitsburg pin controller support
pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
Revert "gpio: omap: handle pin config bias flags"
pinctrl: single: Use fallthrough pseudo-keyword
pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
pinctrl: baytrail: Use fallthrough pseudo-keyword
...
Core changes:
- Introduce the for_each_requested_gpio() macro to help in
dependent code all over the place. Also patch a few locations
to use it while we are at it.
- Split out the sysfs code into its own file.
- Split out the character device code into its own file, then
make a set of refactorings and improvements to this code.
We are setting the stage to revamp the userspace API a bit
in the next cycle.
- Fix a whole slew of kerneldoc that was wrong or missing.
New drivers:
- The PCA953x driver now supports the PCAL9535.
Driver improvements:
- A host of incremental modernizations and improvements to the
PCA953x driver.
- Incremental improvements to the Xilinx Zynq driver.
- Some improvements to the GPIO aggregator driver.
- I ran all over the place switching all threaded and other
drivers requesting their own IRQ while using the core
GPIO IRQ helpers to pass the GPIO irq chip as a template
instead of calling the explicit set-up functions. Next merge
window we may retire the old code altogether.
-----BEGIN PGP SIGNATURE-----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=OSvz
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.9 kernel cycle.
There is nothing too exciting in it, but a new macro that fixes a
build failure on a minor ARM32 platform that appeared yesterday is
part of it so we better merge it.
Core changes:
- Introduce the for_each_requested_gpio() macro to help in dependent
code all over the place. Also patch a few locations to use it while
we are at it.
- Split out the sysfs code into its own file.
- Split out the character device code into its own file, then make a
set of refactorings and improvements to this code. We are setting
the stage to revamp the userspace API a bit in the next cycle.
- Fix a whole slew of kerneldoc that was wrong or missing.
New drivers:
- The PCA953x driver now supports the PCAL9535.
Driver improvements:
- A host of incremental modernizations and improvements to the
PCA953x driver.
- Incremental improvements to the Xilinx Zynq driver.
- Some improvements to the GPIO aggregator driver.
- I ran all over the place switching all threaded and other drivers
requesting their own IRQ while using the core GPIO IRQ helpers to
pass the GPIO irq chip as a template instead of calling the
explicit set-up functions. Next merge window we may retire the old
code altogether"
* tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits)
gpio: wcove: Request IRQ after all initialisation done
gpio: crystalcove: Free IRQ on error path
gpio: pca953x: Request IRQ after all initialisation done
gpio: don't use same lockdep class for all devm_gpiochip_add_data users
gpio: max732x: Use irqchip template
gpio: stmpe: Move chip registration
gpio: rcar: Use irqchip template
gpio: regmap: fix type clash
gpio: Correct kernel-doc inconsistency
gpio: pci-idio-16: Use irqchip template
gpio: pcie-idio-24: Use irqchip template
gpio: 104-idio-16: Use irqchip template
gpio: 104-idi-48: Use irqchip template
gpio: 104-dio-48e: Use irqchip template
gpio: ws16c48: Use irqchip template
gpio: omap: improve coding style for pin config flags
gpio: dln2: Use irqchip template
gpio: sch: Add a blank line between declaration and code
gpio: sch: changed every 'unsigned' to 'unsigned int'
gpio: ich: changed every 'unsigned' to 'unsigned int'
...
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://lore.kernel.org/r/20200721131814.357182-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Sandeep Singh <sandeep.singh@amd.com>
Link: https://lore.kernel.org/r/20200722101545.144373-1-linus.walleij@linaro.org
Export mtk_is_virt_gpio() for the case when
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=m
to fix this build error:
ERROR: modpost: "mtk_is_virt_gpio" [drivers/pinctrl/mediatek/pinctrl-paris.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/d15827a3-d0c8-e231-9f61-8507b3d7be3a@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the bank name as the irqchip name. This name is later visible in
/proc/interrupts, what makes it possible to easily identify each
GPIO interrupt.
/proc/interrupts before this patch:
143: 0 exynos4210_wkup_irq_chip 7 Edge hdmi
144: 0 exynos4210_wkup_irq_chip 6 Level wm8994
145: 1 exynos4210_wkup_irq_chip 7 Edge max77686-pmic, max77686-rtc
146: 1 exynos_gpio_irq_chip 3 Edge 3-0048
/proc/interrupts after this patch:
143: 0 gpx3 7 Edge hdmi
144: 0 gpx3 6 Level wm8994
145: 1 gpx0 7 Edge max77686-pmic, max77686-rtc
146: 1 gpm2 3 Edge 3-0048
Handling of the eint_wake_mask_value has been reworked, because each bank
has now its own exynos_irq_chip structure allocated.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200720145412.24221-1-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
add driver setting to support mt6779 eint
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/1595503197-15246-6-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds MT6779 pinctrl driver based on MediaTek pinctrl-paris core.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/1595503197-15246-5-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
for virtual gpios, they should not do reg setting and
should behave as expected for eint function.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/1595503197-15246-4-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the hwspin_lock_timeout_in_atomic() API which is the most appropriated
here. Indeed:
- hwspin_lock_() is called after spin_lock_irqsave()
- the hwspin_lock_timeout() API relies on jiffies count which won't work
if IRQs are disabled which is the case here.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Link: https://lore.kernel.org/r/20200615124456.27328-1-alexandre.torgue@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Jason Kridner <jkridner@gmail.com>
Link: https://lore.kernel.org/r/20200721125223.344411-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200721132537.362160-1-linus.walleij@linaro.org
* New driver for Emmitsburg
* New driver for Tiger Lake-H
* Part 3 of Cherryview driver clean up
* Fix a glitch on Baytrail platforms
The following is an automated git shortlog grouped by driver:
ARM/orion/gpio:
- Make use of for_each_requested_gpio()
at91:
- Make use of for_each_requested_gpio()
baytrail:
- Use fallthrough pseudo-keyword
- Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
- Drop no-op ACPI_PTR() call
cherryview:
- Re-use data structures from pinctrl-intel.h (part 3)
- Convert chv_writel() to use chv_padreg()
- Introduce helpers to IO with common registers
- Introduce chv_readl() helper
gpio:
- xra1403: Make use of for_each_requested_gpio()
- mvebu: Make use of for_each_requested_gpio()
gpiolib:
- Introduce for_each_requested_gpio_in_range() macro
intel:
- Add Intel Emmitsburg pin controller support
- Make use of for_each_requested_gpio_in_range()
- Protect IO in few call backs by lock
- Split intel_config_get() to three functions
- Drop the only label in the code for consistency
- Get rid of redundant 'else' in intel_config_set_debounce()
- Make use of IRQ_RETVAL()
- Reduce scope of the lock
- Disable input and output buffer when switching to GPIO
- Allow drivers to define ACPI address space ID
- Allow drivers to define total amount of IRQs per community
lynxpoint:
- Drop no-op ACPI_PTR() call
- Introduce helpers to enable or disable input
- Make use of for_each_requested_gpio()
merrifield:
- Add I²S bus 2 pins to groups and functions
- Update pin names in accordance with official list
tigerlake:
- Add support for Tiger Lake-H
-----BEGIN PGP SIGNATURE-----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=8qjP
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.9-1
* New driver for Emmitsburg
* New driver for Tiger Lake-H
* Part 3 of Cherryview driver clean up
* Fix a glitch on Baytrail platforms
The following is an automated git shortlog grouped by driver:
ARM/orion/gpio:
- Make use of for_each_requested_gpio()
at91:
- Make use of for_each_requested_gpio()
baytrail:
- Use fallthrough pseudo-keyword
- Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
- Drop no-op ACPI_PTR() call
cherryview:
- Re-use data structures from pinctrl-intel.h (part 3)
- Convert chv_writel() to use chv_padreg()
- Introduce helpers to IO with common registers
- Introduce chv_readl() helper
gpio:
- xra1403: Make use of for_each_requested_gpio()
- mvebu: Make use of for_each_requested_gpio()
gpiolib:
- Introduce for_each_requested_gpio_in_range() macro
intel:
- Add Intel Emmitsburg pin controller support
- Make use of for_each_requested_gpio_in_range()
- Protect IO in few call backs by lock
- Split intel_config_get() to three functions
- Drop the only label in the code for consistency
- Get rid of redundant 'else' in intel_config_set_debounce()
- Make use of IRQ_RETVAL()
- Reduce scope of the lock
- Disable input and output buffer when switching to GPIO
- Allow drivers to define ACPI address space ID
- Allow drivers to define total amount of IRQs per community
lynxpoint:
- Drop no-op ACPI_PTR() call
- Introduce helpers to enable or disable input
- Make use of for_each_requested_gpio()
merrifield:
- Add I²S bus 2 pins to groups and functions
- Update pin names in accordance with official list
tigerlake:
- Add support for Tiger Lake-H
This driver adds pinctrl/GPIO support for Intel Emmitsburg PCH. The
GPIO controller is based on the next generation GPIO hardware but still
compatible with the one supported by the Intel core pinctrl/GPIO driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718120807.19714-1-grandmaster@al2klimov.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the new RZ/G2H (R8A774E1) SoC,
- One more conversion of DT bindings to json-schema,
- Fix RZ/A1 kerneldoc.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXxFr1gAKCRCKwlD9ZEnx
cDc7AP9JzGD321z5fo+QZjDriUlo2Mzj1cSs8chrFltwOZo+1wEAtIZlPcHHYud0
y87+3A8qhKewBWlNyfLHoN9POxLgEA0=
=ztO8
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v5.9 (take two)
- Add support for the new RZ/G2H (R8A774E1) SoC,
- One more conversion of DT bindings to json-schema,
- Fix RZ/A1 kerneldoc.
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200713183541.36963-1-grandmaster@al2klimov.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
'struct amd_gpio_acpi_match' becomes defined but unused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-amd.c:959:36: warning: ‘amd_gpio_acpi_match’ defined but not used [-Wunused-const-variable=]
959 | static const struct acpi_device_id amd_gpio_acpi_match[] = {
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ken Xue <Ken.Xue@amd.com>
Cc: "Wu, Jeff" <Jeff.Wu@amd.com>
Cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Cc: Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-26-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Correct misspellings and provide missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'start_pin' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'val' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_pin' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_npins' not described in 'armada_37xx_pin_group'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-25-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It has never been used.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/meson/pinctrl-meson-a1.c:749:27: warning: ‘i2c_slave_groups’ defined but not used [-Wunused-const-variable=]
749 | static const char const i2c_slave_groups[] = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Qianggui Song <qianggui.song@amlogic.com>
Cc: linux-amlogic@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-24-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add some missing attributes/parameter descriptions, remove other
superfluous ones, add struct header titles and fix misspellings.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals'
drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function'
drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function'
drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin'
drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry'
drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle'
drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle'
drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: linux-omap@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Depending on how you look at it, you can either say that:
a) There is a PDC hardware issue (with the specific IP rev that exists
on sc7180) that causes the PDC not to work properly when configured
to handle dual edges.
b) The dual edge feature of the PDC hardware was only added in later
HW revisions and thus isn't in all hardware.
Regardless of how you look at it, let's work around the lack of dual
edge support by only ever letting our parent see requests for single
edge interrupts on affected hardware.
NOTE: it's possible that a driver requesting a dual edge interrupt
might get several edges coalesced into a single IRQ. For instance if
a line starts low and then goes high and low again, the driver that
requested the IRQ is not guaranteed to be called twice. However, it
is guaranteed that once the driver's interrupt handler starts running
its first instruction that any new edges coming in will cause the
interrupt to fire again. This is relatively commonplace for dual-edge
gpio interrupts (many gpio controllers require software to emulate
dual edge with single edge) so client drivers should be setup to
handle it.
Fixes: e35a6ae0eb ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200714080254.v3.1.Ie0d730120b232a86a4eac1e2909bcbec844d1766@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Demote headers which are clearly not kerneldoc, provide titles for
struct definition blocks, fix API slip (bitrot) misspellings and
provide some missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux '
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand * @drv_type: drive strength variant using rockchip_perpin_drv_type
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand * @reg_base: register base of the gpio bank
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data'
drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand */
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group'
drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-rockchip@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-20-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pctrldev' not described in 'bm1880_pinctrl'
drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pinconf' not described in 'bm1880_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-19-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The documentation header for 'struct at91_pinctrl_mux_ops' was missing
entries for {g,s}et_drivestrength and {g,s}et_slewrate.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91.c:77: warning: cannot understand function prototype: 'enum drive_strength_bit '
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_drivestrength' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_drivestrength' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_slewrate' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_slewrate' not described in 'at91_pinctrl_mux_ops'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-18-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_wakeup_sources' not described in 'atmel_pioctrl'
drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_suspend_backup' not described in 'atmel_pioctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-16-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix a spelling/typo while we're here.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinconf-generic.c:242: warning: Function parameter or member 'pctldev' not described in 'pinconf_generic_parse_dt_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-15-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'map' not described in 'pinctrl_dt_map'
drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'num_maps' not described in 'pinctrl_dt_map'
drivers/pinctrl/devicetree.c:409: warning: Function parameter or member 'out_args' not described in 'pinctrl_parse_index_with_args'
drivers/pinctrl/devicetree.c:409: warning: Excess function parameter 'out_arts' description in 'pinctrl_parse_index_with_args'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-14-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
And rename another which has probably bitrotted.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinmux.c:83: warning: Function parameter or member 'pctldev' not described in 'pinmux_can_be_used_for_gpio'
drivers/pinctrl/pinmux.c:108: warning: Function parameter or member 'pctldev' not described in 'pin_request'
drivers/pinctrl/pinmux.c:261: warning: Function parameter or member 'gpio' not described in 'pinmux_request_gpio'
drivers/pinctrl/pinmux.c:751: warning: Function parameter or member 'selector' not described in 'pinmux_generic_get_function'
drivers/pinctrl/pinmux.c:751: warning: Excess function parameter 'group_selector' description in 'pinmux_generic_get_function'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-13-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most are likely due to bitrot/API slip. Some are formatting issues.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/core.c:167: warning: Function parameter or member 'pin' not described in 'pin_get_name'
drivers/pinctrl/core.c:167: warning: Excess function parameter 'name' description in 'pin_get_name'
drivers/pinctrl/core.c:584: warning: Function parameter or member 'selector' not described in 'pinctrl_generic_get_group'
drivers/pinctrl/core.c:584: warning: Excess function parameter 'gselector' description in 'pinctrl_generic_get_group'
drivers/pinctrl/core.c:1356: error: Cannot parse struct or union!
drivers/pinctrl/core.c:1458: warning: Function parameter or member 'map' not described in 'pinctrl_unregister_mappings'
drivers/pinctrl/core.c:1458: warning: Excess function parameter 'maps' description in 'pinctrl_unregister_mappings'
drivers/pinctrl/core.c:2239: warning: Function parameter or member 'pctldev' not described in 'devm_pinctrl_register_and_init'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-12-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not all sourcefiles which end up including pinctrl-mtk-common-v2.h make use
of 'mtk_default_register_base_names' and there is nowhere we can place the
definition to void the need for __maybe_unused except its own headerfile,
which seems like overkill. So instead we tell the compiler that it's okay
for it to be unused by some of the consumers.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:19:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-moore.h:25,
from drivers/pinctrl/mediatek/pinctrl-moore.c:12:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-paris.c:15:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h:15,
from drivers/pinctrl/mediatek/pinctrl-mt6797.c:13:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt8183.h:12,
from drivers/pinctrl/mediatek/pinctrl-mt8183.c:9:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt6765.h:12,
from drivers/pinctrl/mediatek/pinctrl-mt6765.c:10:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-11-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/qcom/pinctrl-msm8976.c:802:27: warning: ‘nav_tsync_groups’ defined but not used [-Wunused-const-variable=]
802 | static const char
const nav_tsync_groups[] = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Del Regno <kholk11@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-10-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kerneldoc struct titles must be followed by whitespace else the
checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-s3c64xx.c:212: warning: cannot understand function prototype: 'struct s3c64xx_eint0_domain_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-9-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kerneldoc struct titles must be followed by whitespace. Also attributes
need to be in the format '@.*: ' else the checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-s3c24xx.c💯 warning: cannot understand function prototype: 'struct s3c24xx_eint_domain_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-8-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-samsung.c:1149: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_suspend'
drivers/pinctrl/samsung/pinctrl-samsung.c:1199: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_resume'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-7-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add missing descriptions for attributes and fix 1 formatting issue.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'desc' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'irq_chip' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'intr_target_use_scm' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'soc' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'phys_base' not described in 'msm_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-6-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Function parameter or member 'chip' not described in 'iproc_set_bit'
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Excess function parameter 'iproc_gpio' description in 'iproc_set_bit'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Link: https://lore.kernel.org/r/20200713144930.1034632-5-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There has been little to no attempt to document any of the demoted
structures here. These are obviously not kerneldoc headers.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:65: warning: cannot understand function prototype: 'enum bcm281xx_pin_type '
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:79: warning: cannot understand function prototype: 'struct bcm281xx_pin_function '
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:89: warning: cannot understand function prototype: 'struct bcm281xx_pinctrl_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-4-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>From ill formatted kerneldoc, to incomplete *and* incorrect struct headers,
through to formatting issues and missing attribute descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/sirf/pinctrl-atlas7.c:197: warning: Function parameter or member 'id' not described in 'atlas7_pad_config'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'func' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'pull' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'dstr' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'reserved' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:359: warning: Cannot understand * @dev: a pointer back to containing device
on line 359 - I thought it was a doc line
drivers/pinctrl/sirf/pinctrl-atlas7.c:4794: warning: Function parameter or member 'pad_type' not described in 'atlas7_pull_info'
drivers/pinctrl/sirf/pinctrl-atlas7.c:4917: warning: Function parameter or member 'reserved' not described in 'atlas7_ds_info'
drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'a7gc' not described in 'atlas7_gpio_to_bank'
drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'gpio' not described in 'atlas7_gpio_to_bank'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-3-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'clk' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq_chip' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'num_irq' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq' not described in 'owl_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: David Liu <liuwei@actions-semi.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-2-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based
WiFi APs. ]
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Link: https://lore.kernel.org/r/20200703080646.23233-1-computersforpeace@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The default pinmux configuration for Y23 is to route a heartbeat to
drive a LED. Previous revisions of the AST2600 datasheet did not include
a description of this function.
Fixes: 2eda1cdec4 ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200701030756.2834657-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to iterate over each pin in a group for a function and
disable higher priority mux configurations on the pin before finally
muxing the relevant function's signal. With the current debug output it
is hard to track what register output is relevant to which operation, so
break up the actions in the debug output by providing some more context.
Before:
[ 5.446656] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: request pin 37 (B26) for 1e780000.gpio:341
[ 5.447377] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.447854] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.448340] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
After:
[ 5.298053] Muxing pin 37 for GPIO
[ 5.298294] Disabling signal NRI4 for NRI4
[ 5.298593] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.298983] Disabling signal RGMII4RXD1 for RGMII4
[ 5.299309] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.299694] Disabling signal RMII4RXD1 for RMII4
[ 5.300014] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.300396] Enabling signal GPIOE5 for GPIOE5
[ 5.300687] Muxed pin 37 as GPIOE5
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200701030039.2834418-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some description blocks are void of any description/documentation,
others are missing 'struct' identifiers, there are also a couple of
misspellings of function parameter names. Fix all of them.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-rza1.c:81: warning: cannot understand function prototype: 'struct rza1_bidir_pin '
drivers/pinctrl/pinctrl-rza1.c:90: warning: cannot understand function prototype: 'struct rza1_bidir_entry '
drivers/pinctrl/pinctrl-rza1.c:98: warning: cannot understand function prototype: 'struct rza1_swio_pin '
drivers/pinctrl/pinctrl-rza1.c:108: warning: cannot understand function prototype: 'struct rza1_swio_entry '
drivers/pinctrl/pinctrl-rza1.c:116: warning: cannot understand function prototype: 'struct rza1_pinmux_conf '
drivers/pinctrl/pinctrl-rza1.c:443: warning: cannot understand function prototype: 'struct rza1_mux_conf '
drivers/pinctrl/pinctrl-rza1.c:462: warning: cannot understand function prototype: 'struct rza1_port '
drivers/pinctrl/pinctrl-rza1.c:482: warning: cannot understand function prototype: 'struct rza1_pinctrl '
drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'port' not described in 'rza1_pinmux_get_flags'
drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'pin' not described in 'rza1_pinmux_get_flags'
drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'func' not described in 'rza1_pinmux_get_flags'
drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pinmux_get_flags'
drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'port' not described in 'rza1_set_bit'
drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'reg' not described in 'rza1_set_bit'
drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'bit' not described in 'rza1_set_bit'
drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'set' not described in 'rza1_set_bit'
drivers/pinctrl/pinctrl-rza1.c:672: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pin_mux_single'
drivers/pinctrl/pinctrl-rza1.c:672: warning: Excess function parameter 'pinctrl' description in 'rza1_pin_mux_single'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-21-lee.jones@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas RZ/G2H (r8a774e1) is pin compatible with R-Car H3 (R8A77951),
however it doesn't have several automotive specific peripherals. Add
automotive-specific pin groups/functions along with common pin
groups/functions for supporting both r8a77951 and r8a774e1 SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-13-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rather than always using handle_simple_irq() as the gpio_irq_chip
handler, set a more appropriate handler based on the IRQ trigger type
requested. This is important for level triggered interrupts which need
to be masked during handling. Also, fix the interrupt acknowledge so
that it clears only one interrupt instead of all interrupts which are
currently active. Finally there is no need to clear the interrupt during
the interrupt handler, since the edge-triggered handler will do that for
us.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20200703011830.15655-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This change drops the override in `amd_gpio_irq_set_type()` that
ignores the IRQ trigger type settings from the caller. The device
driver (caller) is in a better position to identify the right trigger
type for the device based on the usage as well as the information
exposed by the BIOS. There are instances where the device driver might
want to configure the trigger type differently in different modes. An
example of this is gpio-keys driver which configures IRQ type as
trigger on both edges (to identify assert and deassert events) when in
S0 and reconfigures the trigger type using the information provided by
the BIOS when going into suspend to ensure that the wake happens on
the required edge.
This override in `amd_gpio_irq_set_type()` prevents the caller from
being able to reconfigure trigger type once it is set either based on
ACPI information or the type used by the first caller for IRQ on a
given GPIO line.
Without this change, pen-insert gpio key (used by garaged stylus on a
Chromebook) works fine in S0 (i.e. insert and eject events are
correctly identified), however, BIOS configuration for wake on only
pen eject i.e. only-rising edge or only-falling edge is not honored.
With this change, it was verified that pen-insert gpio key behavior is
correct in both S0 and for wakeup from S3.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Shyam Sundar S K<Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20200626211026.513520-1-furquan@google.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PAT1 register contains information about the IRQ type (edge/level)
for input GPIOs with IRQ enabled, and the direction for non-IRQ GPIOs.
So it makes sense to read it only if the GPIO has no interrupt
configured, otherwise input GPIOs configured for level IRQs are
misdetected as output GPIOs.
Fixes: ebd6651418 ("pinctrl: ingenic: Implement .get_direction for GPIO chips")
Reported-by: João Henrique <johnnyonflame@hotmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200622214548.265417-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ingenic SoCs don't natively support registering an interrupt for both
rising and falling edges. This has to be emulated in software.
Until now, this was emulated by switching back and forth between
IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING according to the level of
the GPIO. While this worked most of the time, when used with GPIOs that
need debouncing, some events would be lost. For instance, between the
time a falling-edge interrupt happens and the interrupt handler
configures the hardware for rising-edge, the level of the pin may have
already risen, and the rising-edge event is lost.
To address that issue, instead of switching back and forth between
IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING, we now switch back and
forth between IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_LEVEL_HIGH. Since we
always switch in the interrupt handler, they actually permit to detect
level changes. In the example above, if the pin level rises before
switching the IRQ type from IRQ_TYPE_LEVEL_LOW to IRQ_TYPE_LEVEL_HIGH,
a new interrupt will raise as soon as the handler exits, and the
rising-edge event will be properly detected.
Fixes: e72394e2ea ("pinctrl: ingenic: Merge GPIO functionality")
Reported-by: João Henrique <johnnyonflame@hotmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: João Henrique <johnnyonflame@hotmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200622214548.265417-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for pm660(l) SPMI GPIOs. The PMICs feature
13 and 12 GPIOs respectively, though with a lot of
holes inbetween.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622192558.152828-2-konradybcio@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This add support for Sparx5 pinctrl, using the ocelot drives as
basis. It adds pinconfig support as well, as supported by the
platform.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200615133242.24911-6-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If a GPIO bank has greater than 16 pins, PAD_DS_REG is split into two
or more registers. However, when register and bit were calculated, the
first register defined in the bank was used, and the bit was calculated
based on the first pin. This causes problems in setting the driving
strength.
The following method was used to solve this problem:
A bit is calculated first using predefined strides. Then, If the bit is
32 or more, the register is changed by the quotient of the bit divided
by 32. And the bit is set to the remainder.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Link: https://lore.kernel.org/r/20200618025916.GA19368@home-desktop
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the correct the function name in the documentation for
"pcs_parse_one_pinctrl_entry()".
"smux_parse_one_pinctrl_entry()" appears to be an artifact from the
development of a prior patch series ("simple pinmux driver") which
transformed into pinctrl-single.
Fixes: 8b8b091bf0 ("pinctrl: Add one-register-per-pin type device tree based pinctrl driver")
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20200617180543.GA4186054@x1
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If "pinctrl-single,pins" has 3 arguments (offset, conf, mux), then
pcs_parse_one_pinctrl_entry() does an OR operation on conf and mux to
get the value to store in the register.
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Link: https://lore.kernel.org/r/20200701013320.130441-2-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Export necessary APIs to support i.MX8 SCU SoCs pinctrl driver to be
built as module.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/1592979844-18833-3-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Export necessary APIs to support i.MX8 SoCs pinctrl driver to be
built as module.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/1592979844-18833-2-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add RPC (HyperFlash and Octal-SPI Flash) pin groups on R-Car V3H and
V3M.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXv8eOQAKCRCKwlD9ZEnx
cMM1AP9PwW0xGLxy1S+/RiGhu6gl4QNPgwko7rdvrMxNYQXwowD+OsXCq2/CwSJk
BE7Fw1X5j/yWZ4mkLIPReVo4PSvfyA8=
=On87
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v5.9
- Add RPC (HyperFlash and Octal-SPI Flash) pin groups on R-Car V3H and
V3M.
Intel Tiger Lake-H has different pin layout than the -LP variant
so add support for this to the existing Tiger Lake driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It is useful to control I²S bus 2 pins if we would like to connect
an audio codec.
Reported-by: mouse <xllacyx@gmail.com>
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Fix output pin value handling on Intel Baytrail
The following is an automated git shortlog grouped by driver:
baytrail:
- Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
-----BEGIN PGP SIGNATURE-----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=ju6S
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.8-2
* Fix output pin value handling on Intel Baytrail
The following is an automated git shortlog grouped by driver:
baytrail:
- Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
The pins on the Bay Trail SoC have separate input-buffer and output-buffer
enable bits and a read of the level bit of the value register will always
return the value from the input-buffer.
The BIOS of a device may configure a pin in output-only mode, only enabling
the output buffer, and write 1 to the level bit to drive the pin high.
This 1 written to the level bit will be stored inside the data-latch of the
output buffer.
But a subsequent read of the value register will return 0 for the level bit
because the input-buffer is disabled. This causes a read-modify-write as
done by byt_gpio_set_direction() to write 0 to the level bit, driving the
pin low!
Before this commit byt_gpio_direction_output() relied on
pinctrl_gpio_direction_output() to set the direction, followed by a call
to byt_gpio_set() to apply the selected value. This causes the pin to
go low between the pinctrl_gpio_direction_output() and byt_gpio_set()
calls.
Change byt_gpio_direction_output() to directly make the register
modifications itself instead. Replacing the 2 subsequent writes to the
value register with a single write.
Note that the pinctrl code does not keep track internally of the direction,
so not going through pinctrl_gpio_direction_output() is not an issue.
This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is
already on at boot (no external monitor connected), then the i915 driver
does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The
temporarily going low of that GPIO was causing the panel to reset itself
after which it would not show an image until it was turned off and back on
again (until a full modeset was done on it). This commit fixes this.
This commit also updates the byt_gpio_direction_input() to use direct
register accesses instead of going through pinctrl_gpio_direction_input(),
to keep it consistent with byt_gpio_direction_output().
Note for backporting, this commit depends on:
commit e2b74419e5 ("pinctrl: baytrail: Replace WARN with dev_info_once
when setting direct-irq pin to output")
Cc: stable@vger.kernel.org
Fixes: 86e3ef812f ("pinctrl: baytrail: Update gpio chip operations")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
