Adding picture aspect ratio for CEA modes based on CEA-861D Table 3 or
CEA-861E Table 4. This is useful for filling up the detail in AVI
infoframe.
v2: Ville's review comments incorporated
Added picture aspect ratio as part of edid_cea_modes instead of DRM_MODE
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Parse 2D_VIC_order_X and 3D_Structure_X from the list at the end of the
HDMI Vendor Specific Data Block.
v2: Use an offset value depending on 3D_Multi_present and add
detail_present. (Ville Syrjälä)
v3: Make sure the list is parsed even if 3D_Structure_ALL/MASK is not
present. (Ville Syrjälä)
Fix one length check and remove another. (Ville Syrjälä)
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To make it clear what exactly mode_valid() should return.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
(but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over
Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.
* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
drm/i915/bdw: make sure south port interrupts are enabled properly v2
drm/i915: Include more information in disabled hotplug interrupt warning
drm/i915: Only complain about a rogue hotplug IRQ after disabling
drm/i915: Only WARN about a stuck hotplug irq ONCE
drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
Pull request of 2014-01-17
Pull request for 3.14. One not so urgent fix, One huge device update.
The pull request corresponds to the patches sent out on dri-devel, except:
[PATCH 02/33], review tag typo pointed out by Matt Turner.
[PATCH 04/33], dropped. The new surface formats are never used.
The upcoming vmware svga2 hardware version 11 will introduce the concept
of "guest backed objects" or -resources. The device will in principle
get all
of its memory from the guest, which has big advantages from the device
point of view.
This means that vmwgfx contexts, shaders and surfaces need to be backed
by guest memory in the form of buffer objects called MOBs, presumably
short for MemoryOBjects, which are bound to the device in a special way.
This patch series introduces guest backed object support. Some new IOCTLs
are added to allocate these new guest backed object, and to optionally
provide
them with a backing MOB.
There is an update to the gallium driver that comes with this update, and
it will be pushed in the near timeframe presumably to a separate mesa branch
before merged to master.
* tag 'vmwgfx-next-2014-01-17' of git://people.freedesktop.org/~thomash/linux: (33 commits)
drm/vmwgfx: Invalidate surface on non-readback unbind
drm/vmwgfx: Silence the device command verifier
drm/vmwgfx: Implement 64-bit Otable- and MOB binding v2
drm/vmwgfx: Fix surface framebuffer check for guest-backed surfaces
drm/vmwgfx: Update otable definitions
drm/vmwgfx: Use the linux DMA api also for MOBs
drm/vmwgfx: Ditch the vmw_dummy_query_bo_prepare function
drm/vmwgfx: Persistent tracking of context bindings
drm/vmwgfx: Track context bindings and scrub them upon exiting execbuf
drm/vmwgfx: Block the BIND_SHADERCONSTS command
drm/vmwgfx: Add a parameter to get max MOB memory size
drm/vmwgfx: Implement a buffer object synccpu ioctl.
drm/vmwgfx: Make sure that the multisampling is off
drm/vmwgfx: Extend the command verifier to handle guest-backed on / off
drm/vmwgfx: Fix up the vmwgfx_drv.h header for new files
drm/vmwgfx: Enable 3D for new hardware version
drm/vmwgfx: Add new unused (by user-space) commands to the verifier
drm/vmwgfx: Validate guest-backed shader const commands
drm/vmwgfx: Add guest-backed shaders
drm/vmwgfx: Hook up guest-backed surfaces
...
Fixes error messages in vmware.log
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The device and kernel module disagrees about the command length of
some commands. More pack attributes might be needed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Adds the relevant commands to the device interface header and
implements 64-bit binding for 64 bit VMs.
v2: Uppercase command IDs, Correctly use also 64 bit page tables.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
With guest-backed surfaces, surface->sizes == NULL, causing a kernel oops.
Use the base_size member instead.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Combine it with vmw_dummy_query_bo_create, and also make sure
we use tryreserve when reserving the bo to avoid any lockdep warnings
We are sure the tryreserve will always succeed since we are
the only users at that point.
In addition, allow the vmw_bo_pin function to pin/unpin system memory.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Only scrub context bindings when a bound resource is destroyed, or when
the MOB backing the context is unbound.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
The device is no longer capable of scrubbing context bindings of resources
that are bound when destroyed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
This ioctl enables inter-process synchronization of buffer objects,
which is needed for mesa Guest-Backed objects.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
By default SVGA device creates nonmaskable multisampling surfaces, in
which case multisampleCount of 1 means: the first quality setting
of nonmaskable multisampling surface. Lets change it to make sure
that the backends know that multisampling is really off.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Make sure we disallow commands if the device doesn't support them.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Contexts are managed by the kernel only, so disable access to GB
context commands from user-space
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Ruzin <zackr@vmware.com>
When the backing store buffer is evicted, Issue a readback from the
resources and notify the resources that they are no longer bound to
a valid backing store.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Perform a translation of legacy query commands should they occur
in the command stream.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Also do basic consistency checking.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
To bind a buffer object as a MOB, just validate it as a MOB
memory type. We are reusing the GMRID manager, although we create a new
instance of it to manage MOB ids and tomake sure we don't exceed
the maximum amount of MOB pages.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Implement MOB setup, binding and unbinding, but don't hook up to
TTM yet.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Conflicts:
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
In the future, Scanout buffers need not be backed by VRAM and
the two definitions will differ.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Not hooked up yet. This is only the definition.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Conflicts:
include/uapi/drm/vmwgfx_drm.h
With dma compliance / IOMMU support added to the driver in kernel 3.13,
the dma addresses can exceed 44 bits, which is what we support in
32-bit mode and with GMR1.
So in 32-bit mode and optionally in 64-bit mode, restrict the dma
addresses to 44 bits, and strip the old GMR1 code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Conflicts are getting out of hand, and now we have to shuffle even
more in -next which was also shuffled in -fixes (the call for
drm_mode_config_reset needs to move yet again).
So do a proper backmerge. I wanted to wait with this for the 3.13
relaese, but alas let's just do this now.
Conflicts:
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_pm.c
Besides the conflict around the forcewake get/put (where we chaged the
called function in -fixes and added a new parameter in -next) code all
the current conflicts are of the adjacent lines changed type.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In some cases we enter the cursor code with file_priv = NULL causing an oops,
we also can try to unpin something that isn't pinned, and this is a good fix for it.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull drm fixes from Dave Airlie:
"One nouveau regression fix on older cards, i915 black screen fixes,
and a revert for a strange G33 intel problem"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix null ptr dereferences on some boards
Revert "drm: copy mode type in drm_mode_connector_list_update()"
drm/i915/bdw: make sure south port interrupts are enabled properly v2
drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init()
drm/i915: fix DDI PLLs HW state readout code
Single regression fix for nouveau
* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: fix null ptr dereferences on some boards
Regression from "device: populate master subdev pointer only when fully
constructed"
Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fix build error: qxl uses crc32 functions so it needs to select
CRC32.
Also use angle quotes around a kernel header file name.
drivers/built-in.o: In function `qxl_display_read_client_monitors_config':
(.text+0x19d754): undefined reference to `crc32_le'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include appropriate header file drm/r128/r128_drv.h in
drm/r128/r128_ioc32.c because function r128_compat_ioctl() has its
prototype declaration in the header file.
This eliminates the following warning in drm/r128/r128_ioc32.c:
drivers/gpu/drm/r128/r128_ioc32.c:196:6: warning: no previous prototype for ‘r128_compat_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function as static because it is not used outside the file
drm/via/via_drv.c.
This eliminates the following warning in drm/via/via_drv.c:
drivers/gpu/drm/via/via_drv.c:49:6: warning: no previous prototype for ‘via_driver_postclose’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function as static because it is not used outside the file
drm/sis/sis_drv.c.
This eliminates the following warning in drm/sis/sis_drv.c:
drivers/gpu/drm/sis/sis_drv.c:97:6: warning: no previous prototype for ‘sis_driver_postclose’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function qxl_device_init() as static in drm/qxl/qxl_kms.c because
it is not used outside this file.
This eliminates the following warning in drm/qxl/qxl_kms.c:
drivers/gpu/drm/qxl/qxl_kms.c:118:5: warning: no previous prototype for ‘qxl_device_init’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include appropriate header file drivers/gpu/drm/mga/mga_drv.h in
drm/mga/mga_ioc32.c because function mga_compat_ioctl() has its
prototype declaration in the header file.
This eliminates the following warning in drm/mga/mga_ioc32.c:
drivers/gpu/drm/mga/mga_ioc32.c:207:6: warning: no previous prototype for ‘mga_compat_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vandana Kannan