Maciej W. Rozycki b45d527974 sb1250-duart.c: SB1250 DUART serial support ... This is a driver for the SB1250 DUART, a dual serial port implementation included in the Broadcom family of SOCs descending from the SiByte SB1250 MIPS64 chip multiprocessor. It is a new implementation replacing the old-fashioned driver currently present in the linux-mips.org tree. It supports all the usual features one would expect from a(n asynchronous) serial driver, including modem line control (as far as hardware supports it -- there is edge detection logic missing from the DCD and RI lines and the driver does not implement polling of these lines at the moment), the serial console, BREAK transmission and reception, including the magic SysRq. The receive FIFO threshold is not maintained though. The driver was tested with a SWARM board which uses a BCM1250 SOC (which is dual MIPS64 CMP) and has both ports of the single DUART implemented wired externally. Both were tested. Testing included using the ports as terminal lines at 1200bps (which is the ports minimum), 115200bps and a couple of random speeds inbetween. The modem lines were verified to operate correctly. No testing was performed with a use as a network interface, like with SLIP or PPP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2007-07-17 10:23:03 -07:00
..
cpm_uart	[POWERPC] CPM_UART: Use inline function form of eieio	2007-07-10 00:33:19 -05:00
jsm	PCI: Change all drivers to use pci_device->revision	2007-07-11 16:02:10 -07:00
8250.c	serial: convert early_uart to earlycon for 8250	2007-07-16 09:05:35 -07:00
8250.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
8250_accent.c	…
8250_acorn.c	[ARM] ecard: add ecardm_iomap() / ecardm_iounmap()	2007-05-11 17:19:02 +01:00
8250_au1x00.c	[SERIAL] AMD Alchemy UART: claim memory range	2006-04-30 11:15:58 +01:00
8250_boca.c	…
8250_early.c	serial: convert early_uart to earlycon for 8250	2007-07-16 09:05:35 -07:00
8250_exar_st16c554.c	[PATCH] Exar quad port serial	2006-12-07 08:39:35 -08:00
8250_fourport.c	…
8250_gsc.c	[PARISC] Clean up asm-parisc/serial.h	2006-10-04 06:47:03 -06:00
8250_hp300.c	[PATCH] hp300: fix driver_register() return handling, remove dio_module_init()	2006-03-25 08:22:53 -08:00
8250_hub6.c	…
8250_mca.c	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
8250_pci.c	[PATCH] remove many unneeded #includes of sched.h	2007-02-14 08:09:54 -08:00
8250_pnp.c	[PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c	2007-03-23 11:01:22 -07:00
21285.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
68328serial.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
68328serial.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
68360serial.c	68360serial: remove broken optimisation	2007-07-16 09:05:51 -07:00
Kconfig	sb1250-duart.c: SB1250 DUART serial support	2007-07-17 10:23:03 -07:00
Makefile	sb1250-duart.c: SB1250 DUART serial support	2007-07-17 10:23:03 -07:00
amba-pl010.c	[ARM] Fix 4417/1: Serial: Fix AMBA drivers locking	2007-06-05 19:39:49 +01:00
amba-pl011.c	[ARM] 4417/1: Serial: Fix AMBA drivers locking	2007-05-30 14:33:01 +01:00
atmel_serial.c	atmel_serial: fix break handling	2007-07-16 09:05:45 -07:00
atmel_serial.h	[ARM] 4357/1: AT91: Support slower serial baud-rates	2007-05-03 14:12:45 +01:00
bfin_5xx.c	Blackfin serial driver: supporting BF548-EZKIT serial port	2007-07-12 16:43:46 +08:00
clps711x.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
crisv10.c	[PATCH] Char: tty_wakeup cleanup	2007-02-11 10:51:26 -08:00
dz.c	[PATCH] dz: remove struct pt_regs references	2007-03-05 07:57:51 -08:00
dz.h	[PATCH] dz: Fixes to make it work	2006-12-07 08:39:41 -08:00
icom.c	icom: add new sub-device-id to support new adapter	2007-05-17 05:23:05 -07:00
icom.h	do not truncate irq number for icom adapter	2007-04-24 08:23:08 -07:00
imx.c	[ARM] 4328/1: Move i.MX UART regs to driver	2007-05-03 20:24:21 +01:00
ioc3_serial.c	[PATCH] serial: replace kmalloc+memset with kzalloc	2007-02-14 08:09:52 -08:00
ioc4_serial.c	[PATCH] serial: replace kmalloc+memset with kzalloc	2007-02-14 08:09:52 -08:00
ip22zilog.c	Update zilog timeout	2007-07-16 09:05:42 -07:00
ip22zilog.h	…
m32r_sio.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
m32r_sio.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
m32r_sio_reg.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
mcfserial.c	[PATCH] m68knommu: fix work queues in mcfserial.c driver	2007-03-06 18:08:38 -08:00
mcfserial.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
mpc52xx_uart.c	[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console	2007-05-07 20:31:15 +10:00
mpsc.c	serial: clear proper MPSC interrupt cause bits	2007-06-28 11:38:29 -07:00
mux.c	Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git	2007-02-17 00:18:23 -05:00
netx-serial.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
of_serial.c	[POWERPC] of_serial: add port type checking	2007-07-10 21:53:42 +10:00
pmac_zilog.c	[POWERPC] Rename device_is_compatible to of_device_is_compatible	2007-05-07 20:31:14 +10:00
pmac_zilog.h	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c	[PATCH] PNX8550 UART driver	2007-02-14 08:09:52 -08:00
pxa.c	[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX	2007-04-21 23:14:01 +01:00
s3c2410.c	SPIN_LOCK_UNLOCKED cleanup in drivers/serial	2007-05-08 11:15:11 -07:00
sa1100.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
sb1250-duart.c	sb1250-duart.c: SB1250 DUART serial support	2007-07-17 10:23:03 -07:00
serial_core.c	serial: assert DTR for serial console devices	2007-07-16 09:05:34 -07:00
serial_cs.c	PCMCIA-NETDEV : add new ID of lan&modem multifunction card	2007-07-08 22:16:39 -04:00
serial_ks8695.c	[ARM] 4411/1: KS8695: Another serial driver fix	2007-05-30 13:15:19 +01:00
serial_lh7a40x.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
serial_txx9.c	serial_txx9: zap changelog from source code	2007-05-08 11:15:12 -07:00
sh-sci.c	sh: Preliminary support for the SH-X3 CPU.	2007-06-20 18:27:10 +09:00
sh-sci.h	sh: Preliminary support for the SH-X3 CPU.	2007-06-20 18:27:10 +09:00
sn_console.c	sn_console section mismatch warning	2007-07-16 09:05:53 -07:00
suncore.c	[SPARC]: Linux always started with 9600 8N1	2007-05-29 02:50:07 -07:00
suncore.h	…
sunhv.c	[SERIAL] SUNHV: Fix jerky console on LDOM guests.	2007-07-16 17:12:00 -07:00
sunsab.c	[SERIAL]: Fix console write locking in sparc drivers.	2007-07-16 04:05:28 -07:00
sunsab.h	…
sunsu.c	[SERIAL]: Fix console write locking in sparc drivers.	2007-07-16 04:05:28 -07:00
sunzilog.c	[SERIAL]: Fix console write locking in sparc drivers.	2007-07-16 04:05:28 -07:00
sunzilog.h	[SERIAL] sunzilog: Interrupt enable before ISR handler installed	2007-05-09 13:49:04 -07:00
uartlite.c	[PATCH] drivers/serial NULL noise removal	2007-02-09 09:14:06 -08:00
v850e_uart.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
vr41xx_siu.c	[MIPS] separate platform_device registration for VR41xx serial interface	2007-07-12 17:41:13 +01:00