Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a
SKB if the BD num required by the SKB does not meet the hardware
limitation, and it linearizes the SKB by allocating a new linearized SKB
and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY
because there are no enough space in the ring to send the linearized
skb to hardware, the sch_direct_xmit() still hold reference to old SKB
and try to retransmit the old SKB when dev_hard_start_xmit() return
TX_BUSY, which may cause use after freed problem.
This patch fixes it by using __skb_linearize() to linearize the
SKB in hns3_nic_maybe_stop_tx().
Fixes: 51e8439f34 ("net: hns3: add 8 BD limit for tx flow")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is timing window between ring_space checking and
netif_stop_subqueue when transmiting a SKB, and the TX BD
cleaning may be executed during the time window, which may
caused TX queue not restarted problem.
This patch fixes it by rechecking the ring_space after
netif_stop_subqueue to make sure TX queue is restarted.
Also, the ring->next_to_clean is updated even when pkts is
zero, because all the TX BD cleaned may be non-SKB, so it
needs to check if TX queue need to be restarted.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace "select NET_SWITCHDEV" vs "depends on NET_SWITCHDEV" to fix Kconfig
warning with CONFIG_COMPILE_TEST=y
WARNING: unmet direct dependencies detected for NET_SWITCHDEV
Depends on [n]: NET [=y] && INET [=n]
Selected by [y]:
- TI_CPSW_SWITCHDEV [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && (ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST [=y])
because TI_CPSW_SWITCHDEV blindly selects NET_SWITCHDEV even though
INET is not set/enabled, while NET_SWITCHDEV depends on INET.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: ed3525eda4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
Bob's extensive filesystem withdrawal and recovery testing:
- Don't write log headers after file system withdraw
- clean up iopen glock mess in gfs2_create_inode
- Close timing window with GLF_INVALIDATE_IN_PROGRESS
- Abort gfs2_freeze if io error is seen
- Don't loop forever in gfs2_freeze if withdrawn
- fix infinite loop in gfs2_ail1_flush on io error
- Introduce function gfs2_withdrawn
- fix glock reference problem in gfs2_trans_remove_revoke
Filesystems with a block size smaller than the page size:
- Fix end-of-file handling in gfs2_page_mkwrite
- Improve mmap write vs. punch_hole consistency
Other:
- Remove active journal side effect from gfs2_write_log_header
- Multi-block allocations in gfs2_page_mkwrite
Minor cleanups and coding style fixes:
- Remove duplicate call from gfs2_create_inode
- make gfs2_log_shutdown static
- make gfs2_fs_parameters static
- Some whitespace cleanups
- removed unnecessary semicolon
-----BEGIN PGP SIGNATURE-----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=b1m/
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Andreas Gruenbacher:
"Bob's extensive filesystem withdrawal and recovery testing:
- don't write log headers after file system withdraw
- clean up iopen glock mess in gfs2_create_inode
- close timing window with GLF_INVALIDATE_IN_PROGRESS
- abort gfs2_freeze if io error is seen
- don't loop forever in gfs2_freeze if withdrawn
- fix infinite loop in gfs2_ail1_flush on io error
- introduce function gfs2_withdrawn
- fix glock reference problem in gfs2_trans_remove_revoke
Filesystems with a block size smaller than the page size:
- fix end-of-file handling in gfs2_page_mkwrite
- improve mmap write vs. punch_hole consistency
Other:
- remove active journal side effect from gfs2_write_log_header
- multi-block allocations in gfs2_page_mkwrite
Minor cleanups and coding style fixes:
- remove duplicate call from gfs2_create_inode
- make gfs2_log_shutdown static
- make gfs2_fs_parameters static
- some whitespace cleanups
- removed unnecessary semicolon"
* tag 'gfs2-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't write log headers after file system withdraw
gfs2: Remove duplicate call from gfs2_create_inode
gfs2: clean up iopen glock mess in gfs2_create_inode
gfs2: Close timing window with GLF_INVALIDATE_IN_PROGRESS
gfs2: Abort gfs2_freeze if io error is seen
gfs2: Don't loop forever in gfs2_freeze if withdrawn
gfs2: fix infinite loop in gfs2_ail1_flush on io error
gfs2: Introduce function gfs2_withdrawn
gfs2: fix glock reference problem in gfs2_trans_remove_revoke
gfs2: make gfs2_log_shutdown static
gfs2: Remove active journal side effect from gfs2_write_log_header
gfs2: Fix end-of-file handling in gfs2_page_mkwrite
gfs2: Multi-block allocations in gfs2_page_mkwrite
gfs2: Improve mmap write vs. punch_hole consistency
gfs2: make gfs2_fs_parameters static
gfs2: Some whitespace cleanups
gfs2: removed unnecessary semicolon
This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
mappings are handled and a conversion to the new mount API (slightly
complicated by the fact that we had a common option parsing framework
that called out into rbd and the filesystem instead of them calling
into it). Also included a few scattered fixes and a MAINTAINERS update
for rbd, adding Dongsheng as a reviewer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl3oDqwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8/OCACAhPEoSkG8J0XOgP0NlFQGRvikugKq
wlUfpNhkJOVmyM1t9LgiHHirTa7/kA76wPo/iHtnvjIZuZoaX3+NoZX5DwgKVCo1
SCQdXR4ohVPiYxUpK+z/fDXxpYHhaO2SAww+RRHSDxnlN5CHqFBcBhRBPfhraZT5
dwiQt7++UOnp/hfk1Dqg5EogmSdLxqWyjClKf2lliZkzbU9YXmGapqQsur6sBk+e
cLRmRBmMw4cDAKLL1taCympN0AxNMcePs1njvdwQ7XabNWrT061yFyt1ZNwAV/Nu
0nCyh/9IwQcsR0EvK7FCdUEJPy88Reufd+GleS4nkEZpbxQBzo0aGow0
=Egtk
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The two highlights are a set of improvements to how rbd read-only
mappings are handled and a conversion to the new mount API (slightly
complicated by the fact that we had a common option parsing framework
that called out into rbd and the filesystem instead of them calling
into it).
Also included a few scattered fixes and a MAINTAINERS update for rbd,
adding Dongsheng as a reviewer"
* tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client:
libceph, rbd, ceph: convert to use the new mount API
rbd: ask for a weaker incompat mask for read-only mappings
rbd: don't query snapshot features
rbd: remove snapshot existence validation code
rbd: don't establish watch for read-only mappings
rbd: don't acquire exclusive lock for read-only mappings
rbd: disallow read-write partitions on images mapped read-only
rbd: treat images mapped read-only seriously
rbd: introduce RBD_DEV_FLAG_READONLY
rbd: introduce rbd_is_snap()
ceph: don't leave ino field in ceph_mds_request_head uninitialized
ceph: tone down loglevel on ceph_mdsc_build_path warning
rbd: update MAINTAINERS info
ceph: fix geting random mds from mdsmap
rbd: fix spelling mistake "requeueing" -> "requeuing"
ceph: make several helper accessors take const pointers
libceph: drop unnecessary check from dispatch() in mon_client.c
In cited commit, when prio tag mode is enabled, FTE creation fails
due to missing group with valid match criteria.
Hence,
(a) create prio tag group metadata_prio_tag_grp when prio tag is
enabled with match criteria for vlan push FTE.
(b) Rename metadata_grp to metadata_allmatch_grp to reflect its purpose.
Also when priority tag is enabled, delete metadata settings after
deleting ingress rules, which are using it.
Tide up rest of the ingress config code for unnecessary labels.
Fixes: 10652f3994 ("net/mlx5: Refactor ingress acl configuration")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When setting speed to 100G via ethtool (AN is set to off), only 25G*4 is
configured while the user, who has an advanced HW which supports
extended PTYS, expects also 50G*2 to be configured.
With this patch, when extended PTYS mode is available, configure
PTYS via extended fields.
Fixes: 4b95840a6c ("net/mlx5e: Fix matching of speed to PRM link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add a missing value in translation of PTYS ext_eth_proto_oper to its
corresponding speed. When ext_eth_proto_oper bit 10 is set, ethtool
shows unknown speed. With this fix, ethtool shows speed is 100G as
expected.
Fixes: a08b4ed137 ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
It could be neigh update flow took a refcount on peer flow so
sometimes we cannot release peer flow even if parent flow is
being freed now.
Fixes: 5a7e5bcb66 ("net/mlx5e: Extend tc flow struct with reference counter")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Flows are allocated with kzalloc() so free with kfree().
Fixes: 04de7dda73 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
SFF 8472 eeprom length is 512 bytes. Fix module info return value to
support 512 bytes read.
Fixes: ace329f4ab ("net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When the user changes prio2buffer mapping while global pause is
enabled, mlx5 driver incorrectly sets all active buffers
(buffer that has at least one priority mapped) to lossy.
Solution:
If global pause is enabled, set all the active buffers to lossless
in prio2buffer command.
Also, add error message when buffer size is not enough to meet
xoff threshold.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Cited patch changed (channel index, tc) => (TXQ index) mapping to be a
static one, in order to keep indices consistent when changing number of
channels or TCs.
For 32 channels (OOB) and 8 TCs, real num of TXQs is 256.
When reducing the amount of channels to 8, the real num of TXQs will be
changed to 64.
This indices method is buggy:
- Channel #0, TC 3, the TXQ index is 96.
- Index 8 is not valid, as there is no such TXQ from driver perspective
(As it represents channel #8, TC 0, which is not valid with the above
configuration).
As part of driver's select queue, it calls netdev_pick_tx which returns an
index in the range of real number of TXQs. Depends on the return value,
with the examples above, driver could have returned index larger than the
real number of tx queues, or crash the kernel as it tries to read invalid
address of SQ which was not allocated.
Fix that by allocating sequential TXQ indices, and hold a new mapping
between (channel index, tc) => (real TXQ index). This mapping will be
updated as part of priv channels activation, and is used in
mlx5e_select_queue to find the selected queue index.
The existing indices mapping (channel_tc2txq) is no longer needed, as it
is used only for statistics structures and can be calculated on run time.
Delete its definintion and updates.
Fixes: 8bfaf07f78 ("net/mlx5e: Present SW stats when state is not opened")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXedyjQAKCRDh3BK/laaZ
PCR7AQCf+bb3/so1bygFeblBTT4UZbYZRXz2nZNSA5tgJvafWwD+I4MlqR+tEixb
gZEusbtAVrtm3hJrBc+1fA1wacGhmAg=
=Jg/0
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
- Fix a regression introduced in the last release
- Fix a number of issues with validating data coming from userspace
- Some cleanups in virtiofs
* tag 'fuse-update-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix Kconfig indentation
fuse: fix leak of fuse_io_priv
virtiofs: Use completions while waiting for queue to be drained
virtiofs: Do not send forget request "struct list_head" element
virtiofs: Use a common function to send forget
virtiofs: Fix old-style declaration
fuse: verify nlink
fuse: verify write return
fuse: verify attributes
Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable. The most
notable change is that no namespace is represented by an empty string ""
rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the same
module weren't being woken up when a module finally goes away.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XDci
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable.
The most notable change is that no namespace is represented by an
empty string "" rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the
same module weren't being woken up when a module finally goes away"
* tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel/module.c: wakeup processes in module_wq on module unload
moduleparam: fix parameter description mismatch
export: avoid code duplication in include/linux/export.h
Julian Wiedmann says:
====================
s390/qeth: fixes 2019-12-05
please apply the following fixes to your net tree.
The first two patches target the RX data path, the third fixes a memory
leak when shutting down a qeth device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The cio layer's intparm logic does not align itself well with how qeth
manages cmd IOs. When an active IO gets terminated via halt/clear, the
corresponding IRQ's intparm does not reflect the cmd buffer but rather
the intparm that was passed to ccw_device_halt() / ccw_device_clear().
This behaviour was recently clarified in
commit b91d9e67e5 ("s390/cio: fix intparm documentation").
As a result, qeth_irq() currently doesn't cancel a cmd that was
terminated via halt/clear. This primarily causes us to leak
card->read_cmd after the qeth device is removed, since our IO path still
holds a refcount for this cmd.
For qeth this means that we need to keep track of which IO is pending on
a device ('active_cmd'), and use this as the intparm when calling
halt/clear. Otherwise qeth_irq() can't match the subsequent IRQ to its
cmd buffer.
Since we now keep track of the _expected_ intparm, we can also detect
any mismatch; this would constitute a bug somewhere in the lower layers.
In this case cancel the active cmd - we effectively "lost" the IRQ and
should not expect any further notification for this IO.
Fixes: 405548959c ("s390/qeth: add support for dynamically allocated cmds")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the RX path builds non-linear skbs, the packet headers can
currently spill over into page fragments. Depending on the packet type
and what fields we need to access in the headers, this could cause us
to go past the end of skb->data.
So for non-linear packets, copy precisely the length of the necessary
headers ('linear_len') into skb->data.
And don't copy more, upper-level protocols will peel whatever additional
packet headers they need.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on a packet's type, the RX path needs to access fields in the
packet headers and thus requires a minimum packet length.
Enforce this length when building the skb.
On the other hand a single runt packet is no reason to drop the whole
RX buffer. So just skip it, and continue processing on the next packet.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull m68knommu update from Greg Ungerer:
"Only a single change, to enable coldfire preemption entry code for all
preemption types"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/coldfire: Use CONFIG_PREEMPTION
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl3pOsEPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3CvIP/1RkWP15mjNjhTH7NpNwnhh0PK8oxZpkkB3L
nTS0LHyM6yETQLxmaQv173u+zZ0cFkG4GgDng64flVxbVixJATjGN/YY4LyVv+wx
zztcB6Ix2SZRQita5I4maDnz456UmP77d6N/FSICk9wnigYGeHeWDqQjGQiB7Nud
M+3TSRRzarhnAJ1UnPg3n9W6ylnVvlC3nB5/SP2MlZpfJ4g5VvCNaExIYbl7aZ3c
utAubVP8udgD1L9DIRl9aIm8QU595Q3dngHD5HRhVeHFOhAgOPWw1Q74t7FQwm8G
BG/HT9qzZGiFZzn+Mdjfzz4OjtrbUonYNQ3IIgK16joXpepYmd3oREVUukAMiT8n
dKblSwVJNIB9oSJbc8GejK/OcIBigdCuzcvVZIblfjEtgMeUK4L1naJxJ8xRvZ0u
Avqd7DVaOK3FLAaU2FsIqSoc/OsscyvcT9eUOwkyfAFzcFZCUO4ufMbCrrWwA8kk
zN0ERs/3Je4XDSdt4/BSqd3iizY5itmti6GxSavkyz+by4h0ildnpBxWEoO4MyVt
PN5tYhBReNtiFzUQvTtr72dG2AVeLmeit9xfs60wE243mDSNfPcOAvWqQigO9wV6
5SyG87w3x4Zyzlurezi3VAS1lSyieFLqHnHOdB6BQFZlUW73W+nRPidKjFxs6j20
0HOICJ9E
=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
Since commit 2b3e88ea65 ("net: phy: improve phy state checking")
phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start()
before calling phy_start_aneg() during probe so that autonegotiation
is initiated.
As phy_start() takes care of calling phy_start_aneg(), drop the explicit
call to phy_start_aneg().
Network fails without this patch on Octeon TX.
Fixes: 2b3e88ea65 ("net: phy: improve phy state checking")
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----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=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Most of these are for MMP (seeing a bunch of cleanups and refactorings
for the first time in a while), and for OMAP (a bunch of cleanups and
added support for voltage controller on OMAP4430).
-----BEGIN PGP SIGNATURE-----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=Tga8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"Most of these are for MMP (seeing a bunch of cleanups and refactorings
for the first time in a while), and for OMAP (a bunch of cleanups and
added support for voltage controller on OMAP4430)"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
OMAP2: fixup doc comments in omap_device
ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED
ARM: imx: use generic function to exit coherency
ARM: tegra: Use WFE for power-gating on Tegra30
ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()
ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS
ARM: s3c: Rename s5p_usb_phy functions
ARM: s3c: Rename s3c64xx_spi_setname() function
ARM: imx: Add serial number support for i.MX6/7 SoCs
ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
arm64: Introduce config for S32
ARM: hisi: drop useless depend on ARCH_MULTI_V7
arm64: realtek: Select reset controller
ARM: shmobile: rcar-gen2: Drop legacy DT clock support
ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c
ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")
MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support
...
Various changes and minor fixes across a couple of drivers.
-----BEGIN PGP SIGNATURE-----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=Sd9F
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes and minor fixes across a couple of drivers"
* tag 'pwm/for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: stm32: Pass breakinput instead of its values
pwm: stm32: Remove clutter from ternary operator
pwm: stm32: Validate breakinput data from DT
pwm: Update comment on struct pwm_ops::apply
pwm: sun4i: Fix incorrect calculation of duty_cycle/period
pwm: stm32: Add power management support
pwm: stm32: Split breakinput apply routine to ease PM support
dt-bindings: pwm-stm32: Document pinctrl sleep state
pwm: sun4i: Drop redundant assignment to variable pval
dt-bindings: pwm: mediatek: Remove gratuitous compatible string for MT7629
Pull thermal management updates from Zhang Rui:
- Fix a deadlock regression in thermal core framework, which was
introduced in 5.3 (Wei Wang)
- Initialize thermal control framework earlier to enable thermal
mitigation during boot (Amit Kucheria)
- Convert the Intelligent Power Allocator (IPA) thermal governor to
follow the generic PM_EM instead of its own Energy Model (Quentin
Perret)
- Introduce a new Amlogic soc thermal driver (Guillaume La Roque)
- Add interrupt support for tsens thermal driver (Amit Kucheria)
- Add support for MSM8956/8976 in tsens thermal driver
(AngeloGioacchino Del Regno)
- Add support for r8a774b1 in rcar thermal driver (Biju Das)
- Add support for Thermal Monitor Unit v2 in qoriq thermal driver
(Yuantian Tang)
- Some other fixes/cleanups on thermal core framework and soc thermal
drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao)
* 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits)
thermal: Fix deadlock in thermal thermal_zone_device_check
thermal: cpu_cooling: Migrate to using the EM framework
thermal: cpu_cooling: Make the power-related code depend on IPA
PM / EM: Declare EM data types unconditionally
arm64: defconfig: Enable CONFIG_ENERGY_MODEL
drivers: thermal: tsens: fix potential integer overflow on multiply
thermal: cpu_cooling: Reorder the header file
thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF
thermal: no need to set .owner when using module_platform_driver
thermal: qcom: tsens-v1: Fix kfree of a non-pointer value
cpufreq: qcom-hw: Move driver initialization earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: Initialize cpufreq-dt driver earlier
cpufreq: Initialize the governors in core_initcall
thermal: Initialize thermal subsystem earlier
thermal: Remove netlink support
dt: thermal: tsens: Document compatible for MSM8976/56
thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976
MAINTAINERS: add entry for Amlogic Thermal driver
thermal: amlogic: Add thermal driver to support G12 SoCs
...
7c20f11680 ("bio-integrity: stop abusing bi_end_io") moves
bio_integrity_free from bio_uninit() to bio_integrity_verify_fn()
and bio_endio(). This way looks wrong because bio may be freed
without calling bio_endio(), for example, blk_rq_unprep_clone() is
called from dm_mq_queue_rq() when the underlying queue of dm-mpath
is busy.
So memory leak of bio integrity data is caused by commit 7c20f11680.
Fixes this issue by re-adding bio_integrity_free() to bio_uninit().
Fixes: 7c20f11680 ("bio-integrity: stop abusing bi_end_io")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by Justin Tee <justin.tee@broadcom.com>
Add commit log, and simplify/fix the original patch wroten by Justin.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The conversion to properties changed one assignment and
missed three other assignments in the same file, fix it
up so the platform compiles.
The bug was reported by a few build bots but noone noticed.
I noticed it when making other changes to the PXA platforms.
Link: https://lore.kernel.org/r/20191203104117.85517-1-linus.walleij@linaro.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 50ec88120e ("can: mcp251x: get rid of legacy platform data")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Yet another single fix to avoid double freeing in scmi_device_create
error path
-----BEGIN PGP SIGNATURE-----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=kDMl
-----END PGP SIGNATURE-----
Merge tag 'scmi-fix-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARM SCMI fix for v5.5
Yet another single fix to avoid double freeing in scmi_device_create
error path
* tag 'scmi-fix-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Avoid double free in error flow
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
Link: https://lore.kernel.org/r/20191202114559.GB20965@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
Couple of fixes:
1. Fix for UART clock frequency on all Juno variants that exist since
the platform was added. This is mainly due to incorrect Juno SoC
TRM that was referred during initial development days
2. Drop "dma-ranges" property for now as they are triggering loads of
warning on boot
-----BEGIN PGP SIGNATURE-----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=sF+m
-----END PGP SIGNATURE-----
Merge tag 'juno-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARMv8 Juno fixes for v5.5
Couple of fixes:
1. Fix for UART clock frequency on all Juno variants that exist since
the platform was added. This is mainly due to incorrect Juno SoC
TRM that was referred during initial development days
2. Drop "dma-ranges" property for now as they are triggering loads of
warning on boot
* tag 'juno-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
Revert "arm64: dts: juno: add dma-ranges property"
arm64: dts: juno: Fix UART frequency
arm64: dts: juno: add GPU subsystem
Link: https://lore.kernel.org/r/20191202114338.GA20965@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Stefan and Eric step down from doing BCM283x maintenance and Nicolas
replaces them both moving forward
-----BEGIN PGP SIGNATURE-----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=OIvZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/maintainers-part2' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains MAINTAINERS file updates for Broadcom SoCs,
please pull the following:
- Stefan and Eric step down from doing BCM283x maintenance and Nicolas
replaces them both moving forward
* tag 'arm-soc/for-5.5/maintainers-part2' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer
Link: https://lore.kernel.org/r/20191127191932.9711-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixup a issue was caused by the previous fixup patch.
Fixes: 1a92f98912 ("soc: mediatek: cmdq: reorder the parameter")
Link: https://lore.kernel.org/r/20191127165428.19662-1-matthias.bgg@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
snoop_file_poll() is defined as returning 'unsigned int' but the
.poll method is declared as returning '__poll_t', a bitwise type.
Fix this by using the proper return type and using the EPOLL
constants instead of the POLL ones, as required for __poll_t.
Link: https://lore.kernel.org/r/20191121051851.268726-1-joel@jms.id.au
Fixes: 3772e5da44 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
Switch all addresses from @cavium.com to @marvell.com.
On that occasion, switch also to my Marvell address for all my
Cavium/Marvell entries.
Link: https://lore.kernel.org/r/20191119190436.17875-3-rrichter@marvell.com
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: soc@kernel.org
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove my maintainer entries for ThunderX drivers as I'm moving on
and won't have access to ThunderX hardware anymore and add Robert.
Also remove the obsolete addresses of David Daney and Steven Hill.
Add an entry to .mailmap for my various email addresses.
Link: https://lore.kernel.org/r/20191119190436.17875-2-rrichter@marvell.com
Cc: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com>
Cc: soc@kernel.org
Signed-off-by: Jan Glauber <jglauber@marvell.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge more updates from Andrew Morton:
"Most of the rest of MM and various other things. Some Kconfig rework
still awaits merges of dependent trees from linux-next.
Subsystems affected by this patch series: mm/hotfixes, mm/memcg,
mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel,
bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov,
ubsan, ipc, bitmap, mm/pagemap"
* akpm: (86 commits)
mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h
um: add support for folded p4d page tables
um: remove unused pxx_offset_proc() and addr_pte() functions
sparc32: use pgtable-nopud instead of 4level-fixup
parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup
parisc: use pgtable-nopXd instead of 4level-fixup
nds32: use pgtable-nopmd instead of 4level-fixup
microblaze: use pgtable-nopmd instead of 4level-fixup
m68k: mm: use pgtable-nopXd instead of 4level-fixup
m68k: nommu: use pgtable-nopud instead of 4level-fixup
c6x: use pgtable-nopud instead of 4level-fixup
arm: nommu: use pgtable-nopud instead of 4level-fixup
alpha: use pgtable-nopud instead of 4level-fixup
gpio: pca953x: tighten up indentation
gpio: pca953x: convert to use bitmap API
gpio: pca953x: use input from regs structure in pca953x_irq_pending()
gpio: pca953x: remove redundant variable and check in IRQ handler
lib/bitmap: introduce bitmap_replace() helper
lib/test_bitmap: fix comment about this file
lib/test_bitmap: move exp1 and exp2 upper for others to use
...
This patch fixes the following KASAN report. The @ioend has been
freed by dio_put(), but the iomap_finish_ioend() still trys to access
its data.
[20563.631624] BUG: KASAN: use-after-free in iomap_finish_ioend+0x58c/0x5c0
[20563.638319] Read of size 8 at addr fffffc0c54a36928 by task kworker/123:2/22184
[20563.647107] CPU: 123 PID: 22184 Comm: kworker/123:2 Not tainted 5.4.0+ #1
[20563.653887] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
[20563.664499] Workqueue: xfs-conv/sda5 xfs_end_io [xfs]
[20563.669547] Call trace:
[20563.671993] dump_backtrace+0x0/0x370
[20563.675648] show_stack+0x1c/0x28
[20563.678958] dump_stack+0x138/0x1b0
[20563.682455] print_address_description.isra.9+0x60/0x378
[20563.687759] __kasan_report+0x1a4/0x2a8
[20563.691587] kasan_report+0xc/0x18
[20563.694985] __asan_report_load8_noabort+0x18/0x20
[20563.699769] iomap_finish_ioend+0x58c/0x5c0
[20563.703944] iomap_finish_ioends+0x110/0x270
[20563.708396] xfs_end_ioend+0x168/0x598 [xfs]
[20563.712823] xfs_end_io+0x1e0/0x2d0 [xfs]
[20563.716834] process_one_work+0x7f0/0x1ac8
[20563.720922] worker_thread+0x334/0xae0
[20563.724664] kthread+0x2c4/0x348
[20563.727889] ret_from_fork+0x10/0x18
[20563.732941] Allocated by task 83403:
[20563.736512] save_stack+0x24/0xb0
[20563.739820] __kasan_kmalloc.isra.9+0xc4/0xe0
[20563.744169] kasan_slab_alloc+0x14/0x20
[20563.747998] slab_post_alloc_hook+0x50/0xa8
[20563.752173] kmem_cache_alloc+0x154/0x330
[20563.756185] mempool_alloc_slab+0x20/0x28
[20563.760186] mempool_alloc+0xf4/0x2a8
[20563.763845] bio_alloc_bioset+0x2d0/0x448
[20563.767849] iomap_writepage_map+0x4b8/0x1740
[20563.772198] iomap_do_writepage+0x200/0x8d0
[20563.776380] write_cache_pages+0x8a4/0xed8
[20563.780469] iomap_writepages+0x4c/0xb0
[20563.784463] xfs_vm_writepages+0xf8/0x148 [xfs]
[20563.788989] do_writepages+0xc8/0x218
[20563.792658] __writeback_single_inode+0x168/0x18f8
[20563.797441] writeback_sb_inodes+0x370/0xd30
[20563.801703] wb_writeback+0x2d4/0x1270
[20563.805446] wb_workfn+0x344/0x1178
[20563.808928] process_one_work+0x7f0/0x1ac8
[20563.813016] worker_thread+0x334/0xae0
[20563.816757] kthread+0x2c4/0x348
[20563.819979] ret_from_fork+0x10/0x18
[20563.825028] Freed by task 22184:
[20563.828251] save_stack+0x24/0xb0
[20563.831559] __kasan_slab_free+0x10c/0x180
[20563.835648] kasan_slab_free+0x10/0x18
[20563.839389] slab_free_freelist_hook+0xb4/0x1c0
[20563.843912] kmem_cache_free+0x8c/0x3e8
[20563.847745] mempool_free_slab+0x20/0x28
[20563.851660] mempool_free+0xd4/0x2f8
[20563.855231] bio_free+0x33c/0x518
[20563.858537] bio_put+0xb8/0x100
[20563.861672] iomap_finish_ioend+0x168/0x5c0
[20563.865847] iomap_finish_ioends+0x110/0x270
[20563.870328] xfs_end_ioend+0x168/0x598 [xfs]
[20563.874751] xfs_end_io+0x1e0/0x2d0 [xfs]
[20563.878755] process_one_work+0x7f0/0x1ac8
[20563.882844] worker_thread+0x334/0xae0
[20563.886584] kthread+0x2c4/0x348
[20563.889804] ret_from_fork+0x10/0x18
[20563.894855] The buggy address belongs to the object at fffffc0c54a36900
which belongs to the cache bio-1 of size 248
[20563.906844] The buggy address is located 40 bytes inside of
248-byte region [fffffc0c54a36900, fffffc0c54a369f8)
[20563.918485] The buggy address belongs to the page:
[20563.923269] page:ffffffff82f528c0 refcount:1 mapcount:0 mapping:fffffc8e4ba31900 index:0xfffffc0c54a33300
[20563.932832] raw: 17ffff8000000200 ffffffffa3060100 0000000700000007 fffffc8e4ba31900
[20563.940567] raw: fffffc0c54a33300 0000000080aa0042 00000001ffffffff 0000000000000000
[20563.948300] page dumped because: kasan: bad access detected
[20563.955345] Memory state around the buggy address:
[20563.960129] fffffc0c54a36800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc
[20563.967342] fffffc0c54a36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[20563.974554] >fffffc0c54a36900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[20563.981766] ^
[20563.986288] fffffc0c54a36980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc
[20563.993501] fffffc0c54a36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[20564.000713] ==================================================================
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205703
Signed-off-by: Zorro Lang <zlang@redhat.com>
Fixes: 9cd0ed63ca ("iomap: enhance writeback error message")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
bio->bi_blkg will be NULL when the issue of the request
has bypassed the block layer as shown in the following oops:
Internal error: Oops: 96000005 [#1] SMP
CPU: 17 PID: 2996 Comm: scsi_id Not tainted 5.4.0 #4
Call trace:
percpu_counter_add_batch+0x38/0x4c8
bfqg_stats_update_legacy_io+0x9c/0x280
bfq_insert_requests+0xbac/0x2190
blk_mq_sched_insert_request+0x288/0x670
blk_execute_rq_nowait+0x140/0x178
blk_execute_rq+0x8c/0x140
sg_io+0x604/0x9c0
scsi_cmd_ioctl+0xe38/0x10a8
scsi_cmd_blk_ioctl+0xac/0xe8
sd_ioctl+0xe4/0x238
blkdev_ioctl+0x590/0x20e0
block_ioctl+0x60/0x98
do_vfs_ioctl+0xe0/0x1b58
ksys_ioctl+0x80/0xd8
__arm64_sys_ioctl+0x40/0x78
el0_svc_handler+0xc4/0x270
so ensure its validity before using it.
Fixes: fd41e60331 ("bfq-iosched: stop using blkg->stat_bytes and ->stat_ios")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Links are created by chaining requests through req->list with an
exception that head uses req->link_list. (e.g. link_list->list->list)
Because of that, io_req_link_next() needs complex splicing to advance.
Link them all through list_list. Also, it seems to be simpler and more
consistent IMHO.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of an error io_submit_sqe() drops a request and continues
without it, even if the request was a part of a link. Not only it
doesn't cancel links, but also may execute wrong sequence of actions.
Stop consuming sqes, and let the user handle errors.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a root user or a user with CAP_SYS_ADMIN privilege uses any
trace_imc performance monitoring unit events, to monitor application
or KVM threads, it may result in a checkstop (System crash).
The cause is frequent switching of the "trace/accumulation" mode of
the In-Memory Collection hardware (LDBAR).
This patch disables the trace_imc PMU unit entirely to avoid
triggering the checkstop. A future patch will reenable it at a later
stage once a workaround has been developed.
Fixes: 012ae24484 ("powerpc/perf: Trace imc PMU functions")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Hariharan T.S. <hari@linux.ibm.com>
[mpe: Add pr_info_once() so dmesg shows the PMU has been disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118034452.9939-1-maddy@linux.vnet.ibm.com
export_imc_mode_and_cmd() function which creates the debugfs interface
for imc-mode and imc-command, is invoked when each nest pmu units is
registered.
When the first nest pmu unit is registered, export_imc_mode_and_cmd()
creates 'imc' directory under `/debug/powerpc/`. In the subsequent
invocations debugfs_create_dir() function returns, since the directory
already exists.
The recent commit <c33d442328f55> (debugfs: make error message a bit
more verbose), throws a warning if we try to invoke
`debugfs_create_dir()` with an already existing directory name.
Address this warning by making the debugfs directory registration in
the opal_imc_counters_probe() function, i.e invoke
export_imc_mode_and_cmd() function from the probe function.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.com
The existing fexit_bpf2bpf test covers the target progrm with callees.
This patch added a test for the target program without callees.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205010607.177904-1-yhs@fb.com
For jited bpf program, if the subprogram count is 1, i.e.,
there is no callees in the program, prog->aux->func will be NULL
and prog->bpf_func points to image address of the program.
If there is more than one subprogram, prog->aux->func is populated,
and subprogram 0 can be accessed through either prog->bpf_func or
prog->aux->func[0]. Other subprograms should be accessed through
prog->aux->func[subprog_id].
This patch fixed a bug in check_attach_btf_id(), where
prog->aux->func[subprog_id] is used to access any subprogram which
caused a segfault like below:
[79162.619208] BUG: kernel NULL pointer dereference, address:
0000000000000000
......
[79162.634255] Call Trace:
[79162.634974] ? _cond_resched+0x15/0x30
[79162.635686] ? kmem_cache_alloc_trace+0x162/0x220
[79162.636398] ? selinux_bpf_prog_alloc+0x1f/0x60
[79162.637111] bpf_prog_load+0x3de/0x690
[79162.637809] __do_sys_bpf+0x105/0x1740
[79162.638488] do_syscall_64+0x5b/0x180
[79162.639147] entry_SYSCALL_64_after_hwframe+0x44/0xa9
......
Fixes: 5b92a28aae ("bpf: Support attaching tracing BPF program to other BPF programs")
Reported-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205010606.177774-1-yhs@fb.com
Yunsheng Lin