Rearrange gb_bundle_find() so it follows the pattern used by
gb_connection_find().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Check at bundle creation time to ensure we're not creating a bundle
with an id that's the same as one that's already been created.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Normally, its a good practice to free resources in the reverse order in
which they are allocated, so that all the dependencies can be sorted out
properly.
This is true while creating/destroying devices as well. For example
consider this scenario (I faced a crash with control protocol due to
this). For a new module, we will first create a bundle+connection for
the control cport and then create other bundles/connections after
parsing manifest.
And while destroying interface on module hot unplug, we are removing the
devices in the order they are added. And so the bundle/connection for
the control cport are destroyed first. But, control cport was still
required while destroying other bundles/connections.
To solve this problem, lets destroy the resources in the reverse order
in which they are added.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The kernfs code guarantees we'll get a NUL-terminated buffer.
Use kstrdup() rather than kzalloc() + memcpy() in state_store()
making it slightly clearer what we're doing. This has the added
benefit of guaranteeing that the stored string has no NUL character
inside it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A bundle has a state file, that is managed by the endo userspace
process. This file can be written to and any process that is polling on
the file will be woken up and can read the new value. It's a "cheap"
IPC for programs that are not allowed to do anything other than
read/write to kernel sysfs files.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex suggested to name it class instead of class type.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A Greybus driver will bind to a bundle, not an interface. Lets follow
this rule in code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
An interface can have 1 or more bundles. On link-up event, we must initialize
all the bundles associated with the interface.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently we are creating bundles based on interface descriptors. An interface
can have one or more bundles associated with it and so a bundle must be created
based on a bundle descriptor.
Also get class_type from bundle descriptor.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Devices registered with the device-core needs to be freed by calling
device_unregister(). For module we are calling just put_device() and for
bundle, connection and interface we are calling device_del().
All of these are incomplete and so none of them get freed, i.e. the
.release() routine is never called for their devices.
Module being a special case that it needs to maintain a refcount or a
list of interfaces to trace its usage count. I have chosen refcount.
And so once the refcount is zero, we can Unregister the device and
module will get free as well.
Because of this bug in freeing devices, their sysfs directories were not
getting removed properly and after a manifest is parsed with the help of
gbsim, removing modules was creating problems. The sysfs directory
'greybus' wasn't getting removed. And inserting the modules again
resulted in warnings and insmod failure.
WARNING: CPU: 3 PID: 4277 at
/build/buildd/linux-3.13.0/fs/sysfs/dir.c:486
sysfs_warn_dup+0x86/0xa0()
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make sure to release the spin lock protecting the interface bundle lists
before tearing down the connections and removing the bundle device,
which are operations that may sleep.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Right now some sysfs attributes have \n and some do not, so fix that and
put \n at the end of all of them to make it easier to parse things
properly in userspace.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Use a "name" for when we don't have a valid device id yet, instead of a
magic value of 0xff.
Reported-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>
When adding a new protocol to the system, walk all bundles and try to
hook up any connections that do not have a protocol already. This sets
the stage to allow for protocols to be loaded at any time, not just
before the device is seen in the system.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Modules in the greybus system sit above the interface, so insert them
early in the sysfs tree. We dynamically create them when we have an
interface that references a module, as we don't get a "module create"
message directly. They also dynamically go away when the last interface
associated with a module is removed.
Naming scheme for modules/interfaces/bundles/connections is bumped up by
one ':', and now looks like the following:
/sys/bus/greybus $ tree
.
├── devices
│ ├── 7 -> ../../../devices/pci0000:00/0000:00:14.0/usb1/1-1/7
│ ├── 7:7 -> ../../../devices/pci0000:00/0000:00:14.0/usb1/1-1/7/7:7
│ ├── 7:7:0 -> ../../../devices/pci0000:00/0000:00:14.0/usb1/1-1/7/7:7/7:7:0
│ └── 7:7:0:1 -> ../../../devices/pci0000:00/0000:00:14.0/usb1/1-1/7/7:7/7:7:0/7:7:0:1
├── drivers
├── drivers_autoprobe
├── drivers_probe
└── uevent
6 directories, 3 files
/sys/bus/greybus $ grep . devices/*/uevent
devices/7/uevent:DEVTYPE=greybus_module
devices/7:7/uevent:DEVTYPE=greybus_interface
devices/7:7:0/uevent:DEVTYPE=greybus_bundle
devices/7:7:0:1/uevent:DEVTYPE=greybus_connection
We still have some "confusion" about interface ids and module ids, which
will be cleaned up later when the svc control protocol changes die down,
right now we just name a module after the interface as we don't have any
modules that have multiple interfaces in our systems.
This has been tested with gbsim.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Rename struct gb_interface_block to struct gb_interface
Lots of renaming, and variable renames as well (gb_ib->intf), but all
should be sane with regards to the new naming scheme we are using.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex pointed out one rename I missed previously, this fixes up the
interface_block list of bundles name.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Rename struct gb_interface to struct gb_bundle
It's a lot of renaming, some structures got renamed and also some
fields, but the goal was to rename things to make sense with the new
naming of how the system is put together in the 'driver model' view.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
We are renameing the "interface" term to "bundle" so rename the files
before we start changing structure names to make it easier for people to
see what really is happening in the changes.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-12-13 13:35:33 -05:00
Renamed from drivers/staging/greybus/interface.c (Browse further)
