alistair23-linux/drivers/gpu/drm/i915
Daniel Vetter ef9c3aee60 drm/i915: add direct encoder disable/enable infrastructure
Just prep work, not yet put to some use.

Note that because we're still using the crtc helper to switch modes
(and their complicated way to do partial modesets), we need to call
the encoder's disable function unconditionally.

But once this is cleaned up we shouldn't call the encoder's disable
function unconditionally any more, because then we know that we'll
only call it if the encoder is actually enabled. Also note that we
then need to be careful about which crtc we're filtering the encoder
list on: We want to filter on the crtc of the _current_ mode, not the
one we're about to set up.

For the enabling side we need to do the same trick. And again, we
should be able to simplify this quite a bit when things have settled
into place.

Also note that this simply does not take cloning into account, so dpms
needs to be handled specially for the few outputs where we even bother
with it.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:53:16 +02:00
..
dvo.h drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
dvo_ch7xxx.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
dvo_ch7017.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
dvo_ivch.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
dvo_ns2501.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
dvo_sil164.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
dvo_tfp410.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
i915_debugfs.c drm/i915: don't grab dev->struct_mutex for userspace forcewak 2012-08-12 11:28:49 +02:00
i915_dma.c drm/i915: implement dma buf begin_cpu_access (v2) 2012-08-17 10:10:06 +02:00
i915_drv.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
i915_drv.h drm/i915: add crtc->enable/disable vfuncs insted of dpms 2012-09-06 07:52:00 +02:00
i915_gem.c drm/i915: Lazily apply the SNB+ seqno w/a 2012-08-10 11:11:32 +02:00
i915_gem_context.c drm/i915: remove unused variable 2012-08-05 22:39:53 +02:00
i915_gem_debug.c drm/i915: stop using dev->agp->base 2012-06-12 22:18:06 +02:00
i915_gem_dmabuf.c drm/i915: implement dma buf begin_cpu_access (v2) 2012-08-17 10:10:06 +02:00
i915_gem_evict.c drm/i915: Segregate memory domains in the GTT using coloring 2012-07-26 12:56:25 +02:00
i915_gem_execbuffer.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
i915_gem_gtt.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
i915_gem_stolen.c drm/i915: Split the stolen handling for GEM out of i915_dma.c 2012-05-03 11:18:11 +02:00
i915_gem_tiling.c drm/i915: Only the zap the VMA after updating the tiling parameters 2012-05-03 11:18:07 +02:00
i915_ioc32.c drm/i915: [sparse] trivial sparse fixes 2012-04-18 10:34:49 +02:00
i915_irq.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
i915_reg.h drm/i915: ironlake_write_eld code cleanup 2012-08-17 10:10:04 +02:00
i915_suspend.c Linux 3.5-rc7 2012-07-20 00:53:28 -04:00
i915_sysfs.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
i915_trace.h drm/i915: improve i915_wait_request_begin trace 2012-05-25 09:55:15 +02:00
i915_trace_points.c drm/i915: [sparse] trivial sparse fixes 2012-04-18 10:34:49 +02:00
intel_acpi.c drm/i915: [sparse] trivial sparse fixes 2012-04-18 10:34:49 +02:00
intel_bios.c drm/i915/bios: cleanup return type of intel_parse_bios() 2012-06-27 10:17:51 +01:00
intel_bios.h drm/i915/bios: cleanup return type of intel_parse_bios() 2012-06-27 10:17:51 +01:00
intel_crt.c drm/i915: Allow VGA on CRTC 2 2012-08-17 10:10:06 +02:00
intel_ddi.c drm/i915: write eld info for HDMI audio 2012-08-17 10:10:04 +02:00
intel_display.c drm/i915: add direct encoder disable/enable infrastructure 2012-09-06 07:53:16 +02:00
intel_dp.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
intel_drv.h drm/i915: add direct encoder disable/enable infrastructure 2012-09-06 07:53:16 +02:00
intel_dvo.c drm/i915: simplify dvo dpms interface 2012-08-17 10:10:02 +02:00
intel_fb.c drm/i915: Zero initialize mode_cmd 2012-07-05 13:27:58 +02:00
intel_hdmi.c drm/i915: add port parameter to intel_hdmi_init 2012-07-25 18:23:47 +02:00
intel_i2c.c drm/i915: ensure i2c adapter is all set before adding it 2012-08-13 19:04:24 +02:00
intel_lvds.c drm/i915: simplify possible_clones computation 2012-07-25 18:23:46 +02:00
intel_modes.c drm/i915: kill intel_ddc_probe 2012-07-20 12:21:39 +02:00
intel_opregion.c drm/i915: [sparse] __iomem fixes for opregion 2012-05-03 11:18:00 +02:00
intel_overlay.c drm/i915: rip out the overlay pipe A workaround 2012-08-17 10:10:01 +02:00
intel_panel.c drm/i915: Fix blank panel at reopening lid 2012-08-11 21:15:16 +02:00
intel_pm.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
intel_ringbuffer.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
intel_ringbuffer.h drm/i915: Lazily apply the SNB+ seqno w/a 2012-08-10 11:11:32 +02:00
intel_sdvo.c Linux 3.6-rc2 2012-08-17 09:01:08 +02:00
intel_sdvo_regs.h drm/i915: properly handle interlaced bit for sdvo dtd conversion 2012-05-24 17:53:52 +02:00
intel_sprite.c drm/i915: mask tiled bit when updating ILK sprites 2012-07-20 12:21:40 +02:00
intel_tv.c drm/i915: drop intel_encoder argument to load_detect_pipe functions 2012-08-17 10:10:02 +02:00
Makefile drm/i915: Support for ns2501-DVO 2012-07-25 18:23:48 +02:00