pnv_eeh_reset() has special handling for PEs whose primary bus is the
root bus or the bus immediately underneath the root port.
The cxl bi-modal card support added in b0b5e5918a ("cxl: Add
cxl_check_and_switch_mode() API to switch bi-modal cards") relies on
this behaviour when hot-resetting the CAPI adapter following a mode
switch. Document this in pnv_eeh_reset() so we don't accidentally break
it.
Suggested-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove unnecessary tags in eeh_handle_normal_event(), and add function
comments for eeh_handle_normal_event() and eeh_handle_special_event().
The only functional difference is that in the case of a PE reaching the
maximum number of failures, rather than one message telling you of this
and suggesting you reseat the device, there are two separate messages.
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
eeh_handle_special_event() is called when an EEH event is detected but
can't be narrowed down to a specific PE. This function looks through
every PE to find one in an erroneous state, then calls the regular event
handler eeh_handle_normal_event() once it knows which PE has an error.
However, if eeh_handle_normal_event() found that the PE cannot possibly
be recovered, it will free it, rendering the passed PE stale.
This leads to a use after free in eeh_handle_special_event() as it attempts to
clear the "recovering" state on the PE after eeh_handle_normal_event() returns.
Thus, make sure the PE is valid when attempting to clear state in
eeh_handle_special_event().
Fixes: 8a6b1bc70d ("powerpc/eeh: EEH core to handle special event")
Cc: stable@vger.kernel.org # v3.11+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In some situations, a faulty AFU slice may create an interrupt storm of
slice errors, rendering the machine unusable. Since these interrupts are
informational only, present the interrupt once, then mask it off to
prevent it from being retriggered until the AFU is reset.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix a boundary condition where in some cases an eeh event that results
in card reset isn't passed on to a driver attached to the virtual PCI
device associated with a slice. This will happen in case when a slice
attached device driver returns a value other than
PCI_ERS_RESULT_NEED_RESET from the eeh error_detected() callback. This
would result in an early return from cxl_pci_error_detected() and
other drivers attached to other AFUs on the card wont be notified.
The patch fixes this by making sure that all slice attached
device-drivers are notified and the return values from
error_detected() callback are aggregated in a scheme where request for
'disconnect' trumps all and 'none' trumps 'need_reset'.
Fixes: 9e8df8a219 ("cxl: EEH support")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During an eeh event when the cxl card is fenced and card sysfs attr
perst_reloads_same_image is set following warning message is seen in the
kernel logs:
Adapter context unlocked with 0 active contexts
------------[ cut here ]------------
WARNING: CPU: 12 PID: 627 at
../drivers/misc/cxl/main.c:325 cxl_adapter_context_unlock+0x60/0x80 [cxl]
Even though this warning is harmless, it clutters the kernel log
during an eeh event. This warning is triggered as the EEH callback
cxl_pci_error_detected doesn't obtain a context-lock before forcibly
detaching all active context and when context-lock is released during
call to cxl_configure_adapter from cxl_pci_slot_reset, a warning in
cxl_adapter_context_unlock is triggered.
To fix this warning, we acquire the adapter context-lock via
cxl_adapter_context_lock() in the eeh callback
cxl_pci_error_detected() once all the virtual AFU PHBs are notified
and their contexts detached. The context-lock is released in
cxl_pci_slot_reset() after the adapter is successfully reconfigured
and before the we call the slot_reset callback on slice attached
device-drivers.
Fixes: 70b565bbdb ("cxl: Prevent adapter reset if an active context exists")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Tested-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This was a hack we added to work around the allmodconfig build breaking, see
commit fb43e8477e ("powerpc: Disable RELOCATABLE for COMPILE_TEST with
PPC64").
Since we merged the thin archives support in commit 43c9127d94 ("powerpc: Add
option to use thin archives") this hasn't been necessary, so remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a
print which assumes SLB problems. With radix, these vectors have different
meanings.
This patch updates the oops message to reflect these different meanings.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michal Suchánek noticed a comment in book3s/64/mmu-hash.h about the context ids
we use for the kernel was inconsistent with the code and other comments in the
same file.
It should read 1-4 not 1-5.
While we're touching it, update "address" to "addresses" which makes more sense
as it's referring to more than one address below.
Reported-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This enables VFIO on pseries host in order to allow VFIO in nested guest under
PR KVM or DPDK in a HV guest. This adds support of the VFIO_SPAPR_TCE_IOMMU
type.
This adds exchange() callback to allow TCE updates by the SPAPR TCE IOMMU
driver in VFIO.
This initializes DMA32 window parameters in iommu_table_group as as this does
not implement VFIO_SPAPR_TCE_v2_IOMMU and VFIO_SPAPR_TCE_IOMMU just reuses the
existing DMA32 window.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the userspace requests a small TCE table (which takes less than
the system page size) and more than 1 TCE level, the existing code
returns a single page size which is a bug as each additional TCE level
requires at least one page and this is what
pnv_pci_ioda2_table_alloc_pages() does. And we end up seeing
WARN_ON(!ret && ((*ptbl)->it_allocated_size != table_size))
in drivers/vfio/vfio_iommu_spapr_tce.c.
This replaces incorrect _ALIGN_UP() (which aligns zero up to zero) with
max_t() to fix the bug.
Besides removing WARN_ON(), there should be no other changes in
behaviour.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pnv_pci_table_alloc() ignores possible failure from kzalloc_node(),
this adds a check. There are 2 callers of pnv_pci_table_alloc(),
one already checks for tbl!=NULL, this adds WARN_ON() to the other path
which only happens during boot time in IODA1 and not expected to fail.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move a couple of existing scripts under there. Remove scripts directory:
a script is a tool, a tool is not a script.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently powerpc has to introduce a dependency on its default build
target zImage in order to run a relocation check pass over the linked
vmlinux. This is deficient because the check is not run if the plain
vmlinux target is built, or if one of the other boot targets is built.
Switch to using the kbuild post-link pass, added in commit fbe6e37dab
("kbuild: add arch specific post-link Makefile") in order to run this
check. In future powerpc will use this to do more complicated operations,
but initially using it for something simple is a good first step.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
An externally triggered system reset (e.g., via QEMU nmi command, or pseries
reset button) can cause system reset interrupts on all CPUs. In case this causes
xmon to be entered, it is undesirable for the primary (first) CPU into xmon to
trigger an NMI IPI to others, because this may cause a nested system reset
interrupt.
So spin for a time waiting for secondaries to join xmon before performing the
NMI IPI, similarly to what the crash dump code does.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Only do it when we come in from system reset, not via sysrq etc.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Have the NMI IPI code use this op when the platform defines it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a simple NMI IPI system that handles concurrency and reentrancy.
The platform does not have to implement a true non-maskable interrupt,
the default is to simply use the debugger break IPI message. This has
now been co-opted for a general IPI message, and users (debugger and
crash) have been reimplemented on top of the NMI system.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Incorporate incremental fixes from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
System reset is a non-maskable interrupt from Linux's point of view
(occurs under local_irq_disable()), so it should use nmi_enter/exit.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The system reset interrupt is used for crash/debug situations, so it is
desirable to have as little impact on the normal state of the system as
possible.
Currently it uses the current kernel stack to process the exception.
This stores into the stack which may be involved with the crash. The
stack pointer may be corrupted, or it may have overflowed.
Avoid or minimise these problems by creating a dedicated NMI stack for
the system reset interrupt to use.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation for using a dedicated stack for system reset interrupts,
prevent a nested system reset from recovering, in order to simplify
code that is called in crash/debug path. This allows a system reset
interrupt to just use the base stack pointer.
Keep an in_nmi nesting counter similarly to the in_mce counter. Consider
the interrrupt non-recoverable if it is taken inside another system
reset.
Interrupt nesting could be allowed similarly to MCE, but system reset
is a special case that's not for normal operation, so simplicity wins
until there is requirement for nested system reset interrupts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The system reset interrupt can occur when MSR_EE=0, and it currently
uses the PACA_EXGEN save area.
Some PACA_EXGEN interrupts have a window where MSR_RI=1 and MSR_EE=0
when the save area is still in use. A system reset interrupt in this
window can lead to undetected corruption when the save area gets
overwritten.
This patch introduces PACA_EXNMI save area for system reset exceptions,
which closes this corruption window. It's also helpful to retain the
EXGEN state for debugging situations, even if not considering the
recoverability aspect.
This patch also moves the PACA_EXMC area down to a less frequently used
part of the paca with the new save area.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This code is common to a few exceptions, and another user will be added.
This causes a trivial change to generated code:
- 604: std r9,416(r1)
- 608: mfspr r11,314
- 60c: std r11,368(r1)
- 610: mfspr r12,315
+ 604: mfspr r11,314
+ 608: mfspr r12,315
+ 60c: std r9,416(r1)
+ 610: std r11,368(r1)
machine_check_powernv_early could also use this, but that requires non
trivial changes to generated code, so that's for another patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Subsequent patches will add more non-RI variant exceptions, so
create a macro for it rather than open-code it.
This does not change generated instructions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cell will wake from low power state at the system reset interrupt,
with the event encoded in SRR1, rather than waking at the interrupt
vector that corresponds to that event.
The system reset handler for this platform decodes SRR1 event reason
and calls the interrupt handler to process it directly from the system
reset handlre.
A subsequent change will treat the system reset interrupt as a Linux NMI
with its own per-CPU stack, and this will no longer work. Remove the
external and decrementer handlers from the system reset handler.
- The external exception remains raised and will fire again at the
EE interrupt vector when system reset returns.
- The decrementer is set to 1 so it will be raised again and fire when
the system reset returns.
It is possible to branch to an idle handler from the system reset
interrupt (like POWER does), then restore a normal stack and restore
this optimisation. But simplicity wins for now.
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PA Semi will wake from low power state at the system reset interrupt,
with the event encoded in SRR1, rather than waking at the interrupt
vector that corresponds to that event.
The system reset handler for this platform decodes SRR1 event reason
and calls the interrupt handler to process it directly from the system
reset handlre.
A subsequent change will treat the system reset interrupt as a Linux NMI
with its own per-CPU stack, and this will no longer work. Remove the
external and decrementer handlers from the system reset handler.
- The external exception remains raised and will fire again at the
EE interrupt vector when system reset returns.
- The decrementer is set to 1 so it will be raised again and fire when
the system reset returns.
It is possible to branch to an idle handler from the system reset
interrupt (like POWER does), then restore a normal stack and restore
this optimisation. But simplicity wins for now.
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Split ftrace_64.S further retaining the core ftrace 64-bit aspects
in ftrace_64.S and moving ftrace_caller() and ftrace_graph_caller() into
separate files based on -mprofile-kernel. The livepatch routines are all
now contained within the mprofile file.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
entry_*.S now includes a lot more than just kernel entry/exit code. As a
first step at cleaning this up, let's split out the ftrace bits into
separate files. Also move all related tracing code into a new trace/
subdirectory.
No functional changes.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Page table dump debugfs file is named 'kernel_page_tables' on
all other architectures implementing it, while is is named
'kernel_pagetables' on powerpc. This patch renames it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some targets, _PAGE_RW is 0 and this is _PAGE_RO which is used.
There is also _PAGE_SHARED that is missing.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On PPC32 (eg. mpc885_ads_defconfig), page table dump compilation fails as
follows. This is because the memory layout is slightly different on PPC32. This
patch adapts it.
arch/powerpc/mm/dump_linuxpagetables.c: In function 'walk_pagetables':
arch/powerpc/mm/dump_linuxpagetables.c:369:10: error: 'KERN_VIRT_START' undeclared (first use in this function)
...
Fixes: 8eb07b1870 ("powerpc/mm: Dump linux pagetables")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_tlbiel_pid() is called with a ric (Radix Invalidation Control) argument of
either RIC_FLUSH_TLB or RIC_FLUSH_ALL.
RIC_FLUSH_ALL says to invalidate the entire TLB and the Page Walk Cache (PWC).
To flush the whole TLB, we have to iterate over each set (congruence class) of
the TLB. Currently we do that and pass RIC_FLUSH_ALL each time. That is not
incorrect but it means we flush the PWC 128 times, when once would suffice.
Fix it by doing the first flush with the ric value we're passed, and then if it
was RIC_FLUSH_ALL, we downgrade it to RIC_FLUSH_TLB, because we know we have
just flushed the PWC and don't need to do it again.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Split out of combined patch, tweak logic, rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we implement flushing of the page walk cache (PWC) by calling
_tlbiel_pid() with a RIC (Radix Invalidation Control) value of 1 which says to
only flush the PWC.
But _tlbiel_pid() loops over each set (congruence class) of the TLB, which is
not necessary when we're just flushing the PWC.
In fact the set argument is ignored for a PWC flush, so essentially we're just
flushing the PWC 127 extra times for no benefit.
Fix it by adding tlbiel_pwc() which just does a single flush of the PWC.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Split out of combined patch, drop _ in name, rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recently we merged the native xive support for Power9, and then separately some
reworks for doorbell IPI support. In isolation both series were OK, but the
merged result had a bug in one case.
On P9 DD1 we use pnv_p9_dd1_cause_ipi() which tries to use doorbells, and then
falls back to the interrupt controller. However the fallback is implemented by
calling icp_ops->cause_ipi. But now that xive support is merged we might be
using xive, in which case icp_ops is not initialised, it's a xics specific
structure. This leads to an oops such as:
Unable to handle kernel paging request for data at address 0x00000028
Oops: Kernel access of bad area, sig: 11 [#1]
NIP pnv_p9_dd1_cause_ipi+0x74/0xe0
LR smp_muxed_ipi_message_pass+0x54/0x70
To fix it, rather than using icp_ops which might be NULL, have both xics and
xive set smp_ops->cause_ipi, and then in the powernv code we save that as
ic_cause_ipi before overriding smp_ops->cause_ipi. For paranoia add a WARN_ON()
to check if somehow smp_ops->cause_ipi is NULL.
Fixes: b866cc2199 ("powerpc: Change the doorbell IPI calling convention")
Tested-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In opal_export_attrs() we dynamically allocate some bin_attributes. They're
allocated with kmalloc() and although we initialise most of the fields, we don't
initialise write() or mmap(), and in particular we don't initialise the lockdep
related fields in the embedded struct attribute.
This leads to a lockdep warning at boot:
BUG: key c0000000f11906d8 not in .data!
WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3136 lockdep_init_map+0x28c/0x2a0
...
Call Trace:
lockdep_init_map+0x288/0x2a0 (unreliable)
__kernfs_create_file+0x8c/0x170
sysfs_add_file_mode_ns+0xc8/0x240
__machine_initcall_powernv_opal_init+0x60c/0x684
do_one_initcall+0x60/0x1c0
kernel_init_freeable+0x2f4/0x3d4
kernel_init+0x24/0x160
ret_from_kernel_thread+0x5c/0xb0
Fix it by kzalloc'ing the attr, which fixes the uninitialised write() and
mmap(), and calling sysfs_bin_attr_init() on it to initialise the lockdep
fields.
Fixes: 11fe909d23 ("powerpc/powernv: Add OPAL exports attributes to sysfs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent patch to add runtime configuration of the ASLR limits added a bug in
arch_mmap_rnd() where we may shift an integer (32-bits) by up to 33 bits,
leading to undefined behaviour.
In practice it exhibits as every process seg faulting instantly, presumably
because the rnd value hasn't been restricited by the modulus at all. We didn't
notice because it only happens under certain kernel configurations and if the
number of bits is actually set to a large value.
Fix it by switching to unsigned long.
Fixes: 9fea59bd7c ("powerpc/mm: Add support for runtime configuration of ASLR limits")
Reported-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc expects IRQs to already be (soft) disabled when switch_mm() is
called, as made clear in the commit message of 9c1e105238 ("powerpc: Allow
perf_counters to access user memory at interrupt time").
Aside from any race conditions that might exist between switch_mm() and an IRQ,
there is also an unconditional hard_irq_disable() in switch_slb(). If that isn't
followed at some point by an IRQ enable then interrupts will remain disabled
until we return to userspace.
It is true that when switch_mm() is called from the scheduler IRQs are off, but
not when it's called by use_mm(). Looking closer we see that last year in commit
f98db6013c ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
this was made more explicit by the addition of switch_mm_irqs_off() which is now
called by the scheduler, vs switch_mm() which is used by use_mm().
Arguably it is a bug in use_mm() to call switch_mm() in a different context than
it expects, but fixing that will take time.
This was discovered recently when vhost started throwing warnings such as:
BUG: sleeping function called from invalid context at kernel/mutex.c:578
in_atomic(): 0, irqs_disabled(): 1, pid: 10768, name: vhost-10760
no locks held by vhost-10760/10768.
irq event stamp: 10
hardirqs last enabled at (9): _raw_spin_unlock_irq+0x40/0x80
hardirqs last disabled at (10): switch_slb+0x2e4/0x490
softirqs last enabled at (0): copy_process+0x5e8/0x1260
softirqs last disabled at (0): (null)
Call Trace:
show_stack+0x88/0x390 (unreliable)
dump_stack+0x30/0x44
__might_sleep+0x1c4/0x2d0
mutex_lock_nested+0x74/0x5c0
cgroup_attach_task_all+0x5c/0x180
vhost_attach_cgroups_work+0x58/0x80 [vhost]
vhost_worker+0x24c/0x3d0 [vhost]
kthread+0xec/0x100
ret_from_kernel_thread+0x5c/0xd4
Prior to commit 04b96e5528 ("vhost: lockless enqueuing") (Aug 2016) the
vhost_worker() would do a spin_unlock_irq() not long after calling use_mm(),
which had the effect of reenabling IRQs. Since that commit removed the locking
in vhost_worker() the body of the vhost_worker() loop now runs with interrupts
off causing the warnings.
This patch addresses the problem by making the powerpc code mirror the x86 code,
ie. we disable interrupts in switch_mm(), and optimise the scheduler case by
defining switch_mm_irqs_off().
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Flesh out/rewrite change log, add stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For CPUs present at boot each logical CPU acquires a reference to the
associated device node of the core. This happens in register_cpu() which
is called by topology_init(). The result of this is that we end up with
a reference held by each thread of the core. However, these references
are never freed if the CPU core is DLPAR removed.
This patch fixes the reference leaks by acquiring and releasing the references
in the CPU hotplug callbacks un/register_cpu_online(). With this patch symmetric
reference counting is observed with both CPUs present at boot, and those DLPAR
added after boot.
Fixes: f86e4718f2 ("driver/core: cpu: initialize of_node in cpu's device struture")
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf9d ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.
Commit 0829f6d1f6 ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().
A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().
Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.
This patch fixes a refcount underflow introduced by commit 0829f6d1f6, and
recently exposed by the upstreaming of the recount API.
Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.
rpadlpar_io: slot PHB 72 removed
refcount_t: underflow; use-after-free.
------------[ cut here ]------------
WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110
Fixes: 0829f6d1f6 ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the code that dumps SLB entries uses a double-nested if. This
means the actual dumping logic is a bit squashed. Deindent it by using
continue.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Although most of these kprobes patches are powerpc specific, there's a couple
that touch generic code (with Acks). At the moment there's one conflict with
acme's tree, but it's not too bad. Still just in case some other conflicts show
up, we've put these in a topic branch so another tree could merge some or all of
it if necessary.
KPROBES_ON_FTRACE avoids much of the overhead of regular kprobes as it
eliminates the need for a trap, as well as the need to emulate or single-step
instructions.
Though OPTPROBES provides us with similar performance, we have limited
optprobes trampoline slots. As such, when asked to probe at a function
entry, default to using the ftrace infrastructure.
With:
# cd /sys/kernel/debug/tracing
# echo 'p _do_fork' > kprobe_events
before patch:
# cat ../kprobes/list
c0000000000daf08 k _do_fork+0x8 [DISABLED]
c000000000044fc0 k kretprobe_trampoline+0x0 [OPTIMIZED]
and after patch:
# cat ../kprobes/list
c0000000000d074c k _do_fork+0xc [DISABLED][FTRACE]
c0000000000412b0 k kretprobe_trampoline+0x0 [OPTIMIZED]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
kprobe_lookup_name() is specific to the kprobe subsystem and may not always
return the function entry point (in a subsequent patch for KPROBES_ON_FTRACE).
For looking up function entry points, introduce a separate helper and use it
in optprobes.c
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Allow kprobes to be placed on ftrace _mcount() call sites. This optimization
avoids the use of a trap, by riding on ftrace infrastructure.
This depends on HAVE_DYNAMIC_FTRACE_WITH_REGS which depends on MPROFILE_KERNEL,
which is only currently enabled on powerpc64le with newer toolchains.
Based on the x86 code by Masami.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pass the real LR to the ftrace handler. This is needed for KPROBES_ON_FTRACE for
the pre handlers.
Also, with KPROBES_ON_FTRACE, the link register may be updated by the pre
handlers or by a registed kretprobe. Honor updated LR by restoring it from
pt_regs, rather than from the stack save area.
Live patch and function graph continue to work fine with this change.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Blacklist all the exception common/OOL handlers as the kernel stack is not yet
setup, which means we can't take a trap at this point.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce __head_end to mark end of the early fixed sections and use it to
blacklist all exception handlers from kprobes.
mpe: We do not need to do anything special for relocatable kernels, where the
exception vectors are split from the main kernel, as the split vectors are
already excluded by the check for kernel_text_address().
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Move __head_end outside #ifdef 64-bit to unbreak the 32-bit build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Along similar lines as commit 9326638cbe ("kprobes, x86: Use NOKPROBE_SYMBOL()
instead of __kprobes annotation"), convert __kprobes annotation to either
NOKPROBE_SYMBOL() or nokprobe_inline. The latter forces inlining, in which case
the caller needs to be added to NOKPROBE_SYMBOL().
Also:
- blacklist arch_deref_entry_point(), and
- convert a few regular inlines to nokprobe_inline in lib/sstep.c
A key benefit is the ability to detect such symbols as being
blacklisted. Before this patch:
$ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem
$ perf probe read_mem
Failed to write event: Invalid argument
Error: Failed to add events.
$ dmesg | tail -1
[ 3736.112815] Could not insert probe at _text+10014968: -22
After patch:
$ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem
0xc000000000072b50-0xc000000000072d20 read_mem
$ perf probe read_mem
read_mem is blacklisted function, skip it.
Added new events:
(null):(null) (on read_mem)
probe:read_mem (on read_mem)
You can now use it in all perf tools, such as:
perf record -e probe:read_mem -aR sleep 1
$ grep " read_mem" /proc/kallsyms
c000000000072b50 t read_mem
c0000000005f3b40 t read_mem
$ cat /sys/kernel/debug/kprobes/list
c0000000005f3b48 k read_mem+0x8 [DISABLED]
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Minor change log formatting, fix up some conflicts]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
