Remove the code from the drivers that we are not going to implement before
submitting for review.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for Master Read-Modify-Write cycles on the ca91cx42.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ca91cx42 driver currently incorrectly handles master windows, setting
and retrieving the sizing parameters incorrectly. Also, in the slave window
handling, it uses an incorrectly set variable.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for the DMA controller in the ca91cx42 bridge.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_master_resource structure contains an item called "pci_resource".
Rename to make bus agnostic.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
At the moment the vme bridge drivers are written in a way that only
allows them to support one bridge at a time. Modify the drivers to
enable more than one bridge to be present per board.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check the directions in which the DMA controller is expected to operate
before giving control of a resource.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch corrects author email addresses and Copyright notices as a
result of the split up of the GE Fanuc joint venture.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rtl8187se needs to include semaphore.h to prevent build errors:
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Specify Kconfig dependencies, and include warnings for building as a module
udlfb is dependent on FB_DEFERRED_IO, FB_SYS_*, and FB_MODE_HELPERS
Because many kernels do not include defio (which cannot be built
as a module), yet users want to be able to build udlfb as a module later,
udlfb has ifdefs and these dependency warnings to help udlfb build with or
without certain dependencies, but also print warnings for any lost function.
Even though this kind of flexibility isn't common, we've gotten feedback
from a significant portion of users that they were frustrated without it.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for fbdev mmap clients who don't send damage ioctls
Because DisplayLink devices are out on the other end of usb, their
"framebuffer" is just normal system memory. So memory mapped writes
don't automatically trigger anything. So up to this point, standard
fbdev clients who rely on mmap() will get an unchanging screen.
This patch makes udlfb a client of Jaya Kumar's defio framework - which sets
up page fault triggers, and those faults are accumulated and sent to udlfb
on a defferred basis, to process as damage notifications for the framebuffer.
Because this involves more overhead than a notification directly from
the application (e.g. just passing on X DAMAGE extension notifications),
a sysfs attribute is provided by udlfb to control defio support.
/sys/class/graphics/fb*/use_defio - writing a "0" to this file before
calling mmap() causes defio to not be initialized - instead udlfb
will rely on getting damage notifications directly through the damage ioctl.
There are unsolved rendering problems with defio (horizontal dead regions
on framebuffer, that accumulate over time) which still needs a fix.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework rendering for improved performance
Approx 10-20% gain avg across several "benchmarks": x11perf, gtkperf, glxgears
Moves from a single pre-alloc'd urb protected by a long-held mutex
To a list of (4) pre-alloc'd urbs which can be dispatched asynchonously
Improved rendering algorithm to hardware with lower CPU consumption,
fewer system memory accesses, and slightly higher compression.
Better scalability to multiple processors, especially with
multiple framebuffers active.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework probe to use refcounts and std functions
Because the different parts of the driver (usb, fbdev) tear down
in different orders, the driver previously could crash accessing
data that had already been freed. Refcounting system used to handle.
Reworked probe to make use of refcounts, set mode using std fbops,
and set up sysfs and pre-allocated urbs.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add sysfs controls for edid and performance metrics
There are 8 new files exposed in /sys/class/graphics/fb*
edid - returns 128 byte edid blog, suitable for parsing with parse-edid
metrics_bytes_identical
metrics_bytes_rendered
metrics_bytes_sent
metrics_cpu_kcycles_used
metrics_misc
and metrics_reset, which resets all perf metrics to zero
The 6 perf metrics are of type atomic_t.
So these metrics return precise results for short benchmarks, but
any test approx a minute or longer runtime may roll over.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move to more consistent naming scheme
All udlfb functions start with udlfb_
All functions for udlfb's fbdev interface start with udlfb_ops_
All functinos for udlfb's usb interface start with udlfb_usb_
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add functions to pre-allocate and free usb bulk urbs for core render path.
Udlfb currently allocates a single urb, guarded by a mutex, that is a key
bottleneck. Because udlfb sends so much data, preallocation is most efficient.
Functions will be used by new rendering functions in later patches.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorganize the location of a few things to be closer to related code
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate checkpatch.pl warnings and errors so later patches in series are clean
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For the RTL8187SE, the variable priv->rf_chip is always RF_ZEBRA4
and priv->RegThreeWireMode is always HW_THREE_WIRE_SI. Remove these
2 variables.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleanups as suggested by checkpatch.pl utiltiy.
.o's from before and after cleanup have matching SHA1s.
Signed-off-by: Svenne Krap <svenne@krap.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to ni_atmio.c file to fix up bracing style problems
found by checkpatch.pl tool
Signed-off-by: Graham M Howe <gman.1352@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's clear from the indent levels and the context that there are supposed to
be curly braces here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current driver does not follow the state of the RF switch.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The TODO list includes switching this driver to use the common EEPROM
routines in EEPROM_93CX.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed parenthesis from return statements,
split up assignment and if condition
Signed-off-by: Jochen Maes <jochen.maes@sejo.be>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the rti800 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add suspend and resume functions (which are currently stubs
returning -ENOSYS)
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Provides a better explanation of what this
driver is for in the Kconfig file
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Renames the directory in which the driver files
are located; again for clarity.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patch renames rar_driver to rar_register to clarifiy and differentiate
from rar_handler that will be submitted later
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It turns out that Mimio has a userspace solution for this product using
libusb, and the in-kernel driver is just getting in the way now and
causing problems. So they have asked that the in-kernel driver be
removed. As the staging driver wasn't quite working anyway, and Mimio
supports their libusb solution for all distros, I am removing the
in-kernel driver.
The libusb solution can be downloaded from:
http://www.mimio.com/downloads/mimio_studio_software/linux.asp
Cc: <mwilder@cs.nmsu.edu>
Cc: Phil Hannent <phil@hannent.co.uk>
Cc: Marc Rousseau <Marc.Rousseau@mimio.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes up the sparse and coding style issues found in the
dt3155_io.c file.
No code is changed, only formatting and removing unused code.
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes almost all checkpatch issues in the ni_pcidio comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the rti802 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arthur Benilov