commit 2f56acf818 upstream.
The ACONNECT bus driver does not use pm-clk interface anymore and hence
the dependency can be removed from its Kconfig option.
Fixes: 0d7dab9261 ("bus: tegra-aconnect: use devm_clk_*() helpers")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78e06cf430 upstream.
In the flowtable documentation there is a missing semicolon, the command
as is would give this error:
nftables.conf:5:27-33: Error: syntax error, unexpected devices, expecting newline or semicolon
hook ingress priority 0 devices = { br0, pppoe-data };
^^^^^^^
nftables.conf:4:12-13: Error: invalid hook (null)
flowtable ft {
^^
Fixes: 19b351f16f ("netfilter: add flowtable documentation")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf3e204a1c upstream.
info->key.tp_src and tp_dst are __be16, when using nla_put_be16()
to dump them, htons() is not needed, so remove it in this patch.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1ff6fc22f upstream.
At the time the brcmstb_thermal driver and its binding were merged, the
DT binding did not make the coefficients properties a mandatory one,
therefore all users of the brcmstb_thermal driver out there have a non
functional implementation with zero coefficients. Even if these
properties were provided, the formula used for computation is incorrect.
The coefficients are entirely process specific (right now, only 28nm is
supported) and not board or SoC specific, it is therefore appropriate to
hard code them in the driver given the compatibility string we are
probed with which has to be updated whenever a new process is
introduced.
We remove the existing coefficients definition since subsequent patches
are going to add support for a new process and will introduce new
coefficients as well.
Fixes: 9e03cf1b2d ("thermal: add brcmstb AVS TMON driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c56dcfa3d4 upstream.
We are not interested in getting this debug print on our
console all the time.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Fixes: 6c375eccde ("thermal: db8500: Rewrite to be a pure OF sensor")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191119074650.2664-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 155fc6ba48 upstream.
On alpha and s390x:
fs/ubifs/debug.h:158:11: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘ino_t {aka unsigned int}’ [-Wformat=]
...
fs/ubifs/orphan.c:132:3: note: in expansion of macro ‘dbg_gen’
dbg_gen("deleted twice ino %lu", orph->inum);
...
fs/ubifs/orphan.c:140:3: note: in expansion of macro ‘dbg_gen’
dbg_gen("delete later ino %lu", orph->inum);
__kernel_ino_t is "unsigned long" on most architectures, but not on
alpha and s390x, where it is "unsigned int". Hence when printing an
ino_t, it should always be cast to "unsigned long" first.
Fix this by re-adding the recently removed casts.
Fixes: 8009ce956c ("ubifs: Don't leak orphans on memory during commit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bc6b745e5 upstream.
The current expedited RCU grace-period code expects that a task
requesting an expedited grace period cannot awaken until that grace
period has reached the wakeup phase. However, it is possible for a long
preemption to result in the waiting task never sleeping. For example,
consider the following sequence of events:
1. Task A starts an expedited grace period by invoking
synchronize_rcu_expedited(). It proceeds normally up to the
wait_event() near the end of that function, and is then preempted
(or interrupted or whatever).
2. The expedited grace period completes, and a kworker task starts
the awaken phase, having incremented the counter and acquired
the rcu_state structure's .exp_wake_mutex. This kworker task
is then preempted or interrupted or whatever.
3. Task A resumes and enters wait_event(), which notes that the
expedited grace period has completed, and thus doesn't sleep.
4. Task B starts an expedited grace period exactly as did Task A,
complete with the preemption (or whatever delay) just before
the call to wait_event().
5. The expedited grace period completes, and another kworker
task starts the awaken phase, having incremented the counter.
However, it blocks when attempting to acquire the rcu_state
structure's .exp_wake_mutex because step 2's kworker task has
not yet released it.
6. Steps 4 and 5 repeat, resulting in overflow of the rcu_node
structure's ->exp_wq[] array.
In theory, this is harmless. Tasks waiting on the various ->exp_wq[]
array will just be spuriously awakened, but they will just sleep again
on noting that the rcu_state structure's ->expedited_sequence value has
not advanced far enough.
In practice, this wastes CPU time and is an accident waiting to happen.
This commit therefore moves the rcu_exp_gp_seq_end() call that officially
ends the expedited grace period (along with associate tracing) until
after the ->exp_wake_mutex has been acquired. This prevents Task A from
awakening prematurely, thus preventing more than one expedited grace
period from being in flight during a previous expedited grace period's
wakeup phase.
Fixes: 3b5f668e71 ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
[ paulmck: Added updated comment. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 208050dac5 upstream.
Remove a bogus clearing of apf.msr_val from kvm_arch_vcpu_destroy().
apf.msr_val is only set to a non-zero value by kvm_pv_enable_async_pf(),
which is only reachable by kvm_set_msr_common(), i.e. by writing
MSR_KVM_ASYNC_PF_EN. KVM does not autonomously write said MSR, i.e.
can only be written via KVM_SET_MSRS or KVM_RUN. Since KVM_SET_MSRS and
KVM_RUN are vcpu ioctls, they require a valid vcpu file descriptor.
kvm_arch_vcpu_destroy() is only called if KVM_CREATE_VCPU fails, and KVM
declares KVM_CREATE_VCPU successful once the vcpu fd is installed and
thus visible to userspace. Ergo, apf.msr_val cannot be non-zero when
kvm_arch_vcpu_destroy() is called.
Fixes: 344d9588a9 ("KVM: Add PV MSR to enable asynchronous page faults delivery.")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d979c7e6f upstream.
x86 does not load its MMU until KVM_RUN, which cannot be invoked until
after vCPU creation succeeds. Given that kvm_arch_vcpu_destroy() is
called if and only if vCPU creation fails, it is impossible for the MMU
to be loaded.
Note, the bogus kvm_mmu_unload() call was added during an unrelated
refactoring of vCPU allocation, i.e. was presumably added as an
opportunstic "fix" for a perceived leak.
Fixes: fb3f0f51d9 ("KVM: Dynamically allocate vcpus")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 536a0d8e79 upstream.
Currently, there are three static keys in the resctrl file system:
rdt_mon_enable_key and rdt_alloc_enable_key indicate if the monitoring
feature and the allocation feature are enabled, respectively. The
rdt_enable_key is enabled when either the monitoring feature or the
allocation feature is enabled.
If no monitoring feature is present (either hardware doesn't support a
monitoring feature or the feature is disabled by the kernel command line
option "rdt="), rdt_enable_key is still enabled but rdt_mon_enable_key
is disabled.
MBM is a monitoring feature. The MBM overflow handler intends to
check if the monitoring feature is not enabled for fast return.
So check the rdt_mon_enable_key in it instead of the rdt_enable_key as
former is the more accurate check.
[ bp: Massage commit message. ]
Fixes: e33026831b ("x86/intel_rdt/mbm: Handle counter overflow")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1576094705-13660-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604e2139a1 upstream.
When we moved zalloc.o to the library we missed gtk library which needs
it compiled in, otherwise the missing __zfree symbol will cause the
library to fail to load.
Adding the zalloc object to the gtk library build.
Fixes: 7f7c536f23 ("tools lib: Adopt zalloc()/zfree() from tools/perf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f7774033e upstream.
We need to set actions->ms.map since 599a2f38a9 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 599a2f38a9 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7cb3a1dd5 upstream.
This was found by coccicheck:
drivers/pwm/pwm-omap-dmtimer.c:304:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 255, but without a corresponding
object release within this function.
Reported-by: Markus Elfring <elfring@users.sourceforge.net>
Fixes: 6604c6556d ("pwm: Add PWM driver for OMAP using dual-mode timers")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f24c540f7 upstream.
The low resolution parts of the VDSO, i.e.:
clock_gettime(CLOCK_*_COARSE), clock_getres(), time()
can be used even if there is no VDSO capable clocksource.
But if an architecture opts out of the VDSO data update then this
information becomes stale. This affects ARM when there is no architected
timer available. The lack of update causes userspace to use stale data
forever.
Make the update of the low resolution parts unconditional and only skip
the update of the high resolution parts if the architecture requests it.
Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.765577901@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a6b55ac4a upstream.
The function name suggests that this is a boolean checking whether the
architecture asks for an update of the VDSO data, but it works the other
way round. To spare further confusion invert the logic.
Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.656652824@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f66c0447cc upstream.
Set the unoptimized flag after confirming the code is completely
unoptimized. Without this fix, when a kprobe hits the intermediate
modified instruction (the first byte is replaced by an INT3, but
later bytes can still be a jump address operand) while unoptimizing,
it can return to the middle byte of the modified code, which causes
an invalid instruction exception in the kernel.
Usually, this is a rare case, but if we put a probe on the function
call while text patching, it always causes a kernel panic as below:
# echo p text_poke+5 > kprobe_events
# echo 1 > events/kprobes/enable
# echo 0 > events/kprobes/enable
invalid opcode: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:text_poke+0x9/0x50
Call Trace:
arch_unoptimize_kprobe+0x22/0x28
arch_unoptimize_kprobes+0x39/0x87
kprobe_optimizer+0x6e/0x290
process_one_work+0x2a0/0x610
worker_thread+0x28/0x3d0
? process_one_work+0x610/0x610
kthread+0x10d/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x3a/0x50
text_poke() is used for patching the code in optprobes.
This can happen even if we blacklist text_poke() and other functions,
because there is a small time window during which we show the intermediate
code to other CPUs.
[ mingo: Edited the changelog. ]
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Fixes: 6274de4984 ("kprobes: Support delayed unoptimizing")
Link: https://lkml.kernel.org/r/157483422375.25881.13508326028469515760.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 483ec26eed upstream.
Keep the ima policy rules around from the beginning even if they appear
invalid at the time of loading, as they may become active after an lsm
policy load. However, loading a custom IMA policy with unknown LSM
labels is only safe after we have transitioned from the "built-in"
policy rules to a custom IMA policy.
Patch also fixes the rule re-use during the lsm policy reload and makes
some prints a bit more human readable.
Changelog:
v4:
- Do not allow the initial policy load refer to non-existing lsm rules.
v3:
- Fix too wide policy rule matching for non-initialized LSMs
v2:
- Fix log prints
Fixes: b169424551 ("ima: use the lsm policy update notifier")
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Konsta Karsisto <konsta.karsisto@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a44c71ccd upstream.
'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here
looks reversed.
Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep
the correct semantic.
In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8.
Fixes: 107dec2749 ("drivers: net: xgene: Add support for multiple queues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 468d020e2f upstream.
Driver should first check whether the sge is valid, then fill the valid
sge and the caculated total into hardware, otherwise invalid sges will
cause an error.
Fixes: 52e3b42a2f ("RDMA/hns: Filter for zero length of sge in hip08 kernel mode")
Fixes: 7bdee4158b ("RDMA/hns: Fill sq wqe context of ud type in hip08")
Link: https://lore.kernel.org/r/1578571852-13704-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4768820243 upstream.
Currently, the wqe idx is calculated repeatly everywhere it is used. This
patch defines wqe_idx and calculated it only once, then just use it as
needed.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e5e479a39 upstream.
As Youling reported in mailing list:
https://www.linuxquestions.org/questions/linux-newbie-8/the-file-system-f2fs-is-broken-4175666043/https://www.linux.org/threads/the-file-system-f2fs-is-broken.26490/
There is a test case can corrupt f2fs image:
- dd if=/dev/zero of=/swapfile bs=1M count=4096
- chmod 600 /swapfile
- mkswap /swapfile
- swapon --discard /swapfile
The root cause is f2fs_swap_activate() intends to return zero value
to setup_swap_extents() to enable SWP_FS mode (swap file goes through
fs), in this flow, setup_swap_extents() setups swap extent with wrong
block address range, result in discard_swap() erasing incorrect address.
Because f2fs_swap_activate() has pinned swapfile, its data block
address will not change, it's safe to let swap to handle IO through
raw device, so we can get rid of SWAP_FS mode and initial swap extents
inside f2fs_swap_activate(), by this way, later discard_swap() can trim
in right address range.
Fixes: 4969c06a0d ("f2fs: support swap file w/ DIO")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60588bfa22 upstream.
select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :
1ad3aaf3fc ("sched/core: Implement new approach to scale select_idle_cpu()")
introduces a way to limit how many CPUs we scan.
But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.
Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.
Fixes: 1ad3aaf3fc ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcfbc61754 upstream.
When reading/writing using the guest/host cache, check for a bad hva
before checking for a NULL memslot, which triggers the slow path for
handing cross-page accesses. Because the memslot is nullified on error
by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after
crossing into a new page, then the kvm_{read,write}_guest() slow path
could potentially write/access the first chunk prior to detecting the
bad hva.
Arguably, performing a partial access is semantically correct from an
architectural perspective, but that behavior is certainly not intended.
In the original implementation, memslot was not explicitly nullified
and therefore the partial access behavior varied based on whether the
memslot itself was null, or if the hva was simply bad. The current
behavior was introduced as a seemingly unintentional side effect in
commit f1b9dd5eb8 ("kvm: Disallow wraparound in
kvm_gfn_to_hva_cache_init"), which justified the change with "since some
callers don't check the return code from this function, it sit seems
prudent to clear ghc->memslot in the event of an error".
Regardless of intent, the partial access is dependent on _not_ checking
the result of the cache initialization, which is arguably a bug in its
own right, at best simply weird.
Fixes: 8f964525a1 ("KVM: Allow cross page reads and writes from cached translations.")
Cc: Jim Mattson <jmattson@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52918ed5fc upstream.
The KVM MMIO support uses bit 51 as the reserved bit to cause nested page
faults when a guest performs MMIO. The AMD memory encryption support uses
a CPUID function to define the encryption bit position. Given this, it is
possible that these bits can conflict.
Use svm_hardware_setup() to override the MMIO mask if memory encryption
support is enabled. Various checks are performed to ensure that the mask
is properly defined and rsvd_bits() is used to generate the new mask (as
was done prior to the change that necessitated this patch).
Fixes: 28a1f3ac1d ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs")
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c9f329b08 upstream.
Commit 7afb94da3c ("mwifiex: update set_mac_address logic") fixed the
only user of this function, partly because the author seems to have
noticed that, as written, it's on the borderline between highly
misleading and buggy.
Anyway, no sense in keeping dead code around: let's drop it.
Fixes: 7afb94da3c ("mwifiex: update set_mac_address logic")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70e5b8f445 upstream.
Before commit 1e58252e33 ("mwifiex: Fix heap overflow in
mmwifiex_process_tdls_action_frame()"),
mwifiex_process_tdls_action_frame() already had too many magic numbers.
But this commit just added a ton more, in the name of checking for
buffer overflows. That seems like a really bad idea.
Let's make these magic numbers a little less magic, by
(a) factoring out 'pos[1]' as 'ie_len'
(b) using 'sizeof' on the appropriate source or destination fields where
possible, instead of bare numbers
(c) dropping redundant checks, per below.
Regarding redundant checks: the beginning of the loop has this:
if (pos + 2 + pos[1] > end)
break;
but then individual 'case's include stuff like this:
if (pos > end - 3)
return;
if (pos[1] != 1)
return;
Note that the second 'return' (validating the length, pos[1]) combined
with the above condition (ensuring 'pos + 2 + length' doesn't exceed
'end'), makes the first 'return' (whose 'if' can be reworded as 'pos >
end - pos[1] - 2') redundant. Rather than unwind the magic numbers
there, just drop those conditions.
Fixes: 1e58252e33 ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b98149c23 upstream.
It's over-zealous to return hard errors under RCU-walk here, given that
a REF-walk will be triggered for all other cases handling ".." under
RCU.
The original purpose of this check was to ensure that if a rename occurs
such that a directory is moved outside of the bind-mount which the
resolution started in, it would be detected and blocked to avoid being
able to mess with paths outside of the bind-mount. However, triggering a
new REF-walk is just as effective a solution.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 397d425dc2 ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1fbfcb4a2 upstream.
Commit 2dffd23f81 ("kbuild: make single target builds much faster")
made the situation much better.
To improve it even more, apply the similar idea to the top Makefile.
Trim unrelated directories from build-dirs.
The single build code must be moved above the 'descend' target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35e046a203 upstream.
When single-build is set, everything in $(MAKECMDGOALS) is a single
target. You can use $(MAKECMDGOALS) to list out the single targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ecaf069da upstream.
Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.
It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcbb8461fd upstream.
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[ added to 5.4.y due to start of build warnings from backported patches
because of this feature - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9167c8078 upstream.
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 470793a78c upstream.
As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing
the key or indirection table using ethtool while keeping the same hash
function.
Also add a function for retrieving the current hash function from
the ena-com layer.
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 369537c970 upstream.
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be
zero for SMCD.
Fixes: c758dfddc1 ("net/smc: add SMC-D support in CLC messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 380ec5b9af upstream.
Code inspection found that in case of mapping error we do return current
'ret' value. But beside error, it is used to count number of descriptors
allocated for the packet. In that case map_skb function could return '1'.
Changing it to return zero (number of mapped descriptors for skb)
Fixes: 018423e90b ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4980919ad upstream.
skb->len is used to calculate statistics after xmit invocation.
Under a stress load it may happen that skb will be xmited,
rx interrupt will come and skb will be freed, all before xmit function
is even returned.
Eventually, skb->len will access unallocated area.
Moving stats calculation into tx_clean routine.
Fixes: 018423e90b ("net: ethernet: aquantia: Add ring support code")
Reported-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a20773bee upstream.
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().
CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes: 4f52090052 ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f3846f095 upstream.
When getting or setting VNICC parameters, the error code EOPNOTSUPP
should have precedence over EBUSY.
EBUSY is used because vnicc feature and bridgeport feature are mutually
exclusive, which is a temporary condition.
Whereas EOPNOTSUPP indicates that the HW does not support all or parts of
the vnicc feature.
This issue causes the vnicc sysfs params to show 'blocked by bridgeport'
for HW that does not support VNICC at all.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9515743bfb upstream.
Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.
Fixes: dabcefab45 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca4b43c14c upstream.
To work properly on every architectures and compilers, the enum value
needs to be specific numbers.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6f13c125e upstream.
When netvsc_attach() is called by operations like changing MTU, etc.,
an extra wakeup may happen while netvsc_attach() calling
rndis_filter_device_add() which sends rndis messages when queue is
stopped in netvsc_detach(). The completion message will wake up queue 0.
We can reproduce the issue by changing MTU etc., then the wake_queue
counter from "ethtool -S" will increase beyond stop_queue counter:
stop_queue: 0
wake_queue: 1
The issue causes queue wake up, and counter increment, no other ill
effects in current code. So we didn't see any network problem for now.
To fix this, initialize tx_disable to true, and set it to false when
the NIC is ready to be attached or registered.
Fixes: 7b2ee50c0c ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a04960560 upstream.
This if_change_rule is not working properly; it cannot detect any
command line change.
The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.
For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.
Fixes: 4f0e3a57d6 ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0daa63ed4c upstream.
The below-mentioned commit changed the code to unlock *inside*
the function, but previously the unlock was *outside*. It failed
to remove the outer unlock, however, leading to double unlock.
Fix this.
Fixes: 33483a6b88 ("mac80211: fix missing unlock on error in ieee80211_mark_sta_auth()")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20200221104719.cce4741cf6eb.I671567b185c8a4c2409377e483fd149ce590f56d@changeid
[rewrite commit message to better explain what happened]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b549c252b1 upstream.
Deleting dmabuf item's list head after releasing its container can lead
to KASAN-reported issue:
BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0
Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119
So fix this issue by puting deleting dmabuf_objs ahead of releasing its
container.
Fixes: dfb6ae4e14 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e661cedcc upstream.
The printout for txabrt is way too talkative and is highly annoying with
scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest
can be gained by I2C core debugging and datasheet information. Also,
make it a debug printout, it won't help the regular user.
Fixes: ba92222ed6 ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54498e8070 upstream.
Factor out 100 from the equation and do 32-bit arithmetic (3 * clk_mhz / 10)
instead of 64-bit.
Notice that clk_mhz is MHz, so the multiplication will never wrap 32 bits
and there is no need for div_u64().
Addresses-Coverity: 1458369 ("Unintentional integer overflow")
Fixes: 0560ad5762 ("i2c: altera: Add Altera I2C Controller driver")
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bef8e2dfce upstream.
Pointer on the memory allocated by 'alloc_progmem()' is stored in
'v->load_addr'. So this is this memory that should be freed by
'release_progmem()'.
'release_progmem()' is only a call to 'kfree()'.
With the current code, there is both a double free and a memory leak.
Fix it by passing the correct pointer to 'release_progmem()'.
Fixes: e01402b115 ("More AP / SP bits for the 34K, the Malta bits and things. Still wants")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: ralf@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>