![Russell King](/assets/img/avatar_default.png)
Use platform_device_register_full() for those drivers which can, to avoid messing directly with DMA masks. This can only be done when the driver does not need to access the allocated musb platform device from within its callbacks, which may be called during the musb device probing. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Felipe Balbi <balbi@ti.com>
584 lines
16 KiB
C
584 lines
16 KiB
C
/*
|
|
* Texas Instruments DA8xx/OMAP-L1x "glue layer"
|
|
*
|
|
* Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* Based on the DaVinci "glue layer" code.
|
|
* Copyright (C) 2005-2006 by Texas Instruments
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* The Inventra Controller Driver for Linux is free software; you
|
|
* can redistribute it and/or modify it under the terms of the GNU
|
|
* General Public License version 2 as published by the Free Software
|
|
* Foundation.
|
|
*
|
|
* The Inventra Controller Driver for Linux is distributed in
|
|
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
* without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
* License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with The Inventra Controller Driver for Linux ; if not,
|
|
* write to the Free Software Foundation, Inc., 59 Temple Place,
|
|
* Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/usb/usb_phy_gen_xceiv.h>
|
|
|
|
#include <mach/da8xx.h>
|
|
#include <linux/platform_data/usb-davinci.h>
|
|
|
|
#include "musb_core.h"
|
|
|
|
/*
|
|
* DA8XX specific definitions
|
|
*/
|
|
|
|
/* USB 2.0 OTG module registers */
|
|
#define DA8XX_USB_REVISION_REG 0x00
|
|
#define DA8XX_USB_CTRL_REG 0x04
|
|
#define DA8XX_USB_STAT_REG 0x08
|
|
#define DA8XX_USB_EMULATION_REG 0x0c
|
|
#define DA8XX_USB_MODE_REG 0x10 /* Transparent, CDC, [Generic] RNDIS */
|
|
#define DA8XX_USB_AUTOREQ_REG 0x14
|
|
#define DA8XX_USB_SRP_FIX_TIME_REG 0x18
|
|
#define DA8XX_USB_TEARDOWN_REG 0x1c
|
|
#define DA8XX_USB_INTR_SRC_REG 0x20
|
|
#define DA8XX_USB_INTR_SRC_SET_REG 0x24
|
|
#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
|
|
#define DA8XX_USB_INTR_MASK_REG 0x2c
|
|
#define DA8XX_USB_INTR_MASK_SET_REG 0x30
|
|
#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34
|
|
#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38
|
|
#define DA8XX_USB_END_OF_INTR_REG 0x3c
|
|
#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
|
|
|
|
/* Control register bits */
|
|
#define DA8XX_SOFT_RESET_MASK 1
|
|
|
|
#define DA8XX_USB_TX_EP_MASK 0x1f /* EP0 + 4 Tx EPs */
|
|
#define DA8XX_USB_RX_EP_MASK 0x1e /* 4 Rx EPs */
|
|
|
|
/* USB interrupt register bits */
|
|
#define DA8XX_INTR_USB_SHIFT 16
|
|
#define DA8XX_INTR_USB_MASK (0x1ff << DA8XX_INTR_USB_SHIFT) /* 8 Mentor */
|
|
/* interrupts and DRVVBUS interrupt */
|
|
#define DA8XX_INTR_DRVVBUS 0x100
|
|
#define DA8XX_INTR_RX_SHIFT 8
|
|
#define DA8XX_INTR_RX_MASK (DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)
|
|
#define DA8XX_INTR_TX_SHIFT 0
|
|
#define DA8XX_INTR_TX_MASK (DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)
|
|
|
|
#define DA8XX_MENTOR_CORE_OFFSET 0x400
|
|
|
|
#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
|
|
|
|
struct da8xx_glue {
|
|
struct device *dev;
|
|
struct platform_device *musb;
|
|
struct clk *clk;
|
|
};
|
|
|
|
/*
|
|
* REVISIT (PM): we should be able to keep the PHY in low power mode most
|
|
* of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
|
|
* and, when in host mode, autosuspending idle root ports... PHY_PLLON
|
|
* (overriding SUSPENDM?) then likely needs to stay off.
|
|
*/
|
|
|
|
static inline void phy_on(void)
|
|
{
|
|
u32 cfgchip2 = __raw_readl(CFGCHIP2);
|
|
|
|
/*
|
|
* Start the on-chip PHY and its PLL.
|
|
*/
|
|
cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN);
|
|
cfgchip2 |= CFGCHIP2_PHY_PLLON;
|
|
__raw_writel(cfgchip2, CFGCHIP2);
|
|
|
|
pr_info("Waiting for USB PHY clock good...\n");
|
|
while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
|
|
cpu_relax();
|
|
}
|
|
|
|
static inline void phy_off(void)
|
|
{
|
|
u32 cfgchip2 = __raw_readl(CFGCHIP2);
|
|
|
|
/*
|
|
* Ensure that USB 1.1 reference clock is not being sourced from
|
|
* USB 2.0 PHY. Otherwise do not power down the PHY.
|
|
*/
|
|
if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) &&
|
|
(cfgchip2 & CFGCHIP2_USB1SUSPENDM)) {
|
|
pr_warning("USB 1.1 clocked from USB 2.0 PHY -- "
|
|
"can't power it down\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Power down the on-chip PHY.
|
|
*/
|
|
cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
|
|
__raw_writel(cfgchip2, CFGCHIP2);
|
|
}
|
|
|
|
/*
|
|
* Because we don't set CTRL.UINT, it's "important" to:
|
|
* - not read/write INTRUSB/INTRUSBE (except during
|
|
* initial setup, as a workaround);
|
|
* - use INTSET/INTCLR instead.
|
|
*/
|
|
|
|
/**
|
|
* da8xx_musb_enable - enable interrupts
|
|
*/
|
|
static void da8xx_musb_enable(struct musb *musb)
|
|
{
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
u32 mask;
|
|
|
|
/* Workaround: setup IRQs through both register sets. */
|
|
mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
|
|
((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
|
|
DA8XX_INTR_USB_MASK;
|
|
musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);
|
|
|
|
/* Force the DRVVBUS IRQ so we can start polling for ID change. */
|
|
musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
|
|
DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* da8xx_musb_disable - disable HDRC and flush interrupts
|
|
*/
|
|
static void da8xx_musb_disable(struct musb *musb)
|
|
{
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
|
|
musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
|
|
DA8XX_INTR_USB_MASK |
|
|
DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
|
|
musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
|
|
}
|
|
|
|
#define portstate(stmt) stmt
|
|
|
|
static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
|
|
{
|
|
WARN_ON(is_on && is_peripheral_active(musb));
|
|
}
|
|
|
|
#define POLL_SECONDS 2
|
|
|
|
static struct timer_list otg_workaround;
|
|
|
|
static void otg_timer(unsigned long _musb)
|
|
{
|
|
struct musb *musb = (void *)_musb;
|
|
void __iomem *mregs = musb->mregs;
|
|
u8 devctl;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* We poll because DaVinci's won't expose several OTG-critical
|
|
* status change events (from the transceiver) otherwise.
|
|
*/
|
|
devctl = musb_readb(mregs, MUSB_DEVCTL);
|
|
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
|
|
usb_otg_state_string(musb->xceiv->state));
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
switch (musb->xceiv->state) {
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
MUSB_DEV_MODE(musb);
|
|
} else {
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
break;
|
|
case OTG_STATE_A_WAIT_VFALL:
|
|
/*
|
|
* Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
|
|
* RTL seems to mis-handle session "start" otherwise (or in
|
|
* our case "recover"), in routine "VBUS was valid by the time
|
|
* VBUSERR got reported during enumeration" cases.
|
|
*/
|
|
if (devctl & MUSB_DEVCTL_VBUS) {
|
|
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
|
break;
|
|
}
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
|
|
MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
|
|
break;
|
|
case OTG_STATE_B_IDLE:
|
|
/*
|
|
* There's no ID-changed IRQ, so we have no good way to tell
|
|
* when to switch to the A-Default state machine (by setting
|
|
* the DEVCTL.Session bit).
|
|
*
|
|
* Workaround: whenever we're in B_IDLE, try setting the
|
|
* session flag every few seconds. If it works, ID was
|
|
* grounded and we're now in the A-Default state machine.
|
|
*
|
|
* NOTE: setting the session flag is _supposed_ to trigger
|
|
* SRP but clearly it doesn't.
|
|
*/
|
|
musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
|
|
devctl = musb_readb(mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE)
|
|
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
|
else
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
}
|
|
|
|
static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
|
|
{
|
|
static unsigned long last_timer;
|
|
|
|
if (timeout == 0)
|
|
timeout = jiffies + msecs_to_jiffies(3);
|
|
|
|
/* Never idle if active, or when VBUS timeout is not set as host */
|
|
if (musb->is_active || (musb->a_wait_bcon == 0 &&
|
|
musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
|
|
dev_dbg(musb->controller, "%s active, deleting timer\n",
|
|
usb_otg_state_string(musb->xceiv->state));
|
|
del_timer(&otg_workaround);
|
|
last_timer = jiffies;
|
|
return;
|
|
}
|
|
|
|
if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
|
|
dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
|
|
return;
|
|
}
|
|
last_timer = timeout;
|
|
|
|
dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
|
|
usb_otg_state_string(musb->xceiv->state),
|
|
jiffies_to_msecs(timeout - jiffies));
|
|
mod_timer(&otg_workaround, timeout);
|
|
}
|
|
|
|
static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
|
|
{
|
|
struct musb *musb = hci;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
struct usb_otg *otg = musb->xceiv->otg;
|
|
unsigned long flags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 status;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
/*
|
|
* NOTE: DA8XX shadows the Mentor IRQs. Don't manage them through
|
|
* the Mentor registers (except for setup), use the TI ones and EOI.
|
|
*/
|
|
|
|
/* Acknowledge and handle non-CPPI interrupts */
|
|
status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
|
|
if (!status)
|
|
goto eoi;
|
|
|
|
musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
|
|
dev_dbg(musb->controller, "USB IRQ %08x\n", status);
|
|
|
|
musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
|
|
musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
|
|
musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;
|
|
|
|
/*
|
|
* DRVVBUS IRQs are the only proxy we have (a very poor one!) for
|
|
* DA8xx's missing ID change IRQ. We need an ID change IRQ to
|
|
* switch appropriately between halves of the OTG state machine.
|
|
* Managing DEVCTL.Session per Mentor docs requires that we know its
|
|
* value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
|
|
* Also, DRVVBUS pulses for SRP (but not at 5 V)...
|
|
*/
|
|
if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
|
|
int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
|
|
void __iomem *mregs = musb->mregs;
|
|
u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
|
|
int err;
|
|
|
|
err = musb->int_usb & MUSB_INTR_VBUSERROR;
|
|
if (err) {
|
|
/*
|
|
* The Mentor core doesn't debounce VBUS as needed
|
|
* to cope with device connect current spikes. This
|
|
* means it's not uncommon for bus-powered devices
|
|
* to get VBUS errors during enumeration.
|
|
*
|
|
* This is a workaround, but newer RTL from Mentor
|
|
* seems to allow a better one: "re"-starting sessions
|
|
* without waiting for VBUS to stop registering in
|
|
* devctl.
|
|
*/
|
|
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
|
|
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
|
WARNING("VBUS error workaround (delay coming)\n");
|
|
} else if (drvvbus) {
|
|
MUSB_HST_MODE(musb);
|
|
otg->default_a = 1;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
|
|
del_timer(&otg_workaround);
|
|
} else {
|
|
musb->is_active = 0;
|
|
MUSB_DEV_MODE(musb);
|
|
otg->default_a = 0;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
|
|
}
|
|
|
|
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
|
|
drvvbus ? "on" : "off",
|
|
usb_otg_state_string(musb->xceiv->state),
|
|
err ? " ERROR" : "",
|
|
devctl);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (musb->int_tx || musb->int_rx || musb->int_usb)
|
|
ret |= musb_interrupt(musb);
|
|
|
|
eoi:
|
|
/* EOI needs to be written for the IRQ to be re-asserted. */
|
|
if (ret == IRQ_HANDLED || status)
|
|
musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
|
|
|
|
/* Poll for ID change */
|
|
if (musb->xceiv->state == OTG_STATE_B_IDLE)
|
|
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
|
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
|
|
{
|
|
u32 cfgchip2 = __raw_readl(CFGCHIP2);
|
|
|
|
cfgchip2 &= ~CFGCHIP2_OTGMODE;
|
|
switch (musb_mode) {
|
|
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
|
|
cfgchip2 |= CFGCHIP2_FORCE_HOST;
|
|
break;
|
|
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
|
|
cfgchip2 |= CFGCHIP2_FORCE_DEVICE;
|
|
break;
|
|
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
|
|
cfgchip2 |= CFGCHIP2_NO_OVERRIDE;
|
|
break;
|
|
default:
|
|
dev_dbg(musb->controller, "Trying to set unsupported mode %u\n", musb_mode);
|
|
}
|
|
|
|
__raw_writel(cfgchip2, CFGCHIP2);
|
|
return 0;
|
|
}
|
|
|
|
static int da8xx_musb_init(struct musb *musb)
|
|
{
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
u32 rev;
|
|
int ret = -ENODEV;
|
|
|
|
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
|
|
|
|
/* Returns zero if e.g. not clocked */
|
|
rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
|
|
if (!rev)
|
|
goto fail;
|
|
|
|
usb_nop_xceiv_register();
|
|
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
|
|
if (IS_ERR_OR_NULL(musb->xceiv)) {
|
|
ret = -EPROBE_DEFER;
|
|
goto fail;
|
|
}
|
|
|
|
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
|
|
|
|
/* Reset the controller */
|
|
musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
|
|
|
|
/* Start the on-chip PHY and its PLL. */
|
|
phy_on();
|
|
|
|
msleep(5);
|
|
|
|
/* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
|
|
pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n",
|
|
rev, __raw_readl(CFGCHIP2),
|
|
musb_readb(reg_base, DA8XX_USB_CTRL_REG));
|
|
|
|
musb->isr = da8xx_musb_interrupt;
|
|
return 0;
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int da8xx_musb_exit(struct musb *musb)
|
|
{
|
|
del_timer_sync(&otg_workaround);
|
|
|
|
phy_off();
|
|
|
|
usb_put_phy(musb->xceiv);
|
|
usb_nop_xceiv_unregister();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct musb_platform_ops da8xx_ops = {
|
|
.init = da8xx_musb_init,
|
|
.exit = da8xx_musb_exit,
|
|
|
|
.enable = da8xx_musb_enable,
|
|
.disable = da8xx_musb_disable,
|
|
|
|
.set_mode = da8xx_musb_set_mode,
|
|
.try_idle = da8xx_musb_try_idle,
|
|
|
|
.set_vbus = da8xx_musb_set_vbus,
|
|
};
|
|
|
|
static const struct platform_device_info da8xx_dev_info = {
|
|
.name = "musb-hdrc",
|
|
.id = PLATFORM_DEVID_AUTO,
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
static int da8xx_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource musb_resources[2];
|
|
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct platform_device *musb;
|
|
struct da8xx_glue *glue;
|
|
struct platform_device_info pinfo;
|
|
struct clk *clk;
|
|
|
|
int ret = -ENOMEM;
|
|
|
|
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
|
|
if (!glue) {
|
|
dev_err(&pdev->dev, "failed to allocate glue context\n");
|
|
goto err0;
|
|
}
|
|
|
|
clk = clk_get(&pdev->dev, "usb20");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "failed to get clock\n");
|
|
ret = PTR_ERR(clk);
|
|
goto err3;
|
|
}
|
|
|
|
ret = clk_enable(clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable clock\n");
|
|
goto err4;
|
|
}
|
|
|
|
glue->dev = &pdev->dev;
|
|
glue->clk = clk;
|
|
|
|
pdata->platform_ops = &da8xx_ops;
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
|
|
memset(musb_resources, 0x00, sizeof(*musb_resources) *
|
|
ARRAY_SIZE(musb_resources));
|
|
|
|
musb_resources[0].name = pdev->resource[0].name;
|
|
musb_resources[0].start = pdev->resource[0].start;
|
|
musb_resources[0].end = pdev->resource[0].end;
|
|
musb_resources[0].flags = pdev->resource[0].flags;
|
|
|
|
musb_resources[1].name = pdev->resource[1].name;
|
|
musb_resources[1].start = pdev->resource[1].start;
|
|
musb_resources[1].end = pdev->resource[1].end;
|
|
musb_resources[1].flags = pdev->resource[1].flags;
|
|
|
|
pinfo = da8xx_dev_info;
|
|
pinfo.parent = &pdev->dev;
|
|
pinfo.res = musb_resources;
|
|
pinfo.num_res = ARRAY_SIZE(musb_resources);
|
|
pinfo.data = pdata;
|
|
pinfo.size_data = sizeof(*pdata);
|
|
|
|
glue->musb = musb = platform_device_register_full(&pinfo);
|
|
if (IS_ERR(musb)) {
|
|
ret = PTR_ERR(musb);
|
|
dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
|
|
goto err5;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err5:
|
|
clk_disable(clk);
|
|
|
|
err4:
|
|
clk_put(clk);
|
|
|
|
err3:
|
|
kfree(glue);
|
|
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
static int da8xx_remove(struct platform_device *pdev)
|
|
{
|
|
struct da8xx_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
platform_device_unregister(glue->musb);
|
|
clk_disable(glue->clk);
|
|
clk_put(glue->clk);
|
|
kfree(glue);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver da8xx_driver = {
|
|
.probe = da8xx_probe,
|
|
.remove = da8xx_remove,
|
|
.driver = {
|
|
.name = "musb-da8xx",
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
|
|
MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
module_platform_driver(da8xx_driver);
|