This has been a slightly more active cycle than normal with ongoing core
changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and fixing
the various unregistration race conditions in rxe's unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
* Drivers should not assume umem SGLs are in PAGE_SIZE chunks
* ucontext is accessed via udata not other means
* Start to make the core code responsible for object memory
allocation
* Drivers should convert struct device to struct ib_device
via a helper
* Drivers have more tools to avoid use after unregister problems
-----BEGIN PGP SIGNATURE-----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=p12E
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d
O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm
AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K
CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5
gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS
MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha
iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O
ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4
idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr
6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U
ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor
cbMcPAN2jOCyFVs=
=vf9L
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Use match_string() instead of reimplementing it (Andy Shevchenko)
- Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn
Helgaas)
- Save/restore LTR info for suspend/resume (Bjorn Helgaas)
- Fix DPC use of uninitialized data (Dongdong Liu)
- Probe bridge window attributes only once at enumeration-time to fix
device accesses during rescan (Bjorn Helgaas)
- Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
Changbin)
- Use config header type (not class code) identify bridges more
reliably (Honghui Zhang)
- Work around Intel Denverton incorrect Trace Hub BAR size reporting
(Alexander Shishkin)
- Reorder pciehp cached state/hardware state updates to avoid missed
interrupts (Mika Westerberg)
- Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)
- Mark expected switch fall-through (Mathieu Malaterre)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)
- Consolidate Rohm Vendor ID definitions (Andy Shevchenko)
- Use u32 (not __u32) for things not exposed to userspace (Logan
Gunthorpe)
- Fix locking semantics of bus and slot reset interfaces (Alex
Williamson)
- Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)
- Allow portdrv to claim subtractive decode Ports so PCIe services will
work for them (Honghui Zhang)
- Report PCIe links that become degraded at run-time (Alexandru
Gagniuc)
- Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
hotplug (Mika Westerberg)
- Revert runtime PM suspend/resume callbacks that broke PME on network
cable plug (Mika Westerberg)
- Disable Data Link State Changed interrupts to prevent wakeup
immediately after suspend (Mika Westerberg)
- Extend altera to support Stratix 10 (Ley Foon Tan)
- Allow building altera driver on ARM64 (Ley Foon Tan)
- Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
maintainer (Lorenzo Pieralisi)
- Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)
- Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)
- Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
Abraham I)
- Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)
- Simplify dwc (remove unnecessary header includes, name variables
consistently, reduce inverted logic, etc) (Gustavo Pimentel)
- Add i.MX8MQ support (Andrey Smirnov)
- Add message to help debug dwc MSI-X mask bit errors (Gustavo
Pimentel)
- Work around imx7d PCIe PLL erratum (Trent Piepho)
- Don't assert qcom reset GPIO during probe (Bjorn Andersson)
- Skip dwc MSI init if MSIs have been disabled (Lucas Stach)
- Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
endpoint framework (Wen Yang)
- Add interface to discover supported endpoint features to replace a
bitfield that wasn't flexible enough (Kishon Vijay Abraham I)
- Implement the new supported-feature interface for designware-plat,
dra7xx, rockchip, cadence (Kishon Vijay Abraham I)
- Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)
- Add layerscape endpoint mode support (Xiaowei Bao)
- Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
Nakamura)
- Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
open-coded reimplementation (Maya Nakamura)
- Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)
- Fix mediatek MMIO size computation to enable full size of available
MMIO space (Honghui Zhang)
- Fix mediatek DMA window size computation to allow endpoint DMA access
to full DRAM address range (Honghui Zhang)
- Fix mvebu prefetchable BAR regression caused by common bridge
emulation that assumed all bridges had prefetchable windows (Thomas
Petazzoni)
- Make advk_pci_bridge_emul_ops static (Wei Yongjun)
- Configure MPS settings for VMD root ports (Jon Derrick)
* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
PCI: Update PCIEPORTBUS Kconfig help text
PCI: Fix "try" semantics of bus and slot reset
PCI/LINK: Report degraded links via link bandwidth notification
dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
PCI: altera: Enable driver on ARM64
PCI: altera: Add Stratix 10 PCIe support
PCI/PME: Fix possible use-after-free on remove
PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
PCI: dwc: skip MSI init if MSIs have been explicitly disabled
PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
PCI: hv: Replace hv_vp_set with hv_vpset
PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
PCI: mediatek: Fix memory mapped IO range size computation
PCI: dwc: Remove superfluous shifting in definitions
PCI: dwc: Make use of GENMASK/FIELD_PREP
PCI: dwc: Make use of BIT() in constant definitions
PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
PCI: dwc: Make use of IS_ALIGNED()
PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
...
-----BEGIN PGP SIGNATURE-----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=tD1x
-----END PGP SIGNATURE-----
Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove sensor drivers that got converted from soc_camera
- remaining soc_camera drivers got moved to staging
- some documentation cleanups and improvements
- the imx staging driver now supports imx7
- the ov9640, mt9m001 and mt9m111 got converted from soc_camera
- the vim2m driver now does what a m2m convert driver expects to do
- epoll() fixes on media subsystems
- several drivers fixes, typos, cleanups and improvements
* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
media: dvb/earth-pt1: fix wrong initialization for demod blocks
media: vim2m: Address some coding style issues
media: vim2m: don't use BUG()
media: vim2m: speedup passthrough copy
media: vim2m: add an horizontal scaler
media: vim2m: don't accept YUYV anymore as output format
media: vim2m: add vertical linear scaler
media: vim2m: better handle cap/out buffers with different sizes
media: vim2m: use different framesizes for bayer formats
media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
media: vim2m: ensure that width is multiple of two
media: vim2m: improve debug messages
media: vim2m: add bayer capture formats
media: a few more typos at staging, pci, platform, radio and usb
media: Documentation: fix several typos
media: staging: fix several typos
media: include: fix several typos
media: common: fix several typos
media: v4l2-core: fix several typos
media: usb: fix several typos
...
- Fix a hang related to missed wakeups for glocks from Andreas Gruenbacher.
- Rework of how gfs2 manages its debugfs files from Greg K-H.
- An incorrect assert when truncating or deleting files from Tim Smith.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcgqv8AAoJENeLYdPf93o7rJoIAJvTdAaTuU0IGRSC+LTfo6do
0bvALvhqfBDpZDqhRXR+z9Nkb6L5SP4S9iDvPMho+abznXN/ORMn8uZeY3dD/zon
vEI1OHT8/WTCzmJZX2Kw2Cbm/nap6NNr+ypXkcSpKVmzchXRLRkdux/Kt6vf26SV
N8Qb5jNY476n+jeDfemlaODkOmwGEUv/CdNZXHMuv4jdmUpzKQroBAAmVhxx01nz
IugUsqAX5q8VNYha2Rm0JWnAMMQRZjQ3ajHgYwLTDzJf/c9pGs9OetK8vpMP2aAz
W+Fpd4r76/UsaZE70il31yq4BJ7PgcqrerJVH6IvWnulm8jIphQf5+yU9QOAHVo=
=n1GT
-----END PGP SIGNATURE-----
Merge tag 'gfs2-5.1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've only got three patches ready for this merge window:
- Fix a hang related to missed wakeups for glocks from Andreas
Gruenbacher
- Rework of how gfs2 manages its debugfs files from Greg K-H
- An incorrect assert when truncating or deleting files from Tim
Smith"
* tag 'gfs2-5.1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix missed wakeups in find_insert_glock
gfs2: Fix an incorrect gfs2_assert()
gfs: no need to check return value of debugfs_create functions
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAlyCm8sACgkQiiy9cAdy
T1HeQwwAvlV0Wkbg+c24musbdsKLZ0WpT8SFV1gaA0hA8090WxfETp+RxuUbHefY
/pHfZj0zIsi2LEU22zw9tZtypKPD8d/Zt6LTZjCwW55c6HepTxnAwUDwpkGHD02e
Rcau4ahGIWrcrbCJikG8XrAk+4ZOy52Vjf15JQR2Z8Ctt79UBJMqtKl6P90aZL/W
HcpKNhrV+J7bLoWzZYRomKq/nnL+qKEV2JLk8ig065auBQWMKvvyBQAanmJG+vBf
sgqXuE4x+cxpzClkJQ4aWMeEkgjyWuhRk6+y5qXaAGCHtUVotkZse1Dwtx52HjcW
f6yC80CT2+vf7yoXW2YqJR28pJQoACbtZPgqMUPe+n6ojZIogWwJ2cBgVKqg8+dY
IxTrGNHqvVy8jz3T8A9H4xRKse53Oob5gzAYnxk8zjFzt3aj/2mOw4YKENzHLzVI
iJRLsBXo9JpSgEoiGDvGseabc5Z98BdQ7rzhg0kT2U9g+lopN42FRY5UOaG6n1oz
V6tY2+FU
=w3ho
-----END PGP SIGNATURE-----
Merge tag '5.1-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 updates from Steve French:
- smb3/cifs fixes including for large i/o error cases
- fixes for three xfstests
- improved crediting (smb3 flow control)
- improved tracing
* tag '5.1-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (44 commits)
fs: cifs: Kconfig: pedantic formatting
smb3: request more credits on normal (non-large read/write) ops
CIFS: Mask off signals when sending SMB packets
CIFS: Return -EAGAIN instead of -ENOTSOCK
CIFS: Only send SMB2_NEGOTIATE command on new TCP connections
CIFS: Fix read after write for files with read caching
smb3: for kerberos mounts display the credential uid used
cifs: use correct format characters
smb3: add dynamic trace point for query_info_enter/done
smb3: add dynamic trace point for smb3_cmd_enter
smb3: improve dynamic tracing of open and posix mkdir
smb3: add missing read completion trace point
smb3: Add tracepoints for read, write and query_dir enter
smb3: add tracepoints for query dir
smb3: Update POSIX negotiate context with POSIX ctxt GUID
cifs: update internal module version number
CIFS: Try to acquire credits at once for compound requests
CIFS: Return error code when getting file handle for writeback
CIFS: Move open file handling to writepages
CIFS: Move unlocking pages from wdata_send_pages()
...
First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer for
fscrypt, and we're now using a shared git tree. So we've updated
MAINTAINERS accordingly, and I'm doing the pull request this time.
The actual changes for v5.1 are:
- Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION and
make fscrypt support for all fscrypt-capable filesystems be controlled
by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA works.
- Improve error code for rename() and link() into encrypted directories.
- Various cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXH2YDRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+SAAQCWYOTwYko8uE8Ze8i2fiUm0vr91NOg
zj5DGmK7Izxy/gEAsNDOVA7zWrDg/f5600/7aLpDQQTGHA38YVsgiyd7DgY=
=S3tT
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer
for fscrypt, and we're now using a shared git tree. So we've updated
MAINTAINERS accordingly, and I'm doing the pull request this time.
The actual changes for v5.1 are:
- Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION
and make fscrypt support for all fscrypt-capable filesystems be
controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA
works.
- Improve error code for rename() and link() into encrypted
directories.
- Various cleanups"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
MAINTAINERS: add Eric Biggers as an fscrypt maintainer
fscrypt: return -EXDEV for incompatible rename or link into encrypted dir
fscrypt: remove filesystem specific build config option
f2fs: use IS_ENCRYPTED() to check encryption status
ext4: use IS_ENCRYPTED() to check encryption status
fscrypt: remove CRYPTO_CTR dependency
Here are two super trivial patches to the leaking addresses script for
the 5.1-rc1 merge window. One fixes the debugging output which is
currently broken in a bunch of places, the other removes the --version
command line option.
Both patches have been tested and sitting in linux-next tree for a month
or so.
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7U0N
-----END PGP SIGNATURE-----
Merge tag 'leaks-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks
Pull leaking_addresses updates from Tobin Harding:
"Here are two super trivial patches to the leaking addresses script.
One fixes the debugging output which is currently broken in a bunch of
places, the other removes the --version command line option.
Both patches have been tested and sitting in linux-next tree for a
month or so"
* tag 'leaks-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks:
leaking_addresses: Completely remove --version flag
leaking_addresses: Fix calls to dprint
and more translations. There's also some LICENSES adjustments from
Thomas.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlyBl54PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YxoYH/3OcInUSk17Cb+wNpnJX66dXyVvzZcuAh5aU
HW5YWIIlp60jwsM0z+sVqNR51tfC+eMjw2HOWj0hOEUju7UGm7aDtB+WkEeJ7GUk
e/FX+GXD/OygQtpwXRQraWU/RO3RPSB9JKodF5tQ6aihOzsQGB9c11I0/f3Qp7+U
vaLBOdAlpQYemlzLKbskRZ2YpokELfpgwSb6O7mpI9i3mJeZA/lpyYSmHQxqwvG7
sqrmm7vHB7b0tZGqQISQaZNdUmSSD1lRfOX3brFw2DOIj2V2M1+O/8smBtRuAGf5
B03C7LjkNFn55tn1OHYlWEv8RpG5kH3VNc896jiWPDOXNpMSgl8=
=bOsl
-----END PGP SIGNATURE-----
Merge tag 'docs-5.1' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fairly routine cycle for docs - lots of typo fixes, some new
documents, and more translations. There's also some LICENSES
adjustments from Thomas"
* tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits)
docs: Bring some order to filesystem documentation
Documentation/locking/lockdep: Drop last two chars of sample states
doc: rcu: Suspicious RCU usage is a warning
docs: driver-api: iio: fix errors in documentation
Documentation/process/howto: Update for 4.x -> 5.x versioning
docs: Explicitly state that the 'Fixes:' tag shouldn't split lines
doc: security: Add kern-doc for lsm_hooks.h
doc: sctp: Merge and clean up rst files
Docs: Correct /proc/stat path
scripts/spdxcheck.py: fix C++ comment style detection
doc: fix typos in license-rules.rst
Documentation: fix admin-guide/README.rst minimum gcc version requirement
doc: process: complete removal of info about -git patches
doc: translations: sync translations 'remove info about -git patches'
perf-security: wrap paragraphs on 72 columns
perf-security: elaborate on perf_events/Perf privileged users
perf-security: document collected perf_events/Perf data categories
perf-security: document perf_events/Perf resource control
sysfs.txt: add note on available attribute macros
docs: kernel-doc: typo "if ... if" -> "if ... is"
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dXuJ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to sort mixed lines by an extra information about the caller
- Remove no longer used LOG_PREFIX.
- Some clean up and documentation update.
* tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk/docs: Add extra integer types to printk-formats
printk: Remove no longer used LOG_PREFIX.
lib/vsprintf: Remove %pCr remnant in comment
printk: Pass caller information to log_store().
printk: Add caller information to printk() output.
This Kselftest update for Linux 5.1-rc1 consists of
- ir test compile warnings fixes
- seccomp test fixes and improvements from Tycho Andersen and Kees Cook
- ftrace fixes to non-POSIX-compliant constructs in colored output code
and handling absence of tput from Juerg Haefliger
-----BEGIN PGP SIGNATURE-----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=1CrX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update fromShuah Khan:
- ir test compile warnings fixes
- seccomp test fixes and improvements from Tycho Andersen and Kees Cook
- ftrace fixes to non-POSIX-compliant constructs in colored output code
and handling absence of tput from Juerg Haefliger
* tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Handle the absence of tput
selftests/ftrace: Replace \e with \033
selftests/ftrace: Replace echo -e with printf
selftests: ir: skip when non-root user runs the test
selftests: ir: skip when lirc device doesn't exist.
selftests: ir: fix warning: "%s" directive output may be truncated ’ directive output may be truncated
selftests/seccomp: Actually sleep for 1/10th second
selftests/harness: Update named initializer syntax
selftests: unshare userns in seccomp pidns testcases
selftests: set NO_NEW_PRIVS bit in seccomp user tests
selftests: skip seccomp get_metadata test if not real root
selftest: include stdio.h in kselftest.h
selftests: fix typo in seccomp_bpf.c
selftests: don't kill child immediately in get_metadata() test
- And scalar and array initialization coverage
- Refactor Kconfig to make options more clear
- Add self-test module for testing automatic initialization
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=6iu3
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc-plugins updates from Kees Cook:
"This adds additional type coverage to the existing structleak plugin
and adds a large set of selftests to help evaluate stack variable
zero-initialization coverage.
That can be used to test whatever instrumentation might be performing
zero-initialization: either with the structleak plugin or with Clang's
coming "-ftrivial-auto-var-init=zero" option.
Summary:
- Add scalar and array initialization coverage
- Refactor Kconfig to make options more clear
- Add self-test module for testing automatic initialization"
* tag 'gcc-plugins-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: Introduce test_stackinit module
gcc-plugins: structleak: Generalize to all variable types
Fixes: ("MAINTAINERS: Update from @linux.vnet.ibm.com to @linux.ibm.com")
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=p78E
-----END PGP SIGNATURE-----
Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block
Pull io_uring IO interface from Jens Axboe:
"Second attempt at adding the io_uring interface.
Since the first one, we've added basic unit testing of the three
system calls, that resides in liburing like the other unit tests that
we have so far. It'll take a while to get full coverage of it, but
we're working towards it. I've also added two basic test programs to
tools/io_uring. One uses the raw interface and has support for all the
various features that io_uring supports outside of standard IO, like
fixed files, fixed IO buffers, and polled IO. The other uses the
liburing API, and is a simplified version of cp(1).
This adds support for a new IO interface, io_uring.
io_uring allows an application to communicate with the kernel through
two rings, the submission queue (SQ) and completion queue (CQ) ring.
This allows for very efficient handling of IOs, see the v5 posting for
some basic numbers:
https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/
Outside of just efficiency, the interface is also flexible and
extendable, and allows for future use cases like the upcoming NVMe
key-value store API, networked IO, and so on. It also supports async
buffered IO, something that we've always failed to support in the
kernel.
Outside of basic IO features, it supports async polled IO as well.
This particular feature has already been tested at Facebook months ago
for flash storage boxes, with 25-33% improvements. It makes polled IO
actually useful for real world use cases, where even basic flash sees
a nice win in terms of efficiency, latency, and performance. These
boxes were IOPS bound before, now they are not.
This series adds three new system calls. One for setting up an
io_uring instance (io_uring_setup(2)), one for submitting/completing
IO (io_uring_enter(2)), and one for aux functions like registrating
file sets, buffers, etc (io_uring_register(2)). Through the help of
Arnd, I've coordinated the syscall numbers so merge on that front
should be painless.
Jon did a writeup of the interface a while back, which (except for
minor details that have been tweaked) is still accurate. Find that
here:
https://lwn.net/Articles/776703/
Huge thanks to Al Viro for helping getting the reference cycle code
correct, and to Jann Horn for his extensive reviews focused on both
security and bugs in general.
There's a userspace library that provides basic functionality for
applications that don't need or want to care about how to fiddle with
the rings directly. It has helpers to allow applications to easily set
up an io_uring instance, and submit/complete IO through it without
knowing about the intricacies of the rings. It also includes man pages
(thanks to Jeff Moyer), and will continue to grow support helper
functions and features as time progresses. Find it here:
git://git.kernel.dk/liburing
Fio has full support for the raw interface, both in the form of an IO
engine (io_uring), but also with a small test application (t/io_uring)
that can exercise and benchmark the interface"
* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
io_uring: add a few test tools
io_uring: allow workqueue item to handle multiple buffered requests
io_uring: add support for IORING_OP_POLL
io_uring: add io_kiocb ref count
io_uring: add submission polling
io_uring: add file set registration
net: split out functions related to registering inflight socket files
io_uring: add support for pre-mapped user IO buffers
block: implement bio helper to add iter bvec pages to bio
io_uring: batch io_kiocb allocation
io_uring: use fget/fput_many() for file references
fs: add fget_many() and fput_many()
io_uring: support for IO polling
io_uring: add fsync support
Add io_uring IO interface
-----BEGIN PGP SIGNATURE-----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=VBaU
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"Not a huge amount of changes in this round, the biggest one is that we
finally have Mings multi-page bvec support merged. Apart from that,
this pull request contains:
- Small series that avoids quiescing the queue for sysfs changes that
match what we currently have (Aleksei)
- Series of bcache fixes (via Coly)
- Series of lightnvm fixes (via Mathias)
- NVMe pull request from Christoph. Nothing major, just SPDX/license
cleanups, RR mp policy (Hannes), and little fixes (Bart,
Chaitanya).
- BFQ series (Paolo)
- Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
for the fast path (Jianchao)
- fops->iopoll() added for async IO polling, this is a feature that
the upcoming io_uring interface will use (Christoph, me)
- Partition scan loop fixes (Dongli)
- mtip32xx conversion from managed resource API (Christoph)
- cdrom registration race fix (Guenter)
- MD pull from Song, two minor fixes.
- Various documentation fixes (Marcos)
- Multi-page bvec feature. This brings a lot of nice improvements
with it, like more efficient splitting, larger IOs can be supported
without growing the bvec table size, and so on. (Ming)
- Various little fixes to core and drivers"
* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
block: fix updating bio's front segment size
block: Replace function name in string with __func__
nbd: propagate genlmsg_reply return code
floppy: remove set but not used variable 'q'
null_blk: fix checking for REQ_FUA
block: fix NULL pointer dereference in register_disk
fs: fix guard_bio_eod to check for real EOD errors
blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
block: optimize bvec iteration in bvec_iter_advance
block: introduce mp_bvec_for_each_page() for iterating over page
block: optimize blk_bio_segment_split for single-page bvec
block: optimize __blk_segment_map_sg() for single-page bvec
block: introduce bvec_nth_page()
iomap: wire up the iopoll method
block: add bio_set_polled() helper
block: wire up block device iopoll method
fs: add an iopoll method to struct file_operations
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
loop: do not print warn message if partition scan is successful
block: bounce: make sure that bvec table is updated
...
-----BEGIN PGP SIGNATURE-----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=WWuH
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe:
"Pretty quiet round: a few small fixes, comment typo, and most notably
a low level driver for the PATA Buddha controller"
* tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block:
ata: libahci: Only warn for AHCI_HFLAG_MULTI_MSI set when genuine custom irq handler implemented
libata: fix a typo in comment
ata: macio: Use of_node_name_eq for node name comparisons
ata: pata_samsung_cf: simplify getting .driver_data
ata: pata_platform: Add IRQF_SHARED to IRQ flags
ata: pata_of_platform: Allow to use 16-bit wide data transfer
ata: add Buddha PATA controller driver
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcgoLEAAoJEEEQszewGV1zjBAP/3OmTFGv49PFmJwSx+PlLiYf
V6/UPaQzq81CGSMtHxbS51TyP9Id7PCfsacbuFYutzn0D1efvl7jrkb8qJ6fVvCM
bl/i6q8ipRTPzAf1hD3QCgCe3BXCA064/OcPrz987oIvI3bJQXsmBjBSXHWr4Cwa
WfB5DX/afn9TK3XHhMQGfw5f0d+TtnKAs90RTTVKiz9Ow8eFYZJOhgPkvhCR3Gi9
YJIzIAiwhHZ7/zauo4JAYFU/O/Z3YEC5zeLne2ItebzNooRkSxdz0c9Hs7HlCZmU
930Uv9jNN89N3vPqpZzAHtPvwDOmAILMWvKy9xRSp+eoIukarRJgF7ALPk7QWxK1
yy+tGj4dXBQ6tI8W3wUN1WgjNpii3K1HbJ+1LQVQL2/q9o+3YXXqmjdjuw7C8YYV
5ystNrUppkgfIIciHL4lhqw3wKJJhVEAns2V245hIitoShT+RvIg8GQbGZmWlQFd
YsHbynqHL9iwfRNv26kEqZXZOo/4D1t6Scw+OPVyba2Wyttf+qbmg+XaYMqFaxYW
mfydvdtymeCOUIPJMzw58KGPUTXJ4UPLENyayXNUHokr1a8VO8OIthY7zwi0CpvJ
IcsAY9zoGxvfbRV922mlIsw3oOBcM2IN2lC9sY469ZVnjBrdC3rsQpIBZr+Vzz8i
YlUfXLSGSyuUZUz//2eG
=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
- Allow GPIO call to sleep; pwm_bl
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlyA5Q8ACgkQUa+KL4f8
d2GQ1w/9ExXZLOaL6XKWEqHENPoi1Y2wrLNgyaJzdh16XbjEXKUBw4s43FB0PJfY
ZO8lnrFTONPbW9Map8RFefsHwodc5hW6cvytoG2B2EzhTe8I0z4iIUPVNrkPScM9
TGPjd6Odl6NxfDlhdur4oBjC2pXPrgjgTDSOquzi99z4hp6rqzIeJPqCXRzYijJY
e/qfN0yhB5SeQezjCsEgIey0vLNTiGZ21x/snf0xNeuMOqnu0e56J50tvbm1Z1Yw
JUif8NTWUazHuzpMZnI3ZfR0Uycny4MDfb4rKtFZoSUbyU2krdAjv3r8/xPJTPYR
8f8RD41hjqRKnluTfPdnQ8bM3LEp33sYFgBwn8RZi/gX92ZUUzuBFODyk5uKUs67
NYqhsAC0BA/QTjercmuuf1ZSYIuetMbsU1/wxaZQC9TT2cO5xlex8RkqGdD+GwD+
RgWTP8wN7n4nAe1Z9TbzWXGpRLyvMUgF1jtzvBw7Tz83dZZGH/NkqcjtYwIXKPRv
xWuOLyrQJwnLsfLi12mhSZAte5VDPi11PKy2YCsEHI6P6o16N3uW/Au/qOqj51AR
xX/5OB84Lb9mlUwnIwBiuKYVVb2nasCtRNZ7bnZZryeH2KWVvFQOEB8QdG0TLLM2
WJv4ruE80peNmVAazrKit4SkM6uZ85hi/NqcE5K7ywDcRgf0VxA=
=E8a6
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight fixlet from Lee Jones:
"Allow GPIO call to sleep in pwm_bl driver"
* tag 'backlight-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state
Subsystem:
- new quartz-load-femtofarads DT property for quartz load capacitance
- remove rtc_class_ops.read_callback
New drivers:
- Abracon AB-RTCMC-32.768kHz-EOZ9
- Amlogic Meson RTC
- Cadence RTC IP
- Microcrystal RV3028
- Whwave sd3078
Drivers:
- cmos: ignore bogus century byte
- ds1307: rework rx8130 support
- isl1208: add isl1209 support, nvmem support
- rs5C372: report invalid time when the oscillator stopped
- rx8581: add rx8571 support
-----BEGIN PGP SIGNATURE-----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=/Noj
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is an unusual amount of new drivers this cycle, and this
explains the number of insertions.
Other than that, the changes are the usual fixes and feature addition.
Subsystem updates:
- new quartz-load-femtofarads DT property for quartz load capacitance
- remove rtc_class_ops.read_callback
New drivers:
- Abracon AB-RTCMC-32.768kHz-EOZ9
- Amlogic Meson RTC
- Cadence RTC IP
- Microcrystal RV3028
- Whwave sd3078
Driver updates:
- cmos: ignore bogus century byte
- ds1307: rework rx8130 support
- isl1208: add isl1209 support, nvmem support
- rs5C372: report invalid time when the oscillator stopped
- rx8581: add rx8571 support"
* tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
rtc: pic32: convert to SPDX identifier
rtc: pic32: let the core handle range
rtc: pic32: convert to devm_rtc_allocate_device
rtc: update my email address
rtc: rv8803: convert to SPDX identifier
rtc: rv8803: let the core handle range
rtc: tx4939: convert to SPDX identifier
rtc: tx4939: use .set_time
rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: tx4939: set range
rtc: tx4939: remove useless test
rtc: zynqmp: let the core handle range
rtc: zynqmp: fix possible race condition
rtc: imx-sc: use rtc_time64_to_tm
rtc: rx8581: Add support for Epson rx8571 RTC
dt-bindings: rtc: add rx8571 compatible
rtc: pcf85063: remove dead code
rtc: remove rtc_class_ops.read_callback
rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
dt-bindings: rtc: add ABEOZ9
...
Pull thermal soc updates from Eduardo Valentin:
"Specifics:
- mediatek thermal now supports MT8183
- broadcom thermal now supports Stingray
- qoirq now supports multiple sensors
- fixes on different drivers: rcar, tsens, tegra
Some new drivers are still pending further review and I chose to leave
them for the next merge window while still sending this material"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: rcar_gen3_thermal: Register hwmon sysfs interface
thermal/qcom/tsens-common : fix possible object reference leak
thermal: tegra: add get_trend ops
thermal: tegra: fix memory allocation
thermal: tegra: remove unnecessary warnings
thermal: mediatek: add support for MT8183
dt-bindings: thermal: add binding document for mt8183 thermal controller
thermal: mediatek: add flag for bank selection
thermal: mediatek: add thermal controller offset
thermal: mediatek: add calibration item
thermal: mediatek: add common index of vts settings.
thermal: mediatek: fix register index error
thermal: qoriq: add multiple sensors support
thermal: broadcom: Add Stingray thermal driver
dt-bindings: thermal: Add binding document for SR thermal
Pull ibft updates from Konrad Rzeszutek Wilk:
"Two tiny fixes - a missing break, and upgrading the subsystem to use
modern macros"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus
iscsi_ibft: Fix missing break in switch statement
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Expands the SWIOTLB to have debugfs support (along with bug-fixes),
and a tiny fix"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
swiotlb: checking whether swiotlb buffer is full with io_tlb_used
swiotlb: add debugfs to track swiotlb buffer usage
swiotlb: fix comment on swiotlb_bounce()
Pull i2c updates from Wolfram Sang:
- the I2C core gained helpers to assist drivers in handling their
suspended state, and drivers were converted to use it
- two new fault-injectors for stress-testing
- bigger refactoring and feature improvements for the ocores,
sh_mobile, and tegra drivers
- platform_data removal for the at24 EEPROM driver
- ... and various improvements and bugfixes all over the subsystem
* 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: Allow recovery of the initial IRQ by an I2C client device.
i2c: ocores: turn incomplete kdoc into a comment
i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
i2c: tegra: Only display error messages if DMA setup fails
i2c: gpio: fault-injector: add 'inject_panic' injector
i2c: gpio: fault-injector: add 'lose_arbitration' injector
i2c: tegra: remove multi-master support
i2c: tegra: remove master fifo support on tegra186
i2c: tegra: change phrasing, "fallbacking" to "falling back"
i2c: expand minor range when registering chrdev region
i2c: aspeed: Add multi-master use case support
i2c: core-smbus: don't trace smbus_reply data on errors
i2c: ocores: Add support for bus clock via platform data
i2c: ocores: Add support for IO mapper registers.
i2c: ocores: checkpatch fixes
i2c: ocores: add SPDX tag
i2c: ocores: add polling interface
i2c: ocores: do not handle IRQ if IF is not set
i2c: ocores: stop transfer on timeout
i2c: tegra: add i2c interface timing support
...
* at91-reset: add sam9x60 support
* sc27xx: improve capacity logic
* goldfish_battery: enhance driver by adding many new properties
* isp1704: drop platform data and migrate to gpiod
* misc. small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=Etl6
-----END PGP SIGNATURE-----
Merge tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Nothing too fancy in the power-supply subsystem this time. There are
less patches than usual, since I did not have enough time to review
them in time. The good news is, that all patches have been in
linux-next for more than two weeks and there are no complicated
cross-subsystem patchsets this time!
Summary:
- at91-reset: add sam9x60 support
- sc27xx: improve capacity logic
- goldfish_battery: enhance driver by adding many new properties
- isp1704: drop platform data and migrate to gpiod
- misc small fixes and improvements"
* tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits)
power: reset: at91-reset: add support for sam9x60 SoC
dt-bindings: arm: atmel: add new sam9x60 reset controller binding
dt-bindings: arm: atmel: add missing samx7 to reset controller
max17042_battery: fix potential use-after-free on device remove
power: supply: core: Add a field to support battery max voltage
dt-bindings: power: supply: Add voltage-max-design-microvolt property
bq27x00: use cached flags
power: supply: ds2782: fix possible use-after-free on remove
power: supply: bq25890: show max charge current/voltage as configured
power: supply: sc27xx: Fix capacity saving function
power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
power: supply: sc27xx: Add one property to read charge voltage
dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage
drivers: power: supply: goldfish_battery: Add support for reading more properties
power: supply: charger-manager: Fix trivial language typos
cpcap-charger: generate events for userspace
power: supply: remove some duplicated includes
power: twl4030: fix a missing check of return value
drivers: power: supply: goldfish_battery: Use tabs for alignment
drivers: power: supply: goldfish_battery: Fix alignment
...
* Fix a use after free error in a certain error situation.
* Fix some flag handling issues in the SSIF (I2C) IPMI driver.
* A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
use standard UUID handling, and some other minor stuff.
* The IPMI code was creating a platform device if none was supplied.
Instead of doing that, have every source that creates an IPMI
device supply a device struct. This fixes several issues,including
a crash in one situation, and cleans things up a bit.
-----BEGIN PGP SIGNATURE-----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=LSch
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of bug fixes and a bunch of code cleanup:
- Fix a use after free error in a certain error situation.
- Fix some flag handling issues in the SSIF (I2C) IPMI driver.
- A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
use standard UUID handling, and some other minor stuff.
- The IPMI code was creating a platform device if none was supplied.
Instead of doing that, have every source that creates an IPMI
device supply a device struct. This fixes several issues,including
a crash in one situation, and cleans things up a bit"
* tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi:
ipmi_si: Potential array underflow in hotmod_handler()
ipmi_si: Remove hacks for adding a dummy platform devices
ipmi_si: Consolidate scanning the platform bus
ipmi_si: Remove hotmod devices on removal and exit
ipmi_si: Remove hardcode IPMI devices by scanning the platform bus
ipmi_si: Switch hotmod to use a platform device
ipmi: Consolidate the adding of platform devices
ipmi_si: Rename addr_type to addr_space to match what it does
ipmi_si: Convert some types into unsigned
ipmi_si: Fix crash when using hard-coded device
ipmi: Use dedicated API for copying a UUID
ipmi: Use defined constant for UUID representation
ipmi:ssif: Change some pr_xxx to dev_xxx calls
ipmi: kcs_bmc: handle devm_kasprintf() failure case
ipmi: Fix return value when a message is truncated
ipmi: clean an indentation issue, remove extraneous space
ipmi: Make the smi watcher be disabled immediately when not needed
ipmi: Fix how the lower layers are told to watch for messages
ipmi: Fix SSIF flag requests
ipmi_si: fix use-after-free of resource->name
Pull RAS updates from Borislav Petkov:
"This time around we have in store:
- Disable MC4_MISC thresholding banks on all AMD family 0x15 models
(Shirish S)
- AMD MCE error descriptions update and error decode improvements
(Yazen Ghannam)
- The usual smaller conversions and fixes"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Improve error message when kernel cannot recover, p2
EDAC/mce_amd: Decode MCA_STATUS in bit definition order
EDAC/mce_amd: Decode MCA_STATUS[Scrub] bit
EDAC, mce_amd: Print ExtErrorCode and description on a single line
EDAC, mce_amd: Match error descriptions to latest documentation
x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types
x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units
x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types
RAS: Add a MAINTAINERS entry
RAS: Use consistent types for UUIDs
x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk
x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models
x86/MCE: Switch to use the new generic UUID API
* New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)
* Altera SDRAM functionality carveout for separate enablement of RAS and
SDRAM capabilities on some Altera chips. (Thor Thayer)
* The usual round of cleanups and fixes
Last but not least:
* Recruit James Morse as a reviewer for the ARM side
-----BEGIN PGP SIGNATURE-----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=A1kA
-----END PGP SIGNATURE-----
Merge tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)
- New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)
- Altera SDRAM functionality carveout for separate enablement of RAS
and SDRAM capabilities on some Altera chips. (Thor Thayer)
- The usual round of cleanups and fixes
And last but not least: recruit James Morse as a reviewer for the ARM
side.
* tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC/altera: Add separate SDRAM EDAC config
EDAC, altera: Add missing of_node_put()
EDAC, skx_common: Add code to recognise new compound error code
EDAC, i10nm: Fix randconfig builds
EDAC, i10nm: Add a driver for Intel 10nm server processors
EDAC, skx_edac: Delete duplicated code
EDAC, skx_common: Separate common code out from skx_edac
EDAC: Do not check return value of debugfs_create() functions
EDAC: Add James Morse as a reviewer
dt-bindings, EDAC: Add Aspeed AST2500
EDAC, aspeed: Add an Aspeed AST2500 EDAC driver
Pull HID updates from Jiri Kosina:
- support for Pro Pen slim, from Jason Gerecke
- power management improvements to Intel-ISH driver, from Song Hongyan
- UCLogic driver revamp in order to be able to support wider range of
Huion tablets, from Nikolai Kondrashov
- Asus Transbook support, from NOGUCHI Hiroshi
- other assorted small bugfixes / cleanups and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
HID: Remove Waltop tablets from hid_have_special_driver
HID: Remove KYE tablets from hid_have_special_driver
HID: Remove hid-uclogic entries from hid_have_special_driver
HID: uclogic: Do not initialize non-USB devices
HID: uclogic: Add support for Ugee G5
HID: uclogic: Support Gray-coded rotary encoders
HID: uclogic: Support faking Wacom pad device ID
HID: uclogic: Add support for XP-Pen Deco 01
HID: uclogic: Add support for XP-Pen Star G640
HID: uclogic: Add support for XP-Pen Star G540
HID: uclogic: Add support for Ugee EX07S frame controls
HID: uclogic: Add support for Ugee M540
HID: uclogic: Add support for Ugee 2150
HID: uclogic: Support v2 protocol
HID: uclogic: Support fragmented high-res reports
HID: uclogic: Support in-range reporting emulation
HID: uclogic: Designate current protocol v1
HID: uclogic: Re-initialize tablets on resume
HID: uclogic: Extract tablet parameter discovery into a module
HID: uclogic: Extract report descriptors to a module
...
Pull livepatching updates from Jiri Kosina:
- support for something we call 'atomic replace', and allows for much
better handling of cumulative patches (which is something very useful
for distros), from Jason Baron with help of Petr Mladek and Joe
Lawrence
- improvement of handling of tasks blocking finalization, from Miroslav
Benes
- update of MAINTAINERS file to reflect move towards group
maintainership
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
livepatch/selftests: use "$@" to preserve argument list
livepatch: Module coming and going callbacks can proceed with all listed patches
livepatch: Proper error handling in the shadow variables selftest
livepatch: return -ENOMEM on ptr_id() allocation failure
livepatch: Introduce klp_for_each_patch macro
livepatch: core: Return EOPNOTSUPP instead of ENOSYS
selftests/livepatch: add DYNAMIC_DEBUG config dependency
livepatch: samples: non static warnings fix
livepatch: update MAINTAINERS
livepatch: Remove signal sysfs attribute
livepatch: Send a fake signal periodically
selftests/livepatch: introduce tests
livepatch: Remove ordering (stacking) of the livepatches
livepatch: Atomic replace and cumulative patches documentation
livepatch: Remove Nop structures when unused
livepatch: Add atomic replace
livepatch: Use lists to manage patches, objects and functions
livepatch: Simplify API by removing registration step
livepatch: Don't block the removal of patches loaded after a forced transition
livepatch: Consolidate klp_free functions
...
-----BEGIN PGP SIGNATURE-----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=GlRQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for the 5.1 merge window.
The big changes I'd highlight are:
- nouveau has HMM support now, there is finally an in-tree user so we
can quieten down the rip it out people.
- i915 now enables fastboot by default on Skylake+
- Displayport Multistream support has been refactored and should
hopefully be more reliable.
Core:
- header cleanups aiming towards removing drmP.h
- dma-buf fence seqnos to 64-bits
- common helper for DP mst hotplug for radeon,i915,amdgpu + new
refcounting scheme
- MST i2c improvements
- drm_syncobj_cb removal
- ARM FB compression fourcc
- P010 + P016 fourcc
- allwinner tiled format modifier
- i2c over aux I2C_M_STOP support
- DRM_AUTH handling fixes
TTM:
- ref/unref renaming
New driver:
- ARM komeda display driver
scheduler:
- refactor mirror list handling
- rework hw fence processing
- 0 run queue entity fix
bridge:
- TI DS90C185 LVDS bridge
- thc631lvdm83d bridge improvements
- cadence + allwinner DSI ported to generic phy
panels:
- Sitronix ST7701 panel
- Kingdisplay KD097D04
- LeMaker BL035-RGB-002
- PDA 91-00156-A0
- Innolux EE101IA-01D
i915:
- Enable fastboot by default on SKL+/VLV/CHV
- Export RPCS configuration for ICL media driver
- Coffelake PCI ID
- CNL clocks setup fixes
- ACPI/PMIC support for MIPI/DSI
- Per-engine WA init for all engines
- Shrinker locking fixes
- Kerneldoc updates
- Lots of ring improvements and reset fixes
- Coffeelake GVT Support
- VFIO GVT EDID Region support
- runtime PM wakeref tracking
- ILK->IVB primary plane enable delays
- userptr mutex locking fixes
- DSI fixes
- LVDS/TV cleanups
- HW readout fixes
- LUT robustness fixes
- ICL display and watermark fixes
- gem mmap race fix
amdgpu:
- add scheduled dependencies interface
- DCC on scanout surfaces
- vega10/20 BACO support
- Multiple IH rings on soc15
- XGMI locking fixes
- DC i2c/aux cleanups
- runtime SMU debug interface
- Kexec improvmeents
- SR-IOV fixes
- DC freesync + ABM fixes
- GDS fixes
- GPUVM fixes
- vega20 PCIE DPM switching fixes
- Context priority handling fixes
radeon:
- fix missing break in evergreen parser
nouveau:
- SVM support via HMM
msm:
- QCOM Compressed modifier support
exynos:
- s5pv210 rotator support
imx:
- zpos property support
- pending update fixes
v3d:
- cache flush improvments
vc4:
- reflection support
- HDMI overscan support
tegra:
- CEC refactoring
- HDMI audio fixes
- Tegra186 prep work
- SOR crossbar device tree fixes
sun4i:
- implicit fencing support
- YUV and scalar support improvements
- A23 support
- tiling fixes
atmel-hlcdc:
- clipping and rotation property fixes
qxl:
- BO and PRIME improvements
- generic fbdev emulation
dw-hdmi:
- HDMI 2.0 2160p
- YUV420 ouput
rockchip:
- implicit fencing support
- reflection proerties
virtio-gpu:
- use generic fbdev emulation
tilcdc:
- cpufreq vs crtc init fix
rcar-du:
- R8A774C0 support
- D3/E3 RGB output routing fixes and DPAD0 support
- RA87744 LVDS support
bochs:
- atomic and generic fbdev emulation
- ID mismatch error on bochs load
meson:
- remove firmware fbs"
* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
drm/amd/display: Use vrr friendly pageflip throttling in DC.
drm/imx: only send commit done event when all state has been applied
drm/imx: allow building under COMPILE_TEST
drm/imx: imx-tve: depend on COMMON_CLK
drm/imx: ipuv3-plane: add zpos property
drm/imx: ipuv3-plane: add function to query atomic update status
gpu: ipu-v3: prg: add function to get channel configure status
gpu: ipu-v3: pre: add double buffer status readback
drm/amdgpu: Bump amdgpu version for context priority override.
drm/amdgpu/powerplay: fix typo in BACO header guards
drm/amdgpu/powerplay: fix return codes in BACO code
drm/amdgpu: add missing license on baco files
drm/bochs: Fix the ID mismatch error
drm/nouveau/dmem: use dma addresses during migration copies
drm/nouveau/dmem: use physical vram addresses during migration copies
drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
drm/nouveau/dmem: device memory helpers for SVM
drm/nouveau/svm: initial support for shared virtual memory
drm/nouveau: prepare for enabling svm with existing userspace interfaces
...
Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock. It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name. As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.
Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.
Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Tony notes that the GPIO module does not idle when level interrupts are
in use, as the wakeup appears to get stuck.
After extensive investigation, it appears that the wakeup will only be
cleared if the interrupt status register is cleared while the interrupt
is enabled. However, we are currently clearing it with the interrupt
disabled for level-based interrupts.
It is acknowledged that this observed behaviour conflicts with a
statement in the TRM:
CAUTION
After servicing the interrupt, the status bit in the interrupt status
register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be
reset and the interrupt line released (by setting the corresponding
bit of the interrupt status register to 1) before enabling an
interrupt for the GPIO channel in the interrupt-enable register
(GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent
the occurrence of unexpected interrupts when enabling an interrupt
for the GPIO channel.
However, this does not appear to be a practical problem.
Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>,
the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP:
Fix the sequence to clear the IRQ status" saying:
if the status is cleared after disabling the IRQ then sWAKEUP will not
be cleared and gates the module transition
When we unmask the level interrupt after the interrupt has been handled,
enable the interrupt and only then clear the interrupt. If the interrupt
is still pending, the hardware will re-assert the interrupt status.
Should the caution note in the TRM prove to be a problem, we could
use a clear-enable-clear sequence instead.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: updated comments based on an earlier TI patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Current amd_fch_gpio_direction_output implementation ignores the value
argument, fix it so direction_output will set proper output level.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver was newly introduced but the version that got merged
produces a harmless compiler warning:
drivers/platform/x86/pcengines-apuv2.c: In function 'apu_board_init':
drivers/platform/x86/pcengines-apuv2.c:211:6: error: unused variable 'rc' [-Werror=unused-variable]
Remove the evidently useless variable.
Fixes: f8eb0235f6 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-By: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit 0cdf21b34e
("gpio: pca953x: set the PCA_PCAL flag also when matching by DT")
introduces a helper macro which tells that chip supports latched interrupts,
but the macro was never used for ACPI or legacy enumeration.
So, make use of it for legacy and ACPI enumeration.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge more updates from Andrew Morton:
- some of the rest of MM
- various misc things
- dynamic-debug updates
- checkpatch
- some epoll speedups
- autofs
- rapidio
- lib/, lib/lzo/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
samples/mic/mpssd/mpssd.h: remove duplicate header
kernel/fork.c: remove duplicated include
include/linux/relay.h: fix percpu annotation in struct rchan
arch/nios2/mm/fault.c: remove duplicate include
unicore32: stop printing the virtual memory layout
MAINTAINERS: fix GTA02 entry and mark as orphan
mm: create the new vm_fault_t type
arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()
arch: simplify several early memory allocations
openrisc: simplify pte_alloc_one_kernel()
sh: prefer memblock APIs returning virtual address
microblaze: prefer memblock API returning virtual address
powerpc: prefer memblock APIs returning virtual address
lib/lzo: separate lzo-rle from lzo
lib/lzo: implement run-length encoding
lib/lzo: fast 8-byte copy on arm64
lib/lzo: 64-bit CTZ on arm64
lib/lzo: tidy-up ifdefs
ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size
ipc: annotate implicit fall through
...
The percpu member of this structure is declared as:
struct ... ** __percpu member;
So its type is:
__percpu pointer to pointer to struct ...
But looking at how it's used, its type should be:
pointer to __percpu pointer to struct ...
and it should thus be declared as:
struct ... * __percpu *member;
So fix the placement of '__percpu' in the definition of this
structures.
This silents a few Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **
Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com
Fixes: 017c59c042 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove linux/ptrace.h which is included more than once
Link: http://lkml.kernel.org/r/5c45d345.1c69fb81.d90ed.8e05@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
the virtual memory layout printed during boot up contains "ptrval"
instead of actual addresses.
Instead of changing the printing to "%px", and leaking virtual memory
layout information again, just remove the printing completely, cfr.
e.g. commits 071929dbdd ("arm64: Stop printing the virtual memory
layout") and 31833332f7 ("m68k/mm: Stop printing the virtual memory
layout").
All interesting information (actual section sizes) is already printed by
mem_init_print_info() just above anyway.
Link: http://lkml.kernel.org/r/20190121152254.29079-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The entry for GTA02 never had paths listed; fix that. commit 9d76295ac6
("[ARM] GTA02/FreeRunner: Add machine definition"), which added the entry
for GTA02, created two new files named
arch/arm/mach-s3c2442/{include/mach/gta02.h,mach-gta02.c}, which were then
renamed in commit dd6f01b5cc ("ARM: S3C2440: move mach-s3c2440/* into
mach-s3c24xx/") to
arch/arm/mach-s3c24xx/{include/mach/gta02.h,mach-gta02.c}.
Also, the GTA02 maintainer's email address is from a domain that doesn't
have an MX record anymore and appears to have expired. Remove the
maintainer and mark the subsystem as orphan.
Link: http://lkml.kernel.org/r/20190215140444.37060-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Nelson Castillo <arhuaco@freaks-unidos.net>
Cc: Nelson Castillo <nelsoneci@gmail.com>
Cc: Andy Green <andy@warmcat.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page fault handlers are supposed to return VM_FAULT codes, but some
drivers/file systems mistakenly return error numbers. Now that all
drivers/file systems have been converted to use the vm_fault_t return
type, change the type definition to no longer be compatible with 'int'.
By making it an unsigned int, the function prototype becomes
incompatible with a function which returns int. Sparse will detect any
attempts to return a value which is not a VM_FAULT code.
VM_FAULT_SET_HINDEX and VM_FAULT_GET_HINDEX values are changed to avoid
conflict with other VM_FAULT codes.
[jrdr.linux@gmail.com: fix warnings]
Link: http://lkml.kernel.org/r/20190109183742.GA24326@jordon-HP-15-Notebook-PC
Link: http://lkml.kernel.org/r/20190108183041.GA12137@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, s390 and unicore32 use oneliner wrappers for memblock_alloc().
Replace their usage with direct call to memblock_alloc().
Link: http://lkml.kernel.org/r/1546248566-14910-7-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several early memory allocations in arch/ code that use
memblock_phys_alloc() to allocate memory, convert the returned physical
address to the virtual address and then set the allocated memory to
zero.
Exactly the same behaviour can be achieved simply by calling
memblock_alloc(): it allocates the memory in the same way as
memblock_phys_alloc(), then it performs the phys_to_virt() conversion
and clears the allocated memory.
Replace the longer sequence with a simpler call to memblock_alloc().
Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pte_alloc_one_kernel() function allocates a page using
__get_free_page(GFP_KERNEL) when mm initialization is complete and
memblock_phys_alloc() on the earlier stages. The physical address of
the page allocated with memblock_phys_alloc() is converted to the
virtual address and in the both cases the allocated page is cleared
using clear_page().
The code is simplified by replacing __get_free_page() with
get_zeroed_page() and by replacing memblock_phys_alloc() with
memblock_alloc().
Link: http://lkml.kernel.org/r/1546248566-14910-5-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than use the memblock_alloc_base that returns a physical address
and then convert this address to the virtual one, use appropriate
memblock function that returns a virtual address.
There is a small functional change in the allocation of then
NODE_DATA(). Instead of panicing if the local allocation failed, the
non-local allocation attempt will be made.
Link: http://lkml.kernel.org/r/1546248566-14910-4-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds