Some architectures such as Alpha do not define _sdata but _data:
kernel/built-in.o: In function `core_kernel_data':
kernel/extable.c:77: undefined reference to `_sdata'
So expand the scope of the data range to the text addresses too,
this might be more correct anyway because this way we can
cover readonly variables as well.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-i878c8a0e0g0ep4v7i6vxnhz@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit e59fb3120b.
This reversion was due to (extreme) boot-time slowdowns on SPARC seen by
Yinghai Lu and on x86 by Ingo
.
This is a non-trivial reversion due to intervening commits.
Conflicts:
Documentation/RCU/trace.txt
kernel/rcutree.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some ARM SoCs have clock event devices which have their frequency
modified due to frequency scaling. Provide an interface which allows
to reconfigure an active device. After reconfiguration reprogram the
current pending event.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.437459958%40linutronix.de%3E
All clockevent devices have the same open coded initialization
functions. Provide an interface which does all necessary
initialization in the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.331975870%40linutronix.de%3E
Slow clocksources can have a way longer sleep time than 5 seconds and
even fast ones can easily cope with 600 seconds and still maintain
proper accuracy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.109811585%40linutronix.de%3E
The function is_exported() with its helper function lookup_symbol() are used to
verify if a provided symbol is effectively exported by the kernel or by the
modules. Now that both have their symbols sorted we can replace a linear search
with a binary search which provide a considerably speed-up.
This work was supported by a hardware donation from the CE Linux Forum.
Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Takes advantage of the order and locates symbols using binary search.
This work was supported by a hardware donation from the CE Linux Forum.
Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Dirk Behme <dirk.behme@googlemail.com>
Instead of having a callback function for each symbol in the kernel,
have a callback for each array of symbols.
This eases the logic when we move to sorted symbols and binary search.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Split the unprotect function into a function per section to make
the code more readable and add the missing static declaration.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
While debugging I stumbled over two problems in the code that protects module
pages.
First issue is that disabling the protection before freeing init or unload of
a module is not symmetric with the enablement. For instance, if pages are set
to RO the page range from module_core to module_core + core_ro_size is
protected. If a module is unloaded the page range from module_core to
module_core + core_size is set back to RW.
So pages that were not set to RO are also changed to RW.
This is not critical but IMHO it should be symmetric.
Second issue is that while set_memory_rw & set_memory_ro are used for
RO/RW changes only set_memory_nx is involved for NX/X. One would await that
the inverse function is called when the NX protection should be removed,
which is not the case here, unless I'm missing something.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reset mod->init_ro_size to zero after the init part of a module is unloaded.
Otherwise we need to check if module->init is NULL in the unprotect functions
in the next patch.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fix function prototype to be ANSI-C compliant, consistent with other
function prototypes, addressing a sparse warning.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On m68k natural alignment is 2-byte boundary but we are trying to
align structures in __modver section on sizeof(void *) boundary.
This causes trouble when we try to access elements in this section
in array-like fashion when create "version" attributes for built-in
modules.
Moreover, as DaveM said, we can't reliably put structures into
independent objects, put them into a special section, and then expect
array access over them (via the section boundaries) after linking the
objects together to just "work" due to variable alignment choices in
different situations. The only solution that seems to work reliably
is to make an array of plain pointers to the objects in question and
put those pointers in the special section.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since users of the function tracer can now pick and choose which
functions they want to trace agnostically from other users of the
function tracer, we need to pass the ops struct to the ftrace_set_filter()
functions.
The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
is added to keep the old filter functions which are used to modify
the generic function tracers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that functions may be selected individually, it only makes sense
that we should allow dynamically allocated trace structures to
be traced. This will allow perf to allocate a ftrace_ops structure
at runtime and use it to pick and choose which functions that
structure will trace.
Note, a dynamically allocated ftrace_ops will always be called
indirectly instead of being called directly from the mcount in
entry.S. This is because there's no safe way to prevent mcount
from being preempted before calling the function, unless we
modify every entry.S to do so (not likely). Thus, dynamically allocated
functions will now be called by the ftrace_ops_list_func() that
loops through the ops that are allocated if there are more than
one op allocated at a time. This loop is protected with a
preempt_disable.
To determine if an ftrace_ops structure is allocated or not, a new
util function was added to the kernel/extable.c called
core_kernel_data(), which returns 1 if the address is between
_sdata and _edata.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a hash is modified and might be in use, we need to perform
a schedule RCU operation on it, as the hashes will soon be used
directly in the function tracer callback.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is a step towards each ops structure defining its own set
of functions to trace. As the current code with pid's and such
are specific to the global_ops, it is restructured to be used
with the global ops.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to allow different ops to enable different functions,
the ftrace_startup() and ftrace_shutdown() functions need the
ops parameter passed to them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the enabled_functions file that is used to show all the
functions that have been enabled for tracing as well as their
ref counts. This helps seeing if any function has been registered
and what functions are being traced.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every function has its own record that stores the instruction
pointer and flags for the function to be traced. There are only
two flags: enabled and free. The enabled flag states that tracing
for the function has been enabled (actively traced), and the free
flag states that the record no longer points to a function and can
be used by new functions (loaded modules).
These flags are now moved to the MSB of the flags (actually just
the top 32bits). The rest of the bits (30 bits) are now used as
a ref counter. Everytime a tracer register functions to trace,
those functions will have its counter incremented.
When tracing is enabled, to determine if a function should be traced,
the counter is examined, and if it is non-zero it is set to trace.
When a ftrace_ops is registered to trace functions, its hashes
are examined. If the ftrace_ops filter_hash count is zero, then
all functions are set to be traced, otherwise only the functions
in the hash are to be traced. The exception to this is if a function
is also in the ftrace_ops notrace_hash. Then that function's counter
is not incremented for this ftrace_ops.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When filtering, allocate a hash to insert the function records.
After the filtering is complete, assign it to the ftrace_ops structure.
This allows the ftrace_ops structure to have a much smaller array of
hash buckets instead of wasting a lot of memory.
A read only empty_hash is created to be the minimum size that any ftrace_ops
can point to.
When a new hash is created, it has the following steps:
o Allocate a default hash.
o Walk the function records assigning the filtered records to the hash
o Allocate a new hash with the appropriate size buckets
o Move the entries from the default hash to the new hash.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Combine the filter and notrace hashes to be accessed by a single entity,
the global_ops. The global_ops is a ftrace_ops structure that is passed
to different functions that can read or modify the filtering of the
function tracer.
The ftrace_ops structure was modified to hold a filter and notrace
hashes so that later patches may allow each ftrace_ops to have its own
set of rules to what functions may be filtered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When multiple users are allowed to have their own set of functions
to trace, having the FTRACE_FL_FILTER flag will not be enough to
handle the accounting of those users. Each user will need their own
set of functions.
Replace the FTRACE_FL_FILTER with a filter_hash instead. This is
temporary until the rest of the function filtering accounting
gets in.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To prepare for the accounting system that will allow multiple users of
the function tracer, having the FTRACE_FL_NOTRACE as a flag in the
dyn_trace record does not make sense.
All ftrace_ops will soon have a hash of functions they should trace
and not trace. By making a global hash of functions not to trace makes
this easier for the transition.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Export handle_simple_irq, irq_modify_status, irq_alloc_descs,
irq_free_descs and generic_handle_irq to allow their usage in
modules. First user is IIO, which wants to be built modular, but needs
to be able to create irq chips, allocate and configure interrupt
descriptors and handle demultiplexing interrupts.
[ tglx: Moved the uninlinig of generic_handle_irq to a separate patch ]
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Link: http://lkml.kernel.org/r/%3C1305711544-505-1-git-send-email-jic23%40cam.ac.uk%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generic_handle_irq() is missing a NULL pointer check for the result of
irq_to_desc. This was a not a big problem, but we want to expose it to
drivers, so we better have sanity checks in place. Add a return value
as well, which indicates that the irq number was valid and the handler
was invoked.
Based on the pure code move from Jonathan Cameron.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
kernel/irq/ is only built when CONFIG_GENERIC_HARDIRQS=y. So making
code inside of kernel/irq/ conditional on CONFIG_GENERIC_HARDIRQS is
pointless.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If device drivers allocate substantial amounts of memory (above 1 MB)
in their hibernate .freeze() callbacks (or in their legacy suspend
callbcks during hibernation), the subsequent creation of hibernate
image may fail due to the lack of memory. This is the case, because
the drivers' .freeze() callbacks are executed after the hibernate
memory preallocation has been carried out and the preallocated amount
of memory may be too small to cover the new driver allocations.
Unfortunately, the drivers' .prepare() callbacks also are executed
after the hibernate memory preallocation has completed, so they are
not suitable for allocating additional memory either. Thus the only
way a driver can safely allocate memory during hibernation is to use
a hibernate/suspend notifier. However, the notifiers are called
before the freezing of user space and the drivers wanting to use them
for allocating additional memory may not know how much memory needs
to be allocated at that point.
To let device drivers overcome this difficulty rework the hibernation
sequence so that the memory preallocation is carried out after the
drivers' .prepare() callbacks have been executed, so that the
.prepare() callbacks can be used for allocating additional memory
to be used by the drivers' .freeze() callbacks. Update documentation
to match the new behavior of the code.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Now that we have CONFIG_DYNAMIC_DEBUG there is no need for yet
another flag causing dev_dbg() and pr_debug() statements in the
core PM code to produce output. Moreover, CONFIG_PM_VERBOSE
causes so much output to be generated that it's not really useful
and almost no one sets it.
References: https://bugzilla.kernel.org/show_bug.cgi?id=23182
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* power-domains:
PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
OMAP1 / PM: Use generic clock manipulation routines for runtime PM
PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)
PM / Runtime: Add subsystem data field to struct dev_pm_info
OMAP2+ / PM: move runtime PM implementation to use device power domains
PM / Platform: Use generic runtime PM callbacks directly
shmobile: Use power domains for platform runtime PM
PM: Export platform bus type's default PM callbacks
PM: Make power domain callbacks take precedence over subsystem ones
* syscore:
PM: Remove sysdev suspend, resume and shutdown operations
PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM
ARM / Samsung: Use struct syscore_ops for "core" power management
ARM / PXA: Use struct syscore_ops for "core" power management
ARM / SA1100: Use struct syscore_ops for "core" power management
ARM / Integrator: Use struct syscore_ops for core PM
ARM / OMAP: Use struct syscore_ops for "core" power management
ARM: Use struct syscore_ops instead of sysdevs for PM in common code
This reverts commit bea3864fb6
(PM / Hibernate: Reduce autotuned default image size), because users
are now able to resolve the issue this commit was supposed to address
in a different way (i.e. by using the new /sys/power/reserved_size
interface).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Martin reports that on his system hibernation occasionally fails due
to the lack of memory, because the radeon driver apparently allocates
too much of it during the device freeze stage. It turns out that the
amount of memory allocated by radeon during hibernation (and
presumably during system suspend too) depends on the utilization of
the GPU (e.g. hibernating while there are two KDE 4 sessions with
compositing enabled causes radeon to allocate more memory than for
one KDE 4 session).
In principle it should be possible to use image_size to make the
memory preallocation mechanism free enough memory for the radeon
driver, but in practice it is not easy to guess the right value
because of the way the preallocation code uses image_size. For this
reason, it seems reasonable to allow users to control the amount of
memory reserved for driver allocations made after the hibernate
preallocation, which currently is constant and amounts to 1 MB.
Introduce a new sysfs file, /sys/power/reserved_size, whose value
will be used as the amount of memory to reserve for the
post-preallocation reservations made by device drivers, in bytes.
For backwards compatibility, set its default (and initial) value to
the currently used number (1 MB).
References: https://bugzilla.kernel.org/show_bug.cgi?id=34102
Reported-and-tested-by: Martin Steigerwald <Martin@Lichtvoll.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
We need to prevent kernel-forked processes during system poweroff.
Such processes try to access the filesystem whose disks we are
trying to shutdown at the same time. This causes delays and exceptions
in the storage drivers.
A follow-up patch will add these calls and need usermodehelper_disable()
also on systems without suspend support.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Some drivers erroneously use request_firmware() from their ->resume()
(or ->thaw(), or ->restore()) callbacks, which is not going to work
unless the firmware has been built in. This causes system resume to
stall until the firmware-loading timeout expires, which makes users
think that the resume has failed and reboot their machines
unnecessarily. For this reason, make _request_firmware() print a
warning and return immediately with error code if it has been called
when tasks are frozen and it's impossible to start any new usermode
helpers.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
The freezer processes are dealing with multiple threads running
simultaneously, and on a UP system, the memory reads/writes do
not need barriers to keep things in sync. These are only needed
on SMP systems, so use SMP barriers instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The current implementation of suspend-to-RAM returns 0 if there is an
error from suspend_enter(), because suspend_devices_and_enter() ignores
the return value from suspend_enter(). This patch addresses this issue
and properly keep the error return from suspend_enter() and let
suspend_devices_and_enter relay the error return.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The first cpu which switches from periodic to oneshot mode switches
also the broadcast device into oneshot mode. The broadcast device
serves as a backup for per cpu timers which stop in deeper
C-states. To avoid starvation of the cpus which might be in idle and
depend on broadcast mode it marks the other cpus as broadcast active
and sets the brodcast expiry value of those cpus to the next tick.
The oneshot mode broadcast bit for the other cpus is sticky and gets
only cleared when those cpus exit idle. If a cpu was not idle while
the bit got set in consequence the bit prevents that the broadcast
device is armed on behalf of that cpu when it enters idle for the
first time after it switched to oneshot mode.
In most cases that goes unnoticed as one of the other cpus has usually
a timer pending which keeps the broadcast device armed with a short
timeout. Now if the only cpu which has a short timer active has the
bit set then the broadcast device will not be armed on behalf of that
cpu and will fire way after the expected timer expiry. In the case of
Christians bug report it took ~145 seconds which is about half of the
wrap around time of HPET (the limit for that device) due to the fact
that all other cpus had no timers armed which expired before the 145
seconds timeframe.
The solution is simply to clear the broadcast active bit
unconditionally when a cpu switches to oneshot mode after the first
cpu switched the broadcast device over. It's not idle at that point
otherwise it would not be executing that code.
[ I fundamentally hate that broadcast crap. Why the heck thought some
folks that when going into deep idle it's a brilliant concept to
switch off the last device which brings the cpu back from that
state? ]
Thanks to Christian for providing all the valuable debug information!
Reported-and-tested-by: Christian Hoffmann <email@christianhoffmann.info>
Cc: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/%3Calpine.LFD.2.02.1105161105170.3078%40ionos%3E
Cc: stable@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the inverse loadweight should be zero, function "calc_delta_mine"
calculates the inverse of "lw->weight" (in 32bit integer ops).
This calculation is actually a little bit impure (because it is
inverting something around "lw-weight"+1), especially when
"lw->weight" becomes smaller.
The correct inverse would be 1/lw->weight multiplied by
"WMULT_CONST" for fixcomma-scaling it into integers.
(So WMULT_CONST/lw->weight ...)
The old, impure algorithm took two divisions for inverting lw->weight,
the new, more exact one only takes one and an additional unlikely-if.
Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-0pz0wnyalr4tk4ln11xwumdx@git.kernel.org
[ This could explain some aritmetical issues for small shares but nothing
concrete has been reported yet so we are not confident enough to queue
this up in sched/urgent and for -stable backport. But if anyone finds
this commit and sees it to fix some badness then we can certainly
change our mind! ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If cpumask_equal(&p->cpus_allowed, new_mask) is true, seems
there is no reason to prevent set_cpus_allowed_ptr() return
directly.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110509140705.GA2219@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If an RT task is awakened while it's rt_rq is throttled, the time between
wakeup/enqueue and unthrottle/selection may be accounted as rt_time
if the CPU is idle. Set rq->skip_clock_update negative upon throttle
release to tell put_prev_task() that we need a clock update.
Reported-by: Thomas Giesel <skoe@directbox.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1304059010.7472.1.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is to fix the real-time scheduler bug reported at:
https://lkml.org/lkml/2011/4/26/13
That is, when running multiple real-time threads on every logical CPUs
and then turning off one CPU, the kernel will bug at function
__disable_runtime().
Function __disable_runtime() bugs and reports leakage of rt_rq runtime.
The root cause is __disable_runtime() assumes it iterates through all
the existing rt_rq's while walking rq->leaf_rt_rq_list, which actually
contains only runnable rt_rq's. This problem also applies to
__enable_runtime() and print_rt_stats().
The patch is based on above analysis, appears to fix the problem, but is
only lightly tested.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cheng Xu <chengxu@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4DCE1F12.6040609@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If !CONFIG_USERNS, have current_user_ns() defined to (&init_user_ns).
Get rid of _current_user_ns. This requires nsown_capable() to be
defined in capability.c rather than as static inline in capability.h,
so do that.
Request_key needs init_user_ns defined at current_user_ns if
!CONFIG_USERNS, so forward-declare that in cred.h if !CONFIG_USERNS
at current_user_ns() define.
Compile-tested with and without CONFIG_USERNS.
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
[ This makes a huge performance difference for acl_permission_check(),
up to 30%. And that is one of the hottest kernel functions for loads
that are pathname-lookup heavy. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wait_task_stopped() tested task_stopped_code() without acquiring
siglock and, if stop condition existed, called wait_task_stopped() and
directly returned the result. This patch moves the initial
task_stopped_code() testing into wait_task_stopped() and make
wait_consider_task() fall through to wait_task_continue() on 0 return.
This is for the following two reasons.
* Because the initial task_stopped_code() test is done without
acquiring siglock, it may race against SIGCONT generation. The
stopped condition might have been replaced by continued state by the
time wait_task_stopped() acquired siglock. This may lead to
unexpected failure of WNOHANG waits.
This reorganization addresses this single race case but there are
other cases - TASK_RUNNING -> TASK_STOPPED transition and EXIT_*
transitions.
* Scheduled ptrace updates require changes to the initial test which
would fit better inside wait_task_stopped().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
sched_fork() and wake_up_new_task() are defined with a parameter
'unsigned long clone_flags', which is unused.
This patch removes the parameters.
Signed-off-by: Samir Bellabes <sam@synack.fr>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1305130685-1047-1-git-send-email-sam@synack.fr
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since suspend, resume and shutdown operations in struct sysdev_class
and struct sysdev_driver are not used any more, remove them. Also
drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used
for executing those operations and modify all of their users
accordingly. This reduces kernel code size quite a bit and reduces
its complexity.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
The SNAPSHOT_S2RAM ioctl used for implementing the feature allowing
one to suspend to RAM after creating a hibernation image is currently
broken, because it doesn't clear the "ready" flag in the struct
snapshot_data object handled by it. As a result, the
SNAPSHOT_UNFREEZE doesn't work correctly after SNAPSHOT_S2RAM has
returned and the user space hibernate task cannot thaw the other
processes as appropriate. Make SNAPSHOT_S2RAM clear data->ready
to fix this problem.
Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
If the process using the hibernate user space interface closes
/dev/snapshot after creating a hibernation image without thawing
tasks, snapshot_release() should call pm_restore_gfp_mask() to
restore the GFP mask used before the creation of the image. Make
that happen.
Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
A warning is printed by pm_restrict_gfp_mask() while the
SNAPSHOT_S2RAM ioctl is being executed after creating a hibernation
image, because pm_restrict_gfp_mask() has been called once already
before the image creation and suspend_devices_and_enter() calls it
once again. This happens after commit 452aa6999e
(mm/pm: force GFP_NOIO during suspend/hibernation and resume).
To avoid this issue, move pm_restrict_gfp_mask() and
pm_restore_gfp_mask() from suspend_devices_and_enter() to its caller
in kernel/power/suspend.c.
Reported-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
The rcu callback swevent_hlist_release_rcu() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(swevent_hlist_release_rcu).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu callback free_ctx() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(free_ctx).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu callback __free_css_id_cb() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(__free_css_id_cb).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu callback free_cgroup_rcu() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(free_cgroup_rcu).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu callback free_css_set_rcu() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(free_css_set_rcu).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Avoid calling into the scheduler while holding core RCU locks. This
allows rcu_read_unlock() to be called while holding the runqueue locks,
but only as long as there was no chance of the RCU read-side critical
section having been preempted. (Otherwise, if RCU priority boosting
is enabled, rcu_read_unlock() might call into the scheduler in order to
unboost itself, which might allows self-deadlock on the runqueue locks
within the scheduler.)
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In case CONFIG_UEVENT_HELPER_PATH is not set to "", which it
should be on every system, the kernel forks processes during
shutdown, which try to access the rootfs, even when the
binary does not exist. It causes exceptions and long delays in
the disk driver, which gets read requests at the time it tries
to shut down the disk.
This patch disables all kernel-forked processes during reboot to
allow a clean poweroff.
Cc: Tejun Heo <htejun@gmail.com>
Tested-By: Anton Guda <atu@dmeti.dp.ua>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This partially reverts commit e6e1e25935.
That commit changed the structure layout of the trace structure, which
in turn broke PowerTOP (1.9x generation) quite badly.
I appreciate not wanting to expose the variable in question, and
PowerTOP was not using it, so I've replaced the variable with just a
padding field - that way if in the future a new field is needed it can
just use this padding field.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a given node, when constructing the cpumask for its
sched_domain to span, if there is no best node available after
searching, further efforts could be saved, based on small change
in the return value of find_next_best_node().
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/BANLkTi%3DqPWxRAa6%2BdT3ohEP6Z%3D0v%2Be4EXA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cfs_rq->nr_spread_over is only used when CONFIG_SCHED_DEBUG is set.
So wrap it with CONFIG_SCHED_DEBUG.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1304528026.15681.3.camel@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide rcu_virt_note_context_switch() for vitalization use to note
quiescent state during guest entry.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_sched_qs() currently calls local_irq_save()/local_irq_restore() up
to three times.
Remove irq masking from rcu_qsctr_help() / invoke_rcu_kthread()
and do it once in rcu_sched_qs() / rcu_bh_qs()
This generates smaller code as well.
text data bss dec hex filename
2314 156 24 2494 9be kernel/rcutiny.old.o
2250 156 24 2430 97e kernel/rcutiny.new.o
Fix an outdated comment for rcu_qsctr_help()
Move invoke_rcu_kthread() definition before its use.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit marks a first step towards making call_rcu() have
real-time behavior. If irqs are disabled, don't dive into the
RCU core. Later on, this new early exit will wake up the
per-CPU kthread, which first must be modified to handle the
cases involving callback storms.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although rcu_yield() dropped from real-time to normal priority, there
is always the possibility that the competing tasks have been niced.
So nice to 19 in rcu_yield() to help ensure that other tasks have a
better chance of running.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Many rcu callbacks functions just call kfree() on the base structure.
These functions are trivial, but their size adds up, and furthermore
when they are used in a kernel module, that module must invoke the
high-latency rcu_barrier() function at module-unload time.
The kfree_rcu() function introduced by this commit addresses this issue.
Rather than encoding a function address in the embedded rcu_head
structure, kfree_rcu() instead encodes the offset of the rcu_head
structure within the base structure. Because the functions are not
allowed in the low-order 4096 bytes of kernel virtual memory, offsets
up to 4095 bytes can be accommodated. If the offset is larger than
4095 bytes, a compile-time error will be generated in __kfree_rcu().
If this error is triggered, you can either fall back to use of call_rcu()
or rearrange the structure to position the rcu_head structure into the
first 4096 bytes.
Note that the allowable offset might decrease in the future, for example,
to allow something like kmem_cache_free_rcu().
The new kfree_rcu() function can replace code as follows:
call_rcu(&p->rcu, simple_kfree_callback);
where "simple_kfree_callback()" might be defined as follows:
void simple_kfree_callback(struct rcu_head *p)
{
struct foo *q = container_of(p, struct foo, rcu);
kfree(q);
}
with the following:
kfree_rcu(&p->rcu, rcu);
Note that the "rcu" is the name of a field in the structure being
freed. The reason for using this rather than passing in a pointer
to the base structure is that the above approach allows better type
checking.
This commit is based on earlier work by Lai Jiangshan and Manfred Spraul:
Lai's V1 patch: http://lkml.org/lkml/2008/9/18/1
Manfred's patch: http://lkml.org/lkml/2009/1/2/115
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The "preemptible" spelling is preferable. May as well fix it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Using __rcu_read_lock() in place of rcu_read_lock() leaves any debug
state as it really should be, namely with the lock still held.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This applies a trick from TREE_RCU boosting to TINY_RCU, eliminating
code and adding comments. The key point is that it is possible for
the booster thread itself to work out whether there is a normal or
expedited boost required based solely on local information. There
is therefore no need for boost initiation to know or care what type
of boosting is required. In addition, when boosting is complete for
a given grace period, then by definition there cannot be any more
boosting for that grace period. This allows eliminating yet more
state and statistics.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The ->boosted_this_gp field is a holdover from an earlier design that
was to carry out multiple boost operations in parallel. It is not required
by the current design, which boosts one task at a time.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Extraneous semicolon, bad comment, and fold INIT_LIST_HEAD() into
list_del() to get list_del_init().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This removes a couple of lines from invoke_rcu_cpu_kthread(), improving
readability.
Reported-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The CONFIG_DEBUG_OBJECTS_RCU_HEAD facility requires that on-stack RCU
callbacks be flagged explicitly to debug-objects using the
init_rcu_head_on_stack() and destroy_rcu_head_on_stack() functions.
This commit applies those functions to the rcutorture code that tests
RCU priority boosting.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The prohibition of DEBUG_OBJECTS_RCU_HEAD from !PREEMPT was due to the
fixup actions. So just produce a warning from !PREEMPT.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Increment a per-CPU counter on each pass through rcu_cpu_kthread()'s
service loop, and add it to the rcudata trace output.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds the age in jiffies of the current grace period along
with the duration in jiffies of the longest grace period since boot
to the rcu/rcugp debugfs file. It also adds an additional "O" state
to kthread tracing to differentiate between the kthread waiting due to
having nothing to do on the one hand and waiting due to being on the
wrong CPU on the other hand.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_initiate_boost_trace() function mis-attributed refusals to
initiate RCU priority boosting that were in fact due to its not yet
being time to boost. This patch fixes the faulty comparison.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is not possible to accurately correlate rcutorture output with that
of debugfs. This patch therefore adds a debugfs file that prints out
the rcutorture version number, permitting easy correlation.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Add tracing to help debugging situations when RCU's kthreads are not
running but are supposed to be.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds an indication of the state of the callback queue using
a string of four characters following the "ql=" integer queue length.
The first character is "N" if there are callbacks that have been
queued that are not yet ready to be handled by the next grace period, or
"." otherwise. The second character is "R" if there are callbacks queued
that are ready to be handled by the next grace period, or "." otherwise.
The third character is "W" if there are callbacks waiting for the current
grace period, or "." otherwise. Finally, the fourth character is "D"
if there are callbacks that have been handled by a prior grace period
and are waiting to be invoked, or ".".
Note that callbacks that are in the process of being invoked are
not shown. These callbacks would have been removed from the rcu_data
structure's list by rcu_do_batch() prior to being executed. (These
callbacks are also not reflected in the "ql=" total, FWIW.)
Also, document the new callback-queue trace information.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Includes total number of tasks boosted, number boosted on behalf of each
of normal and expedited grace periods, and statistics on attempts to
initiate boosting that failed for various reasons.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The n_rcu_torture_boost_allocerror and n_rcu_torture_boost_afferror
statistics are not actually incremented anymore, so eliminate them.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The scheduler does not appear to take kindly to having multiple
real-time threads bound to a CPU that is going offline. So this
commit is a temporary hack-around to avoid that happening.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If you are doing CPU hotplug operations, it is best not to have
CPU-bound realtime tasks running CPU-bound on the outgoing CPU.
So this commit makes per-CPU kthreads run at non-realtime priority
during that time.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The scheduler has had some heartburn in the past when too many real-time
kthreads were affinitied to the outgoing CPU. So, this commit lightens
the load by forcing the per-rcu_node and the boost kthreads off of the
outgoing CPU. Note that RCU's per-CPU kthread remains on the outgoing
CPU until the bitter end, as it must in order to preserve correctness.
Also avoid disabling hardirqs across calls to set_cpus_allowed_ptr(),
given that this function can block.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add priority boosting for TREE_PREEMPT_RCU, similar to that for
TINY_PREEMPT_RCU. This is enabled by the default-off RCU_BOOST
kernel parameter. The priority to which to boost preempted
RCU readers is controlled by the RCU_BOOST_PRIO kernel parameter
(defaulting to real-time priority 1) and the time to wait before
boosting the readers who are blocking a given grace period is
controlled by the RCU_BOOST_DELAY kernel parameter (defaulting to
500 milliseconds).
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If RCU priority boosting is to be meaningful, callback invocation must
be boosted in addition to preempted RCU readers. Otherwise, in presence
of CPU real-time threads, the grace period ends, but the callbacks don't
get invoked. If the callbacks don't get invoked, the associated memory
doesn't get freed, so the system is still subject to OOM.
But it is not reasonable to priority-boost RCU_SOFTIRQ, so this commit
moves the callback invocations to a kthread, which can be boosted easily.
Also add comments and properly synchronized all accesses to
rcu_cpu_kthread_task, as suggested by Lai Jiangshan.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Combine the current TREE_PREEMPT_RCU ->blocked_tasks[] lists in the
rcu_node structure into a single ->blkd_tasks list with ->gp_tasks
and ->exp_tasks tail pointers. This is in preparation for RCU priority
boosting, which will add a third dimension to the combinatorial explosion
in the ->blocked_tasks[] case, but simply a third pointer in the new
->blkd_tasks case.
Also update documentation to reflect blocked_tasks[] merge
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit d09b62d fixed grace-period synchronization, but left some smp_mb()
invocations in rcu_process_callbacks() that are no longer needed, but
sheer paranoia prevented them from being removed. This commit removes
them and provides a proof of correctness in their absence. It also adds
a memory barrier to rcu_report_qs_rsp() immediately before the update to
rsp->completed in order to handle the theoretical possibility that the
compiler or CPU might move massive quantities of code into a lock-based
critical section. This also proves that the sheer paranoia was not
entirely unjustified, at least from a theoretical point of view.
In addition, the old dyntick-idle synchronization depended on the fact
that grace periods were many milliseconds in duration, so that it could
be assumed that no dyntick-idle CPU could reorder a memory reference
across an entire grace period. Unfortunately for this design, the
addition of expedited grace periods breaks this assumption, which has
the unfortunate side-effect of requiring atomic operations in the
functions that track dyntick-idle state for RCU. (There is some hope
that the algorithms used in user-level RCU might be applied here, but
some work is required to handle the NMIs that user-space applications
can happily ignore. For the short term, better safe than sorry.)
This proof assumes that neither compiler nor CPU will allow a lock
acquisition and release to be reordered, as doing so can result in
deadlock. The proof is as follows:
1. A given CPU declares a quiescent state under the protection of
its leaf rcu_node's lock.
2. If there is more than one level of rcu_node hierarchy, the
last CPU to declare a quiescent state will also acquire the
->lock of the next rcu_node up in the hierarchy, but only
after releasing the lower level's lock. The acquisition of this
lock clearly cannot occur prior to the acquisition of the leaf
node's lock.
3. Step 2 repeats until we reach the root rcu_node structure.
Please note again that only one lock is held at a time through
this process. The acquisition of the root rcu_node's ->lock
must occur after the release of that of the leaf rcu_node.
4. At this point, we set the ->completed field in the rcu_state
structure in rcu_report_qs_rsp(). However, if the rcu_node
hierarchy contains only one rcu_node, then in theory the code
preceding the quiescent state could leak into the critical
section. We therefore precede the update of ->completed with a
memory barrier. All CPUs will therefore agree that any updates
preceding any report of a quiescent state will have happened
before the update of ->completed.
5. Regardless of whether a new grace period is needed, rcu_start_gp()
will propagate the new value of ->completed to all of the leaf
rcu_node structures, under the protection of each rcu_node's ->lock.
If a new grace period is needed immediately, this propagation
will occur in the same critical section that ->completed was
set in, but courtesy of the memory barrier in #4 above, is still
seen to follow any pre-quiescent-state activity.
6. When a given CPU invokes __rcu_process_gp_end(), it becomes
aware of the end of the old grace period and therefore makes
any RCU callbacks that were waiting on that grace period eligible
for invocation.
If this CPU is the same one that detected the end of the grace
period, and if there is but a single rcu_node in the hierarchy,
we will still be in the single critical section. In this case,
the memory barrier in step #4 guarantees that all callbacks will
be seen to execute after each CPU's quiescent state.
On the other hand, if this is a different CPU, it will acquire
the leaf rcu_node's ->lock, and will again be serialized after
each CPU's quiescent state for the old grace period.
On the strength of this proof, this commit therefore removes the memory
barriers from rcu_process_callbacks() and adds one to rcu_report_qs_rsp().
The effect is to reduce the number of memory barriers by one and to
reduce the frequency of execution from about once per scheduling tick
per CPU to once per grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The RCU CPU stall warnings can now be controlled using the
rcu_cpu_stall_suppress boot-time parameter or via the same parameter
from sysfs. There is therefore no longer any reason to have
kernel config parameters for this feature. This commit therefore
removes the RCU_CPU_STALL_DETECTOR and RCU_CPU_STALL_DETECTOR_RUNNABLE
kernel config parameters. The RCU_CPU_STALL_TIMEOUT parameter remains
to allow the timeout to be tuned and the RCU_CPU_STALL_VERBOSE parameter
remains to allow task-stall information to be suppressed if desired.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Ingo Molnar