2011-07-13 14:14:54 -06:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
|
2013-05-31 06:32:55 -06:00
|
|
|
#include "omap36xx.dtsi"
|
2011-07-13 14:14:54 -06:00
|
|
|
|
|
|
|
/ {
|
2012-09-10 11:20:44 -06:00
|
|
|
model = "TI OMAP3 BeagleBoard xM";
|
ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
SoC family definitions at the moment are reactive to board needs
as a result, beagle-xm would matchup with ti,omap3 which invokes
omap3430_init_early instead of omap3630_init_early. Obviously, this is
the wrong behavior.
With clock node dts conversion, we get the following warnings before
system hangs as a result and 3630 based platforms fails to boot
(uart4 clocks are only present in OMAP3630 and not present in
OMAP3430):
...
omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
omap_hwmod: uart4: cannot _init_clocks
WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434
_init+0x6c/0x80()
omap_hwmod: uart4: couldn't init clocks
...
WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
_enable+0x254/0x280()
omap_hwmod: timer12: enabled state can only be entered from
initialized, idle, or disabled state
...
WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224
_idle+0xd4/0xf8()
omap_hwmod: timer12: idle state can only be entered from enabled state
WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
_enable+0x254/0x280()
omap_hwmod: uart4: enabled state can only be entered from
initialized, idle, or disabled state
So, add specific compatiblity for 3630 to allow match for Beagle-XM
platform.
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: left out ti,omap343x, updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-07 14:43:49 -06:00
|
|
|
compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
|
2011-07-13 14:14:54 -06:00
|
|
|
|
2013-03-19 11:53:05 -06:00
|
|
|
cpus {
|
|
|
|
cpu@0 {
|
|
|
|
cpu0-supply = <&vcc>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-08-31 04:35:27 -06:00
|
|
|
memory@80000000 {
|
2011-07-13 14:14:54 -06:00
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x80000000 0x20000000>; /* 512 MB */
|
|
|
|
};
|
2012-09-05 01:46:26 -06:00
|
|
|
|
2013-09-20 01:43:51 -06:00
|
|
|
aliases {
|
|
|
|
display0 = &dvi0;
|
|
|
|
display1 = &tv0;
|
2016-12-02 14:11:37 -07:00
|
|
|
ethernet = ðernet;
|
2013-09-20 01:43:51 -06:00
|
|
|
};
|
|
|
|
|
2012-09-05 01:46:26 -06:00
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
2012-09-05 08:42:04 -06:00
|
|
|
|
|
|
|
heartbeat {
|
|
|
|
label = "beagleboard::usr0";
|
2013-05-31 06:32:56 -06:00
|
|
|
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
|
2012-09-05 08:42:04 -06:00
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
};
|
|
|
|
|
|
|
|
mmc {
|
|
|
|
label = "beagleboard::usr1";
|
2013-05-31 06:32:56 -06:00
|
|
|
gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
|
2012-09-05 08:42:04 -06:00
|
|
|
linux,default-trigger = "mmc0";
|
|
|
|
};
|
2012-09-05 01:46:26 -06:00
|
|
|
};
|
2012-08-29 07:31:05 -06:00
|
|
|
|
2013-01-18 07:16:18 -07:00
|
|
|
pwmleds {
|
|
|
|
compatible = "pwm-leds";
|
|
|
|
|
|
|
|
pmu_stat {
|
|
|
|
label = "beagleboard::pmu_stat";
|
|
|
|
pwms = <&twl_pwmled 1 7812500>;
|
|
|
|
max-brightness = <127>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2012-08-29 07:31:05 -06:00
|
|
|
sound {
|
|
|
|
compatible = "ti,omap-twl4030";
|
|
|
|
ti,model = "omap3beagle";
|
|
|
|
|
|
|
|
ti,mcbsp = <&mcbsp2>;
|
|
|
|
};
|
2013-05-31 10:27:05 -06:00
|
|
|
|
|
|
|
gpio_keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
user {
|
|
|
|
label = "user";
|
|
|
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
linux,code = <0x114>;
|
2015-10-21 04:10:12 -06:00
|
|
|
wakeup-source;
|
2013-05-31 10:27:05 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
};
|
2013-09-24 02:53:55 -06:00
|
|
|
|
|
|
|
/* HS USB Port 2 Power */
|
|
|
|
hsusb2_power: hsusb2_power_reg {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "hsusb2_vbus";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
2015-10-06 03:03:39 -06:00
|
|
|
gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
|
2013-09-24 02:53:55 -06:00
|
|
|
startup-delay-us = <70000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* HS USB Host PHY on PORT 2 */
|
|
|
|
hsusb2_phy: hsusb2_phy {
|
|
|
|
compatible = "usb-nop-xceiv";
|
|
|
|
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
|
|
|
|
vcc-supply = <&hsusb2_power>;
|
|
|
|
};
|
2013-09-20 01:43:51 -06:00
|
|
|
|
2016-06-27 13:20:47 -06:00
|
|
|
tfp410: encoder0 {
|
2013-09-20 01:43:51 -06:00
|
|
|
compatible = "ti,tfp410";
|
|
|
|
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
|
|
|
|
|
|
|
|
/* XXX pinctrl from twl */
|
|
|
|
|
|
|
|
ports {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
port@0 {
|
|
|
|
reg = <0>;
|
|
|
|
|
2016-06-27 13:20:47 -06:00
|
|
|
tfp410_in: endpoint {
|
2013-09-20 01:43:51 -06:00
|
|
|
remote-endpoint = <&dpi_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
port@1 {
|
|
|
|
reg = <1>;
|
|
|
|
|
2016-06-27 13:20:47 -06:00
|
|
|
tfp410_out: endpoint {
|
2013-09-20 01:43:51 -06:00
|
|
|
remote-endpoint = <&dvi_connector_in>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-06-27 13:20:47 -06:00
|
|
|
dvi0: connector0 {
|
2013-09-20 01:43:51 -06:00
|
|
|
compatible = "dvi-connector";
|
|
|
|
label = "dvi";
|
|
|
|
|
|
|
|
digital;
|
|
|
|
|
|
|
|
ddc-i2c-bus = <&i2c3>;
|
|
|
|
|
|
|
|
port {
|
|
|
|
dvi_connector_in: endpoint {
|
|
|
|
remote-endpoint = <&tfp410_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-06-27 13:20:47 -06:00
|
|
|
tv0: connector1 {
|
2013-09-20 01:43:51 -06:00
|
|
|
compatible = "svideo-connector";
|
|
|
|
label = "tv";
|
|
|
|
|
|
|
|
port {
|
|
|
|
tv_connector_in: endpoint {
|
|
|
|
remote-endpoint = <&venc_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2014-11-03 11:07:43 -07:00
|
|
|
|
|
|
|
etb@5401b000 {
|
|
|
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
|
|
|
reg = <0x5401b000 0x1000>;
|
|
|
|
|
|
|
|
clocks = <&emu_src_ck>;
|
|
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
|
|
etb_in: endpoint {
|
|
|
|
slave-mode;
|
|
|
|
remote-endpoint = <&etm_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
etm@54010000 {
|
|
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
|
|
reg = <0x54010000 0x1000>;
|
|
|
|
|
|
|
|
clocks = <&emu_src_ck>;
|
|
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
|
|
etm_out: endpoint {
|
|
|
|
remote-endpoint = <&etb_in>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2013-05-31 10:27:05 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&omap3_pmx_wkup {
|
|
|
|
gpio1_pins: pinmux_gpio1_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:02 -07:00
|
|
|
OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
|
2013-05-31 10:27:05 -06:00
|
|
|
>;
|
|
|
|
};
|
2013-09-20 01:43:51 -06:00
|
|
|
|
|
|
|
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:02 -07:00
|
|
|
OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
|
|
|
|
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
|
|
|
|
OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
|
|
|
|
OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
|
|
|
|
OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
|
|
|
|
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
|
2013-09-20 01:43:51 -06:00
|
|
|
>;
|
|
|
|
};
|
2011-07-13 14:14:54 -06:00
|
|
|
};
|
2011-07-13 14:14:54 -06:00
|
|
|
|
2013-09-24 02:53:55 -06:00
|
|
|
&omap3_pmx_core {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <
|
2014-01-07 15:01:39 -07:00
|
|
|
&hsusb2_pins
|
2013-09-24 02:53:55 -06:00
|
|
|
>;
|
|
|
|
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:02 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
|
2013-09-24 02:53:55 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-01-07 15:01:39 -07:00
|
|
|
hsusb2_pins: pinmux_hsusb2_pins {
|
2013-09-24 02:53:55 -06:00
|
|
|
pinctrl-single,pins = <
|
2014-01-07 15:01:39 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
|
|
|
|
>;
|
|
|
|
};
|
2013-09-20 01:43:51 -06:00
|
|
|
|
|
|
|
dss_dpi_pins1: pinmux_dss_dpi_pins2 {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
|
|
|
|
|
|
|
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
|
|
|
|
|
|
|
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
|
|
|
|
>;
|
|
|
|
};
|
2014-01-07 15:01:39 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
&omap3_pmx_core2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <
|
|
|
|
&hsusb2_2_pins
|
|
|
|
>;
|
|
|
|
|
|
|
|
hsusb2_2_pins: pinmux_hsusb2_2_pins {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
|
|
|
|
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
|
|
|
|
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
|
|
|
|
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
|
|
|
|
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
|
|
|
|
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
|
2013-09-24 02:53:55 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2011-07-13 14:14:54 -06:00
|
|
|
&i2c1 {
|
|
|
|
clock-frequency = <2600000>;
|
|
|
|
|
|
|
|
twl: twl@48 {
|
|
|
|
reg = <0x48>;
|
|
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
|
|
interrupt-parent = <&intc>;
|
2012-02-08 16:50:12 -07:00
|
|
|
|
2012-08-29 07:31:05 -06:00
|
|
|
twl_audio: audio {
|
|
|
|
compatible = "ti,twl4030-audio";
|
|
|
|
codec {
|
|
|
|
};
|
|
|
|
};
|
2014-06-16 02:10:22 -06:00
|
|
|
|
|
|
|
twl_power: power {
|
|
|
|
compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
|
|
|
|
ti,use_poweroff;
|
|
|
|
};
|
2011-07-13 14:14:54 -06:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-05-31 06:32:55 -06:00
|
|
|
#include "twl4030.dtsi"
|
2013-05-31 15:09:34 -06:00
|
|
|
#include "twl4030_omap3.dtsi"
|
2011-07-13 14:14:54 -06:00
|
|
|
|
|
|
|
&i2c2 {
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c3 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
};
|
2012-02-22 05:12:27 -07:00
|
|
|
|
|
|
|
&mmc1 {
|
|
|
|
vmmc-supply = <&vmmc1>;
|
|
|
|
vmmc_aux-supply = <&vsim>;
|
2012-05-12 22:14:24 -06:00
|
|
|
bus-width = <8>;
|
2012-02-22 05:12:27 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
&mmc2 {
|
2012-06-21 02:36:03 -06:00
|
|
|
status = "disabled";
|
2012-02-22 05:12:27 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
&mmc3 {
|
2012-06-21 02:36:03 -06:00
|
|
|
status = "disabled";
|
2012-02-22 05:12:27 -07:00
|
|
|
};
|
2012-09-05 01:46:26 -06:00
|
|
|
|
|
|
|
&twl_gpio {
|
|
|
|
ti,use-leds;
|
|
|
|
/* pullups: BIT(1) */
|
|
|
|
ti,pullups = <0x000002>;
|
|
|
|
/*
|
|
|
|
* pulldowns:
|
|
|
|
* BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
|
|
|
|
* BIT(15), BIT(16), BIT(17)
|
|
|
|
*/
|
|
|
|
ti,pulldowns = <0x03a1c4>;
|
|
|
|
};
|
2013-03-07 06:35:16 -07:00
|
|
|
|
|
|
|
&usb_otg_hs {
|
|
|
|
interface-type = <0>;
|
2013-05-09 10:06:57 -06:00
|
|
|
usb-phy = <&usb2_phy>;
|
2013-09-27 00:23:29 -06:00
|
|
|
phys = <&usb2_phy>;
|
|
|
|
phy-names = "usb2-phy";
|
2013-03-07 06:35:16 -07:00
|
|
|
mode = <3>;
|
|
|
|
power = <50>;
|
|
|
|
};
|
2013-05-30 18:38:00 -06:00
|
|
|
|
|
|
|
&uart3 {
|
2014-06-16 02:10:22 -06:00
|
|
|
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
2013-05-30 18:38:00 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart3_pins>;
|
|
|
|
};
|
2013-05-31 10:27:05 -06:00
|
|
|
|
|
|
|
&gpio1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&gpio1_pins>;
|
|
|
|
};
|
2013-09-24 02:53:55 -06:00
|
|
|
|
|
|
|
&usbhshost {
|
|
|
|
port2-mode = "ehci-phy";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbhsehci {
|
|
|
|
phys = <0 &hsusb2_phy>;
|
2016-12-02 14:11:37 -07:00
|
|
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
hub@2 {
|
|
|
|
compatible = "usb424,9514";
|
|
|
|
reg = <2>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
ethernet: usbether@1 {
|
|
|
|
compatible = "usb424,ec00";
|
|
|
|
reg = <1>;
|
|
|
|
};
|
|
|
|
};
|
2013-09-24 02:53:55 -06:00
|
|
|
};
|
2013-11-26 16:03:39 -07:00
|
|
|
|
|
|
|
&vaux2 {
|
|
|
|
regulator-name = "usb_1v8";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
2014-01-24 01:19:05 -07:00
|
|
|
|
|
|
|
&mcbsp2 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
2013-09-20 01:43:51 -06:00
|
|
|
|
|
|
|
&dss {
|
|
|
|
status = "ok";
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <
|
|
|
|
&dss_dpi_pins1
|
|
|
|
&dss_dpi_pins2
|
|
|
|
>;
|
|
|
|
|
|
|
|
port {
|
|
|
|
dpi_out: endpoint {
|
|
|
|
remote-endpoint = <&tfp410_in>;
|
|
|
|
data-lines = <24>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&venc {
|
|
|
|
status = "ok";
|
|
|
|
|
|
|
|
vdda-supply = <&vdac>;
|
|
|
|
|
|
|
|
port {
|
|
|
|
venc_out: endpoint {
|
|
|
|
remote-endpoint = <&tv_connector_in>;
|
|
|
|
ti,channels = <2>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|