This fixes all coding style issues and some spelling mistakes.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There was a buffer overflow in the original code. rf_path was 2 and it should
have been only 0 or 1.
I don't have the hardware for this, so I can't test it.
Looking at the code, there are two almost identical sections for updating the
hal variables. The first one was clearly wrong and had the array overflow as
well. The second one looked correct. I decided to use the second section as
is except for whitespace changes.
The differences between the two original sections:
1) The second one had more debug output.
2) The second one looped over rf_path instead of corrupting data.
3) The second one had these additional assigments.
if (rf_path == 0) {
priv->TxPowerLevelOFDM24G[i] = priv->RfTxPwrLevelOfdm1T[rf_path][i] ;
priv->TxPowerLevelCCK[i] = priv->RfTxPwrLevelCck[rf_path][i];
}
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jerry chuang <wlanfae@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Olaf Hartmann <o.hartmann@telovital.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A 33 char ESSID is too long and it could cause a buffer overflow
a couple lines below when we put a NULL terminator on the end.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
medusa_set_videostandard() takes the lock but it always drops it before
returning.
This was found with a static checker and compile tested only. :/
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The check for dio_num_asics is used to determine if there is more than 1 irq.
If it is false then irq[1] is past the end of the array.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove compatibility code as this is not an older version of the kernel.
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sizeof() returns a size_t but the other types involved
are unsigned long, so using min() results in a warning.
As sizeof() is called on an 11 character buffer defined
immediately above unsigned long is obviously wide enough
for the result.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ieee80211_crypto_tkip_exit(), ieee80211_crypto_deinit() and
ieee80211_crypto_ccmp_exit() are called by ieee80211_rtl_init()
which are in section __init, so they can't be in section __exit.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
$ make CONFIG_DEBUG_SECTION_MISMATCH=y
WARNING: drivers/staging/rt2870/rt2870sta.o(.text+0x2f4c5): Section
mismatch in reference from the function rtusb_probe() to the function .devinit.text:rt2870_probe()
The function rtusb_probe() references
the function __devinit rt2870_probe().
This is often because rtusb_probe lacks a __devinit
annotation or the annotation of rt2870_probe is wrong.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The use of pci_find_device() is deprecated.
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The HV core mucks around with specific irqs and other low-level stuff
and takes forever to determine that it really shouldn't be running on a
machine. So instead, trigger off of the DMI system information and
error out much sooner. This also allows the module loading tools to
recognize that this code should be loaded on this type of system.
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This allows the HV core to be properly found and autoloaded
by the system tools.
It uses the Microsoft virtual VGA device to trigger this.
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the Channel.c file that fixes up a brace
warning found by checkpatch.pl
Signed-off-by: Chris Nicholson <chris.nicholson@cnick.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename struct device_context and re-arrange the fields inside.
Rename struct device_context to struct vm_device, and move struct device
field to the end according to Document/driver-model standard.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Provide proper versioning information for all HV drivers.
With removal of build time/date/and Minor number as requested by Greg KH
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyang@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the RingBuffer.c file that corrects various coding style
warnings and errors found by checkpatch.pl
[ The real solution here is to get rid of this file entirely, and use the
kernel's internal ring buffer api, but until then, make these changes so as to
make checkpatch.pl happy, and keep others from continuously sending this type
of patch. - gkh]
Signed-off-by: Craig Bartlett <c-bartlett@hotmail.co.uk>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Nicolas Palix <npalix@diku.dk>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed legacy XEN layer from hypervisor setup, and made sure only
Hyper-V is Is a valid hypervisor to run on.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the callback pointer was removed, we can remove
the code itself, as it is never used.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback was never called, so delete the thing.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A non-integer changes the aggregation mode. Therefore this patch changes
the behaviour to explicitly check strict_strtoul()'s return code.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since we are now part of mainline, we don't need compat.h to allow
building of the module with old versions of the kernel.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
printk() since kernel version 2.6.29 has supported printing MAC
addresses directly, as an extension to the %p processing. This patch
makes use of this for printk() and bat_dbg(). This will remove the
overhead of using addr_to_string() which is normally never actually
output.
Fixed a typo found by Gus Wirth.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some embedded devices have very limited sources of entropy for the
random number generator. It has been observed that the random MAC
address on the interface bat0 is not always random. When testing with
a collection of identical hardware, sometimes the bat0 device the same
MAC address on multiple devices, causing mayhem. This patch allows the
MAC address to be set by the user.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the (ugly and racy) packet receiving thread and the
kernel socket usage. Instead, packets are received directly by registering
the ethernet type and handling skbs instead of self-allocated buffers.
Some consequences and comments:
* we don't copy the payload data when forwarding/sending/receiving data
anymore. This should boost performance.
* packets from/to different interfaces can be (theoretically) processed
simultaneously. Only the big originator hash lock might be in the way.
* no more polling or sleeping/wakeup/scheduling issues when receiving
packets
* this might introduce new race conditions.
* aggregation and vis code still use packet buffers and are not (yet)
converted.
* all spinlocks were converted to irqsave/restore versions to solve
some lifelock issues when preempted. This might be overkill, some
of these locks might be reverted later.
* skb copies are only done if neccesary to avoid overhead
performance differences:
* we made some "benchmarks" with intel laptops.
* bandwidth on Gigabit Ethernet increased from ~500 MBit/s to ~920 MBit/s
* ping latency decresed from ~2ms to ~0.2 ms
I did some tests on my 9 node qemu environment and could confirm that
usual sending/receiving, forwarding, vis, batctl ping etc works.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
there are some kmallocs left which are not checked whether they succeeds or
not, which might lead to corrupted data structures if the system memory is
full. This patch should clean up the remaining unchecked kmalloc()s.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The /proc vis file was used to enable/disable the vis server and to output
the vis data at the same time. This behaviour was confusing and lacked a
proper method to display the current vis server status.
This patch seperates the 2 functionalities:
* use vis_server to enable/disable the vis server and to retrieve its status
* use vis_data to retrieve the vis raw data (if the server is enabled)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv used to export the vis data using different formats that were
switchable via /proc/net/batman-adv/vis_format. The various formats moved
to user space and rendered this configuration switch useless.
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The batman-adv kernel module is able to output visualization data using the
dot draw or JSON format. This patch transforms the output into a generic
format (called vis raw). User space tool may convert the raw data to support
a variety of formats without the need of modifying the kernel module.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The originator table contained a TAB instead of a space which broke
the layout as well as the batctl parser.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches fixes two rounding issues in vis.c for sending and
purging vis packets. Before, the timers and timeouts always got
rounded down to seconds, though we want a precision in
milliseconds.
This also fixes a kernel panic that occures when lowering the
timer for sending vis packets (vis_interval) to less than 1000ms
in main.c manually.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
forw_bcast_list_lock is spin_locked in both process and softirq context.
SoftIRQ calls the spinlock with disabled IRQ and normal process context
with enabled IRQs.
When process context is inside an spin_locked area protected by
forw_bcast_list_lock and gets interrupted by an IRQ, it could happen
that something tries to lock forw_bcast_list_lock again in SoftIRQ
context. It cannot proceed further since the lock is already taken
somewhere else, but no reschedule will happen inside the SoftIRQ
context. This leads to an complete kernel hang without any chance of
resurrection.
All functions called in process context must disable IRQs when they try
to get get that lock to to prevent any reschedule due to IRQs.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
we have written "neighbors", "neighbours" and bad spelled versions of this
word, this patch should make it consistent.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
instead of dynamically registering hash iterators, calling functions are
changed to register the iterator objects statically. The two advantages are:
* no memory leaks when aborting from hash_iterate()
* no calls to kmalloc/kfree, therefore a little faster/safer
Tested with 9 QEMU instances, no obvious regression found.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ameya Palande requested we replace printk(KERN_DEBUG "") by pr_debug()
I decided it was better to use our debug macro.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
state in the README that we also (compile) support 2.6.32
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is safe to call kfree(NULL) which makes this extra check unneeded. It
was found using checkpatch.pl from linux-2.6
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
`i' reaches 101 after the loop, so if it was 100 then it succeeded in
the last iteration. This is probably unlikely to cause problems.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
