alistair23-linux/drivers/clk/ti
Linus Torvalds 854e80bcfd ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes
 for existing machines for all the usual platforms: qcom, amlogic, at91,
 gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
 exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
 and versatile.
 
 The conversion of binding files to machine-readable yaml format
 continues, along with fixes found during the validation.
 Andre Przywara takes over maintainership for the old Calxeda Highbank
 platform and provides a number of updates.
 
 The OMAP2+ platforms see a continued move from platform data into
 dts files, for many devices that relied on a mix of auxiliary data
 in addition to the DT description
 
 A moderate number of new SoCs and machines are added, here is a full
 list:
 
 - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
   (SM8250) is the current high-end phone chip, and IPQ6018 is a new
   WiFi-6 router chip.
 
 - Mediatek MT8516 application processor SoC for voice assistants, along
   with the "pumpkin" development board
 
 - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
   evaluation board.
 
 - Kontron "sl28" board family based on NXP LS1028A
 
 - Eleven variations of the new i.MX6 TechNexion Pico board, combining
   the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
   SoM carriers
 
 - Three additional variants of the Toradex Colibri board family, all
   based on versions of the NXP i.MX7.
 
 - The Pinebook Pro laptop based on Rockchip RK3399
 
 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
   the ST-Ericsson u8500 platform
 
 - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
   STMicroelectronics stm32mp157
 
 - Renesas M3ULCB starter kit for R-Car M3-W+
 
 - Hoperun HiHope development board with Renesas RZ/G2M
 
 - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
 
 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
 
 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6HpMkACgkQmmx57+YA
 GNkGsQ/+KRbE74XGQvZww5PleaesqoZZhrt2gbi0pEJZ/JTgNa3dBkT+JwlToe/H
 x7nFVfMZeEl4O9GO0+/CH2tsmQa5BA8R9JddhFxwnZ48ZYLQAdaukwt94LM2zj3K
 GFgs47N4DAAF5QJoXNtmmQCXUWbj7A/0S5TTpXe94TYPN9XiJCdsyNNLpW3undTe
 K1HLnd4yWGforQc/VfRsV/Gsqi1VNHgL34M3belahiG7x0lytJDCHfhsfmIdxdGR
 n3LVRRJr6NhKcuUw3XtA8MxT4dTAcgHjbbDLkS/b1nHfuXMi0/zW8VPBzD/xyHL7
 fbFl8ayUMANB6FD/U7ptUC/0IMXuHDUn4B60CEEzK8ddkEbErrmXlYVGogpFHxvm
 MqrW8CnO0YEr0YMNAIyZoqHYGq8+8DCq+SRH48brdPzuiKI6OahdV1o07ulGhOjq
 ihwoZNE+J0NjeaX7C1xBX3DT1XqdcNPCmu3gx6r06u2FVXVm1J19YkIzQnEXQvKy
 NRIw5LIOfEsxkMSQ0oUuAUUUY1Fq1zuHqD8MmgBd3jqIULQqgfahmPL6Dtwm5QFf
 R17YsMcQ7ae1Pp7a+D3Jrkbn+s2y8wmJZIqH3eWebps9RvpWmrxzsRfOJ2czhqM1
 NY7Z/TGMM7lGM75DZ+xskfk7UCAX+hqMSTiNg9xbRo8946GAbV4=
 =ye2F
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...
2020-04-03 15:22:05 -07:00
..
adpll.c clk/ti/adpll: allocate room for terminating null 2019-11-08 09:00:37 -08:00
apll.c clk: ti: Don't reference clk_init_data after registration 2019-08-16 10:22:46 -07:00
autoidle.c clk: ti: check clock type before doing autoidle ops 2019-02-15 16:47:55 +02:00
clk-2xxx.c Merge branch 'cleanup-clk-h-includes' into clk-next 2015-07-28 11:59:09 -07:00
clk-3xxx.c clk: ti: omap3: cleanup unnecessary clock aliases 2017-12-01 15:17:17 +02:00
clk-7xx-compat.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clk-7xx.c clk: ti: add clkctrl data dra7 sgx 2020-01-20 09:43:44 +02:00
clk-33xx-compat.c clk: ti: am33xx: rename existing clkctrl data as compat data 2018-10-03 15:02:26 +03:00
clk-33xx.c clk: ti: am33xx: drop idlest polling from gfx clock 2019-10-31 15:18:29 +02:00
clk-43xx-compat.c clk: ti: am43xx: rename existing clkctrl data as compat data 2018-10-03 15:02:26 +03:00
clk-43xx.c clk: ti: am43xx: Fix clock parent for RTC clock 2020-03-16 11:28:05 -07:00
clk-44xx.c ARM: dts: Add missing omap4 secure clocks 2020-01-23 08:20:17 -08:00
clk-54xx.c ARM: dts: Add missing omap5 secure clocks 2020-01-23 08:22:57 -08:00
clk-814x.c clk: ti: Fix dm814x clkctrl for ethernet 2020-03-17 09:45:24 -07:00
clk-816x.c clk: ti: dm816: add clkctrl clock data 2017-12-01 15:18:06 +02:00
clk-dra7-atl.c clk: ti: dra7-atl: Remove pm_runtime_irq_safe() 2020-01-05 19:04:19 -08:00
clk.c clk: ti: clkctrl: Fix hidden dependency to node name 2020-01-20 12:29:27 +02:00
clkctrl.c clk: ti: clkctrl: Fix hidden dependency to node name 2020-01-20 12:29:27 +02:00
clkt_dflt.c clk: ti: convert to use proper register definition for all accesses 2017-03-08 13:06:15 +02:00
clkt_dpll.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clkt_iclk.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clock.h clk: let init callback return an error code 2019-12-23 18:53:13 -08:00
clockdomain.c clk: let init callback return an error code 2019-12-23 18:53:13 -08:00
composite.c clk: Convert to using %pOFn instead of device_node.name 2018-08-30 09:50:20 -07:00
divider.c clk: ti: divider: convert to use min,max,mask instead of width 2019-10-31 15:32:36 +02:00
dpll.c Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next 2019-09-19 15:31:41 -07:00
dpll3xxx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
dpll44xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
fapll.c clk: Remove io.h from clk-provider.h 2019-05-15 13:21:37 -07:00
fixed-factor.c clk: Convert to using %pOFn instead of device_node.name 2018-08-30 09:50:20 -07:00
gate.c clk: ti: Remove unused functions 2019-06-07 11:54:48 -07:00
interface.c clk: ti: generalize the init sequence of clk_hw_omap clocks 2019-02-15 16:46:22 +02:00
Kconfig treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Makefile clk: ti: dra7xx: rename existing clkctrl data as compat data 2018-10-03 15:02:27 +03:00
mux.c clk: ti: Remove unused functions 2019-06-07 11:54:48 -07:00