Hi all,
Beginning from commits close to v2.6.25-rc2, running lguest always oopses
the host kernel. Oops is at [1].
Bisection led to the following commit:
commit 37cc8d7f96
x86/early_ioremap: don't assume we're using swapper_pg_dir
At the early stages of boot, before the kernel pagetable has been
fully initialized, a Xen kernel will still be running off the
Xen-provided pagetables rather than swapper_pg_dir[]. Therefore,
readback cr3 to determine the base of the pagetable rather than
assuming swapper_pg_dir[].
static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
{
- pgd_t *pgd = &swapper_pg_dir[pgd_index(addr)];
+ /* Don't assume we're using swapper_pg_dir at this point */
+ pgd_t *base = __va(read_cr3());
+ pgd_t *pgd = &base[pgd_index(addr)];
pud_t *pud = pud_offset(pgd, addr);
pmd_t *pmd = pmd_offset(pud, addr);
Trying to analyze the problem, it seems on the guest side of lguest,
%cr3 has a different value from &swapper_pg-dir (which
is AFAIK fine on a pravirt guest):
Putting some debugging messages in early_ioremap_pmd:
/* Appears 3 times */
[ 0.000000] ***************************
[ 0.000000] __va(%cr3) = c0000000, &swapper_pg_dir = c02cc000
[ 0.000000] ***************************
After 8 hours of debugging and staring on lguest code, I noticed something
strange in paravirt_ops->set_pmd hypercall invocation:
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
*pmdp = pmdval;
lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
(__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
}
The first hcall parameter is global pgdir which looks fine. The second
parameter is the pmd index in the pgdir which is suspectful.
AFAIK, calculating the index of pmd does not need a divisoin over four.
Removing the division made lguest work fine again . Patch is at [2].
I am not sure why the division over four existed in the first place. It
seems bogus, maybe the Xen patch just made the problem appear ?
[2]: The patch:
[PATCH] lguest: fix pgdir pmd index cacluation
Remove an error in index calculation which leads to removing
a not existing shadow page table (leading to a Null dereference).
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Added a declaration to asm-x86/lguest.h and moved the extern arrays there
as well. As an alternative to including asm/lguest.h directly, an
include could be put in linux/lguest.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: "rusty@rustcorp.com.au" <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.
This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Commit e036eaa681 broke dreamcast pci, this
patch fixes that by reverting the dreamcast specific bits.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Fix the RTC resources setup for sh770x. Whit these proper
start values RTC driver (drivers/rtc/rtc-sh.c) works.
Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Avoids sparse warnings:
kernel/sched.c:2170:17: warning: symbol 'schedule_tail' was not declared. Should it be static?
Avoids the need for an external declaration in arch/um/process.c
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Without this, it's possible to have CONFIG_SUPERH32=y set on SH5-103
parts, which leads to much build badness.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
drivers/char/pcmcia/synclink_cs.c:284:1: warning: "CCR3" redefined
In file included from include/asm/cache.h:13,
from include/asm/processor_32.h:15,
from include/asm/processor.h:60,
from include/linux/prefetch.h:14,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/char/pcmcia/synclink_cs.c:38:
include/asm/cpu/cache.h:38:1: warning: this is the location of the previous definition
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Fix following warnings:
WARNING: vmlinux.o(.text+0x4f980): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem()
WARNING: vmlinux.o(.text+0x4f9cc): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem()
alloc_bootmem() is only used during early init and for any subsequent
call to kernel_map_range() the program logic avoid the call.
So annotate kernel_map_range() with __ref to tell modpost to
ignore the reference to a __init function.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following warnings:
WARNING: vmlinux.o(.text+0x4b258): Section mismatch in reference from the function dr_cpu_data() to the function .devinit.text:mdesc_fill_in_cpu_data()
WARNING: vmlinux.o(.text+0x4b290): Section mismatch in reference from the function dr_cpu_data() to the function .cpuinit.text:cpu_up()
mdesc_fill_in_cpu_data() is only used during early init and for
cpu hotplug so the __cpuinit annotation is the correct choice.
We have the call chain:
dr_cpu_data() => dr_cpu_configure() => mdesc_fill_in_cpu_data()
dr_cpu_data() is used only during early init and for cpu
hotplug. So annotating them all __cpuinit solves the
section mismatch and should be correct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
CC [M] arch/sparc/kernel/led.o
arch/sparc/kernel/led.c: In function 'led_blink':
arch/sparc/kernel/led.c:35: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:35: error: 'jiffies' undeclared (first use in
this function)
arch/sparc/kernel/led.c:35: error: (Each undeclared identifier is
reported only once
arch/sparc/kernel/led.c:35: error: for each function it appears in.)
arch/sparc/kernel/led.c:36: error: 'avenrun' undeclared (first use in
this function)
arch/sparc/kernel/led.c:36: error: 'FSHIFT' undeclared (first use in
this function)
arch/sparc/kernel/led.c:36: error: 'HZ' undeclared (first use in this
function)
arch/sparc/kernel/led.c:37: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:39: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:40: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:42: error: implicit declaration of function
'add_timer'
arch/sparc/kernel/led.c: In function 'led_write_proc':
arch/sparc/kernel/led.c:70: error: implicit declaration of function
'copy_from_user'
arch/sparc/kernel/led.c:84: error: implicit declaration of function
'del_timer_sync'
arch/sparc/kernel/led.c: In function 'led_init':
arch/sparc/kernel/led.c:109: error: implicit declaration of function
'init_timer'
arch/sparc/kernel/led.c:110: error: invalid use of undefined type
'struct timer_list'
make[1]: *** [arch/sparc/kernel/led.o] Error 1
Based upon original patch by Robert Reif.
Signed-off-by: David S. Miller <davem@davemloft.net>
Each call to i2c_get_adapter() must be followed by a call to
i2c_put_adapter() to release the grabbed reference. Otherwise the
reference count grows forever and the adapter can never be
unregistered.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Vladimir Ananiev <vovan888@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
mpc52xx_set_psc_clkdiv is needed by PSC device drivers.
Signed-off-by: Eric Dujardin <eric.dujardin@sagem.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Commit ee3d9bd4de ("uml: simplify SIGSEGV
handling"), while greatly simplifying the kernel SIGSEGV handler that
runs in the process address space, introduced a bug which corrupts FP
state in the process.
Previously, the SIGSEGV handler called the sigreturn system call by hand - it
couldn't return through the restorer provided to it because that could try to
call the libc restorer which likely wouldn't exist in the process address
space. So, it blocked off some signals, including SIGUSR1, on entry to the
SIGSEGV handler, queued a SIGUSR1 to itself, and invoked sigreturn. The
SIGUSR1 was delivered, and was visible to the UML kernel after sigreturn
finished.
The commit eliminated the signal masking and the call to sigreturn. The
handler simply hits itself with a SIGTRAP to let the UML kernel know that it
is finished. UML then restores the process registers, which effectively
longjmps the process out of the signal handler, skipping sigreturn's restoring
of register state and the signal mask.
The bug is that the host apparently sets used_fp to 0 when it saves the
process FP state in the sigcontext on the process signal stack. Thus, when
the process is longjmped out of the handler, its FP state is corrupt because
it wasn't saved on the context switch to the UML kernel.
This manifested itself as sleep hanging. For some reason, sleep uses floating
point in order to calculate the sleep interval. When a page fault corrupts
its FP state, it is faked into essentially sleeping forever.
This patch saves the FP state before entering the SIGSEGV handler and restores
it afterwards.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 1aa351a308 ("uml: tidy helper
code") the arguments of helper_wait() were changed. The adaptation of
harddog_user.c was forgotten, so this errors occur:
/arch/um/drivers/harddog_user.c: In function 'start_watchdog':
/arch/um/drivers/harddog_user.c:82: error: too many arguments to function 'helper_wait'
/arch/um/drivers/harddog_user.c:89: error: too many arguments to function 'helper_wait'
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The macros which extract registers from a struct sigcontext are no longer
needed and can be removed. They are starting not to build anyway, given the
removal of the 'e' and 'r' from register names during the x86 merge.
Cc: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Define HZ as a config option.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a shadowed variable in arch/um/kernel/mem.c, since there is a global
variable has the same name.
Cc: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update defconfig.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the initrd file has zero-length, the error message should contain
the filepath.
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's always been broken, but recent fixes actually made it do something,
and now the brokenness shows up as the resulting kernel simply not
working at all.
So it used to be that you could enable this config option, and it just
didn't do anything. Now we'd better stop people from enabling it by
mistake, since it _does_ do something, but does it so badly as to be
unusable.
Code to actually make it work is pending, but incomplete and won't be
merged into 2.6.25 in any case.
Acked-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simple typo fix for regression introduced by the user_regset changes.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6:
PCI: Fix wrong reference counter check for proc_dir_entry
PCI: fix up setup-bus.c #ifdef
PCI: don't load acpi_php when acpi is disabled
PCI: quirks: set 'En' bit of MSI Mapping for devices onHT-based nvidia platform
PCI: kernel-doc: fix pci-acpi warning
PCI: irq: patch for Intel ICH10 DeviceID's
PCI: pci_ids: patch for Intel ICH10 DeviceID's
PCI: AMD SATA IDE mode quirk
PCI: drivers/pcmcia/i82092.c: fix up after pci_bus_region changes
PCI: hotplug: acpiphp_ibm: Remove get device information
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4835/1: Fix stale comment in struct machine_desc description
[ARM] 4829/1: add .get method to pxa-cpufreq to silence a warning
[ARM] 4828/1: fix 3 warnings in drivers/video/pxafb.c
[ARM] 4827/1: fix two warnings in drivers/i2c/busses/i2c-pxa.c
[ARM] 4826/1: Orion: Register the RTC interrupt on the TS-209
[ARM] pxa: fix clock lookup to find specific device clocks
Remove warning:
arch/powerpc/sysdev/mpic_pasemi_msi.c: In function 'pasemi_msi_setup_msi_irqs':
arch/powerpc/sysdev/mpic_pasemi_msi.c:135: warning: 'addr' is used uninitialized in this function
Turns out addr wasn't even used, it's a leftover from the u3msi code.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Setup i2c_board_info based on device tree contents. This has to be
a device_initcall since we need PCI to be probed by the time we
run it, but before the actual driver is initialized.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Make hibernation work with CONFIG_DEBUG_PAGEALLOC set on x86, by
checking if the pages to be copied are marked as present in the
kernel mapping and temporarily marking them as present if that's not
the case. No functional modifications are introduced if
CONFIG_DEBUG_PAGEALLOC is unset.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Change the FRV timerfd syscalls to be the same as i386 timerfd syscalls.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no .data.idt section for FRV, so drop it from the linker script.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/sparc64/kernel/process.c:504:17: warning: symbol 'sparc_do_fork' was not declared. Should it be static?
arch/sparc64/kernel/process.c:655:5: warning: symbol 'dump_fpu' was not declared. Should it be static?
arch/sparc64/kernel/process.c:708:16: warning: symbol 'sparc_execve' was not declared. Should it be static?
Signed-off-by: David S. Miller <davem@davemloft.net>
arch/sparc64/kernel/process.c:219:6: warning: symbol '__show_regs' was not declared. Should it be static?
Signed-off-by: David S. Miller <davem@davemloft.net>
Noticed via sparse:
arch/sparc64/kernel/process.c:215:6: warning: symbol 'show_stackframe' was not declared. Should it be static?
arch/sparc64/kernel/process.c:243:6: warning: symbol 'show_stackframe32' was not declared. Should it be static?
It is totally unused.
Signed-off-by: David S. Miller <davem@davemloft.net>
arch/sparc64/kernel/process.c:123:6: warning: symbol 'machine_alt_power_off' was not declared. Should it be static?
Signed-off-by: David S. Miller <davem@davemloft.net>
At present, the __spufs_trap_data_map and __spu_trap_data_seq functions
exit if spu->flags has the SPU_CONTEXT_SWITCH_ACTIVE set. This was
resulting in suprious returns from these functions, as they may be
legitimately called when we have this bit set.
We only use it in these two sanity checks, so this change removes the
flag completely. This fixes hangs in the page-fault path of SPE apps.
Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Introduced by commit 79393fc46e
("kobject: convert pseries/power.c to kobj_attr interface").
sys_create_file takes a "struct attrbute *" not a "struct
kobj_addribute *".
arch/powerpc/platforms/pseries/power.c: In function 'apo_pm_init':
arch/powerpc/platforms/pseries/power.c:78: warning: passing argument 2 of 'sysfs_create_file' from incompatible pointer type
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
GCC versions before 3.4 did not support the -mcpu=440 option. Use
-mcpu=405 for the 4xx specific bootwrapper files, as that has been
around for much longer.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
dt_mem_next_cell() currently does of_read_ulong(). This does not
allow for the case where #size-cells and/or #address-cells = 2 on a
32-bit system, as it will end up reading 32 bits instead of the
expected 64. Change it to use of_read_number instead and always
return a u64.
Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Fix sparse warnings in powerpc kprobes:
CHECK arch/powerpc/kernel/kprobes.c
arch/powerpc/kernel/kprobes.c:277:6: warning: symbol 'kretprobe_trampoline_holder' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:287:15: warning: symbol 'trampoline_probe_handler' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:525:16: warning: symbol 'jprobe_return_end' was not declared. Should it be static?
Fix along the same lines as http://lkml.org/lkml/2008/2/13/642
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
agp: fix missing casts that produced a warning.
agp: add support for 662/671 to agp driver
fix historic ioremap() abuse in AGP
agp/sis: Suspend support for SiS AGP
agp/sis: Clear bit 2 from aperture size byte as well
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits)
x86: fix page_is_ram() thinko
x86: fix WARN_ON() message: teach page_is_ram() about the special 4Kb bios data page
x86: i8259A: remove redundant irq_descinitialization
x86: fix vdso_install breaks user "make install"
x86: change IO delay back to 0x80
x86: lds - Use THREAD_SIZE instead of numeric constant
x86: lds - Use PAGE_SIZE instead of numeric constant
x86 cleanup: suspend_asm_64.S - use X86_CR4_PGE instead of numeric value
x86: docs fixes to Documentation/i386/IO-APIC.txt
x86: fix printout ugliness in cpu info printk
x86: clean up csum-wrappers_64.c some more
x86: coding style fixes in arch/x86/lib/csum-wrappers_64.c
x86: coding style fixes in arch/x86/lib/io_64.c
x86: exclude vsyscall files from stackprotect
x86: add pgd_large() on 64-bit, for consistency
x86: minor cleanup of comments in processor.h
x86: annotate pci/common.s:pci_scan_bus_with_sysdata with __devinit
x86: fix section mismatch in head_64.S:initial_code
x86: fix section mismatch in srat_64.c:reserve_hotadd
x86: fix section mismatch warning in topology.c:arch_register_cpu
...
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: (29 commits)
[XTENSA] Allow debugger to modify the WINDOWBASE register.
[XTENSA] Fix makefile to work with binutils-2.18.
[XTENSA] Fix register corruption for certain processor configurations
[XTENSA] Fix cache flush macro for D$/I$ aliasing/non-aliasing
[XTENSA] Exclude thread-global registers from the xtregs structures.
[XTENSA] Add support for the sa_restorer function
[XTENSA] Add support for configurable registers and coprocessors
[XTENSA] Clean up stat structs.
[XTENSA] Use preprocessor to generate the linker script for the ELF boot image
[XTENSA] Add missing RELOCATE_ENTRY for debug vector
[XTENSA] Add volatile keyword to asm statements accessing counter registers
[XTENSA] Remove unused code
[XTENSA] Fix modules for non-exec processor configurations
[XTENSA] Add missing cast in elf.h ELF_CORE_COPY_REGS()
[XTENSA] Fix comments regarding the number of frames to save
[XTENSA] Add missing a2 register restore in register spill routine
[XTENSA] adjust boot linker script start addresses
[XTENSA] Remove oldmask from sigcontext and fix register flush
[XTENSA] Clean up elf-gregset.
[XTENSA] Fix icache flush for cache aliasing
...
Make the kernel jump into gdbstub (if configured) on a BUG with the register
set from the BUG rather than interpolating another illegal instruction and
leaving gdbstub's idea of the process counter in unsupported_syscall() where
the original BUG was detected.
With this patch, gdbstub reports a SIGABRT to the compiler and reports the
program counter at the original BUG, allowing the execution state at the time
of the BUG to be examined with GDB.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce into the MN10300 gdbstub a couple of barrier() calls to replace the
removed volatility of the input/output index variables for the Rx ring buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call update_process_times() outside of the xtime_lock. Somewhere somewhere
inside one of the functions called by that, xtime_lock is readlocked, which
ends up in a deadlock situation.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch the BCM47XX code to the new SPROM data structure now that the old
one has been removed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS version of pcibios_enalbe_resources did not have the fixes
from ed6d14f976 yet which under circumstances
similar to x86 might result in failures.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Two files were omitted from the recent removal of the qemu platform.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch enables the system calls timerfd_create(), timerfd_settime()
and timerfd_gettime() for MIPS architecture.
Please see the following Bugzilla entry for more details:
http://bugzilla.kernel.org/show_bug.cgi?id=10038
This was tested using a Malta 4Kc board in both little-endian and
big-endian modes. The unit test program is available from the URL
above.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
[Ralf: Added N64, N32 and O32 bits on 64-bit kernels.]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix type mismatch warnings for 64-bit kernel builds which trigger -Werror.
The problem affects only SB-1 kernels with CONFIG_SIBYTE_DMA_PAGEOPS
enabled.
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
kmap_coherent will only work correctly if the page it is called on is
not marked dirty. If it's dirty the kernel address of the page should
be used instead of a temporary mapping.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Properly acknowledge RM7K and RM9K interrupts. Before this, interrupts were
permanently masked after their first occurrence, making them non-functional.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
So far flush_cache_range() did't consider the I-cache largely because it
did rarely ever matter to real world code. This was working primarily
because normally code and data are don't share the same pages - with the
exception of MIPS16 code which uses address constants embedded between
the code. The following sequence of events may break the code:
o MIPS16 executable being loaded
o dynamic linker relocates the address constants embedded into the code:
o Uses mprotect(2) to make code pages PROT_READ|PROT_WRITE
o Performs the actual relocations by writing to the pages which likely
are COW. Because no PROT_EXEC is set I-cache coherence will not be
considered.
o Uses mprotect(2) to switch code pages back to PROT_READ|PROT_EXEC.
This results in a call to flush_cache_range() which also does not
consider I-caches.
o => executing the page just having been relocated may now result in the
I-cache getting refilled with stale data from memory.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There are some places left in mips, that lookup task in initial namespace,
while the code doing so gets the pid from the user space and thus must
treat it as virtual.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] qdio: FCP/SCSI write I/O stagnates on LPAR
[S390] Fix futex_atomic_cmpxchg_std inline assembly.
[S390] dcss: Fix Unlikely(x) != y
[S390] sclp: clean up send/receive naming scheme
[S390] etr: fix compile error on !SMP
[S390] qdio: fix qdio_activate timeout handling.
[S390] Initialize per cpu lowcores on cpu hotplug.
[S390] find bit corner case.
[S390] dasd: fix locking in __dasd_device_process_final_queue
[S390] Make sure enabled wait psw is loaded in default_idle.
[S390] Let NR_CPUS default to 32/64 on s390/s390x.
[S390] cio: Do timed recovery on workqueue.
[S390] cio: Remember to initialize recovery_lock.
page_is_ram() has a special case for the 640k-1M bios area, however
due to a thinko the special case checks the e820 table entry and
not the memory the user has asked for. This patch fixes the bug.
[ mingo@elte.hu: this too is better solved in the e820 space, but those
fixes are too intrusive for v2.6.25. ]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch teaches page_is_ram() about the fact that the first
4Kb of memory are special on x86, even though the E820 table
normally doesn't exclude it.
This fixes the WARN_ON() reported by Laurent Riffard who was also
very helpful in diagnosing the issue.
[ mingo@elte.hu: we are working on doing this properly in the e820
space, but for 2.6.25 this is the better fix. ]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove redundant irq_desc[NR_IRQS] element initialization in
init_ISA_irqs(). irq_desc[NR_IRQS] is already statically
initialized with the same values in kernel/irq/handle.c .
besides the clean-up value this also saves some space:
text data bss dec hex filename
1389 356 14 1759 6df i8259_32.o.before
1325 356 14 1695 69f i8259_32.o.after
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I suggest to make the vdso_install step independent as
in following patch.
This solves the issue at ahnd and still gives us the posibility
to install the files should they be needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
change back the IO delay to 0x80.
Alan says that 0xed is known to break some older boxes, and given that
the get-rid-of-outb-APIs efforts are well underway we should just let
them be finished.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Though we use PDA for regular task stack but that
is not acceptable for init_task wich is special
one. We still have to allocate init_task's stack
in that manner.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It's much better to use PAGE_SIZE then magic 4096
(though it's almost synonym in most cases on x86 but
not for *all* cases ;)
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
By including <asm/processor-flags.h> we're allowed to use
X86_CR4_PGE instead of numeric constant.
md5 sums of compiled files are differ due to this inclusion
but .text section remains the same.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This simple patch makes the file error free (according to
checkpatch.pl)
no code changed:
arch/x86/lib/io_64.o:
text data bss dec hex filename
308 0 0 308 134 io_64.o.before
308 0 0 308 134 io_64.o.after
md5:
3c64f9ed83d091678e849b36ca27bee3 io_64.o.before.asm
3c64f9ed83d091678e849b36ca27bee3 io_64.o.after.asm
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
initial_code are initially used to hold a function pointer
from __init and later from __cpuinit. This confuses modpost
and changing initial_code to REFDATA silence the warning.
(But now we do not discard the variable anymore).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
reserve_hotadd() are only used by __init acpi_numa_memory_affinity_init().
Annotate reserve_hotadd() with __init is the trivial fix.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch_register_cpu() is only defined for HOTPLUG_CPU code
so simple fix is to ignore references by annotating the
function __ref.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
srat_detect_node() is only used by __cpuinit init_intel().
So the trivial fix is to annotate srat_detect_node() with __cpuinit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
nearby_node() were only used by __cpuinit amd_detect_cmp()
So annotating nearby_node() __cpuinit was the trivial fix.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch/x86/kernel/nmi_64.c:50: warning: 'unknown_nmi_panic_callback' declared 'static' but never defined
This patch also fixes nmi_32.c
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
New implementation does not use lru for anything so there is no need
to reject pages that are in the LRU. Similar for compound pages (which
were checked because they also use page->lru)
[ tglx@linutronix.de: removed unused variable ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Yes, it should.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch/x86/kernel/efi_32.c:42:6: warning: symbol 'efi_call_phys_prelog' was not declared. Should it be static?
arch/x86/kernel/efi_32.c:84:6: warning: symbol 'efi_call_phys_epilog' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch/x86/kernel/kprobes.c:584:16: warning: symbol 'kretprobe_trampoline_holder' was not declared. Should it be static?
arch/x86/kernel/kprobes.c:676:6: warning: symbol 'trampoline_handler' was not declared. Should it be static?
Make them static and add the __used attribute, approach taken from the
arm kprobes implementation.
kretprobe_trampoline_holder uses inline assemly to define the global
symbol kretprobe_trampoline, but nothing ever calls the holder explicitly.
trampoline handler is only called from inline assembly in the same file,
mark it used and static.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the mca-pentium boot option that was a noop.
besides the source code cleanup factor, this saves some text as well:
arch/x86/kernel/cpu/bugs.o:
text data bss dec hex filename
651 77 4 732 2dc bugs.o.before
631 53 4 688 2b0 bugs.o.after
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add missing exception table entry so that the kernel can handle
proctection exceptions as well on the cs instruction. Currently only
specification exceptions are handled correctly.
The missing entry allows user space to crash the kernel.
Cc: stable <stable@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since a5fbb6d106
"KVM: fix !SMP build error" smp_call_function isn't a define anymore
that folds into nothing but a define that calls up_smp_call_function
with all parameters. Hence we cannot #ifdef out the unused code
anymore...
This seems to be the preferred method, so do this for s390 as well.
arch/s390/kernel/time.c: In function 'etr_sync_clock':
arch/s390/kernel/time.c:825: error: 'clock_sync_cpu_start' undeclared
arch/s390/kernel/time.c:862: error: 'clock_sync_cpu_end' undeclared
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Just copy the first 512 read-only bytes of the current cpu lowcore if
a new cpu gets onlined. The rest is zeroed out and must be explicitly
initialized. Current code just copies the entire lowcore and
initializes the needed fields.
This should reveal bugs in future enhancements quite early.
Also when the lowcore of the first cpu is replaced this is now done
atomically (no interrupts, no machine checks).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If both NO_IDLE_HZ and VIRT_TIMER are disabled default_idle won't load
an enabled wait psw and busy loop instead. This is because the
idle_chain is empty and the return value of atomic_notifier_call_chain
will be NOTIFY_DONE, which causes default_idle to return instead of
loading an enabled wait psw.
Fix this by calling __atomic_notifier_call_chain instead and add proper
return value handling.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Several AGP drivers right now use ioremap_nocache() on kernel ram in order
to turn a page of regular memory uncached.
There are two problems with this:
1) This is a total nightmare for the ioremap() implementation to keep
various mappings of the same page coherent.
2) It's a total nightmare for the AGP code since it adds a ton of
complexity in terms of keeping track of 2 different pointers to
the same thing, in terms of error handling etc etc.
This patch fixes this by making the AGP drivers use the new
set_memory_XX APIs instead.
Note: amd-k7-agp.c is built on Alpha too, and generic.c is built
on ia64 as well, which do not yet have the set_memory_*() APIs,
so for them some we have a few ugly #ifdefs - hopefully they'll
be fixed soon.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Airlie <airlied@linux.ie>
And also it's helper function pci_is_controller(). Both
are unused.
I can't remove the equivalent from sparc32 yet as some
ancient bus probing code still uses that platform's version.
Signed-off-by: David S. Miller <davem@davemloft.net>
The idea of this thing is we could save/restore the firmware's
palette when breaking in and out of the firmware prompt.
Only one driver implemented this (atyfb) and it's value is
questionable. If you're just debugging you don't really
care that the characters end up being purple or whatever.
And we can provide better debugging and firmware command
facilities with minimal in-kernel console I/O drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>
2.6.25 has a regression where we can starve the scheduler by creating
(N_SPES+1) contexts, then running them one at a time.
The final context will never be run, as the other contexts are loaded on
the SPEs, none of which are repoted as free (ie, spu->alloc_state !=
SPU_FREE), so spu_get_idle() doesn't give us a spu to run on. Because
all of the contexts are stopped, none are descheduled by the scheduler
tick, as spusched_tick returns if spu_stopped(ctx).
This change replaces the spu_stopped() check with checking for SCHED_IDLE
in ctx->policy. We set a context's policy to SCHED_IDLE when we're not
in spu_run(). We also favour SCHED_IDLE contexts when looking for contexts
to unbind, but leave their timeslice intact for later resumption.
This patch fixes the following test in the spufs-testsuite:
tests/20-scheduler/02-yield-starvation
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
drivers/lguest/x86/switcher_32.S:(.text+0x3815f8):
undefined reference to `LGUEST_PAGES_regs_trapnum'
This problem was caused by asm-offsets.c only having the offsets when
lguest *guest* support was set, not lguest host (host support used to
imply guest support, so now they're separate these bugs come out).
Lguest guest support and host support are separate config options:
they used to be tied together. Sort out which parts of asm-offsets are
needed for Guest and Host.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the CPA code is called with an virtual address in the range of
the direct mapping or the high alias then we do not need to run
through the alias check for this range.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
NX settings are not required to be consistent across alias mappings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting
from __START_KERNEL_map. The kernel itself only needs _text to _end
mapped in the high alias. On relocatible kernels the ASM setup code
adjusts the compile time created high mappings to the relocation. This
creates invalid pmd entries for negative offsets:
0xffffffff80000000 -> pmd entry: ffffffffff2001e3
It points outside of the physical address space and is marked present.
This starts at the virtual address __START_KERNEL_map and goes up to
the point where the first valid physical address (0x0) is mapped.
Zap the mappings before _text and after _end right away in early
boot. This removes also the invalid entries.
Furthermore it simplifies the range check for high aliases.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
c_p_a() did not discover all aliases correctly. (such as when called
on vmalloc()-ed areas or ioremap()-ed areas)
Push the alias checks to the lower, physical level and consistently
discover all aliases that might exist: the low direct mappings and
the high linear kernel-text mappings (on 64-bit).
Thanks to Andi Kleen for pointing out that this was buggy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The functions time_before, time_before_eq, time_after, and
time_after_eq are more robust for comparing jiffies against other
values.
So following patch implements usage of the time_after() macro, defined
at linux/jiffies.h, which deals with wrapping correctly
Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: David S. Miller <davem@davemloft.net>
This gives better heuristics for the cost of a multiply (fixed
5 cycles), rather than the 'ultrasparc' setting (variable, and
unpredictable if the second argument is non-constant).
Example code size savings:
text data bss dec hex filename
3823690 304040 448880 4576610 45d562 vmlinux
3824521 304040 448880 4577441 45d8a1 vmlinux.orig
Signed-off-by: David S. Miller <davem@davemloft.net>
The .get method is needed for suspend/resume. Otherwise you
get this in dmesg:
cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
cpufreq: resume failed to assert current frequency is what timing core thinks it is.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The QNAP TS-209 has its RTC interrupt on GPIO 3. Setup this
as an interrupt and pass it to the i2c_board_info.
Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ensure that the clock lookup always finds an entry for a specific
device and ID before it falls back to finding just by ID. This
fixes a problem reported by Holger Schurig where the BTUART was
assigned the wrong clock.
Tested-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add a multiboard defconfig for PowerPC 44x now that the wrapper can create
the proper zImages for multiple boards.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Remove all "i2c" and "xxmii-interface" (rgmii etc) device_type entries
from the 4xx dts files.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Corrected IRQ triggering and level settings according to latest revision
of the 440EP User Manual (rev 1.24 nov 16, 2007).
The incorrect settings might cause a failure of the network if both
onchip ethernet ports are under heavy load.
Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This fixes a hang on boot with nohz enabled. nohz is not actually
supported in mainline yet, but patches that add support for it are
currently under review.
When nohz is compiled out, the functions are no-ops, so this patch
results in no functional change, but it arguably makes the code more
correct.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: DMI: quirk for FSC ESPRIMO Mobile V5505
ACPI: DMI blacklist updates
pnpacpi: __initdata is not an identifier
ACPI: static acpi_chain_head
ACPI: static acpi_find_dsdt_initrd()
ACPI: static acpi_no_initrd_override_setup()
thinkpad_acpi: static
ACPI suspend: Execute _WAK with the right argument
cpuidle: Add Documentation
ACPI, cpuidle: Clarify C-state description in sysfs
ACPI: fix suspend regression due to idle update
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (46 commits)
sh: Fix multiple UTLB hit on UP SH-4.
sh: fix pci io access for r2d boards
sh: fix ioreadN_rep and iowriteN_rep
sh: use ctrl_in/out for on chip pci access
sh: Kill off more dead symbols.
sh: __uncached_start only on sh32.
sh: asm/irq.h needs asm/cpu/irq.h.
serial: sh-sci: Fix up SH-5 build.
sh: Get SH-5 caches working again post-unification.
maple: Fix up maple build failure.
sh: Kill off bogus SH_SDK7780_STANDALONE symbol.
sh: asm/tlb.h needs linux/pagemap.h for CONFIG_SWAP=n.
sh: Tidy include/asm-sh/hp6xx.h
maple: improve detection of attached peripherals
sh: Shut up some trivial build warnings.
sh: Update SH-5 flush_cache_sigtramp() for API changes.
sh: Fix up set_fixmap_nocache() for SH-5.
sh: Fix up pte_mkhuge() build breakage for SH-5.
sh: Disable big endian for SH-5.
sh: Handle SH7366 CPU in check_bugs().
...
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
x86: cpa, fix out of date comment
KVM is not seen under X86 config with latest git (32 bit compile)
x86: cpa: ensure page alignment
x86: include proper prototypes for rodata_test
x86: fix gart_iommu_init()
x86: EFI set_memory_x()/set_memory_uc() fixes
x86: make dump_pagetable() static
x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr()
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Remove unused CONFIG_WANT_DEVICE_TREE
[POWERPC] Cell RAS: Remove DEBUG, and add license and copyright
[POWERPC] hvc_rtas_init() must be __init
[POWERPC] free_property() must not be __init
[POWERPC] vdso_do_func_patch{32,64}() must be __init
[POWERPC] Remove generated files on make clean
[POWERPC] Fix arch/ppc compilation - add typedef for pgtable_t
[POWERPC] Wire up new timerfd syscalls
[POWERPC] PS3: Update sys-manager button events
[POWERPC] PS3: Sys-manager code cleanup
[POWERPC] PS3: Use system reboot on restart
[POWERPC] PS3: Fix bootwrapper hang bug
[POWERPC] PS3: Fix reading pm interval in logical performance monitor
[POWERPC] PS3: Fix setting bookmark in logical performance monitor
[POWERPC] Fix DEBUG_PREEMPT warning when warning
d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to
reflect this.
[akpm@linux-foundation.org: fix build in mm/memory.c]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_dcookie() is always called with a dentry and a vfsmount from a struct
path. Make get_dcookie() take it directly as an argument.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I was looking at timers in the Coldfire system and I noticed that the
CONFIG_HIGHPROFILE option seems to be a little out of date.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify the extra asm flags for debugger capabilities, use asflags instead for
EXTRA_AFLAGS. Suggestion from Sam Ravnborg.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove bogus conditional jump in return from interrupt path. Reorder the code
path now that is not there.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
