[ Upstream commit 977c7114eb ]
On receving an incomplete message, the existing code stores the
remaining length of the cloned skb in the early_eaten field instead of
incrementing the value returned by __strp_recv. This defers invocation
of sock_rfree for the current skb until the next invocation of
__strp_recv, which returns early_eaten if early_eaten is non-zero.
This behavior causes a stall when the current message occupies the very
tail end of a massive skb, and strp_peek/need_bytes indicates that the
remainder of the current message has yet to arrive on the socket. The
TCP receive buffer is totally full, causing the TCP window to go to
zero, so the remainder of the message will never arrive.
Incrementing the value returned by __strp_recv by the amount otherwise
stored in early_eaten prevents stalls of this nature.
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b6cfffa7ad ]
HW does not support Half-duplex mode in multi-queue
scenario. Fix it by not advertising the Half-Duplex
mode if multi-queue enabled.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ee1f47349 ]
When unplugging an r8152 adapter while the interface is UP, the NIC
becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes
napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes
netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to
napi_disable, but the napi is already deleted by disconnect above. So
the first while loop in napi_disable never finishes. This results in
complete deadlock of the network layer as there is rtnl_mutex held by
unregister_netdev.
So avoid the call to napi_disable in rtl8152_close when the device is
already gone.
The other calls to usb_kill_urb, cancel_delayed_work_sync,
netif_stop_queue etc. seem to be fine. The urb and netdev is not
destroyed yet.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7e197edd0 ]
This module exposes two USB configurations: a QMI+AT capable setup on
USB config #1 and a MBIM capable setup on USB config #2.
By default the kernel will choose the MBIM capable configuration as
long as the cdc_mbim driver is available. This patch adds support for
the QMI port in the secondary configuration.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb7858ba11 ]
Memory size is limited in the kdump kernel environment. Allocation of more
msix-vectors (or queues) consumes few tens of MBs of memory, which might
lead to the kdump kernel failure.
This patch adds changes to limit the number of MSI-X vectors in kdump
kernel to minimum required value (i.e., 2 per engine).
Fixes: fe56b9e6a ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc9b27cdf7 ]
Use the correct size value while copying chassis/port id values.
Fixes: 6ad8c632e ("qed: Add support for query/config dcbx.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 538f8d00ba ]
By default, driver sets the eswitch mode incorrectly as VEB (virtual
Ethernet bridging).
Need to set VEB eswitch mode only when sriov is enabled, and it should be
to set NONE by default. The patch incorporates this change.
Fixes: 0fefbfbaa ("qed*: Management firmware - notifications and defaults")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 82a4e71b15 ]
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode),
get-tsinfo() callback should return the software timestamp capabilities
instead of returning the error.
Fixes: 4c55215c ("qede: Add driver support for PTP")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8c43bd1706 ]
Similar to 69678bcd4d ("udp: fix SO_BINDTODEVICE"), TCP socket lookups
need to fail if dev_match is not true. Currently, a packet to a given port
can match a socket bound to device when it should not. In the VRF case,
this causes the lookup to hit a VRF socket and not a global socket
resulting in a response trying to go through the VRF when it should not.
Fixes: 3fa6f616a7 ("net: ipv4: add second dif to inet socket lookups")
Fixes: 4297a0ef08 ("net: ipv6: add second dif to inet6 socket lookups")
Reported-by: Lou Berger <lberger@labn.net>
Diagnosed-by: Renato Westphal <renato@opensourcerouting.org>
Tested-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 12b03558ce ]
After commit 88078d98d1 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
are friends"), sungem owners reported the infamous "eth0: hw csum failure"
message.
CHECKSUM_COMPLETE has in fact never worked for this driver, but this
was masked by the fact that upper stacks had to strip the FCS, and
therefore skb->ip_summed was set back to CHECKSUM_NONE before
my recent change.
Driver configures a number of bytes to skip when the chip computes
the checksum, and for some reason only half of the Ethernet header
was skipped.
Then a second problem is that we should strip the FCS by default,
unless the driver is updated to eventually support NETIF_F_RXFCS in
the future.
Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
or not, so that the admin can turn off rx checksum if wanted.
Many thanks to Andreas Schwab and Mathieu Malaterre for their
help in debugging this issue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e85dc8cb3 ]
When blackhole is used on top of classful qdisc like hfsc it breaks
qlen and backlog counters because packets are disappear without notice.
In HFSC non-zero qlen while all classes are inactive triggers warning:
WARNING: ... at net/sched/sch_hfsc.c:1393 hfsc_dequeue+0xba4/0xe90 [sch_hfsc]
and schedules watchdog work endlessly.
This patch return __NET_XMIT_BYPASS in addition to NET_XMIT_SUCCESS,
this flag tells upper layer: this packet is gone and isn't queued.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 271f7ff5aa ]
When using s/w buffer management, buffers are allocated and DMA mapped.
When doing so on an arm64 platform, an offset correction is applied on
the DMA address, before storing it in an Rx descriptor. The issue is
this DMA address is then used later in the Rx path without removing the
offset correction. Thus the DMA address is wrong, which can led to
various issues.
This patch fixes this by removing the offset correction from the DMA
address retrieved from the Rx descriptor before using it in the Rx path.
Fixes: 8d5047cf9c ("net: mvneta: Convert to be 64 bits compatible")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 603b7bcff8 ]
The NULL character was not set correctly for the string containing
the command length, this caused failures reading the output of the
command due to a random length. The fix is to initialize the output
length string.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d412c31dae ]
The command interface can work in two modes: Events and Polling.
In the general case, each time we invoke a command, a work is
queued to handle it.
When working in events, the interrupt handler completes the
command execution. On the other hand, when working in polling
mode, the work itself completes it.
Due to a bug in the work handler, a command could have been
completed by the interrupt handler, while the work handler
hasn't finished yet, causing the it to complete once again
if the command interface mode was changed from Events to
polling after the interrupt handler was called.
mlx5_unload_one()
mlx5_stop_eqs()
// Destroy the EQ before cmd EQ
...cmd_work_handler()
write_doorbell()
--> EVENT_TYPE_CMD
mlx5_cmd_comp_handler() // First free
free_ent(cmd, ent->idx)
complete(&ent->done)
<-- mlx5_stop_eqs //cmd was complete
// move to polling before destroying the last cmd EQ
mlx5_cmd_use_polling()
cmd->mode = POLL;
--> cmd_work_handler (continues)
if (cmd->mode == POLL)
mlx5_cmd_comp_handler() // Double free
The solution is to store the cmd->mode before writing the doorbell.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0efc856249 ]
In smartnic env, the host (PF) driver might not be an e-switch
manager, hence the FW will err on driver attempts to deal with
setting/unsetting the eswitch and as a result the overall setup
of sriov will fail.
Fix that by avoiding the operation if e-switch management is not
allowed for this driver instance. While here, move to use the
correct name for the esw manager capability name.
Fixes: 81848731ff ('net/mlx5: E-Switch, Add SR-IOV (FDB) support')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Guy Kushnir <guyk@mellanox.com>
Reviewed-by: Eli Cohen <eli@melloanox.com>
Tested-by: Eli Cohen <eli@melloanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8ffd569aaa ]
The check for cpu hit statistics was not returning immediate false for
any non vport rep netdev and hence we crashed (say on mlx5 probed VFs) if
user-space tool was calling into any possible netdev in the system.
Fix that by doing a proper check before dereferencing.
Fixes: 1d447a3914 ('net/mlx5e: Extendable vport representor netdev private data')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Eli Cohen <eli@melloanox.com>
Reviewed-by: Eli Cohen <eli@melloanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 733d3e5497 ]
In smartnic env, the host (PF) driver might not be an e-switch
manager, hence the switchdev mode representors are running on
the embedded cpu (EC) and not at the host.
As such, we should avoid dealing with vport representors if
not being esw manager.
While here, make sure to disallow eswitch switchdev related
setups through devlink if we are not esw managers.
Fixes: cb67b83292 ('net/mlx5e: Introduce SRIOV VF representors')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 64d7839af8 ]
When delta passed to gem_ptp_adjtime is negative, the sign is
maintained in the ns_to_timespec64 conversion. Hence timespec_add
should be used directly. timespec_sub will just subtract the negative
value thus increasing the time difference.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 603d4cf8fe ]
Since the addition of GRO for ESP, gro_receive can consume the skb and
return -EINPROGRESS. In that case, the lower layer GRO handler cannot
touch the skb anymore.
Commit 5f114163f2 ("net: Add a skb_gro_flush_final helper.") converted
some of the gro_receive handlers that can lead to ESP's gro_receive so
that they wouldn't access the skb when -EINPROGRESS is returned, but
missed other spots, mainly in tunneling protocols.
This patch finishes the conversion to using skb_gro_flush_final(), and
adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and
GUE.
Fixes: 5f114163f2 ("net: Add a skb_gro_flush_final helper.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ce4e70ff0 ]
To compute delays, better not use time of the day which can
be changed by admins or malicious programs.
Also change ccid3_first_li() to use s64 type for delta variable
to avoid potential overflows.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad088ec480 ]
The driver was combining the XDP_TX tail flush and XDP_REDIRECT
map flushing (xdp_do_flush_map). This is suboptimal, these two
flush operations should be kept separate.
Fixes: 11393cc9b9 ("xdp: Add batching support to redirect map")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30877961b1 ]
Commit 296d485680 ("ipvlan: inherit MTU from master device") adjusted
the mtu from the master device when creating a ipvlan device, but it
would also override the mtu value set in rtnl_create_link. It causes
IFLA_MTU param not to take effect.
So this patch is to not adjust the mtu if IFLA_MTU param is set when
creating a ipvlan device.
Fixes: 296d485680 ("ipvlan: inherit MTU from master device")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc9c2029e3 ]
The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags,
not 'gfp_t'. So don't pass GFP_KERNEL to it.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ffe64f1a6 ]
When doing device hotplug the sub channel must be async to avoid
deadlock issues because device is discovered in softirq context.
When doing changes to MTU and number of channels, the setup
must be synchronous to avoid races such as when MTU and device
settings are done in a single ip command.
Reported-by: Thomas Walker <Thomas.Walker@twosigma.com>
Fixes: 8195b1396e ("hv_netvsc: fix deadlock on hotplug")
Fixes: 732e49850c ("netvsc: fix race on sub channel creation")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ced9e19150 ]
pool can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue
'zatm_dev->pool_info' (local cap)
Fix this by sanitizing pool before using it to index
zatm_dev->pool_info
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9bbe60a67b ]
ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on
which they are to be sent. But it doesn't take ownership of those
packets from the sock (if any) which originally owned them. They should
remain owned by their actual sender until they've left the box.
There's a hack in pskb_expand_head() to avoid adjusting skb->truesize
for certain skbs, precisely to avoid messing up sk_wmem_alloc
accounting. Ideally that hack would cover the ATM use case too, but it
doesn't — skbs which aren't owned by any sock, for example PPP control
frames, still get their truesize adjusted when the low-level ATM driver
adds headroom.
This has always been an issue, it seems. The truesize of a packet
increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't
for normal traffic, only for control frames. So I think we just got away
with it, and we probably needed to send 2GiB of LCP echo frames before
the misaccounting would ever have caused a problem and caused
atm_may_send() to start refusing packets.
Commit 14afee4b60 ("net: convert sock.sk_wmem_alloc from atomic_t to
refcount_t") did exactly what it was intended to do, and turned this
mostly-theoretical problem into a real one, causing PPPoATM to fail
immediately as sk_wmem_alloc underflows and atm_may_send() *immediately*
starts refusing to allow new packets.
The least intrusive solution to this problem is to stash the value of
skb->truesize that was accounted to the VCC, in a new member of the
ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that
value instead of the then-current value of skb->truesize.
Fixes: 158f323b98 ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bc800e8b39 ]
The __alx_open function can be called from ndo_open, which is called
under RTNL, or from alx_resume, which isn't. Since commit d768319cd4,
we're calling the netif_set_real_num_{tx,rx}_queues functions, which
need to be called under RTNL.
This is similar to commit 0c2cc02e57 ("igb: Move the calls to set the
Tx and Rx queues into igb_open").
Fixes: d768319cd4 ("alx: enable multiple tx queues")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d59ad6eea upstream.
If one of the later memory allocations in rypto4xx_build_pdr()
fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.
crypto4xx_build_sdr() has the same issue with dev->sdr.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a728a196d2 upstream.
alg entries are only added to the list, after the registration
was successful. If the registration failed, it was never added
to the list in the first place.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5d6bc90c9 upstream.
In order to avoid triggering a NULL pointer dereference in
exynos_pcie_probe() a check must be put in place to detect if
the init_clk_resources hook is initialized before calling it.
Add the respective function pointer check in exynos_pcie_probe().
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6213c1f2a upstream.
The DMA controller regs actually point to DMA channel 0, so the write to
ENETDMA_CFG_REG will actually modify a random DMA channel.
Since DMA controller registers do not exist on BCM6345, guard the write
with the usual check for dma_has_sram.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c86b846ce upstream.
Check the return code of prepare_enable and change one last instance of
enable only to prepare_enable. Also properly disable and release the
clock in error paths and on remove for enetsw.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e4c56d41e upstream.
ip_alloc_sem should be taken in ocfs2_get_block() when reading file in
DIRECT mode to prevent concurrent access to extent tree with
ocfs2_dio_end_io_write(), which may cause BUGON in the following
situation:
read file 'A' end_io of writing file 'A'
vfs_read
__vfs_read
ocfs2_file_read_iter
generic_file_read_iter
ocfs2_direct_IO
__blockdev_direct_IO
do_blockdev_direct_IO
do_direct_IO
get_more_blocks
ocfs2_get_block
ocfs2_extent_map_get_blocks
ocfs2_get_clusters
ocfs2_get_clusters_nocache()
ocfs2_search_extent_list
return the index of record which
contains the v_cluster, that is
v_cluster > rec[i]->e_cpos.
ocfs2_dio_end_io
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem);
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
...
--> modify the rec[i]->e_cpos, resulting
in v_cluster < rec[i]->e_cpos.
BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos))
[alex.chen@huawei.com: v3]
Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Fixes: c15471f795 ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Gang He <ghe@suse.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 853bc26a7e upstream.
The subsystem.su_mutex is required while accessing the item->ci_parent,
otherwise, NULL pointer dereference to the item->ci_parent will be
triggered in the following situation:
add node delete node
sys_write
vfs_write
configfs_write_file
o2nm_node_store
o2nm_node_local_write
do_rmdir
vfs_rmdir
configfs_rmdir
mutex_lock(&subsys->su_mutex);
unlink_obj
item->ci_group = NULL;
item->ci_parent = NULL;
to_o2nm_cluster_from_node
node->nd_item.ci_parent->ci_parent
BUG since of NULL pointer dereference to nd_item.ci_parent
Moreover, the o2nm_cluster also should be protected by the
subsystem.su_mutex.
[alex.chen@huawei.com: v2]
Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com
Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.com
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2552428863 upstream.
Michal Kalderon has found some corner cases around device unload
with active NFS mounts that I didn't have the imagination to test
when xprtrdma device removal was added last year.
- The ULP device removal handler is responsible for deallocating
the PD. That wasn't clear to me initially, and my own testing
suggested it was not necessary, but that is incorrect.
- The transport destruction path can no longer assume that there
is a valid ID.
- When destroying a transport, ensure that ib_free_cq() is not
invoked on a CQ that was already released.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866 ("xprtrdma: Support unplugging an HCA from ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4f3388afd upstream.
Add support to specify platform specific transition_delay_us instead
of using the transition delay derived from PCC.
With commit 3d41386d55 (cpufreq: CPPC: Use transition_delay_us
depending transition_latency) we are setting transition_delay_us
directly and not applying the LATENCY_MULTIPLIER. Because of that,
on Qualcomm Centriq we can end up with a very high rate of frequency
change requests when using the schedutil governor (default
rate_limit_us=10 compared to an earlier value of 10000).
The PCC subspace describes the rate at which the platform can accept
commands on the CPPC's PCC channel. This includes read and write
command on the PCC channel that can be used for reasons other than
frequency transitions. Moreover the same PCC subspace can be used by
multiple freq domains and deriving transition_delay_us from it as we
do now can be sub-optimal.
Moreover if a platform does not use PCC for desired_perf register then
there is no way to compute the transition latency or the delay_us.
CPPC does not have a standard defined mechanism to get the transition
rate or the latency at the moment.
Given the above limitations, it is simpler to have a platform specific
transition_delay_us and rely on PCC derived value only if a platform
specific value is not available.
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Fixes: 3d41386d55 (cpufreq: CPPC: Use transition_delay_us depending transition_latency)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31d11b83b9 upstream.
In commit 471d557afe ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay"), on fsync, we started to always log all prealloc
extents beyond an inode's i_size in order to avoid losing them after a
power failure. However under some cases this can lead to the log replay
code to create duplicate extent items, with different lengths, in the
extent tree. That happens because, as of that commit, we can now log
extent items based on extent maps that are not on the "modified" list
of extent maps of the inode's extent map tree. Logging extent items based
on extent maps is used during the fast fsync path to save time and for
this to work reliably it requires that the extent maps are not merged
with other adjacent extent maps - having the extent maps in the list
of modified extents gives such guarantee.
Consider the following example, captured during a long run of fsstress,
which illustrates this problem.
We have inode 271, in the filesystem tree (root 5), for which all of the
following operations and discussion apply to.
A buffered write starts at offset 312391 with a length of 933471 bytes
(end offset at 1245862). At this point we have, for this inode, the
following extent maps with the their field values:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 376832, block_start 1106399232,
block_len 376832, orig_block_len 376832
em C, start 417792, orig_start 417792, len 782336, block_start
18446744073709551613, block_len 0, orig_block_len 0
em D, start 1200128, orig_start 1200128, len 835584, block_start
1106776064, block_len 835584, orig_block_len 835584
em E, start 2035712, orig_start 2035712, len 245760, block_start
1107611648, block_len 245760, orig_block_len 245760
Extent map A corresponds to a hole and extent maps D and E correspond to
preallocated extents.
Extent map D ends where extent map E begins (1106776064 + 835584 =
1107611648), but these extent maps were not merged because they are in
the inode's list of modified extent maps.
An fsync against this inode is made, which triggers the fast path
(BTRFS_INODE_NEEDS_FULL_SYNC is not set). This fsync triggers writeback
of the data previously written using buffered IO, and when the respective
ordered extent finishes, btrfs_drop_extents() is called against the
(aligned) range 311296..1249279. This causes a split of extent map D at
btrfs_drop_extent_cache(), replacing extent map D with a new extent map
D', also added to the list of modified extents, with the following
values:
em D', start 1249280, orig_start of 1200128,
block_start 1106825216 (= 1106776064 + 1249280 - 1200128),
orig_block_len 835584,
block_len 786432 (835584 - (1249280 - 1200128))
Then, during the fast fsync, btrfs_log_changed_extents() is called and
extent maps D' and E are removed from the list of modified extents. The
flag EXTENT_FLAG_LOGGING is also set on them. After the extents are logged
clear_em_logging() is called on each of them, and that makes extent map E
to be merged with extent map D' (try_merge_map()), resulting in D' being
deleted and E adjusted to:
em E, start 1249280, orig_start 1200128, len 1032192,
block_start 1106825216, block_len 1032192,
orig_block_len 245760
A direct IO write at offset 1847296 and length of 360448 bytes (end offset
at 2207744) starts, and at that moment the following extent maps exist for
our inode:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
block_len 937984, orig_block_len 937984
em E (prealloc), start 1249280, orig_start 1200128, len 1032192,
block_start 1106825216, block_len 1032192, orig_block_len 245760
The dio write results in drop_extent_cache() being called twice. The first
time for a range that starts at offset 1847296 and ends at offset 2035711
(length of 188416), which results in a double split of extent map E,
replacing it with two new extent maps:
em F, start 1249280, orig_start 1200128, block_start 1106825216,
block_len 598016, orig_block_len 598016
em G, start 2035712, orig_start 1200128, block_start 1107611648,
block_len 245760, orig_block_len 1032192
It also creates a new extent map that represents a part of the requested
IO (through create_io_em()):
em H, start 1847296, len 188416, block_start 1107423232, block_len 188416
The second call to drop_extent_cache() has a range with a start offset of
2035712 and end offset of 2207743 (length of 172032). This leads to
replacing extent map G with a new extent map I with the following values:
em I, start 2207744, orig_start 1200128, block_start 1107783680,
block_len 73728, orig_block_len 1032192
It also creates a new extent map that represents the second part of the
requested IO (through create_io_em()):
em J, start 2035712, len 172032, block_start 1107611648, block_len 172032
The dio write set the inode's i_size to 2207744 bytes.
After the dio write the inode has the following extent maps:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
block_len 937984, orig_block_len 937984
em F, start 1249280, orig_start 1200128, len 598016,
block_start 1106825216, block_len 598016, orig_block_len 598016
em H, start 1847296, orig_start 1200128, len 188416,
block_start 1107423232, block_len 188416, orig_block_len 835584
em J, start 2035712, orig_start 2035712, len 172032,
block_start 1107611648, block_len 172032, orig_block_len 245760
em I, start 2207744, orig_start 1200128, len 73728,
block_start 1107783680, block_len 73728, orig_block_len 1032192
Now do some change to the file, like adding a xattr for example and then
fsync it again. This triggers a fast fsync path, and as of commit
471d557afe ("Btrfs: fix loss of prealloc extents past i_size after fsync
log replay"), we use the extent map I to log a file extent item because
it's a prealloc extent and it starts at an offset matching the inode's
i_size. However when we log it, we create a file extent item with a value
for the disk byte location that is wrong, as can be seen from the
following output of "btrfs inspect-internal dump-tree":
item 1 key (271 EXTENT_DATA 2207744) itemoff 3782 itemsize 53
generation 22 type 2 (prealloc)
prealloc data disk byte 1106776064 nr 1032192
prealloc data offset 1007616 nr 73728
Here the disk byte value corresponds to calculation based on some fields
from the extent map I:
1106776064 = block_start (1107783680) - 1007616 (extent_offset)
extent_offset = 2207744 (start) - 1200128 (orig_start) = 1007616
The disk byte value of 1106776064 clashes with disk byte values of the
file extent items at offsets 1249280 and 1847296 in the fs tree:
item 6 key (271 EXTENT_DATA 1249280) itemoff 3568 itemsize 53
generation 20 type 2 (prealloc)
prealloc data disk byte 1106776064 nr 835584
prealloc data offset 49152 nr 598016
item 7 key (271 EXTENT_DATA 1847296) itemoff 3515 itemsize 53
generation 20 type 1 (regular)
extent data disk byte 1106776064 nr 835584
extent data offset 647168 nr 188416 ram 835584
extent compression 0 (none)
item 8 key (271 EXTENT_DATA 2035712) itemoff 3462 itemsize 53
generation 20 type 1 (regular)
extent data disk byte 1107611648 nr 245760
extent data offset 0 nr 172032 ram 245760
extent compression 0 (none)
item 9 key (271 EXTENT_DATA 2207744) itemoff 3409 itemsize 53
generation 20 type 2 (prealloc)
prealloc data disk byte 1107611648 nr 245760
prealloc data offset 172032 nr 73728
Instead of the disk byte value of 1106776064, the value of 1107611648
should have been logged. Also the data offset value should have been
172032 and not 1007616.
After a log replay we end up getting two extent items in the extent tree
with different lengths, one of 835584, which is correct and existed
before the log replay, and another one of 1032192 which is wrong and is
based on the logged file extent item:
item 12 key (1106776064 EXTENT_ITEM 835584) itemoff 3406 itemsize 53
refs 2 gen 15 flags DATA
extent data backref root 5 objectid 271 offset 1200128 count 2
item 13 key (1106776064 EXTENT_ITEM 1032192) itemoff 3353 itemsize 53
refs 1 gen 22 flags DATA
extent data backref root 5 objectid 271 offset 1200128 count 1
Obviously this leads to many problems and a filesystem check reports many
errors:
(...)
checking extents
Extent back ref already exists for 1106776064 parent 0 root 5 owner 271 offset 1200128 num_refs 1
extent item 1106776064 has multiple extent items
ref mismatch on [1106776064 835584] extent item 2, found 3
Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 2 wanted 1 back 0x55b1d0ad7680
Backref 1106776064 root 5 owner 271 offset 1200128 num_refs 0 not found in extent tree
Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 1 wanted 0 back 0x55b1d0ad4e70
Backref bytes do not match extent backref, bytenr=1106776064, ref bytes=835584, backref bytes=1032192
backpointer mismatch on [1106776064 835584]
checking free space cache
block group 1103101952 has wrong amount of free space
failed to load free space cache for block group 1103101952
checking fs roots
(...)
So fix this by logging the prealloc extents beyond the inode's i_size
based on searches in the subvolume tree instead of the extent maps.
Fixes: 471d557afe ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a8690ed6f upstream.
In commit 357d23c811a7 ("Remove the obsolete libibcm library")
in rdma-core [1], we removed obsolete library which used the
/dev/infiniband/ucmX interface.
Following multiple syzkaller reports about non-sanitized
user input in the UCMA module, the short audit reveals the same
issues in UCM module too.
It is better to disable this interface in the kernel,
before syzkaller team invests time and energy to harden
this unused interface.
[1] https://github.com/linux-rdma/rdma-core/pull/279
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc14eebfc2 upstream.
syzbot is reporting NULL pointer dereference at snapshot_write() [1].
This is because data->handle is zero-cleared by ioctl(SNAPSHOT_FREE).
Fix this by checking data_of(data->handle) != NULL before using it.
[1] https://syzkaller.appspot.com/bug?id=828a3c71bd344a6de8b6a31233d51a72099f27fd
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ae590932da6e45d6564d@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doron Roberts-Kedes