1
0
Fork 0
Commit Graph

5830 Commits (c27a2a1ecf699ed8d77eafa59ae28d81347eac20)

Author SHA1 Message Date
John Millikin 2abc54579d lib/raid6: Let $(UNROLL) rules work with macOS userland
[ Upstream commit 0c36d88cff ]

Older versions of BSD awk are fussy about the order of '-v' and '-f'
flags, and require a space after the flag name. This causes build
failures on platforms with an old awk, such as macOS and NetBSD.

Since GNU awk and modern versions of BSD awk (distributed with
FreeBSD/OpenBSD) are fine with either form, the definition of
'cmd_unroll' can be trivially tweaked to let the lib/raid6 Makefile
work with both old and new awk flag dialects.

Signed-off-by: John Millikin <john@john-millikin.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19 18:26:15 +01:00
Huang Shijie 663a0bcb3f lib/genalloc: fix the overflow when size is too big
[ Upstream commit 3684566384 ]

Some graphic card has very big memory on chip, such as 32G bytes.

In the following case, it will cause overflow:

    pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
    ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);

    va = gen_pool_alloc(pool, SZ_4G);

The overflow occurs in gen_pool_alloc_algo_owner():

		....
		size = nbits << order;
		....

The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.

This patch converts some "int" to "unsigned long", and
changes the compare code in while.

Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12 20:16:10 +01:00
Willy Tarreau 867fbf2bb7 lib/syscall: fix syscall registers retrieval on 32-bit platforms
commit 4f134b89a2 upstream.

Lilith >_> and Claudio Bozzato of Cisco Talos security team reported
that collect_syscall() improperly casts the syscall registers to 64-bit
values leaking the uninitialized last 24 bytes on 32-bit platforms, that
are visible in /proc/self/syscall.

The cause is that info->data.args are u64 while syscall_get_arguments()
uses longs, as hinted by the bogus pointer cast in the function.

Let's just proceed like the other call places, by retrieving the
registers into an array of longs before assigning them to the caller's
array.  This was successfully tested on x86_64, i386 and ppc32.

Reference: CVE-2020-28588, TALOS-2020-1211
Fixes: 631b7abacd ("ptrace: Remove maxargs from task_current_syscall()")
Cc: Greg KH <greg@kroah.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (ppc32)
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11 13:23:32 +01:00
George Spelvin 213e1238ca random32: make prandom_u32() output unpredictable
commit c51f8f88d7 upstream.

Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output.  An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.

It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack.  Oops.

This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key.  (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.)  Speed is prioritized over security;
attacks are rare, while performance is always wanted.

Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.

Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution.  This patch replaces
it.

Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
  to prandom.h for later use; merged George's prandom_seed() proposal;
  inlined siprand_u32(); replaced the net_rand_state[] array with 4
  members to fix a build issue; cosmetic cleanups to make checkpatch
  happy; fixed RANDOM32_SELFTEST build ]
Signed-off-by: Willy Tarreau <w@1wt.eu>
[wt: backported to 5.4 -- no tracepoint there]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18 19:20:20 +01:00
Vasily Gorbik b1d16be4f2 lib/crc32test: remove extra local_irq_disable/enable
commit aa4e460f09 upstream.

Commit 4d004099a6 ("lockdep: Fix lockdep recursion") uncovered the
following issue in lib/crc32test reported on s390:

  BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1
  caller is lockdep_hardirqs_on_prepare+0x48/0x270
  CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.9.0-next-20201015-15164-g03d992bd2de6 #19
  Hardware name: IBM 3906 M04 704 (LPAR)
  Call Trace:
    lockdep_hardirqs_on_prepare+0x48/0x270
    trace_hardirqs_on+0x9c/0x1b8
    crc32_test.isra.0+0x170/0x1c0
    crc32test_init+0x1c/0x40
    do_one_initcall+0x40/0x130
    do_initcalls+0x126/0x150
    kernel_init_freeable+0x1f6/0x230
    kernel_init+0x22/0x150
    ret_from_fork+0x24/0x2c
  no locks held by swapper/0/1.

Remove extra local_irq_disable/local_irq_enable helpers calls.

Fixes: 5fb7f87408 ("lib: add module support to crc32 tests")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/patch.git-4369da00c06e.your-ad-here.call-01602859837-ext-1679@work.hours
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10 12:37:27 +01:00
Lee Jones 61402d61a2 Fonts: Replace discarded const qualifier
commit 9522750c66 upstream.

Commit 6735b4632d ("Fonts: Support FONT_EXTRA_WORDS macros for built-in
fonts") introduced the following error when building rpc_defconfig (only
this build appears to be affected):

 `acorndata_8x8' referenced in section `.text' of arch/arm/boot/compressed/ll_char_wr.o:
    defined in discarded section `.data' of arch/arm/boot/compressed/font.o
 `acorndata_8x8' referenced in section `.data.rel.ro' of arch/arm/boot/compressed/font.o:
    defined in discarded section `.data' of arch/arm/boot/compressed/font.o
 make[3]: *** [/scratch/linux/arch/arm/boot/compressed/Makefile:191: arch/arm/boot/compressed/vmlinux] Error 1
 make[2]: *** [/scratch/linux/arch/arm/boot/Makefile:61: arch/arm/boot/compressed/vmlinux] Error 2
 make[1]: *** [/scratch/linux/arch/arm/Makefile:317: zImage] Error 2

The .data section is discarded at link time.  Reinstating acorndata_8x8 as
const ensures it is still available after linking.  Do the same for the
other 12 built-in fonts as well, for consistency purposes.

Cc: <stable@vger.kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6735b4632d ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Co-developed-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102183242.2031659-1-yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10 12:37:26 +01:00
Douglas Gilbert c421c08208 sgl_alloc_order: fix memory leak
[ Upstream commit b2a182a402 ]

sgl_alloc_order() can fail when 'length' is large on a memory
constrained system. When order > 0 it will potentially be
making several multi-page allocations with the later ones more
likely to fail than the earlier one. So it is important that
sgl_alloc_order() frees up any pages it has obtained before
returning NULL. In the case when order > 0 it calls the wrong
free page function and leaks. In testing the leak was
sufficient to bring down my 8 GiB laptop with OOM.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05 11:43:22 +01:00
Tobias Jordan 410f50b41c lib/crc32.c: fix trivial typo in preprocessor condition
[ Upstream commit 904542dc56 ]

Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS.
Obviously, the _be function should be governed by the _BE_ define.

This probably never pops up as it's hard to come up with a configuration
where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using
bitwise CRC anyway.

Fixes: 46c5801eaf ("crc32: bolt on crc32c")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lkml.kernel.org/r/20200923182122.GA3338@agrajag.zerfleddert.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29 09:57:52 +01:00
Matthew Wilcox (Oracle) 2577720d35 ida: Free allocated bitmap in error path
[ Upstream commit a219b856a2 ]

If a bitmap needs to be allocated, and then by the time the thread
is scheduled to be run again all the indices which would satisfy the
allocation have been allocated then we would leak the allocation.  Almost
impossible to hit in practice, but a trivial fix.  Found by Coverity.

Fixes: f32f004cdd ("ida: Convert to XArray")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29 09:57:47 +01:00
Peilin Ye f51ec3fd71 Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts
commit 6735b4632d upstream.

syzbot has reported an issue in the framebuffer layer, where a malicious
user may overflow our built-in font data buffers.

In order to perform a reliable range check, subsystems need to know
`FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor,
`struct console_font` does not contain `FONTDATAMAX`, and is part of the
UAPI, making it infeasible to modify it.

For user-provided fonts, the framebuffer layer resolves this issue by
reserving four extra words at the beginning of data buffers. Later,
whenever a function needs to access them, it simply uses the following
macros:

Recently we have gathered all the above macros to <linux/font.h>. Let us
do the same thing for built-in fonts, prepend four extra words (including
`FONTDATAMAX`) to their data buffers, so that subsystems can use these
macros for all fonts, no matter built-in or user-provided.

This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h".

Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14 10:32:56 +02:00
Thibaut Sautereau 1d13c3a500 random32: Restore __latent_entropy attribute on net_rand_state
[ Upstream commit 09a6b0bc3b ]

Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.

From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.

Fixes: 83bdc7275e ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07 08:01:29 +02:00
Nick Desaulniers f05f667f87 lib/string.c: implement stpcpy
commit 1e1b6d63d6 upstream.

LLVM implemented a recent "libcall optimization" that lowers calls to
`sprintf(dest, "%s", str)` where the return value is used to
`stpcpy(dest, str) - dest`.

This generally avoids the machinery involved in parsing format strings.
`stpcpy` is just like `strcpy` except it returns the pointer to the new
tail of `dest`.  This optimization was introduced into clang-12.

Implement this so that we don't observe linkage failures due to missing
symbol definitions for `stpcpy`.

Similar to last year's fire drill with: commit 5f074f3e19
("lib/string.c: implement a basic bcmp")

The kernel is somewhere between a "freestanding" environment (no full
libc) and "hosted" environment (many symbols from libc exist with the
same type, function signature, and semantics).

As Peter Anvin notes, there's not really a great way to inform the
compiler that you're targeting a freestanding environment but would like
to opt-in to some libcall optimizations (see pr/47280 below), rather
than opt-out.

Arvind notes, -fno-builtin-* behaves slightly differently between GCC
and Clang, and Clang is missing many __builtin_* definitions, which I
consider a bug in Clang and am working on fixing.

Masahiro summarizes the subtle distinction between compilers justly:
  To prevent transformation from foo() into bar(), there are two ways in
  Clang to do that; -fno-builtin-foo, and -fno-builtin-bar.  There is
  only one in GCC; -fno-buitin-foo.

(Any difference in that behavior in Clang is likely a bug from a missing
__builtin_* definition.)

Masahiro also notes:
  We want to disable optimization from foo() to bar(),
  but we may still benefit from the optimization from
  foo() into something else. If GCC implements the same transform, we
  would run into a problem because it is not -fno-builtin-bar, but
  -fno-builtin-foo that disables that optimization.

  In this regard, -fno-builtin-foo would be more future-proof than
  -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
  may want to prevent calls from foo() being optimized into calls to
  bar(), but we still may want other optimization on calls to foo().

It seems that compilers today don't quite provide the fine grain control
over which libcall optimizations pseudo-freestanding environments would
prefer.

Finally, Kees notes that this interface is unsafe, so we should not
encourage its use.  As such, I've removed the declaration from any
header, but it still needs to be exported to avoid linkage errors in
modules.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Andy Lavr <andy.lavr@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=47162
Link: https://bugs.llvm.org/show_bug.cgi?id=47280
Link: https://github.com/ClangBuiltLinux/linux/issues/1126
Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html
Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html
Link: https://reviews.llvm.org/D85963
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01 13:18:23 +02:00
Iurii Zaikin 03c4d42e3c kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
[ Upstream commit 2cb80dbbba ]

KUnit tests for initialized data behavior of proc_dointvec that is
explicitly checked in the code. Includes basic parsing tests including
int min/max overflow.

Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01 13:17:10 +02:00
Andy Shevchenko b9fb631f6b kobject: Restore old behaviour of kobject_del(NULL)
commit 40b8b826a6 upstream.

The commit 079ad2fb4b ("kobject: Avoid premature parent object freeing in
kobject_cleanup()") inadvertently dropped a possibility to call kobject_del()
with NULL pointer. Restore the old behaviour.

Fixes: 079ad2fb4b ("kobject: Avoid premature parent object freeing in kobject_cleanup()")
Cc: stable <stable@vger.kernel.org>
Reported-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Link: https://lore.kernel.org/r/20200803082706.65347-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 13:47:52 +02:00
Tiezhu Yang 8620d18575 test_kmod: avoid potential double free in trigger_config_run_type()
[ Upstream commit 0776d1231b ]

Reset the member "test_fs" of the test configuration after a call of the
function "kfree_const" to a null pointer so that a double memory release
will not be performed.

Fixes: d9c6a72d6f ("kmod: add test driver to stress test the module loader")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Sergey Kvachonok <ravenexp@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Vroon <chainsaw@gentoo.org>
Cc: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/r/20200610154923.27510-4-mcgrof@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21 13:05:37 +02:00
Vladimir Oltean cf304df99f devres: keep both device name and resource name in pretty name
[ Upstream commit 35bd8c07db ]

Sometimes debugging a device is easiest using devmem on its register
map, and that can be seen with /proc/iomem. But some device drivers have
many memory regions. Take for example a networking switch. Its memory
map used to look like this in /proc/iomem:

1fc000000-1fc3fffff : pcie@1f0000000
  1fc000000-1fc3fffff : 0000:00:00.5
    1fc010000-1fc01ffff : sys
    1fc030000-1fc03ffff : rew
    1fc060000-1fc0603ff : s2
    1fc070000-1fc0701ff : devcpu_gcb
    1fc080000-1fc0800ff : qs
    1fc090000-1fc0900cb : ptp
    1fc100000-1fc10ffff : port0
    1fc110000-1fc11ffff : port1
    1fc120000-1fc12ffff : port2
    1fc130000-1fc13ffff : port3
    1fc140000-1fc14ffff : port4
    1fc150000-1fc15ffff : port5
    1fc200000-1fc21ffff : qsys
    1fc280000-1fc28ffff : ana

But after the patch in Fixes: was applied, the information is now
presented in a much more opaque way:

1fc000000-1fc3fffff : pcie@1f0000000
  1fc000000-1fc3fffff : 0000:00:00.5
    1fc010000-1fc01ffff : 0000:00:00.5
    1fc030000-1fc03ffff : 0000:00:00.5
    1fc060000-1fc0603ff : 0000:00:00.5
    1fc070000-1fc0701ff : 0000:00:00.5
    1fc080000-1fc0800ff : 0000:00:00.5
    1fc090000-1fc0900cb : 0000:00:00.5
    1fc100000-1fc10ffff : 0000:00:00.5
    1fc110000-1fc11ffff : 0000:00:00.5
    1fc120000-1fc12ffff : 0000:00:00.5
    1fc130000-1fc13ffff : 0000:00:00.5
    1fc140000-1fc14ffff : 0000:00:00.5
    1fc150000-1fc15ffff : 0000:00:00.5
    1fc200000-1fc21ffff : 0000:00:00.5
    1fc280000-1fc28ffff : 0000:00:00.5

That patch made a fair comment that /proc/iomem might be confusing when
it shows resources without an associated device, but we can do better
than just hide the resource name altogether. Namely, we can print the
device name _and_ the resource name. Like this:

1fc000000-1fc3fffff : pcie@1f0000000
  1fc000000-1fc3fffff : 0000:00:00.5
    1fc010000-1fc01ffff : 0000:00:00.5 sys
    1fc030000-1fc03ffff : 0000:00:00.5 rew
    1fc060000-1fc0603ff : 0000:00:00.5 s2
    1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb
    1fc080000-1fc0800ff : 0000:00:00.5 qs
    1fc090000-1fc0900cb : 0000:00:00.5 ptp
    1fc100000-1fc10ffff : 0000:00:00.5 port0
    1fc110000-1fc11ffff : 0000:00:00.5 port1
    1fc120000-1fc12ffff : 0000:00:00.5 port2
    1fc130000-1fc13ffff : 0000:00:00.5 port3
    1fc140000-1fc14ffff : 0000:00:00.5 port4
    1fc150000-1fc15ffff : 0000:00:00.5 port5
    1fc200000-1fc21ffff : 0000:00:00.5 qsys
    1fc280000-1fc28ffff : 0000:00:00.5 ana

Fixes: 8d84b18f56 ("devres: always use dev_name() in devm_ioremap_resource()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200601095826.1757621-1-olteanv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21 13:05:32 +02:00
Heikki Krogerus adbb26e2d4 kobject: Avoid premature parent object freeing in kobject_cleanup()
[ Upstream commit 079ad2fb4b ]

If kobject_del() is invoked by kobject_cleanup() to delete the
target kobject, it may cause its parent kobject to be freed
before invoking the target kobject's ->release() method, which
effectively means freeing the parent before dealing with the
child entirely.

That is confusing at best and it may also lead to functional
issues if the callers of kobject_cleanup() are not careful enough
about the order in which these calls are made, so avoid the
problem by making kobject_cleanup() drop the last reference to
the target kobject's parent at the end, after invoking the target
kobject's ->release() method.

[ rjw: Rewrite the subject and changelog, make kobject_cleanup()
  drop the parent reference only when __kobject_del() has been
  called. ]

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 7589238a8c ("Revert "software node: Simplify software_node_release() function"")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1908555.IiAGLGrh1Z@kreacher
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19 08:16:11 +02:00
Jim Cromie db9b14ae4b dyndbg: fix a BUG_ON in ddebug_describe_flags
[ Upstream commit f678ce8cc3 ]

ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON.  Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.

Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.

Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19 08:16:04 +02:00
Herbert Xu f2b639b2aa crc-t10dif: Fix potential crypto notify dead-lock
[ Upstream commit 3906f64022 ]

The crypto notify call occurs with a read mutex held so you must
not do any substantial work directly.  In particular, you cannot
call crypto_alloc_* as they may trigger further notifications
which may dead-lock in the presence of another writer.

This patch fixes this by postponing the work into a work queue and
taking the same lock in the module init function.

While we're at it this patch also ensures that all RCU accesses are
marked appropriately (tested with sparse).

Finally this also reveals a race condition in module param show
function as it may be called prior to the module init function.
It's fixed by testing whether crct10dif_tfm is NULL (this is true
iff the init function has not completed assuming fallback is false).

Fixes: 11dcb1037f ("crc-t10dif: Allow current transform to be...")
Fixes: b76377543b ("crc-t10dif: Pick better transform if one...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19 08:15:54 +02:00
Linus Torvalds c131009987 random32: remove net_rand_state from the latent entropy gcc plugin
commit 83bdc7275e upstream.

It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b ("random32: update the net random state on interrupt
and activity").

This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:34:01 +02:00
Willy Tarreau c15a77bdda random32: update the net random state on interrupt and activity
commit f227e3ec3b upstream.

This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.

Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.

In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state.  For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.

Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:34:01 +02:00
Aditya Pakki 8dba9173a3 test_objagg: Fix potential memory leak in error handling
[ Upstream commit a6379f0ad6 ]

In case of failure of check_expect_hints_stats(), the resources
allocated by objagg_hints_get should be freed. The patch fixes
this issue.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30 15:37:04 -04:00
Jann Horn b7ce2e4538 lib/zlib: remove outdated and incorrect pre-increment optimization
[ Upstream commit acaab7335b ]

The zlib inflate code has an old micro-optimization based on the
assumption that for pre-increment memory accesses, the compiler will
generate code that fits better into the processor's pipeline than what
would be generated for post-increment memory accesses.

This optimization was already removed in upstream zlib in 2016:
https://github.com/madler/zlib/commit/9aaec95e8211

This optimization causes UB according to C99, which says in section 6.5.6
"Additive operators": "If both the pointer operand and the result point to
elements of the same array object, or one past the last element of the
array object, the evaluation shall not produce an overflow; otherwise, the
behavior is undefined".

This UB is not only a theoretical concern, but can also cause trouble for
future work on compiler-based sanitizers.

According to the zlib commit, this optimization also is not optimal
anymore with modern compilers.

Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the
POSTINC case, and remove the macro definitions, just like in the upstream
patch.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Link: http://lkml.kernel.org/r/20200507123112.252723-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24 17:50:39 +02:00
Daniel Axtens d6c2b4d246 kasan: stop tests being eliminated as dead code with FORTIFY_SOURCE
[ Upstream commit adb72ae191 ]

Patch series "Fix some incompatibilites between KASAN and FORTIFY_SOURCE", v4.

3 KASAN self-tests fail on a kernel with both KASAN and FORTIFY_SOURCE:
memchr, memcmp and strlen.

When FORTIFY_SOURCE is on, a number of functions are replaced with
fortified versions, which attempt to check the sizes of the operands.
However, these functions often directly invoke __builtin_foo() once they
have performed the fortify check.  The compiler can detect that the
results of these functions are not used, and knows that they have no other
side effects, and so can eliminate them as dead code.

Why are only memchr, memcmp and strlen affected?
================================================

Of string and string-like functions, kasan_test tests:

 * strchr  ->  not affected, no fortified version
 * strrchr ->  likewise
 * strcmp  ->  likewise
 * strncmp ->  likewise

 * strnlen ->  not affected, the fortify source implementation calls the
               underlying strnlen implementation which is instrumented, not
               a builtin

 * strlen  ->  affected, the fortify souce implementation calls a __builtin
               version which the compiler can determine is dead.

 * memchr  ->  likewise
 * memcmp  ->  likewise

 * memset ->   not affected, the compiler knows that memset writes to its
	       first argument and therefore is not dead.

Why does this not affect the functions normally?
================================================

In string.h, these functions are not marked as __pure, so the compiler
cannot know that they do not have side effects.  If relevant functions are
marked as __pure in string.h, we see the following warnings and the
functions are elided:

lib/test_kasan.c: In function `kasan_memchr':
lib/test_kasan.c:606:2: warning: statement with no effect [-Wunused-value]
  memchr(ptr, '1', size + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_kasan.c: In function `kasan_memcmp':
lib/test_kasan.c:622:2: warning: statement with no effect [-Wunused-value]
  memcmp(ptr, arr, size+1);
  ^~~~~~~~~~~~~~~~~~~~~~~~
lib/test_kasan.c: In function `kasan_strings':
lib/test_kasan.c:645:2: warning: statement with no effect [-Wunused-value]
  strchr(ptr, '1');
  ^~~~~~~~~~~~~~~~
...

This annotation would make sense to add and could be added at any point,
so the behaviour of test_kasan.c should change.

The fix
=======

Make all the functions that are pure write their results to a global,
which makes them live.  The strlen and memchr tests now pass.

The memcmp test still fails to trigger, which is addressed in the next
patch.

[dja@axtens.net: drop patch 3]
  Link: http://lkml.kernel.org/r/20200424145521.8203-2-dja@axtens.net
Fixes: 0c96350a2d ("lib/test_kasan.c: add tests for several string/memory API functions")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Link: http://lkml.kernel.org/r/20200423154503.5103-1-dja@axtens.net
Link: http://lkml.kernel.org/r/20200423154503.5103-2-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22 09:31:12 +02:00
Nathan Chancellor 338ff29604 lib/mpi: Fix 64-bit MIPS build with Clang
[ Upstream commit 18f1ca4685 ]

When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and
CONFIG_CRYPTO_RSA enabled:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w0))
                         ~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w1))
                         ~~~~~~~~~~^~~
2 errors generated.

This special case for umul_ppmm for MIPS64r6 was added in
commit bbc25bee37 ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to
GCC being inefficient and emitting a __multi3 intrinsic.

There is no such issue with clang; with this patch applied, I can build
this configuration without any problems and there are no link errors
like mentioned in the commit above (which I can still reproduce with
GCC 9.3.0 when that commit is reverted). Only use this definition when
GCC is being used.

This really should have been caught by commit b0c091ae04 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing
around in this area but I was not testing 64-bit MIPS at the time.

Link: https://github.com/ClangBuiltLinux/linux/issues/885
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22 09:31:00 +02:00
Dave Rodgman d4904b38ea lib/lzo: fix ambiguous encoding bug in lzo-rle
commit b5265c813c upstream.

In some rare cases, for input data over 32 KB, lzo-rle could encode two
different inputs to the same compressed representation, so that
decompression is then ambiguous (i.e.  data may be corrupted - although
zram is not affected because it operates over 4 KB pages).

This modifies the compressor without changing the decompressor or the
bitstream format, such that:

 - there is no change to how data produced by the old compressor is
   decompressed

 - an old decompressor will correctly decode data from the updated
   compressor

 - performance and compression ratio are not affected

 - we avoid introducing a new bitstream format

In testing over 12.8M real-world files totalling 903 GB, three files
were affected by this bug.  I also constructed 37M semi-random 64 KB
files totalling 2.27 TB, and saw no affected files.  Finally I tested
over files constructed to contain each of the ~1024 possible bad input
sequences; for all of these cases, updated lzo-rle worked correctly.

There is no significant impact to performance or compression ratio.

Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Rodgman <dave.rodgman@arm.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200507100203.29785-1-dave.rodgman@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17 16:40:28 +02:00
Ilya Dryomov 0e1d5f6725 vsprintf: don't obfuscate NULL and error pointers
commit 7bd57fbc4a upstream.

I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK.  Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0.  Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.

The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9c ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2.  I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO().  Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.

Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.

Example output with the patch applied:

                             ptr         error-ptr              NULL
 %p:            0000000001f8cc5b  fffffffffffffff2  0000000000000000
 %pK, kptr = 0: 0000000001f8cc5b  fffffffffffffff2  0000000000000000
 %px:           ffff888048c04020  fffffffffffffff2  0000000000000000
 %pK, kptr = 1: ffff888048c04020  fffffffffffffff2  0000000000000000
 %pK, kptr = 2: 0000000000000000  0000000000000000  0000000000000000

Fixes: 3e5903eb9c ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27 17:46:43 +02:00
Tuowen Zhao 78b19f56b9 lib: devres: add a helper function for ioremap_uc
[ Upstream commit e537654b70 ]

Implement a resource managed strongly uncachable ioremap function.

Cc: <stable@vger.kernel.org> # v4.19+
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Tuowen Zhao <ztuowen@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10 10:31:30 +02:00
Nathan Chancellor 07fea3d3ef lib/mpi: Fix building for powerpc with clang
[ Upstream commit 5990cdee68 ]

0day reports over and over on an powerpc randconfig with clang:

lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions

Remove the superfluous casts, which have been done previously for x86
and arm32 in commit dea632cadd ("lib/mpi: fix build with clang") and
commit 7b7c1df288 ("lib/mpi/longlong.h: fix building with 32-bit
x86").

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/991
Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10 10:31:28 +02:00
Masahiro Yamada 8652254e96 lib/raid6/test: fix build on distros whose /bin/sh is not bash
[ Upstream commit 06bd48b6cd ]

You can build a user-space test program for the raid6 library code,
like this:

  $ cd lib/raid6/test
  $ make

The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)

Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)

This does not work on Ubuntu where /bin/sh is a symbolic link to dash.

I see lots of

  /bin/sh: 1: Syntax error: Bad fd number

and

  warning "your version of binutils lacks ... support"

Replace it with portable '>/dev/null 2>&1'.

Fixes: 4f8c55c5ad ("lib/raid6: build proper files on corresponding arch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29 16:33:00 +02:00
Slava Bacherikov aea3873fb0 kbuild, btf: Fix dependencies for DEBUG_INFO_BTF
commit 7d32e69310 upstream.

Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also
enabled will produce invalid btf file, since gen_btf function in
link-vmlinux.sh script doesn't handle *.dwo files.

Enabling DEBUG_INFO_REDUCED will also produce invalid btf file,
and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense.

Fixes: e83b9f5544 ("kbuild: add ability to generate BTF type info for vmlinux")
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Signed-off-by: Slava Bacherikov <slava@bacher09.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200402204138.408021-1-slava@bacher09.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23 10:36:18 +02:00
Matthew Wilcox (Oracle) 07378b0991 xarray: Fix early termination of xas_for_each_marked
commit 7e934cf5ac upstream.

xas_for_each_marked() is using entry == NULL as a termination condition
of the iteration. When xas_for_each_marked() is used protected only by
RCU, this can however race with xas_store(xas, NULL) in the following
way:

TASK1                                   TASK2
page_cache_delete()         	        find_get_pages_range_tag()
                                          xas_for_each_marked()
                                            xas_find_marked()
                                              off = xas_find_chunk()

  xas_store(&xas, NULL)
    xas_init_marks(&xas);
    ...
    rcu_assign_pointer(*slot, NULL);
                                              entry = xa_entry(off);

And thus xas_for_each_marked() terminates prematurely possibly leading
to missed entries in the iteration (translating to missing writeback of
some pages or a similar problem).

If we find a NULL entry that has been marked, skip it (unless we're trying
to allocate an entry).

Reported-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
Fixes: ef8e5717db ("page cache: Convert delete_batch to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17 10:50:18 +02:00
Matthew Wilcox (Oracle) 8f4c8e92bd XArray: Fix xas_pause for large multi-index entries
commit c36d451ad3 upstream.

Inspired by the recent Coverity report, I looked for other places where
the offset wasn't being converted to an unsigned long before being
shifted, and I found one in xas_pause() when the entry being paused is
of order >32.

Fixes: b803b42823 ("xarray: Add XArray iterators")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17 10:50:18 +02:00
Yury Norov 8b0f080366 uapi: rename ext2_swab() to swab() and share globally in swab.h
commit d5767057c9 upstream.

ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.

There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h

ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.

Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13 10:48:07 +02:00
Matthew Wilcox (Oracle) 16696ee7b5 XArray: Fix xa_find_next for large multi-index entries
[ Upstream commit bd40b17ca4 ]

Coverity pointed out that xas_sibling() was shifting xa_offset without
promoting it to an unsigned long first, so the shift could cause an
overflow and we'd get the wrong answer.  The fix is obvious, and the
new test-case provokes UBSAN to report an error:
runtime error: shift exponent 60 is too large for 32-bit type 'int'

Fixes: 19c30f4dd0 ("XArray: Fix xa_find_after with multi-index entries")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08 09:08:40 +02:00
Masahiro Yamada ecd77a3261 kbuild: move headers_check rule to usr/include/Makefile
commit 7ecaf069da upstream.

Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.

It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05 16:43:47 +01:00
Alexander Potapenko 9bb971b335 lib/stackdepot.c: fix global out-of-bounds in stack_slabs
commit 305e519ce4 upstream.

Walter Wu has reported a potential case in which init_stack_slab() is
called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been
initialized.  In that case init_stack_slab() will overwrite
stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory
corruption.

Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com
Fixes: cd11016e5f ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28 17:22:20 +01:00
Nathan Chancellor 23b88b51de lib/scatterlist.c: adjust indentation in __sg_alloc_table
[ Upstream commit 4e456fee21 ]

Clang warns:

  ../lib/scatterlist.c:314:5: warning: misleading indentation; statement
  is not part of the previous 'if' [-Wmisleading-indentation]
                          return -ENOMEM;
                          ^
  ../lib/scatterlist.c:311:4: note: previous statement is here
                          if (prv)
                          ^
  1 warning generated.

This warning occurs because there is a space before the tab on this
line.  Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/830
Fixes: edce6820a9 ("scatterlist: prevent invalid free when alloc fails")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24 08:37:00 +01:00
Marco Elver 84255fe86d debugobjects: Fix various data races
[ Upstream commit 35fd7a637c ]

The counters obj_pool_free, and obj_nr_tofree, and the flag obj_freeing are
read locklessly outside the pool_lock critical sections. If read with plain
accesses, this would result in data races.

This is addressed as follows:

 * reads outside critical sections become READ_ONCE()s (pairing with
   WRITE_ONCE()s added);

 * writes become WRITE_ONCE()s (pairing with READ_ONCE()s added); since
   writes happen inside critical sections, only the write and not the read
   of RMWs needs to be atomic, thus WRITE_ONCE(var, var +/- X) is
   sufficient.

The data races were reported by KCSAN:

  BUG: KCSAN: data-race in __free_object / fill_pool

  write to 0xffffffff8beb04f8 of 4 bytes by interrupt on cpu 1:
   __free_object+0x1ee/0x8e0 lib/debugobjects.c:404
   __debug_check_no_obj_freed+0x199/0x330 lib/debugobjects.c:969
   debug_check_no_obj_freed+0x3c/0x44 lib/debugobjects.c:994
   slab_free_hook mm/slub.c:1422 [inline]

  read to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 2:
   fill_pool+0x3d/0x520 lib/debugobjects.c:135
   __debug_object_init+0x3c/0x810 lib/debugobjects.c:536
   debug_object_init lib/debugobjects.c:591 [inline]
   debug_object_activate+0x228/0x320 lib/debugobjects.c:677
   debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]

  BUG: KCSAN: data-race in __debug_object_init / fill_pool

  read to 0xffffffff8beb04f8 of 4 bytes by task 10 on cpu 6:
   fill_pool+0x3d/0x520 lib/debugobjects.c:135
   __debug_object_init+0x3c/0x810 lib/debugobjects.c:536
   debug_object_init_on_stack+0x39/0x50 lib/debugobjects.c:606
   init_timer_on_stack_key kernel/time/timer.c:742 [inline]

  write to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 3:
   alloc_object lib/debugobjects.c:258 [inline]
   __debug_object_init+0x717/0x810 lib/debugobjects.c:544
   debug_object_init lib/debugobjects.c:591 [inline]
   debug_object_activate+0x228/0x320 lib/debugobjects.c:677
   debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]

  BUG: KCSAN: data-race in free_obj_work / free_object

  read to 0xffffffff9140c190 of 4 bytes by task 10 on cpu 6:
   free_object+0x4b/0xd0 lib/debugobjects.c:426
   debug_object_free+0x190/0x210 lib/debugobjects.c:824
   destroy_timer_on_stack kernel/time/timer.c:749 [inline]

  write to 0xffffffff9140c190 of 4 bytes by task 93 on cpu 1:
   free_obj_work+0x24f/0x480 lib/debugobjects.c:313
   process_one_work+0x454/0x8d0 kernel/workqueue.c:2264
   worker_thread+0x9a/0x780 kernel/workqueue.c:2410

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200116185529.11026-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24 08:36:52 +01:00
Zhengyuan Liu a922fa72a8 raid6/test: fix a compilation warning
[ Upstream commit 5e5ac01c2b ]

The compilation warning is redefination showed as following:

        In file included from tables.c:2:
        ../../../include/linux/export.h:180: warning: "EXPORT_SYMBOL" redefined
         #define EXPORT_SYMBOL(sym)  __EXPORT_SYMBOL(sym, "")

        In file included from tables.c:1:
        ../../../include/linux/raid/pq.h:61: note: this is the location of the previous definition
         #define EXPORT_SYMBOL(sym)

Fixes: 69a94abb82 ("export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols")
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24 08:36:47 +01:00
Gustavo A. R. Silva db165906ca lib/test_kasan.c: fix memory leak in kmalloc_oob_krealloc_more()
commit 3e21d9a501 upstream.

In case memory resources for _ptr2_ were allocated, release them before
return.

Notice that in case _ptr1_ happens to be NULL, krealloc() behaves
exactly like kmalloc().

Addresses-Coverity-ID: 1490594 ("Resource leak")
Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor
Fixes: 3f15801cdc ("lib: add kasan test module")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11 04:35:14 -08:00
Matthew Wilcox (Oracle) 08022255a9 XArray: Fix xas_pause at ULONG_MAX
[ Upstream commit 82a22311b7 ]

If we were unlucky enough to call xas_pause() when the index was at
ULONG_MAX (or a multi-slot entry which ends at ULONG_MAX), we would
wrap the index back around to 0 and restart the iteration from the
beginning.  Use the XAS_BOUNDS state to indicate that we should just
stop the iteration.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05 21:22:47 +00:00
Christophe Leroy 9f6216862a lib: Reduce user_access_begin() boundaries in strncpy_from_user() and strnlen_user()
commit ab10ae1c3b upstream.

The range passed to user_access_begin() by strncpy_from_user() and
strnlen_user() starts at 'src' and goes up to the limit of userspace
although reads will be limited by the 'count' param.

On 32 bits powerpc (book3s/32) access has to be granted for each
256Mbytes segment and the cost increases with the number of segments to
unlock.

Limit the range with 'count' param.

Fixes: 594cc251fd ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29 16:45:29 +01:00
Matthew Wilcox (Oracle) dd05cf12c7 XArray: Fix xas_find returning too many entries
commit c44aa5e8ab upstream.

If you call xas_find() with the initial index > max, it should have
returned NULL but was returning the entry at index.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29 16:45:27 +01:00
Matthew Wilcox (Oracle) db38561288 XArray: Fix xa_find_after with multi-index entries
commit 19c30f4dd0 upstream.

If the entry is of an order which is a multiple of XA_CHUNK_SIZE,
the current detection of sibling entries does not work.  Factor out
an xas_sibling() function to make xa_find_after() a little more
understandable, and write a new implementation that doesn't suffer from
the same bug.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29 16:45:26 +01:00
Matthew Wilcox (Oracle) a5135ca1f9 XArray: Fix infinite loop with entry at ULONG_MAX
commit 430f24f94c upstream.

If there is an entry at ULONG_MAX, xa_for_each() will overflow the
'index + 1' in xa_find_after() and wrap around to 0.  Catch this case
and terminate the loop by returning NULL.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29 16:45:26 +01:00
David Jeffery dba0d9caa6 sbitmap: only queue kyber's wait callback if not already active
[ Upstream commit df034c93f1 ]

Under heavy loads where the kyber I/O scheduler hits the token limits for
its scheduling domains, kyber can become stuck.  When active requests
complete, kyber may not be woken up leaving the I/O requests in kyber
stuck.

This stuck state is due to a race condition with kyber and the sbitmap
functions it uses to run a callback when enough requests have completed.
The running of a sbt_wait callback can race with the attempt to insert the
sbt_wait.  Since sbitmap_del_wait_queue removes the sbt_wait from the list
first then sets the sbq field to NULL, kyber can see the item as not on a
list but the call to sbitmap_add_wait_queue will see sbq as non-NULL. This
results in the sbt_wait being inserted onto the wait list but ws_active
doesn't get incremented.  So the sbitmap queue does not know there is a
waiter on a wait list.

Since sbitmap doesn't think there is a waiter, kyber may never be
informed that there are domain tokens available and the I/O never advances.
With the sbt_wait on a wait list, kyber believes it has an active waiter
so cannot insert a new waiter when reaching the domain's full state.

This race can be fixed by only adding the sbt_wait to the queue if the
sbq field is NULL.  If sbq is not NULL, there is already an action active
which will trigger the re-running of kyber.  Let it run and add the
sbt_wait to the wait list if still needing to wait.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reported-by: John Pittman <jpittman@redhat.com>
Tested-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12 12:21:44 +01:00
Julien Grall 735e7a12a6 lib/ubsan: don't serialize UBSAN report
[ Upstream commit ce5c31db36 ]

At the moment, UBSAN report will be serialized using a spin_lock().  On
RT-systems, spinlocks are turned to rt_spin_lock and may sleep.  This
will result to the following splat if the undefined behavior is in a
context that can sleep:

  BUG: sleeping function called from invalid context at /src/linux/kernel/locking/rtmutex.c:968
  in_atomic(): 1, irqs_disabled(): 128, pid: 3447, name: make
  1 lock held by make/3447:
   #0: 000000009a966332 (&mm->mmap_sem){++++}, at: do_page_fault+0x140/0x4f8
  irq event stamp: 6284
  hardirqs last  enabled at (6283): [<ffff000011326520>] _raw_spin_unlock_irqrestore+0x90/0xa0
  hardirqs last disabled at (6284): [<ffff0000113262b0>] _raw_spin_lock_irqsave+0x30/0x78
  softirqs last  enabled at (2430): [<ffff000010088ef8>] fpsimd_restore_current_state+0x60/0xe8
  softirqs last disabled at (2427): [<ffff000010088ec0>] fpsimd_restore_current_state+0x28/0xe8
  Preemption disabled at:
  [<ffff000011324a4c>] rt_mutex_futex_unlock+0x4c/0xb0
  CPU: 3 PID: 3447 Comm: make Tainted: G        W         5.2.14-rt7-01890-ge6e057589653 #911
  Call trace:
    dump_backtrace+0x0/0x148
    show_stack+0x14/0x20
    dump_stack+0xbc/0x104
    ___might_sleep+0x154/0x210
    rt_spin_lock+0x68/0xa0
    ubsan_prologue+0x30/0x68
    handle_overflow+0x64/0xe0
    __ubsan_handle_add_overflow+0x10/0x18
    __lock_acquire+0x1c28/0x2a28
    lock_acquire+0xf0/0x370
    _raw_spin_lock_irqsave+0x58/0x78
    rt_mutex_futex_unlock+0x4c/0xb0
    rt_spin_unlock+0x28/0x70
    get_page_from_freelist+0x428/0x2b60
    __alloc_pages_nodemask+0x174/0x1708
    alloc_pages_vma+0x1ac/0x238
    __handle_mm_fault+0x4ac/0x10b0
    handle_mm_fault+0x1d8/0x3b0
    do_page_fault+0x1c8/0x4f8
    do_translation_fault+0xb8/0xe0
    do_mem_abort+0x3c/0x98
    el0_da+0x20/0x24

The spin_lock() will protect against multiple CPUs to output a report
together, I guess to prevent them from being interleaved.  However, they
can still interleave with other messages (and even splat from
__might_sleep).

So the lock usefulness seems pretty limited.  Rather than trying to
accomodate RT-system by switching to a raw_spin_lock(), the lock is now
completely dropped.

Link: http://lkml.kernel.org/r/20190920100835.14999-1-julien.grall@arm.com
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09 10:20:07 +01:00
Peter Zijlstra 39303579eb ubsan, x86: Annotate and allow __ubsan_handle_shift_out_of_bounds() in uaccess regions
[ Upstream commit 9a50dcaf04 ]

The new check_zeroed_user() function uses variable shifts inside of a
user_access_begin()/user_access_end() section and that results in GCC
emitting __ubsan_handle_shift_out_of_bounds() calls, even though
through value range analysis it would be able to see that the UB in
question is impossible.

Annotate and whitelist this UBSAN function; continued use of
user_access_begin()/user_access_end() will undoubtedly result in
further uses of function.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cyphar@cyphar.com
Cc: keescook@chromium.org
Cc: linux@rasmusvillemoes.dk
Fixes: f5a1a536fa ("lib: introduce copy_struct_from_user() helper")
Link: https://lkml.kernel.org/r/20191021131149.GA19358@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31 16:44:25 +01:00
Greg Kroah-Hartman 9b7935f72f lib: raid6: fix awk build warnings
commit 702600eef7 upstream.

Newer versions of awk spit out these fun warnings:
	awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator

As commit 700c1018b8 ("x86/insn: Fix awk regexp warnings") showed, it
turns out that there are a number of awk strings that do not need to be
escaped and newer versions of awk now warn about this.

Fix the string up so that no warning is produced.  The exact same kernel
module gets created before and after this patch, showing that it wasn't
needed.

Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17 19:56:09 +01:00