Pull crypto fix from Herbert Xu:
"This fixes a bug in the RSA self-test that may cause crashes on some
architectures such as SPARC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - Use kmalloc memory for RSA input
Merge fixes from Andrew Morton:
"4 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: thp: calculate the mapcount correctly for THP pages during WP faults
ksm: fix conflict between mmput and scan_get_next_rmap_item
ocfs2: fix posix_acl_create deadlock
ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang
This will provide fully accuracy to the mapcount calculation in the
write protect faults, so page pinning will not get broken by false
positive copy-on-writes.
total_mapcount() isn't the right calculation needed in
reuse_swap_page(), so this introduces a page_trans_huge_mapcount()
that is effectively the full accurate return value for page_mapcount()
if dealing with Transparent Hugepages, however we only use the
page_trans_huge_mapcount() during COW faults where it strictly needed,
due to its higher runtime cost.
This also provide at practical zero cost the total_mapcount
information which is needed to know if we can still relocate the page
anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we
can reuse the page no matter if it's a pte or a pmd_trans_huge
triggering the fault, but we can only relocate the page anon_vma to
the local vma->anon_vma if we're sure it's only this "vma" mapping the
whole THP physical range.
Kirill A. Shutemov discovered the problem with moving the page
anon_vma to the local vma->anon_vma in a previous version of this
patch and another problem in the way page_move_anon_rmap() was called.
Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a
previous version, because reuse_swap_page must be a macro to call
page_trans_huge_mapcount from swap.h, so this uses a macro again
instead of an inline function. With this change at least it's a less
dangerous usage than it was before, because "page" is used only once
now, while with the previous code reuse_swap_page(page++) would have
called page_mapcount on page+1 and it would have increased page twice
instead of just once.
Dean Luick noticed an uninitialized variable that could result in a
rmap inefficiency for the non-THP case in a previous version.
Mike Marciniszyn said:
: Our RDMA tests are seeing an issue with memory locking that bisects to
: commit 61f5d698cc ("mm: re-enable THP")
:
: The test program registers two rather large MRs (512M) and RDMA
: writes data to a passive peer using the first and RDMA reads it back
: into the second MR and compares that data. The sizes are chosen randomly
: between 0 and 1024 bytes.
:
: The test will get through a few (<= 4 iterations) and then gets a
: compare error.
:
: Tracing indicates the kernel logical addresses associated with the individual
: pages at registration ARE correct , the data in the "RDMA read response only"
: packets ARE correct.
:
: The "corruption" occurs when the packet crosse two pages that are not physically
: contiguous. The second page reads back as zero in the program.
:
: It looks like the user VA at the point of the compare error no longer points to
: the same physical address as was registered.
:
: This patch totally resolves the issue!
Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Josh Collier <josh.d.collier@intel.com>
Cc: Marc Haber <mh+linux-kernel@zugschlus.de>
Cc: <stable@vger.kernel.org> [4.5]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A concurrency issue about KSM in the function scan_get_next_rmap_item.
task A (ksmd): |task B (the mm's task):
|
mm = slot->mm; |
down_read(&mm->mmap_sem); |
|
... |
|
spin_lock(&ksm_mmlist_lock); |
|
ksm_scan.mm_slot go to the next slot; |
|
spin_unlock(&ksm_mmlist_lock); |
|mmput() ->
| ksm_exit():
|
|spin_lock(&ksm_mmlist_lock);
|if (mm_slot && ksm_scan.mm_slot != mm_slot) {
| if (!mm_slot->rmap_list) {
| easy_to_free = 1;
| ...
|
|if (easy_to_free) {
| mmdrop(mm);
| ...
|
|So this mm_struct may be freed in the mmput().
|
up_read(&mm->mmap_sem); |
As we can see above, the ksmd thread may access a mm_struct that already
been freed to the kmem_cache. Suppose a fork will get this mm_struct from
the kmem_cache, the ksmd thread then call up_read(&mm->mmap_sem), will
cause mmap_sem.count to become -1.
As suggested by Andrea Arcangeli, unmerge_and_remove_all_rmap_items has
the same SMP race condition, so fix it too. My prev fix in function
scan_get_next_rmap_item will introduce a different SMP race condition, so
just invert the up_read/spin_unlock order as Andrea Arcangeli said.
Link: http://lkml.kernel.org/r/1462708815-31301-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Geliang Tang <geliangtang@163.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 702e5bc68a ("ocfs2: use generic posix ACL infrastructure")
refactored code to use posix_acl_create. The problem with this function
is that it is not mindful of the cluster wide inode lock making it
unsuitable for use with ocfs2 inode creation with ACLs. For example,
when used in ocfs2_mknod, this function can cause deadlock as follows.
The parent dir inode lock is taken when calling posix_acl_create ->
get_acl -> ocfs2_iop_get_acl which takes the inode lock again. This can
cause deadlock if there is a blocked remote lock request waiting for the
lock to be downconverted. And same deadlock happened in ocfs2_reflink.
This fix is to revert back using ocfs2_init_acl.
Fixes: 702e5bc68a ("ocfs2: use generic posix ACL infrastructure")
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 743b5f1434 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
introduced this issue. ocfs2_setattr called by chmod command holds
cluster wide inode lock when calling posix_acl_chmod. This latter
function in turn calls ocfs2_iop_get_acl and ocfs2_iop_set_acl. These
two are also called directly from vfs layer for getfacl/setfacl commands
and therefore acquire the cluster wide inode lock. If a remote
conversion request comes after the first inode lock in ocfs2_setattr,
OCFS2_LOCK_BLOCKED will be set. And this will cause the second call to
inode lock from the ocfs2_iop_get_acl() to block indefinetly.
The deleted version of ocfs2_acl_chmod() calls __posix_acl_chmod() which
does not call back into the filesystem. Therefore, we restore
ocfs2_acl_chmod(), modify it slightly for locking as needed, and use that
instead.
Fixes: 743b5f1434 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a pretty boring pull request as you wish: including a few
small and trivial HD-audio and USB-audio quirks and a couple of small
regression fixes in HD-audio.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lhNO
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a pretty boring pull request as you wish: including a few
small and trivial HD-audio and USB-audio quirks and a couple of small
regression fixes in HD-audio"
* tag 'sound-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Yet another Phoneix Audio device quirk
ALSA: hda - Fix regression on ATI HDMI audio
ALSA: hda - Fix subwoofer pin on ASUS N751 and N551
ALSA: hda - Fix broken reconfig
ALSA: hda - Fix white noise on Asus UX501VW headset
ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)
- The pull up/down logic for the AT91 PIO4 controller was tilted:
we need to mask the reverse pull when unmasking a pull direction.
Setting both pull up & pull down is illegal and makes no sense.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Kzzn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fix from Linus Walleij:
"A single last pin control fix for v4.6. t's tagged for stable and
only hits a single driver with two added lines so should be safe.
Tested in linux-next.
- The pull up/down logic for the AT91 PIO4 controller was tilted: we
need to mask the reverse pull when unmasking a pull direction.
Setting both pull up & pull down is illegal and makes no sense"
* tag 'pinctrl-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: at91-pio4: fix pull-up/down logic
This fixes CVE-2016-0758.
In the ASN.1 decoder, when the length field of an ASN.1 value is extracted,
it isn't validated against the remaining amount of data before being added
to the cursor. With a sufficiently large size indicated, the check:
datalen - dp < 2
may then fail due to integer overflow.
Fix this by checking the length indicated against the amount of remaining
data in both places a definite length is determined.
Whilst we're at it, make the following changes:
(1) Check the maximum size of extended length does not exceed the capacity
of the variable it's being stored in (len) rather than the type that
variable is assumed to be (size_t).
(2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the
integer 0.
(3) To reduce confusion, move the initialisation of len outside of:
for (len = 0; n > 0; n--) {
since it doesn't have anything to do with the loop counter n.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Peter Jones <pjones@redhat.com>
This is a couple of small fixes: one is a potential uninitialised
error variable in the alua code, potentially causing spurious failures
and the other is a problem caused by the conversion of SCSI to
hostwide tags which resulted in the qla1280 driver always failing in
host initialisation.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJXM48uAAoJEDeqqVYsXL0MoXQH/2G/twARSNucNf0F/YW5dJL7
kY7yPk+HL7iz+Y/B6N6x/fGYKvlzg/Slum+rsCoDMYnkJCA+vwvWOeKvBDaEN3QJ
NrdJsOhhVkL1Vod6l7YnXxHq1spC+z1B6v6ixe/UsjevvZpi4Px8HtaZPhW5gM5Z
ha4vL5MS3FCpXs1p5haYT9VO3c0sxLSz7L/MiXA/zcBgsgegJGDUav1tgLzj8Sv+
36SdacJdooFPYLrPt1992B/lP56piuAXhkqi/X3y3oyO3rBhpJ6evSUEGN3/+wlm
hhZMoB5jiOTAZHIXNICI6qrJh1MLIBE4A+C8Hs/yzojhQvd1cd2S5X1OfoqVDr4=
=szZw
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a couple of small fixes: one is a potential uninitialised
error variable in the alua code, potentially causing spurious failures
and the other is a problem caused by the conversion of SCSI to
hostwide tags which resulted in the qla1280 driver always failing in
host initialisation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
qla1280: Don't allocate 512kb of host tags
scsi_dh_alua: uninitialized variable in alua_rtpg()
Pull networking fixes from David Miller:
"Hopefully the last round of fixes this release, fingers crossed :)
1) Initialize static nf_conntrack_locks_all_lock properly, from
Florian Westphal.
2) Need to cancel pending work when destroying IDLETIMER entries,
from Liping Zhang.
3) Fix TX param usage when sending TSO over iwlwifi devices, from
Emmanuel Grumbach.
4) NFACCT quota params not validated properly, from Phil Turnbull.
5) Resolve more glibc vs. kernel header conflicts, from Mikko
Tapeli.
6) Missing IRQ free in ravb_close(), from Geert Uytterhoeven.
7) Fix infoleak in x25, from Kangjie Lu.
8) Similarly in thunderx driver, from Heinrich Schuchardt.
9) tc_ife.h uapi header not exported properly, from Jamal Hadi Salim.
10) Don't reenable PHY interreupts if device is in polling mode, from
Shaohui Xie.
11) Packet scheduler actions late binding was not being handled
properly at all, from Jamal Hadi Salim.
12) Fix binding of conntrack entries to helpers in openvswitch, from
Joe Stringer"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
gre: do not keep the GRE header around in collect medata mode
openvswitch: Fix cached ct with helper.
net sched: ife action fix late binding
net sched: skbedit action fix late binding
net sched: simple action fix late binding
net sched: mirred action fix late binding
net sched: ipt action fix late binding
net sched: vlan action fix late binding
net: phylib: fix interrupts re-enablement in phy_start
tcp: refresh skb timestamp at retransmit time
net: nps_enet: bug fix - handle lost tx interrupts
net: nps_enet: Tx handler synchronization
export tc ife uapi header
net: thunderx: avoid exposing kernel stack
net: fix a kernel infoleak in x25 module
ravb: Add missing free_irq() call to ravb_close()
uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h
netfilter: nfnetlink_acct: validate NFACCT_QUOTA parameter
iwlwifi: mvm: don't override the rate with the AMSDU len
netfilter: IDLETIMER: fix race condition when destroy the target
...
For ipgre interface in collect metadata mode, it doesn't make sense for the
interface to be of ARPHRD_IPGRE type. The outer header of received packets
is not needed, as all the information from it is present in metadata_dst. We
already don't set ipgre_header_ops for collect metadata interfaces, which is
the only consumer of mac_header pointing to the outer IP header.
Just set the interface type to ARPHRD_NONE in collect metadata mode for
ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset
mac_header.
Fixes: a64b04d86d ("gre: do not assign header_ops in collect metadata mode")
Fixes: 2e15ea390e ("ip_gre: Add support to collect tunnel metadata.")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using conntrack helpers from OVS, a common configuration is to
perform a lookup without specifying a helper, then go through a
firewalling policy, only to decide to attach a helper afterwards.
In this case, the initial lookup will cause a ct entry to be attached to
the skb, then the later commit with helper should attach the helper and
confirm the connection. However, the helper attachment has been missing.
If the user has enabled automatic helper attachment, then this issue
will be masked as it will be applied in init_conntrack(). It is also
masked if the action is executed from ovs_packet_cmd_execute() as that
will construct a fresh skb.
This patch fixes the issue by making an explicit call to try to assign
the helper if there is a discrepancy between the action's helper and the
current skb->nfct.
Fixes: cae3a26275 ("openvswitch: Allow attaching helpers to ct action")
Signed-off-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The x86 exception table sorting was changed in commit 29934b0fb8
("x86/extable: use generic search and sort routines") to use the arch
independent code in lib/extable.c. However, the patch was mangled
somehow on its way into the kernel from the last version posted at [1].
The committed version kind of attempted to incorporate the changes of
commit 548acf1923 ("x86/mm: Expand the exception table logic to allow
new handling options") as in _completely_ _ignoring_ the x86 specific
'handler' member of struct exception_table_entry. This effectively
broke the sorting as entries will only partly be swapped now.
Fortunately, the x86 Kconfig selects BUILDTIME_EXTABLE_SORT, so the
exception table doesn't need to be sorted at runtime. However, in case
that ever changes, we better not break the exception table sorting just
because of that.
[ Ard Biesheuvel points out that BUILDTIME_EXTABLE_SORT applies to the
core image only, but we still rely on the sorting routines for modules
in that case - Linus ]
Fix this by providing a swap_ex_entry_fixup() macro that takes care of
the 'handler' member.
[1] https://lkml.org/lkml/2016/1/27/232
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Fixes: 29934b0fb8 ("x86/extable: use generic search and sort routines")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bunch of small driver specific fixes that have come up, none of them
remarkable in themselves. One fixes a regression introduced in the
merge window and another two are targetted at stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXM1aPAAoJECTWi3JdVIfQ6OEH/i0K+0N0KLHNznOgyk5F6KTZ
kSg03F03UBs66CWVcFEWGtWTBLqlYpmQptJqPSZtOVu99zcVfX8PB+tjWM7zfo/F
cxMVeyiflf/9jiFSH/qXnLDOYKLMBVonv0laS2U0wjLME5UF+kGJfPr9F1w/2uzN
N8KpkHFkdprzuIV9JGqB4CXiZqyDrH+6yV3jIQh1GTeN4DiDST3/tLPkqpETxCHz
/ayfsofi5PLA9126Ogn1De8dds65HTbPTrJbf0jMiH3SGFXsLLK5clDMN9g7aNwK
9Chc75akHsjcdKPEANnR9KmAeZpL53n5nQp8iHoYLPqSlaVeJPVkhrE5yZqbrUc=
=KyrG
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of small driver specific fixes that have come up, none of them
remarkable in themselves. One fixes a regression introduced in the
merge window and another two are targetted at stable"
* tag 'spi-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT
spi: spi-ti-qspi: Handle truncated frames properly
spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden
spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer
spi: spi-fsl-dspi: Fix cs_change handling in message transfer
an objtool warning for CONFIG_PROFILE_ALL_BRANCHES.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXM0h+AAoJEL/70l94x66DhjwH/2l24ouNC32DJGoY511yWogF
QrBrmQnnT1r+v9IDCC5ITCCkJp+EPF0uFwLI+T6URzRdSdNUN/EqYymUyhsICWwb
9xIsR9VraeB4OhH5IMps1Pkwyx6FMjeVqvVx8dib+NUQpV2o5KxkkFsE9oIX7mtA
PgwRaLsV8MFZH06g/qvwYPs5NNUecQU8AFCAps0PzWSXG6KHmzsjJZjsXbDhb3n4
oOGJTLXlRS+SSOWFjngYJNIQ7Z8V1WHM6qftZXtcDWIFbq8CuWn9dZR2WhpUu+nK
J/I5WC99stxgljFOjI/zdPKQbRy0eBQyDAPHAblDo83vSKsDRgYGX3608gGz3xY=
=s75+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Two small x86 patches, improving "make kvmconfig" and fixing an
objtool warning for CONFIG_PROFILE_ALL_BRANCHES"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvmconfig: add more virtio drivers
x86/kvm: Add stack frame dependency to fastop() inline asm
Phoenix Audio has yet another device with another id (even a different
vendor id, 0556:0014) that requires the same quirk for the sample
rate.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI/DP audio output on ATI/AMD chips got broken due to the recent
restructuring of chmap. Fortunately, Daniel Exner could bisect, and
pointed the culprit commit [739ffee97e: ALSA: hda - Add hdmi chmap
verb programming ops to chmap object].
This commit moved some ops from hdmi_ops to chmap_ops, and reassigned
the ops in the embedded chmap object in hdmi_spec instead.
Unfortunately, the reassignment of these ops in patch_atihdmi() were
moved into an if block that is performed only for old chips. Thus, on
newer chips, the generic ops is still used, which doesn't work for
such ATI/AMD chips.
This patch addresses the regression, simply by moving the assignment
of chmap ops to the right place.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114981
Fixes: 739ffee97e ('ALSA: hda - Add hdmi chmap verb programming ops to chmap object')
Reported-and-tested-by: Daniel Exner <dex@dragonslave.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jamal Hadi Salim says:
====================
Some actions were broken in allowing for late binding of actions.
Late binding workflow is as follows:
a) create an action and provide all necessary parameters for it
Optionally provide an index or let the kernel give you one.
Example:
sudo tc actions add action police rate 1kbit burst 90k drop index 1
b) later on bind to the pre-created action from a filter definition
by merely specifying the index.
Example:
sudo tc filter add dev lo parent ffff: protocol ip prio 8 \
u32 match ip src 127.0.0.8/32 flowid 1:8 action police index 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add an ife action and give it an instance id of 1
sudo tc actions add action ife encode \
type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1
//create a filter which binds to ife action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1
Message before fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add a skbedit action and give it an instance id of 1
sudo tc actions add action skbedit mark 10 index 1
//create a filter which binds to skbedit action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1
Message before fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add a simple action and give it an instance id of 1
sudo tc actions add action simple sdata "foobar" index 1
//create a filter which binds to simple action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1
Message before fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add an mirred action and give it an instance id of 1
sudo tc actions add action mirred egress mirror dev $MDEV index 1
//create a filter which binds to mirred action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1
Message before bug fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was broken and is fixed with this patch.
//add an ipt action and give it an instance id of 1
sudo tc actions add action ipt -j mark --set-mark 2 index 1
//create a filter which binds to ipt action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1
Message before bug fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Late vlan action binding was broken and is fixed with this patch.
//add a vlan action to pop and give it an instance id of 1
sudo tc actions add action vlan pop index 1
//create filter which binds to vlan action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \
match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1
current message(before bug fix) was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If phy was suspended and is starting, current driver always enable
phy's interrupts, if phy works in polling, phy can raise unexpected
interrupt which will not be handled, the interrupt will block system
enter suspend again. So interrupts should only be re-enabled if phy
works in interrupt.
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the very unlikely case __tcp_retransmit_skb() can not use the cloning
done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing
the copy and transmit, otherwise TCP TS val will be an exact copy of
original transmit.
Fixes: 7faee5c0d5 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Elad Kanfi says:
====================
nps_enet: Net driver bugs fix
v3:
tx_packet_sent flag is not necessary, use socket buffer pointer
instead.
Use wmb() instead of smp_wmb().
v2:
Remove code style commit for now.
Code style commit will be added after the bugs fix will be approved.
Summary:
1. Bug description: TX done interrupts that arrives while interrupts
are masked, during NAPI poll, will not trigger an interrupt handling.
Since TX interrupt is of level edge we will lose the TX done interrupt.
As a result all pending tx frames will get no service.
Solution: Check if there is a pending tx request after unmasking the
interrupt and if answer is yes then re-add ourselves to
the NAPI poll list.
2. Bug description: CPU-A before sending a frame will set a variable
to true. CPU-B that executes the tx done interrupt service routine
might read a non valid value of that variable.
Solution: Use the socket buffer pointer instead of the variable,
and add a write memory barrier at the tx sending function after
the pointer is set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx interrupt is of edge type, and in case such interrupt is triggered
while it is masked it will not be handled even after tx interrupts are
re-enabled in the end of NAPI poll.
This will cause tx network to stop in the following scenario:
* Rx is being handled, hence interrupts are masked.
* Tx interrupt is triggered after checking if there is some tx to handle
and before re-enabling the interrupts.
In this situation only rx transaction will release tx requests.
In order to handle the tx that was missed( if there was one ),
a NAPI reschdule was added after enabling the interrupts.
Signed-off-by: Elad Kanfi <eladkan@mellanox.com>
Acked-by: Noam Camus <noamca@mellanox.com>
Acked-by: Gilad Ben-Yossef <giladby@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Below is a description of a possible problematic
sequence. CPU-A is sending a frame and CPU-B handles
the interrupt that indicates the frame was sent. CPU-B
reads an invalid value of tx_packet_sent.
CPU-A CPU-B
----- -----
nps_enet_send_frame
.
.
tx_skb = skb
tx_packet_sent = true
order HW to start tx
.
.
HW complete tx
------> get tx complete interrupt
.
.
if(tx_packet_sent == true)
handle tx_skb
end memory transaction
(tx_packet_sent actually
written)
Furthermore there is a dependency between tx_skb and tx_packet_sent.
There is no assurance that tx_skb contains a valid pointer at CPU B
when it sees tx_packet_sent == true.
Solution:
Initialize tx_skb to NULL and use it to indicate that packet was sent,
in this way tx_packet_sent can be removed.
Add a write memory barrier after setting tx_skb in order to make sure
that it is valid before HW is informed and IRQ is fired.
Fixed sequence will be:
CPU-A CPU-B
----- -----
tx_skb = skb
wmb()
.
.
order HW to start tx
.
.
HW complete tx
------> get tx complete interrupt
.
.
if(tx_skb != NULL)
handle tx_skb
tx_skb = NULL
Signed-off-by: Elad Kanfi <eladkan@mellanox.com>
Acked-by: Noam Camus <noamca@mellanox.com>
Acked-by: Gilad Ben-Yossef <giladby@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enumeration
Fix BUG on device attach failure (Lukas Wunner)
Do not treat EPROBE_DEFER as device attach failure (Lukas Wunner)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXMhfBAAoJEFmIoMA60/r82rcQAIZUMKvp+z3U2mubYWro3G55
kjUWb7olV5BqO8TJqdo7f3OPjLCPus0c60BFcivfQuBOXNNfN85NDn6/eisv9X85
SyjnhnCeaBxt6sejFhhlP3ksHny4JewoPCNcOMpyCnB6SWeJ3U2vRrJjmqKOaMWV
Bj2BqS5/qwWmumbH5PmhNHVVzAClBmpJGLsO4qSoY9ST3k4bzVwJpPMjNIACVpzQ
jdD9efkOA8TapOIk14qiPmdHk6stwvvkewMoZYxa70TEKynJUOVbRDU+zgqzvcxG
TngB99uz40Zzc8x6ln66ew0w5jsej4oTTqc6yX4zUzCwEUeuSw5NBgPRAcbK1aYX
fU8b50n/BoA5S5zzT7aLSu1+Z96mRcqe9isSHWqzJ5gmMK+k2SZ9QaZe2VTywD3H
rkTBYPfoYXgcRLBQ2QrhAv8E1yD06ABZ10gxVGlvdvBMKH3LjwyCoLNIefq9vkga
/h1TqT2QlC9QU7X6YigYmO/DjBzdZ0Hkc37x9xw9vwWkJ6KTESU46tICJXt5VrLD
mLzN2J6K/yePNMC5AMIeFvJGwEQaqNEiZiLFCzvE86HfdfOfe1Vvf2yut12InX7A
gaMbelL+wNmT5quaepqG1pPKeWVYkvKYnXl8W6vPtDxFaipwBYYPnuPlyoS6zRdi
yZDHyiyzo2CaYyd6nRJU
=UX0T
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.6-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Since v4.5, we've WARNed during resume if a PCI device, including a
Thunderbolt device, was added while we were suspended. A change we
merged for v4.6-rc1 turned that warning into a system hang. These
enumeration patches from Lukas Wunner fix this issue:
- Fix BUG on device attach failure
- Do not treat EPROBE_DEFER as device attach failure"
* tag 'pci-v4.6-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Do not treat EPROBE_DEFER as device attach failure
PCI: Fix BUG on device attach failure
Pull x86 fixes from Ingo Molnar:
"Two topology corner case fixes, and a MAINTAINERS file update for
mmiotrace maintenance"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Set x86_max_cores to 1 for CONFIG_SMP=n
MAINTAINERS: Add mmiotrace entry
x86/topology: Handle CPUID bogosity gracefully
Pull scheduler fixes from Ingo Molnar:
"A UP kernel cpufreq fix and a rt/dl scheduler corner case fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, sched/dl: Don't push if task's scheduling class was changed
sched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage
"make defconfig kvmconfig" is supposed to end up with usable kernel for
KVM guest. In practice, it won't work for e.g. Hetzner VPS (KVM-based)
unless you add these options.
Signed-off-by: Andrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kbuild test robot reported this objtool warning [1]:
arch/x86/kvm/emulate.o: warning: objtool: fastop()+0x69: call without frame pointer save/setup
The issue seems to be caused by CONFIG_PROFILE_ALL_BRANCHES. With that
option, for some reason gcc decides not to create a stack frame in
fastop() before doing the inline asm call, which can result in a bad
stack trace.
Force a stack frame to be created if CONFIG_FRAME_POINTER is enabled by
listing the stack pointer as an output operand for the inline asm
statement.
This change has no effect for !CONFIG_PROFILE_ALL_BRANCHES.
[1] https://lists.01.org/pipermail/kbuild-all/2016-March/018249.html
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HD-audio reconfig function got broken in the recent kernels,
typically resulting in a failure like:
snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present
This is because of the code restructuring to move the PCM and control
instantiation into the codec drive probe, by the commit [bcd96557bd:
ALSA: hda - Build PCMs and controls at codec driver probe]. Although
the commit above removed the calls of snd_hda_codec_build_pcms() and
*_build_controls() at the controller driver probe, the similar calls
in the reconfig were still left forgotten. This caused the
conflicting and duplicated PCMs and controls.
The fix is trivial: just remove these superfluous calls from
reconfig_codec().
Fixes: bcd96557bd ('ALSA: hda - Build PCMs and controls at codec driver probe')
Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We got this warning:
WARNING: CPU: 1 PID: 2468 at kernel/sched/core.c:1161 set_task_cpu+0x1af/0x1c0
[...]
Call Trace:
dump_stack+0x63/0x87
__warn+0xd1/0xf0
warn_slowpath_null+0x1d/0x20
set_task_cpu+0x1af/0x1c0
push_dl_task.part.34+0xea/0x180
push_dl_tasks+0x17/0x30
__balance_callback+0x45/0x5c
__sched_setscheduler+0x906/0xb90
SyS_sched_setattr+0x150/0x190
do_syscall_64+0x62/0x110
entry_SYSCALL64_slow_path+0x25/0x25
This corresponds to:
WARN_ON_ONCE(p->state == TASK_RUNNING &&
p->sched_class == &fair_sched_class &&
(p->on_rq && !task_on_rq_migrating(p)))
It happens because in find_lock_later_rq(), the task whose scheduling
class was changed to fair class is still pushed away as if it were
a deadline task ...
So, check in find_lock_later_rq() after double_lock_balance(), if the
scheduling class of the deadline task was changed, break and retry.
Apply the same logic to RT tasks.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Link: http://lkml.kernel.org/r/1462767091-1215-1-git-send-email-xlpang@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josef reported that the uncore driver trips over with CONFIG_SMP=n because
x86_max_cores is 16 instead of 12.
The reason is, that for SMP=n the extended topology detection is a NOOP and
the cache leaf is used to determine the number of cores. That's wrong in two
aspects:
1) The cache leaf enumerates the maximum addressable number of cores in the
package, which is obviously not correct
2) UP has no business with topology bits at all.
Make intel_num_cpu_cores() return 1 for CONFIG_SMP=n
Reported-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team <Kernel-team@fb.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/761b4a2a-0332-7954-f030-c6639f949612@fb.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contain Netfilter simple fixes for your net tree,
two one-liner and one two-liner:
1) Oneliner to fix missing spinlock definition that triggers
'BUG: spinlock bad magic on CPU#' when spinlock debugging is enabled,
from Florian Westphal.
2) Fix missing workqueue cancelation on IDLETIMER removal,
from Liping Zhang.
3) Fix insufficient validation of netlink of NFACCT_QUOTA in
nfnetlink_acct, from Phil Turnbull.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reserved fields should be set to zero to avoid exposing
bits from the kernel stack.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stack object "dte_facilities" is allocated in x25_rx_call_request(),
which is supposed to be initialized in x25_negotiate_facilities.
However, 5 fields (8 bytes in total) are not initialized. This
object is then copied to userland via copy_to_user, thus infoleak
occurs.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reopening the network device on ra7795/salvator-x, e.g. after a
DHCP timeout:
IP-Config: Reopening network devices...
genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac)
ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac
IP-Config: Failed to open eth0
IP-Config: No network devices available
The "mismatch" is due to requesting an IRQ that is already in use,
while IRQF_PROBE_SHARED wasn't set.
However, the real cause is that ravb_close() doesn't release the R-Car
Gen3-specific secondary IRQ.
Add the missing free_irq() call to fix this.
Fixes: 22d4df8ff3 ("ravb: Add support for r8a7795 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
glibc's net/if.h contains copies of definitions from linux/if.h and these
conflict and cause build failures if both files are included by application
source code. Changes in uapi headers, which fixed header file dependencies to
include linux/if.h when it was needed, e.g. commit 1ffad83d, made the
net/if.h and linux/if.h incompatibilities visible as build failures for
userspace applications like iproute2 and xtables-addons.
This patch fixes compile errors when glibc net/if.h is included before
linux/if.h:
./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’
./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’
./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’
./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’
./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’
./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’
./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’
./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’
./linux/if.h:252:8: error: redefinition of ‘struct ifconf’
./linux/if.h:203:8: error: redefinition of ‘struct ifreq’
./linux/if.h:169:8: error: redefinition of ‘struct ifmap’
./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’
./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’
./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’
./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’
./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’
./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’
./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’
./linux/if.h💯23: error: redeclaration of enumerator ‘IFF_PROMISC’
The cases where linux/if.h is included before net/if.h need a similar fix in
the glibc side, or the order of include files can be changed userspace
code as a workaround.
This change was tested in x86 userspace on Debian unstable with
scripts/headers_compile_test.sh:
$ make headers_install && \
cd usr/include && ../../scripts/headers_compile_test.sh -l -k
...
cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h
PASSED libc before kernel test: ./linux/if.h
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Stephen Hemminger <shemming@brocade.com>
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull libnvdimm build fix from Dan Williams:
"A build fix for the usage of HPAGE_SIZE in the last libnvdimm pull
request.
I have taken note that the kbuild robot build success test does not
include results for alpha_allmodconfig. Thanks to Guenter for the
report. It's tagged for -stable since the original fix will land
there and cause build problems"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pfn: fix ARCH=alpha allmodconfig build failure
Allowing unprivileged kernel profiling lets any user dump follow kernel
control flow and dump kernel registers. This most likely allows trivial
kASLR bypassing, and it may allow other mischief as well. (Off the top
of my head, the PERF_SAMPLE_REGS_INTR output during /dev/urandom reads
could be quite interesting.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
