Add ACL core infrastructure for Spectrum ASIC. This infra provides an
abstraction layer over specific HW implementations. There are two basic
objects used. One is "rule" and the second is "ruleset" which serves as a
container of multiple rules. In general, within one ruleset the rules are
allowed to have multiple priorities and masks. Each ruleset is bound to
either ingress or egress a of port netdevice.
The initial TCAM implementation is very simple and limited. It utilizes
parman lsort manager to take care of TCAM region layout.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces a infrastructure for management of linear priority
areas. Priority order in an array matters, however order of items inside
a priority group does not matter.
As an initial implementation, L-sort algorithm is used. It is quite
trivial. More advanced algorithm called P-sort will be introduced as a
follow-up. The infrastructure is prepared for other algos.
Alongside this, a testing module is introduced as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to list_for_each_entry_continue and its reverse variant
list_for_each_entry_continue_reverse, introduce reverse helper for
list_for_each_entry_from.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add couple of resource limits related to ACL.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce basic set of Spectrum flexible key blocks. It contains blocks
needed to carry all elements defined so far.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each entry which is matched during ACL lookup points to an action set.
This action set contains up to three separate actions. If more actions
are needed to be chained, the extended set is created to hold them
in KVD linear area.
This patch implements handling of sets and encoding of actions.
Currectly, only two actions are supported. Drop and forward. Forward
action uses PBS pointer to KVD linear area, so the action code needs to
take care of this as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware supports matching on so called "flexible keys". The idea is to
assemble an optimal key to use for matching according to the fields in
packet (elements) requested by user. Certain sets of elements are
combined into pre-defined blocks. There is a picker to find needed blocks.
Keys consist of 1..n blocks.
Alongside with that, an initial portion of elements is introduced in order
to be able to offload basic cls_flower rules.
Picked keys are cached so multiple rules could share them.
There is an encode function provided that takes care of encoding key and
mask values according to given key.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PEFA register is used for accessing an extended flexible action entry
in the central KVD Linear Database.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PPBS register retrieves and sets Policy Based Switching Table entries.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PRCR register is used for accessing rules within a TCAM region.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PPBT is used for configuration of the Port Binding Table.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PTCE-V2 register is used for accessing rules within a TCAM region.
It is a new version of PTCE in order to support wider key, mask and
action within a TCAM region.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PTAR register is used for allocation of regions in the TCAM.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PAGT register is used for configuration of the ACL Group Table.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PACL register is used for configuration of the ACL.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sometimes it is handy to get a pointer to a char buffer item and use it
direcly to write/read data. So add these helpers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Item heplers for 8bit values are needed, let's add them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function bond_info_query alwarys returns 0. As such, in the function
bond_do_ioctl, it is not necessary to check the returned value. So the
interface type of the function bond_info_query is changed to void. The
redundant check is removed.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik diagnosed following problem :
I was seeing random disconnects while testing NBD over loopback.
This turned out to be because NBD sets pfmemalloc on it's socket,
however the receiving side is a user space application so does not
have pfmemalloc set on its socket. This means that
sk_filter_trim_cap will simply drop this packet, under the
assumption that the other side will simply retransmit. Well we do
retransmit, and then the packet is just dropped again for the same
reason.
It seems the better way to address this problem is to clear pfmemalloc
in the TCP transmit path. pfmemalloc strict control really makes sense
on the receive path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In linux-4.5, busy polling was implemented in core
NAPI stack, meaning that all custom implementation can
be removed from drivers.
Not only we remove lot of code, we also remove one spin_lock()
from driver fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compared to custom busy_poll, the generic NAPI one is simpler and
removes a lot of code. It removes one atomic in the fast path (when
busy poll is not in action) since we do not have to use an extra
spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compared to custom busy_poll, the generic NAPI one is better, since
it allows to use GRO, and it removes a lot of code and extra locked
operations in fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 stack does not set the protocol for local routes, so those routes show
up with proto "none":
$ ip -6 ro ls table local
local ::1 dev lo proto none metric 0 pref medium
local 2100:3:: dev lo proto none metric 0 pref medium
local 2100:3::4 dev lo proto none metric 0 pref medium
local fe80:: dev lo proto none metric 0 pref medium
...
Set rt6i_protocol to RTPROT_KERNEL for consistency with IPv4. Now routes
show up with proto "kernel":
$ ip -6 ro ls table local
local ::1 dev lo proto kernel metric 0 pref medium
local 2100:3:: dev lo proto kernel metric 0 pref medium
local 2100:3::4 dev lo proto kernel metric 0 pref medium
local fe80:: dev lo proto kernel metric 0 pref medium
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven suggested to improve trace_print_hex_seq() a bit after commit
2acae0d5b0 ("trace: add variant without spacing in trace_print_hex_seq")
in two ways: i) by adding a kdoc comment for the helper function
itself and ii) by renaming 'spacing' argument into 'concatenate'
to better denote that we don't add spaces between each hex bytes.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan will be taking care of switchdev code from now on.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu says:
====================
bridge: per vlan dst_metadata support
High level summary:
lwt and dst_metadata have enabled vxlan l3 deployments
to use a single vxlan netdev for multiple vnis eliminating the scalability
problem with using a single vxlan netdev per vni. This series tries to
do the same for vxlan netdevs in pure l2 bridged networks.
Use-case/deployment and details are below.
Deployment scerario details:
As we know VXLAN is used to build layer 2 virtual networks across the
underlay layer3 infrastructure. A VXLAN tunnel endpoint (VTEP)
originates and terminates VXLAN tunnels. And a VTEP can be a TOR switch
or a vswitch in the hypervisor. This patch series mainly
focuses on the TOR switch configured as a Vtep. Vxlan segment ID (vni)
along with vlan id is used to identify layer 2 segments in a vxlan
overlay network. Vxlan bridging is the function provided by Vteps to terminate
vxlan tunnels and map the vxlan vni to traditional end host vlan. This is
covered in the "VXLAN Deployment Scenarios" in sections 6 and 6.1 in RFC 7348.
To provide vxlan bridging function, a vtep has to map vlan to a vni. The rfc
says that the ingress VTEP device shall remove the IEEE 802.1Q VLAN tag in
the original Layer 2 packet if there is one before encapsulating the packet
into the VXLAN format to transmit it through the underlay network. The remote
VTEP devices have information about the VLAN in which the packet will be
placed based on their own VLAN-to-VXLAN VNI mapping configurations.
Existing solution:
Without this patch series one can deploy such a vtep configuration by
adding the local ports and vxlan netdevs into a vlan filtering bridge.
The local ports are configured as trunk ports carrying all vlans.
A vxlan netdev per vni is added to the bridge. Vlan mapping to vni is
achieved by configuring the vlan as pvid on the corresponding vxlan netdev.
The vxlan netdev only receives traffic corresponding to the vlan it is mapped
to. This configuration maps traffic belonging to a vlan to the corresponding
vxlan segment.
-----------------------------------
| bridge |
| |
-----------------------------------
|100,200 |100 (pvid) |200 (pvid)
| | |
swp1 vxlan1000 vxlan2000
This provides the required vxlan bridging function but poses a
scalability problem with using a separate vxlan netdev for each vni.
Solution in this patch series:
The Goal is to use a single vxlan device to carry all vnis similar
to the vxlan collect metadata mode but additionally allowing the bridge
and vxlan driver to carry all the forwarding information and also learn.
This implementation uses the existing dst_metadata infrastructure to map
vlan to a tunnel id.
- vxlan driver changes:
- enable collect metadata mode to be used with learning,
replication and fdb
- A single fdb table hashed by (mac, vni)
- rx path already has the vni
- tx path expects a vni in the packet with dst_metadata and relies
on learnt or static forwarding information table to forward the packet
- Bridge driver changes: per vlan dst_metadata support:
- Our use case is vxlan and 1-1 mapping between vlan and vni, but I have
kept the api generic for any tunnel info
- Uapi to configure/unconfigure/dump per vlan tunnel data
- new bridge port flag to turn this feature on/off. off by default
- ingress hook:
- if port is a tunnel port, use tunnel info in
attached dst_metadata to map it to a local vlan
- egress hook:
- if port is a tunnel port, use tunnel info attached to vlan
to set dst_metadata on the skb
Other approaches tried and vetoed:
- tc vlan push/pop and tunnel metadata dst:
- though tc can be used to do part of this, these patches address a deployment
case where bridge driver vlan filtering and forwarding information
database along with vxlan driver forwarding information table and learning
are required.
- making vxlan driver understand vlan-vni mapping:
- I had a series almost ready with this one but soon realized
it duplicated a lot of vlan handling code in the vxlan driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- ingress hook:
- if port is a tunnel port, use tunnel info in
attached dst_metadata to map it to a local vlan
- egress hook:
- if port is a tunnel port, use tunnel info attached to
vlan to set dst_metadata on the skb
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to attach per vlan tunnel info dst
metadata. This enables bridge driver to map vlan to tunnel_info
at ingress and egress. It uses the kernel dst_metadata infrastructure.
The initial use case is vlan to vni bridging, but the api is generic
to extend to any tunnel_info in the future:
- Uapi to configure/unconfigure/dump per vlan tunnel data
- netlink functions to configure vlan and tunnel_info mapping
- Introduces bridge port flag BR_LWT_VLAN to enable attach/detach
dst_metadata to bridged packets on ports. off by default.
- changes to existing code is mainly refactor some existing vlan
handling netlink code + hooks for new vlan tunnel code
- I have kept the vlan tunnel code isolated in separate files.
- most of the netlink vlan tunnel code is handling of vlan-tunid
ranges (follows the vlan range handling code). To conserve space
vlan-tunid by default are always dumped in ranges if applicable.
Use case:
example use for this is a vxlan bridging gateway or vtep
which maps vlans to vn-segments (or vnis).
iproute2 example (patched and pruned iproute2 output to just show
relevant fdb entries):
example shows same host mac learnt on two vni's and
vlan 100 maps to vni 1000, vlan 101 maps to vni 1001
before (netdev per vni):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge
00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge
00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self
after this patch with collect metdata in bridged mode (single netdev):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge
00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge
00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New nested netlink attribute to associate tunnel info per vlan.
This is used by bridge driver to send tunnel metadata to
bridge ports in vlan tunnel mode. This patch also adds new per
port flag IFLA_BRPORT_VLAN_TUNNEL to enable vlan tunnel mode.
off by default.
One example use for this is a vxlan bridging gateway or vtep
which maps vlans to vn-segments (or vnis). User can configure
per-vlan tunnel information which the bridge driver can use
to bridge vlan into the corresponding vn-segment.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vxlan COLLECT_METADATA mode today solves the per-vni netdev
scalability problem in l3 networks. It expects all forwarding
information to be present in dst_metadata. This patch series
enhances collect metadata mode to include the case where only
vni is present in dst_metadata, and the vxlan driver can then use
the rest of the forwarding information datbase to make forwarding
decisions. There is no change to default COLLECT_METADATA
behaviour. These changes only apply to COLLECT_METADATA when
used with the bridging use-case with a special dst_metadata
tunnel info flag (eg: where vxlan device is part of a bridge).
For all this to work, the vxlan driver will need to now support a
single fdb table hashed by mac + vni. This series essentially makes
this happen.
use-case and workflow:
vxlan collect metadata device participates in bridging vlan
to vn-segments. Bridge driver above the vxlan device,
sends the vni corresponding to the vlan in the dst_metadata.
vxlan driver will lookup forwarding database with (mac + vni)
for the required remote destination information to forward the
packet.
Changes introduced by this patch:
- allow learning and forwarding database state in vxlan netdev in
COLLECT_METADATA mode. Current behaviour is not changed
by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used
to support the new bridge friendly mode.
- A single fdb table hashed by (mac, vni) to allow fdb entries with
multiple vnis in the same fdb table
- rx path already has the vni
- tx path expects a vni in the packet with dst_metadata
- prior to this series, fdb remote_dsts carried remote vni and
the vxlan device carrying the fdb table represented the
source vni. With the vxlan device now representing multiple vnis,
this patch adds a src vni attribute to the fdb entry. The remote
vni already uses NDA_VNI attribute. This patch introduces
NDA_SRC_VNI netlink attribute to represent the src vni in a multi
vni fdb table.
iproute2 example (patched and pruned iproute2 output to just show
relevant fdb entries):
example shows same host mac learnt on two vni's.
before (netdev per vni):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self
after this patch with collect metadata in bridged mode (single netdev):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New ip_tunnel_info flag to represent bridged tunnel metadata.
Used by bridge driver later in the series to pass per vlan dst
metadata to bridge ports.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi says:
====================
Extract IFE logic to module
Extract ife logic from the tc_ife action into an independent module, and
make the tc_ife action use it. This way, the ife encapsulation can be used
by other modules other than tc_ife action.
v1->v2:
Fix duplicate symbol error by introducing a new patch that makes the
original symbol static.
The symbol ife_tlv_meta_extract is exported in act_ife, though not being
used by any other module. As the symbol is being moved to the new ife
module, introducing the new module creates duplicate symbol. To fix it,
add a new patch (1/3) that makes the ife_tlv_meta_extract symbol static in
act_ife, thus the symbol does not collide.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the encode/decode functionality from the ife module instead of using
implementation inside the act_ife.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module is responsible for the ife encapsulation protocol
encode/decode logics. That module can:
- ife_encode: encode skb and reserve space for the ife meta header
- ife_decode: decode skb and extract the meta header size
- ife_tlv_meta_encode - encodes one tlv entry into the reserved ife
header space.
- ife_tlv_meta_decode - decodes one tlv entry from the packet
- ife_tlv_meta_next - advance to the next tlv
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the function ife_tlv_meta_encode is not used by any other module,
unexport it and make it static for the act_ife module.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Small cleanup factorizing code doing the TCP_MAXSEG clamping.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On large SMP builds, we can run into a build warning:
drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_set_irq_affinity.isra.27':
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1242:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
The solution here is to use cpumask_var_t, which can use dynamic
allocation when CONFIG_CPUMASK_OFFSTACK is enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generic NAPI busy polling allows us to remove custom implementations
found in drivers.
It is possible further optimization could be done by testing
napi_complete_done() return value.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without any uld being loaded, uld_txq_info[] will be NULL. uld_send()
is also used for sending control work requests(for eg: setting filter)
that dont require any ulds to be loaded. Hence move uld_txq_info[]
assignment after ctrl_xmit().
Also added a NULL check for uld_txq_info[].
Fixes: 94cdb8bb99 (cxgb4: Add support for dynamic allocation
of resources for ULD).
Signed-off-by: Arjun V <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In linux-4.5, busy polling was implemented in core
NAPI stack, meaning that all custom implementation can
be removed from drivers.
Not only we remove lot's of tricky code, we also remove
one lock operation in fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Acked-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In linux-4.5, busy polling was implemented in core
NAPI stack, meaning that all custom implementation can
be removed from drivers.
Not only we remove lot's of tricky code, we also remove
one lock operation in fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Acked-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Debugging issues caused by pfmemalloc is often tedious.
Add a new SNMP counter to more easily diagnose these problems.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nothing in devinet.c relies on fib_lookup.h; remove it from the includes
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When __alloc_skb() allocates an skb from fast clone cache,
setting pfmemalloc on the clone is not needed.
Clone will be properly initialized later at skb_clone() time,
including pfmemalloc field, as it is included in the
headers_start/headers_end section which is fully copied.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
MV88E6390 fixes
Two patches, which have been posted before. Fix simple issues in the
mv88e6390 support. These don't need to go to stable, since the
mv88e6390 support in stable is insufficient to be usable.
To apply cleanly, these patches rely on "net: dsa: mv88e6xxx:
Workaround missing PHY".
v2: Added Reviewed-by.
Removed a redundant "the"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to enable 2.5Gbps mode, we need the base speed of 10G, plus
the Alt bit setting. Fix a typ0 that used 1Gb base speed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MV88E6390 family uses a different ATU age timer coefficient.
Fix the info structures.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on
the zii-devel-b board. Add support for it to the Marvell PHY driver.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most likely a copy & paste error in referenced commit.
Restore the debug message to what it was before.
Fixes: f573c0b9c4 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>