1
0
Fork 0
remarkable-linux/net/wireless/nl80211.c

15319 lines
404 KiB
C
Raw Permalink Normal View History

/*
* This is the new netlink-based wireless configuration interface.
*
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2015-2017 Intel Deutschland GmbH
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
#include <linux/netlink.h>
#include <linux/nospec.h>
#include <linux/etherdevice.h>
#include <net/net_namespace.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include <net/sock.h>
#include <net/inet_connection_sock.h>
#include "core.h"
#include "nl80211.h"
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
#include "reg.h"
#include "rdev-ops.h"
static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
struct genl_info *info,
struct cfg80211_crypto_settings *settings,
int cipher_limit);
/* the netlink family */
static struct genl_family nl80211_fam;
/* multicast groups */
enum nl80211_multicast_groups {
NL80211_MCGRP_CONFIG,
NL80211_MCGRP_SCAN,
NL80211_MCGRP_REGULATORY,
NL80211_MCGRP_MLME,
NL80211_MCGRP_VENDOR,
NL80211_MCGRP_NAN,
NL80211_MCGRP_TESTMODE /* keep last - ifdef! */
};
static const struct genl_multicast_group nl80211_mcgrps[] = {
[NL80211_MCGRP_CONFIG] = { .name = NL80211_MULTICAST_GROUP_CONFIG },
[NL80211_MCGRP_SCAN] = { .name = NL80211_MULTICAST_GROUP_SCAN },
[NL80211_MCGRP_REGULATORY] = { .name = NL80211_MULTICAST_GROUP_REG },
[NL80211_MCGRP_MLME] = { .name = NL80211_MULTICAST_GROUP_MLME },
[NL80211_MCGRP_VENDOR] = { .name = NL80211_MULTICAST_GROUP_VENDOR },
[NL80211_MCGRP_NAN] = { .name = NL80211_MULTICAST_GROUP_NAN },
#ifdef CONFIG_NL80211_TESTMODE
[NL80211_MCGRP_TESTMODE] = { .name = NL80211_MULTICAST_GROUP_TESTMODE }
#endif
};
/* returns ERR_PTR values */
static struct wireless_dev *
__cfg80211_wdev_from_attrs(struct net *netns, struct nlattr **attrs)
{
struct cfg80211_registered_device *rdev;
struct wireless_dev *result = NULL;
bool have_ifidx = attrs[NL80211_ATTR_IFINDEX];
bool have_wdev_id = attrs[NL80211_ATTR_WDEV];
u64 wdev_id;
int wiphy_idx = -1;
int ifidx = -1;
ASSERT_RTNL();
if (!have_ifidx && !have_wdev_id)
return ERR_PTR(-EINVAL);
if (have_ifidx)
ifidx = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
if (have_wdev_id) {
wdev_id = nla_get_u64(attrs[NL80211_ATTR_WDEV]);
wiphy_idx = wdev_id >> 32;
}
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
struct wireless_dev *wdev;
if (wiphy_net(&rdev->wiphy) != netns)
continue;
if (have_wdev_id && rdev->wiphy_idx != wiphy_idx)
continue;
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (have_ifidx && wdev->netdev &&
wdev->netdev->ifindex == ifidx) {
result = wdev;
break;
}
if (have_wdev_id && wdev->identifier == (u32)wdev_id) {
result = wdev;
break;
}
}
if (result)
break;
}
if (result)
return result;
return ERR_PTR(-ENODEV);
}
static struct cfg80211_registered_device *
__cfg80211_rdev_from_attrs(struct net *netns, struct nlattr **attrs)
{
struct cfg80211_registered_device *rdev = NULL, *tmp;
struct net_device *netdev;
ASSERT_RTNL();
if (!attrs[NL80211_ATTR_WIPHY] &&
!attrs[NL80211_ATTR_IFINDEX] &&
!attrs[NL80211_ATTR_WDEV])
return ERR_PTR(-EINVAL);
if (attrs[NL80211_ATTR_WIPHY])
rdev = cfg80211_rdev_by_wiphy_idx(
nla_get_u32(attrs[NL80211_ATTR_WIPHY]));
if (attrs[NL80211_ATTR_WDEV]) {
u64 wdev_id = nla_get_u64(attrs[NL80211_ATTR_WDEV]);
struct wireless_dev *wdev;
bool found = false;
tmp = cfg80211_rdev_by_wiphy_idx(wdev_id >> 32);
if (tmp) {
/* make sure wdev exists */
list_for_each_entry(wdev, &tmp->wiphy.wdev_list, list) {
if (wdev->identifier != (u32)wdev_id)
continue;
found = true;
break;
}
if (!found)
tmp = NULL;
if (rdev && tmp != rdev)
return ERR_PTR(-EINVAL);
rdev = tmp;
}
}
if (attrs[NL80211_ATTR_IFINDEX]) {
int ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
netdev = __dev_get_by_index(netns, ifindex);
if (netdev) {
if (netdev->ieee80211_ptr)
tmp = wiphy_to_rdev(
netdev->ieee80211_ptr->wiphy);
else
tmp = NULL;
/* not wireless device -- return error */
if (!tmp)
return ERR_PTR(-EINVAL);
/* mismatch -- return error */
if (rdev && tmp != rdev)
return ERR_PTR(-EINVAL);
rdev = tmp;
}
}
if (!rdev)
return ERR_PTR(-ENODEV);
if (netns != wiphy_net(&rdev->wiphy))
return ERR_PTR(-ENODEV);
return rdev;
}
/*
* This function returns a pointer to the driver
* that the genl_info item that is passed refers to.
*
* The result of this can be a PTR_ERR and hence must
* be checked with IS_ERR() for errors.
*/
static struct cfg80211_registered_device *
cfg80211_get_dev_from_info(struct net *netns, struct genl_info *info)
{
return __cfg80211_rdev_from_attrs(netns, info->attrs);
}
/* policy for the attributes */
static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
.len = 20-1 },
[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_CHANNEL_WIDTH] = { .type = NLA_U32 },
[NL80211_ATTR_CENTER_FREQ1] = { .type = NLA_U32 },
[NL80211_ATTR_CENTER_FREQ2] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RETRY_SHORT] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_RETRY_LONG] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_FRAG_THRESHOLD] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RTS_THRESHOLD] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_COVERAGE_CLASS] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_DYN_ACK] = { .type = NLA_FLAG },
[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
[NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 },
[NL80211_ATTR_MAC] = { .len = ETH_ALEN },
[NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN },
[NL80211_ATTR_KEY] = { .type = NLA_NESTED, },
[NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY,
.len = WLAN_MAX_KEY_LEN },
[NL80211_ATTR_KEY_IDX] = { .type = NLA_U8 },
[NL80211_ATTR_KEY_CIPHER] = { .type = NLA_U32 },
[NL80211_ATTR_KEY_DEFAULT] = { .type = NLA_FLAG },
[NL80211_ATTR_KEY_SEQ] = { .type = NLA_BINARY, .len = 16 },
[NL80211_ATTR_KEY_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_BEACON_INTERVAL] = { .type = NLA_U32 },
[NL80211_ATTR_DTIM_PERIOD] = { .type = NLA_U32 },
[NL80211_ATTR_BEACON_HEAD] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_BEACON_TAIL] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_STA_AID] = { .type = NLA_U16 },
[NL80211_ATTR_STA_FLAGS] = { .type = NLA_NESTED },
[NL80211_ATTR_STA_LISTEN_INTERVAL] = { .type = NLA_U16 },
[NL80211_ATTR_STA_SUPPORTED_RATES] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_RATES },
[NL80211_ATTR_STA_PLINK_ACTION] = { .type = NLA_U8 },
[NL80211_ATTR_STA_VLAN] = { .type = NLA_U32 },
[NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ },
[NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_MESH_ID_LEN },
[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
[NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 },
[NL80211_ATTR_REG_RULES] = { .type = NLA_NESTED },
[NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_BASIC_RATES] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_RATES },
[NL80211_ATTR_BSS_HT_OPMODE] = { .type = NLA_U16 },
[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
[NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
[NL80211_ATTR_IE] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_SCAN_FREQUENCIES] = { .type = NLA_NESTED },
[NL80211_ATTR_SCAN_SSIDS] = { .type = NLA_NESTED },
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
[NL80211_ATTR_SSID] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_SSID_LEN },
[NL80211_ATTR_AUTH_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_REASON_CODE] = { .type = NLA_U16 },
[NL80211_ATTR_FREQ_FIXED] = { .type = NLA_FLAG },
[NL80211_ATTR_TIMED_OUT] = { .type = NLA_FLAG },
[NL80211_ATTR_USE_MFP] = { .type = NLA_U32 },
[NL80211_ATTR_STA_FLAGS2] = {
.len = sizeof(struct nl80211_sta_flag_update),
},
[NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG },
[NL80211_ATTR_CONTROL_PORT_ETHERTYPE] = { .type = NLA_U16 },
[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT] = { .type = NLA_FLAG },
[NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG },
[NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
[NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
[NL80211_ATTR_PID] = { .type = NLA_U32 },
[NL80211_ATTR_4ADDR] = { .type = NLA_U8 },
[NL80211_ATTR_PMKID] = { .len = WLAN_PMKID_LEN },
[NL80211_ATTR_DURATION] = { .type = NLA_U32 },
[NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
[NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
[NL80211_ATTR_FRAME] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_FRAME_MATCH] = { .type = NLA_BINARY, },
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
[NL80211_ATTR_PS_STATE] = { .type = NLA_U32 },
[NL80211_ATTR_CQM] = { .type = NLA_NESTED, },
[NL80211_ATTR_LOCAL_STATE_CHANGE] = { .type = NLA_FLAG },
[NL80211_ATTR_AP_ISOLATE] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_TX_POWER_SETTING] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_TX_POWER_LEVEL] = { .type = NLA_U32 },
[NL80211_ATTR_FRAME_TYPE] = { .type = NLA_U16 },
cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09 20:50:50 -07:00
[NL80211_ATTR_WIPHY_ANTENNA_TX] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_ANTENNA_RX] = { .type = NLA_U32 },
[NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 },
[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
[NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
[NL80211_ATTR_STA_PLINK_STATE] = { .type = NLA_U8 },
[NL80211_ATTR_SCHED_SCAN_INTERVAL] = { .type = NLA_U32 },
[NL80211_ATTR_REKEY_DATA] = { .type = NLA_NESTED },
[NL80211_ATTR_SCAN_SUPP_RATES] = { .type = NLA_NESTED },
[NL80211_ATTR_HIDDEN_SSID] = { .type = NLA_U32 },
[NL80211_ATTR_IE_PROBE_RESP] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_IE_ASSOC_RESP] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_ROAM_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_SCHED_SCAN_MATCH] = { .type = NLA_NESTED },
[NL80211_ATTR_TX_NO_CCK_RATE] = { .type = NLA_FLAG },
[NL80211_ATTR_TDLS_ACTION] = { .type = NLA_U8 },
[NL80211_ATTR_TDLS_DIALOG_TOKEN] = { .type = NLA_U8 },
[NL80211_ATTR_TDLS_OPERATION] = { .type = NLA_U8 },
[NL80211_ATTR_TDLS_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_TDLS_EXTERNAL_SETUP] = { .type = NLA_FLAG },
[NL80211_ATTR_TDLS_INITIATOR] = { .type = NLA_FLAG },
[NL80211_ATTR_DONT_WAIT_FOR_ACK] = { .type = NLA_FLAG },
[NL80211_ATTR_PROBE_RESP] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_DFS_REGION] = { .type = NLA_U8 },
[NL80211_ATTR_DISABLE_HT] = { .type = NLA_FLAG },
[NL80211_ATTR_HT_CAPABILITY_MASK] = {
.len = NL80211_HT_CAPABILITY_LEN
},
[NL80211_ATTR_NOACK_MAP] = { .type = NLA_U16 },
[NL80211_ATTR_INACTIVITY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_ATTR_BG_SCAN_PERIOD] = { .type = NLA_U16 },
[NL80211_ATTR_WDEV] = { .type = NLA_U64 },
[NL80211_ATTR_USER_REG_HINT_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_AUTH_DATA] = { .type = NLA_BINARY, },
[NL80211_ATTR_VHT_CAPABILITY] = { .len = NL80211_VHT_CAPABILITY_LEN },
[NL80211_ATTR_SCAN_FLAGS] = { .type = NLA_U32 },
[NL80211_ATTR_P2P_CTWINDOW] = { .type = NLA_U8 },
[NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 },
[NL80211_ATTR_LOCAL_MESH_POWER_MODE] = {. type = NLA_U32 },
[NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 },
[NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED },
[NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 },
[NL80211_ATTR_STA_EXT_CAPABILITY] = { .type = NLA_BINARY, },
[NL80211_ATTR_SPLIT_WIPHY_DUMP] = { .type = NLA_FLAG, },
[NL80211_ATTR_DISABLE_VHT] = { .type = NLA_FLAG },
[NL80211_ATTR_VHT_CAPABILITY_MASK] = {
.len = NL80211_VHT_CAPABILITY_LEN,
},
[NL80211_ATTR_MDID] = { .type = NLA_U16 },
[NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_PEER_AID] = { .type = NLA_U16 },
[NL80211_ATTR_CH_SWITCH_COUNT] = { .type = NLA_U32 },
[NL80211_ATTR_CH_SWITCH_BLOCK_TX] = { .type = NLA_FLAG },
[NL80211_ATTR_CSA_IES] = { .type = NLA_NESTED },
[NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_BINARY },
[NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_BINARY },
[NL80211_ATTR_STA_SUPPORTED_CHANNELS] = { .type = NLA_BINARY },
[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES] = { .type = NLA_BINARY },
[NL80211_ATTR_HANDLE_DFS] = { .type = NLA_FLAG },
[NL80211_ATTR_OPMODE_NOTIF] = { .type = NLA_U8 },
[NL80211_ATTR_VENDOR_ID] = { .type = NLA_U32 },
[NL80211_ATTR_VENDOR_SUBCMD] = { .type = NLA_U32 },
[NL80211_ATTR_VENDOR_DATA] = { .type = NLA_BINARY },
[NL80211_ATTR_QOS_MAP] = { .type = NLA_BINARY,
.len = IEEE80211_QOS_MAP_LEN_MAX },
[NL80211_ATTR_MAC_HINT] = { .len = ETH_ALEN },
[NL80211_ATTR_WIPHY_FREQ_HINT] = { .type = NLA_U32 },
[NL80211_ATTR_TDLS_PEER_CAPABILITY] = { .type = NLA_U32 },
[NL80211_ATTR_SOCKET_OWNER] = { .type = NLA_FLAG },
[NL80211_ATTR_CSA_C_OFFSETS_TX] = { .type = NLA_BINARY },
[NL80211_ATTR_USE_RRM] = { .type = NLA_FLAG },
[NL80211_ATTR_TSID] = { .type = NLA_U8 },
[NL80211_ATTR_USER_PRIO] = { .type = NLA_U8 },
[NL80211_ATTR_ADMITTED_TIME] = { .type = NLA_U16 },
[NL80211_ATTR_SMPS_MODE] = { .type = NLA_U8 },
[NL80211_ATTR_MAC_MASK] = { .len = ETH_ALEN },
[NL80211_ATTR_WIPHY_SELF_MANAGED_REG] = { .type = NLA_FLAG },
[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 22:32:06 -07:00
[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
[NL80211_ATTR_PBSS] = { .type = NLA_FLAG },
[NL80211_ATTR_BSS_SELECT] = { .type = NLA_NESTED },
[NL80211_ATTR_STA_SUPPORT_P2P_PS] = { .type = NLA_U8 },
[NL80211_ATTR_MU_MIMO_GROUP_DATA] = {
.len = VHT_MUMIMO_GROUPS_DATA_LEN
},
[NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR] = { .len = ETH_ALEN },
[NL80211_ATTR_NAN_MASTER_PREF] = { .type = NLA_U8 },
[NL80211_ATTR_BANDS] = { .type = NLA_U32 },
[NL80211_ATTR_NAN_FUNC] = { .type = NLA_NESTED },
[NL80211_ATTR_FILS_KEK] = { .type = NLA_BINARY,
.len = FILS_MAX_KEK_LEN },
[NL80211_ATTR_FILS_NONCES] = { .len = 2 * FILS_NONCE_LEN },
[NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED] = { .type = NLA_FLAG, },
[NL80211_ATTR_BSSID] = { .len = ETH_ALEN },
[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI] = { .type = NLA_S8 },
[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST] = {
.len = sizeof(struct nl80211_bss_select_rssi_adjust)
},
[NL80211_ATTR_TIMEOUT_REASON] = { .type = NLA_U32 },
[NL80211_ATTR_FILS_ERP_USERNAME] = { .type = NLA_BINARY,
.len = FILS_ERP_MAX_USERNAME_LEN },
[NL80211_ATTR_FILS_ERP_REALM] = { .type = NLA_BINARY,
.len = FILS_ERP_MAX_REALM_LEN },
[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] = { .type = NLA_U16 },
[NL80211_ATTR_FILS_ERP_RRK] = { .type = NLA_BINARY,
.len = FILS_ERP_MAX_RRK_LEN },
[NL80211_ATTR_FILS_CACHE_ID] = { .len = 2 },
[NL80211_ATTR_PMK] = { .type = NLA_BINARY, .len = PMK_MAX_LEN },
[NL80211_ATTR_SCHED_SCAN_MULTI] = { .type = NLA_FLAG },
[NL80211_ATTR_SAE_PASSWORD] = { .type = NLA_BINARY,
.len = SAE_PASSWORD_MAX_LEN },
};
/* policy for the key attributes */
static const struct nla_policy nl80211_key_policy[NL80211_KEY_MAX + 1] = {
[NL80211_KEY_DATA] = { .type = NLA_BINARY, .len = WLAN_MAX_KEY_LEN },
[NL80211_KEY_IDX] = { .type = NLA_U8 },
[NL80211_KEY_CIPHER] = { .type = NLA_U32 },
[NL80211_KEY_SEQ] = { .type = NLA_BINARY, .len = 16 },
[NL80211_KEY_DEFAULT] = { .type = NLA_FLAG },
[NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG },
[NL80211_KEY_TYPE] = { .type = NLA_U32 },
[NL80211_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
};
/* policy for the key default flags */
static const struct nla_policy
nl80211_key_default_policy[NUM_NL80211_KEY_DEFAULT_TYPES] = {
[NL80211_KEY_DEFAULT_TYPE_UNICAST] = { .type = NLA_FLAG },
[NL80211_KEY_DEFAULT_TYPE_MULTICAST] = { .type = NLA_FLAG },
};
#ifdef CONFIG_PM
/* policy for WoWLAN attributes */
static const struct nla_policy
nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = {
[NL80211_WOWLAN_TRIG_ANY] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_DISCONNECT] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_MAGIC_PKT] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_PKT_PATTERN] = { .type = NLA_NESTED },
[NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_RFKILL_RELEASE] = { .type = NLA_FLAG },
[NL80211_WOWLAN_TRIG_TCP_CONNECTION] = { .type = NLA_NESTED },
[NL80211_WOWLAN_TRIG_NET_DETECT] = { .type = NLA_NESTED },
};
static const struct nla_policy
nl80211_wowlan_tcp_policy[NUM_NL80211_WOWLAN_TCP] = {
[NL80211_WOWLAN_TCP_SRC_IPV4] = { .type = NLA_U32 },
[NL80211_WOWLAN_TCP_DST_IPV4] = { .type = NLA_U32 },
[NL80211_WOWLAN_TCP_DST_MAC] = { .len = ETH_ALEN },
[NL80211_WOWLAN_TCP_SRC_PORT] = { .type = NLA_U16 },
[NL80211_WOWLAN_TCP_DST_PORT] = { .type = NLA_U16 },
[NL80211_WOWLAN_TCP_DATA_PAYLOAD] = { .len = 1 },
[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ] = {
.len = sizeof(struct nl80211_wowlan_tcp_data_seq)
},
[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN] = {
.len = sizeof(struct nl80211_wowlan_tcp_data_token)
},
[NL80211_WOWLAN_TCP_DATA_INTERVAL] = { .type = NLA_U32 },
[NL80211_WOWLAN_TCP_WAKE_PAYLOAD] = { .len = 1 },
[NL80211_WOWLAN_TCP_WAKE_MASK] = { .len = 1 },
};
#endif /* CONFIG_PM */
/* policy for coalesce rule attributes */
static const struct nla_policy
nl80211_coalesce_policy[NUM_NL80211_ATTR_COALESCE_RULE] = {
[NL80211_ATTR_COALESCE_RULE_DELAY] = { .type = NLA_U32 },
[NL80211_ATTR_COALESCE_RULE_CONDITION] = { .type = NLA_U32 },
[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN] = { .type = NLA_NESTED },
};
/* policy for GTK rekey offload attributes */
static const struct nla_policy
nl80211_rekey_policy[NUM_NL80211_REKEY_DATA] = {
[NL80211_REKEY_DATA_KEK] = { .len = NL80211_KEK_LEN },
[NL80211_REKEY_DATA_KCK] = { .len = NL80211_KCK_LEN },
[NL80211_REKEY_DATA_REPLAY_CTR] = { .len = NL80211_REPLAY_CTR_LEN },
};
static const struct nla_policy
nl80211_match_policy[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1] = {
[NL80211_SCHED_SCAN_MATCH_ATTR_SSID] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_SSID_LEN },
[NL80211_SCHED_SCAN_MATCH_ATTR_BSSID] = { .len = ETH_ALEN },
[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI] = { .type = NLA_U32 },
};
static const struct nla_policy
nl80211_plan_policy[NL80211_SCHED_SCAN_PLAN_MAX + 1] = {
[NL80211_SCHED_SCAN_PLAN_INTERVAL] = { .type = NLA_U32 },
[NL80211_SCHED_SCAN_PLAN_ITERATIONS] = { .type = NLA_U32 },
};
static const struct nla_policy
nl80211_bss_select_policy[NL80211_BSS_SELECT_ATTR_MAX + 1] = {
[NL80211_BSS_SELECT_ATTR_RSSI] = { .type = NLA_FLAG },
[NL80211_BSS_SELECT_ATTR_BAND_PREF] = { .type = NLA_U32 },
[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST] = {
.len = sizeof(struct nl80211_bss_select_rssi_adjust)
},
};
/* policy for NAN function attributes */
static const struct nla_policy
nl80211_nan_func_policy[NL80211_NAN_FUNC_ATTR_MAX + 1] = {
[NL80211_NAN_FUNC_TYPE] = { .type = NLA_U8 },
[NL80211_NAN_FUNC_SERVICE_ID] = {
.len = NL80211_NAN_FUNC_SERVICE_ID_LEN },
[NL80211_NAN_FUNC_PUBLISH_TYPE] = { .type = NLA_U8 },
[NL80211_NAN_FUNC_PUBLISH_BCAST] = { .type = NLA_FLAG },
[NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE] = { .type = NLA_FLAG },
[NL80211_NAN_FUNC_FOLLOW_UP_ID] = { .type = NLA_U8 },
[NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID] = { .type = NLA_U8 },
[NL80211_NAN_FUNC_FOLLOW_UP_DEST] = { .len = ETH_ALEN },
[NL80211_NAN_FUNC_CLOSE_RANGE] = { .type = NLA_FLAG },
[NL80211_NAN_FUNC_TTL] = { .type = NLA_U32 },
[NL80211_NAN_FUNC_SERVICE_INFO] = { .type = NLA_BINARY,
.len = NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN },
[NL80211_NAN_FUNC_SRF] = { .type = NLA_NESTED },
[NL80211_NAN_FUNC_RX_MATCH_FILTER] = { .type = NLA_NESTED },
[NL80211_NAN_FUNC_TX_MATCH_FILTER] = { .type = NLA_NESTED },
[NL80211_NAN_FUNC_INSTANCE_ID] = { .type = NLA_U8 },
[NL80211_NAN_FUNC_TERM_REASON] = { .type = NLA_U8 },
};
/* policy for Service Response Filter attributes */
static const struct nla_policy
nl80211_nan_srf_policy[NL80211_NAN_SRF_ATTR_MAX + 1] = {
[NL80211_NAN_SRF_INCLUDE] = { .type = NLA_FLAG },
[NL80211_NAN_SRF_BF] = { .type = NLA_BINARY,
.len = NL80211_NAN_FUNC_SRF_MAX_LEN },
[NL80211_NAN_SRF_BF_IDX] = { .type = NLA_U8 },
[NL80211_NAN_SRF_MAC_ADDRS] = { .type = NLA_NESTED },
};
/* policy for packet pattern attributes */
static const struct nla_policy
nl80211_packet_pattern_policy[MAX_NL80211_PKTPAT + 1] = {
[NL80211_PKTPAT_MASK] = { .type = NLA_BINARY, },
[NL80211_PKTPAT_PATTERN] = { .type = NLA_BINARY, },
[NL80211_PKTPAT_OFFSET] = { .type = NLA_U32 },
};
static int nl80211_prepare_wdev_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct cfg80211_registered_device **rdev,
struct wireless_dev **wdev)
{
int err;
if (!cb->args[0]) {
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
genl_family_attrbuf(&nl80211_fam),
nl80211_fam.maxattr, nl80211_policy, NULL);
if (err)
return err;
*wdev = __cfg80211_wdev_from_attrs(
sock_net(skb->sk),
genl_family_attrbuf(&nl80211_fam));
if (IS_ERR(*wdev))
return PTR_ERR(*wdev);
*rdev = wiphy_to_rdev((*wdev)->wiphy);
/* 0 is the first index - add 1 to parse only once */
cb->args[0] = (*rdev)->wiphy_idx + 1;
cb->args[1] = (*wdev)->identifier;
} else {
/* subtract the 1 again here */
struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0] - 1);
struct wireless_dev *tmp;
if (!wiphy)
return -ENODEV;
*rdev = wiphy_to_rdev(wiphy);
*wdev = NULL;
list_for_each_entry(tmp, &(*rdev)->wiphy.wdev_list, list) {
if (tmp->identifier == cb->args[1]) {
*wdev = tmp;
break;
}
}
if (!*wdev)
return -ENODEV;
}
return 0;
}
/* IE validation */
static bool is_valid_ie_attr(const struct nlattr *attr)
{
const u8 *pos;
int len;
if (!attr)
return true;
pos = nla_data(attr);
len = nla_len(attr);
while (len) {
u8 elemlen;
if (len < 2)
return false;
len -= 2;
elemlen = pos[1];
if (elemlen > len)
return false;
len -= elemlen;
pos += 2 + elemlen;
}
return true;
}
/* message building helper */
static inline void *nl80211hdr_put(struct sk_buff *skb, u32 portid, u32 seq,
int flags, u8 cmd)
{
/* since there is no private header just add the generic one */
return genlmsg_put(skb, portid, seq, &nl80211_fam, flags, cmd);
}
static int nl80211_msg_put_channel(struct sk_buff *msg,
struct ieee80211_channel *chan,
bool large)
{
/* Some channels must be completely excluded from the
* list to protect old user-space tools from breaking
*/
if (!large && chan->flags &
(IEEE80211_CHAN_NO_10MHZ | IEEE80211_CHAN_NO_20MHZ))
return 0;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_FREQ,
chan->center_freq))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_DISABLED) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_DISABLED))
goto nla_put_failure;
if (chan->flags & IEEE80211_CHAN_NO_IR) {
if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IR))
goto nla_put_failure;
if (nla_put_flag(msg, __NL80211_FREQUENCY_ATTR_NO_IBSS))
goto nla_put_failure;
}
if (chan->flags & IEEE80211_CHAN_RADAR) {
if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
if (large) {
u32 time;
time = elapsed_jiffies_msecs(chan->dfs_state_entered);
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_STATE,
chan->dfs_state))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME,
time))
goto nla_put_failure;
if (nla_put_u32(msg,
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
chan->dfs_cac_ms))
goto nla_put_failure;
}
}
if (large) {
if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_INDOOR_ONLY) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_INDOOR_ONLY))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_IR_CONCURRENT) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_IR_CONCURRENT))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_20MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_20MHZ))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_10MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_10MHZ))
goto nla_put_failure;
}
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
DBM_TO_MBM(chan->max_power)))
goto nla_put_failure;
return 0;
nla_put_failure:
return -ENOBUFS;
}
/* netlink command implementations */
struct key_parse {
struct key_params p;
int idx;
int type;
bool def, defmgmt;
bool def_uni, def_multi;
};
static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k)
{
struct nlattr *tb[NL80211_KEY_MAX + 1];
int err = nla_parse_nested(tb, NL80211_KEY_MAX, key,
nl80211_key_policy, NULL);
if (err)
return err;
k->def = !!tb[NL80211_KEY_DEFAULT];
k->defmgmt = !!tb[NL80211_KEY_DEFAULT_MGMT];
if (k->def) {
k->def_uni = true;
k->def_multi = true;
}
if (k->defmgmt)
k->def_multi = true;
if (tb[NL80211_KEY_IDX])
k->idx = nla_get_u8(tb[NL80211_KEY_IDX]);
if (tb[NL80211_KEY_DATA]) {
k->p.key = nla_data(tb[NL80211_KEY_DATA]);
k->p.key_len = nla_len(tb[NL80211_KEY_DATA]);
}
if (tb[NL80211_KEY_SEQ]) {
k->p.seq = nla_data(tb[NL80211_KEY_SEQ]);
k->p.seq_len = nla_len(tb[NL80211_KEY_SEQ]);
}
if (tb[NL80211_KEY_CIPHER])
k->p.cipher = nla_get_u32(tb[NL80211_KEY_CIPHER]);
if (tb[NL80211_KEY_TYPE]) {
k->type = nla_get_u32(tb[NL80211_KEY_TYPE]);
if (k->type < 0 || k->type >= NUM_NL80211_KEYTYPES)
return -EINVAL;
}
if (tb[NL80211_KEY_DEFAULT_TYPES]) {
struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
err = nla_parse_nested(kdt, NUM_NL80211_KEY_DEFAULT_TYPES - 1,
tb[NL80211_KEY_DEFAULT_TYPES],
nl80211_key_default_policy, NULL);
if (err)
return err;
k->def_uni = kdt[NL80211_KEY_DEFAULT_TYPE_UNICAST];
k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST];
}
return 0;
}
static int nl80211_parse_key_old(struct genl_info *info, struct key_parse *k)
{
if (info->attrs[NL80211_ATTR_KEY_DATA]) {
k->p.key = nla_data(info->attrs[NL80211_ATTR_KEY_DATA]);
k->p.key_len = nla_len(info->attrs[NL80211_ATTR_KEY_DATA]);
}
if (info->attrs[NL80211_ATTR_KEY_SEQ]) {
k->p.seq = nla_data(info->attrs[NL80211_ATTR_KEY_SEQ]);
k->p.seq_len = nla_len(info->attrs[NL80211_ATTR_KEY_SEQ]);
}
if (info->attrs[NL80211_ATTR_KEY_IDX])
k->idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
if (info->attrs[NL80211_ATTR_KEY_CIPHER])
k->p.cipher = nla_get_u32(info->attrs[NL80211_ATTR_KEY_CIPHER]);
k->def = !!info->attrs[NL80211_ATTR_KEY_DEFAULT];
k->defmgmt = !!info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT];
if (k->def) {
k->def_uni = true;
k->def_multi = true;
}
if (k->defmgmt)
k->def_multi = true;
if (info->attrs[NL80211_ATTR_KEY_TYPE]) {
k->type = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]);
if (k->type < 0 || k->type >= NUM_NL80211_KEYTYPES)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_KEY_DEFAULT_TYPES]) {
struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
int err = nla_parse_nested(kdt,
NUM_NL80211_KEY_DEFAULT_TYPES - 1,
info->attrs[NL80211_ATTR_KEY_DEFAULT_TYPES],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_key_default_policy,
info->extack);
if (err)
return err;
k->def_uni = kdt[NL80211_KEY_DEFAULT_TYPE_UNICAST];
k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST];
}
return 0;
}
static int nl80211_parse_key(struct genl_info *info, struct key_parse *k)
{
int err;
memset(k, 0, sizeof(*k));
k->idx = -1;
k->type = -1;
if (info->attrs[NL80211_ATTR_KEY])
err = nl80211_parse_key_new(info->attrs[NL80211_ATTR_KEY], k);
else
err = nl80211_parse_key_old(info, k);
if (err)
return err;
if (k->def && k->defmgmt)
return -EINVAL;
if (k->defmgmt) {
if (k->def_uni || !k->def_multi)
return -EINVAL;
}
if (k->idx != -1) {
if (k->defmgmt) {
if (k->idx < 4 || k->idx > 5)
return -EINVAL;
} else if (k->def) {
if (k->idx < 0 || k->idx > 3)
return -EINVAL;
} else {
if (k->idx < 0 || k->idx > 5)
return -EINVAL;
}
}
return 0;
}
static struct cfg80211_cached_keys *
nl80211_parse_connkeys(struct cfg80211_registered_device *rdev,
struct nlattr *keys, bool *no_ht)
{
struct key_parse parse;
struct nlattr *key;
struct cfg80211_cached_keys *result;
int rem, err, def = 0;
bool have_key = false;
nla_for_each_nested(key, keys, rem) {
have_key = true;
break;
}
if (!have_key)
return NULL;
result = kzalloc(sizeof(*result), GFP_KERNEL);
if (!result)
return ERR_PTR(-ENOMEM);
result->def = -1;
nla_for_each_nested(key, keys, rem) {
memset(&parse, 0, sizeof(parse));
parse.idx = -1;
err = nl80211_parse_key_new(key, &parse);
if (err)
goto error;
err = -EINVAL;
if (!parse.p.key)
goto error;
if (parse.idx < 0 || parse.idx > 3)
goto error;
if (parse.def) {
if (def)
goto error;
def = 1;
result->def = parse.idx;
if (!parse.def_uni || !parse.def_multi)
goto error;
} else if (parse.defmgmt)
goto error;
err = cfg80211_validate_key_settings(rdev, &parse.p,
parse.idx, false, NULL);
if (err)
goto error;
if (parse.p.cipher != WLAN_CIPHER_SUITE_WEP40 &&
parse.p.cipher != WLAN_CIPHER_SUITE_WEP104) {
err = -EINVAL;
goto error;
}
result->params[parse.idx].cipher = parse.p.cipher;
result->params[parse.idx].key_len = parse.p.key_len;
result->params[parse.idx].key = result->data[parse.idx];
memcpy(result->data[parse.idx], parse.p.key, parse.p.key_len);
/* must be WEP key if we got here */
if (no_ht)
*no_ht = true;
}
if (result->def < 0) {
err = -EINVAL;
goto error;
}
return result;
error:
kfree(result);
return ERR_PTR(err);
}
static int nl80211_key_allowed(struct wireless_dev *wdev)
{
ASSERT_WDEV_LOCK(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_MESH_POINT:
break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
if (!wdev->current_bss)
return -ENOLINK;
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_NAN:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_WDS:
case NUM_NL80211_IFTYPES:
return -EINVAL;
}
return 0;
}
static struct ieee80211_channel *nl80211_get_valid_chan(struct wiphy *wiphy,
struct nlattr *tb)
{
struct ieee80211_channel *chan;
if (tb == NULL)
return NULL;
chan = ieee80211_get_channel(wiphy, nla_get_u32(tb));
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
return NULL;
return chan;
}
static int nl80211_put_iftypes(struct sk_buff *msg, u32 attr, u16 ifmodes)
{
struct nlattr *nl_modes = nla_nest_start(msg, attr);
int i;
if (!nl_modes)
goto nla_put_failure;
i = 0;
while (ifmodes) {
if ((ifmodes & 1) && nla_put_flag(msg, i))
goto nla_put_failure;
ifmodes >>= 1;
i++;
}
nla_nest_end(msg, nl_modes);
return 0;
nla_put_failure:
return -ENOBUFS;
}
static int nl80211_put_iface_combinations(struct wiphy *wiphy,
struct sk_buff *msg,
bool large)
{
struct nlattr *nl_combis;
int i, j;
nl_combis = nla_nest_start(msg,
NL80211_ATTR_INTERFACE_COMBINATIONS);
if (!nl_combis)
goto nla_put_failure;
for (i = 0; i < wiphy->n_iface_combinations; i++) {
const struct ieee80211_iface_combination *c;
struct nlattr *nl_combi, *nl_limits;
c = &wiphy->iface_combinations[i];
nl_combi = nla_nest_start(msg, i + 1);
if (!nl_combi)
goto nla_put_failure;
nl_limits = nla_nest_start(msg, NL80211_IFACE_COMB_LIMITS);
if (!nl_limits)
goto nla_put_failure;
for (j = 0; j < c->n_limits; j++) {
struct nlattr *nl_limit;
nl_limit = nla_nest_start(msg, j + 1);
if (!nl_limit)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_IFACE_LIMIT_MAX,
c->limits[j].max))
goto nla_put_failure;
if (nl80211_put_iftypes(msg, NL80211_IFACE_LIMIT_TYPES,
c->limits[j].types))
goto nla_put_failure;
nla_nest_end(msg, nl_limit);
}
nla_nest_end(msg, nl_limits);
if (c->beacon_int_infra_match &&
nla_put_flag(msg, NL80211_IFACE_COMB_STA_AP_BI_MATCH))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_IFACE_COMB_NUM_CHANNELS,
c->num_different_channels) ||
nla_put_u32(msg, NL80211_IFACE_COMB_MAXNUM,
c->max_interfaces))
goto nla_put_failure;
if (large &&
(nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
c->radar_detect_widths) ||
nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
c->radar_detect_regions)))
goto nla_put_failure;
if (c->beacon_int_min_gcd &&
nla_put_u32(msg, NL80211_IFACE_COMB_BI_MIN_GCD,
c->beacon_int_min_gcd))
goto nla_put_failure;
nla_nest_end(msg, nl_combi);
}
nla_nest_end(msg, nl_combis);
return 0;
nla_put_failure:
return -ENOBUFS;
}
#ifdef CONFIG_PM
static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev,
struct sk_buff *msg)
{
const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan->tcp;
struct nlattr *nl_tcp;
if (!tcp)
return 0;
nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION);
if (!nl_tcp)
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
tcp->data_payload_max))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
tcp->data_payload_max))
return -ENOBUFS;
if (tcp->seq && nla_put_flag(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ))
return -ENOBUFS;
if (tcp->tok && nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
sizeof(*tcp->tok), tcp->tok))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL,
tcp->data_interval_max))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
tcp->wake_payload_max))
return -ENOBUFS;
nla_nest_end(msg, nl_tcp);
return 0;
}
static int nl80211_send_wowlan(struct sk_buff *msg,
struct cfg80211_registered_device *rdev,
bool large)
{
struct nlattr *nl_wowlan;
if (!rdev->wiphy.wowlan)
return 0;
nl_wowlan = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED);
if (!nl_wowlan)
return -ENOBUFS;
if (((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_ANY) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_ANY)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_DISCONNECT) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_MAGIC_PKT) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_EAP_IDENTITY_REQ) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_4WAY_HANDSHAKE) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE)) ||
((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_RFKILL_RELEASE) &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE)))
return -ENOBUFS;
if (rdev->wiphy.wowlan->n_patterns) {
struct nl80211_pattern_support pat = {
.max_patterns = rdev->wiphy.wowlan->n_patterns,
.min_pattern_len = rdev->wiphy.wowlan->pattern_min_len,
.max_pattern_len = rdev->wiphy.wowlan->pattern_max_len,
.max_pkt_offset = rdev->wiphy.wowlan->max_pkt_offset,
};
if (nla_put(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN,
sizeof(pat), &pat))
return -ENOBUFS;
}
if ((rdev->wiphy.wowlan->flags & WIPHY_WOWLAN_NET_DETECT) &&
nla_put_u32(msg, NL80211_WOWLAN_TRIG_NET_DETECT,
rdev->wiphy.wowlan->max_nd_match_sets))
return -ENOBUFS;
if (large && nl80211_send_wowlan_tcp_caps(rdev, msg))
return -ENOBUFS;
nla_nest_end(msg, nl_wowlan);
return 0;
}
#endif
static int nl80211_send_coalesce(struct sk_buff *msg,
struct cfg80211_registered_device *rdev)
{
struct nl80211_coalesce_rule_support rule;
if (!rdev->wiphy.coalesce)
return 0;
rule.max_rules = rdev->wiphy.coalesce->n_rules;
rule.max_delay = rdev->wiphy.coalesce->max_delay;
rule.pat.max_patterns = rdev->wiphy.coalesce->n_patterns;
rule.pat.min_pattern_len = rdev->wiphy.coalesce->pattern_min_len;
rule.pat.max_pattern_len = rdev->wiphy.coalesce->pattern_max_len;
rule.pat.max_pkt_offset = rdev->wiphy.coalesce->max_pkt_offset;
if (nla_put(msg, NL80211_ATTR_COALESCE_RULE, sizeof(rule), &rule))
return -ENOBUFS;
return 0;
}
static int nl80211_send_band_rateinfo(struct sk_buff *msg,
struct ieee80211_supported_band *sband)
{
struct nlattr *nl_rates, *nl_rate;
struct ieee80211_rate *rate;
int i;
/* add HT info */
if (sband->ht_cap.ht_supported &&
(nla_put(msg, NL80211_BAND_ATTR_HT_MCS_SET,
sizeof(sband->ht_cap.mcs),
&sband->ht_cap.mcs) ||
nla_put_u16(msg, NL80211_BAND_ATTR_HT_CAPA,
sband->ht_cap.cap) ||
nla_put_u8(msg, NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
sband->ht_cap.ampdu_factor) ||
nla_put_u8(msg, NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
sband->ht_cap.ampdu_density)))
return -ENOBUFS;
cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09 20:50:50 -07:00
/* add VHT info */
if (sband->vht_cap.vht_supported &&
(nla_put(msg, NL80211_BAND_ATTR_VHT_MCS_SET,
sizeof(sband->vht_cap.vht_mcs),
&sband->vht_cap.vht_mcs) ||
nla_put_u32(msg, NL80211_BAND_ATTR_VHT_CAPA,
sband->vht_cap.cap)))
return -ENOBUFS;
/* add bitrates */
nl_rates = nla_nest_start(msg, NL80211_BAND_ATTR_RATES);
if (!nl_rates)
return -ENOBUFS;
for (i = 0; i < sband->n_bitrates; i++) {
nl_rate = nla_nest_start(msg, i);
if (!nl_rate)
return -ENOBUFS;
rate = &sband->bitrates[i];
if (nla_put_u32(msg, NL80211_BITRATE_ATTR_RATE,
rate->bitrate))
return -ENOBUFS;
if ((rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) &&
nla_put_flag(msg,
NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE))
return -ENOBUFS;
nla_nest_end(msg, nl_rate);
}
nla_nest_end(msg, nl_rates);
return 0;
}
static int
nl80211_send_mgmt_stypes(struct sk_buff *msg,
const struct ieee80211_txrx_stypes *mgmt_stypes)
{
u16 stypes;
struct nlattr *nl_ftypes, *nl_ifs;
enum nl80211_iftype ift;
int i;
if (!mgmt_stypes)
return 0;
nl_ifs = nla_nest_start(msg, NL80211_ATTR_TX_FRAME_TYPES);
if (!nl_ifs)
return -ENOBUFS;
for (ift = 0; ift < NUM_NL80211_IFTYPES; ift++) {
nl_ftypes = nla_nest_start(msg, ift);
if (!nl_ftypes)
return -ENOBUFS;
i = 0;
stypes = mgmt_stypes[ift].tx;
while (stypes) {
if ((stypes & 1) &&
nla_put_u16(msg, NL80211_ATTR_FRAME_TYPE,
(i << 4) | IEEE80211_FTYPE_MGMT))
return -ENOBUFS;
stypes >>= 1;
i++;
}
nla_nest_end(msg, nl_ftypes);
}
nla_nest_end(msg, nl_ifs);
nl_ifs = nla_nest_start(msg, NL80211_ATTR_RX_FRAME_TYPES);
if (!nl_ifs)
return -ENOBUFS;
for (ift = 0; ift < NUM_NL80211_IFTYPES; ift++) {
nl_ftypes = nla_nest_start(msg, ift);
if (!nl_ftypes)
return -ENOBUFS;
i = 0;
stypes = mgmt_stypes[ift].rx;
while (stypes) {
if ((stypes & 1) &&
nla_put_u16(msg, NL80211_ATTR_FRAME_TYPE,
(i << 4) | IEEE80211_FTYPE_MGMT))
return -ENOBUFS;
stypes >>= 1;
i++;
}
nla_nest_end(msg, nl_ftypes);
}
nla_nest_end(msg, nl_ifs);
return 0;
}
#define CMD(op, n) \
do { \
if (rdev->ops->op) { \
i++; \
if (nla_put_u32(msg, i, NL80211_CMD_ ## n)) \
goto nla_put_failure; \
} \
} while (0)
static int nl80211_add_commands_unsplit(struct cfg80211_registered_device *rdev,
struct sk_buff *msg)
{
int i = 0;
/*
* do *NOT* add anything into this function, new things need to be
* advertised only to new versions of userspace that can deal with
* the split (and they can't possibly care about new features...
*/
CMD(add_virtual_intf, NEW_INTERFACE);
CMD(change_virtual_intf, SET_INTERFACE);
CMD(add_key, NEW_KEY);
CMD(start_ap, START_AP);
CMD(add_station, NEW_STATION);
CMD(add_mpath, NEW_MPATH);
CMD(update_mesh_config, SET_MESH_CONFIG);
CMD(change_bss, SET_BSS);
CMD(auth, AUTHENTICATE);
CMD(assoc, ASSOCIATE);
CMD(deauth, DEAUTHENTICATE);
CMD(disassoc, DISASSOCIATE);
CMD(join_ibss, JOIN_IBSS);
CMD(join_mesh, JOIN_MESH);
CMD(set_pmksa, SET_PMKSA);
CMD(del_pmksa, DEL_PMKSA);
CMD(flush_pmksa, FLUSH_PMKSA);
if (rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL)
CMD(remain_on_channel, REMAIN_ON_CHANNEL);
CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
CMD(mgmt_tx, FRAME);
CMD(mgmt_tx_cancel_wait, FRAME_WAIT_CANCEL);
if (rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
i++;
if (nla_put_u32(msg, i, NL80211_CMD_SET_WIPHY_NETNS))
goto nla_put_failure;
}
if (rdev->ops->set_monitor_channel || rdev->ops->start_ap ||
rdev->ops->join_mesh) {
i++;
if (nla_put_u32(msg, i, NL80211_CMD_SET_CHANNEL))
goto nla_put_failure;
}
CMD(set_wds_peer, SET_WDS_PEER);
if (rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) {
CMD(tdls_mgmt, TDLS_MGMT);
CMD(tdls_oper, TDLS_OPER);
}
if (rdev->wiphy.max_sched_scan_reqs)
CMD(sched_scan_start, START_SCHED_SCAN);
CMD(probe_client, PROBE_CLIENT);
CMD(set_noack_map, SET_NOACK_MAP);
if (rdev->wiphy.flags & WIPHY_FLAG_REPORTS_OBSS) {
i++;
if (nla_put_u32(msg, i, NL80211_CMD_REGISTER_BEACONS))
goto nla_put_failure;
}
CMD(start_p2p_device, START_P2P_DEVICE);
CMD(set_mcast_rate, SET_MCAST_RATE);
#ifdef CONFIG_NL80211_TESTMODE
CMD(testmode_cmd, TESTMODE);
#endif
if (rdev->ops->connect || rdev->ops->auth) {
i++;
if (nla_put_u32(msg, i, NL80211_CMD_CONNECT))
goto nla_put_failure;
}
if (rdev->ops->disconnect || rdev->ops->deauth) {
i++;
if (nla_put_u32(msg, i, NL80211_CMD_DISCONNECT))
goto nla_put_failure;
}
return i;
nla_put_failure:
return -ENOBUFS;
}
struct nl80211_dump_wiphy_state {
s64 filter_wiphy;
long start;
long split_start, band_start, chan_start, capa_start;
bool split;
};
static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
enum nl80211_commands cmd,
struct sk_buff *msg, u32 portid, u32 seq,
int flags, struct nl80211_dump_wiphy_state *state)
{
void *hdr;
struct nlattr *nl_bands, *nl_band;
struct nlattr *nl_freqs, *nl_freq;
struct nlattr *nl_cmds;
enum nl80211_band band;
struct ieee80211_channel *chan;
int i;
const struct ieee80211_txrx_stypes *mgmt_stypes =
rdev->wiphy.mgmt_stypes;
u32 features;
hdr = nl80211hdr_put(msg, portid, seq, flags, cmd);
if (!hdr)
return -ENOBUFS;
if (WARN_ON(!state))
return -EINVAL;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_string(msg, NL80211_ATTR_WIPHY_NAME,
wiphy_name(&rdev->wiphy)) ||
nla_put_u32(msg, NL80211_ATTR_GENERATION,
cfg80211_rdev_list_generation))
goto nla_put_failure;
if (cmd != NL80211_CMD_NEW_WIPHY)
goto finish;
switch (state->split_start) {
case 0:
if (nla_put_u8(msg, NL80211_ATTR_WIPHY_RETRY_SHORT,
rdev->wiphy.retry_short) ||
nla_put_u8(msg, NL80211_ATTR_WIPHY_RETRY_LONG,
rdev->wiphy.retry_long) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
rdev->wiphy.frag_threshold) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_RTS_THRESHOLD,
rdev->wiphy.rts_threshold) ||
nla_put_u8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS,
rdev->wiphy.coverage_class) ||
nla_put_u8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
rdev->wiphy.max_scan_ssids) ||
nla_put_u8(msg, NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
rdev->wiphy.max_sched_scan_ssids) ||
nla_put_u16(msg, NL80211_ATTR_MAX_SCAN_IE_LEN,
rdev->wiphy.max_scan_ie_len) ||
nla_put_u16(msg, NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
rdev->wiphy.max_sched_scan_ie_len) ||
nla_put_u8(msg, NL80211_ATTR_MAX_MATCH_SETS,
rdev->wiphy.max_match_sets) ||
nla_put_u32(msg, NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
rdev->wiphy.max_sched_scan_plans) ||
nla_put_u32(msg, NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
rdev->wiphy.max_sched_scan_plan_interval) ||
nla_put_u32(msg, NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
rdev->wiphy.max_sched_scan_plan_iterations))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN) &&
nla_put_flag(msg, NL80211_ATTR_SUPPORT_IBSS_RSN))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
nla_put_flag(msg, NL80211_ATTR_SUPPORT_MESH_AUTH))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_AP_UAPSD) &&
nla_put_flag(msg, NL80211_ATTR_SUPPORT_AP_UAPSD))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_FW_ROAM) &&
nla_put_flag(msg, NL80211_ATTR_ROAM_SUPPORT))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) &&
nla_put_flag(msg, NL80211_ATTR_TDLS_SUPPORT))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP) &&
nla_put_flag(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP))
goto nla_put_failure;
state->split_start++;
if (state->split)
break;
case 1:
if (nla_put(msg, NL80211_ATTR_CIPHER_SUITES,
sizeof(u32) * rdev->wiphy.n_cipher_suites,
rdev->wiphy.cipher_suites))
goto nla_put_failure;
if (nla_put_u8(msg, NL80211_ATTR_MAX_NUM_PMKIDS,
rdev->wiphy.max_num_pmkids))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) &&
nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
rdev->wiphy.available_antennas_tx) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
rdev->wiphy.available_antennas_rx))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) &&
nla_put_u32(msg, NL80211_ATTR_PROBE_RESP_OFFLOAD,
rdev->wiphy.probe_resp_offload))
goto nla_put_failure;
if ((rdev->wiphy.available_antennas_tx ||
rdev->wiphy.available_antennas_rx) &&
rdev->ops->get_antenna) {
u32 tx_ant = 0, rx_ant = 0;
int res;
res = rdev_get_antenna(rdev, &tx_ant, &rx_ant);
if (!res) {
if (nla_put_u32(msg,
NL80211_ATTR_WIPHY_ANTENNA_TX,
tx_ant) ||
nla_put_u32(msg,
NL80211_ATTR_WIPHY_ANTENNA_RX,
rx_ant))
goto nla_put_failure;
}
}
state->split_start++;
if (state->split)
break;
case 2:
if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
rdev->wiphy.interface_modes))
goto nla_put_failure;
state->split_start++;
if (state->split)
break;
case 3:
nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
if (!nl_bands)
goto nla_put_failure;
for (band = state->band_start;
band < NUM_NL80211_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = rdev->wiphy.bands[band];
if (!sband)
continue;
nl_band = nla_nest_start(msg, band);
if (!nl_band)
goto nla_put_failure;
switch (state->chan_start) {
case 0:
if (nl80211_send_band_rateinfo(msg, sband))
goto nla_put_failure;
state->chan_start++;
if (state->split)
break;
default:
/* add frequencies */
nl_freqs = nla_nest_start(
msg, NL80211_BAND_ATTR_FREQS);
if (!nl_freqs)
goto nla_put_failure;
for (i = state->chan_start - 1;
i < sband->n_channels;
i++) {
nl_freq = nla_nest_start(msg, i);
if (!nl_freq)
goto nla_put_failure;
chan = &sband->channels[i];
if (nl80211_msg_put_channel(
msg, chan,
state->split))
goto nla_put_failure;
nla_nest_end(msg, nl_freq);
if (state->split)
break;
}
if (i < sband->n_channels)
state->chan_start = i + 2;
else
state->chan_start = 0;
nla_nest_end(msg, nl_freqs);
}
nla_nest_end(msg, nl_band);
if (state->split) {
/* start again here */
if (state->chan_start)
band--;
break;
}
}
nla_nest_end(msg, nl_bands);
if (band < NUM_NL80211_BANDS)
state->band_start = band + 1;
else
state->band_start = 0;
/* if bands & channels are done, continue outside */
if (state->band_start == 0 && state->chan_start == 0)
state->split_start++;
if (state->split)
break;
case 4:
nl_cmds = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_COMMANDS);
if (!nl_cmds)
goto nla_put_failure;
i = nl80211_add_commands_unsplit(rdev, msg);
if (i < 0)
goto nla_put_failure;
if (state->split) {
CMD(crit_proto_start, CRIT_PROTOCOL_START);
CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
CMD(channel_switch, CHANNEL_SWITCH);
CMD(set_qos_map, SET_QOS_MAP);
if (rdev->wiphy.features &
NL80211_FEATURE_SUPPORTS_WMM_ADMISSION)
CMD(add_tx_ts, ADD_TX_TS);
CMD(set_multicast_to_unicast, SET_MULTICAST_TO_UNICAST);
CMD(update_connect_params, UPDATE_CONNECT_PARAMS);
}
#undef CMD
nla_nest_end(msg, nl_cmds);
state->split_start++;
if (state->split)
break;
case 5:
if (rdev->ops->remain_on_channel &&
(rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL) &&
nla_put_u32(msg,
NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
rdev->wiphy.max_remain_on_channel_duration))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_OFFCHAN_TX) &&
nla_put_flag(msg, NL80211_ATTR_OFFCHANNEL_TX_OK))
goto nla_put_failure;
if (nl80211_send_mgmt_stypes(msg, mgmt_stypes))
goto nla_put_failure;
state->split_start++;
if (state->split)
break;
case 6:
#ifdef CONFIG_PM
if (nl80211_send_wowlan(msg, rdev, state->split))
goto nla_put_failure;
state->split_start++;
if (state->split)
break;
#else
state->split_start++;
#endif
case 7:
if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
rdev->wiphy.software_iftypes))
goto nla_put_failure;
if (nl80211_put_iface_combinations(&rdev->wiphy, msg,
state->split))
goto nla_put_failure;
state->split_start++;
if (state->split)
break;
case 8:
if ((rdev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME) &&
nla_put_u32(msg, NL80211_ATTR_DEVICE_AP_SME,
rdev->wiphy.ap_sme_capa))
goto nla_put_failure;
features = rdev->wiphy.features;
/*
* We can only add the per-channel limit information if the
* dump is split, otherwise it makes it too big. Therefore
* only advertise it in that case.
*/
if (state->split)
features |= NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
if (nla_put_u32(msg, NL80211_ATTR_FEATURE_FLAGS, features))
goto nla_put_failure;
if (rdev->wiphy.ht_capa_mod_mask &&
nla_put(msg, NL80211_ATTR_HT_CAPABILITY_MASK,
sizeof(*rdev->wiphy.ht_capa_mod_mask),
rdev->wiphy.ht_capa_mod_mask))
goto nla_put_failure;
if (rdev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME &&
rdev->wiphy.max_acl_mac_addrs &&
nla_put_u32(msg, NL80211_ATTR_MAC_ACL_MAX,
rdev->wiphy.max_acl_mac_addrs))
goto nla_put_failure;
/*
* Any information below this point is only available to
* applications that can deal with it being split. This
* helps ensure that newly added capabilities don't break
* older tools by overrunning their buffers.
*
* We still increment split_start so that in the split
* case we'll continue with more data in the next round,
* but break unconditionally so unsplit data stops here.
*/
state->split_start++;
break;
case 9:
if (rdev->wiphy.extended_capabilities &&
(nla_put(msg, NL80211_ATTR_EXT_CAPA,
rdev->wiphy.extended_capabilities_len,
rdev->wiphy.extended_capabilities) ||
nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
rdev->wiphy.extended_capabilities_len,
rdev->wiphy.extended_capabilities_mask)))
goto nla_put_failure;
if (rdev->wiphy.vht_capa_mod_mask &&
nla_put(msg, NL80211_ATTR_VHT_CAPABILITY_MASK,
sizeof(*rdev->wiphy.vht_capa_mod_mask),
rdev->wiphy.vht_capa_mod_mask))
goto nla_put_failure;
state->split_start++;
break;
case 10:
if (nl80211_send_coalesce(msg, rdev))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ) &&
(nla_put_flag(msg, NL80211_ATTR_SUPPORT_5_MHZ) ||
nla_put_flag(msg, NL80211_ATTR_SUPPORT_10_MHZ)))
goto nla_put_failure;
if (rdev->wiphy.max_ap_assoc_sta &&
nla_put_u32(msg, NL80211_ATTR_MAX_AP_ASSOC_STA,
rdev->wiphy.max_ap_assoc_sta))
goto nla_put_failure;
state->split_start++;
break;
case 11:
if (rdev->wiphy.n_vendor_commands) {
const struct nl80211_vendor_cmd_info *info;
struct nlattr *nested;
nested = nla_nest_start(msg, NL80211_ATTR_VENDOR_DATA);
if (!nested)
goto nla_put_failure;
for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
info = &rdev->wiphy.vendor_commands[i].info;
if (nla_put(msg, i + 1, sizeof(*info), info))
goto nla_put_failure;
}
nla_nest_end(msg, nested);
}
if (rdev->wiphy.n_vendor_events) {
const struct nl80211_vendor_cmd_info *info;
struct nlattr *nested;
nested = nla_nest_start(msg,
NL80211_ATTR_VENDOR_EVENTS);
if (!nested)
goto nla_put_failure;
for (i = 0; i < rdev->wiphy.n_vendor_events; i++) {
info = &rdev->wiphy.vendor_events[i];
if (nla_put(msg, i + 1, sizeof(*info), info))
goto nla_put_failure;
}
nla_nest_end(msg, nested);
}
state->split_start++;
break;
case 12:
if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH &&
nla_put_u8(msg, NL80211_ATTR_MAX_CSA_COUNTERS,
rdev->wiphy.max_num_csa_counters))
goto nla_put_failure;
if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED &&
nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
goto nla_put_failure;
if (rdev->wiphy.max_sched_scan_reqs &&
nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_MAX_REQS,
rdev->wiphy.max_sched_scan_reqs))
goto nla_put_failure;
if (nla_put(msg, NL80211_ATTR_EXT_FEATURES,
sizeof(rdev->wiphy.ext_features),
rdev->wiphy.ext_features))
goto nla_put_failure;
if (rdev->wiphy.bss_select_support) {
struct nlattr *nested;
u32 bss_select_support = rdev->wiphy.bss_select_support;
nested = nla_nest_start(msg, NL80211_ATTR_BSS_SELECT);
if (!nested)
goto nla_put_failure;
i = 0;
while (bss_select_support) {
if ((bss_select_support & 1) &&
nla_put_flag(msg, i))
goto nla_put_failure;
i++;
bss_select_support >>= 1;
}
nla_nest_end(msg, nested);
}
state->split_start++;
break;
case 13:
if (rdev->wiphy.num_iftype_ext_capab &&
rdev->wiphy.iftype_ext_capab) {
struct nlattr *nested_ext_capab, *nested;
nested = nla_nest_start(msg,
NL80211_ATTR_IFTYPE_EXT_CAPA);
if (!nested)
goto nla_put_failure;
for (i = state->capa_start;
i < rdev->wiphy.num_iftype_ext_capab; i++) {
const struct wiphy_iftype_ext_capab *capab;
capab = &rdev->wiphy.iftype_ext_capab[i];
nested_ext_capab = nla_nest_start(msg, i);
if (!nested_ext_capab ||
nla_put_u32(msg, NL80211_ATTR_IFTYPE,
capab->iftype) ||
nla_put(msg, NL80211_ATTR_EXT_CAPA,
capab->extended_capabilities_len,
capab->extended_capabilities) ||
nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
capab->extended_capabilities_len,
capab->extended_capabilities_mask))
goto nla_put_failure;
nla_nest_end(msg, nested_ext_capab);
if (state->split)
break;
}
nla_nest_end(msg, nested);
if (i < rdev->wiphy.num_iftype_ext_capab) {
state->capa_start = i + 1;
break;
}
}
if (nla_put_u32(msg, NL80211_ATTR_BANDS,
rdev->wiphy.nan_supported_bands))
goto nla_put_failure;
/* done */
state->split_start = 0;
break;
}
finish:
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_wiphy_parse(struct sk_buff *skb,
struct netlink_callback *cb,
struct nl80211_dump_wiphy_state *state)
{
struct nlattr **tb = genl_family_attrbuf(&nl80211_fam);
int ret = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, tb,
nl80211_fam.maxattr, nl80211_policy, NULL);
/* ignore parse errors for backward compatibility */
if (ret)
return 0;
state->split = tb[NL80211_ATTR_SPLIT_WIPHY_DUMP];
if (tb[NL80211_ATTR_WIPHY])
state->filter_wiphy = nla_get_u32(tb[NL80211_ATTR_WIPHY]);
if (tb[NL80211_ATTR_WDEV])
state->filter_wiphy = nla_get_u64(tb[NL80211_ATTR_WDEV]) >> 32;
if (tb[NL80211_ATTR_IFINDEX]) {
struct net_device *netdev;
struct cfg80211_registered_device *rdev;
int ifidx = nla_get_u32(tb[NL80211_ATTR_IFINDEX]);
netdev = __dev_get_by_index(sock_net(skb->sk), ifidx);
if (!netdev)
return -ENODEV;
if (netdev->ieee80211_ptr) {
rdev = wiphy_to_rdev(
netdev->ieee80211_ptr->wiphy);
state->filter_wiphy = rdev->wiphy_idx;
}
}
return 0;
}
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
{
int idx = 0, ret;
struct nl80211_dump_wiphy_state *state = (void *)cb->args[0];
struct cfg80211_registered_device *rdev;
rtnl_lock();
if (!state) {
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state) {
rtnl_unlock();
return -ENOMEM;
}
state->filter_wiphy = -1;
ret = nl80211_dump_wiphy_parse(skb, cb, state);
if (ret) {
kfree(state);
rtnl_unlock();
return ret;
}
cb->args[0] = (long)state;
}
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (!net_eq(wiphy_net(&rdev->wiphy), sock_net(skb->sk)))
continue;
if (++idx <= state->start)
continue;
if (state->filter_wiphy != -1 &&
state->filter_wiphy != rdev->wiphy_idx)
continue;
/* attempt to fit multiple wiphy data chunks into the skb */
do {
ret = nl80211_send_wiphy(rdev, NL80211_CMD_NEW_WIPHY,
skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
NLM_F_MULTI, state);
if (ret < 0) {
/*
* If sending the wiphy data didn't fit (ENOBUFS
* or EMSGSIZE returned), this SKB is still
* empty (so it's not too big because another
* wiphy dataset is already in the skb) and
* we've not tried to adjust the dump allocation
* yet ... then adjust the alloc size to be
* bigger, and return 1 but with the empty skb.
* This results in an empty message being RX'ed
* in userspace, but that is ignored.
*
* We can then retry with the larger buffer.
*/
if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
!skb->len && !state->split &&
cb->min_dump_alloc < 4096) {
cb->min_dump_alloc = 4096;
state->split_start = 0;
rtnl_unlock();
return 1;
}
idx--;
break;
}
} while (state->split_start > 0);
break;
}
rtnl_unlock();
state->start = idx;
return skb->len;
}
static int nl80211_dump_wiphy_done(struct netlink_callback *cb)
{
kfree((void *)cb->args[0]);
return 0;
}
static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
{
struct sk_buff *msg;
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct nl80211_dump_wiphy_state state = {};
msg = nlmsg_new(4096, GFP_KERNEL);
if (!msg)
return -ENOMEM;
if (nl80211_send_wiphy(rdev, NL80211_CMD_NEW_WIPHY, msg,
info->snd_portid, info->snd_seq, 0,
&state) < 0) {
nlmsg_free(msg);
return -ENOBUFS;
}
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 03:51:34 -06:00
return genlmsg_reply(msg, info);
}
static const struct nla_policy txq_params_policy[NL80211_TXQ_ATTR_MAX + 1] = {
[NL80211_TXQ_ATTR_QUEUE] = { .type = NLA_U8 },
[NL80211_TXQ_ATTR_TXOP] = { .type = NLA_U16 },
[NL80211_TXQ_ATTR_CWMIN] = { .type = NLA_U16 },
[NL80211_TXQ_ATTR_CWMAX] = { .type = NLA_U16 },
[NL80211_TXQ_ATTR_AIFS] = { .type = NLA_U8 },
};
static int parse_txq_params(struct nlattr *tb[],
struct ieee80211_txq_params *txq_params)
{
u8 ac;
if (!tb[NL80211_TXQ_ATTR_AC] || !tb[NL80211_TXQ_ATTR_TXOP] ||
!tb[NL80211_TXQ_ATTR_CWMIN] || !tb[NL80211_TXQ_ATTR_CWMAX] ||
!tb[NL80211_TXQ_ATTR_AIFS])
return -EINVAL;
ac = nla_get_u8(tb[NL80211_TXQ_ATTR_AC]);
txq_params->txop = nla_get_u16(tb[NL80211_TXQ_ATTR_TXOP]);
txq_params->cwmin = nla_get_u16(tb[NL80211_TXQ_ATTR_CWMIN]);
txq_params->cwmax = nla_get_u16(tb[NL80211_TXQ_ATTR_CWMAX]);
txq_params->aifs = nla_get_u8(tb[NL80211_TXQ_ATTR_AIFS]);
if (ac >= NL80211_NUM_ACS)
return -EINVAL;
txq_params->ac = array_index_nospec(ac, NL80211_NUM_ACS);
return 0;
}
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
{
/*
* You can only set the channel explicitly for WDS interfaces,
* all others have their channel managed via their respective
* "establish a connection" command (connect, join, ...)
*
* For AP/GO and mesh mode, the channel can be set with the
* channel userspace API, but is only stored and passed to the
* low-level driver when the AP starts or the mesh is joined.
* This is for backward compatibility, userspace can also give
* the channel in the start-ap or join-mesh commands instead.
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
*
* Monitors are special as they are normally slaved to
* whatever else is going on, so they have their own special
* operation to set the monitor channel if possible.
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
*/
return !wdev ||
wdev->iftype == NL80211_IFTYPE_AP ||
wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
wdev->iftype == NL80211_IFTYPE_MONITOR ||
wdev->iftype == NL80211_IFTYPE_P2P_GO;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
}
static int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
struct genl_info *info,
struct cfg80211_chan_def *chandef)
{
u32 control_freq;
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
control_freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
chandef->center_freq1 = control_freq;
chandef->center_freq2 = 0;
/* Primary channel not allowed */
if (!chandef->chan || chandef->chan->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
enum nl80211_channel_type chantype;
chantype = nla_get_u32(
info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
switch (chantype) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
case NL80211_CHAN_HT40PLUS:
case NL80211_CHAN_HT40MINUS:
cfg80211_chandef_create(chandef, chandef->chan,
chantype);
break;
default:
return -EINVAL;
}
} else if (info->attrs[NL80211_ATTR_CHANNEL_WIDTH]) {
chandef->width =
nla_get_u32(info->attrs[NL80211_ATTR_CHANNEL_WIDTH]);
if (info->attrs[NL80211_ATTR_CENTER_FREQ1])
chandef->center_freq1 =
nla_get_u32(
info->attrs[NL80211_ATTR_CENTER_FREQ1]);
if (info->attrs[NL80211_ATTR_CENTER_FREQ2])
chandef->center_freq2 =
nla_get_u32(
info->attrs[NL80211_ATTR_CENTER_FREQ2]);
}
if (!cfg80211_chandef_valid(chandef))
return -EINVAL;
if (!cfg80211_chandef_usable(&rdev->wiphy, chandef,
IEEE80211_CHAN_DISABLED))
return -EINVAL;
if ((chandef->width == NL80211_CHAN_WIDTH_5 ||
chandef->width == NL80211_CHAN_WIDTH_10) &&
!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ))
return -EINVAL;
return 0;
}
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
struct net_device *dev,
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
struct genl_info *info)
{
struct cfg80211_chan_def chandef;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
int result;
enum nl80211_iftype iftype = NL80211_IFTYPE_MONITOR;
struct wireless_dev *wdev = NULL;
if (dev)
wdev = dev->ieee80211_ptr;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
if (!nl80211_can_set_dev_channel(wdev))
return -EOPNOTSUPP;
if (wdev)
iftype = wdev->iftype;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
result = nl80211_parse_chandef(rdev, info, &chandef);
if (result)
return result;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &chandef,
iftype)) {
result = -EINVAL;
break;
}
if (wdev->beacon_interval) {
if (!dev || !rdev->ops->set_ap_chanwidth ||
!(rdev->wiphy.features &
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE)) {
result = -EBUSY;
break;
}
/* Only allow dynamic channel width changes */
if (chandef.chan != wdev->preset_chandef.chan) {
result = -EBUSY;
break;
}
result = rdev_set_ap_chanwidth(rdev, dev, &chandef);
if (result)
break;
}
wdev->preset_chandef = chandef;
result = 0;
break;
case NL80211_IFTYPE_MESH_POINT:
result = cfg80211_set_mesh_channel(rdev, wdev, &chandef);
break;
case NL80211_IFTYPE_MONITOR:
result = cfg80211_set_monitor_channel(rdev, &chandef);
break;
default:
result = -EINVAL;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
}
return result;
}
static int nl80211_set_channel(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *netdev = info->user_ptr[1];
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
return __nl80211_set_channel(rdev, netdev, info);
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
}
static int nl80211_set_wds_peer(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *bssid;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (netif_running(dev))
return -EBUSY;
if (!rdev->ops->set_wds_peer)
return -EOPNOTSUPP;
if (wdev->iftype != NL80211_IFTYPE_WDS)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
return rdev_set_wds_peer(rdev, dev, bssid);
}
static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
struct net_device *netdev = NULL;
struct wireless_dev *wdev;
int result = 0, rem_txq_params = 0;
struct nlattr *nl_txq_params;
u32 changed;
u8 retry_short = 0, retry_long = 0;
u32 frag_threshold = 0, rts_threshold = 0;
u8 coverage_class = 0;
ASSERT_RTNL();
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
/*
* Try to find the wiphy and netdev. Normally this
* function shouldn't need the netdev, but this is
* done for backward compatibility -- previously
* setting the channel was done per wiphy, but now
* it is per netdev. Previous userland like hostapd
* also passed a netdev to set_wiphy, so that it is
* possible to let that go to the right netdev!
*/
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
if (info->attrs[NL80211_ATTR_IFINDEX]) {
int ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
netdev = __dev_get_by_index(genl_info_net(info), ifindex);
if (netdev && netdev->ieee80211_ptr)
rdev = wiphy_to_rdev(netdev->ieee80211_ptr->wiphy);
else
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
netdev = NULL;
}
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
if (!netdev) {
rdev = __cfg80211_rdev_from_attrs(genl_info_net(info),
info->attrs);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
wdev = NULL;
netdev = NULL;
result = 0;
} else
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
wdev = netdev->ieee80211_ptr;
/*
* end workaround code, by now the rdev is available
* and locked, and wdev may or may not be NULL.
*/
if (info->attrs[NL80211_ATTR_WIPHY_NAME])
result = cfg80211_dev_rename(
rdev, nla_data(info->attrs[NL80211_ATTR_WIPHY_NAME]));
if (result)
return result;
if (info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS]) {
struct ieee80211_txq_params txq_params;
struct nlattr *tb[NL80211_TXQ_ATTR_MAX + 1];
if (!rdev->ops->set_txq_params)
return -EOPNOTSUPP;
if (!netdev)
return -EINVAL;
if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
if (!netif_running(netdev))
return -ENETDOWN;
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
result = nla_parse_nested(tb, NL80211_TXQ_ATTR_MAX,
nl_txq_params,
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
txq_params_policy,
info->extack);
if (result)
return result;
result = parse_txq_params(tb, &txq_params);
if (result)
return result;
result = rdev_set_txq_params(rdev, netdev,
&txq_params);
if (result)
return result;
}
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
result = __nl80211_set_channel(
rdev,
nl80211_can_set_dev_channel(wdev) ? netdev : NULL,
info);
if (result)
return result;
}
if (info->attrs[NL80211_ATTR_WIPHY_TX_POWER_SETTING]) {
struct wireless_dev *txp_wdev = wdev;
enum nl80211_tx_power_setting type;
int idx, mbm = 0;
if (!(rdev->wiphy.features & NL80211_FEATURE_VIF_TXPOWER))
txp_wdev = NULL;
if (!rdev->ops->set_tx_power)
return -EOPNOTSUPP;
idx = NL80211_ATTR_WIPHY_TX_POWER_SETTING;
type = nla_get_u32(info->attrs[idx]);
if (!info->attrs[NL80211_ATTR_WIPHY_TX_POWER_LEVEL] &&
(type != NL80211_TX_POWER_AUTOMATIC))
return -EINVAL;
if (type != NL80211_TX_POWER_AUTOMATIC) {
idx = NL80211_ATTR_WIPHY_TX_POWER_LEVEL;
mbm = nla_get_u32(info->attrs[idx]);
}
result = rdev_set_tx_power(rdev, txp_wdev, type, mbm);
if (result)
return result;
}
cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09 20:50:50 -07:00
if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
u32 tx_ant, rx_ant;
if ((!rdev->wiphy.available_antennas_tx &&
!rdev->wiphy.available_antennas_rx) ||
!rdev->ops->set_antenna)
return -EOPNOTSUPP;
cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09 20:50:50 -07:00
tx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX]);
rx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]);
/* reject antenna configurations which don't match the
* available antenna masks, except for the "all" mask */
if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas_tx)) ||
(~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas_rx)))
return -EINVAL;
tx_ant = tx_ant & rdev->wiphy.available_antennas_tx;
rx_ant = rx_ant & rdev->wiphy.available_antennas_rx;
result = rdev_set_antenna(rdev, tx_ant, rx_ant);
cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09 20:50:50 -07:00
if (result)
return result;
cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09 20:50:50 -07:00
}
changed = 0;
if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) {
retry_short = nla_get_u8(
info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]);
if (retry_short == 0)
return -EINVAL;
changed |= WIPHY_PARAM_RETRY_SHORT;
}
if (info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]) {
retry_long = nla_get_u8(
info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]);
if (retry_long == 0)
return -EINVAL;
changed |= WIPHY_PARAM_RETRY_LONG;
}
if (info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]) {
frag_threshold = nla_get_u32(
info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]);
if (frag_threshold < 256)
return -EINVAL;
if (frag_threshold != (u32) -1) {
/*
* Fragments (apart from the last one) are required to
* have even length. Make the fragmentation code
* simpler by stripping LSB should someone try to use
* odd threshold value.
*/
frag_threshold &= ~0x1;
}
changed |= WIPHY_PARAM_FRAG_THRESHOLD;
}
if (info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]) {
rts_threshold = nla_get_u32(
info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]);
changed |= WIPHY_PARAM_RTS_THRESHOLD;
}
if (info->attrs[NL80211_ATTR_WIPHY_COVERAGE_CLASS]) {
if (info->attrs[NL80211_ATTR_WIPHY_DYN_ACK])
return -EINVAL;
coverage_class = nla_get_u8(
info->attrs[NL80211_ATTR_WIPHY_COVERAGE_CLASS]);
changed |= WIPHY_PARAM_COVERAGE_CLASS;
}
if (info->attrs[NL80211_ATTR_WIPHY_DYN_ACK]) {
if (!(rdev->wiphy.features & NL80211_FEATURE_ACKTO_ESTIMATION))
return -EOPNOTSUPP;
changed |= WIPHY_PARAM_DYN_ACK;
}
if (changed) {
u8 old_retry_short, old_retry_long;
u32 old_frag_threshold, old_rts_threshold;
u8 old_coverage_class;
if (!rdev->ops->set_wiphy_params)
return -EOPNOTSUPP;
old_retry_short = rdev->wiphy.retry_short;
old_retry_long = rdev->wiphy.retry_long;
old_frag_threshold = rdev->wiphy.frag_threshold;
old_rts_threshold = rdev->wiphy.rts_threshold;
old_coverage_class = rdev->wiphy.coverage_class;
if (changed & WIPHY_PARAM_RETRY_SHORT)
rdev->wiphy.retry_short = retry_short;
if (changed & WIPHY_PARAM_RETRY_LONG)
rdev->wiphy.retry_long = retry_long;
if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
rdev->wiphy.frag_threshold = frag_threshold;
if (changed & WIPHY_PARAM_RTS_THRESHOLD)
rdev->wiphy.rts_threshold = rts_threshold;
if (changed & WIPHY_PARAM_COVERAGE_CLASS)
rdev->wiphy.coverage_class = coverage_class;
result = rdev_set_wiphy_params(rdev, changed);
if (result) {
rdev->wiphy.retry_short = old_retry_short;
rdev->wiphy.retry_long = old_retry_long;
rdev->wiphy.frag_threshold = old_frag_threshold;
rdev->wiphy.rts_threshold = old_rts_threshold;
rdev->wiphy.coverage_class = old_coverage_class;
return result;
}
}
return 0;
}
static inline u64 wdev_id(struct wireless_dev *wdev)
{
return (u64)wdev->identifier |
((u64)wiphy_to_rdev(wdev->wiphy)->wiphy_idx << 32);
}
static int nl80211_send_chandef(struct sk_buff *msg,
const struct cfg80211_chan_def *chandef)
{
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return -EINVAL;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
chandef->chan->center_freq))
return -ENOBUFS;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_40:
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
cfg80211_get_chandef_type(chandef)))
return -ENOBUFS;
break;
default:
break;
}
if (nla_put_u32(msg, NL80211_ATTR_CHANNEL_WIDTH, chandef->width))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_ATTR_CENTER_FREQ1, chandef->center_freq1))
return -ENOBUFS;
if (chandef->center_freq2 &&
nla_put_u32(msg, NL80211_ATTR_CENTER_FREQ2, chandef->center_freq2))
return -ENOBUFS;
return 0;
}
static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flags,
struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, bool removal)
{
struct net_device *dev = wdev->netdev;
u8 cmd = NL80211_CMD_NEW_INTERFACE;
void *hdr;
if (removal)
cmd = NL80211_CMD_DEL_INTERFACE;
hdr = nl80211hdr_put(msg, portid, seq, flags, cmd);
if (!hdr)
return -1;
if (dev &&
(nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name)))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFTYPE, wdev->iftype) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) ||
nla_put_u32(msg, NL80211_ATTR_GENERATION,
rdev->devlist_generation ^
(cfg80211_rdev_list_generation << 2)))
goto nla_put_failure;
if (rdev->ops->get_channel) {
int ret;
struct cfg80211_chan_def chandef;
ret = rdev_get_channel(rdev, wdev, &chandef);
if (ret == 0) {
if (nl80211_send_chandef(msg, &chandef))
goto nla_put_failure;
}
}
if (rdev->ops->get_tx_power) {
int dbm, ret;
ret = rdev_get_tx_power(rdev, wdev, &dbm);
if (ret == 0 &&
nla_put_u32(msg, NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
DBM_TO_MBM(dbm)))
goto nla_put_failure;
}
if (wdev->ssid_len) {
if (nla_put(msg, NL80211_ATTR_SSID, wdev->ssid_len, wdev->ssid))
goto nla_put_failure;
}
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
{
int wp_idx = 0;
int if_idx = 0;
int wp_start = cb->args[0];
int if_start = cb->args[1];
int filter_wiphy = -1;
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
int ret;
rtnl_lock();
if (!cb->args[2]) {
struct nl80211_dump_wiphy_state state = {
.filter_wiphy = -1,
};
ret = nl80211_dump_wiphy_parse(skb, cb, &state);
if (ret)
goto out_unlock;
filter_wiphy = state.filter_wiphy;
/*
* if filtering, set cb->args[2] to +1 since 0 is the default
* value needed to determine that parsing is necessary.
*/
if (filter_wiphy >= 0)
cb->args[2] = filter_wiphy + 1;
else
cb->args[2] = -1;
} else if (cb->args[2] > 0) {
filter_wiphy = cb->args[2] - 1;
}
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (!net_eq(wiphy_net(&rdev->wiphy), sock_net(skb->sk)))
continue;
if (wp_idx < wp_start) {
wp_idx++;
continue;
}
if (filter_wiphy >= 0 && filter_wiphy != rdev->wiphy_idx)
continue;
if_idx = 0;
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (if_idx < if_start) {
if_idx++;
continue;
}
if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
rdev, wdev, false) < 0) {
goto out;
}
if_idx++;
}
wp_idx++;
}
out:
cb->args[0] = wp_idx;
cb->args[1] = if_idx;
ret = skb->len;
out_unlock:
rtnl_unlock();
return ret;
}
static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
{
struct sk_buff *msg;
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
if (nl80211_send_iface(msg, info->snd_portid, info->snd_seq, 0,
rdev, wdev, false) < 0) {
nlmsg_free(msg);
return -ENOBUFS;
}
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 03:51:34 -06:00
return genlmsg_reply(msg, info);
}
static const struct nla_policy mntr_flags_policy[NL80211_MNTR_FLAG_MAX + 1] = {
[NL80211_MNTR_FLAG_FCSFAIL] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_PLCPFAIL] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_CONTROL] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_OTHER_BSS] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_COOK_FRAMES] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_ACTIVE] = { .type = NLA_FLAG },
};
static int parse_monitor_flags(struct nlattr *nla, u32 *mntrflags)
{
struct nlattr *flags[NL80211_MNTR_FLAG_MAX + 1];
int flag;
*mntrflags = 0;
if (!nla)
return -EINVAL;
if (nla_parse_nested(flags, NL80211_MNTR_FLAG_MAX, nla,
mntr_flags_policy, NULL))
return -EINVAL;
for (flag = 1; flag <= NL80211_MNTR_FLAG_MAX; flag++)
if (flags[flag])
*mntrflags |= (1<<flag);
*mntrflags |= MONITOR_FLAG_CHANGED;
return 0;
}
static int nl80211_parse_mon_options(struct cfg80211_registered_device *rdev,
enum nl80211_iftype type,
struct genl_info *info,
struct vif_params *params)
{
bool change = false;
int err;
if (info->attrs[NL80211_ATTR_MNTR_FLAGS]) {
if (type != NL80211_IFTYPE_MONITOR)
return -EINVAL;
err = parse_monitor_flags(info->attrs[NL80211_ATTR_MNTR_FLAGS],
&params->flags);
if (err)
return err;
change = true;
}
if (params->flags & MONITOR_FLAG_ACTIVE &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
if (info->attrs[NL80211_ATTR_MU_MIMO_GROUP_DATA]) {
const u8 *mumimo_groups;
u32 cap_flag = NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER;
if (type != NL80211_IFTYPE_MONITOR)
return -EINVAL;
if (!wiphy_ext_feature_isset(&rdev->wiphy, cap_flag))
return -EOPNOTSUPP;
mumimo_groups =
nla_data(info->attrs[NL80211_ATTR_MU_MIMO_GROUP_DATA]);
/* bits 0 and 63 are reserved and must be zero */
if ((mumimo_groups[0] & BIT(0)) ||
(mumimo_groups[VHT_MUMIMO_GROUPS_DATA_LEN - 1] & BIT(7)))
return -EINVAL;
params->vht_mumimo_groups = mumimo_groups;
change = true;
}
if (info->attrs[NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR]) {
u32 cap_flag = NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER;
if (type != NL80211_IFTYPE_MONITOR)
return -EINVAL;
if (!wiphy_ext_feature_isset(&rdev->wiphy, cap_flag))
return -EOPNOTSUPP;
params->vht_mumimo_follow_addr =
nla_data(info->attrs[NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR]);
change = true;
}
return change ? 1 : 0;
}
static int nl80211_valid_4addr(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u8 use_4addr,
enum nl80211_iftype iftype)
{
if (!use_4addr) {
if (netdev && (netdev->priv_flags & IFF_BRIDGE_PORT))
return -EBUSY;
return 0;
}
switch (iftype) {
case NL80211_IFTYPE_AP_VLAN:
if (rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP)
return 0;
break;
case NL80211_IFTYPE_STATION:
if (rdev->wiphy.flags & WIPHY_FLAG_4ADDR_STATION)
return 0;
break;
default:
break;
}
return -EOPNOTSUPP;
}
static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct vif_params params;
int err;
enum nl80211_iftype otype, ntype;
struct net_device *dev = info->user_ptr[1];
bool change = false;
memset(&params, 0, sizeof(params));
otype = ntype = dev->ieee80211_ptr->iftype;
if (info->attrs[NL80211_ATTR_IFTYPE]) {
ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
if (otype != ntype)
change = true;
if (ntype > NL80211_IFTYPE_MAX)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_MESH_ID]) {
struct wireless_dev *wdev = dev->ieee80211_ptr;
if (ntype != NL80211_IFTYPE_MESH_POINT)
return -EINVAL;
if (netif_running(dev))
return -EBUSY;
wdev_lock(wdev);
BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
IEEE80211_MAX_MESH_ID_LEN);
wdev->mesh_id_up_len =
nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
wdev->mesh_id_up_len);
wdev_unlock(wdev);
}
if (info->attrs[NL80211_ATTR_4ADDR]) {
params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]);
change = true;
err = nl80211_valid_4addr(rdev, dev, params.use_4addr, ntype);
if (err)
return err;
} else {
params.use_4addr = -1;
}
err = nl80211_parse_mon_options(rdev, ntype, info, &params);
if (err < 0)
return err;
if (err > 0)
change = true;
if (change)
err = cfg80211_change_iface(rdev, dev, ntype, &params);
else
err = 0;
if (!err && params.use_4addr != -1)
dev->ieee80211_ptr->use_4addr = params.use_4addr;
return err;
}
static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct vif_params params;
struct wireless_dev *wdev;
struct sk_buff *msg;
int err;
enum nl80211_iftype type = NL80211_IFTYPE_UNSPECIFIED;
/* to avoid failing a new interface creation due to pending removal */
cfg80211_destroy_ifaces(rdev);
memset(&params, 0, sizeof(params));
if (!info->attrs[NL80211_ATTR_IFNAME])
return -EINVAL;
if (info->attrs[NL80211_ATTR_IFTYPE]) {
type = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
if (type > NL80211_IFTYPE_MAX)
return -EINVAL;
}
if (!rdev->ops->add_virtual_intf ||
!(rdev->wiphy.interface_modes & (1 << type)))
return -EOPNOTSUPP;
if ((type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN ||
rdev->wiphy.features & NL80211_FEATURE_MAC_ON_CREATE) &&
info->attrs[NL80211_ATTR_MAC]) {
nla_memcpy(params.macaddr, info->attrs[NL80211_ATTR_MAC],
ETH_ALEN);
if (!is_valid_ether_addr(params.macaddr))
return -EADDRNOTAVAIL;
}
if (info->attrs[NL80211_ATTR_4ADDR]) {
params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]);
err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type);
if (err)
return err;
}
err = nl80211_parse_mon_options(rdev, type, info, &params);
if (err < 0)
return err;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
wdev = rdev_add_virtual_intf(rdev,
nla_data(info->attrs[NL80211_ATTR_IFNAME]),
NET_NAME_USER, type, &params);
if (WARN_ON(!wdev)) {
nlmsg_free(msg);
return -EPROTO;
} else if (IS_ERR(wdev)) {
nlmsg_free(msg);
return PTR_ERR(wdev);
}
if (info->attrs[NL80211_ATTR_SOCKET_OWNER])
wdev->owner_nlportid = info->snd_portid;
switch (type) {
case NL80211_IFTYPE_MESH_POINT:
if (!info->attrs[NL80211_ATTR_MESH_ID])
break;
wdev_lock(wdev);
BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
IEEE80211_MAX_MESH_ID_LEN);
wdev->mesh_id_up_len =
nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
wdev->mesh_id_up_len);
wdev_unlock(wdev);
break;
case NL80211_IFTYPE_NAN:
case NL80211_IFTYPE_P2P_DEVICE:
/*
* P2P Device and NAN do not have a netdev, so don't go
* through the netdev notifier and must be added here
*/
mutex_init(&wdev->mtx);
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->event_lock);
INIT_LIST_HEAD(&wdev->mgmt_registrations);
spin_lock_init(&wdev->mgmt_registrations_lock);
wdev->identifier = ++rdev->wdev_id;
list_add_rcu(&wdev->list, &rdev->wiphy.wdev_list);
rdev->devlist_generation++;
break;
default:
break;
}
if (nl80211_send_iface(msg, info->snd_portid, info->snd_seq, 0,
rdev, wdev, false) < 0) {
nlmsg_free(msg);
return -ENOBUFS;
}
/*
* For wdevs which have no associated netdev object (e.g. of type
* NL80211_IFTYPE_P2P_DEVICE), emit the NEW_INTERFACE event here.
* For all other types, the event will be generated from the
* netdev notifier
*/
if (!wdev->netdev)
nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE);
return genlmsg_reply(msg, info);
}
static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
if (!rdev->ops->del_virtual_intf)
return -EOPNOTSUPP;
/*
* If we remove a wireless device without a netdev then clear
* user_ptr[1] so that nl80211_post_doit won't dereference it
* to check if it needs to do dev_put(). Otherwise it crashes
* since the wdev has been freed, unlike with a netdev where
* we need the dev_put() for the netdev to really be freed.
*/
if (!wdev->netdev)
info->user_ptr[1] = NULL;
return rdev_del_virtual_intf(rdev, wdev);
}
static int nl80211_set_noack_map(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
u16 noack_map;
if (!info->attrs[NL80211_ATTR_NOACK_MAP])
return -EINVAL;
if (!rdev->ops->set_noack_map)
return -EOPNOTSUPP;
noack_map = nla_get_u16(info->attrs[NL80211_ATTR_NOACK_MAP]);
return rdev_set_noack_map(rdev, dev, noack_map);
}
struct get_key_cookie {
struct sk_buff *msg;
int error;
int idx;
};
static void get_key_callback(void *c, struct key_params *params)
{
struct nlattr *key;
struct get_key_cookie *cookie = c;
if ((params->key &&
nla_put(cookie->msg, NL80211_ATTR_KEY_DATA,
params->key_len, params->key)) ||
(params->seq &&
nla_put(cookie->msg, NL80211_ATTR_KEY_SEQ,
params->seq_len, params->seq)) ||
(params->cipher &&
nla_put_u32(cookie->msg, NL80211_ATTR_KEY_CIPHER,
params->cipher)))
goto nla_put_failure;
key = nla_nest_start(cookie->msg, NL80211_ATTR_KEY);
if (!key)
goto nla_put_failure;
if ((params->key &&
nla_put(cookie->msg, NL80211_KEY_DATA,
params->key_len, params->key)) ||
(params->seq &&
nla_put(cookie->msg, NL80211_KEY_SEQ,
params->seq_len, params->seq)) ||
(params->cipher &&
nla_put_u32(cookie->msg, NL80211_KEY_CIPHER,
params->cipher)))
goto nla_put_failure;
if (nla_put_u8(cookie->msg, NL80211_ATTR_KEY_IDX, cookie->idx))
goto nla_put_failure;
nla_nest_end(cookie->msg, key);
return;
nla_put_failure:
cookie->error = 1;
}
static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int err;
struct net_device *dev = info->user_ptr[1];
u8 key_idx = 0;
const u8 *mac_addr = NULL;
bool pairwise;
struct get_key_cookie cookie = {
.error = 0,
};
void *hdr;
struct sk_buff *msg;
if (info->attrs[NL80211_ATTR_KEY_IDX])
key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
if (key_idx > 5)
return -EINVAL;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
pairwise = !!mac_addr;
if (info->attrs[NL80211_ATTR_KEY_TYPE]) {
u32 kt = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]);
if (kt >= NUM_NL80211_KEYTYPES)
return -EINVAL;
if (kt != NL80211_KEYTYPE_GROUP &&
kt != NL80211_KEYTYPE_PAIRWISE)
return -EINVAL;
pairwise = kt == NL80211_KEYTYPE_PAIRWISE;
}
if (!rdev->ops->get_key)
return -EOPNOTSUPP;
if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN))
return -ENOENT;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_NEW_KEY);
if (!hdr)
goto nla_put_failure;
cookie.msg = msg;
cookie.idx = key_idx;
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put_u8(msg, NL80211_ATTR_KEY_IDX, key_idx))
goto nla_put_failure;
if (mac_addr &&
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr))
goto nla_put_failure;
err = rdev_get_key(rdev, dev, key_idx, pairwise, mac_addr, &cookie,
get_key_callback);
if (err)
goto free_msg;
if (cookie.error)
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
err = -ENOBUFS;
free_msg:
nlmsg_free(msg);
return err;
}
static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct key_parse key;
int err;
struct net_device *dev = info->user_ptr[1];
err = nl80211_parse_key(info, &key);
if (err)
return err;
if (key.idx < 0)
return -EINVAL;
/* only support setting default key */
if (!key.def && !key.defmgmt)
return -EINVAL;
wdev_lock(dev->ieee80211_ptr);
if (key.def) {
if (!rdev->ops->set_default_key) {
err = -EOPNOTSUPP;
goto out;
}
err = nl80211_key_allowed(dev->ieee80211_ptr);
if (err)
goto out;
err = rdev_set_default_key(rdev, dev, key.idx,
key.def_uni, key.def_multi);
if (err)
goto out;
#ifdef CONFIG_CFG80211_WEXT
dev->ieee80211_ptr->wext.default_key = key.idx;
#endif
} else {
if (key.def_uni || !key.def_multi) {
err = -EINVAL;
goto out;
}
if (!rdev->ops->set_default_mgmt_key) {
err = -EOPNOTSUPP;
goto out;
}
err = nl80211_key_allowed(dev->ieee80211_ptr);
if (err)
goto out;
err = rdev_set_default_mgmt_key(rdev, dev, key.idx);
if (err)
goto out;
#ifdef CONFIG_CFG80211_WEXT
dev->ieee80211_ptr->wext.default_mgmt_key = key.idx;
#endif
}
out:
wdev_unlock(dev->ieee80211_ptr);
return err;
}
static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int err;
struct net_device *dev = info->user_ptr[1];
struct key_parse key;
const u8 *mac_addr = NULL;
err = nl80211_parse_key(info, &key);
if (err)
return err;
if (!key.p.key)
return -EINVAL;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (key.type == -1) {
if (mac_addr)
key.type = NL80211_KEYTYPE_PAIRWISE;
else
key.type = NL80211_KEYTYPE_GROUP;
}
/* for now */
if (key.type != NL80211_KEYTYPE_PAIRWISE &&
key.type != NL80211_KEYTYPE_GROUP)
return -EINVAL;
if (!rdev->ops->add_key)
return -EOPNOTSUPP;
if (cfg80211_validate_key_settings(rdev, &key.p, key.idx,
key.type == NL80211_KEYTYPE_PAIRWISE,
mac_addr))
return -EINVAL;
wdev_lock(dev->ieee80211_ptr);
err = nl80211_key_allowed(dev->ieee80211_ptr);
if (!err)
err = rdev_add_key(rdev, dev, key.idx,
key.type == NL80211_KEYTYPE_PAIRWISE,
mac_addr, &key.p);
wdev_unlock(dev->ieee80211_ptr);
return err;
}
static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int err;
struct net_device *dev = info->user_ptr[1];
u8 *mac_addr = NULL;
struct key_parse key;
err = nl80211_parse_key(info, &key);
if (err)
return err;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (key.type == -1) {
if (mac_addr)
key.type = NL80211_KEYTYPE_PAIRWISE;
else
key.type = NL80211_KEYTYPE_GROUP;
}
/* for now */
if (key.type != NL80211_KEYTYPE_PAIRWISE &&
key.type != NL80211_KEYTYPE_GROUP)
return -EINVAL;
if (!rdev->ops->del_key)
return -EOPNOTSUPP;
wdev_lock(dev->ieee80211_ptr);
err = nl80211_key_allowed(dev->ieee80211_ptr);
if (key.type == NL80211_KEYTYPE_GROUP && mac_addr &&
!(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN))
err = -ENOENT;
if (!err)
err = rdev_del_key(rdev, dev, key.idx,
key.type == NL80211_KEYTYPE_PAIRWISE,
mac_addr);
#ifdef CONFIG_CFG80211_WEXT
if (!err) {
if (key.idx == dev->ieee80211_ptr->wext.default_key)
dev->ieee80211_ptr->wext.default_key = -1;
else if (key.idx == dev->ieee80211_ptr->wext.default_mgmt_key)
dev->ieee80211_ptr->wext.default_mgmt_key = -1;
}
#endif
wdev_unlock(dev->ieee80211_ptr);
return err;
}
/* This function returns an error or the number of nested attributes */
static int validate_acl_mac_addrs(struct nlattr *nl_attr)
{
struct nlattr *attr;
int n_entries = 0, tmp;
nla_for_each_nested(attr, nl_attr, tmp) {
if (nla_len(attr) != ETH_ALEN)
return -EINVAL;
n_entries++;
}
return n_entries;
}
/*
* This function parses ACL information and allocates memory for ACL data.
* On successful return, the calling function is responsible to free the
* ACL buffer returned by this function.
*/
static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy,
struct genl_info *info)
{
enum nl80211_acl_policy acl_policy;
struct nlattr *attr;
struct cfg80211_acl_data *acl;
int i = 0, n_entries, tmp;
if (!wiphy->max_acl_mac_addrs)
return ERR_PTR(-EOPNOTSUPP);
if (!info->attrs[NL80211_ATTR_ACL_POLICY])
return ERR_PTR(-EINVAL);
acl_policy = nla_get_u32(info->attrs[NL80211_ATTR_ACL_POLICY]);
if (acl_policy != NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED &&
acl_policy != NL80211_ACL_POLICY_DENY_UNLESS_LISTED)
return ERR_PTR(-EINVAL);
if (!info->attrs[NL80211_ATTR_MAC_ADDRS])
return ERR_PTR(-EINVAL);
n_entries = validate_acl_mac_addrs(info->attrs[NL80211_ATTR_MAC_ADDRS]);
if (n_entries < 0)
return ERR_PTR(n_entries);
if (n_entries > wiphy->max_acl_mac_addrs)
return ERR_PTR(-ENOTSUPP);
acl = kzalloc(sizeof(*acl) + (sizeof(struct mac_address) * n_entries),
GFP_KERNEL);
if (!acl)
return ERR_PTR(-ENOMEM);
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_MAC_ADDRS], tmp) {
memcpy(acl->mac_addrs[i].addr, nla_data(attr), ETH_ALEN);
i++;
}
acl->n_acl_entries = n_entries;
acl->acl_policy = acl_policy;
return acl;
}
static int nl80211_set_mac_acl(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct cfg80211_acl_data *acl;
int err;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
if (!dev->ieee80211_ptr->beacon_interval)
return -EINVAL;
acl = parse_acl_data(&rdev->wiphy, info);
if (IS_ERR(acl))
return PTR_ERR(acl);
err = rdev_set_mac_acl(rdev, dev, acl);
kfree(acl);
return err;
}
static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
u8 *rates, u8 rates_len)
{
u8 i;
u32 mask = 0;
for (i = 0; i < rates_len; i++) {
int rate = (rates[i] & 0x7f) * 5;
int ridx;
for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
struct ieee80211_rate *srate =
&sband->bitrates[ridx];
if (rate == srate->bitrate) {
mask |= 1 << ridx;
break;
}
}
if (ridx == sband->n_bitrates)
return 0; /* rate not found */
}
return mask;
}
static bool ht_rateset_to_mask(struct ieee80211_supported_band *sband,
u8 *rates, u8 rates_len,
u8 mcs[IEEE80211_HT_MCS_MASK_LEN])
{
u8 i;
memset(mcs, 0, IEEE80211_HT_MCS_MASK_LEN);
for (i = 0; i < rates_len; i++) {
int ridx, rbit;
ridx = rates[i] / 8;
rbit = BIT(rates[i] % 8);
/* check validity */
if ((ridx < 0) || (ridx >= IEEE80211_HT_MCS_MASK_LEN))
return false;
/* check availability */
if (sband->ht_cap.mcs.rx_mask[ridx] & rbit)
mcs[ridx] |= rbit;
else
return false;
}
return true;
}
static u16 vht_mcs_map_to_mcs_mask(u8 vht_mcs_map)
{
u16 mcs_mask = 0;
switch (vht_mcs_map) {
case IEEE80211_VHT_MCS_NOT_SUPPORTED:
break;
case IEEE80211_VHT_MCS_SUPPORT_0_7:
mcs_mask = 0x00FF;
break;
case IEEE80211_VHT_MCS_SUPPORT_0_8:
mcs_mask = 0x01FF;
break;
case IEEE80211_VHT_MCS_SUPPORT_0_9:
mcs_mask = 0x03FF;
break;
default:
break;
}
return mcs_mask;
}
static void vht_build_mcs_mask(u16 vht_mcs_map,
u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
{
u8 nss;
for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) {
vht_mcs_mask[nss] = vht_mcs_map_to_mcs_mask(vht_mcs_map & 0x03);
vht_mcs_map >>= 2;
}
}
static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
struct nl80211_txrate_vht *txrate,
u16 mcs[NL80211_VHT_NSS_MAX])
{
u16 tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
u16 tx_mcs_mask[NL80211_VHT_NSS_MAX] = {};
u8 i;
if (!sband->vht_cap.vht_supported)
return false;
memset(mcs, 0, sizeof(u16) * NL80211_VHT_NSS_MAX);
/* Build vht_mcs_mask from VHT capabilities */
vht_build_mcs_mask(tx_mcs_map, tx_mcs_mask);
for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
if ((tx_mcs_mask[i] & txrate->mcs[i]) == txrate->mcs[i])
mcs[i] = txrate->mcs[i];
else
return false;
}
return true;
}
static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_RATES },
[NL80211_TXRATE_HT] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_HT_RATES },
[NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
[NL80211_TXRATE_GI] = { .type = NLA_U8 },
};
static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
struct cfg80211_bitrate_mask *mask)
{
struct nlattr *tb[NL80211_TXRATE_MAX + 1];
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int rem, i;
struct nlattr *tx_rates;
struct ieee80211_supported_band *sband;
u16 vht_tx_mcs_map;
memset(mask, 0, sizeof(*mask));
/* Default to all rates enabled */
for (i = 0; i < NUM_NL80211_BANDS; i++) {
sband = rdev->wiphy.bands[i];
if (!sband)
continue;
mask->control[i].legacy = (1 << sband->n_bitrates) - 1;
memcpy(mask->control[i].ht_mcs,
sband->ht_cap.mcs.rx_mask,
sizeof(mask->control[i].ht_mcs));
if (!sband->vht_cap.vht_supported)
continue;
vht_tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
vht_build_mcs_mask(vht_tx_mcs_map, mask->control[i].vht_mcs);
}
/* if no rates are given set it back to the defaults */
if (!info->attrs[NL80211_ATTR_TX_RATES])
goto out;
/* The nested attribute uses enum nl80211_band as the index. This maps
* directly to the enum nl80211_band values used in cfg80211.
*/
BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
enum nl80211_band band = nla_type(tx_rates);
int err;
if (band < 0 || band >= NUM_NL80211_BANDS)
return -EINVAL;
sband = rdev->wiphy.bands[band];
if (sband == NULL)
return -EINVAL;
err = nla_parse_nested(tb, NL80211_TXRATE_MAX, tx_rates,
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_txattr_policy, info->extack);
if (err)
return err;
if (tb[NL80211_TXRATE_LEGACY]) {
mask->control[band].legacy = rateset_to_mask(
sband,
nla_data(tb[NL80211_TXRATE_LEGACY]),
nla_len(tb[NL80211_TXRATE_LEGACY]));
if ((mask->control[band].legacy == 0) &&
nla_len(tb[NL80211_TXRATE_LEGACY]))
return -EINVAL;
}
if (tb[NL80211_TXRATE_HT]) {
if (!ht_rateset_to_mask(
sband,
nla_data(tb[NL80211_TXRATE_HT]),
nla_len(tb[NL80211_TXRATE_HT]),
mask->control[band].ht_mcs))
return -EINVAL;
}
if (tb[NL80211_TXRATE_VHT]) {
if (!vht_set_mcs_mask(
sband,
nla_data(tb[NL80211_TXRATE_VHT]),
mask->control[band].vht_mcs))
return -EINVAL;
}
if (tb[NL80211_TXRATE_GI]) {
mask->control[band].gi =
nla_get_u8(tb[NL80211_TXRATE_GI]);
if (mask->control[band].gi > NL80211_TXRATE_FORCE_LGI)
return -EINVAL;
}
if (mask->control[band].legacy == 0) {
/* don't allow empty legacy rates if HT or VHT
* are not even supported.
*/
if (!(rdev->wiphy.bands[band]->ht_cap.ht_supported ||
rdev->wiphy.bands[band]->vht_cap.vht_supported))
return -EINVAL;
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
if (mask->control[band].ht_mcs[i])
goto out;
for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
if (mask->control[band].vht_mcs[i])
goto out;
/* legacy and mcs rates may not be both empty */
return -EINVAL;
}
}
out:
return 0;
}
static int validate_beacon_tx_rate(struct cfg80211_registered_device *rdev,
enum nl80211_band band,
struct cfg80211_bitrate_mask *beacon_rate)
{
u32 count_ht, count_vht, i;
u32 rate = beacon_rate->control[band].legacy;
/* Allow only one rate */
if (hweight32(rate) > 1)
return -EINVAL;
count_ht = 0;
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
if (hweight8(beacon_rate->control[band].ht_mcs[i]) > 1) {
return -EINVAL;
} else if (beacon_rate->control[band].ht_mcs[i]) {
count_ht++;
if (count_ht > 1)
return -EINVAL;
}
if (count_ht && rate)
return -EINVAL;
}
count_vht = 0;
for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
if (hweight16(beacon_rate->control[band].vht_mcs[i]) > 1) {
return -EINVAL;
} else if (beacon_rate->control[band].vht_mcs[i]) {
count_vht++;
if (count_vht > 1)
return -EINVAL;
}
if (count_vht && rate)
return -EINVAL;
}
if ((count_ht && count_vht) || (!rate && !count_ht && !count_vht))
return -EINVAL;
if (rate &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY))
return -EINVAL;
if (count_ht &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_BEACON_RATE_HT))
return -EINVAL;
if (count_vht &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_BEACON_RATE_VHT))
return -EINVAL;
return 0;
}
static int nl80211_parse_beacon(struct nlattr *attrs[],
struct cfg80211_beacon_data *bcn)
{
bool haveinfo = false;
if (!is_valid_ie_attr(attrs[NL80211_ATTR_BEACON_TAIL]) ||
!is_valid_ie_attr(attrs[NL80211_ATTR_IE]) ||
!is_valid_ie_attr(attrs[NL80211_ATTR_IE_PROBE_RESP]) ||
!is_valid_ie_attr(attrs[NL80211_ATTR_IE_ASSOC_RESP]))
return -EINVAL;
memset(bcn, 0, sizeof(*bcn));
if (attrs[NL80211_ATTR_BEACON_HEAD]) {
bcn->head = nla_data(attrs[NL80211_ATTR_BEACON_HEAD]);
bcn->head_len = nla_len(attrs[NL80211_ATTR_BEACON_HEAD]);
if (!bcn->head_len)
return -EINVAL;
haveinfo = true;
}
if (attrs[NL80211_ATTR_BEACON_TAIL]) {
bcn->tail = nla_data(attrs[NL80211_ATTR_BEACON_TAIL]);
bcn->tail_len = nla_len(attrs[NL80211_ATTR_BEACON_TAIL]);
haveinfo = true;
}
if (!haveinfo)
return -EINVAL;
if (attrs[NL80211_ATTR_IE]) {
bcn->beacon_ies = nla_data(attrs[NL80211_ATTR_IE]);
bcn->beacon_ies_len = nla_len(attrs[NL80211_ATTR_IE]);
}
if (attrs[NL80211_ATTR_IE_PROBE_RESP]) {
bcn->proberesp_ies =
nla_data(attrs[NL80211_ATTR_IE_PROBE_RESP]);
bcn->proberesp_ies_len =
nla_len(attrs[NL80211_ATTR_IE_PROBE_RESP]);
}
if (attrs[NL80211_ATTR_IE_ASSOC_RESP]) {
bcn->assocresp_ies =
nla_data(attrs[NL80211_ATTR_IE_ASSOC_RESP]);
bcn->assocresp_ies_len =
nla_len(attrs[NL80211_ATTR_IE_ASSOC_RESP]);
}
if (attrs[NL80211_ATTR_PROBE_RESP]) {
bcn->probe_resp = nla_data(attrs[NL80211_ATTR_PROBE_RESP]);
bcn->probe_resp_len = nla_len(attrs[NL80211_ATTR_PROBE_RESP]);
}
return 0;
}
static void nl80211_check_ap_rate_selectors(struct cfg80211_ap_settings *params,
const u8 *rates)
{
int i;
if (!rates)
return;
for (i = 0; i < rates[1]; i++) {
if (rates[2 + i] == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
params->ht_required = true;
if (rates[2 + i] == BSS_MEMBERSHIP_SELECTOR_VHT_PHY)
params->vht_required = true;
}
}
/*
* Since the nl80211 API didn't include, from the beginning, attributes about
* HT/VHT requirements/capabilities, we parse them out of the IEs for the
* benefit of drivers that rebuild IEs in the firmware.
*/
static void nl80211_calculate_ap_params(struct cfg80211_ap_settings *params)
{
const struct cfg80211_beacon_data *bcn = &params->beacon;
size_t ies_len = bcn->tail_len;
const u8 *ies = bcn->tail;
const u8 *rates;
const u8 *cap;
rates = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies, ies_len);
nl80211_check_ap_rate_selectors(params, rates);
rates = cfg80211_find_ie(WLAN_EID_EXT_SUPP_RATES, ies, ies_len);
nl80211_check_ap_rate_selectors(params, rates);
cap = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies, ies_len);
if (cap && cap[1] >= sizeof(*params->ht_cap))
params->ht_cap = (void *)(cap + 2);
cap = cfg80211_find_ie(WLAN_EID_VHT_CAPABILITY, ies, ies_len);
if (cap && cap[1] >= sizeof(*params->vht_cap))
params->vht_cap = (void *)(cap + 2);
}
static bool nl80211_get_ap_channel(struct cfg80211_registered_device *rdev,
struct cfg80211_ap_settings *params)
{
struct wireless_dev *wdev;
bool ret = false;
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO)
continue;
if (!wdev->preset_chandef.chan)
continue;
params->chandef = wdev->preset_chandef;
ret = true;
break;
}
return ret;
}
static bool nl80211_valid_auth_type(struct cfg80211_registered_device *rdev,
enum nl80211_auth_type auth_type,
enum nl80211_commands cmd)
{
if (auth_type > NL80211_AUTHTYPE_MAX)
return false;
switch (cmd) {
case NL80211_CMD_AUTHENTICATE:
if (!(rdev->wiphy.features & NL80211_FEATURE_SAE) &&
auth_type == NL80211_AUTHTYPE_SAE)
return false;
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_FILS_STA) &&
(auth_type == NL80211_AUTHTYPE_FILS_SK ||
auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
auth_type == NL80211_AUTHTYPE_FILS_PK))
return false;
return true;
case NL80211_CMD_CONNECT:
/* SAE not supported yet */
if (auth_type == NL80211_AUTHTYPE_SAE)
return false;
if (!(rdev->wiphy.features & NL80211_FEATURE_SAE) &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_SAE_OFFLOAD) &&
auth_type == NL80211_AUTHTYPE_SAE)
return false;
/* FILS with SK PFS or PK not supported yet */
if (auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
auth_type == NL80211_AUTHTYPE_FILS_PK)
return false;
if (!wiphy_ext_feature_isset(
&rdev->wiphy,
NL80211_EXT_FEATURE_FILS_SK_OFFLOAD) &&
auth_type == NL80211_AUTHTYPE_FILS_SK)
return false;
return true;
case NL80211_CMD_START_AP:
/* SAE not supported yet */
if (auth_type == NL80211_AUTHTYPE_SAE)
return false;
/* FILS not supported yet */
if (auth_type == NL80211_AUTHTYPE_FILS_SK ||
auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
auth_type == NL80211_AUTHTYPE_FILS_PK)
return false;
return true;
default:
return false;
}
}
static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_ap_settings params;
int err;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
if (!rdev->ops->start_ap)
return -EOPNOTSUPP;
if (wdev->beacon_interval)
return -EALREADY;
memset(&params, 0, sizeof(params));
/* these are required for START_AP */
if (!info->attrs[NL80211_ATTR_BEACON_INTERVAL] ||
!info->attrs[NL80211_ATTR_DTIM_PERIOD] ||
!info->attrs[NL80211_ATTR_BEACON_HEAD])
return -EINVAL;
err = nl80211_parse_beacon(info->attrs, &params.beacon);
if (err)
return err;
params.beacon_interval =
nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
params.dtim_period =
nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
err = cfg80211_validate_beacon_int(rdev, dev->ieee80211_ptr->iftype,
params.beacon_interval);
if (err)
return err;
/*
* In theory, some of these attributes should be required here
* but since they were not used when the command was originally
* added, keep them optional for old user space programs to let
* them continue to work with drivers that do not need the
* additional information -- drivers must check!
*/
if (info->attrs[NL80211_ATTR_SSID]) {
params.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
params.ssid_len =
nla_len(info->attrs[NL80211_ATTR_SSID]);
if (params.ssid_len == 0 ||
params.ssid_len > IEEE80211_MAX_SSID_LEN)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_HIDDEN_SSID]) {
params.hidden_ssid = nla_get_u32(
info->attrs[NL80211_ATTR_HIDDEN_SSID]);
if (params.hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE &&
params.hidden_ssid != NL80211_HIDDEN_SSID_ZERO_LEN &&
params.hidden_ssid != NL80211_HIDDEN_SSID_ZERO_CONTENTS)
return -EINVAL;
}
params.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
params.auth_type = nla_get_u32(
info->attrs[NL80211_ATTR_AUTH_TYPE]);
if (!nl80211_valid_auth_type(rdev, params.auth_type,
NL80211_CMD_START_AP))
return -EINVAL;
} else
params.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
err = nl80211_crypto_settings(rdev, info, &params.crypto,
NL80211_MAX_NR_CIPHER_SUITES);
if (err)
return err;
if (info->attrs[NL80211_ATTR_INACTIVITY_TIMEOUT]) {
if (!(rdev->wiphy.features & NL80211_FEATURE_INACTIVITY_TIMER))
return -EOPNOTSUPP;
params.inactivity_timeout = nla_get_u16(
info->attrs[NL80211_ATTR_INACTIVITY_TIMEOUT]);
}
if (info->attrs[NL80211_ATTR_P2P_CTWINDOW]) {
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
params.p2p_ctwindow =
nla_get_u8(info->attrs[NL80211_ATTR_P2P_CTWINDOW]);
if (params.p2p_ctwindow > 127)
return -EINVAL;
if (params.p2p_ctwindow != 0 &&
!(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_CTWIN))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_P2P_OPPPS]) {
u8 tmp;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
tmp = nla_get_u8(info->attrs[NL80211_ATTR_P2P_OPPPS]);
if (tmp > 1)
return -EINVAL;
params.p2p_opp_ps = tmp;
if (params.p2p_opp_ps != 0 &&
!(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_OPPPS))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
err = nl80211_parse_chandef(rdev, info, &params.chandef);
if (err)
return err;
} else if (wdev->preset_chandef.chan) {
params.chandef = wdev->preset_chandef;
} else if (!nl80211_get_ap_channel(rdev, &params))
return -EINVAL;
if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &params.chandef,
wdev->iftype))
return -EINVAL;
if (info->attrs[NL80211_ATTR_TX_RATES]) {
err = nl80211_parse_tx_bitrate_mask(info, &params.beacon_rate);
if (err)
return err;
err = validate_beacon_tx_rate(rdev, params.chandef.chan->band,
&params.beacon_rate);
if (err)
return err;
}
if (info->attrs[NL80211_ATTR_SMPS_MODE]) {
params.smps_mode =
nla_get_u8(info->attrs[NL80211_ATTR_SMPS_MODE]);
switch (params.smps_mode) {
case NL80211_SMPS_OFF:
break;
case NL80211_SMPS_STATIC:
if (!(rdev->wiphy.features &
NL80211_FEATURE_STATIC_SMPS))
return -EINVAL;
break;
case NL80211_SMPS_DYNAMIC:
if (!(rdev->wiphy.features &
NL80211_FEATURE_DYNAMIC_SMPS))
return -EINVAL;
break;
default:
return -EINVAL;
}
} else {
params.smps_mode = NL80211_SMPS_OFF;
}
params.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]);
if (params.pbss && !rdev->wiphy.bands[NL80211_BAND_60GHZ])
return -EOPNOTSUPP;
if (info->attrs[NL80211_ATTR_ACL_POLICY]) {
params.acl = parse_acl_data(&rdev->wiphy, info);
if (IS_ERR(params.acl))
return PTR_ERR(params.acl);
}
nl80211_calculate_ap_params(&params);
wdev_lock(wdev);
err = rdev_start_ap(rdev, dev, &params);
if (!err) {
wdev->preset_chandef = params.chandef;
wdev->beacon_interval = params.beacon_interval;
wdev->chandef = params.chandef;
wdev->ssid_len = params.ssid_len;
memcpy(wdev->ssid, params.ssid, wdev->ssid_len);
}
wdev_unlock(wdev);
kfree(params.acl);
return err;
}
static int nl80211_set_beacon(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_beacon_data params;
int err;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
if (!rdev->ops->change_beacon)
return -EOPNOTSUPP;
if (!wdev->beacon_interval)
return -EINVAL;
err = nl80211_parse_beacon(info->attrs, &params);
if (err)
return err;
wdev_lock(wdev);
err = rdev_change_beacon(rdev, dev, &params);
wdev_unlock(wdev);
return err;
}
static int nl80211_stop_ap(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
return cfg80211_stop_ap(rdev, dev, false);
}
static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
[NL80211_STA_FLAG_AUTHORIZED] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_SHORT_PREAMBLE] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_WME] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_AUTHENTICATED] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_TDLS_PEER] = { .type = NLA_FLAG },
};
static int parse_station_flags(struct genl_info *info,
enum nl80211_iftype iftype,
struct station_parameters *params)
{
struct nlattr *flags[NL80211_STA_FLAG_MAX + 1];
struct nlattr *nla;
int flag;
/*
* Try parsing the new attribute first so userspace
* can specify both for older kernels.
*/
nla = info->attrs[NL80211_ATTR_STA_FLAGS2];
if (nla) {
struct nl80211_sta_flag_update *sta_flags;
sta_flags = nla_data(nla);
params->sta_flags_mask = sta_flags->mask;
params->sta_flags_set = sta_flags->set;
params->sta_flags_set &= params->sta_flags_mask;
if ((params->sta_flags_mask |
params->sta_flags_set) & BIT(__NL80211_STA_FLAG_INVALID))
return -EINVAL;
return 0;
}
/* if present, parse the old attribute */
nla = info->attrs[NL80211_ATTR_STA_FLAGS];
if (!nla)
return 0;
if (nla_parse_nested(flags, NL80211_STA_FLAG_MAX, nla,
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
sta_flags_policy, info->extack))
return -EINVAL;
/*
* Only allow certain flags for interface types so that
* other attributes are silently ignored. Remember that
* this is backward compatibility code with old userspace
* and shouldn't be hit in other cases anyway.
*/
switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHORIZED) |
BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
BIT(NL80211_STA_FLAG_WME) |
BIT(NL80211_STA_FLAG_MFP);
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHORIZED) |
BIT(NL80211_STA_FLAG_TDLS_PEER);
break;
case NL80211_IFTYPE_MESH_POINT:
params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_MFP) |
BIT(NL80211_STA_FLAG_AUTHORIZED);
break;
default:
return -EINVAL;
}
for (flag = 1; flag <= NL80211_STA_FLAG_MAX; flag++) {
if (flags[flag]) {
params->sta_flags_set |= (1<<flag);
/* no longer support new API additions in old API */
if (flag > NL80211_STA_FLAG_MAX_OLD_API)
return -EINVAL;
}
}
return 0;
}
static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info,
int attr)
{
struct nlattr *rate;
u32 bitrate;
u16 bitrate_compat;
enum nl80211_rate_info rate_flg;
rate = nla_nest_start(msg, attr);
if (!rate)
return false;
/* cfg80211_calculate_bitrate will return 0 for mcs >= 32 */
bitrate = cfg80211_calculate_bitrate(info);
/* report 16-bit bitrate only if we can */
bitrate_compat = bitrate < (1UL << 16) ? bitrate : 0;
if (bitrate > 0 &&
nla_put_u32(msg, NL80211_RATE_INFO_BITRATE32, bitrate))
return false;
if (bitrate_compat > 0 &&
nla_put_u16(msg, NL80211_RATE_INFO_BITRATE, bitrate_compat))
return false;
switch (info->bw) {
case RATE_INFO_BW_5:
rate_flg = NL80211_RATE_INFO_5_MHZ_WIDTH;
break;
case RATE_INFO_BW_10:
rate_flg = NL80211_RATE_INFO_10_MHZ_WIDTH;
break;
default:
WARN_ON(1);
/* fall through */
case RATE_INFO_BW_20:
rate_flg = 0;
break;
case RATE_INFO_BW_40:
rate_flg = NL80211_RATE_INFO_40_MHZ_WIDTH;
break;
case RATE_INFO_BW_80:
rate_flg = NL80211_RATE_INFO_80_MHZ_WIDTH;
break;
case RATE_INFO_BW_160:
rate_flg = NL80211_RATE_INFO_160_MHZ_WIDTH;
break;
}
if (rate_flg && nla_put_flag(msg, rate_flg))
return false;
if (info->flags & RATE_INFO_FLAGS_MCS) {
if (nla_put_u8(msg, NL80211_RATE_INFO_MCS, info->mcs))
return false;
if (info->flags & RATE_INFO_FLAGS_SHORT_GI &&
nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI))
return false;
} else if (info->flags & RATE_INFO_FLAGS_VHT_MCS) {
if (nla_put_u8(msg, NL80211_RATE_INFO_VHT_MCS, info->mcs))
return false;
if (nla_put_u8(msg, NL80211_RATE_INFO_VHT_NSS, info->nss))
return false;
if (info->flags & RATE_INFO_FLAGS_SHORT_GI &&
nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI))
return false;
}
nla_nest_end(msg, rate);
return true;
}
static bool nl80211_put_signal(struct sk_buff *msg, u8 mask, s8 *signal,
int id)
{
void *attr;
int i = 0;
if (!mask)
return true;
attr = nla_nest_start(msg, id);
if (!attr)
return false;
for (i = 0; i < IEEE80211_MAX_CHAINS; i++) {
if (!(mask & BIT(i)))
continue;
if (nla_put_u8(msg, i, signal[i]))
return false;
}
nla_nest_end(msg, attr);
return true;
}
static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
u32 seq, int flags,
struct cfg80211_registered_device *rdev,
struct net_device *dev,
const u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
struct nlattr *sinfoattr, *bss_param;
hdr = nl80211hdr_put(msg, portid, seq, flags, cmd);
if (!hdr)
return -1;
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr) ||
nla_put_u32(msg, NL80211_ATTR_GENERATION, sinfo->generation))
goto nla_put_failure;
sinfoattr = nla_nest_start(msg, NL80211_ATTR_STA_INFO);
if (!sinfoattr)
goto nla_put_failure;
#define PUT_SINFO(attr, memb, type) do { \
BUILD_BUG_ON(sizeof(type) == sizeof(u64)); \
if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \
nla_put_ ## type(msg, NL80211_STA_INFO_ ## attr, \
sinfo->memb)) \
goto nla_put_failure; \
} while (0)
#define PUT_SINFO_U64(attr, memb) do { \
if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \
nla_put_u64_64bit(msg, NL80211_STA_INFO_ ## attr, \
sinfo->memb, NL80211_STA_INFO_PAD)) \
goto nla_put_failure; \
} while (0)
PUT_SINFO(CONNECTED_TIME, connected_time, u32);
PUT_SINFO(INACTIVE_TIME, inactive_time, u32);
if (sinfo->filled & (BIT(NL80211_STA_INFO_RX_BYTES) |
BIT(NL80211_STA_INFO_RX_BYTES64)) &&
nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES,
(u32)sinfo->rx_bytes))
goto nla_put_failure;
if (sinfo->filled & (BIT(NL80211_STA_INFO_TX_BYTES) |
BIT(NL80211_STA_INFO_TX_BYTES64)) &&
nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES,
(u32)sinfo->tx_bytes))
goto nla_put_failure;
PUT_SINFO_U64(RX_BYTES64, rx_bytes);
PUT_SINFO_U64(TX_BYTES64, tx_bytes);
PUT_SINFO(LLID, llid, u16);
PUT_SINFO(PLID, plid, u16);
PUT_SINFO(PLINK_STATE, plink_state, u8);
PUT_SINFO_U64(RX_DURATION, rx_duration);
switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
PUT_SINFO(SIGNAL, signal, u8);
PUT_SINFO(SIGNAL_AVG, signal_avg, u8);
break;
default:
break;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_CHAIN_SIGNAL)) {
if (!nl80211_put_signal(msg, sinfo->chains,
sinfo->chain_signal,
NL80211_STA_INFO_CHAIN_SIGNAL))
goto nla_put_failure;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)) {
if (!nl80211_put_signal(msg, sinfo->chains,
sinfo->chain_signal_avg,
NL80211_STA_INFO_CHAIN_SIGNAL_AVG))
goto nla_put_failure;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_TX_BITRATE)) {
if (!nl80211_put_sta_rate(msg, &sinfo->txrate,
NL80211_STA_INFO_TX_BITRATE))
goto nla_put_failure;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_RX_BITRATE)) {
if (!nl80211_put_sta_rate(msg, &sinfo->rxrate,
NL80211_STA_INFO_RX_BITRATE))
goto nla_put_failure;
}
PUT_SINFO(RX_PACKETS, rx_packets, u32);
PUT_SINFO(TX_PACKETS, tx_packets, u32);
PUT_SINFO(TX_RETRIES, tx_retries, u32);
PUT_SINFO(TX_FAILED, tx_failed, u32);
PUT_SINFO(EXPECTED_THROUGHPUT, expected_throughput, u32);
PUT_SINFO(BEACON_LOSS, beacon_loss_count, u32);
PUT_SINFO(LOCAL_PM, local_pm, u32);
PUT_SINFO(PEER_PM, peer_pm, u32);
PUT_SINFO(NONPEER_PM, nonpeer_pm, u32);
if (sinfo->filled & BIT(NL80211_STA_INFO_BSS_PARAM)) {
bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM);
if (!bss_param)
goto nla_put_failure;
if (((sinfo->bss_param.flags & BSS_PARAM_FLAGS_CTS_PROT) &&
nla_put_flag(msg, NL80211_STA_BSS_PARAM_CTS_PROT)) ||
((sinfo->bss_param.flags & BSS_PARAM_FLAGS_SHORT_PREAMBLE) &&
nla_put_flag(msg, NL80211_STA_BSS_PARAM_SHORT_PREAMBLE)) ||
((sinfo->bss_param.flags & BSS_PARAM_FLAGS_SHORT_SLOT_TIME) &&
nla_put_flag(msg, NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME)) ||
nla_put_u8(msg, NL80211_STA_BSS_PARAM_DTIM_PERIOD,
sinfo->bss_param.dtim_period) ||
nla_put_u16(msg, NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
sinfo->bss_param.beacon_interval))
goto nla_put_failure;
nla_nest_end(msg, bss_param);
}
if ((sinfo->filled & BIT(NL80211_STA_INFO_STA_FLAGS)) &&
nla_put(msg, NL80211_STA_INFO_STA_FLAGS,
sizeof(struct nl80211_sta_flag_update),
&sinfo->sta_flags))
goto nla_put_failure;
PUT_SINFO_U64(T_OFFSET, t_offset);
PUT_SINFO_U64(RX_DROP_MISC, rx_dropped_misc);
PUT_SINFO_U64(BEACON_RX, rx_beacon);
PUT_SINFO(BEACON_SIGNAL_AVG, rx_beacon_signal_avg, u8);
#undef PUT_SINFO
#undef PUT_SINFO_U64
if (sinfo->filled & BIT(NL80211_STA_INFO_TID_STATS)) {
struct nlattr *tidsattr;
int tid;
tidsattr = nla_nest_start(msg, NL80211_STA_INFO_TID_STATS);
if (!tidsattr)
goto nla_put_failure;
for (tid = 0; tid < IEEE80211_NUM_TIDS + 1; tid++) {
struct cfg80211_tid_stats *tidstats;
struct nlattr *tidattr;
tidstats = &sinfo->pertid[tid];
if (!tidstats->filled)
continue;
tidattr = nla_nest_start(msg, tid + 1);
if (!tidattr)
goto nla_put_failure;
#define PUT_TIDVAL_U64(attr, memb) do { \
if (tidstats->filled & BIT(NL80211_TID_STATS_ ## attr) && \
nla_put_u64_64bit(msg, NL80211_TID_STATS_ ## attr, \
tidstats->memb, NL80211_TID_STATS_PAD)) \
goto nla_put_failure; \
} while (0)
PUT_TIDVAL_U64(RX_MSDU, rx_msdu);
PUT_TIDVAL_U64(TX_MSDU, tx_msdu);
PUT_TIDVAL_U64(TX_MSDU_RETRIES, tx_msdu_retries);
PUT_TIDVAL_U64(TX_MSDU_FAILED, tx_msdu_failed);
#undef PUT_TIDVAL_U64
nla_nest_end(msg, tidattr);
}
nla_nest_end(msg, tidsattr);
}
nla_nest_end(msg, sinfoattr);
if (sinfo->assoc_req_ies_len &&
nla_put(msg, NL80211_ATTR_IE, sinfo->assoc_req_ies_len,
sinfo->assoc_req_ies))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_station(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct station_info sinfo;
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
u8 mac_addr[ETH_ALEN];
int sta_idx = cb->args[2];
int err;
rtnl_lock();
err = nl80211_prepare_wdev_dump(skb, cb, &rdev, &wdev);
if (err)
goto out_err;
if (!wdev->netdev) {
err = -EINVAL;
goto out_err;
}
if (!rdev->ops->dump_station) {
err = -EOPNOTSUPP;
goto out_err;
}
while (1) {
memset(&sinfo, 0, sizeof(sinfo));
err = rdev_dump_station(rdev, wdev->netdev, sta_idx,
mac_addr, &sinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err;
if (nl80211_send_station(skb, NL80211_CMD_NEW_STATION,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
rdev, wdev->netdev, mac_addr,
&sinfo) < 0)
goto out;
sta_idx++;
}
out:
cb->args[2] = sta_idx;
err = skb->len;
out_err:
rtnl_unlock();
return err;
}
static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct station_info sinfo;
struct sk_buff *msg;
u8 *mac_addr = NULL;
int err;
memset(&sinfo, 0, sizeof(sinfo));
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (!rdev->ops->get_station)
return -EOPNOTSUPP;
err = rdev_get_station(rdev, dev, mac_addr, &sinfo);
if (err)
return err;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
if (nl80211_send_station(msg, NL80211_CMD_NEW_STATION,
info->snd_portid, info->snd_seq, 0,
rdev, dev, mac_addr, &sinfo) < 0) {
nlmsg_free(msg);
return -ENOBUFS;
}
return genlmsg_reply(msg, info);
}
int cfg80211_check_station_change(struct wiphy *wiphy,
struct station_parameters *params,
enum cfg80211_station_type statype)
{
if (params->listen_interval != -1 &&
statype != CFG80211_STA_AP_CLIENT_UNASSOC)
return -EINVAL;
if (params->support_p2p_ps != -1 &&
statype != CFG80211_STA_AP_CLIENT_UNASSOC)
return -EINVAL;
if (params->aid &&
!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) &&
statype != CFG80211_STA_AP_CLIENT_UNASSOC)
return -EINVAL;
/* When you run into this, adjust the code below for the new flag */
BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 7);
switch (statype) {
case CFG80211_STA_MESH_PEER_KERNEL:
case CFG80211_STA_MESH_PEER_USER:
/*
* No ignoring the TDLS flag here -- the userspace mesh
* code doesn't have the bug of including TDLS in the
* mask everywhere.
*/
if (params->sta_flags_mask &
~(BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_MFP) |
BIT(NL80211_STA_FLAG_AUTHORIZED)))
return -EINVAL;
break;
case CFG80211_STA_TDLS_PEER_SETUP:
case CFG80211_STA_TDLS_PEER_ACTIVE:
if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
return -EINVAL;
/* ignore since it can't change */
params->sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
break;
default:
/* disallow mesh-specific things */
if (params->plink_action != NL80211_PLINK_ACTION_NO_ACTION)
return -EINVAL;
if (params->local_pm)
return -EINVAL;
if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE)
return -EINVAL;
}
if (statype != CFG80211_STA_TDLS_PEER_SETUP &&
statype != CFG80211_STA_TDLS_PEER_ACTIVE) {
/* TDLS can't be set, ... */
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
return -EINVAL;
/*
* ... but don't bother the driver with it. This works around
* a hostapd/wpa_supplicant issue -- it always includes the
* TLDS_PEER flag in the mask even for AP mode.
*/
params->sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
}
if (statype != CFG80211_STA_TDLS_PEER_SETUP &&
statype != CFG80211_STA_AP_CLIENT_UNASSOC) {
/* reject other things that can't change */
if (params->sta_modify_mask & STATION_PARAM_APPLY_UAPSD)
return -EINVAL;
if (params->sta_modify_mask & STATION_PARAM_APPLY_CAPABILITY)
return -EINVAL;
if (params->supported_rates)
return -EINVAL;
if (params->ext_capab || params->ht_capa || params->vht_capa)
return -EINVAL;
}
if (statype != CFG80211_STA_AP_CLIENT &&
statype != CFG80211_STA_AP_CLIENT_UNASSOC) {
if (params->vlan)
return -EINVAL;
}
switch (statype) {
case CFG80211_STA_AP_MLME_CLIENT:
/* Use this only for authorizing/unauthorizing a station */
if (!(params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)))
return -EOPNOTSUPP;
break;
case CFG80211_STA_AP_CLIENT:
case CFG80211_STA_AP_CLIENT_UNASSOC:
/* accept only the listed bits */
if (params->sta_flags_mask &
~(BIT(NL80211_STA_FLAG_AUTHORIZED) |
BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_ASSOCIATED) |
BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
BIT(NL80211_STA_FLAG_WME) |
BIT(NL80211_STA_FLAG_MFP)))
return -EINVAL;
/* but authenticated/associated only if driver handles it */
if (!(wiphy->features & NL80211_FEATURE_FULL_AP_CLIENT_STATE) &&
params->sta_flags_mask &
(BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_ASSOCIATED)))
return -EINVAL;
break;
case CFG80211_STA_IBSS:
case CFG80211_STA_AP_STA:
/* reject any changes other than AUTHORIZED */
if (params->sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
return -EINVAL;
break;
case CFG80211_STA_TDLS_PEER_SETUP:
/* reject any changes other than AUTHORIZED or WME */
if (params->sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) |
BIT(NL80211_STA_FLAG_WME)))
return -EINVAL;
/* force (at least) rates when authorizing */
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_AUTHORIZED) &&
!params->supported_rates)
return -EINVAL;
break;
case CFG80211_STA_TDLS_PEER_ACTIVE:
/* reject any changes */
return -EINVAL;
case CFG80211_STA_MESH_PEER_KERNEL:
if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE)
return -EINVAL;
break;
case CFG80211_STA_MESH_PEER_USER:
if (params->plink_action != NL80211_PLINK_ACTION_NO_ACTION &&
params->plink_action != NL80211_PLINK_ACTION_BLOCK)
return -EINVAL;
break;
}
/*
* Older kernel versions ignored this attribute entirely, so don't
* reject attempts to update it but mark it as unused instead so the
* driver won't look at the data.
*/
if (statype != CFG80211_STA_AP_CLIENT_UNASSOC &&
statype != CFG80211_STA_TDLS_PEER_SETUP)
params->opmode_notif_used = false;
return 0;
}
EXPORT_SYMBOL(cfg80211_check_station_change);
/*
* Get vlan interface making sure it is running and on the right wiphy.
*/
static struct net_device *get_vlan(struct genl_info *info,
struct cfg80211_registered_device *rdev)
{
struct nlattr *vlanattr = info->attrs[NL80211_ATTR_STA_VLAN];
struct net_device *v;
int ret;
if (!vlanattr)
return NULL;
v = dev_get_by_index(genl_info_net(info), nla_get_u32(vlanattr));
if (!v)
return ERR_PTR(-ENODEV);
if (!v->ieee80211_ptr || v->ieee80211_ptr->wiphy != &rdev->wiphy) {
ret = -EINVAL;
goto error;
}
if (v->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
v->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
v->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
ret = -EINVAL;
goto error;
}
if (!netif_running(v)) {
ret = -ENETDOWN;
goto error;
}
return v;
error:
dev_put(v);
return ERR_PTR(ret);
}
static const struct nla_policy
nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] = {
[NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 },
[NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 },
};
static int nl80211_parse_sta_wme(struct genl_info *info,
struct station_parameters *params)
{
struct nlattr *tb[NL80211_STA_WME_MAX + 1];
struct nlattr *nla;
int err;
/* parse WME attributes if present */
if (!info->attrs[NL80211_ATTR_STA_WME])
return 0;
nla = info->attrs[NL80211_ATTR_STA_WME];
err = nla_parse_nested(tb, NL80211_STA_WME_MAX, nla,
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_sta_wme_policy, info->extack);
if (err)
return err;
if (tb[NL80211_STA_WME_UAPSD_QUEUES])
params->uapsd_queues = nla_get_u8(
tb[NL80211_STA_WME_UAPSD_QUEUES]);
if (params->uapsd_queues & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
return -EINVAL;
if (tb[NL80211_STA_WME_MAX_SP])
params->max_sp = nla_get_u8(tb[NL80211_STA_WME_MAX_SP]);
if (params->max_sp & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK)
return -EINVAL;
params->sta_modify_mask |= STATION_PARAM_APPLY_UAPSD;
return 0;
}
static int nl80211_parse_sta_channel_info(struct genl_info *info,
struct station_parameters *params)
{
if (info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]) {
params->supported_channels =
nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
params->supported_channels_len =
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
/*
* Need to include at least one (first channel, number of
* channels) tuple for each subband, and must have proper
* tuples for the rest of the data as well.
*/
if (params->supported_channels_len < 2)
return -EINVAL;
if (params->supported_channels_len % 2)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]) {
params->supported_oper_classes =
nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
params->supported_oper_classes_len =
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
/*
* The value of the Length field of the Supported Operating
* Classes element is between 2 and 253.
*/
if (params->supported_oper_classes_len < 2 ||
params->supported_oper_classes_len > 253)
return -EINVAL;
}
return 0;
}
static int nl80211_set_station_tdls(struct genl_info *info,
struct station_parameters *params)
{
int err;
/* Dummy STA entry gets updated once the peer capabilities are known */
if (info->attrs[NL80211_ATTR_PEER_AID])
params->aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params->ht_capa =
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
if (info->attrs[NL80211_ATTR_VHT_CAPABILITY])
params->vht_capa =
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
err = nl80211_parse_sta_channel_info(info, params);
if (err)
return err;
return nl80211_parse_sta_wme(info, params);
}
static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct station_parameters params;
u8 *mac_addr;
int err;
memset(&params, 0, sizeof(params));
if (!rdev->ops->change_station)
return -EOPNOTSUPP;
/*
* AID and listen_interval properties can be set only for unassociated
* station. Include these parameters here and will check them in
* cfg80211_check_station_change().
*/
if (info->attrs[NL80211_ATTR_STA_AID])
params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
else
params.listen_interval = -1;
if (info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]) {
u8 tmp;
tmp = nla_get_u8(info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]);
if (tmp >= NUM_NL80211_P2P_PS_STATUS)
return -EINVAL;
params.support_p2p_ps = tmp;
} else {
params.support_p2p_ps = -1;
}
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]) {
params.supported_rates =
nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.supported_rates_len =
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
}
if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) {
params.capability =
nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]);
params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY;
}
if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) {
params.ext_capab =
nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
params.ext_capab_len =
nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
}
if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
return -EINVAL;
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION]) {
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
if (params.plink_action >= NUM_NL80211_PLINK_ACTIONS)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_STA_PLINK_STATE]) {
params.plink_state =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
if (params.plink_state >= NUM_NL80211_PLINK_STATES)
return -EINVAL;
if (info->attrs[NL80211_ATTR_MESH_PEER_AID]) {
params.peer_aid = nla_get_u16(
info->attrs[NL80211_ATTR_MESH_PEER_AID]);
if (params.peer_aid > IEEE80211_MAX_AID)
return -EINVAL;
}
params.sta_modify_mask |= STATION_PARAM_APPLY_PLINK_STATE;
}
if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) {
enum nl80211_mesh_power_mode pm = nla_get_u32(
info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]);
if (pm <= NL80211_MESH_POWER_UNKNOWN ||
pm > NL80211_MESH_POWER_MAX)
return -EINVAL;
params.local_pm = pm;
}
if (info->attrs[NL80211_ATTR_OPMODE_NOTIF]) {
params.opmode_notif_used = true;
params.opmode_notif =
nla_get_u8(info->attrs[NL80211_ATTR_OPMODE_NOTIF]);
}
/* Include parameters for TDLS peer (will check later) */
err = nl80211_set_station_tdls(info, &params);
if (err)
return err;
params.vlan = get_vlan(info, rdev);
if (IS_ERR(params.vlan))
return PTR_ERR(params.vlan);
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
break;
default:
err = -EOPNOTSUPP;
goto out_put_vlan;
}
/* driver will call cfg80211_check_station_change() */
err = rdev_change_station(rdev, dev, mac_addr, &params);
out_put_vlan:
if (params.vlan)
dev_put(params.vlan);
return err;
}
static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int err;
struct net_device *dev = info->user_ptr[1];
struct station_parameters params;
u8 *mac_addr = NULL;
u32 auth_assoc = BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_ASSOCIATED);
memset(&params, 0, sizeof(params));
if (!rdev->ops->add_station)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_STA_AID] &&
!info->attrs[NL80211_ATTR_PEER_AID])
return -EINVAL;
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
params.supported_rates =
nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.supported_rates_len =
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
if (info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]) {
u8 tmp;
tmp = nla_get_u8(info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]);
if (tmp >= NUM_NL80211_P2P_PS_STATUS)
return -EINVAL;
params.support_p2p_ps = tmp;
} else {
/*
* if not specified, assume it's supported for P2P GO interface,
* and is NOT supported for AP interface
*/
params.support_p2p_ps =
dev->ieee80211_ptr->iftype == NL80211_IFTYPE_P2P_GO;
}
if (info->attrs[NL80211_ATTR_PEER_AID])
params.aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
else
params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
if (!params.aid || params.aid > IEEE80211_MAX_AID)
return -EINVAL;
if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) {
params.capability =
nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]);
params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY;
}
if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) {
params.ext_capab =
nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
params.ext_capab_len =
nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
}
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params.ht_capa =
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
if (info->attrs[NL80211_ATTR_VHT_CAPABILITY])
params.vht_capa =
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
if (info->attrs[NL80211_ATTR_OPMODE_NOTIF]) {
params.opmode_notif_used = true;
params.opmode_notif =
nla_get_u8(info->attrs[NL80211_ATTR_OPMODE_NOTIF]);
}
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION]) {
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
if (params.plink_action >= NUM_NL80211_PLINK_ACTIONS)
return -EINVAL;
}
err = nl80211_parse_sta_channel_info(info, &params);
if (err)
return err;
err = nl80211_parse_sta_wme(info, &params);
if (err)
return err;
if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
return -EINVAL;
/* HT/VHT requires QoS, but if we don't have that just ignore HT/VHT
* as userspace might just pass through the capabilities from the IEs
* directly, rather than enforcing this restriction and returning an
* error in this case.
*/
if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_WME))) {
params.ht_capa = NULL;
params.vht_capa = NULL;
}
/* When you run into this, adjust the code below for the new flag */
BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 7);
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
/* ignore WME attributes if iface/sta is not capable */
if (!(rdev->wiphy.flags & WIPHY_FLAG_AP_UAPSD) ||
!(params.sta_flags_set & BIT(NL80211_STA_FLAG_WME)))
params.sta_modify_mask &= ~STATION_PARAM_APPLY_UAPSD;
/* TDLS peers cannot be added */
if ((params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) ||
info->attrs[NL80211_ATTR_PEER_AID])
return -EINVAL;
/* but don't bother the driver with it */
params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
/* allow authenticated/associated only if driver handles it */
if (!(rdev->wiphy.features &
NL80211_FEATURE_FULL_AP_CLIENT_STATE) &&
params.sta_flags_mask & auth_assoc)
return -EINVAL;
/* Older userspace, or userspace wanting to be compatible with
* !NL80211_FEATURE_FULL_AP_CLIENT_STATE, will not set the auth
* and assoc flags in the mask, but assumes the station will be
* added as associated anyway since this was the required driver
* behaviour before NL80211_FEATURE_FULL_AP_CLIENT_STATE was
* introduced.
* In order to not bother drivers with this quirk in the API
* set the flags in both the mask and set for new stations in
* this case.
*/
if (!(params.sta_flags_mask & auth_assoc)) {
params.sta_flags_mask |= auth_assoc;
params.sta_flags_set |= auth_assoc;
}
/* must be last in here for error handling */
params.vlan = get_vlan(info, rdev);
if (IS_ERR(params.vlan))
return PTR_ERR(params.vlan);
break;
case NL80211_IFTYPE_MESH_POINT:
/* ignore uAPSD data */
params.sta_modify_mask &= ~STATION_PARAM_APPLY_UAPSD;
/* associated is disallowed */
if (params.sta_flags_mask & BIT(NL80211_STA_FLAG_ASSOCIATED))
return -EINVAL;
/* TDLS peers cannot be added */
if ((params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) ||
info->attrs[NL80211_ATTR_PEER_AID])
return -EINVAL;
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
/* ignore uAPSD data */
params.sta_modify_mask &= ~STATION_PARAM_APPLY_UAPSD;
/* these are disallowed */
if (params.sta_flags_mask &
(BIT(NL80211_STA_FLAG_ASSOCIATED) |
BIT(NL80211_STA_FLAG_AUTHENTICATED)))
return -EINVAL;
/* Only TDLS peers can be added */
if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
return -EINVAL;
/* Can only add if TDLS ... */
if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS))
return -EOPNOTSUPP;
/* ... with external setup is supported */
if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP))
return -EOPNOTSUPP;
/*
* Older wpa_supplicant versions always mark the TDLS peer
* as authorized, but it shouldn't yet be.
*/
params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_AUTHORIZED);
break;
default:
return -EOPNOTSUPP;
}
/* be aware of params.vlan when changing code here */
err = rdev_add_station(rdev, dev, mac_addr, &params);
if (params.vlan)
dev_put(params.vlan);
return err;
}
static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct station_del_parameters params;
memset(&params, 0, sizeof(params));
if (info->attrs[NL80211_ATTR_MAC])
params.mac = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
if (!rdev->ops->del_station)
return -EOPNOTSUPP;
if (info->attrs[NL80211_ATTR_MGMT_SUBTYPE]) {
params.subtype =
nla_get_u8(info->attrs[NL80211_ATTR_MGMT_SUBTYPE]);
if (params.subtype != IEEE80211_STYPE_DISASSOC >> 4 &&
params.subtype != IEEE80211_STYPE_DEAUTH >> 4)
return -EINVAL;
} else {
/* Default to Deauthentication frame */
params.subtype = IEEE80211_STYPE_DEAUTH >> 4;
}
if (info->attrs[NL80211_ATTR_REASON_CODE]) {
params.reason_code =
nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (params.reason_code == 0)
return -EINVAL; /* 0 is reserved */
} else {
/* Default to reason code 2 */
params.reason_code = WLAN_REASON_PREV_AUTH_NOT_VALID;
}
return rdev_del_station(rdev, dev, &params);
}
static int nl80211_send_mpath(struct sk_buff *msg, u32 portid, u32 seq,
int flags, struct net_device *dev,
u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
void *hdr;
struct nlattr *pinfoattr;
hdr = nl80211hdr_put(msg, portid, seq, flags, NL80211_CMD_NEW_MPATH);
if (!hdr)
return -1;
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, dst) ||
nla_put(msg, NL80211_ATTR_MPATH_NEXT_HOP, ETH_ALEN, next_hop) ||
nla_put_u32(msg, NL80211_ATTR_GENERATION, pinfo->generation))
goto nla_put_failure;
pinfoattr = nla_nest_start(msg, NL80211_ATTR_MPATH_INFO);
if (!pinfoattr)
goto nla_put_failure;
if ((pinfo->filled & MPATH_INFO_FRAME_QLEN) &&
nla_put_u32(msg, NL80211_MPATH_INFO_FRAME_QLEN,
pinfo->frame_qlen))
goto nla_put_failure;
if (((pinfo->filled & MPATH_INFO_SN) &&
nla_put_u32(msg, NL80211_MPATH_INFO_SN, pinfo->sn)) ||
((pinfo->filled & MPATH_INFO_METRIC) &&
nla_put_u32(msg, NL80211_MPATH_INFO_METRIC,
pinfo->metric)) ||
((pinfo->filled & MPATH_INFO_EXPTIME) &&
nla_put_u32(msg, NL80211_MPATH_INFO_EXPTIME,
pinfo->exptime)) ||
((pinfo->filled & MPATH_INFO_FLAGS) &&
nla_put_u8(msg, NL80211_MPATH_INFO_FLAGS,
pinfo->flags)) ||
((pinfo->filled & MPATH_INFO_DISCOVERY_TIMEOUT) &&
nla_put_u32(msg, NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
pinfo->discovery_timeout)) ||
((pinfo->filled & MPATH_INFO_DISCOVERY_RETRIES) &&
nla_put_u8(msg, NL80211_MPATH_INFO_DISCOVERY_RETRIES,
pinfo->discovery_retries)))
goto nla_put_failure;
nla_nest_end(msg, pinfoattr);
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_mpath(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct mpath_info pinfo;
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
u8 dst[ETH_ALEN];
u8 next_hop[ETH_ALEN];
int path_idx = cb->args[2];
int err;
rtnl_lock();
err = nl80211_prepare_wdev_dump(skb, cb, &rdev, &wdev);
if (err)
goto out_err;
if (!rdev->ops->dump_mpath) {
err = -EOPNOTSUPP;
goto out_err;
}
if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
goto out_err;
}
while (1) {
err = rdev_dump_mpath(rdev, wdev->netdev, path_idx, dst,
next_hop, &pinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err;
if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
wdev->netdev, dst, next_hop,
&pinfo) < 0)
goto out;
path_idx++;
}
out:
cb->args[2] = path_idx;
err = skb->len;
out_err:
rtnl_unlock();
return err;
}
static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int err;
struct net_device *dev = info->user_ptr[1];
struct mpath_info pinfo;
struct sk_buff *msg;
u8 *dst = NULL;
u8 next_hop[ETH_ALEN];
memset(&pinfo, 0, sizeof(pinfo));
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (!rdev->ops->get_mpath)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
err = rdev_get_mpath(rdev, dev, dst, next_hop, &pinfo);
if (err)
return err;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
if (nl80211_send_mpath(msg, info->snd_portid, info->snd_seq, 0,
dev, dst, next_hop, &pinfo) < 0) {
nlmsg_free(msg);
return -ENOBUFS;
}
return genlmsg_reply(msg, info);
}
static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
u8 *dst = NULL;
u8 *next_hop = NULL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MPATH_NEXT_HOP])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
if (!rdev->ops->change_mpath)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
return rdev_change_mpath(rdev, dev, dst, next_hop);
}
static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
u8 *dst = NULL;
u8 *next_hop = NULL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MPATH_NEXT_HOP])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
if (!rdev->ops->add_mpath)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
return rdev_add_mpath(rdev, dev, dst, next_hop);
}
static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
u8 *dst = NULL;
if (info->attrs[NL80211_ATTR_MAC])
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (!rdev->ops->del_mpath)
return -EOPNOTSUPP;
return rdev_del_mpath(rdev, dev, dst);
}
static int nl80211_get_mpp(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int err;
struct net_device *dev = info->user_ptr[1];
struct mpath_info pinfo;
struct sk_buff *msg;
u8 *dst = NULL;
u8 mpp[ETH_ALEN];
memset(&pinfo, 0, sizeof(pinfo));
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (!rdev->ops->get_mpp)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
err = rdev_get_mpp(rdev, dev, dst, mpp, &pinfo);
if (err)
return err;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
if (nl80211_send_mpath(msg, info->snd_portid, info->snd_seq, 0,
dev, dst, mpp, &pinfo) < 0) {
nlmsg_free(msg);
return -ENOBUFS;
}
return genlmsg_reply(msg, info);
}
static int nl80211_dump_mpp(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct mpath_info pinfo;
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
u8 dst[ETH_ALEN];
u8 mpp[ETH_ALEN];
int path_idx = cb->args[2];
int err;
rtnl_lock();
err = nl80211_prepare_wdev_dump(skb, cb, &rdev, &wdev);
if (err)
goto out_err;
if (!rdev->ops->dump_mpp) {
err = -EOPNOTSUPP;
goto out_err;
}
if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
goto out_err;
}
while (1) {
err = rdev_dump_mpp(rdev, wdev->netdev, path_idx, dst,
mpp, &pinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err;
if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
wdev->netdev, dst, mpp,
&pinfo) < 0)
goto out;
path_idx++;
}
out:
cb->args[2] = path_idx;
err = skb->len;
out_err:
rtnl_unlock();
return err;
}
static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct bss_parameters params;
int err;
memset(&params, 0, sizeof(params));
/* default to not changing parameters */
params.use_cts_prot = -1;
params.use_short_preamble = -1;
params.use_short_slot_time = -1;
params.ap_isolate = -1;
params.ht_opmode = -1;
params.p2p_ctwindow = -1;
params.p2p_opp_ps = -1;
if (info->attrs[NL80211_ATTR_BSS_CTS_PROT])
params.use_cts_prot =
nla_get_u8(info->attrs[NL80211_ATTR_BSS_CTS_PROT]);
if (info->attrs[NL80211_ATTR_BSS_SHORT_PREAMBLE])
params.use_short_preamble =
nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_PREAMBLE]);
if (info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME])
params.use_short_slot_time =
nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME]);
if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
params.basic_rates =
nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
params.basic_rates_len =
nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
}
if (info->attrs[NL80211_ATTR_AP_ISOLATE])
params.ap_isolate = !!nla_get_u8(info->attrs[NL80211_ATTR_AP_ISOLATE]);
if (info->attrs[NL80211_ATTR_BSS_HT_OPMODE])
params.ht_opmode =
nla_get_u16(info->attrs[NL80211_ATTR_BSS_HT_OPMODE]);
if (info->attrs[NL80211_ATTR_P2P_CTWINDOW]) {
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
params.p2p_ctwindow =
nla_get_s8(info->attrs[NL80211_ATTR_P2P_CTWINDOW]);
if (params.p2p_ctwindow < 0)
return -EINVAL;
if (params.p2p_ctwindow != 0 &&
!(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_CTWIN))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_P2P_OPPPS]) {
u8 tmp;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
tmp = nla_get_u8(info->attrs[NL80211_ATTR_P2P_OPPPS]);
if (tmp > 1)
return -EINVAL;
params.p2p_opp_ps = tmp;
if (params.p2p_opp_ps &&
!(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_OPPPS))
return -EINVAL;
}
if (!rdev->ops->change_bss)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
wdev_lock(wdev);
err = rdev_change_bss(rdev, dev, &params);
wdev_unlock(wdev);
return err;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
{
char *data = NULL;
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 22:32:06 -07:00
bool is_indoor;
enum nl80211_user_reg_hint_type user_reg_hint_type;
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 22:32:06 -07:00
u32 owner_nlportid;
/*
* You should only get this when cfg80211 hasn't yet initialized
* completely when built-in to the kernel right between the time
* window between nl80211_init() and regulatory_init(), if that is
* even possible.
*/
if (unlikely(!rcu_access_pointer(cfg80211_regdomain)))
return -EINPROGRESS;
if (info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE])
user_reg_hint_type =
nla_get_u32(info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE]);
else
user_reg_hint_type = NL80211_USER_REG_HINT_USER;
switch (user_reg_hint_type) {
case NL80211_USER_REG_HINT_USER:
case NL80211_USER_REG_HINT_CELL_BASE:
if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
return -EINVAL;
data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
return regulatory_hint_user(data, user_reg_hint_type);
case NL80211_USER_REG_HINT_INDOOR:
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 22:32:06 -07:00
if (info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
owner_nlportid = info->snd_portid;
is_indoor = !!info->attrs[NL80211_ATTR_REG_INDOOR];
} else {
owner_nlportid = 0;
is_indoor = true;
}
return regulatory_hint_indoor(is_indoor, owner_nlportid);
default:
return -EINVAL;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
}
static int nl80211_get_mesh_config(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct mesh_config cur_params;
int err = 0;
void *hdr;
struct nlattr *pinfoattr;
struct sk_buff *msg;
if (wdev->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
if (!rdev->ops->get_mesh_config)
return -EOPNOTSUPP;
wdev_lock(wdev);
/* If not connected, get default parameters */
if (!wdev->mesh_id_len)
memcpy(&cur_params, &default_mesh_config, sizeof(cur_params));
else
err = rdev_get_mesh_config(rdev, dev, &cur_params);
wdev_unlock(wdev);
if (err)
return err;
/* Draw up a netlink message to send back */
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_GET_MESH_CONFIG);
if (!hdr)
goto out;
pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG);
if (!pinfoattr)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put_u16(msg, NL80211_MESHCONF_RETRY_TIMEOUT,
cur_params.dot11MeshRetryTimeout) ||
nla_put_u16(msg, NL80211_MESHCONF_CONFIRM_TIMEOUT,
cur_params.dot11MeshConfirmTimeout) ||
nla_put_u16(msg, NL80211_MESHCONF_HOLDING_TIMEOUT,
cur_params.dot11MeshHoldingTimeout) ||
nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
cur_params.dot11MeshMaxPeerLinks) ||
nla_put_u8(msg, NL80211_MESHCONF_MAX_RETRIES,
cur_params.dot11MeshMaxRetries) ||
nla_put_u8(msg, NL80211_MESHCONF_TTL,
cur_params.dot11MeshTTL) ||
nla_put_u8(msg, NL80211_MESHCONF_ELEMENT_TTL,
cur_params.element_ttl) ||
nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
cur_params.auto_open_plinks) ||
nla_put_u32(msg, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
cur_params.dot11MeshNbrOffsetMaxNeighbor) ||
nla_put_u8(msg, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
cur_params.dot11MeshHWMPmaxPREQretries) ||
nla_put_u32(msg, NL80211_MESHCONF_PATH_REFRESH_TIME,
cur_params.path_refresh_time) ||
nla_put_u16(msg, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
cur_params.min_discovery_timeout) ||
nla_put_u32(msg, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
cur_params.dot11MeshHWMPactivePathTimeout) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
cur_params.dot11MeshHWMPpreqMinInterval) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
cur_params.dot11MeshHWMPperrMinInterval) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
cur_params.dot11MeshHWMPnetDiameterTraversalTime) ||
nla_put_u8(msg, NL80211_MESHCONF_HWMP_ROOTMODE,
cur_params.dot11MeshHWMPRootMode) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_RANN_INTERVAL,
cur_params.dot11MeshHWMPRannInterval) ||
nla_put_u8(msg, NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
cur_params.dot11MeshGateAnnouncementProtocol) ||
nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
cur_params.dot11MeshForwarding) ||
nla_put_s32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
cur_params.rssi_threshold) ||
nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE,
cur_params.ht_opmode) ||
nla_put_u32(msg, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
cur_params.dot11MeshHWMPactivePathToRootTimeout) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
cur_params.dot11MeshHWMProotInterval) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
cur_params.dot11MeshHWMPconfirmationInterval) ||
nla_put_u32(msg, NL80211_MESHCONF_POWER_MODE,
cur_params.power_mode) ||
nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW,
cur_params.dot11MeshAwakeWindowDuration) ||
nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
cur_params.plink_timeout))
goto nla_put_failure;
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
genlmsg_cancel(msg, hdr);
out:
nlmsg_free(msg);
return -ENOBUFS;
}
static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] = {
[NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_HOLDING_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_MAX_PEER_LINKS] = { .type = NLA_U16 },
[NL80211_MESHCONF_MAX_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_TTL] = { .type = NLA_U8 },
[NL80211_MESHCONF_ELEMENT_TTL] = { .type = NLA_U8 },
[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
[NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
[NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_ROOTMODE] = { .type = NLA_U8 },
[NL80211_MESHCONF_HWMP_RANN_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 },
[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_POWER_MODE] = { .type = NLA_U32 },
[NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 },
[NL80211_MESHCONF_PLINK_TIMEOUT] = { .type = NLA_U32 },
};
static const struct nla_policy
nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
[NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC] = { .type = NLA_U8 },
[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
[NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
[NL80211_MESH_SETUP_AUTH_PROTOCOL] = { .type = NLA_U8 },
[NL80211_MESH_SETUP_USERSPACE_MPM] = { .type = NLA_FLAG },
[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG },
};
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
static int nl80211_check_bool(const struct nlattr *nla, u8 min, u8 max, bool *out)
{
u8 val = nla_get_u8(nla);
if (val < min || val > max)
return -EINVAL;
*out = val;
return 0;
}
static int nl80211_check_u8(const struct nlattr *nla, u8 min, u8 max, u8 *out)
{
u8 val = nla_get_u8(nla);
if (val < min || val > max)
return -EINVAL;
*out = val;
return 0;
}
static int nl80211_check_u16(const struct nlattr *nla, u16 min, u16 max, u16 *out)
{
u16 val = nla_get_u16(nla);
if (val < min || val > max)
return -EINVAL;
*out = val;
return 0;
}
static int nl80211_check_u32(const struct nlattr *nla, u32 min, u32 max, u32 *out)
{
u32 val = nla_get_u32(nla);
if (val < min || val > max)
return -EINVAL;
*out = val;
return 0;
}
static int nl80211_check_s32(const struct nlattr *nla, s32 min, s32 max, s32 *out)
{
s32 val = nla_get_s32(nla);
if (val < min || val > max)
return -EINVAL;
*out = val;
return 0;
}
static int nl80211_check_power_mode(const struct nlattr *nla,
enum nl80211_mesh_power_mode min,
enum nl80211_mesh_power_mode max,
enum nl80211_mesh_power_mode *out)
{
u32 val = nla_get_u32(nla);
if (val < min || val > max)
return -EINVAL;
*out = val;
return 0;
}
static int nl80211_parse_mesh_config(struct genl_info *info,
struct mesh_config *cfg,
u32 *mask_out)
{
struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1];
u32 mask = 0;
u16 ht_opmode;
#define FILL_IN_MESH_PARAM_IF_SET(tb, cfg, param, min, max, mask, attr, fn) \
do { \
if (tb[attr]) { \
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
if (fn(tb[attr], min, max, &cfg->param)) \
return -EINVAL; \
mask |= (1 << (attr - 1)); \
} \
} while (0)
if (!info->attrs[NL80211_ATTR_MESH_CONFIG])
return -EINVAL;
if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
info->attrs[NL80211_ATTR_MESH_CONFIG],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_meshconf_params_policy, info->extack))
return -EINVAL;
/* This makes sure that there aren't more than 32 mesh config
* parameters (otherwise our bitfield scheme would not work.) */
BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
/* Fill in the params struct */
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout, 1, 255,
mask, NL80211_MESHCONF_RETRY_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout, 1, 255,
mask, NL80211_MESHCONF_CONFIRM_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout, 1, 255,
mask, NL80211_MESHCONF_HOLDING_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks, 0, 255,
mask, NL80211_MESHCONF_MAX_PEER_LINKS,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries, 0, 16,
mask, NL80211_MESHCONF_MAX_RETRIES,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL, 1, 255,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
mask, NL80211_MESHCONF_TTL, nl80211_check_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl, 1, 255,
mask, NL80211_MESHCONF_ELEMENT_TTL,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks, 0, 1,
mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_bool);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor,
1, 255, mask,
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries, 0, 255,
mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time, 1, 65535,
mask, NL80211_MESHCONF_PATH_REFRESH_TIME,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout, 1, 65535,
mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
1, 65535, mask,
NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
1, 65535, mask,
NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPperrMinInterval,
1, 65535, mask,
NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPnetDiameterTraversalTime,
1, 65535, mask,
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, 0, 4,
mask, NL80211_MESHCONF_HWMP_ROOTMODE,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, 1, 65535,
mask, NL80211_MESHCONF_HWMP_RANN_INTERVAL,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshGateAnnouncementProtocol, 0, 1,
mask, NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_bool);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding, 0, 1,
mask, NL80211_MESHCONF_FORWARDING,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_bool);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, -255, 0,
mask, NL80211_MESHCONF_RSSI_THRESHOLD,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_s32);
/*
* Check HT operation mode based on
* IEEE 802.11-2016 9.4.2.57 HT Operation element.
*/
if (tb[NL80211_MESHCONF_HT_OPMODE]) {
ht_opmode = nla_get_u16(tb[NL80211_MESHCONF_HT_OPMODE]);
if (ht_opmode & ~(IEEE80211_HT_OP_MODE_PROTECTION |
IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT |
IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT))
return -EINVAL;
/* NON_HT_STA bit is reserved, but some programs set it */
ht_opmode &= ~IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT;
cfg->ht_opmode = ht_opmode;
mask |= (1 << (NL80211_MESHCONF_HT_OPMODE - 1));
}
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout,
1, 65535, mask,
NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, 1, 65535,
mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPconfirmationInterval,
1, 65535, mask,
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, power_mode,
NL80211_MESH_POWER_ACTIVE,
NL80211_MESH_POWER_MAX,
mask, NL80211_MESHCONF_POWER_MODE,
nl80211_check_power_mode);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshAwakeWindowDuration,
0, 65535, mask,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
NL80211_MESHCONF_AWAKE_WINDOW, nl80211_check_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, plink_timeout, 0, 0xffffffff,
mask, NL80211_MESHCONF_PLINK_TIMEOUT,
nl80211: improve nl80211_parse_mesh_config type checking When building a kernel with W=1, the nl80211.c file causes a number of warnings, all about the same problem: net/wireless/nl80211.c: In function 'nl80211_parse_mesh_config': net/wireless/nl80211.c:5287:103: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5290:96: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5293:124: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5295:148: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5298:106: error: comparison is always false due to limited range of data type [-Werror=type-limits] net/wireless/nl80211.c:5305:116: error: comparison is always false due to limited range of data type [-Werror=type-limits] The problem is that gcc does not notice that the check is generate by a macro, so it complains about comparing an unsigned type against 0. I've tried to come up with a way to rephrase that code in a way that avoids the warnings and otherwise improves the code as well. This uses a set of new helper functions that perform the range checking, and should provide slightly better type safety than the older patch, at the expense of adding 44 lines to the code. Binary code size is basically unchanged though (20 bytes added to 126561 bytes .text). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-15 14:29:41 -06:00
nl80211_check_u32);
if (mask_out)
*mask_out = mask;
return 0;
#undef FILL_IN_MESH_PARAM_IF_SET
}
static int nl80211_parse_mesh_setup(struct genl_info *info,
struct mesh_setup *setup)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct nlattr *tb[NL80211_MESH_SETUP_ATTR_MAX + 1];
if (!info->attrs[NL80211_ATTR_MESH_SETUP])
return -EINVAL;
if (nla_parse_nested(tb, NL80211_MESH_SETUP_ATTR_MAX,
info->attrs[NL80211_ATTR_MESH_SETUP],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_mesh_setup_params_policy, info->extack))
return -EINVAL;
if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC])
setup->sync_method =
(nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC])) ?
IEEE80211_SYNC_METHOD_VENDOR :
IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET;
if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL])
setup->path_sel_proto =
(nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL])) ?
IEEE80211_PATH_PROTOCOL_VENDOR :
IEEE80211_PATH_PROTOCOL_HWMP;
if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC])
setup->path_metric =
(nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC])) ?
IEEE80211_PATH_METRIC_VENDOR :
IEEE80211_PATH_METRIC_AIRTIME;
if (tb[NL80211_MESH_SETUP_IE]) {
struct nlattr *ieattr =
tb[NL80211_MESH_SETUP_IE];
if (!is_valid_ie_attr(ieattr))
return -EINVAL;
setup->ie = nla_data(ieattr);
setup->ie_len = nla_len(ieattr);
}
if (tb[NL80211_MESH_SETUP_USERSPACE_MPM] &&
!(rdev->wiphy.features & NL80211_FEATURE_USERSPACE_MPM))
return -EINVAL;
setup->user_mpm = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_MPM]);
setup->is_authenticated = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AMPE]);
if (setup->is_secure)
setup->user_mpm = true;
if (tb[NL80211_MESH_SETUP_AUTH_PROTOCOL]) {
if (!setup->user_mpm)
return -EINVAL;
setup->auth_id =
nla_get_u8(tb[NL80211_MESH_SETUP_AUTH_PROTOCOL]);
}
return 0;
}
static int nl80211_update_mesh_config(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct mesh_config cfg;
u32 mask;
int err;
if (wdev->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
if (!rdev->ops->update_mesh_config)
return -EOPNOTSUPP;
err = nl80211_parse_mesh_config(info, &cfg, &mask);
if (err)
return err;
wdev_lock(wdev);
if (!wdev->mesh_id_len)
err = -ENOLINK;
if (!err)
err = rdev_update_mesh_config(rdev, dev, mask, &cfg);
wdev_unlock(wdev);
return err;
}
static int nl80211_put_regdom(const struct ieee80211_regdomain *regdom,
struct sk_buff *msg)
{
struct nlattr *nl_reg_rules;
unsigned int i;
if (nla_put_string(msg, NL80211_ATTR_REG_ALPHA2, regdom->alpha2) ||
(regdom->dfs_region &&
nla_put_u8(msg, NL80211_ATTR_DFS_REGION, regdom->dfs_region)))
goto nla_put_failure;
nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES);
if (!nl_reg_rules)
goto nla_put_failure;
for (i = 0; i < regdom->n_reg_rules; i++) {
struct nlattr *nl_reg_rule;
const struct ieee80211_reg_rule *reg_rule;
const struct ieee80211_freq_range *freq_range;
const struct ieee80211_power_rule *power_rule;
unsigned int max_bandwidth_khz;
reg_rule = &regdom->reg_rules[i];
freq_range = &reg_rule->freq_range;
power_rule = &reg_rule->power_rule;
nl_reg_rule = nla_nest_start(msg, i);
if (!nl_reg_rule)
goto nla_put_failure;
max_bandwidth_khz = freq_range->max_bandwidth_khz;
if (!max_bandwidth_khz)
max_bandwidth_khz = reg_get_max_bandwidth(regdom,
reg_rule);
if (nla_put_u32(msg, NL80211_ATTR_REG_RULE_FLAGS,
reg_rule->flags) ||
nla_put_u32(msg, NL80211_ATTR_FREQ_RANGE_START,
freq_range->start_freq_khz) ||
nla_put_u32(msg, NL80211_ATTR_FREQ_RANGE_END,
freq_range->end_freq_khz) ||
nla_put_u32(msg, NL80211_ATTR_FREQ_RANGE_MAX_BW,
max_bandwidth_khz) ||
nla_put_u32(msg, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
power_rule->max_antenna_gain) ||
nla_put_u32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP,
power_rule->max_eirp) ||
nla_put_u32(msg, NL80211_ATTR_DFS_CAC_TIME,
reg_rule->dfs_cac_ms))
goto nla_put_failure;
nla_nest_end(msg, nl_reg_rule);
}
nla_nest_end(msg, nl_reg_rules);
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int nl80211_get_reg_do(struct sk_buff *skb, struct genl_info *info)
{
const struct ieee80211_regdomain *regdom = NULL;
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy = NULL;
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOBUFS;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_GET_REG);
if (!hdr)
goto put_failure;
if (info->attrs[NL80211_ATTR_WIPHY]) {
bool self_managed;
rdev = cfg80211_get_dev_from_info(genl_info_net(info), info);
if (IS_ERR(rdev)) {
nlmsg_free(msg);
return PTR_ERR(rdev);
}
wiphy = &rdev->wiphy;
self_managed = wiphy->regulatory_flags &
REGULATORY_WIPHY_SELF_MANAGED;
regdom = get_wiphy_regdom(wiphy);
/* a self-managed-reg device must have a private regdom */
if (WARN_ON(!regdom && self_managed)) {
nlmsg_free(msg);
return -EINVAL;
}
if (regdom &&
nla_put_u32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy)))
goto nla_put_failure;
}
if (!wiphy && reg_last_request_cell_base() &&
nla_put_u32(msg, NL80211_ATTR_USER_REG_HINT_TYPE,
NL80211_USER_REG_HINT_CELL_BASE))
goto nla_put_failure;
rcu_read_lock();
if (!regdom)
regdom = rcu_dereference(cfg80211_regdomain);
if (nl80211_put_regdom(regdom, msg))
goto nla_put_failure_rcu;
rcu_read_unlock();
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure_rcu:
rcu_read_unlock();
nla_put_failure:
genlmsg_cancel(msg, hdr);
put_failure:
nlmsg_free(msg);
return -EMSGSIZE;
}
static int nl80211_send_regdom(struct sk_buff *msg, struct netlink_callback *cb,
u32 seq, int flags, struct wiphy *wiphy,
const struct ieee80211_regdomain *regdom)
{
void *hdr = nl80211hdr_put(msg, NETLINK_CB(cb->skb).portid, seq, flags,
NL80211_CMD_GET_REG);
if (!hdr)
return -1;
genl_dump_check_consistent(cb, hdr, &nl80211_fam);
if (nl80211_put_regdom(regdom, msg))
goto nla_put_failure;
if (!wiphy && reg_last_request_cell_base() &&
nla_put_u32(msg, NL80211_ATTR_USER_REG_HINT_TYPE,
NL80211_USER_REG_HINT_CELL_BASE))
goto nla_put_failure;
if (wiphy &&
nla_put_u32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy)))
goto nla_put_failure;
if (wiphy && wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED &&
nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_get_reg_dump(struct sk_buff *skb,
struct netlink_callback *cb)
{
const struct ieee80211_regdomain *regdom = NULL;
struct cfg80211_registered_device *rdev;
int err, reg_idx, start = cb->args[2];
rtnl_lock();
if (cfg80211_regdomain && start == 0) {
err = nl80211_send_regdom(skb, cb, cb->nlh->nlmsg_seq,
NLM_F_MULTI, NULL,
rtnl_dereference(cfg80211_regdomain));
if (err < 0)
goto out_err;
}
/* the global regdom is idx 0 */
reg_idx = 1;
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
regdom = get_wiphy_regdom(&rdev->wiphy);
if (!regdom)
continue;
if (++reg_idx <= start)
continue;
err = nl80211_send_regdom(skb, cb, cb->nlh->nlmsg_seq,
NLM_F_MULTI, &rdev->wiphy, regdom);
if (err < 0) {
reg_idx--;
break;
}
}
cb->args[2] = reg_idx;
err = skb->len;
out_err:
rtnl_unlock();
return err;
}
#ifdef CONFIG_CFG80211_CRDA_SUPPORT
static const struct nla_policy reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] = {
[NL80211_ATTR_REG_RULE_FLAGS] = { .type = NLA_U32 },
[NL80211_ATTR_FREQ_RANGE_START] = { .type = NLA_U32 },
[NL80211_ATTR_FREQ_RANGE_END] = { .type = NLA_U32 },
[NL80211_ATTR_FREQ_RANGE_MAX_BW] = { .type = NLA_U32 },
[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN] = { .type = NLA_U32 },
[NL80211_ATTR_POWER_RULE_MAX_EIRP] = { .type = NLA_U32 },
[NL80211_ATTR_DFS_CAC_TIME] = { .type = NLA_U32 },
};
static int parse_reg_rule(struct nlattr *tb[],
struct ieee80211_reg_rule *reg_rule)
{
struct ieee80211_freq_range *freq_range = &reg_rule->freq_range;
struct ieee80211_power_rule *power_rule = &reg_rule->power_rule;
if (!tb[NL80211_ATTR_REG_RULE_FLAGS])
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_START])
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_END])
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
return -EINVAL;
if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP])
return -EINVAL;
reg_rule->flags = nla_get_u32(tb[NL80211_ATTR_REG_RULE_FLAGS]);
freq_range->start_freq_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]);
freq_range->end_freq_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]);
freq_range->max_bandwidth_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
power_rule->max_eirp =
nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]);
if (tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN])
power_rule->max_antenna_gain =
nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]);
if (tb[NL80211_ATTR_DFS_CAC_TIME])
reg_rule->dfs_cac_ms =
nla_get_u32(tb[NL80211_ATTR_DFS_CAC_TIME]);
return 0;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
struct nlattr *nl_reg_rule;
char *alpha2;
int rem_reg_rules, r;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
u32 num_rules = 0, rule_idx = 0, size_of_regd;
enum nl80211_dfs_regions dfs_region = NL80211_DFS_UNSET;
struct ieee80211_regdomain *rd;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_REG_RULES])
return -EINVAL;
alpha2 = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
if (info->attrs[NL80211_ATTR_DFS_REGION])
dfs_region = nla_get_u8(info->attrs[NL80211_ATTR_DFS_REGION]);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
rem_reg_rules) {
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
num_rules++;
if (num_rules > NL80211_MAX_SUPP_REG_RULES)
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
}
if (!reg_is_valid_request(alpha2))
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
size_of_regd = sizeof(struct ieee80211_regdomain) +
num_rules * sizeof(struct ieee80211_reg_rule);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd)
return -ENOMEM;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
rd->n_reg_rules = num_rules;
rd->alpha2[0] = alpha2[0];
rd->alpha2[1] = alpha2[1];
/*
* Disable DFS master mode if the DFS region was
* not supported or known on this kernel.
*/
if (reg_supported_dfs_region(dfs_region))
rd->dfs_region = dfs_region;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
rem_reg_rules) {
r = nla_parse_nested(tb, NL80211_REG_RULE_ATTR_MAX,
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl_reg_rule, reg_rule_policy,
info->extack);
if (r)
goto bad_reg;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]);
if (r)
goto bad_reg;
rule_idx++;
if (rule_idx > NL80211_MAX_SUPP_REG_RULES) {
r = -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
goto bad_reg;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
}
/* set_regdom takes ownership of rd */
return set_regdom(rd, REGD_SOURCE_CRDA);
bad_reg:
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
kfree(rd);
return r;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
}
#endif /* CONFIG_CFG80211_CRDA_SUPPORT */
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
static int validate_scan_freqs(struct nlattr *freqs)
{
struct nlattr *attr1, *attr2;
int n_channels = 0, tmp1, tmp2;
nla_for_each_nested(attr1, freqs, tmp1)
if (nla_len(attr1) != sizeof(u32))
return 0;
nla_for_each_nested(attr1, freqs, tmp1) {
n_channels++;
/*
* Some hardware has a limited channel list for
* scanning, and it is pretty much nonsensical
* to scan for a channel twice, so disallow that
* and don't require drivers to check that the
* channel list they get isn't longer than what
* they can scan, as long as they can scan all
* the channels they registered at once.
*/
nla_for_each_nested(attr2, freqs, tmp2)
if (attr1 != attr2 &&
nla_get_u32(attr1) == nla_get_u32(attr2))
return 0;
}
return n_channels;
}
static bool is_band_valid(struct wiphy *wiphy, enum nl80211_band b)
{
return b < NUM_NL80211_BANDS && wiphy->bands[b];
}
static int parse_bss_select(struct nlattr *nla, struct wiphy *wiphy,
struct cfg80211_bss_selection *bss_select)
{
struct nlattr *attr[NL80211_BSS_SELECT_ATTR_MAX + 1];
struct nlattr *nest;
int err;
bool found = false;
int i;
/* only process one nested attribute */
nest = nla_data(nla);
if (!nla_ok(nest, nla_len(nest)))
return -EINVAL;
err = nla_parse_nested(attr, NL80211_BSS_SELECT_ATTR_MAX, nest,
nl80211_bss_select_policy, NULL);
if (err)
return err;
/* only one attribute may be given */
for (i = 0; i <= NL80211_BSS_SELECT_ATTR_MAX; i++) {
if (attr[i]) {
if (found)
return -EINVAL;
found = true;
}
}
bss_select->behaviour = __NL80211_BSS_SELECT_ATTR_INVALID;
if (attr[NL80211_BSS_SELECT_ATTR_RSSI])
bss_select->behaviour = NL80211_BSS_SELECT_ATTR_RSSI;
if (attr[NL80211_BSS_SELECT_ATTR_BAND_PREF]) {
bss_select->behaviour = NL80211_BSS_SELECT_ATTR_BAND_PREF;
bss_select->param.band_pref =
nla_get_u32(attr[NL80211_BSS_SELECT_ATTR_BAND_PREF]);
if (!is_band_valid(wiphy, bss_select->param.band_pref))
return -EINVAL;
}
if (attr[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST]) {
struct nl80211_bss_select_rssi_adjust *adj_param;
adj_param = nla_data(attr[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST]);
bss_select->behaviour = NL80211_BSS_SELECT_ATTR_RSSI_ADJUST;
bss_select->param.adjust.band = adj_param->band;
bss_select->param.adjust.delta = adj_param->delta;
if (!is_band_valid(wiphy, bss_select->param.adjust.band))
return -EINVAL;
}
/* user-space did not provide behaviour attribute */
if (bss_select->behaviour == __NL80211_BSS_SELECT_ATTR_INVALID)
return -EINVAL;
if (!(wiphy->bss_select_support & BIT(bss_select->behaviour)))
return -EINVAL;
return 0;
}
static int nl80211_parse_random_mac(struct nlattr **attrs,
u8 *mac_addr, u8 *mac_addr_mask)
{
int i;
if (!attrs[NL80211_ATTR_MAC] && !attrs[NL80211_ATTR_MAC_MASK]) {
eth_zero_addr(mac_addr);
eth_zero_addr(mac_addr_mask);
mac_addr[0] = 0x2;
mac_addr_mask[0] = 0x3;
return 0;
}
/* need both or none */
if (!attrs[NL80211_ATTR_MAC] || !attrs[NL80211_ATTR_MAC_MASK])
return -EINVAL;
memcpy(mac_addr, nla_data(attrs[NL80211_ATTR_MAC]), ETH_ALEN);
memcpy(mac_addr_mask, nla_data(attrs[NL80211_ATTR_MAC_MASK]), ETH_ALEN);
/* don't allow or configure an mcast address */
if (!is_multicast_ether_addr(mac_addr_mask) ||
is_multicast_ether_addr(mac_addr))
return -EINVAL;
/*
* allow users to pass a MAC address that has bits set outside
* of the mask, but don't bother drivers with having to deal
* with such bits
*/
for (i = 0; i < ETH_ALEN; i++)
mac_addr[i] &= mac_addr_mask[i];
return 0;
}
static bool cfg80211_off_channel_oper_allowed(struct wireless_dev *wdev)
{
ASSERT_WDEV_LOCK(wdev);
if (!cfg80211_beaconing_iface_active(wdev))
return true;
if (!(wdev->chandef.chan->flags & IEEE80211_CHAN_RADAR))
return true;
return regulatory_pre_cac_allowed(wdev->wiphy);
}
static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_scan_request *request;
struct nlattr *attr;
struct wiphy *wiphy;
int err, tmp, n_ssids = 0, n_channels, i;
size_t ie_len;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
wiphy = &rdev->wiphy;
if (wdev->iftype == NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!rdev->ops->scan)
return -EOPNOTSUPP;
if (rdev->scan_req || rdev->scan_msg) {
err = -EBUSY;
goto unlock;
}
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
if (!n_channels) {
err = -EINVAL;
goto unlock;
}
} else {
n_channels = ieee80211_get_num_supported_channels(wiphy);
}
if (info->attrs[NL80211_ATTR_SCAN_SSIDS])
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp)
n_ssids++;
if (n_ssids > wiphy->max_scan_ssids) {
err = -EINVAL;
goto unlock;
}
if (info->attrs[NL80211_ATTR_IE])
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
if (ie_len > wiphy->max_scan_ie_len) {
err = -EINVAL;
goto unlock;
}
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
if (!request) {
err = -ENOMEM;
goto unlock;
}
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
request->n_ssids = n_ssids;
if (ie_len) {
if (n_ssids)
request->ie = (void *)(request->ssids + n_ssids);
else
request->ie = (void *)(request->channels + n_channels);
}
i = 0;
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
/* user specified, bail out if channel not found */
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp) {
struct ieee80211_channel *chan;
chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
if (!chan) {
err = -EINVAL;
goto out_free;
}
/* ignore disabled channels */
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
request->channels[i] = chan;
i++;
}
} else {
enum nl80211_band band;
/* all channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
struct ieee80211_channel *chan;
chan = &wiphy->bands[band]->channels[j];
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
request->channels[i] = chan;
i++;
}
}
}
if (!i) {
err = -EINVAL;
goto out_free;
}
request->n_channels = i;
wdev_lock(wdev);
if (!cfg80211_off_channel_oper_allowed(wdev)) {
struct ieee80211_channel *chan;
if (request->n_channels != 1) {
wdev_unlock(wdev);
err = -EBUSY;
goto out_free;
}
chan = request->channels[0];
if (chan->center_freq != wdev->chandef.chan->center_freq) {
wdev_unlock(wdev);
err = -EBUSY;
goto out_free;
}
}
wdev_unlock(wdev);
i = 0;
if (n_ssids) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr));
i++;
}
}
if (info->attrs[NL80211_ATTR_IE]) {
request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
memcpy((void *)request->ie,
nla_data(info->attrs[NL80211_ATTR_IE]),
request->ie_len);
}
for (i = 0; i < NUM_NL80211_BANDS; i++)
if (wiphy->bands[i])
request->rates[i] =
(1 << wiphy->bands[i]->n_bitrates) - 1;
if (info->attrs[NL80211_ATTR_SCAN_SUPP_RATES]) {
nla_for_each_nested(attr,
info->attrs[NL80211_ATTR_SCAN_SUPP_RATES],
tmp) {
enum nl80211_band band = nla_type(attr);
if (band < 0 || band >= NUM_NL80211_BANDS) {
err = -EINVAL;
goto out_free;
}
if (!wiphy->bands[band])
continue;
err = ieee80211_get_ratemask(wiphy->bands[band],
nla_data(attr),
nla_len(attr),
&request->rates[band]);
if (err)
goto out_free;
}
}
if (info->attrs[NL80211_ATTR_MEASUREMENT_DURATION]) {
if (!wiphy_ext_feature_isset(wiphy,
NL80211_EXT_FEATURE_SET_SCAN_DWELL)) {
err = -EOPNOTSUPP;
goto out_free;
}
request->duration =
nla_get_u16(info->attrs[NL80211_ATTR_MEASUREMENT_DURATION]);
request->duration_mandatory =
nla_get_flag(info->attrs[NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY]);
}
if (info->attrs[NL80211_ATTR_SCAN_FLAGS]) {
request->flags = nla_get_u32(
info->attrs[NL80211_ATTR_SCAN_FLAGS]);
if ((request->flags & NL80211_SCAN_FLAG_LOW_PRIORITY) &&
!(wiphy->features & NL80211_FEATURE_LOW_PRIORITY_SCAN)) {
err = -EOPNOTSUPP;
goto out_free;
}
if (request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
if (!(wiphy->features &
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR)) {
err = -EOPNOTSUPP;
goto out_free;
}
if (wdev->current_bss) {
err = -EOPNOTSUPP;
goto out_free;
}
err = nl80211_parse_random_mac(info->attrs,
request->mac_addr,
request->mac_addr_mask);
if (err)
goto out_free;
}
}
request->no_cck =
nla_get_flag(info->attrs[NL80211_ATTR_TX_NO_CCK_RATE]);
/* Initial implementation used NL80211_ATTR_MAC to set the specific
* BSSID to scan for. This was problematic because that same attribute
* was already used for another purpose (local random MAC address). The
* NL80211_ATTR_BSSID attribute was added to fix this. For backwards
* compatibility with older userspace components, also use the
* NL80211_ATTR_MAC value here if it can be determined to be used for
* the specific BSSID use case instead of the random MAC address
* (NL80211_ATTR_SCAN_FLAGS is used to enable random MAC address use).
*/
if (info->attrs[NL80211_ATTR_BSSID])
memcpy(request->bssid,
nla_data(info->attrs[NL80211_ATTR_BSSID]), ETH_ALEN);
else if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) &&
info->attrs[NL80211_ATTR_MAC])
memcpy(request->bssid, nla_data(info->attrs[NL80211_ATTR_MAC]),
ETH_ALEN);
else
eth_broadcast_addr(request->bssid);
request->wdev = wdev;
request->wiphy = &rdev->wiphy;
request->scan_start = jiffies;
rdev->scan_req = request;
err = rdev_scan(rdev, request);
if (!err) {
nl80211_send_scan_start(rdev, wdev);
if (wdev->netdev)
dev_hold(wdev->netdev);
} else {
out_free:
rdev->scan_req = NULL;
kfree(request);
}
unlock:
return err;
}
static int nl80211_abort_scan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
if (!rdev->ops->abort_scan)
return -EOPNOTSUPP;
if (rdev->scan_msg)
return 0;
if (!rdev->scan_req)
return -ENOENT;
rdev_abort_scan(rdev, wdev);
return 0;
}
static int
nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans,
struct cfg80211_sched_scan_request *request,
struct nlattr **attrs)
{
int tmp, err, i = 0;
struct nlattr *attr;
if (!attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
u32 interval;
/*
* If scan plans are not specified,
* %NL80211_ATTR_SCHED_SCAN_INTERVAL will be specified. In this
* case one scan plan will be set with the specified scan
* interval and infinite number of iterations.
*/
interval = nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
if (!interval)
return -EINVAL;
request->scan_plans[0].interval =
DIV_ROUND_UP(interval, MSEC_PER_SEC);
if (!request->scan_plans[0].interval)
return -EINVAL;
if (request->scan_plans[0].interval >
wiphy->max_sched_scan_plan_interval)
request->scan_plans[0].interval =
wiphy->max_sched_scan_plan_interval;
return 0;
}
nla_for_each_nested(attr, attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp) {
struct nlattr *plan[NL80211_SCHED_SCAN_PLAN_MAX + 1];
if (WARN_ON(i >= n_plans))
return -EINVAL;
err = nla_parse_nested(plan, NL80211_SCHED_SCAN_PLAN_MAX,
attr, nl80211_plan_policy, NULL);
if (err)
return err;
if (!plan[NL80211_SCHED_SCAN_PLAN_INTERVAL])
return -EINVAL;
request->scan_plans[i].interval =
nla_get_u32(plan[NL80211_SCHED_SCAN_PLAN_INTERVAL]);
if (!request->scan_plans[i].interval ||
request->scan_plans[i].interval >
wiphy->max_sched_scan_plan_interval)
return -EINVAL;
if (plan[NL80211_SCHED_SCAN_PLAN_ITERATIONS]) {
request->scan_plans[i].iterations =
nla_get_u32(plan[NL80211_SCHED_SCAN_PLAN_ITERATIONS]);
if (!request->scan_plans[i].iterations ||
(request->scan_plans[i].iterations >
wiphy->max_sched_scan_plan_iterations))
return -EINVAL;
} else if (i < n_plans - 1) {
/*
* All scan plans but the last one must specify
* a finite number of iterations
*/
return -EINVAL;
}
i++;
}
/*
* The last scan plan must not specify the number of
* iterations, it is supposed to run infinitely
*/
if (request->scan_plans[n_plans - 1].iterations)
return -EINVAL;
return 0;
}
static struct cfg80211_sched_scan_request *
nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
struct nlattr **attrs, int max_match_sets)
{
struct cfg80211_sched_scan_request *request;
struct nlattr *attr;
int err, tmp, n_ssids = 0, n_match_sets = 0, n_channels, i, n_plans = 0;
enum nl80211_band band;
size_t ie_len;
struct nlattr *tb[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1];
s32 default_match_rssi = NL80211_SCAN_RSSI_THOLD_OFF;
if (!is_valid_ie_attr(attrs[NL80211_ATTR_IE]))
return ERR_PTR(-EINVAL);
if (attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
if (!n_channels)
return ERR_PTR(-EINVAL);
} else {
n_channels = ieee80211_get_num_supported_channels(wiphy);
}
if (attrs[NL80211_ATTR_SCAN_SSIDS])
nla_for_each_nested(attr, attrs[NL80211_ATTR_SCAN_SSIDS],
tmp)
n_ssids++;
if (n_ssids > wiphy->max_sched_scan_ssids)
return ERR_PTR(-EINVAL);
/*
* First, count the number of 'real' matchsets. Due to an issue with
* the old implementation, matchsets containing only the RSSI attribute
* (NL80211_SCHED_SCAN_MATCH_ATTR_RSSI) are considered as the 'default'
* RSSI for all matchsets, rather than their own matchset for reporting
* all APs with a strong RSSI. This is needed to be compatible with
* older userspace that treated a matchset with only the RSSI as the
* global RSSI for all other matchsets - if there are other matchsets.
*/
if (attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) {
nla_for_each_nested(attr,
attrs[NL80211_ATTR_SCHED_SCAN_MATCH],
tmp) {
struct nlattr *rssi;
err = nla_parse_nested(tb,
NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
attr, nl80211_match_policy,
NULL);
if (err)
return ERR_PTR(err);
/* SSID and BSSID are mutually exclusive */
if (tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID] &&
tb[NL80211_SCHED_SCAN_MATCH_ATTR_BSSID])
return ERR_PTR(-EINVAL);
/* add other standalone attributes here */
if (tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID] ||
tb[NL80211_SCHED_SCAN_MATCH_ATTR_BSSID]) {
n_match_sets++;
continue;
}
rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
if (rssi)
default_match_rssi = nla_get_s32(rssi);
}
}
/* However, if there's no other matchset, add the RSSI one */
if (!n_match_sets && default_match_rssi != NL80211_SCAN_RSSI_THOLD_OFF)
n_match_sets = 1;
if (n_match_sets > max_match_sets)
return ERR_PTR(-EINVAL);
if (attrs[NL80211_ATTR_IE])
ie_len = nla_len(attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
if (ie_len > wiphy->max_sched_scan_ie_len)
return ERR_PTR(-EINVAL);
if (attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
/*
* NL80211_ATTR_SCHED_SCAN_INTERVAL must not be specified since
* each scan plan already specifies its own interval
*/
if (attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
return ERR_PTR(-EINVAL);
nla_for_each_nested(attr,
attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp)
n_plans++;
} else {
/*
* The scan interval attribute is kept for backward
* compatibility. If no scan plans are specified and sched scan
* interval is specified, one scan plan will be set with this
* scan interval and infinite number of iterations.
*/
if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
return ERR_PTR(-EINVAL);
n_plans = 1;
}
if (!n_plans || n_plans > wiphy->max_sched_scan_plans)
return ERR_PTR(-EINVAL);
if (!wiphy_ext_feature_isset(
wiphy, NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI) &&
(attrs[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI] ||
attrs[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST]))
return ERR_PTR(-EINVAL);
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->match_sets) * n_match_sets
+ sizeof(*request->scan_plans) * n_plans
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
if (!request)
return ERR_PTR(-ENOMEM);
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
request->n_ssids = n_ssids;
if (ie_len) {
if (n_ssids)
request->ie = (void *)(request->ssids + n_ssids);
else
request->ie = (void *)(request->channels + n_channels);
}
if (n_match_sets) {
if (request->ie)
request->match_sets = (void *)(request->ie + ie_len);
else if (n_ssids)
request->match_sets =
(void *)(request->ssids + n_ssids);
else
request->match_sets =
(void *)(request->channels + n_channels);
}
request->n_match_sets = n_match_sets;
if (n_match_sets)
request->scan_plans = (void *)(request->match_sets +
n_match_sets);
else if (request->ie)
request->scan_plans = (void *)(request->ie + ie_len);
else if (n_ssids)
request->scan_plans = (void *)(request->ssids + n_ssids);
else
request->scan_plans = (void *)(request->channels + n_channels);
request->n_scan_plans = n_plans;
i = 0;
if (attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
/* user specified, bail out if channel not found */
nla_for_each_nested(attr,
attrs[NL80211_ATTR_SCAN_FREQUENCIES],
tmp) {
struct ieee80211_channel *chan;
chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
if (!chan) {
err = -EINVAL;
goto out_free;
}
/* ignore disabled channels */
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
request->channels[i] = chan;
i++;
}
} else {
/* all channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
struct ieee80211_channel *chan;
chan = &wiphy->bands[band]->channels[j];
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
request->channels[i] = chan;
i++;
}
}
}
if (!i) {
err = -EINVAL;
goto out_free;
}
request->n_channels = i;
i = 0;
if (n_ssids) {
nla_for_each_nested(attr, attrs[NL80211_ATTR_SCAN_SSIDS],
tmp) {
if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr),
nla_len(attr));
i++;
}
}
i = 0;
if (attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) {
nla_for_each_nested(attr,
attrs[NL80211_ATTR_SCHED_SCAN_MATCH],
tmp) {
struct nlattr *ssid, *bssid, *rssi;
err = nla_parse_nested(tb,
NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
attr, nl80211_match_policy,
NULL);
if (err)
goto out_free;
ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID];
bssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_BSSID];
if (ssid || bssid) {
if (WARN_ON(i >= n_match_sets)) {
/* this indicates a programming error,
* the loop above should have verified
* things properly
*/
err = -EINVAL;
goto out_free;
}
if (ssid) {
if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
memcpy(request->match_sets[i].ssid.ssid,
nla_data(ssid), nla_len(ssid));
request->match_sets[i].ssid.ssid_len =
nla_len(ssid);
}
if (bssid) {
if (nla_len(bssid) != ETH_ALEN) {
err = -EINVAL;
goto out_free;
}
memcpy(request->match_sets[i].bssid,
nla_data(bssid), ETH_ALEN);
}
/* special attribute - old implementation w/a */
request->match_sets[i].rssi_thold =
default_match_rssi;
rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
if (rssi)
request->match_sets[i].rssi_thold =
nla_get_s32(rssi);
}
i++;
}
/* there was no other matchset, so the RSSI one is alone */
nl80211: check matches array length before acessing it If the userspace passes a malformed sched scan request (or a net detect wowlan configuration) by adding a NL80211_ATTR_SCHED_SCAN_MATCH attribute without any nested matchsets, a NULL pointer dereference will occur. Fix this by checking that we do have matchsets in our array before trying to access it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 IP: [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] PGD 865c067 PUD 865b067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [last unloaded: compat] CPU: 2 PID: 2442 Comm: iw Tainted: G O 3.17.2 #31 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880013800790 ti: ffff880008d80000 task.ti: ffff880008d80000 RIP: 0010:[<ffffffffa002fd69>] [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] RSP: 0018:ffff880008d838d0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000143c RSI: 0000000000000000 RDI: ffff880008ee8dd0 RBP: ffff880008d83948 R08: 0000000000000002 R09: 0000000000000019 R10: ffff88001d1b3c40 R11: 0000000000000002 R12: ffff880019e85e00 R13: 00000000fffffed4 R14: ffff880009757800 R15: 0000000000001388 FS: 00007fa3b6d13700(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 0000000008670000 CR4: 00000000000006e0 Stack: ffff880009757800 ffff880000000001 0000000000000000 ffff880008ee84e0 0000000000000000 ffff880009757800 00000000fffffed4 ffff880008d83948 ffffffff814689c9 ffff880009757800 ffff880008ee8000 0000000000000000 Call Trace: [<ffffffff814689c9>] ? nla_parse+0xb9/0x120 [<ffffffffa00306de>] nl80211_set_wowlan+0x75e/0x960 [cfg80211] [<ffffffff810bf3d5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8161a77b>] genl_family_rcv_msg+0x18b/0x360 [<ffffffff810bf66d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8161a9d4>] genl_rcv_msg+0x84/0xc0 [<ffffffff8161a950>] ? genl_family_rcv_msg+0x360/0x360 [<ffffffff81618e79>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81619458>] genl_rcv+0x28/0x40 [<ffffffff816184a5>] netlink_unicast+0x105/0x180 [<ffffffff8161886f>] netlink_sendmsg+0x34f/0x7a0 [<ffffffff8105a097>] ? kvm_clock_read+0x27/0x40 [<ffffffff815c644d>] sock_sendmsg+0x8d/0xc0 [<ffffffff811a75c9>] ? might_fault+0xb9/0xc0 [<ffffffff811a756e>] ? might_fault+0x5e/0xc0 [<ffffffff815d5d26>] ? verify_iovec+0x56/0xe0 [<ffffffff815c73e0>] ___sys_sendmsg+0x3d0/0x3e0 [<ffffffff810a7be8>] ? sched_clock_cpu+0x98/0xd0 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff810bb39f>] ? up_read+0x1f/0x40 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff812146ed>] ? __fget_light+0x13d/0x160 [<ffffffff815c7b02>] __sys_sendmsg+0x42/0x80 [<ffffffff815c7b52>] SyS_sendmsg+0x12/0x20 [<ffffffff81751f69>] system_call_fastpath+0x16/0x1b Fixes: ea73cbce4e1f ("nl80211: fix scheduled scan RSSI matchset attribute confusion") Cc: stable@vger.kernel.org [3.15+] Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-01 02:32:09 -07:00
if (i == 0 && n_match_sets)
request->match_sets[0].rssi_thold = default_match_rssi;
request->min_rssi_thold = INT_MAX;
for (i = 0; i < n_match_sets; i++)
request->min_rssi_thold =
min(request->match_sets[i].rssi_thold,
request->min_rssi_thold);
} else {
request->min_rssi_thold = NL80211_SCAN_RSSI_THOLD_OFF;
}
if (ie_len) {
request->ie_len = ie_len;
memcpy((void *)request->ie,
nla_data(attrs[NL80211_ATTR_IE]),
request->ie_len);
}
if (attrs[NL80211_ATTR_SCAN_FLAGS]) {
request->flags = nla_get_u32(
attrs[NL80211_ATTR_SCAN_FLAGS]);
if ((request->flags & NL80211_SCAN_FLAG_LOW_PRIORITY) &&
!(wiphy->features & NL80211_FEATURE_LOW_PRIORITY_SCAN)) {
err = -EOPNOTSUPP;
goto out_free;
}
if (request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
u32 flg = NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR;
if (!wdev) /* must be net-detect */
flg = NL80211_FEATURE_ND_RANDOM_MAC_ADDR;
if (!(wiphy->features & flg)) {
err = -EOPNOTSUPP;
goto out_free;
}
if (wdev && wdev->current_bss) {
err = -EOPNOTSUPP;
goto out_free;
}
err = nl80211_parse_random_mac(attrs, request->mac_addr,
request->mac_addr_mask);
if (err)
goto out_free;
}
}
if (attrs[NL80211_ATTR_SCHED_SCAN_DELAY])
request->delay =
nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_DELAY]);
if (attrs[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI]) {
request->relative_rssi = nla_get_s8(
attrs[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI]);
request->relative_rssi_set = true;
}
if (request->relative_rssi_set &&
attrs[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST]) {
struct nl80211_bss_select_rssi_adjust *rssi_adjust;
rssi_adjust = nla_data(
attrs[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST]);
request->rssi_adjust.band = rssi_adjust->band;
request->rssi_adjust.delta = rssi_adjust->delta;
if (!is_band_valid(wiphy, request->rssi_adjust.band)) {
err = -EINVAL;
goto out_free;
}
}
err = nl80211_parse_sched_scan_plans(wiphy, n_plans, request, attrs);
if (err)
goto out_free;
request->scan_start = jiffies;
return request;
out_free:
kfree(request);
return ERR_PTR(err);
}
static int nl80211_start_sched_scan(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_sched_scan_request *sched_scan_req;
bool want_multi;
int err;
if (!rdev->wiphy.max_sched_scan_reqs || !rdev->ops->sched_scan_start)
return -EOPNOTSUPP;
want_multi = info->attrs[NL80211_ATTR_SCHED_SCAN_MULTI];
err = cfg80211_sched_scan_req_possible(rdev, want_multi);
if (err)
return err;
sched_scan_req = nl80211_parse_sched_scan(&rdev->wiphy, wdev,
info->attrs,
rdev->wiphy.max_match_sets);
err = PTR_ERR_OR_ZERO(sched_scan_req);
if (err)
goto out_err;
/* leave request id zero for legacy request
* or if driver does not support multi-scheduled scan
*/
if (want_multi && rdev->wiphy.max_sched_scan_reqs > 1) {
while (!sched_scan_req->reqid)
sched_scan_req->reqid = rdev->wiphy.cookie_counter++;
}
err = rdev_sched_scan_start(rdev, dev, sched_scan_req);
if (err)
goto out_free;
sched_scan_req->dev = dev;
sched_scan_req->wiphy = &rdev->wiphy;
if (info->attrs[NL80211_ATTR_SOCKET_OWNER])
sched_scan_req->owner_nlportid = info->snd_portid;
cfg80211_add_sched_scan_req(rdev, sched_scan_req);
nl80211_send_sched_scan(sched_scan_req, NL80211_CMD_START_SCHED_SCAN);
return 0;
out_free:
kfree(sched_scan_req);
out_err:
return err;
}
static int nl80211_stop_sched_scan(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_sched_scan_request *req;
struct cfg80211_registered_device *rdev = info->user_ptr[0];
u64 cookie;
if (!rdev->wiphy.max_sched_scan_reqs || !rdev->ops->sched_scan_stop)
return -EOPNOTSUPP;
if (info->attrs[NL80211_ATTR_COOKIE]) {
cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
return __cfg80211_stop_sched_scan(rdev, cookie, false);
}
req = list_first_or_null_rcu(&rdev->sched_scan_req_list,
struct cfg80211_sched_scan_request,
list);
if (!req || req->reqid ||
(req->owner_nlportid &&
req->owner_nlportid != info->snd_portid))
return -ENOENT;
return cfg80211_stop_sched_scan_req(rdev, req, false);
}
static int nl80211_start_radar_detection(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_chan_def chandef;
enum nl80211_dfs_regions dfs_region;
unsigned int cac_time_ms;
int err;
dfs_region = reg_get_dfs_region(wdev->wiphy);
if (dfs_region == NL80211_DFS_UNSET)
return -EINVAL;
err = nl80211_parse_chandef(rdev, info, &chandef);
if (err)
return err;
if (netif_carrier_ok(dev))
return -EBUSY;
if (wdev->cac_started)
return -EBUSY;
err = cfg80211_chandef_dfs_required(wdev->wiphy, &chandef,
wdev->iftype);
if (err < 0)
return err;
if (err == 0)
return -EINVAL;
if (!cfg80211_chandef_dfs_usable(wdev->wiphy, &chandef))
return -EINVAL;
if (!rdev->ops->start_radar_detection)
return -EOPNOTSUPP;
cac_time_ms = cfg80211_chandef_dfs_cac_time(&rdev->wiphy, &chandef);
if (WARN_ON(!cac_time_ms))
cac_time_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
err = rdev_start_radar_detection(rdev, dev, &chandef, cac_time_ms);
if (!err) {
wdev->chandef = chandef;
wdev->cac_started = true;
wdev->cac_start_time = jiffies;
wdev->cac_time_ms = cac_time_ms;
}
return err;
}
static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_csa_settings params;
/* csa_attrs is defined static to avoid waste of stack size - this
* function is called under RTNL lock, so this should not be a problem.
*/
static struct nlattr *csa_attrs[NL80211_ATTR_MAX+1];
int err;
bool need_new_beacon = false;
bool need_handle_dfs_flag = true;
int len, i;
u32 cs_count;
if (!rdev->ops->channel_switch ||
!(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH))
return -EOPNOTSUPP;
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
need_new_beacon = true;
/* For all modes except AP the handle_dfs flag needs to be
* supplied to tell the kernel that userspace will handle radar
* events when they happen. Otherwise a switch to a channel
* requiring DFS will be rejected.
*/
need_handle_dfs_flag = false;
/* useless if AP is not running */
if (!wdev->beacon_interval)
return -ENOTCONN;
break;
case NL80211_IFTYPE_ADHOC:
if (!wdev->ssid_len)
return -ENOTCONN;
break;
case NL80211_IFTYPE_MESH_POINT:
if (!wdev->mesh_id_len)
return -ENOTCONN;
break;
default:
return -EOPNOTSUPP;
}
memset(&params, 0, sizeof(params));
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
!info->attrs[NL80211_ATTR_CH_SWITCH_COUNT])
return -EINVAL;
/* only important for AP, IBSS and mesh create IEs internally */
if (need_new_beacon && !info->attrs[NL80211_ATTR_CSA_IES])
return -EINVAL;
/* Even though the attribute is u32, the specification says
* u8, so let's make sure we don't overflow.
*/
cs_count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
if (cs_count > 255)
return -EINVAL;
params.count = cs_count;
if (!need_new_beacon)
goto skip_beacons;
err = nl80211_parse_beacon(info->attrs, &params.beacon_after);
if (err)
return err;
err = nla_parse_nested(csa_attrs, NL80211_ATTR_MAX,
info->attrs[NL80211_ATTR_CSA_IES],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_policy, info->extack);
if (err)
return err;
err = nl80211_parse_beacon(csa_attrs, &params.beacon_csa);
if (err)
return err;
if (!csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON])
return -EINVAL;
len = nla_len(csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]);
if (!len || (len % sizeof(u16)))
return -EINVAL;
params.n_counter_offsets_beacon = len / sizeof(u16);
if (rdev->wiphy.max_num_csa_counters &&
(params.n_counter_offsets_beacon >
rdev->wiphy.max_num_csa_counters))
return -EINVAL;
params.counter_offsets_beacon =
nla_data(csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]);
/* sanity checks - counters should fit and be the same */
for (i = 0; i < params.n_counter_offsets_beacon; i++) {
u16 offset = params.counter_offsets_beacon[i];
if (offset >= params.beacon_csa.tail_len)
return -EINVAL;
if (params.beacon_csa.tail[offset] != params.count)
return -EINVAL;
}
if (csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]) {
len = nla_len(csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]);
if (!len || (len % sizeof(u16)))
return -EINVAL;
params.n_counter_offsets_presp = len / sizeof(u16);
if (rdev->wiphy.max_num_csa_counters &&
(params.n_counter_offsets_presp >
rdev->wiphy.max_num_csa_counters))
return -EINVAL;
params.counter_offsets_presp =
nla_data(csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]);
/* sanity checks - counters should fit and be the same */
for (i = 0; i < params.n_counter_offsets_presp; i++) {
u16 offset = params.counter_offsets_presp[i];
if (offset >= params.beacon_csa.probe_resp_len)
return -EINVAL;
if (params.beacon_csa.probe_resp[offset] !=
params.count)
return -EINVAL;
}
}
skip_beacons:
err = nl80211_parse_chandef(rdev, info, &params.chandef);
if (err)
return err;
if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &params.chandef,
wdev->iftype))
return -EINVAL;
err = cfg80211_chandef_dfs_required(wdev->wiphy,
&params.chandef,
wdev->iftype);
if (err < 0)
return err;
if (err > 0) {
params.radar_required = true;
if (need_handle_dfs_flag &&
!nla_get_flag(info->attrs[NL80211_ATTR_HANDLE_DFS])) {
return -EINVAL;
}
}
if (info->attrs[NL80211_ATTR_CH_SWITCH_BLOCK_TX])
params.block_tx = true;
wdev_lock(wdev);
err = rdev_channel_switch(rdev, dev, &params);
wdev_unlock(wdev);
return err;
}
static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb,
u32 seq, int flags,
struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
struct cfg80211_internal_bss *intbss)
{
struct cfg80211_bss *res = &intbss->pub;
const struct cfg80211_bss_ies *ies;
void *hdr;
struct nlattr *bss;
ASSERT_WDEV_LOCK(wdev);
hdr = nl80211hdr_put(msg, NETLINK_CB(cb->skb).portid, seq, flags,
NL80211_CMD_NEW_SCAN_RESULTS);
if (!hdr)
return -1;
genl_dump_check_consistent(cb, hdr, &nl80211_fam);
if (nla_put_u32(msg, NL80211_ATTR_GENERATION, rdev->bss_generation))
goto nla_put_failure;
if (wdev->netdev &&
nla_put_u32(msg, NL80211_ATTR_IFINDEX, wdev->netdev->ifindex))
goto nla_put_failure;
if (nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto nla_put_failure;
bss = nla_nest_start(msg, NL80211_ATTR_BSS);
if (!bss)
goto nla_put_failure;
if ((!is_zero_ether_addr(res->bssid) &&
nla_put(msg, NL80211_BSS_BSSID, ETH_ALEN, res->bssid)))
goto nla_put_failure;
rcu_read_lock();
/* indicate whether we have probe response data or not */
if (rcu_access_pointer(res->proberesp_ies) &&
nla_put_flag(msg, NL80211_BSS_PRESP_DATA))
goto fail_unlock_rcu;
/* this pointer prefers to be pointed to probe response data
* but is always valid
*/
ies = rcu_dereference(res->ies);
if (ies) {
if (nla_put_u64_64bit(msg, NL80211_BSS_TSF, ies->tsf,
NL80211_BSS_PAD))
goto fail_unlock_rcu;
if (ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS,
ies->len, ies->data))
goto fail_unlock_rcu;
}
/* and this pointer is always (unless driver didn't know) beacon data */
ies = rcu_dereference(res->beacon_ies);
if (ies && ies->from_beacon) {
if (nla_put_u64_64bit(msg, NL80211_BSS_BEACON_TSF, ies->tsf,
NL80211_BSS_PAD))
goto fail_unlock_rcu;
if (ies->len && nla_put(msg, NL80211_BSS_BEACON_IES,
ies->len, ies->data))
goto fail_unlock_rcu;
}
rcu_read_unlock();
if (res->beacon_interval &&
nla_put_u16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval))
goto nla_put_failure;
if (nla_put_u16(msg, NL80211_BSS_CAPABILITY, res->capability) ||
nla_put_u32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq) ||
nla_put_u32(msg, NL80211_BSS_CHAN_WIDTH, res->scan_width) ||
nla_put_u32(msg, NL80211_BSS_SEEN_MS_AGO,
jiffies_to_msecs(jiffies - intbss->ts)))
goto nla_put_failure;
if (intbss->parent_tsf &&
(nla_put_u64_64bit(msg, NL80211_BSS_PARENT_TSF,
intbss->parent_tsf, NL80211_BSS_PAD) ||
nla_put(msg, NL80211_BSS_PARENT_BSSID, ETH_ALEN,
intbss->parent_bssid)))
goto nla_put_failure;
if (intbss->ts_boottime &&
nla_put_u64_64bit(msg, NL80211_BSS_LAST_SEEN_BOOTTIME,
intbss->ts_boottime, NL80211_BSS_PAD))
goto nla_put_failure;
switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
if (nla_put_u32(msg, NL80211_BSS_SIGNAL_MBM, res->signal))
goto nla_put_failure;
break;
case CFG80211_SIGNAL_TYPE_UNSPEC:
if (nla_put_u8(msg, NL80211_BSS_SIGNAL_UNSPEC, res->signal))
goto nla_put_failure;
break;
default:
break;
}
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
if (intbss == wdev->current_bss &&
nla_put_u32(msg, NL80211_BSS_STATUS,
NL80211_BSS_STATUS_ASSOCIATED))
goto nla_put_failure;
break;
case NL80211_IFTYPE_ADHOC:
if (intbss == wdev->current_bss &&
nla_put_u32(msg, NL80211_BSS_STATUS,
NL80211_BSS_STATUS_IBSS_JOINED))
goto nla_put_failure;
break;
default:
break;
}
nla_nest_end(msg, bss);
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
fail_unlock_rcu:
rcu_read_unlock();
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_scan(struct sk_buff *skb, struct netlink_callback *cb)
{
struct cfg80211_registered_device *rdev;
struct cfg80211_internal_bss *scan;
struct wireless_dev *wdev;
int start = cb->args[2], idx = 0;
int err;
rtnl_lock();
err = nl80211_prepare_wdev_dump(skb, cb, &rdev, &wdev);
if (err) {
rtnl_unlock();
return err;
}
wdev_lock(wdev);
spin_lock_bh(&rdev->bss_lock);
cfg80211_bss_expire(rdev);
cb->seq = rdev->bss_generation;
list_for_each_entry(scan, &rdev->bss_list, list) {
if (++idx <= start)
continue;
if (nl80211_send_bss(skb, cb,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
rdev, wdev, scan) < 0) {
idx--;
break;
}
}
spin_unlock_bh(&rdev->bss_lock);
wdev_unlock(wdev);
cb->args[2] = idx;
rtnl_unlock();
return skb->len;
}
static int nl80211_send_survey(struct sk_buff *msg, u32 portid, u32 seq,
int flags, struct net_device *dev,
bool allow_radio_stats,
struct survey_info *survey)
{
void *hdr;
struct nlattr *infoattr;
/* skip radio stats if userspace didn't request them */
if (!survey->channel && !allow_radio_stats)
return 0;
hdr = nl80211hdr_put(msg, portid, seq, flags,
NL80211_CMD_NEW_SURVEY_RESULTS);
if (!hdr)
return -ENOMEM;
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex))
goto nla_put_failure;
infoattr = nla_nest_start(msg, NL80211_ATTR_SURVEY_INFO);
if (!infoattr)
goto nla_put_failure;
if (survey->channel &&
nla_put_u32(msg, NL80211_SURVEY_INFO_FREQUENCY,
survey->channel->center_freq))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_NOISE_DBM) &&
nla_put_u8(msg, NL80211_SURVEY_INFO_NOISE, survey->noise))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_IN_USE) &&
nla_put_flag(msg, NL80211_SURVEY_INFO_IN_USE))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_TIME) &&
nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME,
survey->time, NL80211_SURVEY_INFO_PAD))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_TIME_BUSY) &&
nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_BUSY,
survey->time_busy, NL80211_SURVEY_INFO_PAD))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_TIME_EXT_BUSY) &&
nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_EXT_BUSY,
survey->time_ext_busy, NL80211_SURVEY_INFO_PAD))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_TIME_RX) &&
nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_RX,
survey->time_rx, NL80211_SURVEY_INFO_PAD))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_TIME_TX) &&
nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_TX,
survey->time_tx, NL80211_SURVEY_INFO_PAD))
goto nla_put_failure;
if ((survey->filled & SURVEY_INFO_TIME_SCAN) &&
nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_SCAN,
survey->time_scan, NL80211_SURVEY_INFO_PAD))
goto nla_put_failure;
nla_nest_end(msg, infoattr);
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
{
struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
struct survey_info survey;
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
int survey_idx = cb->args[2];
int res;
bool radio_stats;
rtnl_lock();
res = nl80211_prepare_wdev_dump(skb, cb, &rdev, &wdev);
if (res)
goto out_err;
/* prepare_wdev_dump parsed the attributes */
radio_stats = attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
if (!wdev->netdev) {
res = -EINVAL;
goto out_err;
}
if (!rdev->ops->dump_survey) {
res = -EOPNOTSUPP;
goto out_err;
}
while (1) {
res = rdev_dump_survey(rdev, wdev->netdev, survey_idx, &survey);
if (res == -ENOENT)
break;
if (res)
goto out_err;
/* don't send disabled channels, but do send non-channel data */
if (survey.channel &&
survey.channel->flags & IEEE80211_CHAN_DISABLED) {
survey_idx++;
continue;
}
if (nl80211_send_survey(skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
wdev->netdev, radio_stats, &survey) < 0)
goto out;
survey_idx++;
}
out:
cb->args[2] = survey_idx;
res = skb->len;
out_err:
rtnl_unlock();
return res;
}
static bool nl80211_valid_wpa_versions(u32 wpa_versions)
{
return !(wpa_versions & ~(NL80211_WPA_VERSION_1 |
NL80211_WPA_VERSION_2 |
NL80211_WPA_VERSION_3));
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct ieee80211_channel *chan;
const u8 *bssid, *ssid, *ie = NULL, *auth_data = NULL;
int err, ssid_len, ie_len = 0, auth_data_len = 0;
enum nl80211_auth_type auth_type;
struct key_parse key;
bool local_state_change;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_AUTH_TYPE])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_SSID])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
err = nl80211_parse_key(info, &key);
if (err)
return err;
if (key.idx >= 0) {
if (key.type != -1 && key.type != NL80211_KEYTYPE_GROUP)
return -EINVAL;
if (!key.p.key || !key.p.key_len)
return -EINVAL;
if ((key.p.cipher != WLAN_CIPHER_SUITE_WEP40 ||
key.p.key_len != WLAN_KEY_LEN_WEP40) &&
(key.p.cipher != WLAN_CIPHER_SUITE_WEP104 ||
key.p.key_len != WLAN_KEY_LEN_WEP104))
return -EINVAL;
if (key.idx > 3)
return -EINVAL;
} else {
key.p.key_len = 0;
key.p.key = NULL;
}
if (key.idx >= 0) {
int i;
bool ok = false;
for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) {
if (key.p.cipher == rdev->wiphy.cipher_suites[i]) {
ok = true;
break;
}
}
if (!ok)
return -EINVAL;
}
if (!rdev->ops->auth)
return -EOPNOTSUPP;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
chan = nl80211_get_valid_chan(&rdev->wiphy,
info->attrs[NL80211_ATTR_WIPHY_FREQ]);
if (!chan)
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
if (!nl80211_valid_auth_type(rdev, auth_type, NL80211_CMD_AUTHENTICATE))
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if ((auth_type == NL80211_AUTHTYPE_SAE ||
auth_type == NL80211_AUTHTYPE_FILS_SK ||
auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
auth_type == NL80211_AUTHTYPE_FILS_PK) &&
!info->attrs[NL80211_ATTR_AUTH_DATA])
return -EINVAL;
if (info->attrs[NL80211_ATTR_AUTH_DATA]) {
if (auth_type != NL80211_AUTHTYPE_SAE &&
auth_type != NL80211_AUTHTYPE_FILS_SK &&
auth_type != NL80211_AUTHTYPE_FILS_SK_PFS &&
auth_type != NL80211_AUTHTYPE_FILS_PK)
return -EINVAL;
auth_data = nla_data(info->attrs[NL80211_ATTR_AUTH_DATA]);
auth_data_len = nla_len(info->attrs[NL80211_ATTR_AUTH_DATA]);
/* need to include at least Auth Transaction and Status Code */
if (auth_data_len < 4)
return -EINVAL;
}
local_state_change = !!info->attrs[NL80211_ATTR_LOCAL_STATE_CHANGE];
/*
* Since we no longer track auth state, ignore
* requests to only change local state.
*/
if (local_state_change)
return 0;
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_mlme_auth(rdev, dev, chan, auth_type, bssid,
ssid, ssid_len, ie, ie_len,
key.p.key, key.p.key_len, key.idx,
auth_data, auth_data_len);
wdev_unlock(dev->ieee80211_ptr);
return err;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
struct genl_info *info,
struct cfg80211_crypto_settings *settings,
int cipher_limit)
{
memset(settings, 0, sizeof(*settings));
settings->control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
if (info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) {
u16 proto;
proto = nla_get_u16(
info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
settings->control_port_ethertype = cpu_to_be16(proto);
if (!(rdev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) &&
proto != ETH_P_PAE)
return -EINVAL;
if (info->attrs[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT])
settings->control_port_no_encrypt = true;
} else
settings->control_port_ethertype = cpu_to_be16(ETH_P_PAE);
if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) {
void *data;
int len, i;
data = nla_data(info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]);
len = nla_len(info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]);
settings->n_ciphers_pairwise = len / sizeof(u32);
if (len % sizeof(u32))
return -EINVAL;
if (settings->n_ciphers_pairwise > cipher_limit)
return -EINVAL;
memcpy(settings->ciphers_pairwise, data, len);
for (i = 0; i < settings->n_ciphers_pairwise; i++)
if (!cfg80211_supported_cipher_suite(
&rdev->wiphy,
settings->ciphers_pairwise[i]))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_CIPHER_SUITE_GROUP]) {
settings->cipher_group =
nla_get_u32(info->attrs[NL80211_ATTR_CIPHER_SUITE_GROUP]);
if (!cfg80211_supported_cipher_suite(&rdev->wiphy,
settings->cipher_group))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_WPA_VERSIONS]) {
settings->wpa_versions =
nla_get_u32(info->attrs[NL80211_ATTR_WPA_VERSIONS]);
if (!nl80211_valid_wpa_versions(settings->wpa_versions))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_AKM_SUITES]) {
void *data;
int len;
data = nla_data(info->attrs[NL80211_ATTR_AKM_SUITES]);
len = nla_len(info->attrs[NL80211_ATTR_AKM_SUITES]);
settings->n_akm_suites = len / sizeof(u32);
if (len % sizeof(u32))
return -EINVAL;
if (settings->n_akm_suites > NL80211_MAX_NR_AKM_SUITES)
return -EINVAL;
memcpy(settings->akm_suites, data, len);
}
if (info->attrs[NL80211_ATTR_PMK]) {
if (nla_len(info->attrs[NL80211_ATTR_PMK]) != WLAN_PMK_LEN)
return -EINVAL;
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK))
return -EINVAL;
settings->psk = nla_data(info->attrs[NL80211_ATTR_PMK]);
}
if (info->attrs[NL80211_ATTR_SAE_PASSWORD]) {
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_SAE_OFFLOAD))
return -EINVAL;
settings->sae_pwd =
nla_data(info->attrs[NL80211_ATTR_SAE_PASSWORD]);
settings->sae_pwd_len =
nla_len(info->attrs[NL80211_ATTR_SAE_PASSWORD]);
}
return 0;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
struct ieee80211_channel *chan;
struct cfg80211_assoc_request req = {};
const u8 *bssid, *ssid;
int err, ssid_len = 0;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC] ||
!info->attrs[NL80211_ATTR_SSID] ||
!info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
if (!rdev->ops->assoc)
return -EOPNOTSUPP;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
chan = nl80211_get_valid_chan(&rdev->wiphy,
info->attrs[NL80211_ATTR_WIPHY_FREQ]);
if (!chan)
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (info->attrs[NL80211_ATTR_IE]) {
req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
if (info->attrs[NL80211_ATTR_USE_MFP]) {
enum nl80211_mfp mfp =
nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]);
if (mfp == NL80211_MFP_REQUIRED)
req.use_mfp = true;
else if (mfp != NL80211_MFP_NO)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_PREV_BSSID])
req.prev_bssid = nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]);
if (nla_get_flag(info->attrs[NL80211_ATTR_DISABLE_HT]))
req.flags |= ASSOC_REQ_DISABLE_HT;
if (info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
memcpy(&req.ht_capa_mask,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]),
sizeof(req.ht_capa_mask));
if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) {
if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
return -EINVAL;
memcpy(&req.ht_capa,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]),
sizeof(req.ht_capa));
}
if (nla_get_flag(info->attrs[NL80211_ATTR_DISABLE_VHT]))
req.flags |= ASSOC_REQ_DISABLE_VHT;
if (info->attrs[NL80211_ATTR_VHT_CAPABILITY_MASK])
memcpy(&req.vht_capa_mask,
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY_MASK]),
sizeof(req.vht_capa_mask));
if (info->attrs[NL80211_ATTR_VHT_CAPABILITY]) {
if (!info->attrs[NL80211_ATTR_VHT_CAPABILITY_MASK])
return -EINVAL;
memcpy(&req.vht_capa,
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]),
sizeof(req.vht_capa));
}
if (nla_get_flag(info->attrs[NL80211_ATTR_USE_RRM])) {
if (!((rdev->wiphy.features &
NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES) &&
(rdev->wiphy.features & NL80211_FEATURE_QUIET)) &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_RRM))
return -EINVAL;
req.flags |= ASSOC_REQ_USE_RRM;
}
if (info->attrs[NL80211_ATTR_FILS_KEK]) {
req.fils_kek = nla_data(info->attrs[NL80211_ATTR_FILS_KEK]);
req.fils_kek_len = nla_len(info->attrs[NL80211_ATTR_FILS_KEK]);
if (!info->attrs[NL80211_ATTR_FILS_NONCES])
return -EINVAL;
req.fils_nonces =
nla_data(info->attrs[NL80211_ATTR_FILS_NONCES]);
}
err = nl80211_crypto_settings(rdev, info, &req.crypto, 1);
if (!err) {
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_mlme_assoc(rdev, dev, chan, bssid,
ssid, ssid_len, &req);
if (!err && info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
dev->ieee80211_ptr->conn_owner_nlportid =
info->snd_portid;
memcpy(dev->ieee80211_ptr->disconnect_bssid,
bssid, ETH_ALEN);
}
wdev_unlock(dev->ieee80211_ptr);
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
return err;
}
static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
const u8 *ie = NULL, *bssid;
int ie_len = 0, err;
u16 reason_code;
bool local_state_change;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_REASON_CODE])
return -EINVAL;
if (!rdev->ops->deauth)
return -EOPNOTSUPP;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (reason_code == 0) {
/* Reason Code 0 is reserved */
return -EINVAL;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
local_state_change = !!info->attrs[NL80211_ATTR_LOCAL_STATE_CHANGE];
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_mlme_deauth(rdev, dev, bssid, ie, ie_len, reason_code,
local_state_change);
wdev_unlock(dev->ieee80211_ptr);
return err;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
const u8 *ie = NULL, *bssid;
int ie_len = 0, err;
u16 reason_code;
bool local_state_change;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_REASON_CODE])
return -EINVAL;
if (!rdev->ops->disassoc)
return -EOPNOTSUPP;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (reason_code == 0) {
/* Reason Code 0 is reserved */
return -EINVAL;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
local_state_change = !!info->attrs[NL80211_ATTR_LOCAL_STATE_CHANGE];
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_mlme_disassoc(rdev, dev, bssid, ie, ie_len, reason_code,
local_state_change);
wdev_unlock(dev->ieee80211_ptr);
return err;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
}
static bool
nl80211_parse_mcast_rate(struct cfg80211_registered_device *rdev,
int mcast_rate[NUM_NL80211_BANDS],
int rateval)
{
struct wiphy *wiphy = &rdev->wiphy;
bool found = false;
int band, i;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = wiphy->bands[band];
if (!sband)
continue;
for (i = 0; i < sband->n_bitrates; i++) {
if (sband->bitrates[i].bitrate == rateval) {
mcast_rate[band] = i + 1;
found = true;
break;
}
}
}
return found;
}
static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct cfg80211_ibss_params ibss;
struct wiphy *wiphy;
struct cfg80211_cached_keys *connkeys = NULL;
int err;
memset(&ibss, 0, sizeof(ibss));
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_SSID] ||
!nla_len(info->attrs[NL80211_ATTR_SSID]))
return -EINVAL;
ibss.beacon_interval = 100;
if (info->attrs[NL80211_ATTR_BEACON_INTERVAL])
ibss.beacon_interval =
nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
err = cfg80211_validate_beacon_int(rdev, NL80211_IFTYPE_ADHOC,
ibss.beacon_interval);
if (err)
return err;
if (!rdev->ops->join_ibss)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
wiphy = &rdev->wiphy;
if (info->attrs[NL80211_ATTR_MAC]) {
ibss.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (!is_valid_ether_addr(ibss.bssid))
return -EINVAL;
}
ibss.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
ibss.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
if (info->attrs[NL80211_ATTR_IE]) {
ibss.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ibss.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
err = nl80211_parse_chandef(rdev, info, &ibss.chandef);
if (err)
return err;
if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef,
NL80211_IFTYPE_ADHOC))
return -EINVAL;
switch (ibss.chandef.width) {
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
case NL80211_CHAN_WIDTH_20_NOHT:
break;
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_40:
if (!(rdev->wiphy.features & NL80211_FEATURE_HT_IBSS))
return -EINVAL;
break;
case NL80211_CHAN_WIDTH_80:
case NL80211_CHAN_WIDTH_80P80:
case NL80211_CHAN_WIDTH_160:
if (!(rdev->wiphy.features & NL80211_FEATURE_HT_IBSS))
return -EINVAL;
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_VHT_IBSS))
return -EINVAL;
break;
default:
return -EINVAL;
}
ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
ibss.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
u8 *rates =
nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
int n_rates =
nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
struct ieee80211_supported_band *sband =
wiphy->bands[ibss.chandef.chan->band];
err = ieee80211_get_ratemask(sband, rates, n_rates,
&ibss.basic_rates);
if (err)
return err;
}
if (info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
memcpy(&ibss.ht_capa_mask,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]),
sizeof(ibss.ht_capa_mask));
if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) {
if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
return -EINVAL;
memcpy(&ibss.ht_capa,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]),
sizeof(ibss.ht_capa));
}
if (info->attrs[NL80211_ATTR_MCAST_RATE] &&
!nl80211_parse_mcast_rate(rdev, ibss.mcast_rate,
nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE])))
return -EINVAL;
if (ibss.privacy && info->attrs[NL80211_ATTR_KEYS]) {
bool no_ht = false;
connkeys = nl80211_parse_connkeys(rdev,
info->attrs[NL80211_ATTR_KEYS],
&no_ht);
if (IS_ERR(connkeys))
return PTR_ERR(connkeys);
if ((ibss.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) &&
no_ht) {
kzfree(connkeys);
return -EINVAL;
}
}
ibss.control_port =
nla_get_flag(info->attrs[NL80211_ATTR_CONTROL_PORT]);
ibss.userspace_handles_dfs =
nla_get_flag(info->attrs[NL80211_ATTR_HANDLE_DFS]);
err = cfg80211_join_ibss(rdev, dev, &ibss, connkeys);
if (err)
kzfree(connkeys);
return err;
}
static int nl80211_leave_ibss(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
if (!rdev->ops->leave_ibss)
return -EOPNOTSUPP;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
return cfg80211_leave_ibss(rdev, dev, false);
}
static int nl80211_set_mcast_rate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
int mcast_rate[NUM_NL80211_BANDS];
u32 nla_rate;
int err;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
return -EOPNOTSUPP;
if (!rdev->ops->set_mcast_rate)
return -EOPNOTSUPP;
memset(mcast_rate, 0, sizeof(mcast_rate));
if (!info->attrs[NL80211_ATTR_MCAST_RATE])
return -EINVAL;
nla_rate = nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE]);
if (!nl80211_parse_mcast_rate(rdev, mcast_rate, nla_rate))
return -EINVAL;
err = rdev_set_mcast_rate(rdev, dev, mcast_rate);
return err;
}
static struct sk_buff *
__cfg80211_alloc_vendor_skb(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, int approxlen,
u32 portid, u32 seq, enum nl80211_commands cmd,
enum nl80211_attrs attr,
const struct nl80211_vendor_cmd_info *info,
gfp_t gfp)
{
struct sk_buff *skb;
void *hdr;
struct nlattr *data;
skb = nlmsg_new(approxlen + 100, gfp);
if (!skb)
return NULL;
hdr = nl80211hdr_put(skb, portid, seq, 0, cmd);
if (!hdr) {
kfree_skb(skb);
return NULL;
}
if (nla_put_u32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx))
goto nla_put_failure;
if (info) {
if (nla_put_u32(skb, NL80211_ATTR_VENDOR_ID,
info->vendor_id))
goto nla_put_failure;
if (nla_put_u32(skb, NL80211_ATTR_VENDOR_SUBCMD,
info->subcmd))
goto nla_put_failure;
}
if (wdev) {
if (nla_put_u64_64bit(skb, NL80211_ATTR_WDEV,
wdev_id(wdev), NL80211_ATTR_PAD))
goto nla_put_failure;
if (wdev->netdev &&
nla_put_u32(skb, NL80211_ATTR_IFINDEX,
wdev->netdev->ifindex))
goto nla_put_failure;
}
data = nla_nest_start(skb, attr);
if (!data)
goto nla_put_failure;
((void **)skb->cb)[0] = rdev;
((void **)skb->cb)[1] = hdr;
((void **)skb->cb)[2] = data;
return skb;
nla_put_failure:
kfree_skb(skb);
return NULL;
}
struct sk_buff *__cfg80211_alloc_event_skb(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_commands cmd,
enum nl80211_attrs attr,
int vendor_event_idx,
int approxlen, gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
const struct nl80211_vendor_cmd_info *info;
switch (cmd) {
case NL80211_CMD_TESTMODE:
if (WARN_ON(vendor_event_idx != -1))
return NULL;
info = NULL;
break;
case NL80211_CMD_VENDOR:
if (WARN_ON(vendor_event_idx < 0 ||
vendor_event_idx >= wiphy->n_vendor_events))
return NULL;
info = &wiphy->vendor_events[vendor_event_idx];
break;
default:
WARN_ON(1);
return NULL;
}
return __cfg80211_alloc_vendor_skb(rdev, wdev, approxlen, 0, 0,
cmd, attr, info, gfp);
}
EXPORT_SYMBOL(__cfg80211_alloc_event_skb);
void __cfg80211_send_event_skb(struct sk_buff *skb, gfp_t gfp)
{
struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
enum nl80211_multicast_groups mcgrp = NL80211_MCGRP_TESTMODE;
/* clear CB data for netlink core to own from now on */
memset(skb->cb, 0, sizeof(skb->cb));
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
if (data->nla_type == NL80211_ATTR_VENDOR_DATA)
mcgrp = NL80211_MCGRP_VENDOR;
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), skb, 0,
mcgrp, gfp);
}
EXPORT_SYMBOL(__cfg80211_send_event_skb);
#ifdef CONFIG_NL80211_TESTMODE
static int nl80211_testmode_do(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev =
__cfg80211_wdev_from_attrs(genl_info_net(info), info->attrs);
int err;
if (!rdev->ops->testmode_cmd)
return -EOPNOTSUPP;
if (IS_ERR(wdev)) {
err = PTR_ERR(wdev);
if (err != -EINVAL)
return err;
wdev = NULL;
} else if (wdev->wiphy != &rdev->wiphy) {
return -EINVAL;
}
if (!info->attrs[NL80211_ATTR_TESTDATA])
return -EINVAL;
rdev->cur_cmd_info = info;
err = rdev_testmode_cmd(rdev, wdev,
nla_data(info->attrs[NL80211_ATTR_TESTDATA]),
nla_len(info->attrs[NL80211_ATTR_TESTDATA]));
rdev->cur_cmd_info = NULL;
return err;
}
static int nl80211_testmode_dump(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct cfg80211_registered_device *rdev;
int err;
long phy_idx;
void *data = NULL;
int data_len = 0;
rtnl_lock();
if (cb->args[0]) {
/*
* 0 is a valid index, but not valid for args[0],
* so we need to offset by 1.
*/
phy_idx = cb->args[0] - 1;
rdev = cfg80211_rdev_by_wiphy_idx(phy_idx);
if (!rdev) {
err = -ENOENT;
goto out_err;
}
} else {
struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
attrbuf, nl80211_fam.maxattr,
nl80211_policy, NULL);
if (err)
goto out_err;
rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
goto out_err;
}
phy_idx = rdev->wiphy_idx;
if (attrbuf[NL80211_ATTR_TESTDATA])
cb->args[1] = (long)attrbuf[NL80211_ATTR_TESTDATA];
}
if (cb->args[1]) {
data = nla_data((void *)cb->args[1]);
data_len = nla_len((void *)cb->args[1]);
}
if (!rdev->ops->testmode_dump) {
err = -EOPNOTSUPP;
goto out_err;
}
while (1) {
void *hdr = nl80211hdr_put(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
NL80211_CMD_TESTMODE);
struct nlattr *tmdata;
if (!hdr)
break;
if (nla_put_u32(skb, NL80211_ATTR_WIPHY, phy_idx)) {
genlmsg_cancel(skb, hdr);
break;
}
tmdata = nla_nest_start(skb, NL80211_ATTR_TESTDATA);
if (!tmdata) {
genlmsg_cancel(skb, hdr);
break;
}
err = rdev_testmode_dump(rdev, skb, cb, data, data_len);
nla_nest_end(skb, tmdata);
if (err == -ENOBUFS || err == -ENOENT) {
genlmsg_cancel(skb, hdr);
break;
} else if (err) {
genlmsg_cancel(skb, hdr);
goto out_err;
}
genlmsg_end(skb, hdr);
}
err = skb->len;
/* see above */
cb->args[0] = phy_idx + 1;
out_err:
rtnl_unlock();
return err;
}
#endif
static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct cfg80211_connect_params connect;
struct wiphy *wiphy;
struct cfg80211_cached_keys *connkeys = NULL;
int err;
memset(&connect, 0, sizeof(connect));
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_SSID] ||
!nla_len(info->attrs[NL80211_ATTR_SSID]))
return -EINVAL;
if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
connect.auth_type =
nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
if (!nl80211_valid_auth_type(rdev, connect.auth_type,
NL80211_CMD_CONNECT))
return -EINVAL;
} else
connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
connect.privacy = info->attrs[NL80211_ATTR_PRIVACY];
if (info->attrs[NL80211_ATTR_WANT_1X_4WAY_HS] &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X))
return -EINVAL;
connect.want_1x = info->attrs[NL80211_ATTR_WANT_1X_4WAY_HS];
err = nl80211_crypto_settings(rdev, info, &connect.crypto,
NL80211_MAX_NR_CIPHER_SUITES);
if (err)
return err;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
wiphy = &rdev->wiphy;
connect.bg_scan_period = -1;
if (info->attrs[NL80211_ATTR_BG_SCAN_PERIOD] &&
(wiphy->flags & WIPHY_FLAG_SUPPORTS_FW_ROAM)) {
connect.bg_scan_period =
nla_get_u16(info->attrs[NL80211_ATTR_BG_SCAN_PERIOD]);
}
if (info->attrs[NL80211_ATTR_MAC])
connect.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
else if (info->attrs[NL80211_ATTR_MAC_HINT])
connect.bssid_hint =
nla_data(info->attrs[NL80211_ATTR_MAC_HINT]);
connect.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
connect.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
if (info->attrs[NL80211_ATTR_IE]) {
connect.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
if (info->attrs[NL80211_ATTR_USE_MFP]) {
connect.mfp = nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]);
if (connect.mfp != NL80211_MFP_REQUIRED &&
connect.mfp != NL80211_MFP_NO)
return -EINVAL;
} else {
connect.mfp = NL80211_MFP_NO;
}
if (info->attrs[NL80211_ATTR_PREV_BSSID])
connect.prev_bssid =
nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]);
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
connect.channel = nl80211_get_valid_chan(
wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ]);
if (!connect.channel)
return -EINVAL;
} else if (info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]) {
connect.channel_hint = nl80211_get_valid_chan(
wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]);
if (!connect.channel_hint)
return -EINVAL;
}
if (connect.privacy && info->attrs[NL80211_ATTR_KEYS]) {
connkeys = nl80211_parse_connkeys(rdev,
info->attrs[NL80211_ATTR_KEYS], NULL);
if (IS_ERR(connkeys))
return PTR_ERR(connkeys);
}
if (nla_get_flag(info->attrs[NL80211_ATTR_DISABLE_HT]))
connect.flags |= ASSOC_REQ_DISABLE_HT;
if (info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
memcpy(&connect.ht_capa_mask,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]),
sizeof(connect.ht_capa_mask));
if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) {
if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]) {
kzfree(connkeys);
return -EINVAL;
}
memcpy(&connect.ht_capa,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]),
sizeof(connect.ht_capa));
}
if (nla_get_flag(info->attrs[NL80211_ATTR_DISABLE_VHT]))
connect.flags |= ASSOC_REQ_DISABLE_VHT;
if (info->attrs[NL80211_ATTR_VHT_CAPABILITY_MASK])
memcpy(&connect.vht_capa_mask,
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY_MASK]),
sizeof(connect.vht_capa_mask));
if (info->attrs[NL80211_ATTR_VHT_CAPABILITY]) {
if (!info->attrs[NL80211_ATTR_VHT_CAPABILITY_MASK]) {
kzfree(connkeys);
return -EINVAL;
}
memcpy(&connect.vht_capa,
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]),
sizeof(connect.vht_capa));
}
if (nla_get_flag(info->attrs[NL80211_ATTR_USE_RRM])) {
if (!((rdev->wiphy.features &
NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES) &&
(rdev->wiphy.features & NL80211_FEATURE_QUIET)) &&
!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_RRM)) {
kzfree(connkeys);
return -EINVAL;
}
connect.flags |= ASSOC_REQ_USE_RRM;
}
connect.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]);
if (connect.pbss && !rdev->wiphy.bands[NL80211_BAND_60GHZ]) {
kzfree(connkeys);
return -EOPNOTSUPP;
}
if (info->attrs[NL80211_ATTR_BSS_SELECT]) {
/* bss selection makes no sense if bssid is set */
if (connect.bssid) {
kzfree(connkeys);
return -EINVAL;
}
err = parse_bss_select(info->attrs[NL80211_ATTR_BSS_SELECT],
wiphy, &connect.bss_select);
if (err) {
kzfree(connkeys);
return err;
}
}
if (wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_FILS_SK_OFFLOAD) &&
info->attrs[NL80211_ATTR_FILS_ERP_USERNAME] &&
info->attrs[NL80211_ATTR_FILS_ERP_REALM] &&
info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] &&
info->attrs[NL80211_ATTR_FILS_ERP_RRK]) {
connect.fils_erp_username =
nla_data(info->attrs[NL80211_ATTR_FILS_ERP_USERNAME]);
connect.fils_erp_username_len =
nla_len(info->attrs[NL80211_ATTR_FILS_ERP_USERNAME]);
connect.fils_erp_realm =
nla_data(info->attrs[NL80211_ATTR_FILS_ERP_REALM]);
connect.fils_erp_realm_len =
nla_len(info->attrs[NL80211_ATTR_FILS_ERP_REALM]);
connect.fils_erp_next_seq_num =
nla_get_u16(
info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM]);
connect.fils_erp_rrk =
nla_data(info->attrs[NL80211_ATTR_FILS_ERP_RRK]);
connect.fils_erp_rrk_len =
nla_len(info->attrs[NL80211_ATTR_FILS_ERP_RRK]);
} else if (info->attrs[NL80211_ATTR_FILS_ERP_USERNAME] ||
info->attrs[NL80211_ATTR_FILS_ERP_REALM] ||
info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] ||
info->attrs[NL80211_ATTR_FILS_ERP_RRK]) {
kzfree(connkeys);
return -EINVAL;
}
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_connect(rdev, dev, &connect, connkeys,
connect.prev_bssid);
if (err)
kzfree(connkeys);
if (!err && info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
dev->ieee80211_ptr->conn_owner_nlportid = info->snd_portid;
if (connect.bssid)
memcpy(dev->ieee80211_ptr->disconnect_bssid,
connect.bssid, ETH_ALEN);
else
memset(dev->ieee80211_ptr->disconnect_bssid,
0, ETH_ALEN);
}
wdev_unlock(dev->ieee80211_ptr);
return err;
}
static int nl80211_update_connect_params(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_connect_params connect = {};
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
u32 changed = 0;
int ret;
if (!rdev->ops->update_connect_params)
return -EOPNOTSUPP;
if (info->attrs[NL80211_ATTR_IE]) {
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
connect.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
changed |= UPDATE_ASSOC_IES;
}
wdev_lock(dev->ieee80211_ptr);
if (!wdev->current_bss)
ret = -ENOLINK;
else
ret = rdev_update_connect_params(rdev, dev, &connect, changed);
wdev_unlock(dev->ieee80211_ptr);
return ret;
}
static int nl80211_disconnect(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
u16 reason;
int ret;
if (!info->attrs[NL80211_ATTR_REASON_CODE])
reason = WLAN_REASON_DEAUTH_LEAVING;
else
reason = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (reason == 0)
return -EINVAL;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
wdev_lock(dev->ieee80211_ptr);
ret = cfg80211_disconnect(rdev, dev, reason, true);
wdev_unlock(dev->ieee80211_ptr);
return ret;
}
static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net *net;
int err;
if (info->attrs[NL80211_ATTR_PID]) {
u32 pid = nla_get_u32(info->attrs[NL80211_ATTR_PID]);
net = get_net_ns_by_pid(pid);
} else if (info->attrs[NL80211_ATTR_NETNS_FD]) {
u32 fd = nla_get_u32(info->attrs[NL80211_ATTR_NETNS_FD]);
net = get_net_ns_by_fd(fd);
} else {
return -EINVAL;
}
if (IS_ERR(net))
return PTR_ERR(net);
err = 0;
/* check if anything to do */
if (!net_eq(wiphy_net(&rdev->wiphy), net))
err = cfg80211_switch_netns(rdev, net);
put_net(net);
return err;
}
static int nl80211_setdel_pmksa(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
int (*rdev_ops)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_pmksa *pmksa) = NULL;
struct net_device *dev = info->user_ptr[1];
struct cfg80211_pmksa pmksa;
memset(&pmksa, 0, sizeof(struct cfg80211_pmksa));
if (!info->attrs[NL80211_ATTR_PMKID])
return -EINVAL;
pmksa.pmkid = nla_data(info->attrs[NL80211_ATTR_PMKID]);
if (info->attrs[NL80211_ATTR_MAC]) {
pmksa.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
} else if (info->attrs[NL80211_ATTR_SSID] &&
info->attrs[NL80211_ATTR_FILS_CACHE_ID] &&
(info->genlhdr->cmd == NL80211_CMD_DEL_PMKSA ||
info->attrs[NL80211_ATTR_PMK])) {
pmksa.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
pmksa.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
pmksa.cache_id =
nla_data(info->attrs[NL80211_ATTR_FILS_CACHE_ID]);
} else {
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_PMK]) {
pmksa.pmk = nla_data(info->attrs[NL80211_ATTR_PMK]);
pmksa.pmk_len = nla_len(info->attrs[NL80211_ATTR_PMK]);
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
switch (info->genlhdr->cmd) {
case NL80211_CMD_SET_PMKSA:
rdev_ops = rdev->ops->set_pmksa;
break;
case NL80211_CMD_DEL_PMKSA:
rdev_ops = rdev->ops->del_pmksa;
break;
default:
WARN_ON(1);
break;
}
if (!rdev_ops)
return -EOPNOTSUPP;
return rdev_ops(&rdev->wiphy, dev, &pmksa);
}
static int nl80211_flush_pmksa(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
if (!rdev->ops->flush_pmksa)
return -EOPNOTSUPP;
return rdev_flush_pmksa(rdev, dev);
}
static int nl80211_tdls_mgmt(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
u8 action_code, dialog_token;
u32 peer_capability = 0;
u16 status_code;
u8 *peer;
bool initiator;
if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
!rdev->ops->tdls_mgmt)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_TDLS_ACTION] ||
!info->attrs[NL80211_ATTR_STATUS_CODE] ||
!info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN] ||
!info->attrs[NL80211_ATTR_IE] ||
!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
action_code = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_ACTION]);
status_code = nla_get_u16(info->attrs[NL80211_ATTR_STATUS_CODE]);
dialog_token = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN]);
initiator = nla_get_flag(info->attrs[NL80211_ATTR_TDLS_INITIATOR]);
if (info->attrs[NL80211_ATTR_TDLS_PEER_CAPABILITY])
peer_capability =
nla_get_u32(info->attrs[NL80211_ATTR_TDLS_PEER_CAPABILITY]);
return rdev_tdls_mgmt(rdev, dev, peer, action_code,
dialog_token, status_code, peer_capability,
initiator,
nla_data(info->attrs[NL80211_ATTR_IE]),
nla_len(info->attrs[NL80211_ATTR_IE]));
}
static int nl80211_tdls_oper(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
enum nl80211_tdls_operation operation;
u8 *peer;
if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
!rdev->ops->tdls_oper)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_TDLS_OPERATION] ||
!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
operation = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_OPERATION]);
peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
return rdev_tdls_oper(rdev, dev, peer, operation);
}
static int nl80211_remain_on_channel(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_chan_def chandef;
const struct cfg80211_chan_def *compat_chandef;
struct sk_buff *msg;
void *hdr;
u64 cookie;
u32 duration;
int err;
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
!info->attrs[NL80211_ATTR_DURATION])
return -EINVAL;
duration = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);
if (!rdev->ops->remain_on_channel ||
!(rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL))
return -EOPNOTSUPP;
/*
* We should be on that channel for at least a minimum amount of
* time (10ms) but no longer than the driver supports.
*/
if (duration < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
duration > rdev->wiphy.max_remain_on_channel_duration)
return -EINVAL;
err = nl80211_parse_chandef(rdev, info, &chandef);
if (err)
return err;
wdev_lock(wdev);
if (!cfg80211_off_channel_oper_allowed(wdev) &&
!cfg80211_chandef_identical(&wdev->chandef, &chandef)) {
compat_chandef = cfg80211_chandef_compatible(&wdev->chandef,
&chandef);
if (compat_chandef != &chandef) {
wdev_unlock(wdev);
return -EBUSY;
}
}
wdev_unlock(wdev);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_REMAIN_ON_CHANNEL);
if (!hdr) {
err = -ENOBUFS;
goto free_msg;
}
err = rdev_remain_on_channel(rdev, wdev, chandef.chan,
duration, &cookie);
if (err)
goto free_msg;
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
err = -ENOBUFS;
free_msg:
nlmsg_free(msg);
return err;
}
static int nl80211_cancel_remain_on_channel(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
u64 cookie;
if (!info->attrs[NL80211_ATTR_COOKIE])
return -EINVAL;
if (!rdev->ops->cancel_remain_on_channel)
return -EOPNOTSUPP;
cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
return rdev_cancel_remain_on_channel(rdev, wdev, cookie);
}
static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_bitrate_mask mask;
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
int err;
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
err = nl80211_parse_tx_bitrate_mask(info, &mask);
if (err)
return err;
return rdev_set_bitrate_mask(rdev, dev, NULL, &mask);
}
static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
u16 frame_type = IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION;
if (!info->attrs[NL80211_ATTR_FRAME_MATCH])
return -EINVAL;
if (info->attrs[NL80211_ATTR_FRAME_TYPE])
frame_type = nla_get_u16(info->attrs[NL80211_ATTR_FRAME_TYPE]);
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_P2P_DEVICE:
break;
case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
/* not much point in registering if we can't reply */
if (!rdev->ops->mgmt_tx)
return -EOPNOTSUPP;
return cfg80211_mlme_register_mgmt(wdev, info->snd_portid, frame_type,
nla_data(info->attrs[NL80211_ATTR_FRAME_MATCH]),
nla_len(info->attrs[NL80211_ATTR_FRAME_MATCH]));
}
static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_chan_def chandef;
int err;
void *hdr = NULL;
u64 cookie;
struct sk_buff *msg = NULL;
struct cfg80211_mgmt_tx_params params = {
.dont_wait_for_ack =
info->attrs[NL80211_ATTR_DONT_WAIT_FOR_ACK],
};
if (!info->attrs[NL80211_ATTR_FRAME])
return -EINVAL;
if (!rdev->ops->mgmt_tx)
return -EOPNOTSUPP;
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
break;
case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
if (info->attrs[NL80211_ATTR_DURATION]) {
if (!(rdev->wiphy.flags & WIPHY_FLAG_OFFCHAN_TX))
return -EINVAL;
params.wait = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);
/*
* We should wait on the channel for at least a minimum amount
* of time (10ms) but no longer than the driver supports.
*/
if (params.wait < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
params.wait > rdev->wiphy.max_remain_on_channel_duration)
return -EINVAL;
}
params.offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
if (params.offchan && !(rdev->wiphy.flags & WIPHY_FLAG_OFFCHAN_TX))
return -EINVAL;
params.no_cck = nla_get_flag(info->attrs[NL80211_ATTR_TX_NO_CCK_RATE]);
/* get the channel if any has been specified, otherwise pass NULL to
* the driver. The latter will use the current one
*/
chandef.chan = NULL;
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
err = nl80211_parse_chandef(rdev, info, &chandef);
if (err)
return err;
}
if (!chandef.chan && params.offchan)
return -EINVAL;
wdev_lock(wdev);
if (params.offchan && !cfg80211_off_channel_oper_allowed(wdev)) {
wdev_unlock(wdev);
return -EBUSY;
}
wdev_unlock(wdev);
params.buf = nla_data(info->attrs[NL80211_ATTR_FRAME]);
params.len = nla_len(info->attrs[NL80211_ATTR_FRAME]);
if (info->attrs[NL80211_ATTR_CSA_C_OFFSETS_TX]) {
int len = nla_len(info->attrs[NL80211_ATTR_CSA_C_OFFSETS_TX]);
int i;
if (len % sizeof(u16))
return -EINVAL;
params.n_csa_offsets = len / sizeof(u16);
params.csa_offsets =
nla_data(info->attrs[NL80211_ATTR_CSA_C_OFFSETS_TX]);
/* check that all the offsets fit the frame */
for (i = 0; i < params.n_csa_offsets; i++) {
if (params.csa_offsets[i] >= params.len)
return -EINVAL;
}
}
if (!params.dont_wait_for_ack) {
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_FRAME);
if (!hdr) {
err = -ENOBUFS;
goto free_msg;
}
}
params.chan = chandef.chan;
err = cfg80211_mlme_mgmt_tx(rdev, wdev, &params, &cookie);
if (err)
goto free_msg;
if (msg) {
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
}
return 0;
nla_put_failure:
err = -ENOBUFS;
free_msg:
nlmsg_free(msg);
return err;
}
static int nl80211_tx_mgmt_cancel_wait(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
u64 cookie;
if (!info->attrs[NL80211_ATTR_COOKIE])
return -EINVAL;
if (!rdev->ops->mgmt_tx_cancel_wait)
return -EOPNOTSUPP;
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_P2P_DEVICE:
break;
case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
return rdev_mgmt_tx_cancel_wait(rdev, wdev, cookie);
}
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
static int nl80211_set_power_save(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
struct wireless_dev *wdev;
struct net_device *dev = info->user_ptr[1];
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
u8 ps_state;
bool state;
int err;
if (!info->attrs[NL80211_ATTR_PS_STATE])
return -EINVAL;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
ps_state = nla_get_u32(info->attrs[NL80211_ATTR_PS_STATE]);
if (ps_state != NL80211_PS_DISABLED && ps_state != NL80211_PS_ENABLED)
return -EINVAL;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
wdev = dev->ieee80211_ptr;
if (!rdev->ops->set_power_mgmt)
return -EOPNOTSUPP;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
state = (ps_state == NL80211_PS_ENABLED) ? true : false;
if (state == wdev->ps)
return 0;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
err = rdev_set_power_mgmt(rdev, dev, state, wdev->ps_timeout);
if (!err)
wdev->ps = state;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
return err;
}
static int nl80211_get_power_save(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
enum nl80211_ps_state ps_state;
struct wireless_dev *wdev;
struct net_device *dev = info->user_ptr[1];
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
struct sk_buff *msg;
void *hdr;
int err;
wdev = dev->ieee80211_ptr;
if (!rdev->ops->set_power_mgmt)
return -EOPNOTSUPP;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
NL80211_CMD_GET_POWER_SAVE);
if (!hdr) {
err = -ENOBUFS;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
goto free_msg;
}
if (wdev->ps)
ps_state = NL80211_PS_ENABLED;
else
ps_state = NL80211_PS_DISABLED;
if (nla_put_u32(msg, NL80211_ATTR_PS_STATE, ps_state))
goto nla_put_failure;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
nla_put_failure:
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
err = -ENOBUFS;
free_msg:
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
nlmsg_free(msg);
return err;
}
static const struct nla_policy
nl80211_attr_cqm_policy[NL80211_ATTR_CQM_MAX + 1] = {
[NL80211_ATTR_CQM_RSSI_THOLD] = { .type = NLA_BINARY },
[NL80211_ATTR_CQM_RSSI_HYST] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_TXE_RATE] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_TXE_PKTS] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_TXE_INTVL] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_RSSI_LEVEL] = { .type = NLA_S32 },
};
static int nl80211_set_cqm_txe(struct genl_info *info,
u32 rate, u32 pkts, u32 intvl)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
if (rate > 100 || intvl > NL80211_CQM_TXE_MAX_INTVL)
return -EINVAL;
if (!rdev->ops->set_cqm_txe_config)
return -EOPNOTSUPP;
if (wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
return rdev_set_cqm_txe_config(rdev, dev, rate, pkts, intvl);
}
static int cfg80211_cqm_rssi_update(struct cfg80211_registered_device *rdev,
struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
s32 last, low, high;
u32 hyst;
int i, n;
int err;
/* RSSI reporting disabled? */
if (!wdev->cqm_config)
return rdev_set_cqm_rssi_range_config(rdev, dev, 0, 0);
/*
* Obtain current RSSI value if possible, if not and no RSSI threshold
* event has been received yet, we should receive an event after a
* connection is established and enough beacons received to calculate
* the average.
*/
if (!wdev->cqm_config->last_rssi_event_value && wdev->current_bss &&
rdev->ops->get_station) {
struct station_info sinfo;
u8 *mac_addr;
mac_addr = wdev->current_bss->pub.bssid;
err = rdev_get_station(rdev, dev, mac_addr, &sinfo);
if (err)
return err;
if (sinfo.filled & BIT(NL80211_STA_INFO_BEACON_SIGNAL_AVG))
wdev->cqm_config->last_rssi_event_value =
(s8) sinfo.rx_beacon_signal_avg;
}
last = wdev->cqm_config->last_rssi_event_value;
hyst = wdev->cqm_config->rssi_hyst;
n = wdev->cqm_config->n_rssi_thresholds;
for (i = 0; i < n; i++)
if (last < wdev->cqm_config->rssi_thresholds[i])
break;
low = i > 0 ?
(wdev->cqm_config->rssi_thresholds[i - 1] - hyst) : S32_MIN;
high = i < n ?
(wdev->cqm_config->rssi_thresholds[i] + hyst - 1) : S32_MAX;
return rdev_set_cqm_rssi_range_config(rdev, dev, low, high);
}
static int nl80211_set_cqm_rssi(struct genl_info *info,
const s32 *thresholds, int n_thresholds,
u32 hysteresis)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
int i, err;
s32 prev = S32_MIN;
/* Check all values negative and sorted */
for (i = 0; i < n_thresholds; i++) {
if (thresholds[i] > 0 || thresholds[i] <= prev)
return -EINVAL;
prev = thresholds[i];
}
if (wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
wdev_lock(wdev);
cfg80211_cqm_config_free(wdev);
wdev_unlock(wdev);
if (n_thresholds <= 1 && rdev->ops->set_cqm_rssi_config) {
if (n_thresholds == 0 || thresholds[0] == 0) /* Disabling */
return rdev_set_cqm_rssi_config(rdev, dev, 0, 0);
return rdev_set_cqm_rssi_config(rdev, dev,
thresholds[0], hysteresis);
}
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_CQM_RSSI_LIST))
return -EOPNOTSUPP;
if (n_thresholds == 1 && thresholds[0] == 0) /* Disabling */
n_thresholds = 0;
wdev_lock(wdev);
if (n_thresholds) {
struct cfg80211_cqm_config *cqm_config;
cqm_config = kzalloc(sizeof(struct cfg80211_cqm_config) +
n_thresholds * sizeof(s32), GFP_KERNEL);
if (!cqm_config) {
err = -ENOMEM;
goto unlock;
}
cqm_config->rssi_hyst = hysteresis;
cqm_config->n_rssi_thresholds = n_thresholds;
memcpy(cqm_config->rssi_thresholds, thresholds,
n_thresholds * sizeof(s32));
wdev->cqm_config = cqm_config;
}
err = cfg80211_cqm_rssi_update(rdev, dev);
unlock:
wdev_unlock(wdev);
return err;
}
static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *attrs[NL80211_ATTR_CQM_MAX + 1];
struct nlattr *cqm;
int err;
cqm = info->attrs[NL80211_ATTR_CQM];
if (!cqm)
return -EINVAL;
err = nla_parse_nested(attrs, NL80211_ATTR_CQM_MAX, cqm,
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_attr_cqm_policy, info->extack);
if (err)
return err;
if (attrs[NL80211_ATTR_CQM_RSSI_THOLD] &&
attrs[NL80211_ATTR_CQM_RSSI_HYST]) {
const s32 *thresholds =
nla_data(attrs[NL80211_ATTR_CQM_RSSI_THOLD]);
int len = nla_len(attrs[NL80211_ATTR_CQM_RSSI_THOLD]);
u32 hysteresis = nla_get_u32(attrs[NL80211_ATTR_CQM_RSSI_HYST]);
if (len % 4)
return -EINVAL;
return nl80211_set_cqm_rssi(info, thresholds, len / 4,
hysteresis);
}
if (attrs[NL80211_ATTR_CQM_TXE_RATE] &&
attrs[NL80211_ATTR_CQM_TXE_PKTS] &&
attrs[NL80211_ATTR_CQM_TXE_INTVL]) {
u32 rate = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_RATE]);
u32 pkts = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_PKTS]);
u32 intvl = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_INTVL]);
return nl80211_set_cqm_txe(info, rate, pkts, intvl);
}
return -EINVAL;
}
static int nl80211_join_ocb(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct ocb_setup setup = {};
int err;
err = nl80211_parse_chandef(rdev, info, &setup.chandef);
if (err)
return err;
return cfg80211_join_ocb(rdev, dev, &setup);
}
static int nl80211_leave_ocb(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
return cfg80211_leave_ocb(rdev, dev);
}
static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct mesh_config cfg;
struct mesh_setup setup;
int err;
/* start with default */
memcpy(&cfg, &default_mesh_config, sizeof(cfg));
memcpy(&setup, &default_mesh_setup, sizeof(setup));
if (info->attrs[NL80211_ATTR_MESH_CONFIG]) {
/* and parse parameters if given */
err = nl80211_parse_mesh_config(info, &cfg, NULL);
if (err)
return err;
}
if (!info->attrs[NL80211_ATTR_MESH_ID] ||
!nla_len(info->attrs[NL80211_ATTR_MESH_ID]))
return -EINVAL;
setup.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
setup.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
if (info->attrs[NL80211_ATTR_MCAST_RATE] &&
!nl80211_parse_mcast_rate(rdev, setup.mcast_rate,
nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE])))
return -EINVAL;
if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
setup.beacon_interval =
nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
err = cfg80211_validate_beacon_int(rdev,
NL80211_IFTYPE_MESH_POINT,
setup.beacon_interval);
if (err)
return err;
}
if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) {
setup.dtim_period =
nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
if (setup.dtim_period < 1 || setup.dtim_period > 100)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_MESH_SETUP]) {
/* parse additional setup parameters if given */
err = nl80211_parse_mesh_setup(info, &setup);
if (err)
return err;
}
if (setup.user_mpm)
cfg.auto_open_plinks = false;
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
err = nl80211_parse_chandef(rdev, info, &setup.chandef);
if (err)
return err;
} else {
/* cfg80211_join_mesh() will sort it out */
setup.chandef.chan = NULL;
}
if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
u8 *rates = nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
int n_rates =
nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
struct ieee80211_supported_band *sband;
if (!setup.chandef.chan)
return -EINVAL;
sband = rdev->wiphy.bands[setup.chandef.chan->band];
err = ieee80211_get_ratemask(sband, rates, n_rates,
&setup.basic_rates);
if (err)
return err;
}
if (info->attrs[NL80211_ATTR_TX_RATES]) {
err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
if (err)
return err;
if (!setup.chandef.chan)
return -EINVAL;
err = validate_beacon_tx_rate(rdev, setup.chandef.chan->band,
&setup.beacon_rate);
if (err)
return err;
}
setup.userspace_handles_dfs =
nla_get_flag(info->attrs[NL80211_ATTR_HANDLE_DFS]);
return cfg80211_join_mesh(rdev, dev, &setup, &cfg);
}
static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
return cfg80211_leave_mesh(rdev, dev);
}
#ifdef CONFIG_PM
static int nl80211_send_wowlan_patterns(struct sk_buff *msg,
struct cfg80211_registered_device *rdev)
{
struct cfg80211_wowlan *wowlan = rdev->wiphy.wowlan_config;
struct nlattr *nl_pats, *nl_pat;
int i, pat_len;
if (!wowlan->n_patterns)
return 0;
nl_pats = nla_nest_start(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN);
if (!nl_pats)
return -ENOBUFS;
for (i = 0; i < wowlan->n_patterns; i++) {
nl_pat = nla_nest_start(msg, i + 1);
if (!nl_pat)
return -ENOBUFS;
pat_len = wowlan->patterns[i].pattern_len;
if (nla_put(msg, NL80211_PKTPAT_MASK, DIV_ROUND_UP(pat_len, 8),
wowlan->patterns[i].mask) ||
nla_put(msg, NL80211_PKTPAT_PATTERN, pat_len,
wowlan->patterns[i].pattern) ||
nla_put_u32(msg, NL80211_PKTPAT_OFFSET,
wowlan->patterns[i].pkt_offset))
return -ENOBUFS;
nla_nest_end(msg, nl_pat);
}
nla_nest_end(msg, nl_pats);
return 0;
}
static int nl80211_send_wowlan_tcp(struct sk_buff *msg,
struct cfg80211_wowlan_tcp *tcp)
{
struct nlattr *nl_tcp;
if (!tcp)
return 0;
nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION);
if (!nl_tcp)
return -ENOBUFS;
if (nla_put_in_addr(msg, NL80211_WOWLAN_TCP_SRC_IPV4, tcp->src) ||
nla_put_in_addr(msg, NL80211_WOWLAN_TCP_DST_IPV4, tcp->dst) ||
nla_put(msg, NL80211_WOWLAN_TCP_DST_MAC, ETH_ALEN, tcp->dst_mac) ||
nla_put_u16(msg, NL80211_WOWLAN_TCP_SRC_PORT, tcp->src_port) ||
nla_put_u16(msg, NL80211_WOWLAN_TCP_DST_PORT, tcp->dst_port) ||
nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
tcp->payload_len, tcp->payload) ||
nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL,
tcp->data_interval) ||
nla_put(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
tcp->wake_len, tcp->wake_data) ||
nla_put(msg, NL80211_WOWLAN_TCP_WAKE_MASK,
DIV_ROUND_UP(tcp->wake_len, 8), tcp->wake_mask))
return -ENOBUFS;
if (tcp->payload_seq.len &&
nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
sizeof(tcp->payload_seq), &tcp->payload_seq))
return -ENOBUFS;
if (tcp->payload_tok.len &&
nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
sizeof(tcp->payload_tok) + tcp->tokens_size,
&tcp->payload_tok))
return -ENOBUFS;
nla_nest_end(msg, nl_tcp);
return 0;
}
static int nl80211_send_wowlan_nd(struct sk_buff *msg,
struct cfg80211_sched_scan_request *req)
{
struct nlattr *nd, *freqs, *matches, *match, *scan_plans, *scan_plan;
int i;
if (!req)
return 0;
nd = nla_nest_start(msg, NL80211_WOWLAN_TRIG_NET_DETECT);
if (!nd)
return -ENOBUFS;
if (req->n_scan_plans == 1 &&
nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_INTERVAL,
req->scan_plans[0].interval * 1000))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_DELAY, req->delay))
return -ENOBUFS;
if (req->relative_rssi_set) {
struct nl80211_bss_select_rssi_adjust rssi_adjust;
if (nla_put_s8(msg, NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
req->relative_rssi))
return -ENOBUFS;
rssi_adjust.band = req->rssi_adjust.band;
rssi_adjust.delta = req->rssi_adjust.delta;
if (nla_put(msg, NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
sizeof(rssi_adjust), &rssi_adjust))
return -ENOBUFS;
}
freqs = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES);
if (!freqs)
return -ENOBUFS;
for (i = 0; i < req->n_channels; i++) {
if (nla_put_u32(msg, i, req->channels[i]->center_freq))
return -ENOBUFS;
}
nla_nest_end(msg, freqs);
if (req->n_match_sets) {
matches = nla_nest_start(msg, NL80211_ATTR_SCHED_SCAN_MATCH);
if (!matches)
return -ENOBUFS;
for (i = 0; i < req->n_match_sets; i++) {
match = nla_nest_start(msg, i);
if (!match)
return -ENOBUFS;
if (nla_put(msg, NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
req->match_sets[i].ssid.ssid_len,
req->match_sets[i].ssid.ssid))
return -ENOBUFS;
nla_nest_end(msg, match);
}
nla_nest_end(msg, matches);
}
scan_plans = nla_nest_start(msg, NL80211_ATTR_SCHED_SCAN_PLANS);
if (!scan_plans)
return -ENOBUFS;
for (i = 0; i < req->n_scan_plans; i++) {
scan_plan = nla_nest_start(msg, i + 1);
if (!scan_plan)
return -ENOBUFS;
if (!scan_plan ||
nla_put_u32(msg, NL80211_SCHED_SCAN_PLAN_INTERVAL,
req->scan_plans[i].interval) ||
(req->scan_plans[i].iterations &&
nla_put_u32(msg, NL80211_SCHED_SCAN_PLAN_ITERATIONS,
req->scan_plans[i].iterations)))
return -ENOBUFS;
nla_nest_end(msg, scan_plan);
}
nla_nest_end(msg, scan_plans);
nla_nest_end(msg, nd);
return 0;
}
static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct sk_buff *msg;
void *hdr;
u32 size = NLMSG_DEFAULT_SIZE;
if (!rdev->wiphy.wowlan)
return -EOPNOTSUPP;
if (rdev->wiphy.wowlan_config && rdev->wiphy.wowlan_config->tcp) {
/* adjust size to have room for all the data */
size += rdev->wiphy.wowlan_config->tcp->tokens_size +
rdev->wiphy.wowlan_config->tcp->payload_len +
rdev->wiphy.wowlan_config->tcp->wake_len +
rdev->wiphy.wowlan_config->tcp->wake_len / 8;
}
msg = nlmsg_new(size, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_GET_WOWLAN);
if (!hdr)
goto nla_put_failure;
if (rdev->wiphy.wowlan_config) {
struct nlattr *nl_wowlan;
nl_wowlan = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS);
if (!nl_wowlan)
goto nla_put_failure;
if ((rdev->wiphy.wowlan_config->any &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_ANY)) ||
(rdev->wiphy.wowlan_config->disconnect &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT)) ||
(rdev->wiphy.wowlan_config->magic_pkt &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT)) ||
(rdev->wiphy.wowlan_config->gtk_rekey_failure &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE)) ||
(rdev->wiphy.wowlan_config->eap_identity_req &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST)) ||
(rdev->wiphy.wowlan_config->four_way_handshake &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE)) ||
(rdev->wiphy.wowlan_config->rfkill_release &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE)))
goto nla_put_failure;
if (nl80211_send_wowlan_patterns(msg, rdev))
goto nla_put_failure;
if (nl80211_send_wowlan_tcp(msg,
rdev->wiphy.wowlan_config->tcp))
goto nla_put_failure;
if (nl80211_send_wowlan_nd(
msg,
rdev->wiphy.wowlan_config->nd_config))
goto nla_put_failure;
nla_nest_end(msg, nl_wowlan);
}
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
nlmsg_free(msg);
return -ENOBUFS;
}
static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
struct nlattr *attr,
struct cfg80211_wowlan *trig)
{
struct nlattr *tb[NUM_NL80211_WOWLAN_TCP];
struct cfg80211_wowlan_tcp *cfg;
struct nl80211_wowlan_tcp_data_token *tok = NULL;
struct nl80211_wowlan_tcp_data_seq *seq = NULL;
u32 size;
u32 data_size, wake_size, tokens_size = 0, wake_mask_size;
int err, port;
if (!rdev->wiphy.wowlan->tcp)
return -EINVAL;
err = nla_parse_nested(tb, MAX_NL80211_WOWLAN_TCP, attr,
nl80211_wowlan_tcp_policy, NULL);
if (err)
return err;
if (!tb[NL80211_WOWLAN_TCP_SRC_IPV4] ||
!tb[NL80211_WOWLAN_TCP_DST_IPV4] ||
!tb[NL80211_WOWLAN_TCP_DST_MAC] ||
!tb[NL80211_WOWLAN_TCP_DST_PORT] ||
!tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD] ||
!tb[NL80211_WOWLAN_TCP_DATA_INTERVAL] ||
!tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD] ||
!tb[NL80211_WOWLAN_TCP_WAKE_MASK])
return -EINVAL;
data_size = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]);
if (data_size > rdev->wiphy.wowlan->tcp->data_payload_max)
return -EINVAL;
if (nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) >
rdev->wiphy.wowlan->tcp->data_interval_max ||
nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) == 0)
return -EINVAL;
wake_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]);
if (wake_size > rdev->wiphy.wowlan->tcp->wake_payload_max)
return -EINVAL;
wake_mask_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_MASK]);
if (wake_mask_size != DIV_ROUND_UP(wake_size, 8))
return -EINVAL;
if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]) {
u32 tokln = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]);
tok = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]);
tokens_size = tokln - sizeof(*tok);
if (!tok->len || tokens_size % tok->len)
return -EINVAL;
if (!rdev->wiphy.wowlan->tcp->tok)
return -EINVAL;
if (tok->len > rdev->wiphy.wowlan->tcp->tok->max_len)
return -EINVAL;
if (tok->len < rdev->wiphy.wowlan->tcp->tok->min_len)
return -EINVAL;
if (tokens_size > rdev->wiphy.wowlan->tcp->tok->bufsize)
return -EINVAL;
if (tok->offset + tok->len > data_size)
return -EINVAL;
}
if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]) {
seq = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]);
if (!rdev->wiphy.wowlan->tcp->seq)
return -EINVAL;
if (seq->len == 0 || seq->len > 4)
return -EINVAL;
if (seq->len + seq->offset > data_size)
return -EINVAL;
}
size = sizeof(*cfg);
size += data_size;
size += wake_size + wake_mask_size;
size += tokens_size;
cfg = kzalloc(size, GFP_KERNEL);
if (!cfg)
return -ENOMEM;
cfg->src = nla_get_in_addr(tb[NL80211_WOWLAN_TCP_SRC_IPV4]);
cfg->dst = nla_get_in_addr(tb[NL80211_WOWLAN_TCP_DST_IPV4]);
memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]),
ETH_ALEN);
if (tb[NL80211_WOWLAN_TCP_SRC_PORT])
port = nla_get_u16(tb[NL80211_WOWLAN_TCP_SRC_PORT]);
else
port = 0;
#ifdef CONFIG_INET
/* allocate a socket and port for it and use it */
err = __sock_create(wiphy_net(&rdev->wiphy), PF_INET, SOCK_STREAM,
IPPROTO_TCP, &cfg->sock, 1);
if (err) {
kfree(cfg);
return err;
}
if (inet_csk_get_port(cfg->sock->sk, port)) {
sock_release(cfg->sock);
kfree(cfg);
return -EADDRINUSE;
}
cfg->src_port = inet_sk(cfg->sock->sk)->inet_num;
#else
if (!port) {
kfree(cfg);
return -EINVAL;
}
cfg->src_port = port;
#endif
cfg->dst_port = nla_get_u16(tb[NL80211_WOWLAN_TCP_DST_PORT]);
cfg->payload_len = data_size;
cfg->payload = (u8 *)cfg + sizeof(*cfg) + tokens_size;
memcpy((void *)cfg->payload,
nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]),
data_size);
if (seq)
cfg->payload_seq = *seq;
cfg->data_interval = nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]);
cfg->wake_len = wake_size;
cfg->wake_data = (u8 *)cfg + sizeof(*cfg) + tokens_size + data_size;
memcpy((void *)cfg->wake_data,
nla_data(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]),
wake_size);
cfg->wake_mask = (u8 *)cfg + sizeof(*cfg) + tokens_size +
data_size + wake_size;
memcpy((void *)cfg->wake_mask,
nla_data(tb[NL80211_WOWLAN_TCP_WAKE_MASK]),
wake_mask_size);
if (tok) {
cfg->tokens_size = tokens_size;
memcpy(&cfg->payload_tok, tok, sizeof(*tok) + tokens_size);
}
trig->tcp = cfg;
return 0;
}
static int nl80211_parse_wowlan_nd(struct cfg80211_registered_device *rdev,
const struct wiphy_wowlan_support *wowlan,
struct nlattr *attr,
struct cfg80211_wowlan *trig)
{
struct nlattr **tb;
int err;
tb = kzalloc(NUM_NL80211_ATTR * sizeof(*tb), GFP_KERNEL);
if (!tb)
return -ENOMEM;
if (!(wowlan->flags & WIPHY_WOWLAN_NET_DETECT)) {
err = -EOPNOTSUPP;
goto out;
}
err = nla_parse_nested(tb, NL80211_ATTR_MAX, attr, nl80211_policy,
NULL);
if (err)
goto out;
trig->nd_config = nl80211_parse_sched_scan(&rdev->wiphy, NULL, tb,
wowlan->max_nd_match_sets);
err = PTR_ERR_OR_ZERO(trig->nd_config);
if (err)
trig->nd_config = NULL;
out:
kfree(tb);
return err;
}
static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct nlattr *tb[NUM_NL80211_WOWLAN_TRIG];
struct cfg80211_wowlan new_triggers = {};
struct cfg80211_wowlan *ntrig;
const struct wiphy_wowlan_support *wowlan = rdev->wiphy.wowlan;
int err, i;
bool prev_enabled = rdev->wiphy.wowlan_config;
bool regular = false;
if (!wowlan)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]) {
cfg80211_rdev_free_wowlan(rdev);
rdev->wiphy.wowlan_config = NULL;
goto set_wakeup;
}
err = nla_parse_nested(tb, MAX_NL80211_WOWLAN_TRIG,
info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_wowlan_policy, info->extack);
if (err)
return err;
if (tb[NL80211_WOWLAN_TRIG_ANY]) {
if (!(wowlan->flags & WIPHY_WOWLAN_ANY))
return -EINVAL;
new_triggers.any = true;
}
if (tb[NL80211_WOWLAN_TRIG_DISCONNECT]) {
if (!(wowlan->flags & WIPHY_WOWLAN_DISCONNECT))
return -EINVAL;
new_triggers.disconnect = true;
regular = true;
}
if (tb[NL80211_WOWLAN_TRIG_MAGIC_PKT]) {
if (!(wowlan->flags & WIPHY_WOWLAN_MAGIC_PKT))
return -EINVAL;
new_triggers.magic_pkt = true;
regular = true;
}
if (tb[NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED])
return -EINVAL;
if (tb[NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE]) {
if (!(wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE))
return -EINVAL;
new_triggers.gtk_rekey_failure = true;
regular = true;
}
if (tb[NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST]) {
if (!(wowlan->flags & WIPHY_WOWLAN_EAP_IDENTITY_REQ))
return -EINVAL;
new_triggers.eap_identity_req = true;
regular = true;
}
if (tb[NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE]) {
if (!(wowlan->flags & WIPHY_WOWLAN_4WAY_HANDSHAKE))
return -EINVAL;
new_triggers.four_way_handshake = true;
regular = true;
}
if (tb[NL80211_WOWLAN_TRIG_RFKILL_RELEASE]) {
if (!(wowlan->flags & WIPHY_WOWLAN_RFKILL_RELEASE))
return -EINVAL;
new_triggers.rfkill_release = true;
regular = true;
}
if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) {
struct nlattr *pat;
int n_patterns = 0;
int rem, pat_len, mask_len, pkt_offset;
struct nlattr *pat_tb[NUM_NL80211_PKTPAT];
regular = true;
nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
rem)
n_patterns++;
if (n_patterns > wowlan->n_patterns)
return -EINVAL;
new_triggers.patterns = kcalloc(n_patterns,
sizeof(new_triggers.patterns[0]),
GFP_KERNEL);
if (!new_triggers.patterns)
return -ENOMEM;
new_triggers.n_patterns = n_patterns;
i = 0;
nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
rem) {
u8 *mask_pat;
err = nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat,
nl80211_packet_pattern_policy,
info->extack);
if (err)
goto error;
err = -EINVAL;
if (!pat_tb[NL80211_PKTPAT_MASK] ||
!pat_tb[NL80211_PKTPAT_PATTERN])
goto error;
pat_len = nla_len(pat_tb[NL80211_PKTPAT_PATTERN]);
mask_len = DIV_ROUND_UP(pat_len, 8);
if (nla_len(pat_tb[NL80211_PKTPAT_MASK]) != mask_len)
goto error;
if (pat_len > wowlan->pattern_max_len ||
pat_len < wowlan->pattern_min_len)
goto error;
if (!pat_tb[NL80211_PKTPAT_OFFSET])
pkt_offset = 0;
else
pkt_offset = nla_get_u32(
pat_tb[NL80211_PKTPAT_OFFSET]);
if (pkt_offset > wowlan->max_pkt_offset)
goto error;
new_triggers.patterns[i].pkt_offset = pkt_offset;
mask_pat = kmalloc(mask_len + pat_len, GFP_KERNEL);
if (!mask_pat) {
err = -ENOMEM;
goto error;
}
new_triggers.patterns[i].mask = mask_pat;
memcpy(mask_pat, nla_data(pat_tb[NL80211_PKTPAT_MASK]),
mask_len);
mask_pat += mask_len;
new_triggers.patterns[i].pattern = mask_pat;
new_triggers.patterns[i].pattern_len = pat_len;
memcpy(mask_pat,
nla_data(pat_tb[NL80211_PKTPAT_PATTERN]),
pat_len);
i++;
}
}
if (tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION]) {
regular = true;
err = nl80211_parse_wowlan_tcp(
rdev, tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION],
&new_triggers);
if (err)
goto error;
}
if (tb[NL80211_WOWLAN_TRIG_NET_DETECT]) {
regular = true;
err = nl80211_parse_wowlan_nd(
rdev, wowlan, tb[NL80211_WOWLAN_TRIG_NET_DETECT],
&new_triggers);
if (err)
goto error;
}
/* The 'any' trigger means the device continues operating more or less
* as in its normal operation mode and wakes up the host on most of the
* normal interrupts (like packet RX, ...)
* It therefore makes little sense to combine with the more constrained
* wakeup trigger modes.
*/
if (new_triggers.any && regular) {
err = -EINVAL;
goto error;
}
ntrig = kmemdup(&new_triggers, sizeof(new_triggers), GFP_KERNEL);
if (!ntrig) {
err = -ENOMEM;
goto error;
}
cfg80211_rdev_free_wowlan(rdev);
rdev->wiphy.wowlan_config = ntrig;
set_wakeup:
if (rdev->ops->set_wakeup &&
prev_enabled != !!rdev->wiphy.wowlan_config)
rdev_set_wakeup(rdev, rdev->wiphy.wowlan_config);
return 0;
error:
for (i = 0; i < new_triggers.n_patterns; i++)
kfree(new_triggers.patterns[i].mask);
kfree(new_triggers.patterns);
if (new_triggers.tcp && new_triggers.tcp->sock)
sock_release(new_triggers.tcp->sock);
kfree(new_triggers.tcp);
kfree(new_triggers.nd_config);
return err;
}
#endif
static int nl80211_send_coalesce_rules(struct sk_buff *msg,
struct cfg80211_registered_device *rdev)
{
struct nlattr *nl_pats, *nl_pat, *nl_rule, *nl_rules;
int i, j, pat_len;
struct cfg80211_coalesce_rules *rule;
if (!rdev->coalesce->n_rules)
return 0;
nl_rules = nla_nest_start(msg, NL80211_ATTR_COALESCE_RULE);
if (!nl_rules)
return -ENOBUFS;
for (i = 0; i < rdev->coalesce->n_rules; i++) {
nl_rule = nla_nest_start(msg, i + 1);
if (!nl_rule)
return -ENOBUFS;
rule = &rdev->coalesce->rules[i];
if (nla_put_u32(msg, NL80211_ATTR_COALESCE_RULE_DELAY,
rule->delay))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_ATTR_COALESCE_RULE_CONDITION,
rule->condition))
return -ENOBUFS;
nl_pats = nla_nest_start(msg,
NL80211_ATTR_COALESCE_RULE_PKT_PATTERN);
if (!nl_pats)
return -ENOBUFS;
for (j = 0; j < rule->n_patterns; j++) {
nl_pat = nla_nest_start(msg, j + 1);
if (!nl_pat)
return -ENOBUFS;
pat_len = rule->patterns[j].pattern_len;
if (nla_put(msg, NL80211_PKTPAT_MASK,
DIV_ROUND_UP(pat_len, 8),
rule->patterns[j].mask) ||
nla_put(msg, NL80211_PKTPAT_PATTERN, pat_len,
rule->patterns[j].pattern) ||
nla_put_u32(msg, NL80211_PKTPAT_OFFSET,
rule->patterns[j].pkt_offset))
return -ENOBUFS;
nla_nest_end(msg, nl_pat);
}
nla_nest_end(msg, nl_pats);
nla_nest_end(msg, nl_rule);
}
nla_nest_end(msg, nl_rules);
return 0;
}
static int nl80211_get_coalesce(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct sk_buff *msg;
void *hdr;
if (!rdev->wiphy.coalesce)
return -EOPNOTSUPP;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_GET_COALESCE);
if (!hdr)
goto nla_put_failure;
if (rdev->coalesce && nl80211_send_coalesce_rules(msg, rdev))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
nlmsg_free(msg);
return -ENOBUFS;
}
void cfg80211_rdev_free_coalesce(struct cfg80211_registered_device *rdev)
{
struct cfg80211_coalesce *coalesce = rdev->coalesce;
int i, j;
struct cfg80211_coalesce_rules *rule;
if (!coalesce)
return;
for (i = 0; i < coalesce->n_rules; i++) {
rule = &coalesce->rules[i];
for (j = 0; j < rule->n_patterns; j++)
kfree(rule->patterns[j].mask);
kfree(rule->patterns);
}
kfree(coalesce->rules);
kfree(coalesce);
rdev->coalesce = NULL;
}
static int nl80211_parse_coalesce_rule(struct cfg80211_registered_device *rdev,
struct nlattr *rule,
struct cfg80211_coalesce_rules *new_rule)
{
int err, i;
const struct wiphy_coalesce_support *coalesce = rdev->wiphy.coalesce;
struct nlattr *tb[NUM_NL80211_ATTR_COALESCE_RULE], *pat;
int rem, pat_len, mask_len, pkt_offset, n_patterns = 0;
struct nlattr *pat_tb[NUM_NL80211_PKTPAT];
err = nla_parse_nested(tb, NL80211_ATTR_COALESCE_RULE_MAX, rule,
nl80211_coalesce_policy, NULL);
if (err)
return err;
if (tb[NL80211_ATTR_COALESCE_RULE_DELAY])
new_rule->delay =
nla_get_u32(tb[NL80211_ATTR_COALESCE_RULE_DELAY]);
if (new_rule->delay > coalesce->max_delay)
return -EINVAL;
if (tb[NL80211_ATTR_COALESCE_RULE_CONDITION])
new_rule->condition =
nla_get_u32(tb[NL80211_ATTR_COALESCE_RULE_CONDITION]);
if (new_rule->condition != NL80211_COALESCE_CONDITION_MATCH &&
new_rule->condition != NL80211_COALESCE_CONDITION_NO_MATCH)
return -EINVAL;
if (!tb[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN])
return -EINVAL;
nla_for_each_nested(pat, tb[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN],
rem)
n_patterns++;
if (n_patterns > coalesce->n_patterns)
return -EINVAL;
new_rule->patterns = kcalloc(n_patterns, sizeof(new_rule->patterns[0]),
GFP_KERNEL);
if (!new_rule->patterns)
return -ENOMEM;
new_rule->n_patterns = n_patterns;
i = 0;
nla_for_each_nested(pat, tb[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN],
rem) {
u8 *mask_pat;
err = nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat,
nl80211_packet_pattern_policy, NULL);
if (err)
return err;
if (!pat_tb[NL80211_PKTPAT_MASK] ||
!pat_tb[NL80211_PKTPAT_PATTERN])
return -EINVAL;
pat_len = nla_len(pat_tb[NL80211_PKTPAT_PATTERN]);
mask_len = DIV_ROUND_UP(pat_len, 8);
if (nla_len(pat_tb[NL80211_PKTPAT_MASK]) != mask_len)
return -EINVAL;
if (pat_len > coalesce->pattern_max_len ||
pat_len < coalesce->pattern_min_len)
return -EINVAL;
if (!pat_tb[NL80211_PKTPAT_OFFSET])
pkt_offset = 0;
else
pkt_offset = nla_get_u32(pat_tb[NL80211_PKTPAT_OFFSET]);
if (pkt_offset > coalesce->max_pkt_offset)
return -EINVAL;
new_rule->patterns[i].pkt_offset = pkt_offset;
mask_pat = kmalloc(mask_len + pat_len, GFP_KERNEL);
if (!mask_pat)
return -ENOMEM;
new_rule->patterns[i].mask = mask_pat;
memcpy(mask_pat, nla_data(pat_tb[NL80211_PKTPAT_MASK]),
mask_len);
mask_pat += mask_len;
new_rule->patterns[i].pattern = mask_pat;
new_rule->patterns[i].pattern_len = pat_len;
memcpy(mask_pat, nla_data(pat_tb[NL80211_PKTPAT_PATTERN]),
pat_len);
i++;
}
return 0;
}
static int nl80211_set_coalesce(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
const struct wiphy_coalesce_support *coalesce = rdev->wiphy.coalesce;
struct cfg80211_coalesce new_coalesce = {};
struct cfg80211_coalesce *n_coalesce;
int err, rem_rule, n_rules = 0, i, j;
struct nlattr *rule;
struct cfg80211_coalesce_rules *tmp_rule;
if (!rdev->wiphy.coalesce || !rdev->ops->set_coalesce)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_COALESCE_RULE]) {
cfg80211_rdev_free_coalesce(rdev);
rdev_set_coalesce(rdev, NULL);
return 0;
}
nla_for_each_nested(rule, info->attrs[NL80211_ATTR_COALESCE_RULE],
rem_rule)
n_rules++;
if (n_rules > coalesce->n_rules)
return -EINVAL;
new_coalesce.rules = kcalloc(n_rules, sizeof(new_coalesce.rules[0]),
GFP_KERNEL);
if (!new_coalesce.rules)
return -ENOMEM;
new_coalesce.n_rules = n_rules;
i = 0;
nla_for_each_nested(rule, info->attrs[NL80211_ATTR_COALESCE_RULE],
rem_rule) {
err = nl80211_parse_coalesce_rule(rdev, rule,
&new_coalesce.rules[i]);
if (err)
goto error;
i++;
}
err = rdev_set_coalesce(rdev, &new_coalesce);
if (err)
goto error;
n_coalesce = kmemdup(&new_coalesce, sizeof(new_coalesce), GFP_KERNEL);
if (!n_coalesce) {
err = -ENOMEM;
goto error;
}
cfg80211_rdev_free_coalesce(rdev);
rdev->coalesce = n_coalesce;
return 0;
error:
for (i = 0; i < new_coalesce.n_rules; i++) {
tmp_rule = &new_coalesce.rules[i];
for (j = 0; j < tmp_rule->n_patterns; j++)
kfree(tmp_rule->patterns[j].mask);
kfree(tmp_rule->patterns);
}
kfree(new_coalesce.rules);
return err;
}
static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct nlattr *tb[NUM_NL80211_REKEY_DATA];
struct cfg80211_gtk_rekey_data rekey_data;
int err;
if (!info->attrs[NL80211_ATTR_REKEY_DATA])
return -EINVAL;
err = nla_parse_nested(tb, MAX_NL80211_REKEY_DATA,
info->attrs[NL80211_ATTR_REKEY_DATA],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_rekey_policy, info->extack);
if (err)
return err;
if (!tb[NL80211_REKEY_DATA_REPLAY_CTR] || !tb[NL80211_REKEY_DATA_KEK] ||
!tb[NL80211_REKEY_DATA_KCK])
return -EINVAL;
if (nla_len(tb[NL80211_REKEY_DATA_REPLAY_CTR]) != NL80211_REPLAY_CTR_LEN)
return -ERANGE;
if (nla_len(tb[NL80211_REKEY_DATA_KEK]) != NL80211_KEK_LEN)
return -ERANGE;
if (nla_len(tb[NL80211_REKEY_DATA_KCK]) != NL80211_KCK_LEN)
return -ERANGE;
rekey_data.kek = nla_data(tb[NL80211_REKEY_DATA_KEK]);
rekey_data.kck = nla_data(tb[NL80211_REKEY_DATA_KCK]);
rekey_data.replay_ctr = nla_data(tb[NL80211_REKEY_DATA_REPLAY_CTR]);
wdev_lock(wdev);
if (!wdev->current_bss) {
err = -ENOTCONN;
goto out;
}
if (!rdev->ops->set_rekey_data) {
err = -EOPNOTSUPP;
goto out;
}
err = rdev_set_rekey_data(rdev, dev, &rekey_data);
out:
wdev_unlock(wdev);
return err;
}
static int nl80211_register_unexpected_frame(struct sk_buff *skb,
struct genl_info *info)
{
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
if (wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
if (wdev->ap_unexpected_nlportid)
return -EBUSY;
wdev->ap_unexpected_nlportid = info->snd_portid;
return 0;
}
static int nl80211_probe_client(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct sk_buff *msg;
void *hdr;
const u8 *addr;
u64 cookie;
int err;
if (wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!rdev->ops->probe_client)
return -EOPNOTSUPP;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_PROBE_CLIENT);
if (!hdr) {
err = -ENOBUFS;
goto free_msg;
}
addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = rdev_probe_client(rdev, dev, addr, &cookie);
if (err)
goto free_msg;
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
err = -ENOBUFS;
free_msg:
nlmsg_free(msg);
return err;
}
static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct cfg80211_beacon_registration *reg, *nreg;
int rv;
if (!(rdev->wiphy.flags & WIPHY_FLAG_REPORTS_OBSS))
return -EOPNOTSUPP;
nreg = kzalloc(sizeof(*nreg), GFP_KERNEL);
if (!nreg)
return -ENOMEM;
/* First, check if already registered. */
spin_lock_bh(&rdev->beacon_registrations_lock);
list_for_each_entry(reg, &rdev->beacon_registrations, list) {
if (reg->nlportid == info->snd_portid) {
rv = -EALREADY;
goto out_err;
}
}
/* Add it to the list */
nreg->nlportid = info->snd_portid;
list_add(&nreg->list, &rdev->beacon_registrations);
spin_unlock_bh(&rdev->beacon_registrations_lock);
return 0;
out_err:
spin_unlock_bh(&rdev->beacon_registrations_lock);
kfree(nreg);
return rv;
}
static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
int err;
if (!rdev->ops->start_p2p_device)
return -EOPNOTSUPP;
if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
return -EOPNOTSUPP;
if (wdev_running(wdev))
return 0;
if (rfkill_blocked(rdev->rfkill))
return -ERFKILL;
err = rdev_start_p2p_device(rdev, wdev);
if (err)
return err;
wdev->is_running = true;
rdev->opencount++;
return 0;
}
static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
return -EOPNOTSUPP;
if (!rdev->ops->stop_p2p_device)
return -EOPNOTSUPP;
cfg80211_stop_p2p_device(rdev, wdev);
return 0;
}
static int nl80211_start_nan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_nan_conf conf = {};
int err;
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (wdev_running(wdev))
return -EEXIST;
if (rfkill_blocked(rdev->rfkill))
return -ERFKILL;
if (!info->attrs[NL80211_ATTR_NAN_MASTER_PREF])
return -EINVAL;
conf.master_pref =
nla_get_u8(info->attrs[NL80211_ATTR_NAN_MASTER_PREF]);
if (!conf.master_pref)
return -EINVAL;
if (info->attrs[NL80211_ATTR_BANDS]) {
u32 bands = nla_get_u32(info->attrs[NL80211_ATTR_BANDS]);
if (bands & ~(u32)wdev->wiphy->nan_supported_bands)
return -EOPNOTSUPP;
if (bands && !(bands & BIT(NL80211_BAND_2GHZ)))
return -EINVAL;
conf.bands = bands;
}
err = rdev_start_nan(rdev, wdev, &conf);
if (err)
return err;
wdev->is_running = true;
rdev->opencount++;
return 0;
}
static int nl80211_stop_nan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
cfg80211_stop_nan(rdev, wdev);
return 0;
}
static int validate_nan_filter(struct nlattr *filter_attr)
{
struct nlattr *attr;
int len = 0, n_entries = 0, rem;
nla_for_each_nested(attr, filter_attr, rem) {
len += nla_len(attr);
n_entries++;
}
if (len >= U8_MAX)
return -EINVAL;
return n_entries;
}
static int handle_nan_filter(struct nlattr *attr_filter,
struct cfg80211_nan_func *func,
bool tx)
{
struct nlattr *attr;
int n_entries, rem, i;
struct cfg80211_nan_func_filter *filter;
n_entries = validate_nan_filter(attr_filter);
if (n_entries < 0)
return n_entries;
BUILD_BUG_ON(sizeof(*func->rx_filters) != sizeof(*func->tx_filters));
filter = kcalloc(n_entries, sizeof(*func->rx_filters), GFP_KERNEL);
if (!filter)
return -ENOMEM;
i = 0;
nla_for_each_nested(attr, attr_filter, rem) {
filter[i].filter = nla_memdup(attr, GFP_KERNEL);
filter[i].len = nla_len(attr);
i++;
}
if (tx) {
func->num_tx_filters = n_entries;
func->tx_filters = filter;
} else {
func->num_rx_filters = n_entries;
func->rx_filters = filter;
}
return 0;
}
static int nl80211_nan_add_func(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct nlattr *tb[NUM_NL80211_NAN_FUNC_ATTR], *func_attr;
struct cfg80211_nan_func *func;
struct sk_buff *msg = NULL;
void *hdr = NULL;
int err = 0;
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!wdev_running(wdev))
return -ENOTCONN;
if (!info->attrs[NL80211_ATTR_NAN_FUNC])
return -EINVAL;
err = nla_parse_nested(tb, NL80211_NAN_FUNC_ATTR_MAX,
info->attrs[NL80211_ATTR_NAN_FUNC],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_nan_func_policy, info->extack);
if (err)
return err;
func = kzalloc(sizeof(*func), GFP_KERNEL);
if (!func)
return -ENOMEM;
func->cookie = wdev->wiphy->cookie_counter++;
if (!tb[NL80211_NAN_FUNC_TYPE] ||
nla_get_u8(tb[NL80211_NAN_FUNC_TYPE]) > NL80211_NAN_FUNC_MAX_TYPE) {
err = -EINVAL;
goto out;
}
func->type = nla_get_u8(tb[NL80211_NAN_FUNC_TYPE]);
if (!tb[NL80211_NAN_FUNC_SERVICE_ID]) {
err = -EINVAL;
goto out;
}
memcpy(func->service_id, nla_data(tb[NL80211_NAN_FUNC_SERVICE_ID]),
sizeof(func->service_id));
func->close_range =
nla_get_flag(tb[NL80211_NAN_FUNC_CLOSE_RANGE]);
if (tb[NL80211_NAN_FUNC_SERVICE_INFO]) {
func->serv_spec_info_len =
nla_len(tb[NL80211_NAN_FUNC_SERVICE_INFO]);
func->serv_spec_info =
kmemdup(nla_data(tb[NL80211_NAN_FUNC_SERVICE_INFO]),
func->serv_spec_info_len,
GFP_KERNEL);
if (!func->serv_spec_info) {
err = -ENOMEM;
goto out;
}
}
if (tb[NL80211_NAN_FUNC_TTL])
func->ttl = nla_get_u32(tb[NL80211_NAN_FUNC_TTL]);
switch (func->type) {
case NL80211_NAN_FUNC_PUBLISH:
if (!tb[NL80211_NAN_FUNC_PUBLISH_TYPE]) {
err = -EINVAL;
goto out;
}
func->publish_type =
nla_get_u8(tb[NL80211_NAN_FUNC_PUBLISH_TYPE]);
func->publish_bcast =
nla_get_flag(tb[NL80211_NAN_FUNC_PUBLISH_BCAST]);
if ((!(func->publish_type & NL80211_NAN_SOLICITED_PUBLISH)) &&
func->publish_bcast) {
err = -EINVAL;
goto out;
}
break;
case NL80211_NAN_FUNC_SUBSCRIBE:
func->subscribe_active =
nla_get_flag(tb[NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE]);
break;
case NL80211_NAN_FUNC_FOLLOW_UP:
if (!tb[NL80211_NAN_FUNC_FOLLOW_UP_ID] ||
!tb[NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID] ||
!tb[NL80211_NAN_FUNC_FOLLOW_UP_DEST]) {
err = -EINVAL;
goto out;
}
func->followup_id =
nla_get_u8(tb[NL80211_NAN_FUNC_FOLLOW_UP_ID]);
func->followup_reqid =
nla_get_u8(tb[NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID]);
memcpy(func->followup_dest.addr,
nla_data(tb[NL80211_NAN_FUNC_FOLLOW_UP_DEST]),
sizeof(func->followup_dest.addr));
if (func->ttl) {
err = -EINVAL;
goto out;
}
break;
default:
err = -EINVAL;
goto out;
}
if (tb[NL80211_NAN_FUNC_SRF]) {
struct nlattr *srf_tb[NUM_NL80211_NAN_SRF_ATTR];
err = nla_parse_nested(srf_tb, NL80211_NAN_SRF_ATTR_MAX,
tb[NL80211_NAN_FUNC_SRF],
netlink: pass extended ACK struct where available This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 06:34:08 -06:00
nl80211_nan_srf_policy, info->extack);
if (err)
goto out;
func->srf_include =
nla_get_flag(srf_tb[NL80211_NAN_SRF_INCLUDE]);
if (srf_tb[NL80211_NAN_SRF_BF]) {
if (srf_tb[NL80211_NAN_SRF_MAC_ADDRS] ||
!srf_tb[NL80211_NAN_SRF_BF_IDX]) {
err = -EINVAL;
goto out;
}
func->srf_bf_len =
nla_len(srf_tb[NL80211_NAN_SRF_BF]);
func->srf_bf =
kmemdup(nla_data(srf_tb[NL80211_NAN_SRF_BF]),
func->srf_bf_len, GFP_KERNEL);
if (!func->srf_bf) {
err = -ENOMEM;
goto out;
}
func->srf_bf_idx =
nla_get_u8(srf_tb[NL80211_NAN_SRF_BF_IDX]);
} else {
struct nlattr *attr, *mac_attr =
srf_tb[NL80211_NAN_SRF_MAC_ADDRS];
int n_entries, rem, i = 0;
if (!mac_attr) {
err = -EINVAL;
goto out;
}
n_entries = validate_acl_mac_addrs(mac_attr);
if (n_entries <= 0) {
err = -EINVAL;
goto out;
}
func->srf_num_macs = n_entries;
func->srf_macs =
kzalloc(sizeof(*func->srf_macs) * n_entries,
GFP_KERNEL);
if (!func->srf_macs) {
err = -ENOMEM;
goto out;
}
nla_for_each_nested(attr, mac_attr, rem)
memcpy(func->srf_macs[i++].addr, nla_data(attr),
sizeof(*func->srf_macs));
}
}
if (tb[NL80211_NAN_FUNC_TX_MATCH_FILTER]) {
err = handle_nan_filter(tb[NL80211_NAN_FUNC_TX_MATCH_FILTER],
func, true);
if (err)
goto out;
}
if (tb[NL80211_NAN_FUNC_RX_MATCH_FILTER]) {
err = handle_nan_filter(tb[NL80211_NAN_FUNC_RX_MATCH_FILTER],
func, false);
if (err)
goto out;
}
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg) {
err = -ENOMEM;
goto out;
}
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_ADD_NAN_FUNCTION);
/* This can't really happen - we just allocated 4KB */
if (WARN_ON(!hdr)) {
err = -ENOMEM;
goto out;
}
err = rdev_add_nan_func(rdev, wdev, func);
out:
if (err < 0) {
cfg80211_free_nan_func(func);
nlmsg_free(msg);
return err;
}
/* propagate the instance id and cookie to userspace */
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, func->cookie,
NL80211_ATTR_PAD))
goto nla_put_failure;
func_attr = nla_nest_start(msg, NL80211_ATTR_NAN_FUNC);
if (!func_attr)
goto nla_put_failure;
if (nla_put_u8(msg, NL80211_NAN_FUNC_INSTANCE_ID,
func->instance_id))
goto nla_put_failure;
nla_nest_end(msg, func_attr);
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
nlmsg_free(msg);
return -ENOBUFS;
}
static int nl80211_nan_del_func(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
u64 cookie;
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!wdev_running(wdev))
return -ENOTCONN;
if (!info->attrs[NL80211_ATTR_COOKIE])
return -EINVAL;
cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
rdev_del_nan_func(rdev, wdev, cookie);
return 0;
}
static int nl80211_nan_change_config(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_nan_conf conf = {};
u32 changed = 0;
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!wdev_running(wdev))
return -ENOTCONN;
if (info->attrs[NL80211_ATTR_NAN_MASTER_PREF]) {
conf.master_pref =
nla_get_u8(info->attrs[NL80211_ATTR_NAN_MASTER_PREF]);
if (conf.master_pref <= 1 || conf.master_pref == 255)
return -EINVAL;
changed |= CFG80211_NAN_CONF_CHANGED_PREF;
}
if (info->attrs[NL80211_ATTR_BANDS]) {
u32 bands = nla_get_u32(info->attrs[NL80211_ATTR_BANDS]);
if (bands & ~(u32)wdev->wiphy->nan_supported_bands)
return -EOPNOTSUPP;
if (bands && !(bands & BIT(NL80211_BAND_2GHZ)))
return -EINVAL;
conf.bands = bands;
changed |= CFG80211_NAN_CONF_CHANGED_BANDS;
}
if (!changed)
return -EINVAL;
return rdev_nan_change_conf(rdev, wdev, &conf, changed);
}
void cfg80211_nan_match(struct wireless_dev *wdev,
struct cfg80211_nan_match_params *match, gfp_t gfp)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct nlattr *match_attr, *local_func_attr, *peer_func_attr;
struct sk_buff *msg;
void *hdr;
if (WARN_ON(!match->inst_id || !match->peer_inst_id || !match->addr))
return;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NAN_MATCH);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
wdev->netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto nla_put_failure;
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, match->cookie,
NL80211_ATTR_PAD) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, match->addr))
goto nla_put_failure;
match_attr = nla_nest_start(msg, NL80211_ATTR_NAN_MATCH);
if (!match_attr)
goto nla_put_failure;
local_func_attr = nla_nest_start(msg, NL80211_NAN_MATCH_FUNC_LOCAL);
if (!local_func_attr)
goto nla_put_failure;
if (nla_put_u8(msg, NL80211_NAN_FUNC_INSTANCE_ID, match->inst_id))
goto nla_put_failure;
nla_nest_end(msg, local_func_attr);
peer_func_attr = nla_nest_start(msg, NL80211_NAN_MATCH_FUNC_PEER);
if (!peer_func_attr)
goto nla_put_failure;
if (nla_put_u8(msg, NL80211_NAN_FUNC_TYPE, match->type) ||
nla_put_u8(msg, NL80211_NAN_FUNC_INSTANCE_ID, match->peer_inst_id))
goto nla_put_failure;
if (match->info && match->info_len &&
nla_put(msg, NL80211_NAN_FUNC_SERVICE_INFO, match->info_len,
match->info))
goto nla_put_failure;
nla_nest_end(msg, peer_func_attr);
nla_nest_end(msg, match_attr);
genlmsg_end(msg, hdr);
if (!wdev->owner_nlportid)
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy),
msg, 0, NL80211_MCGRP_NAN, gfp);
else
genlmsg_unicast(wiphy_net(&rdev->wiphy), msg,
wdev->owner_nlportid);
return;
nla_put_failure:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_nan_match);
void cfg80211_nan_func_terminated(struct wireless_dev *wdev,
u8 inst_id,
enum nl80211_nan_func_term_reason reason,
u64 cookie, gfp_t gfp)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
struct nlattr *func_attr;
void *hdr;
if (WARN_ON(!inst_id))
return;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_DEL_NAN_FUNCTION);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
wdev->netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto nla_put_failure;
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD))
goto nla_put_failure;
func_attr = nla_nest_start(msg, NL80211_ATTR_NAN_FUNC);
if (!func_attr)
goto nla_put_failure;
if (nla_put_u8(msg, NL80211_NAN_FUNC_INSTANCE_ID, inst_id) ||
nla_put_u8(msg, NL80211_NAN_FUNC_TERM_REASON, reason))
goto nla_put_failure;
nla_nest_end(msg, func_attr);
genlmsg_end(msg, hdr);
if (!wdev->owner_nlportid)
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy),
msg, 0, NL80211_MCGRP_NAN, gfp);
else
genlmsg_unicast(wiphy_net(&rdev->wiphy), msg,
wdev->owner_nlportid);
return;
nla_put_failure:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_nan_func_terminated);
static int nl80211_get_protocol_features(struct sk_buff *skb,
struct genl_info *info)
{
void *hdr;
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_GET_PROTOCOL_FEATURES);
if (!hdr)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_PROTOCOL_FEATURES,
NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_reply(msg, info);
nla_put_failure:
kfree_skb(msg);
return -ENOBUFS;
}
static int nl80211_update_ft_ies(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct cfg80211_update_ft_ies_params ft_params;
struct net_device *dev = info->user_ptr[1];
if (!rdev->ops->update_ft_ies)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_MDID] ||
!info->attrs[NL80211_ATTR_IE] ||
!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
memset(&ft_params, 0, sizeof(ft_params));
ft_params.md = nla_get_u16(info->attrs[NL80211_ATTR_MDID]);
ft_params.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ft_params.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
return rdev_update_ft_ies(rdev, dev, &ft_params);
}
static int nl80211_crit_protocol_start(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
enum nl80211_crit_proto_id proto = NL80211_CRIT_PROTO_UNSPEC;
u16 duration;
int ret;
if (!rdev->ops->crit_proto_start)
return -EOPNOTSUPP;
if (WARN_ON(!rdev->ops->crit_proto_stop))
return -EINVAL;
if (rdev->crit_proto_nlportid)
return -EBUSY;
/* determine protocol if provided */
if (info->attrs[NL80211_ATTR_CRIT_PROT_ID])
proto = nla_get_u16(info->attrs[NL80211_ATTR_CRIT_PROT_ID]);
if (proto >= NUM_NL80211_CRIT_PROTO)
return -EINVAL;
/* timeout must be provided */
if (!info->attrs[NL80211_ATTR_MAX_CRIT_PROT_DURATION])
return -EINVAL;
duration =
nla_get_u16(info->attrs[NL80211_ATTR_MAX_CRIT_PROT_DURATION]);
if (duration > NL80211_CRIT_PROTO_MAX_DURATION)
return -ERANGE;
ret = rdev_crit_proto_start(rdev, wdev, proto, duration);
if (!ret)
rdev->crit_proto_nlportid = info->snd_portid;
return ret;
}
static int nl80211_crit_protocol_stop(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
if (!rdev->ops->crit_proto_stop)
return -EOPNOTSUPP;
if (rdev->crit_proto_nlportid) {
rdev->crit_proto_nlportid = 0;
rdev_crit_proto_stop(rdev, wdev);
}
return 0;
}
static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev =
__cfg80211_wdev_from_attrs(genl_info_net(info), info->attrs);
int i, err;
u32 vid, subcmd;
if (!rdev->wiphy.vendor_commands)
return -EOPNOTSUPP;
if (IS_ERR(wdev)) {
err = PTR_ERR(wdev);
if (err != -EINVAL)
return err;
wdev = NULL;
} else if (wdev->wiphy != &rdev->wiphy) {
return -EINVAL;
}
if (!info->attrs[NL80211_ATTR_VENDOR_ID] ||
!info->attrs[NL80211_ATTR_VENDOR_SUBCMD])
return -EINVAL;
vid = nla_get_u32(info->attrs[NL80211_ATTR_VENDOR_ID]);
subcmd = nla_get_u32(info->attrs[NL80211_ATTR_VENDOR_SUBCMD]);
for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
const struct wiphy_vendor_command *vcmd;
void *data = NULL;
int len = 0;
vcmd = &rdev->wiphy.vendor_commands[i];
if (vcmd->info.vendor_id != vid || vcmd->info.subcmd != subcmd)
continue;
if (vcmd->flags & (WIPHY_VENDOR_CMD_NEED_WDEV |
WIPHY_VENDOR_CMD_NEED_NETDEV)) {
if (!wdev)
return -EINVAL;
if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_NETDEV &&
!wdev->netdev)
return -EINVAL;
if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_RUNNING) {
if (!wdev_running(wdev))
return -ENETDOWN;
}
if (!vcmd->doit)
return -EOPNOTSUPP;
} else {
wdev = NULL;
}
if (info->attrs[NL80211_ATTR_VENDOR_DATA]) {
data = nla_data(info->attrs[NL80211_ATTR_VENDOR_DATA]);
len = nla_len(info->attrs[NL80211_ATTR_VENDOR_DATA]);
}
rdev->cur_cmd_info = info;
err = rdev->wiphy.vendor_commands[i].doit(&rdev->wiphy, wdev,
data, len);
rdev->cur_cmd_info = NULL;
return err;
}
return -EOPNOTSUPP;
}
static int nl80211_prepare_vendor_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct cfg80211_registered_device **rdev,
struct wireless_dev **wdev)
{
struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
u32 vid, subcmd;
unsigned int i;
int vcmd_idx = -1;
int err;
void *data = NULL;
unsigned int data_len = 0;
if (cb->args[0]) {
/* subtract the 1 again here */
struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0] - 1);
struct wireless_dev *tmp;
if (!wiphy)
return -ENODEV;
*rdev = wiphy_to_rdev(wiphy);
*wdev = NULL;
if (cb->args[1]) {
list_for_each_entry(tmp, &wiphy->wdev_list, list) {
if (tmp->identifier == cb->args[1] - 1) {
*wdev = tmp;
break;
}
}
}
/* keep rtnl locked in successful case */
return 0;
}
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, attrbuf,
nl80211_fam.maxattr, nl80211_policy, NULL);
if (err)
return err;
if (!attrbuf[NL80211_ATTR_VENDOR_ID] ||
!attrbuf[NL80211_ATTR_VENDOR_SUBCMD])
return -EINVAL;
*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), attrbuf);
if (IS_ERR(*wdev))
*wdev = NULL;
*rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
if (IS_ERR(*rdev))
return PTR_ERR(*rdev);
vid = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_ID]);
subcmd = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
for (i = 0; i < (*rdev)->wiphy.n_vendor_commands; i++) {
const struct wiphy_vendor_command *vcmd;
vcmd = &(*rdev)->wiphy.vendor_commands[i];
if (vcmd->info.vendor_id != vid || vcmd->info.subcmd != subcmd)
continue;
if (!vcmd->dumpit)
return -EOPNOTSUPP;
vcmd_idx = i;
break;
}
if (vcmd_idx < 0)
return -EOPNOTSUPP;
if (attrbuf[NL80211_ATTR_VENDOR_DATA]) {
data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]);
data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]);
}
/* 0 is the first index - add 1 to parse only once */
cb->args[0] = (*rdev)->wiphy_idx + 1;
/* add 1 to know if it was NULL */
cb->args[1] = *wdev ? (*wdev)->identifier + 1 : 0;
cb->args[2] = vcmd_idx;
cb->args[3] = (unsigned long)data;
cb->args[4] = data_len;
/* keep rtnl locked in successful case */
return 0;
}
static int nl80211_vendor_cmd_dump(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
unsigned int vcmd_idx;
const struct wiphy_vendor_command *vcmd;
void *data;
int data_len;
int err;
struct nlattr *vendor_data;
rtnl_lock();
err = nl80211_prepare_vendor_dump(skb, cb, &rdev, &wdev);
if (err)
goto out;
vcmd_idx = cb->args[2];
data = (void *)cb->args[3];
data_len = cb->args[4];
vcmd = &rdev->wiphy.vendor_commands[vcmd_idx];
if (vcmd->flags & (WIPHY_VENDOR_CMD_NEED_WDEV |
WIPHY_VENDOR_CMD_NEED_NETDEV)) {
if (!wdev) {
err = -EINVAL;
goto out;
}
if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_NETDEV &&
!wdev->netdev) {
err = -EINVAL;
goto out;
}
if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_RUNNING) {
if (!wdev_running(wdev)) {
err = -ENETDOWN;
goto out;
}
}
}
while (1) {
void *hdr = nl80211hdr_put(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
NL80211_CMD_VENDOR);
if (!hdr)
break;
if (nla_put_u32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(wdev && nla_put_u64_64bit(skb, NL80211_ATTR_WDEV,
wdev_id(wdev),
NL80211_ATTR_PAD))) {
genlmsg_cancel(skb, hdr);
break;
}
vendor_data = nla_nest_start(skb, NL80211_ATTR_VENDOR_DATA);
if (!vendor_data) {
genlmsg_cancel(skb, hdr);
break;
}
err = vcmd->dumpit(&rdev->wiphy, wdev, skb, data, data_len,
(unsigned long *)&cb->args[5]);
nla_nest_end(skb, vendor_data);
if (err == -ENOBUFS || err == -ENOENT) {
genlmsg_cancel(skb, hdr);
break;
} else if (err) {
genlmsg_cancel(skb, hdr);
goto out;
}
genlmsg_end(skb, hdr);
}
err = skb->len;
out:
rtnl_unlock();
return err;
}
struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy,
enum nl80211_commands cmd,
enum nl80211_attrs attr,
int approxlen)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
if (WARN_ON(!rdev->cur_cmd_info))
return NULL;
return __cfg80211_alloc_vendor_skb(rdev, NULL, approxlen,
rdev->cur_cmd_info->snd_portid,
rdev->cur_cmd_info->snd_seq,
cmd, attr, NULL, GFP_KERNEL);
}
EXPORT_SYMBOL(__cfg80211_alloc_reply_skb);
int cfg80211_vendor_cmd_reply(struct sk_buff *skb)
{
struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
/* clear CB data for netlink core to own from now on */
memset(skb->cb, 0, sizeof(skb->cb));
if (WARN_ON(!rdev->cur_cmd_info)) {
kfree_skb(skb);
return -EINVAL;
}
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
return genlmsg_reply(skb, rdev->cur_cmd_info);
}
EXPORT_SYMBOL_GPL(cfg80211_vendor_cmd_reply);
static int nl80211_set_qos_map(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct cfg80211_qos_map *qos_map = NULL;
struct net_device *dev = info->user_ptr[1];
u8 *pos, len, num_des, des_len, des;
int ret;
if (!rdev->ops->set_qos_map)
return -EOPNOTSUPP;
if (info->attrs[NL80211_ATTR_QOS_MAP]) {
pos = nla_data(info->attrs[NL80211_ATTR_QOS_MAP]);
len = nla_len(info->attrs[NL80211_ATTR_QOS_MAP]);
if (len % 2 || len < IEEE80211_QOS_MAP_LEN_MIN ||
len > IEEE80211_QOS_MAP_LEN_MAX)
return -EINVAL;
qos_map = kzalloc(sizeof(struct cfg80211_qos_map), GFP_KERNEL);
if (!qos_map)
return -ENOMEM;
num_des = (len - IEEE80211_QOS_MAP_LEN_MIN) >> 1;
if (num_des) {
des_len = num_des *
sizeof(struct cfg80211_dscp_exception);
memcpy(qos_map->dscp_exception, pos, des_len);
qos_map->num_des = num_des;
for (des = 0; des < num_des; des++) {
if (qos_map->dscp_exception[des].up > 7) {
kfree(qos_map);
return -EINVAL;
}
}
pos += des_len;
}
memcpy(qos_map->up, pos, IEEE80211_QOS_MAP_LEN_MIN);
}
wdev_lock(dev->ieee80211_ptr);
ret = nl80211_key_allowed(dev->ieee80211_ptr);
if (!ret)
ret = rdev_set_qos_map(rdev, dev, qos_map);
wdev_unlock(dev->ieee80211_ptr);
kfree(qos_map);
return ret;
}
static int nl80211_add_tx_ts(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *peer;
u8 tsid, up;
u16 admitted_time = 0;
int err;
if (!(rdev->wiphy.features & NL80211_FEATURE_SUPPORTS_WMM_ADMISSION))
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_TSID] || !info->attrs[NL80211_ATTR_MAC] ||
!info->attrs[NL80211_ATTR_USER_PRIO])
return -EINVAL;
tsid = nla_get_u8(info->attrs[NL80211_ATTR_TSID]);
if (tsid >= IEEE80211_NUM_TIDS)
return -EINVAL;
up = nla_get_u8(info->attrs[NL80211_ATTR_USER_PRIO]);
if (up >= IEEE80211_NUM_UPS)
return -EINVAL;
/* WMM uses TIDs 0-7 even for TSPEC */
if (tsid >= IEEE80211_FIRST_TSPEC_TSID) {
/* TODO: handle 802.11 TSPEC/admission control
* need more attributes for that (e.g. BA session requirement);
* change the WMM adminssion test above to allow both then
*/
return -EINVAL;
}
peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (info->attrs[NL80211_ATTR_ADMITTED_TIME]) {
admitted_time =
nla_get_u16(info->attrs[NL80211_ATTR_ADMITTED_TIME]);
if (!admitted_time)
return -EINVAL;
}
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
if (wdev->current_bss)
break;
err = -ENOTCONN;
goto out;
default:
err = -EOPNOTSUPP;
goto out;
}
err = rdev_add_tx_ts(rdev, dev, tsid, peer, up, admitted_time);
out:
wdev_unlock(wdev);
return err;
}
static int nl80211_del_tx_ts(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *peer;
u8 tsid;
int err;
if (!info->attrs[NL80211_ATTR_TSID] || !info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
tsid = nla_get_u8(info->attrs[NL80211_ATTR_TSID]);
peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
wdev_lock(wdev);
err = rdev_del_tx_ts(rdev, dev, tsid, peer);
wdev_unlock(wdev);
return err;
}
static int nl80211_tdls_channel_switch(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_chan_def chandef = {};
const u8 *addr;
u8 oper_class;
int err;
if (!rdev->ops->tdls_channel_switch ||
!(rdev->wiphy.features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH))
return -EOPNOTSUPP;
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
break;
default:
return -EOPNOTSUPP;
}
if (!info->attrs[NL80211_ATTR_MAC] ||
!info->attrs[NL80211_ATTR_OPER_CLASS])
return -EINVAL;
err = nl80211_parse_chandef(rdev, info, &chandef);
if (err)
return err;
/*
* Don't allow wide channels on the 2.4Ghz band, as per IEEE802.11-2012
* section 10.22.6.2.1. Disallow 5/10Mhz channels as well for now, the
* specification is not defined for them.
*/
if (chandef.chan->band == NL80211_BAND_2GHZ &&
chandef.width != NL80211_CHAN_WIDTH_20_NOHT &&
chandef.width != NL80211_CHAN_WIDTH_20)
return -EINVAL;
/* we will be active on the TDLS link */
if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &chandef,
wdev->iftype))
return -EINVAL;
/* don't allow switching to DFS channels */
if (cfg80211_chandef_dfs_required(wdev->wiphy, &chandef, wdev->iftype))
return -EINVAL;
addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
oper_class = nla_get_u8(info->attrs[NL80211_ATTR_OPER_CLASS]);
wdev_lock(wdev);
err = rdev_tdls_channel_switch(rdev, dev, addr, oper_class, &chandef);
wdev_unlock(wdev);
return err;
}
static int nl80211_tdls_cancel_channel_switch(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *addr;
if (!rdev->ops->tdls_channel_switch ||
!rdev->ops->tdls_cancel_channel_switch ||
!(rdev->wiphy.features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH))
return -EOPNOTSUPP;
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
break;
default:
return -EOPNOTSUPP;
}
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
wdev_lock(wdev);
rdev_tdls_cancel_channel_switch(rdev, dev, addr);
wdev_unlock(wdev);
return 0;
}
static int nl80211_set_multicast_to_unicast(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const struct nlattr *nla;
bool enabled;
if (!rdev->ops->set_multicast_to_unicast)
return -EOPNOTSUPP;
if (wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
nla = info->attrs[NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED];
enabled = nla_get_flag(nla);
return rdev_set_multicast_to_unicast(rdev, dev, enabled);
}
static int nl80211_set_pmk(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_pmk_conf pmk_conf = {};
int ret;
if (wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X))
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_MAC] || !info->attrs[NL80211_ATTR_PMK])
return -EINVAL;
wdev_lock(wdev);
if (!wdev->current_bss) {
ret = -ENOTCONN;
goto out;
}
pmk_conf.aa = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (memcmp(pmk_conf.aa, wdev->current_bss->pub.bssid, ETH_ALEN)) {
ret = -EINVAL;
goto out;
}
pmk_conf.pmk = nla_data(info->attrs[NL80211_ATTR_PMK]);
pmk_conf.pmk_len = nla_len(info->attrs[NL80211_ATTR_PMK]);
if (pmk_conf.pmk_len != WLAN_PMK_LEN &&
pmk_conf.pmk_len != WLAN_PMK_LEN_SUITE_B_192) {
ret = -EINVAL;
goto out;
}
if (info->attrs[NL80211_ATTR_PMKR0_NAME]) {
int r0_name_len = nla_len(info->attrs[NL80211_ATTR_PMKR0_NAME]);
if (r0_name_len != WLAN_PMK_NAME_LEN) {
ret = -EINVAL;
goto out;
}
pmk_conf.pmk_r0_name =
nla_data(info->attrs[NL80211_ATTR_PMKR0_NAME]);
}
ret = rdev_set_pmk(rdev, dev, &pmk_conf);
out:
wdev_unlock(wdev);
return ret;
}
static int nl80211_del_pmk(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *aa;
int ret;
if (wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)
return -EOPNOTSUPP;
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X))
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
wdev_lock(wdev);
aa = nla_data(info->attrs[NL80211_ATTR_MAC]);
ret = rdev_del_pmk(rdev, dev, aa);
wdev_unlock(wdev);
return ret;
}
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
#define NL80211_FLAG_CHECK_NETDEV_UP 0x08
#define NL80211_FLAG_NEED_NETDEV_UP (NL80211_FLAG_NEED_NETDEV |\
NL80211_FLAG_CHECK_NETDEV_UP)
#define NL80211_FLAG_NEED_WDEV 0x10
/* If a netdev is associated, it must be UP, P2P must be started */
#define NL80211_FLAG_NEED_WDEV_UP (NL80211_FLAG_NEED_WDEV |\
NL80211_FLAG_CHECK_NETDEV_UP)
#define NL80211_FLAG_CLEAR_SKB 0x20
static int nl80211_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
struct net_device *dev;
bool rtnl = ops->internal_flags & NL80211_FLAG_NEED_RTNL;
if (rtnl)
rtnl_lock();
if (ops->internal_flags & NL80211_FLAG_NEED_WIPHY) {
rdev = cfg80211_get_dev_from_info(genl_info_net(info), info);
if (IS_ERR(rdev)) {
if (rtnl)
rtnl_unlock();
return PTR_ERR(rdev);
}
info->user_ptr[0] = rdev;
} else if (ops->internal_flags & NL80211_FLAG_NEED_NETDEV ||
ops->internal_flags & NL80211_FLAG_NEED_WDEV) {
ASSERT_RTNL();
wdev = __cfg80211_wdev_from_attrs(genl_info_net(info),
info->attrs);
if (IS_ERR(wdev)) {
if (rtnl)
rtnl_unlock();
return PTR_ERR(wdev);
}
dev = wdev->netdev;
rdev = wiphy_to_rdev(wdev->wiphy);
if (ops->internal_flags & NL80211_FLAG_NEED_NETDEV) {
if (!dev) {
if (rtnl)
rtnl_unlock();
return -EINVAL;
}
info->user_ptr[1] = dev;
} else {
info->user_ptr[1] = wdev;
}
if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP &&
!wdev_running(wdev)) {
if (rtnl)
rtnl_unlock();
return -ENETDOWN;
}
if (dev)
dev_hold(dev);
info->user_ptr[0] = rdev;
}
return 0;
}
static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
if (info->user_ptr[1]) {
if (ops->internal_flags & NL80211_FLAG_NEED_WDEV) {
struct wireless_dev *wdev = info->user_ptr[1];
if (wdev->netdev)
dev_put(wdev->netdev);
} else {
dev_put(info->user_ptr[1]);
}
}
if (ops->internal_flags & NL80211_FLAG_NEED_RTNL)
rtnl_unlock();
/* If needed, clear the netlink message payload from the SKB
* as it might contain key data that shouldn't stick around on
* the heap after the SKB is freed. The netlink message header
* is still needed for further processing, so leave it intact.
*/
if (ops->internal_flags & NL80211_FLAG_CLEAR_SKB) {
struct nlmsghdr *nlh = nlmsg_hdr(skb);
memset(nlmsg_data(nlh), 0, nlmsg_len(nlh));
}
}
static const struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
.doit = nl80211_get_wiphy,
.dumpit = nl80211_dump_wiphy,
.done = nl80211_dump_wiphy_done,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_WIPHY,
.doit = nl80211_set_wiphy,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_INTERFACE,
.doit = nl80211_get_interface,
.dumpit = nl80211_dump_interface,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
.internal_flags = NL80211_FLAG_NEED_WDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_INTERFACE,
.doit = nl80211_set_interface,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_NEW_INTERFACE,
.doit = nl80211_new_interface,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_INTERFACE,
.doit = nl80211_del_interface,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_KEY,
.doit = nl80211_get_key,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_KEY,
.doit = nl80211_set_key,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL |
NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_NEW_KEY,
.doit = nl80211_new_key,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL |
NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_DEL_KEY,
.doit = nl80211_del_key,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_BEACON,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.doit = nl80211_set_beacon,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_START_AP,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.doit = nl80211_start_ap,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_STOP_AP,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.doit = nl80211_stop_ap,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_STATION,
.doit = nl80211_get_station,
.dumpit = nl80211_dump_station,
.policy = nl80211_policy,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_STATION,
.doit = nl80211_set_station,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_NEW_STATION,
.doit = nl80211_new_station,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_STATION,
.doit = nl80211_del_station,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_MPATH,
.doit = nl80211_get_mpath,
.dumpit = nl80211_dump_mpath,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_MPP,
.doit = nl80211_get_mpp,
.dumpit = nl80211_dump_mpp,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_MPATH,
.doit = nl80211_set_mpath,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_NEW_MPATH,
.doit = nl80211_new_mpath,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_MPATH,
.doit = nl80211_del_mpath,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_BSS,
.doit = nl80211_set_bss,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
},
{
.cmd = NL80211_CMD_GET_REG,
.doit = nl80211_get_reg_do,
.dumpit = nl80211_get_reg_dump,
.policy = nl80211_policy,
.internal_flags = NL80211_FLAG_NEED_RTNL,
/* can be retrieved by unprivileged users */
},
#ifdef CONFIG_CFG80211_CRDA_SUPPORT
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
{
.cmd = NL80211_CMD_SET_REG,
.doit = nl80211_set_reg,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_RTNL,
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
},
#endif
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
{
.cmd = NL80211_CMD_REQ_SET_REG,
.doit = nl80211_req_set_reg,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_MESH_CONFIG,
.doit = nl80211_get_mesh_config,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_MESH_CONFIG,
.doit = nl80211_update_mesh_config,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_TRIGGER_SCAN,
.doit = nl80211_trigger_scan,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_ABORT_SCAN,
.doit = nl80211_abort_scan,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_SCAN,
.policy = nl80211_policy,
.dumpit = nl80211_dump_scan,
},
{
.cmd = NL80211_CMD_START_SCHED_SCAN,
.doit = nl80211_start_sched_scan,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_STOP_SCHED_SCAN,
.doit = nl80211_stop_sched_scan,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
{
.cmd = NL80211_CMD_AUTHENTICATE,
.doit = nl80211_authenticate,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL |
NL80211_FLAG_CLEAR_SKB,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
},
{
.cmd = NL80211_CMD_ASSOCIATE,
.doit = nl80211_associate,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
},
{
.cmd = NL80211_CMD_DEAUTHENTICATE,
.doit = nl80211_deauthenticate,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
},
{
.cmd = NL80211_CMD_DISASSOCIATE,
.doit = nl80211_disassociate,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 05:39:22 -06:00
},
{
.cmd = NL80211_CMD_JOIN_IBSS,
.doit = nl80211_join_ibss,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_LEAVE_IBSS,
.doit = nl80211_leave_ibss,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
#ifdef CONFIG_NL80211_TESTMODE
{
.cmd = NL80211_CMD_TESTMODE,
.doit = nl80211_testmode_do,
.dumpit = nl80211_testmode_dump,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
#endif
{
.cmd = NL80211_CMD_CONNECT,
.doit = nl80211_connect,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_UPDATE_CONNECT_PARAMS,
.doit = nl80211_update_connect_params,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DISCONNECT,
.doit = nl80211_disconnect,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_WIPHY_NETNS,
.doit = nl80211_wiphy_netns,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_SURVEY,
.policy = nl80211_policy,
.dumpit = nl80211_dump_survey,
},
{
.cmd = NL80211_CMD_SET_PMKSA,
.doit = nl80211_setdel_pmksa,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_PMKSA,
.doit = nl80211_setdel_pmksa,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_FLUSH_PMKSA,
.doit = nl80211_flush_pmksa,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_REMAIN_ON_CHANNEL,
.doit = nl80211_remain_on_channel,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
.doit = nl80211_cancel_remain_on_channel,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_TX_BITRATE_MASK,
.doit = nl80211_set_tx_bitrate_mask,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_REGISTER_FRAME,
.doit = nl80211_register_mgmt,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_FRAME,
.doit = nl80211_tx_mgmt,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_FRAME_WAIT_CANCEL,
.doit = nl80211_tx_mgmt_cancel_wait,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
{
.cmd = NL80211_CMD_SET_POWER_SAVE,
.doit = nl80211_set_power_save,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
},
{
.cmd = NL80211_CMD_GET_POWER_SAVE,
.doit = nl80211_get_power_save,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 08:58:10 -07:00
},
{
.cmd = NL80211_CMD_SET_CQM,
.doit = nl80211_set_cqm,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
{
.cmd = NL80211_CMD_SET_CHANNEL,
.doit = nl80211_set_channel,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 07:25:02 -06:00
},
{
.cmd = NL80211_CMD_SET_WDS_PEER,
.doit = nl80211_set_wds_peer,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_JOIN_MESH,
.doit = nl80211_join_mesh,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_LEAVE_MESH,
.doit = nl80211_leave_mesh,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_JOIN_OCB,
.doit = nl80211_join_ocb,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_LEAVE_OCB,
.doit = nl80211_leave_ocb,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
#ifdef CONFIG_PM
{
.cmd = NL80211_CMD_GET_WOWLAN,
.doit = nl80211_get_wowlan,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_WOWLAN,
.doit = nl80211_set_wowlan,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
#endif
{
.cmd = NL80211_CMD_SET_REKEY_OFFLOAD,
.doit = nl80211_set_rekey_data,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL |
NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_TDLS_MGMT,
.doit = nl80211_tdls_mgmt,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_TDLS_OPER,
.doit = nl80211_tdls_oper,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_UNEXPECTED_FRAME,
.doit = nl80211_register_unexpected_frame,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_PROBE_CLIENT,
.doit = nl80211_probe_client,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_REGISTER_BEACONS,
.doit = nl80211_register_beacons,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_NOACK_MAP,
.doit = nl80211_set_noack_map,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_START_P2P_DEVICE,
.doit = nl80211_start_p2p_device,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_STOP_P2P_DEVICE,
.doit = nl80211_stop_p2p_device,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_START_NAN,
.doit = nl80211_start_nan,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_STOP_NAN,
.doit = nl80211_stop_nan,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_ADD_NAN_FUNCTION,
.doit = nl80211_nan_add_func,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_NAN_FUNCTION,
.doit = nl80211_nan_del_func,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_CHANGE_NAN_CONFIG,
.doit = nl80211_nan_change_config,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_MCAST_RATE,
.doit = nl80211_set_mcast_rate,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_MAC_ACL,
.doit = nl80211_set_mac_acl,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_RADAR_DETECT,
.doit = nl80211_start_radar_detection,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_PROTOCOL_FEATURES,
.doit = nl80211_get_protocol_features,
.policy = nl80211_policy,
},
{
.cmd = NL80211_CMD_UPDATE_FT_IES,
.doit = nl80211_update_ft_ies,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_CRIT_PROTOCOL_START,
.doit = nl80211_crit_protocol_start,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_CRIT_PROTOCOL_STOP,
.doit = nl80211_crit_protocol_stop,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_GET_COALESCE,
.doit = nl80211_get_coalesce,
.policy = nl80211_policy,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_COALESCE,
.doit = nl80211_set_coalesce,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_CHANNEL_SWITCH,
.doit = nl80211_channel_switch,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_VENDOR,
.doit = nl80211_vendor_cmd,
.dumpit = nl80211_vendor_cmd_dump,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_QOS_MAP,
.doit = nl80211_set_qos_map,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_ADD_TX_TS,
.doit = nl80211_add_tx_ts,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_TX_TS,
.doit = nl80211_del_tx_ts,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_TDLS_CHANNEL_SWITCH,
.doit = nl80211_tdls_channel_switch,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
.doit = nl80211_tdls_cancel_channel_switch,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_MULTICAST_TO_UNICAST,
.doit = nl80211_set_multicast_to_unicast,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_PMK,
.doit = nl80211_set_pmk,
.policy = nl80211_policy,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_DEL_PMK,
.doit = nl80211_del_pmk,
.policy = nl80211_policy,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
};
static struct genl_family nl80211_fam __ro_after_init = {
.name = NL80211_GENL_NAME, /* have users key off the name instead */
.hdrsize = 0, /* no private header */
.version = 1, /* no particular meaning now */
.maxattr = NL80211_ATTR_MAX,
.netnsok = true,
.pre_doit = nl80211_pre_doit,
.post_doit = nl80211_post_doit,
.module = THIS_MODULE,
.ops = nl80211_ops,
.n_ops = ARRAY_SIZE(nl80211_ops),
.mcgrps = nl80211_mcgrps,
.n_mcgrps = ARRAY_SIZE(nl80211_mcgrps),
};
/* notification functions */
void nl80211_notify_wiphy(struct cfg80211_registered_device *rdev,
enum nl80211_commands cmd)
{
struct sk_buff *msg;
struct nl80211_dump_wiphy_state state = {};
WARN_ON(cmd != NL80211_CMD_NEW_WIPHY &&
cmd != NL80211_CMD_DEL_WIPHY);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_send_wiphy(rdev, cmd, msg, 0, 0, 0, &state) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_CONFIG, GFP_KERNEL);
}
void nl80211_notify_iface(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
enum nl80211_commands cmd)
{
struct sk_buff *msg;
WARN_ON(cmd != NL80211_CMD_NEW_INTERFACE &&
cmd != NL80211_CMD_DEL_INTERFACE);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_send_iface(msg, 0, 0, 0, rdev, wdev,
cmd == NL80211_CMD_DEL_INTERFACE) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_CONFIG, GFP_KERNEL);
}
static int nl80211_add_scan_req(struct sk_buff *msg,
struct cfg80211_registered_device *rdev)
{
struct cfg80211_scan_request *req = rdev->scan_req;
struct nlattr *nest;
int i;
if (WARN_ON(!req))
return 0;
nest = nla_nest_start(msg, NL80211_ATTR_SCAN_SSIDS);
if (!nest)
goto nla_put_failure;
for (i = 0; i < req->n_ssids; i++) {
if (nla_put(msg, i, req->ssids[i].ssid_len, req->ssids[i].ssid))
goto nla_put_failure;
}
nla_nest_end(msg, nest);
nest = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES);
if (!nest)
goto nla_put_failure;
for (i = 0; i < req->n_channels; i++) {
if (nla_put_u32(msg, i, req->channels[i]->center_freq))
goto nla_put_failure;
}
nla_nest_end(msg, nest);
if (req->ie &&
nla_put(msg, NL80211_ATTR_IE, req->ie_len, req->ie))
goto nla_put_failure;
if (req->flags &&
nla_put_u32(msg, NL80211_ATTR_SCAN_FLAGS, req->flags))
goto nla_put_failure;
if (req->info.scan_start_tsf &&
(nla_put_u64_64bit(msg, NL80211_ATTR_SCAN_START_TIME_TSF,
req->info.scan_start_tsf, NL80211_BSS_PAD) ||
nla_put(msg, NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, ETH_ALEN,
req->info.tsf_bssid)))
goto nla_put_failure;
return 0;
nla_put_failure:
return -ENOBUFS;
}
static int nl80211_prep_scan_msg(struct sk_buff *msg,
struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
u32 portid, u32 seq, int flags,
u32 cmd)
{
void *hdr;
hdr = nl80211hdr_put(msg, portid, seq, flags, cmd);
if (!hdr)
return -1;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
wdev->netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto nla_put_failure;
/* ignore errors and send incomplete event anyway */
nl80211_add_scan_req(msg, rdev);
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int
nl80211_prep_sched_scan_msg(struct sk_buff *msg,
struct cfg80211_sched_scan_request *req, u32 cmd)
{
void *hdr;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr)
return -1;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY,
wiphy_to_rdev(req->wiphy)->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, req->dev->ifindex) ||
nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, req->reqid,
NL80211_ATTR_PAD))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 14:09:00 -07:00
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_prep_scan_msg(msg, rdev, wdev, 0, 0, 0,
NL80211_CMD_TRIGGER_SCAN) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, bool aborted)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return NULL;
if (nl80211_prep_scan_msg(msg, rdev, wdev, 0, 0, 0,
aborted ? NL80211_CMD_SCAN_ABORTED :
NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
nlmsg_free(msg);
return NULL;
}
return msg;
}
/* send message created by nl80211_build_scan_msg() */
void nl80211_send_scan_msg(struct cfg80211_registered_device *rdev,
struct sk_buff *msg)
{
if (!msg)
return;
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
void nl80211_send_sched_scan(struct cfg80211_sched_scan_request *req, u32 cmd)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_prep_sched_scan_msg(msg, req, cmd) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(req->wiphy), msg, 0,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
static bool nl80211_reg_change_event_fill(struct sk_buff *msg,
struct regulatory_request *request)
{
/* Userspace can always count this one always being set */
if (nla_put_u8(msg, NL80211_ATTR_REG_INITIATOR, request->initiator))
goto nla_put_failure;
if (request->alpha2[0] == '0' && request->alpha2[1] == '0') {
if (nla_put_u8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_WORLD))
goto nla_put_failure;
} else if (request->alpha2[0] == '9' && request->alpha2[1] == '9') {
if (nla_put_u8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_CUSTOM_WORLD))
goto nla_put_failure;
} else if ((request->alpha2[0] == '9' && request->alpha2[1] == '8') ||
request->intersect) {
if (nla_put_u8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_INTERSECTION))
goto nla_put_failure;
} else {
if (nla_put_u8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_COUNTRY) ||
nla_put_string(msg, NL80211_ATTR_REG_ALPHA2,
request->alpha2))
goto nla_put_failure;
}
if (request->wiphy_idx != WIPHY_IDX_INVALID) {
struct wiphy *wiphy = wiphy_idx_to_wiphy(request->wiphy_idx);
if (wiphy &&
nla_put_u32(msg, NL80211_ATTR_WIPHY, request->wiphy_idx))
goto nla_put_failure;
if (wiphy &&
wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED &&
nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
goto nla_put_failure;
}
return true;
nla_put_failure:
return false;
}
/*
* This can happen on global regulatory changes or device specific settings
* based on custom regulatory domains.
*/
void nl80211_common_reg_change_event(enum nl80211_commands cmd_id,
struct regulatory_request *request)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd_id);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nl80211_reg_change_event_fill(msg, request) == false)
goto nla_put_failure;
genlmsg_end(msg, hdr);
cfg80211: fix circular lock dependency (1) Luis reported this lockdep complaint, that he had also reported earlier but when trying to analyse I had been locking at the wrong code, and never saw the problem: (slightly abridged) ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-rc4-wl #6 ------------------------------------------------------- wpa_supplicant/3799 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<ffffffffa009246a>] cfg80211_get_dev_from_ifindex+0x1a/0x90 [cfg80211] but task is already holding lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff81400ff2>] rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814ee7a4>] mutex_lock_nested+0x44/0x350 [<ffffffff81400ff2>] rtnl_lock+0x12/0x20 [<ffffffffa009f6a5>] nl80211_send_reg_change_event+0x1f5/0x2a0 [cfg80211] [<ffffffffa009529e>] set_regdom+0x28e/0x4c0 [cfg80211] -> #0 (cfg80211_mutex){+.+.+.}: [<ffffffff8108587b>] __lock_acquire+0xe3b/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814ee7a4>] mutex_lock_nested+0x44/0x350 [<ffffffffa009246a>] cfg80211_get_dev_from_ifindex+0x1a/0x90 [cfg80211] [<ffffffffa009813f>] get_rdev_dev_by_info_ifindex+0x6f/0xa0 [cfg80211] [<ffffffffa009b12b>] nl80211_set_interface+0x3b/0x260 [cfg80211] When looking at the correct code, the problem is quite obvious. I'm not entirely sure which code paths lead here, so until I can analyse it better let's just use RCU to avoid the problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-25 02:54:13 -06:00
rcu_read_lock();
genlmsg_multicast_allns(&nl80211_fam, msg, 0,
NL80211_MCGRP_REGULATORY, GFP_ATOMIC);
cfg80211: fix circular lock dependency (1) Luis reported this lockdep complaint, that he had also reported earlier but when trying to analyse I had been locking at the wrong code, and never saw the problem: (slightly abridged) ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-rc4-wl #6 ------------------------------------------------------- wpa_supplicant/3799 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<ffffffffa009246a>] cfg80211_get_dev_from_ifindex+0x1a/0x90 [cfg80211] but task is already holding lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff81400ff2>] rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814ee7a4>] mutex_lock_nested+0x44/0x350 [<ffffffff81400ff2>] rtnl_lock+0x12/0x20 [<ffffffffa009f6a5>] nl80211_send_reg_change_event+0x1f5/0x2a0 [cfg80211] [<ffffffffa009529e>] set_regdom+0x28e/0x4c0 [cfg80211] -> #0 (cfg80211_mutex){+.+.+.}: [<ffffffff8108587b>] __lock_acquire+0xe3b/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814ee7a4>] mutex_lock_nested+0x44/0x350 [<ffffffffa009246a>] cfg80211_get_dev_from_ifindex+0x1a/0x90 [cfg80211] [<ffffffffa009813f>] get_rdev_dev_by_info_ifindex+0x6f/0xa0 [cfg80211] [<ffffffffa009b12b>] nl80211_set_interface+0x3b/0x260 [cfg80211] When looking at the correct code, the problem is quite obvious. I'm not entirely sure which code paths lead here, so until I can analyse it better let's just use RCU to avoid the problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-25 02:54:13 -06:00
rcu_read_unlock();
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
const u8 *buf, size_t len,
enum nl80211_commands cmd, gfp_t gfp,
int uapsd_queues)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(100 + len, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf))
goto nla_put_failure;
if (uapsd_queues >= 0) {
struct nlattr *nla_wmm =
nla_nest_start(msg, NL80211_ATTR_STA_WME);
if (!nla_wmm)
goto nla_put_failure;
if (nla_put_u8(msg, NL80211_STA_WME_UAPSD_QUEUES,
uapsd_queues))
goto nla_put_failure;
nla_nest_end(msg, nla_wmm);
}
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_AUTHENTICATE, gfp, -1);
}
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp, int uapsd_queues)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_ASSOCIATE, gfp, uapsd_queues);
}
void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_DEAUTHENTICATE, gfp, -1);
}
void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_DISASSOCIATE, gfp, -1);
}
void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, const u8 *buf,
size_t len)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
const struct ieee80211_mgmt *mgmt = (void *)buf;
u32 cmd;
if (WARN_ON(len < 2))
return;
if (ieee80211_is_deauth(mgmt->frame_control))
cmd = NL80211_CMD_UNPROT_DEAUTHENTICATE;
else
cmd = NL80211_CMD_UNPROT_DISASSOCIATE;
trace_cfg80211_rx_unprot_mlme_mgmt(dev, buf, len);
nl80211_send_mlme_event(rdev, dev, buf, len, cmd, GFP_ATOMIC, -1);
}
EXPORT_SYMBOL(cfg80211_rx_unprot_mlme_mgmt);
static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, int cmd,
const u8 *addr, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put_flag(msg, NL80211_ATTR_TIMED_OUT) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
gfp_t gfp)
{
nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_AUTHENTICATE,
addr, gfp);
}
void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
gfp_t gfp)
{
nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_ASSOCIATE,
addr, gfp);
}
void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
struct cfg80211_connect_resp_params *cr,
gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(100 + cr->req_ie_len + cr->resp_ie_len +
cr->fils_kek_len + cr->pmk_len +
(cr->pmkid ? WLAN_PMKID_LEN : 0), gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_CONNECT);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
(cr->bssid &&
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, cr->bssid)) ||
nla_put_u16(msg, NL80211_ATTR_STATUS_CODE,
cr->status < 0 ? WLAN_STATUS_UNSPECIFIED_FAILURE :
cr->status) ||
(cr->status < 0 &&
(nla_put_flag(msg, NL80211_ATTR_TIMED_OUT) ||
nla_put_u32(msg, NL80211_ATTR_TIMEOUT_REASON,
cr->timeout_reason))) ||
(cr->authorized &&
nla_put_flag(msg, NL80211_ATTR_PORT_AUTHORIZED)) ||
(cr->req_ie &&
nla_put(msg, NL80211_ATTR_REQ_IE, cr->req_ie_len, cr->req_ie)) ||
(cr->resp_ie &&
nla_put(msg, NL80211_ATTR_RESP_IE, cr->resp_ie_len,
cr->resp_ie)) ||
(cr->update_erp_next_seq_num &&
nla_put_u16(msg, NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
cr->fils_erp_next_seq_num)) ||
(cr->status == WLAN_STATUS_SUCCESS &&
((cr->fils_kek &&
nla_put(msg, NL80211_ATTR_FILS_KEK, cr->fils_kek_len,
cr->fils_kek)) ||
(cr->pmk &&
nla_put(msg, NL80211_ATTR_PMK, cr->pmk_len, cr->pmk)) ||
(cr->pmkid &&
nla_put(msg, NL80211_ATTR_PMKID, WLAN_PMKID_LEN, cr->pmkid)))))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
struct cfg80211_roam_info *info, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
const u8 *bssid = info->bss ? info->bss->bssid : info->bssid;
msg = nlmsg_new(100 + info->req_ie_len + info->resp_ie_len, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_ROAM);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid) ||
(info->req_ie &&
nla_put(msg, NL80211_ATTR_REQ_IE, info->req_ie_len,
info->req_ie)) ||
(info->resp_ie &&
nla_put(msg, NL80211_ATTR_RESP_IE, info->resp_ie_len,
info->resp_ie)) ||
(info->authorized &&
nla_put_flag(msg, NL80211_ATTR_PORT_AUTHORIZED)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_port_authorized(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_PORT_AUTHORIZED);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, GFP_KERNEL);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u16 reason,
const u8 *ie, size_t ie_len, bool from_ap)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(100 + ie_len, GFP_KERNEL);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_DISCONNECT);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
(from_ap && reason &&
nla_put_u16(msg, NL80211_ATTR_REASON_CODE, reason)) ||
(from_ap &&
nla_put_flag(msg, NL80211_ATTR_DISCONNECTED_BY_AP)) ||
(ie && nla_put(msg, NL80211_ATTR_IE, ie_len, ie)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, GFP_KERNEL);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_JOIN_IBSS);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *addr,
const u8* ie, u8 ie_len, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_MESH_POINT))
return;
trace_cfg80211_notify_new_peer_candidate(dev, addr);
msg = nlmsg_new(100 + ie_len, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NEW_PEER_CANDIDATE);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr) ||
(ie_len && ie &&
nla_put(msg, NL80211_ATTR_IE, ie_len , ie)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_notify_new_peer_candidate);
void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type, int key_id,
const u8 *tsc, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_MICHAEL_MIC_FAILURE);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
(addr && nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr)) ||
nla_put_u32(msg, NL80211_ATTR_KEY_TYPE, key_type) ||
(key_id != -1 &&
nla_put_u8(msg, NL80211_ATTR_KEY_IDX, key_id)) ||
(tsc && nla_put(msg, NL80211_ATTR_KEY_SEQ, 6, tsc)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_beacon_hint_event(struct wiphy *wiphy,
struct ieee80211_channel *channel_before,
struct ieee80211_channel *channel_after)
{
struct sk_buff *msg;
void *hdr;
struct nlattr *nl_freq;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_REG_BEACON_HINT);
if (!hdr) {
nlmsg_free(msg);
return;
}
/*
* Since we are applying the beacon hint to a wiphy we know its
* wiphy_idx is valid
*/
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy)))
goto nla_put_failure;
/* Before */
nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_BEFORE);
if (!nl_freq)
goto nla_put_failure;
if (nl80211_msg_put_channel(msg, channel_before, false))
goto nla_put_failure;
nla_nest_end(msg, nl_freq);
/* After */
nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_AFTER);
if (!nl_freq)
goto nla_put_failure;
if (nl80211_msg_put_channel(msg, channel_after, false))
goto nla_put_failure;
nla_nest_end(msg, nl_freq);
genlmsg_end(msg, hdr);
rcu_read_lock();
genlmsg_multicast_allns(&nl80211_fam, msg, 0,
NL80211_MCGRP_REGULATORY, GFP_ATOMIC);
rcu_read_unlock();
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
static void nl80211_send_remain_on_chan_event(
int cmd, struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, u64 cookie,
struct ieee80211_channel *chan,
unsigned int duration, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
wdev->netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, chan->center_freq) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
NL80211_CHAN_NO_HT) ||
nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD))
goto nla_put_failure;
if (cmd == NL80211_CMD_REMAIN_ON_CHANNEL &&
nla_put_u32(msg, NL80211_ATTR_DURATION, duration))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie,
struct ieee80211_channel *chan,
unsigned int duration, gfp_t gfp)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
trace_cfg80211_ready_on_channel(wdev, cookie, chan, duration);
nl80211_send_remain_on_chan_event(NL80211_CMD_REMAIN_ON_CHANNEL,
rdev, wdev, cookie, chan,
duration, gfp);
}
EXPORT_SYMBOL(cfg80211_ready_on_channel);
void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie,
struct ieee80211_channel *chan,
gfp_t gfp)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
trace_cfg80211_ready_on_channel_expired(wdev, cookie, chan);
nl80211_send_remain_on_chan_event(NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
rdev, wdev, cookie, chan, 0, gfp);
}
EXPORT_SYMBOL(cfg80211_remain_on_channel_expired);
void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp)
{
struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
trace_cfg80211_new_sta(dev, mac_addr, sinfo);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
if (nl80211_send_station(msg, NL80211_CMD_NEW_STATION, 0, 0, 0,
rdev, dev, mac_addr, sinfo) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
}
EXPORT_SYMBOL(cfg80211_new_sta);
void cfg80211_del_sta_sinfo(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp)
{
struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
struct station_info empty_sinfo = {};
if (!sinfo)
sinfo = &empty_sinfo;
trace_cfg80211_del_sta(dev, mac_addr);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
if (nl80211_send_station(msg, NL80211_CMD_DEL_STATION, 0, 0, 0,
rdev, dev, mac_addr, sinfo) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
}
EXPORT_SYMBOL(cfg80211_del_sta_sinfo);
void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
enum nl80211_connect_failed_reason reason,
gfp_t gfp)
{
struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_CONN_FAILED);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr) ||
nla_put_u32(msg, NL80211_ATTR_CONN_FAILED_REASON, reason))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_conn_failed);
static bool __nl80211_unexpected_frame(struct net_device *dev, u8 cmd,
const u8 *addr, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
u32 nlportid = ACCESS_ONCE(wdev->ap_unexpected_nlportid);
if (!nlportid)
return false;
msg = nlmsg_new(100, gfp);
if (!msg)
return true;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr) {
nlmsg_free(msg);
return true;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlportid);
return true;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
return true;
}
bool cfg80211_rx_spurious_frame(struct net_device *dev,
const u8 *addr, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
bool ret;
trace_cfg80211_rx_spurious_frame(dev, addr);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO)) {
trace_cfg80211_return_bool(false);
return false;
}
ret = __nl80211_unexpected_frame(dev, NL80211_CMD_UNEXPECTED_FRAME,
addr, gfp);
trace_cfg80211_return_bool(ret);
return ret;
}
EXPORT_SYMBOL(cfg80211_rx_spurious_frame);
bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
const u8 *addr, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
bool ret;
trace_cfg80211_rx_unexpected_4addr_frame(dev, addr);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO &&
wdev->iftype != NL80211_IFTYPE_AP_VLAN)) {
trace_cfg80211_return_bool(false);
return false;
}
ret = __nl80211_unexpected_frame(dev,
NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
addr, gfp);
trace_cfg80211_return_bool(ret);
return ret;
}
EXPORT_SYMBOL(cfg80211_rx_unexpected_4addr_frame);
int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, u32 nlportid,
int freq, int sig_dbm,
const u8 *buf, size_t len, u32 flags, gfp_t gfp)
{
struct net_device *netdev = wdev->netdev;
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(100 + len, gfp);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME);
if (!hdr) {
nlmsg_free(msg);
return -ENOMEM;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
(flags &&
nla_put_u32(msg, NL80211_ATTR_RXMGMT_FLAGS, flags)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlportid);
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
return -ENOBUFS;
}
void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie,
const u8 *buf, size_t len, bool ack, gfp_t gfp)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct net_device *netdev = wdev->netdev;
struct sk_buff *msg;
void *hdr;
trace_cfg80211_mgmt_tx_status(wdev, cookie, ack);
msg = nlmsg_new(100 + len, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME_TX_STATUS);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD) ||
(ack && nla_put_flag(msg, NL80211_ATTR_ACK)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_mgmt_tx_status);
static struct sk_buff *cfg80211_prepare_cqm(struct net_device *dev,
const char *mac, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
void **cb;
if (!msg)
return NULL;
cb = (void **)msg->cb;
cb[0] = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NOTIFY_CQM);
if (!cb[0]) {
nlmsg_free(msg);
return NULL;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex))
goto nla_put_failure;
if (mac && nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac))
goto nla_put_failure;
cb[1] = nla_nest_start(msg, NL80211_ATTR_CQM);
if (!cb[1])
goto nla_put_failure;
cb[2] = rdev;
return msg;
nla_put_failure:
nlmsg_free(msg);
return NULL;
}
static void cfg80211_send_cqm(struct sk_buff *msg, gfp_t gfp)
{
void **cb = (void **)msg->cb;
struct cfg80211_registered_device *rdev = cb[2];
nla_nest_end(msg, cb[1]);
genlmsg_end(msg, cb[0]);
memset(msg->cb, 0, sizeof(msg->cb));
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
}
void cfg80211_cqm_rssi_notify(struct net_device *dev,
enum nl80211_cqm_rssi_threshold_event rssi_event,
s32 rssi_level, gfp_t gfp)
{
struct sk_buff *msg;
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
trace_cfg80211_cqm_rssi_notify(dev, rssi_event, rssi_level);
if (WARN_ON(rssi_event != NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW &&
rssi_event != NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH))
return;
if (wdev->cqm_config) {
wdev->cqm_config->last_rssi_event_value = rssi_level;
cfg80211_cqm_rssi_update(rdev, dev);
if (rssi_level == 0)
rssi_level = wdev->cqm_config->last_rssi_event_value;
}
msg = cfg80211_prepare_cqm(dev, NULL, gfp);
if (!msg)
return;
if (nla_put_u32(msg, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
rssi_event))
goto nla_put_failure;
if (rssi_level && nla_put_s32(msg, NL80211_ATTR_CQM_RSSI_LEVEL,
rssi_level))
goto nla_put_failure;
cfg80211_send_cqm(msg, gfp);
return;
nla_put_failure:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_cqm_rssi_notify);
void cfg80211_cqm_txe_notify(struct net_device *dev,
const u8 *peer, u32 num_packets,
u32 rate, u32 intvl, gfp_t gfp)
{
struct sk_buff *msg;
msg = cfg80211_prepare_cqm(dev, peer, gfp);
if (!msg)
return;
if (nla_put_u32(msg, NL80211_ATTR_CQM_TXE_PKTS, num_packets))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_CQM_TXE_RATE, rate))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_CQM_TXE_INTVL, intvl))
goto nla_put_failure;
cfg80211_send_cqm(msg, gfp);
return;
nla_put_failure:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_cqm_txe_notify);
void cfg80211_cqm_pktloss_notify(struct net_device *dev,
const u8 *peer, u32 num_packets, gfp_t gfp)
{
struct sk_buff *msg;
trace_cfg80211_cqm_pktloss_notify(dev, peer, num_packets);
msg = cfg80211_prepare_cqm(dev, peer, gfp);
if (!msg)
return;
if (nla_put_u32(msg, NL80211_ATTR_CQM_PKT_LOSS_EVENT, num_packets))
goto nla_put_failure;
cfg80211_send_cqm(msg, gfp);
return;
nla_put_failure:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_cqm_pktloss_notify);
void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp)
{
struct sk_buff *msg;
msg = cfg80211_prepare_cqm(dev, NULL, gfp);
if (!msg)
return;
if (nla_put_flag(msg, NL80211_ATTR_CQM_BEACON_LOSS_EVENT))
goto nla_put_failure;
cfg80211_send_cqm(msg, gfp);
return;
nla_put_failure:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_cqm_beacon_loss_notify);
static void nl80211_gtk_rekey_notify(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *replay_ctr, gfp_t gfp)
{
struct sk_buff *msg;
struct nlattr *rekey_attr;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_SET_REKEY_OFFLOAD);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid))
goto nla_put_failure;
rekey_attr = nla_nest_start(msg, NL80211_ATTR_REKEY_DATA);
if (!rekey_attr)
goto nla_put_failure;
if (nla_put(msg, NL80211_REKEY_DATA_REPLAY_CTR,
NL80211_REPLAY_CTR_LEN, replay_ctr))
goto nla_put_failure;
nla_nest_end(msg, rekey_attr);
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
const u8 *replay_ctr, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
trace_cfg80211_gtk_rekey_notify(dev, bssid);
nl80211_gtk_rekey_notify(rdev, dev, bssid, replay_ctr, gfp);
}
EXPORT_SYMBOL(cfg80211_gtk_rekey_notify);
static void
nl80211_pmksa_candidate_notify(struct cfg80211_registered_device *rdev,
struct net_device *netdev, int index,
const u8 *bssid, bool preauth, gfp_t gfp)
{
struct sk_buff *msg;
struct nlattr *attr;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_PMKSA_CANDIDATE);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex))
goto nla_put_failure;
attr = nla_nest_start(msg, NL80211_ATTR_PMKSA_CANDIDATE);
if (!attr)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_PMKSA_CANDIDATE_INDEX, index) ||
nla_put(msg, NL80211_PMKSA_CANDIDATE_BSSID, ETH_ALEN, bssid) ||
(preauth &&
nla_put_flag(msg, NL80211_PMKSA_CANDIDATE_PREAUTH)))
goto nla_put_failure;
nla_nest_end(msg, attr);
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
const u8 *bssid, bool preauth, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
trace_cfg80211_pmksa_candidate_notify(dev, index, bssid, preauth);
nl80211_pmksa_candidate_notify(rdev, dev, index, bssid, preauth, gfp);
}
EXPORT_SYMBOL(cfg80211_pmksa_candidate_notify);
static void nl80211_ch_switch_notify(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
struct cfg80211_chan_def *chandef,
gfp_t gfp,
enum nl80211_commands notif,
u8 count)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, notif);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex))
goto nla_put_failure;
if (nl80211_send_chandef(msg, chandef))
goto nla_put_failure;
if ((notif == NL80211_CMD_CH_SWITCH_STARTED_NOTIFY) &&
(nla_put_u32(msg, NL80211_ATTR_CH_SWITCH_COUNT, count)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void cfg80211_ch_switch_notify(struct net_device *dev,
struct cfg80211_chan_def *chandef)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_WDEV_LOCK(wdev);
trace_cfg80211_ch_switch_notify(dev, chandef);
wdev->chandef = *chandef;
wdev->preset_chandef = *chandef;
nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL,
NL80211_CMD_CH_SWITCH_NOTIFY, 0);
}
EXPORT_SYMBOL(cfg80211_ch_switch_notify);
void cfg80211_ch_switch_started_notify(struct net_device *dev,
struct cfg80211_chan_def *chandef,
u8 count)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
trace_cfg80211_ch_switch_started_notify(dev, chandef);
nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL,
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, count);
}
EXPORT_SYMBOL(cfg80211_ch_switch_started_notify);
void
nl80211_radar_notify(struct cfg80211_registered_device *rdev,
const struct cfg80211_chan_def *chandef,
enum nl80211_radar_event event,
struct net_device *netdev, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_RADAR_DETECT);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx))
goto nla_put_failure;
/* NOP and radar events don't need a netdev parameter */
if (netdev) {
struct wireless_dev *wdev = netdev->ieee80211_ptr;
if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto nla_put_failure;
}
if (nla_put_u32(msg, NL80211_ATTR_RADAR_EVENT, event))
goto nla_put_failure;
if (nl80211_send_chandef(msg, chandef))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
u64 cookie, bool acked, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
trace_cfg80211_probe_status(dev, addr, cookie, acked);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_PROBE_CLIENT);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr) ||
nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, cookie,
NL80211_ATTR_PAD) ||
(acked && nla_put_flag(msg, NL80211_ATTR_ACK)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_probe_status);
void cfg80211_report_obss_beacon(struct wiphy *wiphy,
const u8 *frame, size_t len,
int freq, int sig_dbm)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
void *hdr;
struct cfg80211_beacon_registration *reg;
trace_cfg80211_report_obss_beacon(wiphy, frame, len, freq, sig_dbm);
spin_lock_bh(&rdev->beacon_registrations_lock);
list_for_each_entry(reg, &rdev->beacon_registrations, list) {
msg = nlmsg_new(len + 100, GFP_ATOMIC);
if (!msg) {
spin_unlock_bh(&rdev->beacon_registrations_lock);
return;
}
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME);
if (!hdr)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(freq &&
nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq)) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, frame))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, reg->nlportid);
}
spin_unlock_bh(&rdev->beacon_registrations_lock);
return;
nla_put_failure:
spin_unlock_bh(&rdev->beacon_registrations_lock);
if (hdr)
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_report_obss_beacon);
#ifdef CONFIG_PM
static int cfg80211_net_detect_results(struct sk_buff *msg,
struct cfg80211_wowlan_wakeup *wakeup)
{
struct cfg80211_wowlan_nd_info *nd = wakeup->net_detect;
struct nlattr *nl_results, *nl_match, *nl_freqs;
int i, j;
nl_results = nla_nest_start(
msg, NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS);
if (!nl_results)
return -EMSGSIZE;
for (i = 0; i < nd->n_matches; i++) {
struct cfg80211_wowlan_nd_match *match = nd->matches[i];
nl_match = nla_nest_start(msg, i);
if (!nl_match)
break;
/* The SSID attribute is optional in nl80211, but for
* simplicity reasons it's always present in the
* cfg80211 structure. If a driver can't pass the
* SSID, that needs to be changed. A zero length SSID
* is still a valid SSID (wildcard), so it cannot be
* used for this purpose.
*/
if (nla_put(msg, NL80211_ATTR_SSID, match->ssid.ssid_len,
match->ssid.ssid)) {
nla_nest_cancel(msg, nl_match);
goto out;
}
if (match->n_channels) {
nl_freqs = nla_nest_start(
msg, NL80211_ATTR_SCAN_FREQUENCIES);
if (!nl_freqs) {
nla_nest_cancel(msg, nl_match);
goto out;
}
for (j = 0; j < match->n_channels; j++) {
if (nla_put_u32(msg, j, match->channels[j])) {
nla_nest_cancel(msg, nl_freqs);
nla_nest_cancel(msg, nl_match);
goto out;
}
}
nla_nest_end(msg, nl_freqs);
}
nla_nest_end(msg, nl_match);
}
out:
nla_nest_end(msg, nl_results);
return 0;
}
void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,
struct cfg80211_wowlan_wakeup *wakeup,
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
int size = 200;
trace_cfg80211_report_wowlan_wakeup(wdev->wiphy, wdev, wakeup);
if (wakeup)
size += wakeup->packet_present_len;
msg = nlmsg_new(size, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_SET_WOWLAN);
if (!hdr)
goto free_msg;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto free_msg;
if (wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
wdev->netdev->ifindex))
goto free_msg;
if (wakeup) {
struct nlattr *reasons;
reasons = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS);
if (!reasons)
goto free_msg;
if (wakeup->disconnect &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT))
goto free_msg;
if (wakeup->magic_pkt &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT))
goto free_msg;
if (wakeup->gtk_rekey_failure &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE))
goto free_msg;
if (wakeup->eap_identity_req &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST))
goto free_msg;
if (wakeup->four_way_handshake &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE))
goto free_msg;
if (wakeup->rfkill_release &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))
goto free_msg;
if (wakeup->pattern_idx >= 0 &&
nla_put_u32(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN,
wakeup->pattern_idx))
goto free_msg;
if (wakeup->tcp_match &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH))
goto free_msg;
if (wakeup->tcp_connlost &&
nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST))
goto free_msg;
if (wakeup->tcp_nomoretokens &&
nla_put_flag(msg,
NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS))
goto free_msg;
if (wakeup->packet) {
u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211;
u32 len_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN;
if (!wakeup->packet_80211) {
pkt_attr =
NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023;
len_attr =
NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN;
}
if (wakeup->packet_len &&
nla_put_u32(msg, len_attr, wakeup->packet_len))
goto free_msg;
if (nla_put(msg, pkt_attr, wakeup->packet_present_len,
wakeup->packet))
goto free_msg;
}
if (wakeup->net_detect &&
cfg80211_net_detect_results(msg, wakeup))
goto free_msg;
nla_nest_end(msg, reasons);
}
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
free_msg:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_report_wowlan_wakeup);
#endif
void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer,
enum nl80211_tdls_operation oper,
u16 reason_code, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
trace_cfg80211_tdls_oper_request(wdev->wiphy, dev, peer, oper,
reason_code);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_TDLS_OPER);
if (!hdr) {
nlmsg_free(msg);
return;
}
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put_u8(msg, NL80211_ATTR_TDLS_OPERATION, oper) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, peer) ||
(reason_code > 0 &&
nla_put_u16(msg, NL80211_ATTR_REASON_CODE, reason_code)))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_tdls_oper_request);
static int nl80211_netlink_notify(struct notifier_block * nb,
unsigned long state,
void *_notify)
{
struct netlink_notify *notify = _notify;
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
struct cfg80211_beacon_registration *reg, *tmp;
if (state != NETLINK_URELEASE || notify->protocol != NETLINK_GENERIC)
return NOTIFY_DONE;
rcu_read_lock();
list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list) {
struct cfg80211_sched_scan_request *sched_scan_req;
list_for_each_entry_rcu(sched_scan_req,
&rdev->sched_scan_req_list,
list) {
if (sched_scan_req->owner_nlportid == notify->portid) {
sched_scan_req->nl_owner_dead = true;
schedule_work(&rdev->sched_scan_stop_wk);
}
}
list_for_each_entry_rcu(wdev, &rdev->wiphy.wdev_list, list) {
cfg80211_mlme_unregister_socket(wdev, notify->portid);
if (wdev->owner_nlportid == notify->portid) {
wdev->nl_owner_dead = true;
schedule_work(&rdev->destroy_work);
} else if (wdev->conn_owner_nlportid == notify->portid) {
schedule_work(&wdev->disconnect_wk);
}
}
spin_lock_bh(&rdev->beacon_registrations_lock);
list_for_each_entry_safe(reg, tmp, &rdev->beacon_registrations,
list) {
if (reg->nlportid == notify->portid) {
list_del(&reg->list);
kfree(reg);
break;
}
}
spin_unlock_bh(&rdev->beacon_registrations_lock);
}
rcu_read_unlock();
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 22:32:06 -07:00
/*
* It is possible that the user space process that is controlling the
* indoor setting disappeared, so notify the regulatory core.
*/
regulatory_netlink_notify(notify->portid);
return NOTIFY_OK;
}
static struct notifier_block nl80211_netlink_notifier = {
.notifier_call = nl80211_netlink_notify,
};
void cfg80211_ft_event(struct net_device *netdev,
struct cfg80211_ft_event_params *ft_event)
{
struct wiphy *wiphy = netdev->ieee80211_ptr->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
void *hdr;
trace_cfg80211_ft_event(wiphy, netdev, ft_event);
if (!ft_event->target_ap)
return;
msg = nlmsg_new(100 + ft_event->ric_ies_len, GFP_KERNEL);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FT_EVENT);
if (!hdr)
goto out;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, ft_event->target_ap))
goto out;
if (ft_event->ies &&
nla_put(msg, NL80211_ATTR_IE, ft_event->ies_len, ft_event->ies))
goto out;
if (ft_event->ric_ies &&
nla_put(msg, NL80211_ATTR_IE_RIC, ft_event->ric_ies_len,
ft_event->ric_ies))
goto out;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_MLME, GFP_KERNEL);
return;
out:
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_ft_event);
void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp)
{
struct cfg80211_registered_device *rdev;
struct sk_buff *msg;
void *hdr;
u32 nlportid;
rdev = wiphy_to_rdev(wdev->wiphy);
if (!rdev->crit_proto_nlportid)
return;
nlportid = rdev->crit_proto_nlportid;
rdev->crit_proto_nlportid = 0;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_CRIT_PROTOCOL_STOP);
if (!hdr)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlportid);
return;
nla_put_failure:
if (hdr)
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
EXPORT_SYMBOL(cfg80211_crit_proto_stopped);
void nl80211_send_ap_stopped(struct wireless_dev *wdev)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_STOP_AP);
if (!hdr)
goto out;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, wdev->netdev->ifindex) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto out;
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(wiphy), msg, 0,
NL80211_MCGRP_MLME, GFP_KERNEL);
return;
out:
nlmsg_free(msg);
}
/* initialisation/exit functions */
int __init nl80211_init(void)
{
int err;
err = genl_register_family(&nl80211_fam);
if (err)
return err;
err = netlink_register_notifier(&nl80211_netlink_notifier);
if (err)
goto err_out;
return 0;
err_out:
genl_unregister_family(&nl80211_fam);
return err;
}
void nl80211_exit(void)
{
netlink_unregister_notifier(&nl80211_netlink_notifier);
genl_unregister_family(&nl80211_fam);
}