ARM64: DT: Hisilicon SoC DT updates for 4.10

- Correct the hardware pin number of the usb node on the Hip06
 - Add the Hisilicon Hip07 D05 board dts binding
 - Add the initial dts for the Hip07 D05 board
 - Fix the warning for the node without reg propery on the Hip06
 - Fix the sas am max transmissions quirk property on the Hip06
 - Disable the sas0 and sas2 on D03 board
 - Add refclk node for SAS on the Hip06
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYKvD8AAoJEAvIV27ZiWZcIdgP/RXYCWB8yztd3K74qSJ8xydr
 SBKY77zXwQBHzmDEbB881pJOaaBKzO9uTHo6nbkWRoE/cMYONohc+cO7WkkY4Lav
 gMEJ9Ss7ckwCAjQAkzh4hHV4V8EMA1+aMDNbNR/slw+neQnzBuTMd4EERmve3Wzg
 d4exeYgXVWGZLWhfFxp9xwyDt8fn03LoYYgqkM6wFKKpCXFx6dDVvjZw/V7W5vn0
 GVBSxgam2BW4ug4/Q6ZlnBrNU1db8DzhGUfqXOd8569v8QUxBq19Gy1DP1eTEtCl
 5WvnOIUSDQ+1MEFIaybq9CIWcM792XoQEpV9OI1EouAOYN4JeAiutGPQY0seyEIF
 X1jIPBteetqLtXSf3uQdYf8hVmTMNZp+/f/jRWK6K/BPgeVts0N9t1jqhcSMzOaH
 cneUkCuXsN4crBzBszhSsSPNMg7vvuprJNJCepESdiA4lBpn/KKFRj3aDNOw+ev3
 dpC6Rn0htzeg4wWWez9MptlXnMhRoL01FR+0nNy4R3FB4OEphzzMZuTWEAe7EyKA
 wwPG0u2WqR8nqFgk7iphHcoI1/NevSr0HbxRl0dWZ2UDZtESvSseZl0AEQRTU2ES
 /rg9S6ShNQvQI9bHhITIXixZ07gpyM/TPbJlAUp6PHtxwiVpLoDsCQEzCYnktFl+
 S/4pvu6yetne9bIPz59s
 =MVHS
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm64-dt-4.10' of git://github.com/hisilicon/linux-hisi into next/dt64

ARM64: DT: Hisilicon SoC DT updates for 4.10

- Correct the hardware pin number of the usb node on the Hip06
- Add the Hisilicon Hip07 D05 board dts binding
- Add the initial dts for the Hip07 D05 board
- Fix the warning for the node without reg propery on the Hip06
- Fix the sas am max transmissions quirk property on the Hip06
- Disable the sas0 and sas2 on D03 board
- Add refclk node for SAS on the Hip06

* tag 'hisi-arm64-dt-4.10' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisi: add refclk node to hip06 dts files for SAS
  arm64: dts: hisi: disable sas0 and sas2 for d03
  arm64: dts: hisi: fix hip06 sas am-max-trans quirk
  arm64: dts: hip06: Fix no reg property warning
  arm64: dts: hisilicon: Add initial dts for Hip07 D05 board
  Documentation: arm64: Add Hisilicon Hip07 D05 dts binding
  arm64: dts: hip06: Correct hardware pin number of usb node

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -28,6 +28,10 @@ HiP06 D03 Board
 Required root node properties:
 	- compatible = "hisilicon,hip06-d03";
 
+HiP07 D05 Board
+Required root node properties:
+	- compatible = "hisilicon,hip07-d05";
+
 Hisilicon system controller
 
 Required properties:

arch/arm64/boot/dts/hisilicon/Makefile

@@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
 dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
 dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/hisilicon/hip06-d03.dts

@@ -41,18 +41,10 @@
 	status = "ok";
 };
 
-&sas0 {
-	status = "ok";
-};
-
 &sas1 {
 	status = "ok";
 };
 
-&sas2 {
-	status = "ok";
-};
-
 &usb_ohci {
 	status = "ok";
 };

arch/arm64/boot/dts/hisilicon/hip06.dtsi

@@ -318,11 +318,17 @@
 		#size-cells = <2>;
 		ranges;
 
+		refclk: refclk {
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			#clock-cells = <0>;
+		};
+
 		usb_ohci: ohci@a7030000 {
 			compatible = "generic-ohci";
 			reg = <0x0 0xa7030000 0x0 0x10000>;
 			interrupt-parent = <&mbigen_usb>;
-			interrupts = <64 4>;
+			interrupts = <640 4>;
 			dma-coherent;
 			status = "disabled";
 		};
@@ -331,7 +337,7 @@
 			compatible = "generic-ehci";
 			reg = <0x0 0xa7020000 0x0 0x10000>;
 			interrupt-parent = <&mbigen_usb>;
-			interrupts = <65 4>;
+			interrupts = <641 4>;
 			dma-coherent;
 			status = "disabled";
 		};
@@ -508,7 +514,7 @@
 			};
 		};
 
-		eth0: ethernet@4{
+		eth0: ethernet-4{
 			compatible = "hisilicon,hns-nic-v2";
 			ae-handle = <&dsaf0>;
 			port-idx-in-ae = <4>;
@@ -517,7 +523,7 @@
 			dma-coherent;
 		};
 
-		eth1: ethernet@5{
+		eth1: ethernet-5{
 			compatible = "hisilicon,hns-nic-v2";
 			ae-handle = <&dsaf0>;
 			port-idx-in-ae = <5>;
@@ -526,7 +532,7 @@
 			dma-coherent;
 		};
 
-		eth2: ethernet@0{
+		eth2: ethernet-0{
 			compatible = "hisilicon,hns-nic-v2";
 			ae-handle = <&dsaf0>;
 			port-idx-in-ae = <0>;
@@ -535,7 +541,7 @@
 			dma-coherent;
 		};
 
-		eth3: ethernet@1{
+		eth3: ethernet-1{
 			compatible = "hisilicon,hns-nic-v2";
 			ae-handle = <&dsaf0>;
 			port-idx-in-ae = <1>;
@@ -552,6 +558,7 @@
 			ctrl-reset-reg = <0xa60>;
 			ctrl-reset-sts-reg = <0x5a30>;
 			ctrl-clock-ena-reg = <0x338>;
+			clocks = <&refclk 0>;
 			queue-count = <16>;
 			phy-count = <8>;
 			dma-coherent;
@@ -590,10 +597,11 @@
 			reg = <0 0xa2000000 0 0x10000>;
 			sas-addr = [50 01 88 20 16 00 00 00];
 			hisilicon,sas-syscon = <&pcie_subctl>;
-			am-max-trans;
+			hip06-sas-v2-quirk-amt;
 			ctrl-reset-reg = <0xa18>;
 			ctrl-reset-sts-reg = <0x5a0c>;
 			ctrl-clock-ena-reg = <0x318>;
+			clocks = <&refclk 0>;
 			queue-count = <16>;
 			phy-count = <8>;
 			dma-coherent;
@@ -635,6 +643,7 @@
 			ctrl-reset-reg = <0xae0>;
 			ctrl-reset-sts-reg = <0x5a70>;
 			ctrl-clock-ena-reg = <0x3a8>;
+			clocks = <&refclk 0>;
 			queue-count = <16>;
 			phy-count = <9>;
 			dma-coherent;

arch/arm64/boot/dts/hisilicon/hip07-d05.dts

@@ -0,0 +1,66 @@
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip07.dtsi"
+
+/ {
+	model = "Hisilicon Hip07 D05 Development Board";
+	compatible = "hisilicon,hip07-d05";
+
+	/* the mem node will be updated by UEFI. */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+		numa-node-id = <0>;
+	};
+
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0 10>,
+				  <0 1 15>,
+				  <0 2 20>,
+				  <0 3 25>,
+				  <1 0 15>,
+				  <1 1 10>,
+				  <1 2 25>,
+				  <1 3 30>,
+				  <2 0 20>,
+				  <2 1 25>,
+				  <2 2 10>,
+				  <2 3 15>,
+				  <3 0 25>,
+				  <3 1 30>,
+				  <3 2 15>,
+				  <3 3 10>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "ok";
+};
+
+&usb_ohci {
+	status = "ok";
+};
+
+&usb_ehci {
+	status = "ok";
+};