[ Upstream commit e65bb38824 ]
Except SDHCI_QUIRK_BROKEN_CARD_DETECTION and MMC_CAP_NONREMOVABLE,
we also do not need to handle controller native card detect interrupt
for gpio cd type.
If we wrong enabled the card detect interrupt for gpio case, it will
cause a lot of unexpected card detect interrupts during data transfer
which should not happen.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1582100563-20555-2-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d157c28d2 ]
This patch updates the documentation with the information related
to the quirks that needs to be added for disabling all SuperSpeed XHCI
instances in park mode.
Cc: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55f7326170 ]
Create a quirk that allows special processing and/or
skipping the call to snd_card_register.
For HyperX AMP, which uses two interfaces, but only has
a capture stream in the second, this allows the capture
stream to merge with the first PCM.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20200314165449.4086-3-crwulff@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd5ddc125 ]
The touchscreen on the Cube I15-TC don't match the default display,
with 0,0 touches being reported when touching at the top-right of
the screen.
Add a quirk to invert the x coordinate.
Reported-and-tested-by: Arkadiy <arkan49@yandex.ru>
Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2edb84e304 ]
MicroBook IIc operates in UAC2 mode by default. This patch addresses
several issues with it:
- MicroBook II and IIc shares the same USB ID. We can distinguish them
by interface class.
- MaxPacketsOnly attribute is erroneously set in endpoint descriptors.
As a result this card produces noise with all sample rates other than
96 KHz. This also causes issues like IOMMU page faults and other
problems with host controller.
- Sample rate changes takes more than 2 seconds for this device. Clock
validity request returns false during that period, so the clock validity
quirk is required.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200229151815.14199-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25bfaaa73c ]
In order to probe EDMA with ti-sysc interconnect target module and with
device tree data, we need to properly detect EDMA and set the flags for
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY for tptc.
We have these flags currently set for am4 and dra7, but not for am335x.
Let's set them for all the SoCs as the tptc module should behave the
same for all of them. It's likely that am335x was never tested to idle
EDMA tptc.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77dfece2e6 ]
In order to prepare probing display subsystem (DSS) with ti-sysc
interconnect target module driver and device tree data, let's
detect DSS related modules.
We need to also add reset quirk handling for DSS, but until that's
done, let's just enable the optional clock quirks for DSS and
omap4 HDMI. The rest is just naming of modules if CONFIG_DEBUG
is set.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8639e1c98 ]
The RTC modules on am3 and am4 need quirk handling to unlock and lock
them for reset so let's add the quirk handling based on what we already
have for legacy platform data. In later patches we will simply drop the
RTC related platform data and the old quirk handling.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590e15c76f ]
We are currently setting -1 for non-existing sysconfig related registers
for quirks, but setting -ENODEV elsewhere. And for matching the quirks,
we're now just ignoring the non-existing registers. This will cause issues
with misdetecting DSS registers as the hardware revision numbers can have
duplicates.
To avoid this, let's standardize on using -ENODEV also for the quirks
instead of -1. That way we can always just test for a match without adding
any more complicated logic.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64c021fd9 ]
The clk_disable_quirk and clk_enable_quirk should really be called
pre_reset_quirk and post_reset_quirk to avoid confusion like we had
with hdq1w reset.
Let's also rename the related functions so the code is easier to follow.
Note that we also have reset_done_quirk that is needed in some cases
after checking the separate register for reset done bit.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 679b2ec8e0 ]
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd0ecabdc9 ]
Timing controllers on A20 are not equivalent: tcon0 on A20 supports
LVDS output and tcon1 does not. Separate the capabilities by
introducing independent set of quirks for each of the tcons.
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219180858.4806-3-andrey.lebedev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3045696d0c ]
The ITE 8595 chip used in various 2-in-1 keyboard docks works fine with
the hid-generic driver (minus the RF_KILL key) and also keeps working fine
when swapping drivers, so there is no need to have it in the
hid_have_special_driver list.
Note the other 2 USB ids in hid-ite.c were never added to
hid_have_special_driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2253ed4b36 ]
For the ux500v2 variant of the PL18x block, any block sizes
are supported. This is necessary to support some SDIO
transfers. This also affects the QCOM MMCI variant and the
ST micro variant.
For Ux500 an additional quirk only allowing DMA on blocks
that are a power of two is needed. This might be a bug in
the DMA engine (DMA40) or the MMCI or in the interconnect,
but the most likely is the MMCI, as transfers of these
sizes work fine for other devices using the same DMA
engine. DMA works fine also with SDIO as long as the
blocksize is a power of 2.
This patch has proven necessary for enabling SDIO for WLAN on
PostmarketOS-based Ux500 platforms.
What we managed to test in practice is Broadcom WiFi over
SDIO on the Ux500 based Samsung GT-I8190 and GT-S7710.
This WiFi chip, BCM4334 works fine after the patch.
Before this patch:
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4334-sdio
for chip BCM4334/3
mmci-pl18x 80118000.sdi1_per2: unsupported block size (60 bytes)
brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
brcmfmac: brcmf_sdio_download_code_file: error -22 on writing
434236 membytes at 0x00000000
brcmfmac: brcmf_sdio_download_firmware: dongle image file download
failed
After this patch:
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4334/3 wl0:
Nov 21 2012 00:21:28 version 6.10.58.813 (B2) FWID 01-0
Bringing up networks, discovering networks with "iw dev wlan0 scan"
and connecting works fine from this point.
This patch is inspired by Ulf Hansson's patch
http://www.spinics.net/lists/linux-mmc/msg12160.html
As the DMA engines on these platforms may now get block sizes
they were not used to before, make sure to also respect if
the DMA engine says "no" to a transfer.
Make a drive-by fix for datactrl_blocksz, misspelled.
Cc: Ludovic Barre <ludovic.barre@st.com>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191217143952.2885-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4601832f40 ]
The IPU1 MMU has been using common IOMMU pdata quirks defined and
used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the
pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops
plugged in, so that the IPU1 power domain can be restricted to ON
state during the boot and active period of the IPU1 remote processor.
This eliminates the pre-conditions for the IPU1 boot issue as
described in commit afe518400bdb ("iommu/omap: fix boot issue on
remoteprocs with AMMU/Unicache").
NOTE:
1. RET is not a valid target power domain state on DRA7 platforms,
and IPU power domain is normally programmed for OFF. The IPU1
still fails to boot though, and an unclearable l3_noc error is
thrown currently on 4.14 kernel without this fix. This behavior
is slightly different from previous 4.9 LTS kernel.
2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the
other affected processors on OMAP4/OMAP5/DRA7 are in domains
that are not entering RET. IPU2 on DRA7 is in CORE power domain
which is only programmed for ON power state. The fix can be easily
scaled if these domains do hit RET in the future.
3. The issue was not seen on current DRA7 platforms if any of the
DSP remote processors were booted and using one of the GPTimers
5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the
errata fix for i874 implemented in commit 1cbabcb980 ("ARM:
DRA7: clockdomain: Implement timer workaround for errata i874")
which keeps the IPU1 power domain from entering RET when the
timers are active. But the timer workaround did not make any
difference on 4.14 kernel, and an l3_noc error was seen still
without this fix.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f14101a1d ]
Errata Title:
i879: DSP MStandby requires CD_EMU in SW_WKUP
Description:
The DSP requires the internal emulation clock to be actively toggling
in order to successfully enter a low power mode via execution of the
IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
other prerequisites and software sequence are followed.
Workaround:
The emulation clock to the DSP is free-running anytime CCS is connected
via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.
Implementation:
This patch implements this workaround by denying the HW_AUTO mode
for the EMU clockdomain during the power-up of any DSP processor
and re-enabling the HW_AUTO mode during the shutdown of the last
DSP processor (actually done during the enabling and disabling of
the respective DSP MDMA MMUs). Reference counting has to be used to
manage the independent sequencing between the multiple DSP processors.
This switching is done at runtime rather than a static clockdomain
flags value to meet the target power domain state for the EMU power
domain during suspend.
Note that the DSP MStandby behavior is not consistent across all
boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
details.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c4b540e1 ]
IOMMU driver will be using ti-sysc bus driver for power management control
going forward, and the pdata quirks are not needed for anything anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0eae33b25 ]
Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P
modules are capable of 2500base-X, but incorrectly report their
capabilities in the EEPROM. It seems rather common that GPON modules
mis-report.
Let's fix these modules by adding some quirks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b34bb2cb5b ]
Add support for applying module quirks to the list of supported
ethtool link modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 57a1cd87ef.
Eugeniu Rosca writes:
On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
> of v5.6-rc1 commit 987351e1ea ("phy: core: Add consumer device
> link support"). Getting evidence for that is easy. Reverting
> 987351e1ea in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea ("phy: core: Add consumer device
> link support") to v4.14.187 looks challenging enough, so probably not
> worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
> should the following three v4.14.186 commits be reverted on v4.14.x?
> * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
> * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
> * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 335d720bb4.
Eugeniu Rosca writes:
On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
> of v5.6-rc1 commit 987351e1ea ("phy: core: Add consumer device
> link support"). Getting evidence for that is easy. Reverting
> 987351e1ea in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea ("phy: core: Add consumer device
> link support") to v4.14.187 looks challenging enough, so probably not
> worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
> should the following three v4.14.186 commits be reverted on v4.14.x?
> * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
> * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
> * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit fbf719e5da.
Eugeniu Rosca writes:
On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
> of v5.6-rc1 commit 987351e1ea ("phy: core: Add consumer device
> link support"). Getting evidence for that is easy. Reverting
> 987351e1ea in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea ("phy: core: Add consumer device
> link support") to v4.14.187 looks challenging enough, so probably not
> worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
> should the following three v4.14.186 commits be reverted on v4.14.x?
> * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
> * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
> * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c2b6b4f0 ]
When writing the serdes configuration register was moved to
mvneta_config_interface() the whole code block was removed from
mvneta_port_power_up() in the assumption that its only purpose was to
write the serdes configuration register. As mentioned by Russell King
its purpose was also to check for valid interface modes early so that
later in the driver we do not have to care for unexpected interface
modes.
Add back the test to let the driver bail out early on unhandled
interface modes.
Fixes: b4748553f5 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3d239dcb8 ]
In mvneta_config_interface() the RGMII modes are catched by the default
case which is an error return. The RGMII modes are valid modes for the
driver, so instead of returning an error add a break statement to return
successfully.
This avoids this warning for non comphy SoCs which use RGMII, like
SolidRun Clearfog:
WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c
Fixes: b4748553f5 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0eaf228d57 ]
Call pm_runtime_put_sync() on failure path of at91ether_open.
Fixes: e6a41c23df ("net: macb: ensure interface is not suspended on at91rm9200")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a8d7f126c ]
Commit 209c65b61d ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
introduced a break of the loop on the premise that a successful
registration should exit the loop. The premise is correct but not to
code, because rc && rc != -ENODEV is just a special error condition,
that means we would exit the loop even with rc == -ENODEV which is
absolutely not correct since this is the error code to indicate to the
MDIO bus layer that scanning should continue.
Fix this by explicitly checking for rc = 0 as the only valid condition
to break out of the loop.
Fixes: 209c65b61d ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c525b69e8 ]
During shutdown, the driver should unregister the SPI controller
and stop the hardware. Otherwise the dspi_transfer_one_message() could
wait on completion infinitely.
Additionally, calling spi_unregister_controller() first in device
shutdown reverse-matches the probe function, where SPI controller is
registered at the end.
Fixes: dc23482599 ("spi: spi-fsl-dspi: Adding shutdown hook")
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200622110543.5035-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3f9c6d3879 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Fixes: eec96d1e2d ("iio: health: Add driver for the TI AFE4403 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8db4afe163 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here there is no data leak possibility so use an explicit structure
on the stack to ensure alignment and nice readable fashion.
The forced alignment of ts isn't strictly necessary in this driver
as the padding will be correct anyway (there isn't any). However
it is probably less fragile to have it there and it acts as
documentation of the requirement.
Fixes: 713bbb4efb ("iio: pressure: ms5611: Add triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c49056ad9 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak
apart from previous readings.
Explicit alignment of ts needed to ensure consistent padding
on all architectures (particularly x86_32 with it's 4 byte alignment
of s64)
Fixes: e4a70e3e7d ("iio: humidity: add support to hts221 rh/temp combo device")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7369ae1f4 upstream.
The function iio_device_register() was called in mma8452_probe().
But the function iio_device_unregister() was not called after
a call of the function mma8452_set_freefall_mode() failed.
Thus add the missed function call for one error case.
Fixes: 1a965d405f ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0187294d22 upstream.
When devm_regmap_init_i2c() returns an error code, a pairing
runtime PM usage counter decrement is needed to keep the
counter balanced. For error paths after ak8974_set_power(),
ak8974_detect() and ak8974_reset(), things are the same.
However, When iio_triggered_buffer_setup() returns an error
code, there will be two PM usgae counter decrements.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Fixes: 7c94a8b2ee ("iio: magn: add a driver for AK8974")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea5e7a7bb6 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart
from previous readings.
Fixes: 16bf793f86 ("iio: humidity: hdc100x: add triggered buffer support for HDC100X")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 838e00b13b upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak appart from
previous readings.
Fixes: 7c94a8b2ee ("iio: magn: add a driver for AK8974")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5679b28142 ]
Commit f7b93d4294 ("arm64/alternatives: use subsections for replacement
sequences") moved the alternatives replacement sequences into subsections,
in order to keep the as close as possible to the code that they replace.
Unfortunately, this broke the logic in branch_insn_requires_update,
which assumed that any branch into kernel executable code was a branch
that required updating, which is no longer the case now that the code
sequences that are patched in are in the same section as the patch site
itself.
So the only way to discriminate branches that require updating and ones
that don't is to check whether the branch targets the replacement sequence
itself, and so we can drop the call to kernel_text_address() entirely.
Fixes: f7b93d4294 ("arm64/alternatives: use subsections for replacement sequences")
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f90786b31 ]
The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b780cc615b ]
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccf6fb858e ]
Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
variable dereferenced before check 'chip->ops' (see line 979)
'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7b93d4294 ]
When building very large kernels, the logic that emits replacement
sequences for alternatives fails when relative branches are present
in the code that is emitted into the .altinstr_replacement section
and patched in at the original site and fixed up. The reason is that
the linker will insert veneers if relative branches go out of range,
and due to the relative distance of the .altinstr_replacement from
the .text section where its branch targets usually live, veneers
may be emitted at the end of the .altinstr_replacement section, with
the relative branches in the sequence pointed at the veneers instead
of the actual target.
The alternatives patching logic will attempt to fix up the branch to
point to its original target, which will be the veneer in this case,
but given that the patch site is likely to be far away as well, it
will be out of range and so patching will fail. There are other cases
where these veneers are problematic, e.g., when the target of the
branch is in .text while the patch site is in .init.text, in which
case putting the replacement sequence inside .text may not help either.
So let's use subsections to emit the replacement code as closely as
possible to the patch site, to ensure that veneers are only likely to
be emitted if they are required at the patch site as well, in which
case they will be in range for the replacement sequence both before
and after it is transported to the patch site.
This will prevent alternative sequences in non-init code from being
released from memory after boot, but this is tolerable given that the
entire section is only 512 KB on an allyesconfig build (which weighs in
at 500+ MB for the entire Image). Also, note that modules today carry
the replacement sequences in non-init sections as well, and any of
those that target init code will be emitted into init sections after
this change.
This fixes an early crash when booting an allyesconfig kernel on a
system where any of the alternatives sequences containing relative
branches are activated at boot (e.g., ARM64_HAS_PAN on TX2)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200630081921.13443-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19e888678b ]
The wait_event_... defines evaluate to long so we should not assign it an int as this may truncate
the value.
Reported-by: Marshall Midden <marshallmidden@gmail.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35b9c0fdb9 ]
Fix unit address to match the first address specified in the reg
property of the node in example.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c43e55796d ]
After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was
hanging silently.
memblock_add() seems not appropriate, since using MAX_NUMNODES
as node id, while memblock_add_node() sets up memory for node id 0.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d63bd8c81d ]
The m68k nommu setup code didn't register the beginning of the physical
memory with memblock because it was anyway occupied by the kernel. However,
commit fa3354e4ea ("mm: free_area_init: use maximal zone PFNs rather than
zone sizes") changed zones initialization to use memblock.memory to detect
the zone extents and this caused inconsistency between zone PFNs and the
actual PFNs:
BUG: Bad page state in process swapper pfn:20165
page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1
Stack from 404c9ebc:
404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4
00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21
00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000
00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001
400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04
41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff
Call Trace:
[<40088470>] 0x40088470
[<40088504>] 0x40088504
[<40088a12>] 0x40088a12
[<402ca000>] 0x402ca000
[<400a0934>] 0x400a0934
Adjust the memory registration with memblock to include the beginning of
the physical memory and make sure that the area occupied by the kernel is
marked as reserved.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfe373f608 ]
Else there may be magic numbers in /sys/kernel/debug/block/*/state.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b45fd13be3 ]
After finishing using cpu node got from of_get_cpu_node(), of_node_put()
needs to be called.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1585232945-23368-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haibo Chen