Add call back to door bell for qpair. This help reduce access to
qla_hw_data structure, in order to reduce cach thrash.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For ISP27XX, use shadow register to read FW provided REQQ's consumer
index. The shadow register is dma'ed by firmware.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Move chip_reset, enable_class_2 fields from qla_hw_data to qla_qpair
to reduce cache thrash for target MQ.
- Optimizations to reduce unnecessary memory load for good path io.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add fw_started flag to qpair to reduce cache thrash. This reduce access
to qla_hw_data structure by each qpair.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For Target mode, user can control the work load by placing qla2xxx's irq
vector on certain CPU via the smp_affinity knob. This patch allows user
to control the number of QPair's irq to be active. The irqs are
allocated at driver load time until unload. The work itself is placed on
the QPair based on user setting.
Usage:
modprobe qla2xxx qlini_mode=disabled ql2xuctrlirq=1
mount -t debugfs none /sys/kernel/debug
echo 2 > /sys/kernel/debug/qla2xxx/qla2xxx_[host num]/naqp
echo [cpu id] > /proc/irq/[irq id]/smp_affinity_list
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In target mode driver, queue pairs are not created during driver load
time, instead they are created at the configuration time after chip
reset. If a user tries to load/unload driver after queue pairs are
created, then there would be mailbox failure, while deleting queue
pairs. Flag is added to check if queue pairs are created or not. Queue
pairs will be deleted only If they were created during target
configuration.
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable Multi Queue for Target mode. At Initiator LUN scan time, each LUN
is assign to a QPair. Each QPair is affinitize to certain CPU. When new
cmd arrives from the wire, the lunid is used to search for qpair. The
qpair's affinitized cpuid will be used to queue up the work element.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In Current code, Req Q 0, RespQ 0 & hardware_lock are the main resources
for sending and process completion of Target IO. These resources are now
referenced behind a new qpair/"struct qla_qpair base_qpair". Main path
IO handle will access those resources via the qpair pointer in
preparation for Target MQ.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge active/outstanding cmd arrays from target side and initiator side
together in prepration for Target Multi Queue support.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the SCSI command presented to the device reset handler is used
to send TMFs to the AFU for a device reset. This behavior is incorrect as
the command presented is an actual command and not a special notification.
As such, it should only be used for reference and not be acted upon.
Additionally, the existing TMF transmission routine does not account for
actual errors from the hardware, only reflecting failure when a timeout
occurs. This can lead to a condition where the device reset handler is
presented with a false 'success'.
Update send_tmf() to dynamically allocate a private command for sending
the TMF command and properly reflect failure when the completed command
indicates an error or was aborted. Detect TMF commands during response
processing and avoid scsi_done() for these types of commands. Lastly,
update comments in the TMF processing paths to describe the new behavior.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI core now zeroes the per-command private data area prior to
calling into the LLD. Replace the clearing operation that takes place
when the private command data reference is obtained with a routine that
performs common initializations. The zeroing that takes place in the
device reset path remains intact as the private command data associated
with the specified SCSI command is not guaranteed to be cleared.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash driver supports performing a write-same16 to scrub virtual
luns when they are released by a user. To date, AFUs for adapters that
are supported by cxlflash do not have the capability to unmap as part of
the WS operation. This can lead to fragmented flash devices which results
in performance degradation.
Future AFUs can optionally support unmap write-same commands and reflects
this support via the context control register. This provides userspace
applications with direct visibility such that they need not depend on a
host API.
Detect unmap support during cxlflash initialization by reading the context
control register associated with the primary hardware queue. Update the
existing write_same16() routine to set the unmap bit in the CDB when unmap
is supported by the host.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adopt the SISLite AFU debug capability to allow future CXL Flash
adapters the ability to better debug AFU issues. Update the SISLite
header with the changes necessary to support AFU debug operations
and create a host ioctl interface for user debug software. Also
update the cxlflash documentation to describe this new host ioctl.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adopt the SISLite AFU LUN provisioning capability to allow future CXL
Flash adapters the ability to better manage storage. Update the SISLite
header with the changes necessary to support LUN provision operations
and create a host ioctl interface for user LUN management software. Also
update the cxlflash documentation to describe this new host ioctl.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The existing AFU capability checking infrastructure is closely tied to
the command mode capability bits. In order to support new capabilities,
refactor the existing infrastructure to be more generic.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As staging for supporting various host management functions, add a host
ioctl infrastructure to filter ioctl commands and perform operations that
are common for all host ioctls. Also update the cxlflash documentation to
create a new section for documenting host ioctls.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To date the only supported internal AFU command is AFU sync. The logic
to send an internal AFU command is embedded in the specific AFU sync
handler and would need to be duplicated for new internal AFU commands.
In order to support new internal AFU commands, separate code that is
common for AFU internal commands into a generic transmission routine
and support passing back command status through an IOASA structure.
The first user of this new routine is the existing AFU sync command.
As a cleanup, use a descriptive name for the AFU sync command instead
of a magic number.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash driver currently lacks host management interface. Future
devices supported by cxlflash will provide a variety of host-wide
management functions. Examples include LUN provisioning, hardware debug
support, and firmware download.
In order to provide a way to manage the device, a character device will
be created during probe of each adapter. This device will support a set of
ioctls defined in the SISLite specification from which administrators can
manage the adapter.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To date, CXL flash devices do not support a single command abort operation.
Instead, the SISLite specification provides a context reset operation to
cleanup all pending commands for a given context.
When a context reset is successful, it is guaranteed that the AFU has
aborted all currently pending I/O. This sequence is less invasive than a
device or host reset and can be executed to support scsi command abort
requests. Add eh_abort_handler callback support to process command timeouts
and abort requests.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the AFU is reset in an error path, pending scsi commands can be
silently dropped without completion or a formal abort. This puts the onus
on the cxlflash driver to notify mid-layer and indicating that the command
can be retried.
Once the card has been quiesced, the hardware send queue lock is acquired
to prevent any data movement while the pending commands are processed.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, there is no book keeping of the pending scsi commands in the
cxlflash driver. This lack of tracking in-flight requests is too
restrictive and requires a heavy-hammer reset each time an adapter error is
encountered. Additionally, it does not allow for commands to be properly
retried.
In order to avoid this problem and to better handle error path command
cleanup, introduce a linked list for each hardware queue that tracks
pending commands.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
AFU sync operations are not currently evaluated for failure. This is
acceptable for paths where there is not a dependency on the AFU being
consistent with the host. Examples include link reset events and LUN
cleanup operations. On paths where there is a dependency, such as a LUN
open, a sync failure should be acted upon.
In the event of AFU sync failures, either log or cleanup as appropriate for
operations that are dependent on a successful sync completion.
Update documentation to reflect behavior in the event of an AFU sync
failure.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A context reset failure indicates the AFU is in a bad state. At present,
when such a situation occurs, no further action is taken. This leaves the
adapter in an unusable state with no recoverable actions.
To avoid this situation, context reset failures will be escalated to a host
reset operation. This will be done asynchronously to allow the acting
thread to return to the user with a failure.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per the SISLite specification, context_reset() writes 0x1 to the LSB of the
reset register. When the AFU processes this reset request, it is expected
to clear the bit after reset is complete. The current implementation simply
checks that the entire value read back is not 1, instead of masking off the
LSB and evaluating it for a change to 0. Should the AFU manipulate other
bits during the reset (reading back a value of 0xF for example), successful
completion will be prematurely indicated given the existing logic.
Additionally, in the event that the context reset operation fails, there
does not currently exist a way to provide feedback to the initiator of the
reset. This poses a problem for the rare case that a context reset fails as
the caller will proceed on the assumption that all is well.
To remedy these issues, refactor the context reset routine to only mask off
the LSB when evaluating for success and return status to the caller. Also
update the context reset handler parameters to pass a hardware queue
reference instead of a single command to better reflect that the entire
queue associated with the context is impacted by the reset.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cxlflash_afu_sync() routine returns a negative one to indicate any kind
of failure. This makes it impossible to establish why the error occurred.
Update the return codes to clearly indicate the failure cause to the
caller.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently there are separate spin locks for the two supported I/O queueing
models. This makes it difficult to serialize with paths outside the enqueue
path.
As a design simplification and to support serialization with enqueue
operations, move to only a single lock that is used for enqueueing
regardless of the queueing model.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent
wrapper.
[mkp: fixed driver name]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent
wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable idx is defined as u16 thus statement (idx < 0) is always false
and should be removed.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trivial fix to spelling mistake in dev_info message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Element phy_type is a bitmask and it only ever has 2 bits possibly set,
and it is overkill to define as a u64, so redefine as a u32.
This change resolves static code check complaint that "phy->phy_type &=
~PORT_TYPE_SAS;" would unintentionally clear the high 32 bits as well.
Structure hisi_sas_phy is also reordered to ensure packing efficiency.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The symbolic name VLC_SA_RECEIVE_CREDENTIAL is not used anywhere in the
kernel. Additionally, since SPC 5 the RECEIVE CREDENTIAL command is
obsolete. The VLC_SA_RECEIVE_CREDENTIAL definition is misleading since
it occurs outside the list of other variable length CDB service action
codes (READ_32, WRITE_32, ...). Hence remove this definition.
References: commit e9ccc998b7 ("[SCSI] Add missing SPC-4 CDB and
MAINTENANCE_[IN,OUT] service action definitions")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Both aac_send_raw_srb() and aac_get_hba_info() may copy stack allocated
structs to userspace without initializing all members of these
structs. Clear out this memory to prevent information leaks.
Fixes: 423400e64d ("scsi: aacraid: Include HBA direct interface")
Fixes: c799d519bf ("scsi: aacraid: Retrieve HBA host information ioctl")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If bnx2i_map_ep_dbell_regs() then we accidentally return NULL instead of
an error pointer. It results in a NULL dereference in
iscsi_if_ep_connect().
Fixes: cf4e636385 ("[SCSI] bnx2i: Add bnx2i iSCSI driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function hptiop_iop_request_callback_itl does not need to be in
global scope, so make it static.
Cleans up sparse warning:
"symbol 'hptiop_iop_request_callback_itl' was not declared. Should it
be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Assign rxq to TCP connections in round robin mode to use all available
rxqs.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A change in remote port removal introduced a spurious put which can
cause a premature structure teardown. The affects were most notable when
the driver attempted to unload as a null pointer would be hit.
Fix by removing the unnecessary put.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On link down, transport is calling driver to abort outstanding ios.
Driver erroneously rejects the abort if the port indicates it isn't
logged in - which will be the case after the link down. Thus, the io
can't clean up. This prevents reconnection at the transport level.
Fix by allowing abort to proceed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
virtio_scsi tries to do exception handling after the default 30 seconds
timeout expires. However, it's better to let the host control the
timeout, otherwise with a heavy I/O load it is likely that an abort will
also timeout. This leads to fatal errors like filesystems going
offline.
Disable the 'sd' timeout and allow the host to do exception handling,
following the precedent of the storvsc driver.
Hannes has a proposal to introduce timeouts in virtio, but this provides
an immediate solution for stable kernels too.
[mkp: fixed typo]
Reported-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There's no need to use the static UTS_RELEASE string, since
utsname()->release contains the same.
This avoids rebuilding this file for every change of the release string.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After commit 556e26a70b ("scsi: remove tsk_mgmt_response and
it_nexus_response transport methods"), the target driver support was
removed totally. Drop the residual.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add -ko to the module version similar to module version of other Chelsio
drivers.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid unnecessary snprintf() when formatting variables for display in
sysfs and switch to sysfs_match_string() for validating user input.
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since 9c58b395 ("scsi: scsi_devinfo: remove synchronous ALUA for NETAPP
devices") this code is unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC disks issue I/O directly to the host storage port driver, this is
diffirent to VHD disks where I/O is virtualized and timeout is handled
by the host VSP (Virtualization Service Provider).
FC disks are usually setup in a multipath system, and they don't want to
reset timer on I/O timeout. Timeout is detected by multipath as a good
time to failover and recover.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The fields sense_data_size and sense_data are unitialized garbage from
the stack and are being copied back to userspace. Fix this leak of
stack information by ensuring they are zero'd.
Detected by CoverityScan, CID#1435473 ("Uninitialized scalar variable")
Fixes: 423400e64d ("scsi: aacraid: Include HBA direct interface")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set lpfc driver revision to 11.4.0.1
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Beacon OFF from switch is rejected by driver.
Driver fails Beacon OFF if frequency is set to 0. As per fc-ls spec,
status, capability, frequency and duration fields are only applicable
for Beacon ON.
Remove frequency and type checks. Reject Beacon ON if duration is non
zero.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
