Auto-update from upstream

arch/arm/kernel/module.c

@@ -101,6 +101,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			break;
 
 		case R_ARM_PC24:
+		case R_ARM_CALL:
+		case R_ARM_JUMP24:
 			offset = (*(u32 *)loc & 0x00ffffff) << 2;
 			if (offset & 0x02000000)
 				offset -= 0x04000000;

arch/arm/mach-pxa/pm.c

@@ -155,19 +155,20 @@ int pxa_pm_enter(suspend_state_t state)
 	PSPR = 0;
 
 	/* restore registers */
+	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
+	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
-	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
 	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
 #ifdef CONFIG_PXA27x
 	RESTORE(MDREFR);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3);
+	RESTORE_GPLEVEL(3); RESTORE(GPDR3);
-	RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
+	RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
 	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
 	RESTORE(PFER); RESTORE(PKWR);
 #endif

arch/ia64/kernel/process.c

@@ -721,11 +721,13 @@ flush_thread (void)
 	/* drop floating-point and debug-register state if it exists: */
 	current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
 	ia64_drop_fpu(current);
+#ifdef CONFIG_IA32_SUPPORT
 	if (IS_IA32_PROCESS(ia64_task_regs(current))) {
 		ia32_drop_partial_page_list(current);
 		current->thread.task_size = IA32_PAGE_OFFSET;
 		set_fs(USER_DS);
 	}
+#endif
 }
 
 /*

drivers/ide/Kconfig

@@ -807,14 +807,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
-        bool "Enable burstable Mode on DbDMA"
-        default false
-        depends BLK_DEV_IDE_AU1XXX
-        help
-          This option enable the burstable Flag on DbDMA controller
-          (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY").
-
 config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        int "Maximum transfer size (KB) per request (up to 128)"
        default "128"
@@ -940,7 +932,7 @@ config BLK_DEV_Q40IDE
 
 config BLK_DEV_MPC8xx_IDE
 	bool "MPC8xx IDE support"
-	depends on 8xx
+	depends on 8xx && IDE=y && BLK_DEV_IDE=y
 	help
 	  This option provides support for IDE on Motorola MPC8xx Systems.
 	  Please see 'Type of MPC8xx IDE interface' for details.

drivers/ide/ide-cd.c

@@ -1292,7 +1292,6 @@ static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block)
 	struct cdrom_info *info = drive->driver_data;
 
 	info->dma = 0;
-	info->cmd = 0;
 	info->start_seek = jiffies;
 	return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation);
 }
@@ -1344,8 +1343,6 @@ static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block)
 	    (rq->nr_sectors & (sectors_per_frame - 1)))
 		info->dma = 0;
 
-	info->cmd = READ;
-
 	/* Start sending the read request to the drive. */
 	return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation);
 }
@@ -1484,7 +1481,6 @@ static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive)
 	struct cdrom_info *info = drive->driver_data;
 
 	info->dma = 0;
-	info->cmd = 0;
 	rq->flags &= ~REQ_FAILED;
 	len = rq->data_len;
 
@@ -1891,7 +1887,6 @@ static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq)
 	/* use dma, if possible. we don't need to check more, since we
 	 * know that the transfer is always (at least!) frame aligned */
 	info->dma = drive->using_dma ? 1 : 0;
-	info->cmd = WRITE;
 
 	info->devinfo.media_written = 1;
 
@@ -1916,7 +1911,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 	rq->flags |= REQ_QUIET;
 
 	info->dma = 0;
-	info->cmd = 0;
 
 	/*
 	 * sg request
@@ -1925,7 +1919,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 		int mask = drive->queue->dma_alignment;
 		unsigned long addr = (unsigned long) page_address(bio_page(rq->bio));
 
-		info->cmd = rq_data_dir(rq);
 		info->dma = drive->using_dma;
 
 		/*

drivers/ide/ide-cd.h

@@ -480,7 +480,6 @@ struct cdrom_info {
 
 	struct request request_sense_request;
 	int dma;
-	int cmd;
 	unsigned long last_block;
 	unsigned long start_seek;
 	/* Buffer to hold mechanism status and changer slot table. */

drivers/ide/ide-disk.c

@@ -1034,12 +1034,12 @@ static int ide_disk_remove(struct device *dev)
 	struct ide_disk_obj *idkp = drive->driver_data;
 	struct gendisk *g = idkp->disk;
 
-	ide_cacheflush_p(drive);
-
 	ide_unregister_subdriver(drive, idkp->driver);
 
 	del_gendisk(g);
 
+	ide_cacheflush_p(drive);
+
 	ide_disk_put(idkp);
 
 	return 0;

drivers/ide/ide-dma.c

@@ -90,11 +90,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-struct drive_list_entry {
-	const char *id_model;
-	const char *id_firmware;
-};
-
 static const struct drive_list_entry drive_whitelist [] = {
 
 	{ "Micropolis 2112A"	,       "ALL"		},
@@ -139,7 +134,7 @@ static const struct drive_list_entry drive_blacklist [] = {
 };
 
 /**
- *	in_drive_list	-	look for drive in black/white list
+ *	ide_in_drive_list	-	look for drive in black/white list
  *	@id: drive identifier
  *	@drive_table: list to inspect
  *
@@ -147,7 +142,7 @@ static const struct drive_list_entry drive_blacklist [] = {
  *	Returns 1 if the drive is found in the table.
  */
 
-static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table)
+int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table)
 {
 	for ( ; drive_table->id_model ; drive_table++)
 		if ((!strcmp(drive_table->id_model, id->model)) &&
@@ -157,6 +152,8 @@ static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *d
 	return 0;
 }
 
+EXPORT_SYMBOL_GPL(ide_in_drive_list);
+
 /**
  *	ide_dma_intr	-	IDE DMA interrupt handler
  *	@drive: the drive the interrupt is for
@@ -663,7 +660,7 @@ int __ide_dma_bad_drive (ide_drive_t *drive)
 {
 	struct hd_driveid *id = drive->id;
 
-	int blacklist = in_drive_list(id, drive_blacklist);
+	int blacklist = ide_in_drive_list(id, drive_blacklist);
 	if (blacklist) {
 		printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n",
 				    drive->name, id->model);
@@ -677,7 +674,7 @@ EXPORT_SYMBOL(__ide_dma_bad_drive);
 int __ide_dma_good_drive (ide_drive_t *drive)
 {
 	struct hd_driveid *id = drive->id;
-	return in_drive_list(id, drive_whitelist);
+	return ide_in_drive_list(id, drive_whitelist);
 }
 
 EXPORT_SYMBOL(__ide_dma_good_drive);

drivers/ide/mips/Makefile

@@ -1 +1,4 @@
 obj-$(CONFIG_BLK_DEV_IDE_SWARM)		+= swarm.o
+obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
+
+EXTRA_CFLAGS    := -Idrivers/ide

drivers/ide/pci/sgiioc4.c

@@ -622,12 +622,18 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 	ide_hwif_t *hwif;
 	int h;
 
+	/*
+	 * Find an empty HWIF; if none available, return -ENOMEM.
+	 */
 	for (h = 0; h < MAX_HWIFS; ++h) {
 		hwif = &ide_hwifs[h];
-		/* Find an empty HWIF */
 		if (hwif->chipset == ide_unknown)
 			break;
 	}
+	if (h == MAX_HWIFS) {
+		printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name);
+		return -ENOMEM;
+	}
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
 	base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;

drivers/ide/pci/via82cxxx.c

@@ -80,6 +80,7 @@ static struct via_isa_bridge {
 	u16 flags;
 } via_isa_bridges[] = {
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },

drivers/input/mouse/alps.c

@@ -42,7 +42,7 @@ static struct alps_model_info alps_model_data[] = {
 	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, 0 },
+	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		/* Fujitsu Siemens S6010 */
 	{ { 0x63, 0x02, 0x3c },	0x8f, 0x8f, ALPS_WHEEL },		/* Toshiba Satellite S2400-103 */
 	{ { 0x63, 0x02, 0x50 },	0xef, 0xef, ALPS_FW_BK_1 },		/* NEC Versa L320 */
 	{ { 0x63, 0x02, 0x64 },	0xf8, 0xf8, 0 },

drivers/mmc/mmc.c

@@ -679,7 +679,15 @@ static void mmc_idle_cards(struct mmc_host *host)
 }
 
 /*
- * Apply power to the MMC stack.
+ * Apply power to the MMC stack.  This is a two-stage process.
+ * First, we enable power to the card without the clock running.
+ * We then wait a bit for the power to stabilise.  Finally,
+ * enable the bus drivers and clock to the card.
+ *
+ * We must _NOT_ enable the clock prior to power stablising.
+ *
+ * If a host does all the power sequencing itself, ignore the
+ * initial MMC_POWER_UP stage.
  */
 static void mmc_power_up(struct mmc_host *host)
 {

drivers/scsi/ibmvscsi/ibmvscsi.h

@@ -100,7 +100,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 void ibmvscsi_release_crq_queue(struct crq_queue *queue,
 				struct ibmvscsi_host_data *hostdata,
 				int max_requests);
-void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
+int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 			      struct ibmvscsi_host_data *hostdata);
 
 void ibmvscsi_handle_crq(struct viosrp_crq *crq,

drivers/scsi/ibmvscsi/iseries_vscsi.c

@@ -117,9 +117,10 @@ void ibmvscsi_release_crq_queue(struct crq_queue *queue,
  *
  * no-op for iSeries
  */
-void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
+int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 			      struct ibmvscsi_host_data *hostdata)
 {
+	return 0;
 }
 
 /**

drivers/scsi/ibmvscsi/rpa_vscsi.c

@@ -230,6 +230,11 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,
 				queue->msg_token, PAGE_SIZE);
+	if (rc == H_Resource) 
+		/* maybe kexecing and resource is busy. try a reset */
+		rc = ibmvscsi_reset_crq_queue(queue,
+					      hostdata);
+
 	if (rc == 2) {
 		/* Adapter is good, but other end is not ready */
 		printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n");
@@ -281,7 +286,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
  * @hostdata:	ibmvscsi_host_data of host
  *
  */
-void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
+int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 			      struct ibmvscsi_host_data *hostdata)
 {
 	int rc;
@@ -309,4 +314,5 @@ void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 		printk(KERN_WARNING
 		       "ibmvscsi: couldn't register crq--rc 0x%x\n", rc);
 	}
+	return rc;
 }

drivers/scsi/megaraid.c

@@ -664,7 +664,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy)
 					sg->offset;
 			} else
 				buf = cmd->request_buffer;
-			memset(cmd->request_buffer, 0, cmd->cmnd[4]);
+			memset(buf, 0, cmd->cmnd[4]);
 			if (cmd->use_sg) {
 				struct scatterlist *sg;
 

drivers/scsi/qla2xxx/qla_def.h

@@ -2476,17 +2476,9 @@ typedef struct scsi_qla_host {
  */
 #define LOOP_TRANSITION(ha) \
 	(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
-	 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
+	 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
-
-#define LOOP_NOT_READY(ha) \
-	((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
-	  test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || \
-	  test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
-	  test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \
 	 atomic_read(&ha->loop_state) == LOOP_DOWN)
 
-#define LOOP_RDY(ha)	(!LOOP_NOT_READY(ha))
-
 #define TGT_Q(ha, t) (ha->otgt[t])
 
 #define to_qla_host(x)		((scsi_qla_host_t *) (x)->hostdata)

drivers/scsi/qla2xxx/qla_init.c

@@ -1259,7 +1259,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha)
 	rval = qla2x00_get_adapter_id(ha,
 	    &loop_id, &al_pa, &area, &domain, &topo);
 	if (rval != QLA_SUCCESS) {
-		if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) ||
+		if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) ||
 		    (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
 			DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
 			    __func__, ha->host_no));
@@ -1796,7 +1796,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha)
 	}
 
 	if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
-		if (LOOP_NOT_READY(ha)) {
+		if (LOOP_TRANSITION(ha)) {
 			rval = QLA_FUNCTION_FAILED;
 		} else {
 			rval = qla2x00_configure_fabric(ha);
@@ -2369,7 +2369,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 		if (qla2x00_is_reserved_id(ha, loop_id))
 			continue;
 
-		if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha))
+		if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha))
 			break;
 
 		if (swl != NULL) {

drivers/scsi/qla2xxx/qla_isr.c

@@ -909,6 +909,21 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 			resid = resid_len;
 			cp->resid = resid;
 			CMD_RESID_LEN(cp) = resid;
+
+			if (!lscsi_status &&
+			    ((unsigned)(cp->request_bufflen - resid) <
+			     cp->underflow)) {
+				qla_printk(KERN_INFO, ha,
+				    "scsi(%ld:%d:%d:%d): Mid-layer underflow "
+				    "detected (%x of %x bytes)...returning "
+				    "error status.\n", ha->host_no,
+				    cp->device->channel, cp->device->id,
+				    cp->device->lun, resid,
+				    cp->request_bufflen);
+
+				cp->result = DID_ERROR << 16;
+				break;
+			}
 		}
 		cp->result = DID_OK << 16 | lscsi_status;
 

drivers/scsi/scsi_error.c

@@ -422,10 +422,15 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
  **/
 static void scsi_eh_done(struct scsi_cmnd *scmd)
 {
+	struct completion     *eh_action;
+
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s scmd: %p result: %x\n",
 			__FUNCTION__, scmd, scmd->result));
-	complete(scmd->device->host->eh_action);
+
+	eh_action = scmd->device->host->eh_action;
+	if (eh_action)
+		complete(eh_action);
 }
 
 /**

drivers/scsi/scsi_lib.c

@@ -1085,6 +1085,26 @@ static void scsi_generic_done(struct scsi_cmnd *cmd)
 	scsi_io_completion(cmd, cmd->result == 0 ? cmd->bufflen : 0, 0);
 }
 
+void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries)
+{
+	struct request *req = cmd->request;
+
+	BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
+	memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
+	cmd->cmd_len = req->cmd_len;
+	if (!req->data_len)
+		cmd->sc_data_direction = DMA_NONE;
+	else if (rq_data_dir(req) == WRITE)
+		cmd->sc_data_direction = DMA_TO_DEVICE;
+	else
+		cmd->sc_data_direction = DMA_FROM_DEVICE;
+	
+	cmd->transfersize = req->data_len;
+	cmd->allowed = retries;
+	cmd->timeout_per_command = req->timeout;
+}
+EXPORT_SYMBOL_GPL(scsi_setup_blk_pc_cmnd);
+
 static int scsi_prep_fn(struct request_queue *q, struct request *req)
 {
 	struct scsi_device *sdev = q->queuedata;
@@ -1220,18 +1240,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
 				goto kill;
 			}
 		} else {
-			memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
+			scsi_setup_blk_pc_cmnd(cmd, 3);
-			cmd->cmd_len = req->cmd_len;
-			if (rq_data_dir(req) == WRITE)
-				cmd->sc_data_direction = DMA_TO_DEVICE;
-			else if (req->data_len)
-				cmd->sc_data_direction = DMA_FROM_DEVICE;
-			else
-				cmd->sc_data_direction = DMA_NONE;
-			
-			cmd->transfersize = req->data_len;
-			cmd->allowed = 3;
-			cmd->timeout_per_command = req->timeout;
 			cmd->done = scsi_generic_done;
 		}
 	}

drivers/scsi/sd.c

@@ -245,24 +245,10 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
 	 * SG_IO from block layer already setup, just copy cdb basically
 	 */
 	if (blk_pc_request(rq)) {
-		if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
+		scsi_setup_blk_pc_cmnd(SCpnt, SD_PASSTHROUGH_RETRIES);
-			return 0;
-
-		memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
-		SCpnt->cmd_len = rq->cmd_len;
-		if (rq_data_dir(rq) == WRITE)
-			SCpnt->sc_data_direction = DMA_TO_DEVICE;
-		else if (rq->data_len)
-			SCpnt->sc_data_direction = DMA_FROM_DEVICE;
-		else
-			SCpnt->sc_data_direction = DMA_NONE;
-
-		this_count = rq->data_len;
 		if (rq->timeout)
 			timeout = rq->timeout;
 
-		SCpnt->transfersize = rq->data_len;
-		SCpnt->allowed = SD_PASSTHROUGH_RETRIES;
 		goto queue;
 	}
 

drivers/scsi/sr.c

@@ -320,25 +320,11 @@ static int sr_init_command(struct scsi_cmnd * SCpnt)
 	 * these are already setup, just copy cdb basically
 	 */
 	if (SCpnt->request->flags & REQ_BLOCK_PC) {
-		struct request *rq = SCpnt->request;
+		scsi_setup_blk_pc_cmnd(SCpnt, MAX_RETRIES);
 
-		if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
+		if (SCpnt->timeout_per_command)
-			return 0;
+			timeout = SCpnt->timeout_per_command;
 
-		memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
-		SCpnt->cmd_len = rq->cmd_len;
-		if (!rq->data_len)
-			SCpnt->sc_data_direction = DMA_NONE;
-		else if (rq_data_dir(rq) == WRITE)
-			SCpnt->sc_data_direction = DMA_TO_DEVICE;
-		else
-			SCpnt->sc_data_direction = DMA_FROM_DEVICE;
-
-		this_count = rq->data_len;
-		if (rq->timeout)
-			timeout = rq->timeout;
-
-		SCpnt->transfersize = rq->data_len;
 		goto queue;
 	}
 

drivers/scsi/st.c

@@ -4194,27 +4194,10 @@ static void st_intr(struct scsi_cmnd *SCpnt)
  */
 static int st_init_command(struct scsi_cmnd *SCpnt)
 {
-	struct request *rq;
-
 	if (!(SCpnt->request->flags & REQ_BLOCK_PC))
 		return 0;
 
-	rq = SCpnt->request;
+	scsi_setup_blk_pc_cmnd(SCpnt, 0);
-	if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
-		return 0;
-
-	memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
-	SCpnt->cmd_len = rq->cmd_len;
-
-	if (rq_data_dir(rq) == WRITE)
-		SCpnt->sc_data_direction = DMA_TO_DEVICE;
-	else if (rq->data_len)
-		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
-	else
-		SCpnt->sc_data_direction = DMA_NONE;
-
-	SCpnt->timeout_per_command = rq->timeout;
-	SCpnt->transfersize = rq->data_len;
 	SCpnt->done = st_intr;
 	return 1;
 }

drivers/scsi/sym53c8xx_2/sym_hipd.c

@@ -1405,7 +1405,6 @@ static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget,
 		goal->iu = 0;
 		goal->dt = 0;
 		goal->qas = 0;
-		goal->period = 0;
 		goal->offset = 0;
 		return;
 	}
@@ -1465,7 +1464,8 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp
 	 * Many devices implement PPR in a buggy way, so only use it if we
 	 * really want to.
 	 */
-	if (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)) {
+	if (goal->offset &&
+	    (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) {
 		nego = NS_PPR;
 	} else if (spi_width(starget) != goal->width) {
 		nego = NS_WIDE;

fs/reiserfs/inode.c

@@ -32,6 +32,7 @@ void reiserfs_delete_inode(struct inode *inode)
 	    JOURNAL_PER_BALANCE_CNT * 2 +
 	    2 * REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb);
 	struct reiserfs_transaction_handle th;
+	int err;
 
 	truncate_inode_pages(&inode->i_data, 0);
 
@@ -49,15 +50,13 @@ void reiserfs_delete_inode(struct inode *inode)
 		}
 		reiserfs_update_inode_transaction(inode);
 
-		if (reiserfs_delete_object(&th, inode)) {
+		err = reiserfs_delete_object(&th, inode);
-			up(&inode->i_sem);
-			goto out;
-		}
 
 		/* Do quota update inside a transaction for journaled quotas. We must do that
 		 * after delete_object so that quota updates go into the same transaction as
 		 * stat data deletion */
-		DQUOT_FREE_INODE(inode);
+		if (!err) 
+			DQUOT_FREE_INODE(inode);
 
 		if (journal_end(&th, inode->i_sb, jbegin_count)) {
 			up(&inode->i_sem);
@@ -66,6 +65,12 @@ void reiserfs_delete_inode(struct inode *inode)
 
 		up(&inode->i_sem);
 
+		/* check return value from reiserfs_delete_object after
+		 * ending the transaction
+		 */
+		if (err)
+		    goto out;
+
 		/* all items of file are deleted, so we can remove "save" link */
 		remove_save_link(inode, 0 /* not truncate */ );	/* we can't do anything
 								 * about an error here */
@@ -2099,6 +2104,7 @@ int reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps)
 	struct page *page = NULL;
 	int error;
 	struct buffer_head *bh = NULL;
+	int err2;
 
 	reiserfs_write_lock(p_s_inode->i_sb);
 
@@ -2136,14 +2142,18 @@ int reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps)
 		   transaction of truncating gets committed - on reboot the file
 		   either appears truncated properly or not truncated at all */
 		add_save_link(&th, p_s_inode, 1);
-	error = reiserfs_do_truncate(&th, p_s_inode, page, update_timestamps);
+	err2 = reiserfs_do_truncate(&th, p_s_inode, page, update_timestamps);
-	if (error)
-		goto out;
 	error =
 	    journal_end(&th, p_s_inode->i_sb, JOURNAL_PER_BALANCE_CNT * 2 + 1);
 	if (error)
 		goto out;
 
+	/* check reiserfs_do_truncate after ending the transaction */
+	if (err2) {
+		error = err2;
+  		goto out;
+	}
+	
 	if (update_timestamps) {
 		error = remove_save_link(p_s_inode, 1 /* truncate */ );
 		if (error)

fs/reiserfs/journal.c

@@ -1039,6 +1039,10 @@ static int flush_commit_list(struct super_block *s,
 	}
 	atomic_dec(&journal->j_async_throttle);
 
+	/* We're skipping the commit if there's an error */
+	if (retval || reiserfs_is_journal_aborted(journal))
+		barrier = 0;
+
 	/* wait on everything written so far before writing the commit
 	 * if we are in barrier mode, send the commit down now
 	 */
@@ -1077,10 +1081,16 @@ static int flush_commit_list(struct super_block *s,
 	BUG_ON(atomic_read(&(jl->j_commit_left)) != 1);
 
 	if (!barrier) {
-		if (buffer_dirty(jl->j_commit_bh))
+		/* If there was a write error in the journal - we can't commit
-			BUG();
+		 * this transaction - it will be invalid and, if successful,
-		mark_buffer_dirty(jl->j_commit_bh);
+		 * will just end up propogating the write error out to
-		sync_dirty_buffer(jl->j_commit_bh);
+		 * the file system. */
+		if (likely(!retval && !reiserfs_is_journal_aborted (journal))) {
+			if (buffer_dirty(jl->j_commit_bh))
+				BUG();
+			mark_buffer_dirty(jl->j_commit_bh) ;
+			sync_dirty_buffer(jl->j_commit_bh) ;
+		}
 	} else
 		wait_on_buffer(jl->j_commit_bh);
 

include/asm-arm/elf.h

@@ -22,6 +22,8 @@ typedef unsigned long elf_freg_t[3];
 #define R_ARM_NONE	0
 #define R_ARM_PC24	1
 #define R_ARM_ABS32	2
+#define R_ARM_CALL	28
+#define R_ARM_JUMP24	29
 
 #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];

include/asm-mips/mach-au1x00/au1xxx_ide.h

@@ -74,9 +74,6 @@ typedef struct
         u8                      white_list, black_list;
         struct dbdma_cmd        *dma_table_cpu;
         dma_addr_t              dma_table_dma;
-        struct scatterlist      *sg_table;
-        int                     sg_nents;
-        int                     sg_dma_direction;
 #endif
         struct device           *dev;
 	int			irq;
@@ -87,11 +84,6 @@ typedef struct
 } _auide_hwif;
 
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-struct drive_list_entry {
-        const char * id_model;
-        const char * id_firmware;
-};
-
 /* HD white list */
 static const struct drive_list_entry dma_white_list [] = {
 /*
@@ -167,13 +159,9 @@ int __init auide_probe(void);
  * Multi-Word DMA + DbDMA functions
  */
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-
-        static int in_drive_list(struct hd_driveid *id,
-                                 const struct drive_list_entry *drive_table);
         static int auide_build_sglist(ide_drive_t *drive,  struct request *rq);
         static int auide_build_dmatable(ide_drive_t *drive);
         static int auide_dma_end(ide_drive_t *drive);
-        static void auide_dma_start(ide_drive_t *drive );
         ide_startstop_t auide_dma_intr (ide_drive_t *drive);
         static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command);
         static int auide_dma_setup(ide_drive_t *drive);
@@ -188,8 +176,6 @@ int __init auide_probe(void);
         static void auide_ddma_rx_callback(int irq, void *param,
                                            struct pt_regs *regs);
         static int auide_dma_off_quietly(ide_drive_t *drive);
-        static int auide_dma_timeout(ide_drive_t *drive);
-
 #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
 
 /*******************************************************************************
@@ -299,3 +285,11 @@ int __init auide_probe(void);
 #define SBC_IDE_MDMA2_TPM     (0x00<<6)
 #define SBC_IDE_MDMA2_TA      (0x12<<0)
 
+#define SBC_IDE_TIMING(mode) \
+         SBC_IDE_##mode##_TWCS | \
+         SBC_IDE_##mode##_TCSH | \
+         SBC_IDE_##mode##_TCSOFF | \
+         SBC_IDE_##mode##_TWP | \
+         SBC_IDE_##mode##_TCSW | \
+         SBC_IDE_##mode##_TPM | \
+         SBC_IDE_##mode##_TA

include/linux/ide.h

@@ -23,17 +23,6 @@
 #include <asm/io.h>
 #include <asm/semaphore.h>
 
-/*
- * This is the multiple IDE interface driver, as evolved from hd.c.
- * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
- * There can be up to two drives per interface, as per the ATA-2 spec.
- *
- * Primary i/f:    ide0: major=3;  (hda)         minor=0; (hdb)         minor=64
- * Secondary i/f:  ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
- * Tertiary i/f:   ide2: major=33; (hde)         minor=0; (hdf)         minor=64
- * Quaternary i/f: ide3: major=34; (hdg)         minor=0; (hdh)         minor=64
- */
-
 /******************************************************************************
  * IDE driver configuration options (play with these as desired):
  *
@@ -193,11 +182,6 @@ typedef unsigned char	byte;	/* used everywhere */
 #define WAIT_CMD	(10*HZ)	/* 10sec  - maximum wait for an IRQ to happen */
 #define WAIT_MIN_SLEEP	(2*HZ/100)	/* 20msec - minimum sleep time */
 
-#define HOST(hwif,chipset)					\
-{								\
-	return ((hwif)->chipset == chipset) ? 1 : 0;		\
-}
-
 /*
  * Check for an interrupt and acknowledge the interrupt status
  */
@@ -390,45 +374,6 @@ typedef union {
 	} b;
 } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
 
-/*
- * ATA-IDE Error Register
- *
- * mark		: Bad address mark
- * tzero	: Couldn't find track 0
- * abrt		: Aborted Command
- * mcr		: Media Change Request
- * id		: ID field not found
- * mce		: Media Change Event
- * ecc		: Uncorrectable ECC error
- * bdd		: dual meaing
- */
-typedef union {
-	unsigned all			:8;
-	struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-		unsigned mark		:1;
-		unsigned tzero		:1;
-		unsigned abrt		:1;
-		unsigned mcr		:1;
-		unsigned id		:1;
-		unsigned mce		:1;
-		unsigned ecc		:1;
-		unsigned bdd		:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-		unsigned bdd		:1;
-		unsigned ecc		:1;
-		unsigned mce		:1;
-		unsigned id		:1;
-		unsigned mcr		:1;
-		unsigned abrt		:1;
-		unsigned tzero		:1;
-		unsigned mark		:1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	} b;
-} ata_error_t;
-
 /*
  * ATA-IDE Select Register, aka Device-Head
  *
@@ -503,39 +448,6 @@ typedef union {
 	} b;
 } ata_status_t, atapi_status_t;
 
-/*
- * ATA-IDE Control Register
- *
- * bit0		: Should be set to zero
- * nIEN		: device INTRQ to host
- * SRST		: host soft reset bit
- * bit3		: ATA-2 thingy, Should be set to 1
- * reserved456	: Reserved
- * HOB		: 48-bit address ordering, High Ordered Bit
- */
-typedef union {
-	unsigned all			: 8;
-	struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-		unsigned bit0		: 1;
-		unsigned nIEN		: 1;
-		unsigned SRST		: 1;
-		unsigned bit3		: 1;
-		unsigned reserved456	: 3;
-		unsigned HOB		: 1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-		unsigned HOB		: 1;
-		unsigned reserved456	: 3;
-		unsigned bit3		: 1;
-		unsigned SRST		: 1;
-		unsigned nIEN		: 1;
-		unsigned bit0		: 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	} b;
-} ata_control_t;
-
 /*
  * ATAPI Feature Register
  *
@@ -617,39 +529,6 @@ typedef union {
 	} b;
 } atapi_error_t;
 
-/*
- * ATAPI floppy Drive Select Register
- *
- * sam_lun	: Logical unit number
- * reserved3	: Reserved
- * drv		: The responding drive will be drive 0 (0) or drive 1 (1)
- * one5		: Should be set to 1
- * reserved6	: Reserved
- * one7		: Should be set to 1
- */
-typedef union {
-	unsigned all			:8;
-	struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-		unsigned sam_lun	:3;
-		unsigned reserved3	:1;
-		unsigned drv		:1;
-		unsigned one5		:1;
-		unsigned reserved6	:1;
-		unsigned one7		:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-		unsigned one7		:1;
-		unsigned reserved6	:1;
-		unsigned one5		:1;
-		unsigned drv		:1;
-		unsigned reserved3	:1;
-		unsigned sam_lun	:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	} b;
-} atapi_select_t;
-
 /*
  * Status returned from various ide_ functions
  */
@@ -1101,10 +980,7 @@ typedef struct ide_driver_s {
 	int		(*end_request)(ide_drive_t *, int, int);
 	ide_startstop_t	(*error)(ide_drive_t *, struct request *rq, u8, u8);
 	ide_startstop_t	(*abort)(ide_drive_t *, struct request *rq);
-	int		(*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
 	ide_proc_entry_t	*proc;
-	void		(*ata_prebuilder)(ide_drive_t *);
-	void		(*atapi_prebuilder)(ide_drive_t *);
 	struct device_driver	gen_driver;
 } ide_driver_t;
 
@@ -1298,7 +1174,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *);
 extern void ide_timer_expiry(unsigned long);
 extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
 extern void do_ide_request(request_queue_t *);
-extern void ide_init_subdrivers(void);
 
 void ide_init_disk(struct gendisk *, ide_drive_t *);
 
@@ -1371,6 +1246,12 @@ void ide_init_sg_cmd(ide_drive_t *, struct request *);
 #define GOOD_DMA_DRIVE		1
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
+struct drive_list_entry {
+	const char *id_model;
+	const char *id_firmware;
+};
+
+int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
 int __ide_dma_bad_drive(ide_drive_t *);
 int __ide_dma_good_drive(ide_drive_t *);
 int ide_use_dma(ide_drive_t *);

include/linux/pci_ids.h

@@ -1244,6 +1244,7 @@
 #define PCI_DEVICE_ID_VIA_8378_0	0x3205
 #define PCI_DEVICE_ID_VIA_8783_0	0x3208
 #define PCI_DEVICE_ID_VIA_8237		0x3227
+#define PCI_DEVICE_ID_VIA_8251		0x3287
 #define PCI_DEVICE_ID_VIA_3296_0	0x0296
 #define PCI_DEVICE_ID_VIA_8231		0x8231
 #define PCI_DEVICE_ID_VIA_8231_4	0x8235

include/scsi/scsi_cmnd.h

@@ -151,5 +151,6 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
 extern void scsi_put_command(struct scsi_cmnd *);
 extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int);
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
+extern void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries);
 
 #endif /* _SCSI_SCSI_CMND_H */

init/Kconfig

@@ -256,6 +256,20 @@ config CPUSETS
 
 source "usr/Kconfig"
 
+config CC_OPTIMIZE_FOR_SIZE
+	bool "Optimize for size (Look out for broken compilers!)"
+	default y
+	depends on ARM || H8300 || EXPERIMENTAL
+	depends on !SPARC64
+	help
+	  Enabling this option will pass "-Os" instead of "-O2" to gcc
+	  resulting in a smaller kernel.
+
+	  WARNING: some versions of gcc may generate incorrect code with this
+	  option.  If problems are observed, a gcc upgrade may be needed.
+
+	  If unsure, say N.
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -338,18 +352,6 @@ config EPOLL
 	  Disabling this option will cause the kernel to be built without
 	  support for epoll family of system calls.
 
-config CC_OPTIMIZE_FOR_SIZE
-	bool "Optimize for size"
-	default y if ARM || H8300
-	help
-	  Enabling this option will pass "-Os" instead of "-O2" to gcc
-	  resulting in a smaller kernel.
-
-	  WARNING: some versions of gcc may generate incorrect code with this
-	  option.  If problems are observed, a gcc upgrade may be needed.
-
-	  If unsure, say N.
-
 config SHMEM
 	bool "Use full shmem filesystem" if EMBEDDED
 	default y

net/8021q/vlan_dev.c

@@ -165,6 +165,9 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 
 	skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */
 
+	/* Need to correct hardware checksum */
+	skb_postpull_rcsum(skb, vhdr, VLAN_HLEN);
+
 	/* Ok, lets check to make sure the device (dev) we
 	 * came in on is what this VLAN is attached to.
 	 */

net/ipv4/ip_gre.c

@@ -618,7 +618,7 @@ static int ipgre_rcv(struct sk_buff *skb)
 
 		skb->mac.raw = skb->nh.raw;
 		skb->nh.raw = __pskb_pull(skb, offset);
-		skb_postpull_rcsum(skb, skb->mac.raw, offset);
+		skb_postpull_rcsum(skb, skb->h.raw, offset);
 		memset(&(IPCB(skb)->opt), 0, sizeof(struct ip_options));
 		skb->pkt_type = PACKET_HOST;
 #ifdef CONFIG_NET_IPGRE_BROADCAST