This is just for the low hanging fruit 'cmd' arg, a proper beautifier
will as well use arg->mask to ignore the third arg for some of the
cmds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-phhvcyi9vdnxw9l11tbquvru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can have generic formatters that act upon specific
parameters.
Start using them with a simple string table that assumes entries
will be indexes to a string table, like with the 'which' parm
for the set and getitimer syscalls
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r0dqhapr8j6150v1wctgg340@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can add more state to formatters without having to modify
all of them.
Example is to pass a table to a generic string formatter, like for
setitimer 'which' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zyi2esmas5wfrxznh0x0fkiz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove DUMMY by making sure 'feature_print' is evaluated and thus
all messages are printed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20131008155110.GA15558@krava.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Ahern reported that when passing in LDFLAGS=-static then
the feature checks still succeed - causing build failures down
the line because the static libraries are missing.
Solve this by passing through LDFLAGS to the feature-check
Makefile.
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20131007155129.GA1066@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The various testcases used different styles, which was not really
visible as long as they hid in feature-tests.mak. Now that they
are out in the open make them prettier.
( Also delete the leftover, empty feature-tests.mak file. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-drDWk8xltndjdsespzjbhu6w@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If someone specifies a single target, mixed with O=, the following way:
hubble:~/tip/tools/perf> make O=/tmp/perf util/stat.o
BUILD: Doing 'make -j8' parallel build
gcc -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k [...]
The build might even fail, if a target depends on other targets:
hubble:~/tip/tools/perf> make O=/tmp/perf perf.o
...
perf.c: In function ‘handle_options’:
perf.c:155:21: error: ‘PERF_HTML_PATH’ undeclared (first use in this function)
The correct way to invoke such targets is:
hubble:~/tip/tools/perf> make O=/tmp/perf /tmp/perf/perf.o
BUILD: Doing 'make -j8' parallel build
GEN /tmp/perf/common-cmds.h
CC /tmp/perf/perf.o
But that's unnecessary typing and it's also easy to mistakenly build into the
source directory.
To fix this remove the generic suffix rules and add redirection to $(OUTPUT)
for the most popular .o targets.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mk0oiukmhgSbrll6chrPkkqr@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was a long-standing bug, relative pathnames like O=dir did not fully
work in the build system:
$ make O=localdir clean
SUBDIR Documentation
../../scripts/Makefile.include:3: *** O=localdir does not exist. Stop.
make[1]: *** [clean] Error 2
make: *** [clean] Error 2
Fix this by canonizing the directory before passing it to Makefile.perf.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-hchMp1hozn9tqgswWcooxcru@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case the user specifies MAKEFLAGS as an environment variable,
or uses 'make -jN' explicitly, the options can conflict and result in:
BUILD: Doing 'make -j8' parallel build
make[1]: warning: -jN forced in submake: disabling jobserver mode.
GEN common-cmds.h
make[1]: *** write jobserver: Bad file descriptor. Stop.
Make sure we invoke the main makefile in a pristine state.
Users who want to do something non-standard can use the:
make -f Makefile.perf
method to invoke the makefile.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-uen6hzTvkqqngqwjma9yoEgw@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo noticed that the feature-check binaries are generated in the
config/check-features/ directory even if O= is specified.
Implement $(OUTPUT) logic for config/check-features/Makefile.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-NLwlnv5prsubuey0vfocebym@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri reported that 'make .o' stopped working:
> [jolsa@krava perf]$ make -f Makefile perf.o
> cc -c -o perf.o perf.c
> In file included from builtin.h:4:0,
> from perf.c:9:
> util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
> compilation terminated.
> make: *** [perf.o] Error 1
This is due to GNU make having built-in rules for popular targets such
as *.o. Clear them out so that all targets as passed through to Makefile.perf.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-5wkuvmlaaxtfgepKcvRij8sh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simplify test-all.c by including it all the testcases via #include.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pcZlwqq5ou7Ebvkekvhtzfbm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to include them into test-all.c directly, by making sure
that they build cleanly and without warnings.
Also make sure they make a certain amount of sense and don't crash
when executed.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Mn9gsdutzopoowk3xurqpsxE@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Also remove try-cc et al. These got obsoleted by the split-out feature checks in
config/feature-checks/.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Y6ailbiranadqlrl8Dfivjbi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Note that these are rarely executed tests, so we call feature_check() explicitly
and don't have them in CORE_FEATURE_CHECKS.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pvumlx6mbtfxffgrlwO2mRcx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To make it more apparent that there is not change in functionality we introduced
Makefile.parallel separately and now flip it with the main Makefile, which
moves into Makefile.perf.
The renames are:
Makefile.parallel => Makefile
Makefile => Makefile.perf
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-igRfuw9ugbnnpixLd6wpptzl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement automatic parallel builds when building in tools/perf:
$ time make
# [ perf build: Doing 'make -j12' parallel build. ]
Auto-detecting system features:
...
real 0m9.265s
user 0m59.888s
sys 0m6.082s
On GNU make achieving this is not particularly easy, it requires a separate
makefile, which then invokes the main Makefile.
( Note: this patch adds Makefile.parallel to show the concept - the two
makefiles will be flipped in the next patch to avoid having to specify -f
to get parallelism in the default build. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-dvBjwqiTyzrufzkz8oanhpf9@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change the print-out of auto-detected features by making sure that
repeat invocations of 'make' when all features are successfully
detected do not produce the (rather lengthy) autodetection printout.
( When one or more features are missing then we still print out the
feature detection table, to make sure people are aware of the
resulting limitations. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-qd8sMsshcjomxqx9bQcufmaa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The detection of certain rarely detected features can be delayed
to when they are actually needed.
So speed up the common case of auto-detection by pre-building only
a core set of features and populating only their feature-flags.
[ Features not listed in CORE_FEATURES need to built explicitly
via the feature_check() function. ]
(Also order the feature names alphabetically, while at it.)
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-xQkuveknd0gqla1dfxrqKpkl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
config/Makefile is not included for the 'clean' target, so invoke the
config/feature-checks/Makefile 'clean' target from Makefile.perf.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-sh2cGvmsjbrazarlqre7pVwt@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus reported the following perf build system bug:
'Another annoyance during that make was that "make install" seems to
want to re-make the thing I just built. That's absolutely horrible, [...]'
The thing that got re-built were 'only' the (numerous) feature checks,
not the whole project - but still it was mighty annoying as the feature
checks took 9+ seconds even on reasonably fast boxes.
Even with the autodep patches where feature detection is much faster
it wastes resources, wastes screen real estate and confuses users if
we execute feature detection twice.
There were two sources for these unnecessary re-builds of the feature
checks:
- Unnecessary nested invocations of $(MAKE), apparently to be able
to do conditional compilation dependent on documentation tools
presence. Use straight dependencies instead, with no nesting.
- A direct invocation of $(MAKE) to rebuild the PERF-VERSION-FILE.
This is apparently done to be able to include it into the
Makefile:
-include $(OUTPUT)PERF-VERSION-FILE
but that's entirely pointless for two reasons: 1) the version file
gets regenerated by the initial build pass anyway, 2) including it
is futile, given its contents:
#define PERF_VERSION "3.12.rc3.g8510c7"
'make' will interpret that as a comment line...
So just remove this part of the doc-generation logic.
With these things fixed a 'make install' now rebuilds only what is needed.
A repeated 'make install' on an already built tree is super fast now,
it finishes in under 0.3 seconds:
#
# After the patch:
#
$ time make install
...
real 0m0.280s
user 0m0.162s
sys 0m0.054s
Prior all the autodep changes and prior this fix, a repeat 'make install'
took 24.1 seconds (!) on the same system:
#
# Before the patches:
#
$ time make install
...
real 0m24.109s
user 0m21.171s
sys 0m2.449s
Which almost entirely was caused by fixable build system fat.
We are now literally ~86 times faster.
A fresh rebuild and install now takes just 11.4 seconds:
#
# After the patch:
#
$ make clean
$ time make -j16 install
...
real 0m11.457s
user 1m43.411s
sys 0m7.610s
Without the patches it took 27.8 seconds:
#
# Before the patches:
#
$ make clean
$ time make -j16 install
...
real 0m27.801s
user 1m59.242s
sys 0m9.749s
So even in the complete rebuild case we are now ~2.5 times faster.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-x4qjnxjGrgxpribq8sdakfTp@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
libtraceevent.a and liblk.a rules have always-missed dependencies,
which causes python.so to be relinked at every build attempt - even
if none of the affected code changes.
This slows down re-builds unnecessarily, by adding more than a second
to the build time:
comet:~/tip/tools/perf> time make
...
SUBDIR /fast/mingo/tip/tools/lib/lk/
make[1]: `liblk.a' is up to date.
SUBDIR /fast/mingo/tip/tools/lib/traceevent/
LINK perf
GEN python/perf.so
real 0m1.701s
user 0m1.338s
sys 0m0.301s
Add the (trivial) dependencies to not force a re-link.
This speeds up an empty re-build enormously:
comet:~/tip/tools/perf> time make
...
real 0m0.207s
user 0m0.134s
sys 0m0.028s
[ This adds some coupling between the build dependencies of
libtraceevent and liblk - but until those stay relatively
simple this should not be an issue. ]
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
util/PERF-VERSION-GEN is currently executed on every build attempt,
and this script can take a lot of time on trees that are at a
significant git-distance from Linus's tree:
$ time util/PERF-VERSION-GEN
real 0m4.343s
user 0m4.176s
sys 0m0.140s
It also takes a lot of time if the Git repository is network attached, etc.,
because the commands it uses:
TAG=$(git describe --abbrev=0 --match "v[0-9].[0-9]*" 2>/dev/null )
has to count commits from the nearest tag and thus has to access (and
decompress) every git commit blob on the relevant version path.
Even on Linus's tree it takes 0.28 seconds on a fast box to count all the
commits and get the git version string:
$ time util/PERF-VERSION-GEN
real 0m0.279s
user 0m0.247s
sys 0m0.025s
But the version string only has to be regenerated if the git repository's
head commit changes. So add a dependency of ../../.git/HEAD and touch
the file every time it's regenerated, so that Make's build rules can
pick it up and cache the result:
make: `PERF-VERSION-FILE' is up to date.
real 0m0.184s
user 0m0.117s
sys 0m0.026s
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Concatenate all feature checks into test-all.c.
This can be built and checked faster than all the individual tests.
If test-all fails then we still check all the individual features, so
this is a pure speedup, it should have no effects on functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-5hlcb2qorzwfwrWTjiygjjih@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The strlcpy() feature check slows every build unnecessarily - so make it
a __weak function so it does not have to be auto-detected.
If the libc (or any other library) has an strlcpy() implementation it will
be used - otherwise our fallback is active.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-zjbrcupapu08ePsyYhhhxiwk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the standard CPP style we use in the kernel:
#ifndef foo
# define foo bar
#endif
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-iqyVrrHqpn0eiwenvgwrh8lf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-jjlmizjmhockUs04wqnScnkl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wwktuHl4Ra5lyrrretkxmxqf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-dDgivr9xtjrof2vmoyOfwxkj@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo