I was about to simplify the call to i2c_unregister_device() when I
realized that converting to devm_i2c_new_dummy_device() will simplify
the driver a lot. So I took this approach.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190830133124.21633-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
I was about to simplify the call to i2c_unregister_device() when I
realized that converting to devm_i2c_new_dummy_device() will simplify
the driver a lot. So I took this approach.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190830133124.21633-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Issue:
- # hwclock -w
hwclock: RTC_SET_TIME: Invalid argument
Why:
- Relative commit: 8b9f9d4dc5 ("regmap: verify if register is
writeable before writing operations"), this patch
will always check for unwritable registers, it will compare reg
with max_register in regmap_writeable.
- The pcf85363/pcf85263 has the capability of address wrapping
which means if you access an address outside the allowed range
(0x00-0x2f) hardware actually wraps the access to a lower address.
The rtc-pcf85363 driver will use this feature to configure the time
and execute 2 actions in the same i2c write operation (stopping the
clock and configure the time). However the driver has also
configured the `regmap maxregister` protection mechanism that will
block accessing addresses outside valid range (0x00-0x2f).
How:
- Split of writing regs to two parts, first part writes control
registers about stop_enable and resets, second part writes
RTC time and date registers.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Link: https://lore.kernel.org/r/20190829021418.4607-1-biwen.li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20190716071858.36750-1-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Disable watchdog registation when kernel is build without
watchdog functionality, and enable watchdog core otherwise.
This removes compile errors like the one below:
drivers/rtc/rtc-pcf2127.o: in function `pcf2127_probe.constprop.3':
rtc-pcf2127.c:(.text.unlikely+0x2c8): undefined reference to
`devm_watchdog_register_device'
Watchdog feature in chip will always be configured as
this is safe to do in both cases and minimize code churn.
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: YueHaibing <yuehaibing@huawei.com>
Fixes: bbc597561ce1 ("rtc: pcf2127: add watchdog feature support")
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20190827143656.4734-1-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for integrated tamper detection function in both PCF2127 and
PCF2129 chips. This patch implements the feature by adding an additional
timestamp0 file to sysfs device path. This file contains seconds since
epoch, if an event occurred, or is empty, if none occurred.
Interface should match ISL1208 and RV3028 RTC drivers.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20190822131936.18772-5-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add partial support for the watchdog functionality of
both PCF2127 and PCF2129 chips.
The programmable watchdog timer is currently using a fixed
clock source of 1Hz. This result in a selectable range of
1-255 seconds, which covers most embedded Linux use-cases.
Clock sources of 4096Hz, 64Hz and 1/60Hz is mostly useful
in MCU use-cases.
Countdown timer not available when using watchdog feature.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190822131936.18772-4-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The previous fix listed bulk read of registers as root cause of
accendential disabling of watchdog, since the watchdog counter
register (WD_VAL) was zeroed.
Fixes: 3769a375ab rtc: pcf2127: bulk read only date and time registers.
Tested with the same PCF2127 chip as Sean reveled root cause
of WD_VAL register value zeroing was caused by reading CTRL2
register which is one of the watchdog feature control registers.
So the solution is to not read the first two control registers
(CTRL1 and CTRL2) in pcf2127_rtc_read_time as they are not
needed anyway. Size of local buf variable is kept to allow
easy usage of register defines to improve readability of code.
Debug trace line was updated after CTRL1 and CTRL2 are no longer
read from the chip. Also replaced magic numbers in buf access
with register defines.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20190822131936.18772-3-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cleanup of defines to follow kernel coding style and increase code
readability by using same register and bit define style.
Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as
kernel coding guide section 12 'Macros, Enums and RTL' states
"Names of macros defining constants and labels in enums are capitalized".
Improve readability of RAM register comment by making whole sentences.
Remove parentheses from register defines as they are only used
for expressions and not constants.
As there are no clear style for name of registers and bits in the
kernel drivers, I suggest the following for at least this driver,
but hopefully also other RTC drivers.
Register name should follow this convention:
[chip]_REG_[reg name] 0xXX
Bit name should follow this convention, so it clearly states which
chip register it's part of:
[chip]_BIT_[reg name]_[bit name] BIT(X)
Additionally I suggest bit defines are always placed right below
its corresponding register define and using an extra tab indentation
for the BIT(X) part. This will visually make it easy to see that bit
defines are part of the complete register definition.
Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below
PCF2127_REG_SC. This will improve readability of bit checks as it's
easy to verify that it uses the correct register.
Move end of line comments above register defines as it's more like
a heading for 1 register define and up to 8 bit defines or a
collection of registers that are close related like timestamp
split across 6 registers.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC on H6 is mostly the same as on H5 and H3. It has slight differences
mostly in features that are not yet supported by this driver.
Some differences are already stated in the comments in existing code.
One other difference is that H6 has extra bit in LOSC_CTRL_REG, called
EXT_LOSC_EN to enable/disable external low speed crystal oscillator.
It also has bit EXT_LOSC_STA in LOSC_AUTO_SWT_STA_REG, to check whether
external low speed oscillator is working correctly.
This patch adds support for enabling LOSC when necessary:
- during reparenting
- when probing the clock
H6 also has capacbility to automatically reparent RTC clock from
external crystal oscillator, to internal RC oscillator, if external
oscillator fails. This is enabled by default. Disable it during
probe.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20190820151934.3860-3-megous@megous.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC on H6 is similar to the one on H5 SoC, but incompatible in small
details. See the driver for description of differences. For example
H6 RTC needs to enable the external low speed oscillator. Add new
compatible for this RTC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20190820151934.3860-2-megous@megous.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For the platforms including LS1012A, LS1021A, LS1028A, LS1043A,
LS1046A, LS1088A, LS208xA that has the FlexTimer
module, implementing alarm functions within RTC subsystem
to wakeup the system when system going to sleep (work with RCPM driver).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Link: https://lore.kernel.org/r/20190813030157.48590-1-biwen.li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Amlogic Meson GX SoCs uses a special register to store the
time in seconds to wakeup after a system suspend.
In order to be able to reuse the RTC wakealarm feature, this
driver implements a fake RTC device which uses the system time
to deduce a suspend delay.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: rebase to v5.3-rc, rework and modernization]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add binding fo the new VRTC driver for Amlogic SoCs. The 64-bit
family of SoCs only has an RTC managed by firmware, and this VRTC
driver provides the simple, one-register firmware interface.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20190812232850.8016-2-khilman@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
My error handling "cleanup" was totally wrong. Both the "err" and "ret"
variables are required. The "err" variable holds the error codes for
rv3029_eeprom_enter/exit() and the "ret" variable holds the error codes
for if actual write fails. In my patch if the write failed, the
function probably still returned success.
Reported-by: Tom Evans <tom.evans@motec.com.au>
Fixes: 97f5b0379c ("rtc: rv3029: Clean up error handling in rv3029_eeprom_write()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190817065604.GB29951@mwanda
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC core now has error messages in case of registration failure, there
is no need to have other messages in the drivers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190818220041.17833-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a message when __rtc_register_device fails because rtc->ops is NULL.
This may only happen when developing a new driver so use dev_dbg to avoid
compiling it in by default.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190818220041.17833-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
nxp,rtc-pcf2123 is not a proper compatible strong for this RTC. The part
name is only pcf2123 and is less confusing.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-9-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Set the RTC range properly and use the core windowing and offsetting to
(unfortunately) map back to a 1970-2069 range.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-8-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This allows further improvement of the driver. Also remove the unecessary
error string as the core will already display error messages.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-7-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
kfree_exit only returns ret, remove it. This also fixes the
devm_regmap_init_spi error case where the probe wouldn't actually fail
because ret is initialized to 0.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-6-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rename struct pcf2123_plat_data to struct pcf2123_data and pdata to
pcf2123 to make the driver use a more common subsystem style.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-5-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Clear the flag after disabling the alarm to ensure the alarm doesn't fire
between clearing the flag and disabling the alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The week day may not be set properly by userspace. This would result is
missed alarms. Disable alarm matching on weekday.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-40-swboyd@chromium.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As spin_unlock_irq will enable interrupts.
mxc_rtc_irq_enable is called from interrupt handler mxc_rtc_interrupt.
Interrupts are enabled in interrupt handler.
Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq
in IRQ context to avoid this.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190807082310.10135-1-huangfq.daxian@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
With CONFIG_BD70528_WATCHDOG=m, a built-in rtc driver cannot call
into the low-level functions that are part of the watchdog module:
drivers/rtc/rtc-bd70528.o: In function `bd70528_set_time':
rtc-bd70528.c:(.text+0x22c): undefined reference to `bd70528_wdt_lock'
rtc-bd70528.c:(.text+0x2a8): undefined reference to `bd70528_wdt_unlock'
drivers/rtc/rtc-bd70528.o: In function `bd70528_set_rtc_based_timers':
rtc-bd70528.c:(.text+0x50c): undefined reference to `bd70528_wdt_set'
Add a Kconfig dependency which forces RTC to be a module if watchdog is a
module. If watchdog is not compiled at all the stub functions for watchdog
control are used. compiling the RTC without watchdog is fine.
Fixes: 32a4a4ebf7 ("rtc: bd70528: Initial support for ROHM bd70528 RTC")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/84462e01e43d39024948a3bdd24087ff87dc2255.1565591387.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190722172618.4061-5-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190722172618.4061-4-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190722172618.4061-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190722172618.4061-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The PCF8563 has a binding of its own, with some, clocks related, additional
properties.
Remove it from the trivial RTC bindings.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190722140921.22681-1-maxime.ripard@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/20190717081411.30622-1-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/20190717081217.30518-1-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix several warnings/errors in validation of binding schemas.
-----BEGIN PGP SIGNATURE-----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=IkH4
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"Fix several warnings/errors in validation of binding schemas"
* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
Pull vfs documentation typo fix from Al Viro.
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
typo fix: it's d_make_root, not d_make_inode...
Alexandre Belloni