I was investigating an issue with seabios >= 1.10 which stopped working
for nested KVM on Hyper-V. The problem appears to be in
handle_ept_violation() function: when we do fast mmio we need to skip
the instruction so we do kvm_skip_emulated_instruction(). This, however,
depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS.
However, this is not the case.
Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when
EPT MISCONFIG occurs. While on real hardware it was observed to be set,
some hypervisors follow the spec and don't set it; we end up advancing
IP with some random value.
I checked with Microsoft and they confirmed they don't fill
VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG.
Fix the issue by doing instruction skip through emulator when running
nested.
Fixes: 68c3b4d167
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
All d-entries for vcpu have the same, "anon_inode:kvm-vcpu". That means
it is impossible to know the mapping between fds for vcpu and vcpu
from userland.
# LC_ALL=C ls -l /proc/617/fd | grep vcpu
lrwx------. 1 qemu qemu 64 Jan 7 16:50 18 -> anon_inode:kvm-vcpu
lrwx------. 1 qemu qemu 64 Jan 7 16:50 19 -> anon_inode:kvm-vcpu
It is also impossible to know the mapping between vma for kvm_run
structure and vcpu from userland.
# LC_ALL=C grep vcpu /proc/617/maps
7f9d842d0000-7f9d842d3000 rw-s 00000000 00:0d 20393 anon_inode:kvm-vcpu
7f9d842d3000-7f9d842d6000 rw-s 00000000 00:0d 20393 anon_inode:kvm-vcpu
This change adds vcpu id to d-entries for vcpu. With this change
you can get the following output:
# LC_ALL=C ls -l /proc/617/fd | grep vcpu
lrwx------. 1 qemu qemu 64 Jan 7 16:50 18 -> anon_inode:kvm-vcpu:0
lrwx------. 1 qemu qemu 64 Jan 7 16:50 19 -> anon_inode:kvm-vcpu:1
# LC_ALL=C grep vcpu /proc/617/maps
7f9d842d0000-7f9d842d3000 rw-s 00000000 00:0d 20393 anon_inode:kvm-vcpu:0
7f9d842d3000-7f9d842d6000 rw-s 00000000 00:0d 20393 anon_inode:kvm-vcpu:1
With the mappings known from the output, a tool like strace can report more details
of qemu-kvm process activities. Here is the strace output of my local prototype:
# ./strace -KK -f -p 617 2>&1 | grep 'KVM_RUN\| K'
...
[pid 664] ioctl(18, KVM_RUN, 0) = 0 (KVM_EXIT_MMIO)
K ready_for_interrupt_injection=1, if_flag=0, flags=0, cr8=0000000000000000, apic_base=0x000000fee00d00
K phys_addr=0, len=1634035803, [33, 0, 0, 0, 0, 0, 0, 0], is_write=112
[pid 664] ioctl(18, KVM_RUN, 0) = 0 (KVM_EXIT_MMIO)
K ready_for_interrupt_injection=1, if_flag=1, flags=0, cr8=0000000000000000, apic_base=0x000000fee00d00
K phys_addr=0, len=1634035803, [33, 0, 0, 0, 0, 0, 0, 0], is_write=112
...
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
For EPT-violations that are triggered by a read, the pages are also mapped with
write permissions (if their memory region is also writable). That would avoid
getting yet another fault on the same page when a write occurs.
This optimization only happens when you have a "struct page" backing the memory
region. So also enable it for memory regions that do not have a "struct page".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The changes for this version include icache invalidation optimizations
(improving VM startup time), support for forwarded level-triggered
interrupts (improved performance for timers and passthrough platform
devices), a small fix for power-management notifiers, and some cosmetic
changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJacYnLAAoJEEtpOizt6ddyhHUH/1f/AHC4t6sNJJ4LAbWAjuve
77scB7vsVVpZqHUeA1i8d0vrWJQeqg8CEQ+iP/OVLC+bWVX0yeBtrt/pMJA8sXrV
Jbo5kQu3NyrRUAew83rcvoqsVVf67BB/NohL7C7sQDvNp2bg2cgzxhpgNJUuUXQC
WcEOhqstWo6NYJ7xYz5f+utzYQRO0YfnIzoTsoaNgDHSw/V37Ny9O0tYqTQGNYUm
zZ+cRo3nFRFywbmHhIHvXkxmS0lGdACQWTzyd+qDsgiPJ463vRT6Fc035SSuqX9x
MmS87cBdt1IK9yi0Firqhuy6CGgHZmnagHizE0arMv72Pcv/ucrkCDRqLQDhSMY=
=bZLm
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Changes for v4.16
The changes for this version include icache invalidation optimizations
(improving VM startup time), support for forwarded level-triggered
interrupts (improved performance for timers and passthrough platform
devices), a small fix for power-management notifiers, and some cosmetic
changes.
When I introduced a static key to avoid work in the critical path for
userspace irqchips which is very rarely used, I accidentally messed up
my logic and used && where I should have used ||, because the point was
to short-circuit the evaluation in case userspace irqchips weren't even
in use.
This fixes an issue when running in-kernel irqchip VMs alongside
userspace irqchip VMs.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Fixes: c44c232ee2d3 ("KVM: arm/arm64: Avoid work when userspace iqchips are not used")
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We were not decrementing the static key count in the right location.
kvm_arch_vcpu_destroy() is only called to clean up after a failed
VCPU create attempt, whereas kvm_arch_vcpu_free() is called on teardown
of the VM as well. Move the static key decrement call to
kvm_arch_vcpu_free().
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
After the recently introduced support for level-triggered mapped
interrupt, I accidentally left the VCPU thread busily going back and
forward between the guest and the hypervisor whenever the guest was
blocking, because I would always incorrectly report that a timer
interrupt was pending.
This is because the timer->irq.level field is not valid for mapped
interrupts, where we offload the level state to the hardware, and as a
result this field is always true.
Luckily the problem can be relatively easily solved by not checking the
cached signal state of either timer in kvm_timer_should_fire() but
instead compute the timer state on the fly, which we do already if the
cached signal state wasn't high. In fact, the only reason for checking
the cached signal state was a tiny optimization which would only be
potentially faster when the polling loop detects a pending timer
interrupt, which is quite unlikely.
Instead of duplicating the logic from kvm_arch_timer_handler(), we
enlighten kvm_timer_should_fire() to report something valid when the
timer state is loaded onto the hardware. We can then call this from
kvm_arch_timer_handler() as well and avoid the call to
__timer_snapshot_state() in kvm_arch_timer_get_input_level().
Reported-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
As I have neither too much time nor access to the architecture
documentation anymore, let's switch my status from maintainer to
reviewer. Janosch will step in as second maintainer.
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The patch modifies the previously defined GISA data structure to be
able to store two GISA formats, format-0 and format-1. Additionally,
it verifies the availability of the GISA format facility and enables
the use of a format-1 GISA in the SIE control block accordingly.
A format-1 can do everything that format-0 can and we will need it
for real HW passthrough. As there are systems with only format-0
we keep both variants.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The GISA format facility is required by the host to be able to process
a format-1 GISA. If not available, the used GISA format will be format-0.
All format-1 related extension will not be available in this case.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the AIV facility is available, a GISA will be used to manage emulated
adapter interrupts.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function returns a pending I/O interrupt with the highest
priority defined by its ISC.
Together with AIV activation, pending adapter interrupts are
managed by the GISA IPM. Thus kvm_s390_get_io_int() needs to
inspect the IPM as well when the interrupt with the highest
priority has to be identified.
In case classic and adapter interrupts with the same ISC are
pending, the classic interrupt will be returned first.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pending interrupts marked in the GISA IPM are required to
become part of the answer of ioctl KVM_DEV_FLIC_GET_ALL_IRQS.
The ioctl KVM_DEV_FLIC_ENQUEUE is already capable to enqueue
adapter interrupts when a GISA is present.
With ioctl KVM_DEV_FLIC_CLEAR_IRQS the GISA IPM wil be cleared
now as well.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function isc_to_int_word() allows the generation of interruption
words for adapter interrupts.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.
This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.
To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.
Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.
Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).
The code will be activated with a follow-up patch.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The patch adds an indication for the presence Adapter Interruption
Virtualization facility (AIV) of the general channel subsystem
characteristics.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[change wording]
The patch implements routines to access the GISA to test and modify
its Interruption Pending Mask (IPM) from the host side.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds a MSB0 bit numbering version of test_and_clear_bit().
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In preperation to support pass-through adapter interrupts, the Guest
Interruption State Area (GISA) and the Adapter Interruption Virtualization
(AIV) features will be introduced here.
This patch introduces format-0 GISA (that is defines the struct describing
the GISA, allocates storage for it, and introduces fields for the
GISA address in kvm_s390_sie_block and kvm_s390_vsie).
As the GISA requires storage below 2GB, it is put in sie_page2, which is
already allocated in ZONE_DMA. In addition, The GISA requires alignment to
its integral boundary. This is already naturally aligned via the
padding in the sie_page2.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch prepares a simplification of bit operations between the irq
pending mask for emulated interrupts and the Interruption Pending Mask
(IPM) which is part of the Guest Interruption State Area (GISA), a feature
that allows interrupt delivery to guests by means of the SIE instruction.
Without that change, a bit-wise *or* operation on parts of these two masks
would either require a look-up table of size 256 bytes to map the IPM
to the emulated irq pending mask bit orientation (all bits mirrored at half
byte) or a sequence of up to 8 condidional branches to perform tests of
single bit positions. Both options are to be rejected either by performance
or space utilization reasons.
Beyond that this change will be transparent.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it just like kvm_s390_set_cpuflags().
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it in all places where we set cpuflags.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
No need to make this function special. Move it to a header right away.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The overall instruction counter is larger than the sum of the
single counters. We should try to catch all instruction handlers
to make this match the summary counter.
Let us add sck,tb,sske,iske,rrbe,tb,tpi,tsch,lpsw,pswe....
and remove other unused ones.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Make the diagnose counters also appear as instruction counters.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
We never call it with anything but PROT_READ. This is a left over from
an old prototype. For creation of shadow page tables, we always only
have to protect the original table in guest memory from write accesses,
so we can properly invalidate the shadow on writes. Other protections
are not needed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123212618.32611-1-david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This way, the values cannot change, even if another VCPU might try to
mess with the nested SCB currently getting executed by another VCPU.
We now always use the same gpa for pinning and unpinning a page (for
unpinning, it is only relevant to mark the guest page dirty for
migration).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Another VCPU might try to modify the SCB while we are creating the
shadow SCB. In general this is no problem - unless the compiler decides
to not load values once, but e.g. twice.
For us, this is only relevant when checking/working with such values.
E.g. the prefix value, the mso, state of transactional execution and
addresses of satellite blocks.
E.g. if we blindly forward values (e.g. general purpose registers or
execution controls after masking), we don't care.
Leaving unpin_blocks() untouched for now, will handle it separately.
The worst thing right now that I can see would be a missed prefix
un/remap (mso, prefix, tx) or using wrong guest addresses. Nothing
critical, but let's try to avoid unpredictable behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
cpu_pm_enter() calls the pm notifier chain with CPU_PM_ENTER, then if
there is a failure: CPU_PM_ENTER_FAILED.
When KVM receives CPU_PM_ENTER it calls cpu_hyp_reset() which will
return us to the hyp-stub. If we subsequently get a CPU_PM_ENTER_FAILED,
KVM does nothing, leaving the CPU running with the hyp-stub, at odds
with kvm_arm_hardware_enabled.
Add CPU_PM_ENTER_FAILED as a fallthrough for CPU_PM_EXIT, this reloads
KVM based on kvm_arm_hardware_enabled. This is safe even if CPU_PM_ENTER
never gets as far as KVM, as cpu_hyp_reinit() calls cpu_hyp_reset()
to make sure the hyp-stub is loaded before reloading KVM.
Fixes: 67f6919766 ("arm64: kvm: allows kvm cpu hotplug")
Cc: <stable@vger.kernel.org> # v4.7+
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
It seems it hasn't even been used before the last cleanup and was
overlooked.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1513169613-13509-12-git-send-email-frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add an extra temporary register parameter to uaccess_ttbr0_disable which
is about to be required for arm64 PAN support.
This patch doesn't introduce any functional change but ensures that the
kernel compiles once the KVM/ARM tree is merged with the arm64 tree by
ensuring a trivially mergable conflict with commit
6b88a32c7a
("arm64: kpti: Fix the interaction between ASID switching and software PAN").
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Remove duplicate expression in nested_vmx_prepare_msr_bitmap, and make
the register names clearer in hardware_setup.
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Resolved rebase conflict after removing Intel PT. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The bulk of the MSR bitmap is either immutable, or can be copied from
the L1 bitmap. By initializing it at VMXON time, and copying the mutable
parts one long at a time on vmentry (rather than one bit), about 4000
clock cycles (30%) can be saved on a nested VMLAUNCH/VMRESUME.
The resulting for loop only has four iterations, so it is cheap enough
to reinitialize the MSR write bitmaps on every iteration, and it makes
the code simpler.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The APICv-enabled MSR bitmap is a superset of the APICv-disabled bitmap.
Make that obvious in vmx_disable_intercept_msr_x2apic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Resolved rebase conflict after removing Intel PT. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The POSTED_INTR_NV field is constant (though it differs between the vmcs01 and
vmcs02), there is no need to reload it on vmexit to L1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
These fields are also simple copies of the data in the vmcs12 struct.
For some of them, prepare_vmcs02 was skipping the copy when the field
was unused. In prepare_vmcs02_full, we copy them always as long as the
field exists on the host, because the corresponding execution control
might be one of the shadowed fields.
Optimization opportunities remain for MSRs that, depending on the
entry/exit controls, have to be copied from either the vmcs01 or
the vmcs12: EFER (whose value is partly stored in the entry controls
too), PAT, DEBUGCTL (and also DR7). Before moving these three and
the entry/exit controls to prepare_vmcs02_full, KVM would have to set
dirty_vmcs12 on writes to the L1 MSRs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This part is separate for ease of review, because git prefers to move
prepare_vmcs02 below the initial long sequence of vmcs_write* operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
VMCS12 fields that are not handled through shadow VMCS are rarely
written, and thus they are also almost constant in the vmcs02. We can
thus optimize prepare_vmcs02 by skipping all the work for non-shadowed
fields in the common case.
This patch introduces the (pretty simple) tracking infrastructure; the
next patches will move work to prepare_vmcs02_full and save a few hundred
clock cycles per VMRESUME on a Haswell Xeon E5 system:
before after
cpuid 14159 13869
vmcall 15290 14951
inl_from_kernel 17703 17447
outl_to_kernel 16011 14692
self_ipi_sti_nop 16763 15825
self_ipi_tpr_sti_nop 17341 15935
wr_tsc_adjust_msr 14510 14264
rd_tsc_adjust_msr 15018 14311
mmio-wildcard-eventfd:pci-mem 16381 14947
mmio-datamatch-eventfd:pci-mem 18620 17858
portio-wildcard-eventfd:pci-io 15121 14769
portio-datamatch-eventfd:pci-io 15761 14831
(average savings 748, stdev 460).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The vmcs_field_to_offset_table was a rather sparse table of short
integers with a maximum index of 0x6c16, amounting to 55342 bytes. Now
that we are considering support for multiple VMCS12 formats, it would
be unfortunate to replicate that large, sparse table. Rotating the
field encoding (as a 16-bit integer) left by 6 reduces that table to
5926 bytes.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Per the SDM, "[VMCS] Fields are grouped by width (16-bit, 32-bit,
etc.) and type (guest-state, host-state, etc.)." Previously, the width
was indicated by vmcs_field_type. To avoid confusion when we start
dealing with both field width and field type, change vmcs_field_type
to vmcs_field_width.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This is the highest index value used in any supported VMCS12 field
encoding. It is used to populate the IA32_VMX_VMCS_ENUM MSR.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Because all fields can be read/written with a single vmread/vmwrite on
64-bit kernels, the switch statements in copy_vmcs12_to_shadow and
copy_shadow_to_vmcs12 are unnecessary.
What I did in this patch is to copy the two parts of 64-bit fields
separately on 32-bit kernels, to keep all complicated #ifdef-ery
in init_vmcs_shadow_fields. The disadvantage is that 64-bit fields
have to be listed separately in shadow_read_only/read_write_fields,
but those are few and we can validate the arrays when building the
VMREAD and VMWRITE bitmaps. This saves a few hundred clock cycles
per nested vmexit.
However there is still a "switch" in vmcs_read_any and vmcs_write_any.
So, while at it, this patch reorders the fields by type, hoping that
the branch predictor appreciates it.
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Compared to when VMCS shadowing was added to KVM, we are reading/writing
a few more fields: the PML index, the interrupt status and the preemption
timer value. The first two are because we are exposing more features
to nested guests, the preemption timer is simply because we have grown
a new optimization. Adding them to the shadow VMCS field lists reduces
the cost of a vmexit by about 1000 clock cycles for each field that exists
on bare metal.
On the other hand, the guest BNDCFGS and TSC offset are not written on
fast paths, so remove them.
Suggested-by: Jim Mattson <jmattson@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Vitaly Kuznetsov