Disable regulator first after an error occurs when probe. Remove the
directly return code when probe error occurs.
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Fix build warning when CONFIG_PM_SLEEP=n, the warning message is:
drivers/input/misc/mpl3115.c:290:12: warning: ‘mpl3115_start_chip’ defined but not used [-Wunused-function]
static int mpl3115_start_chip(struct i2c_client *client)
^~~~~~~~~~~~~~~~~~
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
(cherry picked from commit fd826f4b26257fe04272e0d91b53a8e448812bf3)
The sensors share an interrupt pin on imx8qm/imx8qxp mek.
As a result, the interrupt signals will be interfered by
each other in default push-pull status.
This patch sets sensor interrupt pins as open-drain when
necessary.
Signed-off-by: Gao Pan <pandy.gao@nxp.com>
(cherry-picked from 48bcb7aafa2a3ced923d1a1753bb19d89a9fc273)
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
(cherry picked from commit 8406dfab0fdbd5d135a614c38492b2e949ce0ede)
In probe function, if probe fails, the enabled regulator will cause a
WARN_ON.
Add regulator_diable when error occurs in probe function.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
In probe function, if probe fails, the enabled regulator will cause a
WARN_ON.
Add regulator_diable when error occurs in probe function.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
In probe function, if probe fails, the enabled regulator will cause a
WARN_ON.
Add regulator_diable when error occurs in probe function.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
This is fixing the build when the driver is enabled as a module, when
CONFIG_MXC_MMA8451=m
Signed-off-by: Julien Olivain <julien.olivain@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Add mma8451 driver support for i.MX6Q/DL/SX platform. The code derives from 3.10.y branch.
Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Added explicit dependency on INPUT_POLLDEV during 4.14 rebase so that it
doesn't break the arm64 build
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
TODO: checkpatch warnings
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Use global variable instead of macro "MAG3110_IRQ_USED" that is more
flexible.
Signed-off-by: Fugang Duan <B38611@freescale.com>
TODO: checkpatch warnings
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
When CONFIG_SENSOR_FXLS8471=m build was failing due to missing
exported symbol. This patch export the missing symbol.
Signed-off-by: Julien Olivain <julien.olivain@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
The driver kfree the global memory that is not correct. The patch
remove them.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Support ±2g/±4g/±8g dynamically selection for motion sensor fxls8471.
Set the sensor mode to standby mode before changing the scale range
with the command "echo 0 > enable". The scale range can be changed
with the command "echo 0/1/2 > range".
Signed-off-by: Gao Pan <b54642@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
(cherry picked from commit: 6824cff93d368eafbf96c71fad541f9bc2502e3a)
TODO: checkpatch warnings
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Fix the Coverity warning "divide_by_zero".
If "rext" is incorrectly set as zero in dts file, "divide_by_zero" will
happen at line 960. So add a judgment condition here, and let "rext" uses
default value when it is equal to zero.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
(cherry picked from commit 999f94e0d7524640381eb4b3f6590f213533679e)
evbug will open the mma8450 on i.MX6SL_EVK and mma8450 will work in 2G mode
by default.
That is the reason why mma8450 logs will be printed out. The main changes
is below:
* Remove the open(), close() hook out of the drivers. The open() and
close() hook in input framework is defined as void type. It isn't
strictly safe in logic when some error happends. So remove them out.
* Modify the mma8450 to standby mode by default. It will be more power
saving and there would be no log printing out after booting up.
* Provide the sys interface to modify the mma8450 work modes. Then the
higher layer can modify the the mma8450 work mode via the interface. It
would be much safer.There would be a sclaemode interface in the folder
of
/sys/devices/soc0/soc.1/2100000.aips-bus/21a0000.i2c/i2c-0/0-001c/scalemode
User can use cat to read the current scalemode and echo to write. The
mode is defined as: MODE_STANDBY: 0 MODE_2G:1 MODE_4G:2 MODE_8G:3
* Add mutex to protect and some error handling.
Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
(cherry picked from commit c51a786078fd569ce95eb6dcf09c76d1b3c0f172)
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Add chip ID check in probe function. The mma8450 is
on the E-INK daughter board. When the daughter board
is not pluged, there would be polling error log
continuously. Add the check to avoid this.
Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
(cherry picked from commit e9f2c4cf673dee1527925f30a9f3fd137d9799ad)
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
NXP i.MX7ULP EVK boards all sensors connect with M4 core, A core
has to conmunicate with sensors by virtual io bus like rpmsg bus.
The driver implement the virtual sensor input driver to configure
sensors active/idle/delay actions and report the sensors' event to
user space.
Supply below sysfs for user to enable/disable detector and counter,
set poll delay:
/sys/class/misc/step_counter/enable
/sys/class/misc/step_detector/enable
/sys/class/misc/step_counter/poll_delay
Reviewed-by: Elven Wang <elven.wang@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
TODO: checkpatch warnings
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
The sensors share an interrupt pin on imx8qm/imx8qxp mek.
As a result, the interrupt signals will be interfered by
each other in default push-pull status.
This patch sets sensor interrupt pins as open-drain when
necessary.
Signed-off-by: Gao Pan <pandy.gao@nxp.com>
(cherry-picked from 48bcb7aafa2a3ced923d1a1753bb19d89a9fc273)
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
The sensors share an interrupt pin on imx8qm/imx8qxp mek.
As a result, the interrupt signals will be interfered by
each other in default push-pull status.
This patch sets sensor interrupt pins as open-drain when
necessary.
Signed-off-by: Gao Pan <pandy.gao@nxp.com>
(cherry-picked from 48bcb7aafa2a3ced923d1a1753bb19d89a9fc273)
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Support ±2g/±4g/±8g dynamically selection for motion sensor fxos8700.
Set the sensor mode to standby mode before changing the scale range
with the command "echo 0 > enable". The scale range can be changed
with the command "echo 0/1/2 > range".
Signed-off-by: Gao Pan <b54642@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
(cherry picked from commit: 74c9af0a5806fb5c926ffdab3145fc1680fc87e6)
TODO: checkpatch warnings
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Pull cramfs fix from Al Viro:
"Regression fix, fallen through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cramfs: fix usage on non-MTD device
When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.
Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.
Fixes: 74f78fc5ef ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Minor bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl3U6E4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpi/oIAJwjsmGhheWTRa+vL/otHu1PjOQ4hziYwu/A
n80gp3pmPMa4yV5CDZt72qL4jH8llXPpH4gErvXvSyKfrvmelkJBILB53mAa04pq
BZWhkbcqldhMo35y3Ac+WcRk9zlkGq0NPuUcCb959h+pRXuZWtKWxQ2miwi413e1
1ecBRO64SvXSphflFfMMCB730aIXC/dsZAtBXqs8v+i4cIz9g8Z4fZS6c38nUA23
wBleNWylaxHn6UDRZAGRY12JFxFe3QxCP0RKTjwo0eF3HG7IZIGQKHnztjlqD4ko
ZOQmxPYW2+96XnS8n7y+gA517u10OIVZBocD9FX10c3wvS+Lpxg=
=KAuZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull last minute virtio bugfixes from Michael Tsirkin:
"Minor bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix shrinker count
virtio_balloon: fix shrinker scan number of pages
virtio_console: allocate inbufs in add_port() only if it is needed
virtio_ring: fix return code on DMA mapping fails
Pull input fix from Dmitry Torokhov:
"Just a single revert as RMI mode should not have been enabled for this
model [yet?]"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"
This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.
Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.
Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull networking fixes from David Miller:
1) Validate tunnel options length in act_tunnel_key, from Xin Long.
2) Fix DMA sync bug in gve driver, from Adi Suresh.
3) TSO kills performance on some r8169 chips due to HW issues, disable
by default in that case, from Corinna Vinschen.
4) Fix clock disable mismatch in fec driver, from Chubong Yuan.
5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan.
6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann.
7) Don't napi_disable() twice in r8152 driver, from Hayes Wang.
8) Fix SKB extension memory leak, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
r8152: avoid to call napi_disable twice
MAINTAINERS: Add myself as maintainer of virtio-vsock
udp: drop skb extensions before marking skb stateless
net: rtnetlink: prevent underflows in do_setvfinfo()
can: m_can_platform: remove unnecessary m_can_class_resume() call
can: m_can_platform: set net_device structure as driver data
hv_netvsc: Fix send_table offset in case of a host bug
hv_netvsc: Fix offset usage in netvsc_send_table()
net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN
sfc: Only cancel the PPS workqueue if it exists
nfc: port100: handle command failure cleanly
net-sysfs: fix netdev_queue_add_kobject() breakage
r8152: Re-order napi_disable in rtl8152_close
net: qca_spi: Move reset_count to struct qcaspi
net: qca_spi: fix receive buffer size check
net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode
Revert "net/ibmvnic: Fix EOI when running in XIVE mode"
net/mlxfw: Verify FSM error code translation doesn't exceed array size
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Fix auto group size calculation
...
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.
Commit b9b1f8d593 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:
$ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
dd: error writing 'foo': File too large
Set s_maxbytes to MAX_LFS_FILESIZE.
Fixes: b9b1f8d593 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Servers sending callback breaks to the YFS_CM_SERVICE service may
send up to YFSCBMAX (1024) fids in a single RPC. Anything over
AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger.
Remove the assert, as the count has already been checked against
the appropriate max values in afs_deliver_cb_callback and
afs_deliver_yfs_cb_callback.
Fixes: 35dbfba311 ("afs: Implement the YFS cache manager service")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call napi_disable() twice would cause dead lock. There are three situations
may result in the issue.
1. rtl8152_pre_reset() and set_carrier() are run at the same time.
2. Call rtl8152_set_tunable() after rtl8152_close().
3. Call rtl8152_set_ringparam() after rtl8152_close().
For #1, use the same solution as commit 8481141246 ("r8152: Re-order
napi_disable in rtl8152_close"). For #2 and #3, add checking the flag
of IFF_UP and using napi_disable/napi_enable during mutex.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc fixes from Andrew Morton:
"Three fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()
mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()
Revert "fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()"
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEmvEkXzgOfc881GuFWsYho5HknSAFAl3X9E0THG1rbEBwZW5n
dXRyb25peC5kZQAKCRBaxiGjkeSdIIeQB/9EctdOAnM39+4vy22n9veOj/qEWW1S
VbIgG2WG3eHRPhCVoA7d61QS3/Mdeme0HU6icUXG3AYomCEEDu/Rc0kaFL8G3Zj5
mfL7ypIrjwjC2aEvaRzWVk4+0RW2xAchWONLycaC3ubolmr2q04ETDoY/dmWgByG
UpkhcCuy95kxD5e10do0g8UsP8xJwTEgRD91uPk2/M/f90LTJ1EVCh4nsntoYUDj
PmhavZNoiRBQTjajaHzE6jBQp6kJFvImcbMpn1mFQOuqSnk/b0hWSkgtP40Mp6xD
1j9M2JuttE5ai0eWh8xk0m3/mbCuCeTvJyW4F+c2OQ/aPzl1FqNkrTqh
=9oQw
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.4-20191122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-11-22
this is a pull request of 2 patches for net/master, if possible for the
current release cycle. Otherwise these patches should hit v5.4 via the
stable tree.
Both patches of this pull request target the m_can driver. Pankaj Sharma
fixes the fallout in the m_can_platform part, which appeared with the
introduction of the m_can platform framework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since I'm actively working on vsock and virtio/vhost transports,
Stefan suggested to help him to maintain it.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once udp stack has set the UDP_SKB_IS_STATELESS flag, later skb free
assumes all skb head state has been dropped already.
This will leak the extension memory in case the skb has extensions other
than the ipsec secpath, e.g. bridge nf data.
To fix this, set the UDP_SKB_IS_STATELESS flag only if we don't have
extensions or if the extension space can be free'd.
Fixes: 895b5c9f20 ("netfilter: drop bridge nf reset from nf_reset")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Byron Stanoszek <gandalf@winds.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix problems with switching cpufreq drivers on some x86 systems with
ACPI (and with changing the operation modes of the intel_pstate driver
on those systems) introduced by recent changes related to the
management of frequency limits in cpufreq.
-----BEGIN PGP SIGNATURE-----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=S23p
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management regression fix from Rafael Wysocki:
"Fix problems with switching cpufreq drivers on some x86 systems with
ACPI (and with changing the operation modes of the intel_pstate driver
on those systems) introduced by recent changes related to the
management of frequency limits in cpufreq"
* tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: QoS: Invalidate frequency QoS requests after removal
amdgpu:
- Remove experimental flag for navi14
- Fix confusing power message failures on older VI parts
- Hang fix for gfxoff when using the read register interface
- Two stability regression fixes for Raven
i915:
- Fix kernel oops on dumb_create ioctl on no crtc situation
- Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
- Fix unity of the frequencies reported on PMU
- Fix kernel oops on set_page_dirty using better locks around it
- Protect the request pointer with RCU to prevent it being freed while we might need still
- Make pool objects read-only
- Restore physical addresses for fb_map to avoid corrupted page table
-----BEGIN PGP SIGNATURE-----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=0Z0x
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Two sets of fixes in here, one for amdgpu, and one for i915.
The amdgpu ones are pretty small, i915's CI system seems to have a few
problems in the last week or so, there is one major regression fix for
fb_mmap, but there are a bunch of other issues fixed in there as well,
oops, screen flashes and rcu related.
amdgpu:
- Remove experimental flag for navi14
- Fix confusing power message failures on older VI parts
- Hang fix for gfxoff when using the read register interface
- Two stability regression fixes for Raven
i915:
- Fix kernel oops on dumb_create ioctl on no crtc situation
- Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
- Fix unity of the frequencies reported on PMU
- Fix kernel oops on set_page_dirty using better locks around it
- Protect the request pointer with RCU to prevent it being freed
while we might need still
- Make pool objects read-only
- Restore physical addresses for fb_map to avoid corrupted page
table"
* tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm:
drm/i915/fbdev: Restore physical addresses for fb_mmap()
Revert "drm/amd/display: enable S/G for RAVEN chip"
drm/amdgpu: disable gfxoff on original raven
drm/amdgpu: disable gfxoff when using register read interface
drm/amd/powerplay: correct fine grained dpm force level setting
drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs
drm/amdgpu: remove experimental flag for Navi14
drm/i915: make pool objects read-only
drm/i915: Protect request peeking with RCU
drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
drm/i915/pmu: "Frequency" is reported as accumulated cycles
drm/i915: Preload LUTs if the hw isn't currently using them
drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().
WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150
Call Trace:
remove_all_stable_nodes+0x12b/0x330
run_store+0x4ef/0x7b0
kernfs_fop_write+0x200/0x420
vfs_write+0x154/0x450
ksys_write+0xf9/0x1d0
do_syscall_64+0x99/0x510
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Remove the warning as there is nothing scary going on.
Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com
Fixes: cbf86cfe04 ("ksm: remove old stable nodes more thoroughly")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's limit shrinking to !ZONE_DEVICE so we can fix the current code.
We should never try to touch the memmap of offline sections where we
could have uninitialized memmaps and could trigger BUGs when calling
page_to_nid() on poisoned pages.
There is no reliable way to distinguish an uninitialized memmap from an
initialized memmap that belongs to ZONE_DEVICE, as we don't have
anything like SECTION_IS_ONLINE we can use similar to
pfn_to_online_section() for !ZONE_DEVICE memory.
E.g., set_zone_contiguous() similarly relies on pfn_to_online_section()
and will therefore never set a ZONE_DEVICE zone consecutive. Stopping
to shrink the ZONE_DEVICE therefore results in no observable changes,
besides /proc/zoneinfo indicating different boundaries - something we
can totally live with.
Before commit d0dc12e86b ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized with 0 and the node with the right
value. So the zone might be wrong but not garbage. After that commit,
both the zone and the node will be garbage when touching uninitialized
memmaps.
Toshiki reported a BUG (race between delayed initialization of
ZONE_DEVICE memmaps without holding the memory hotplug lock and
concurrent zone shrinking).
https://lkml.org/lkml/2019/11/14/1040
"Iteration of create and destroy namespace causes the panic as below:
kernel BUG at mm/page_alloc.c:535!
CPU: 7 PID: 2766 Comm: ndctl Not tainted 5.4.0-rc4 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:set_pfnblock_flags_mask+0x95/0xf0
Call Trace:
memmap_init_zone_device+0x165/0x17c
memremap_pages+0x4c1/0x540
devm_memremap_pages+0x1d/0x60
pmem_attach_disk+0x16b/0x600 [nd_pmem]
nvdimm_bus_probe+0x69/0x1c0
really_probe+0x1c2/0x3e0
driver_probe_device+0xb4/0x100
device_driver_attach+0x4f/0x60
bind_store+0xc9/0x110
kernfs_fop_write+0x116/0x190
vfs_write+0xa5/0x1a0
ksys_write+0x59/0xd0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
While creating a namespace and initializing memmap, if you destroy the
namespace and shrink the zone, it will initialize the memmap outside
the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page),
pfn), page) in set_pfnblock_flags_mask()."
This BUG is also mitigated by this commit, where we for now stop to
shrink the ZONE_DEVICE zone until we can do it in a safe and clean way.
Link: http://lkml.kernel.org/r/20191006085646.5768-5-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 56e94ea132.
Commit 56e94ea132 ("fs: ocfs2: fix possible null-pointer dereferences
in ocfs2_xa_prepare_entry()") introduces a regression that fail to
create directory with mount option user_xattr and acl. Actually the
reported NULL pointer dereference case can be correctly handled by
loc->xl_ops->xlo_add_entry(), so revert it.
Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com
Fixes: 56e94ea132 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Acked-by: Changwei Ge <gechangwei@live.cn>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function m_can_runtime_resume() is getting recursively called from
m_can_class_resume(). This results in a lock up.
We need not call m_can_class_resume() during m_can_runtime_resume().
Fixes: f524f829b7 ("can: m_can: Create a m_can platform framework")
Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com>
Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>