Here's the big char/misc driver updates for 3.15-rc1.
Lots of various things here, including the new mcb driver subsystem.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7ArIACgkQMUfUDdst+ylS+gCfcJr0Zo2v5aWnqD7rFtFETmFI
LhcAoNTQ4cvlVdxnI0driWCWFYxLj6at
=aj+L
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg KH:
"Here's the big char/misc driver updates for 3.15-rc1.
Lots of various things here, including the new mcb driver subsystem.
All of these have been in linux-next for a while"
* tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits)
extcon: Move OF helper function to extcon core and change function name
extcon: of: Remove unnecessary function call by using the name of device_node
extcon: gpio: Use SIMPLE_DEV_PM_OPS macro
extcon: palmas: Use SIMPLE_DEV_PM_OPS macro
mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro
mei: amthif: fix checkpatch error
mei: client.h fix checkpatch errors
mei: use cl_dbg where appropriate
mei: fix Unnecessary space after function pointer name
mei: report consistently copy_from/to_user failures
mei: drop pr_fmt macros
mei: make me hw headers private to me hw.
mei: fix memory leak of pending write cb objects
mei: me: do not reset when less than expected data is received
drivers: mcb: Fix build error discovered by 0-day bot
cs5535-mfgpt: Simplify dependencies
spmi: pm: drop bus-level PM suspend/resume routines
spmi: pmic_arb: make selectable on ARCH_QCOM
Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle
pch_phub: Report error writing MAC back to user
...
Add proper versioning to the shared obj so that distros would be
able to ship this lib without having to worry about versioning.
Suggested-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Commit 63f9a7fde7 "asmlinkage: Make lockdep_sys_exit asmlinkage" has added
asmlinkage annotation to lockdep_sys_exit, which broke build of liblockdep.
Since we don't need asmlinkage in liblockep, just ignore it.
Reported-by: Eunbong Song <eunb.song@samsung.com>
Reported-by: Robin Hack <rhack@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Pull perf changes from Ingo Molnar:
"Main changes:
Kernel side changes:
- Add SNB/IVB/HSW client uncore memory controller support (Stephane
Eranian)
- Fix various x86/P4 PMU driver bugs (Don Zickus)
Tooling, user visible changes:
- Add several futex 'perf bench' microbenchmarks (Davidlohr Bueso)
- Speed up thread map generation (Don Zickus)
- Introduce 'perf kvm --list-cmds' command line option for use by
scripts (Ramkumar Ramachandra)
- Print the evsel name in the annotate stdio output, prep to fix
support outputting annotation for multiple events, not just for the
first one (Arnaldo Carvalho de Melo)
- Allow setting preferred callchain method in .perfconfig (Jiri Olsa)
- Show in what binaries/modules 'perf probe's are set (Masami
Hiramatsu)
- Support distro-style debuginfo for uprobe in 'perf probe' (Masami
Hiramatsu)
Tooling, internal changes and fixes:
- Use tid in mmap/mmap2 events to find maps (Don Zickus)
- Record the reason for filtering an address_location (Namhyung Kim)
- Apply all filters to an addr_location (Namhyung Kim)
- Merge al->filtered with hist_entry->filtered in report/hists
(Namhyung Kim)
- Fix memory leak when synthesizing thread records (Namhyung Kim)
- Use ui__has_annotation() in 'report' (Namhyung Kim)
- hists browser refactorings to reuse code accross UIs (Namhyung Kim)
- Add support for the new DWARF unwinder library in elfutils (Jiri
Olsa)
- Fix build race in the generation of bison files (Jiri Olsa)
- Further streamline the feature detection display, trimming it a bit
to show just the libraries detected, using VF=1 gets a more verbose
output, showing the less interesting feature checks as well (Jiri
Olsa).
- Check compatible symtab type before loading dso (Namhyung Kim)
- Check return value of filename__read_debuglink() (Stephane Eranian)
- Move some hashing and fs related code from tools/perf/util/ to
tools/lib/ so that it can be used by more tools/ living utilities
(Borislav Petkov)
- Prepare DWARF unwinding code for using an elfutils alternative
unwinding library (Jiri Olsa)
- Fix DWARF unwind max_stack processing (Jiri Olsa)
- Add dwarf unwind 'perf test' entry (Jiri Olsa)
- 'perf probe' improvements including memory leak fixes, sharing the
intlist class with other tools, uprobes/kprobes code sharing and
use of ref_reloc_sym (Masami Hiramatsu)
- Shorten sample symbol resolving by adding cpumode to struct
addr_location (Arnaldo Carvalho de Melo)
- Fix synthesizing mmaps for threads (Don Zickus)
- Fix invalid output on event group stdio report (Namhyung Kim)
- Fixup header alignment in 'perf sched latency' output (Ramkumar
Ramachandra)
- Fix off-by-one error in 'perf timechart record' argv handling
(Ramkumar Ramachandra)
Tooling, cleanups:
- Remove unused thread__find_map function (Jiri Olsa)
- Remove unused simple_strtoul() function (Ramkumar Ramachandra)
Tooling, documentation updates:
- Update function names in debug messages (Ramkumar Ramachandra)
- Update some code references in design.txt (Ramkumar Ramachandra)
- Clarify load-latency information in the 'perf mem' docs (Andi
Kleen)
- Clarify x86 register naming in 'perf probe' docs (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (96 commits)
perf tools: Remove unused simple_strtoul() function
perf tools: Update some code references in design.txt
perf evsel: Update function names in debug messages
perf tools: Remove thread__find_map function
perf annotate: Print the evsel name in the stdio output
perf report: Use ui__has_annotation()
perf tools: Fix memory leak when synthesizing thread records
perf tools: Use tid in mmap/mmap2 events to find maps
perf report: Merge al->filtered with hist_entry->filtered
perf symbols: Apply all filters to an addr_location
perf symbols: Record the reason for filtering an address_location
perf sched: Fixup header alignment in 'latency' output
perf timechart: Fix off-by-one error in 'record' argv handling
perf machine: Factor machine__find_thread to take tid argument
perf tools: Speed up thread map generation
perf kvm: introduce --list-cmds for use by scripts
perf ui hists: Pass evsel to hpp->header/width functions explicitly
perf symbols: Introduce thread__find_cpumode_addr_location
perf session: Change header.misc dump from decimal to hex
perf ui/tui: Reuse generic __hpp__fmt() code
...
Pull RCU updates from Ingo Molnar:
"Main changes:
- Torture-test changes, including refactoring of rcutorture and
introduction of a vestigial locktorture.
- Real-time latency fixes.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcu: Provide grace-period piggybacking API
rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone
rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c
notifier: Substitute rcu_access_pointer() for rcu_dereference_raw()
Documentation/memory-barriers.txt: Clarify release/acquire ordering
rcutorture: Save kvm.sh output to log
rcutorture: Add a lock_busted to test the test
rcutorture: Place kvm-test-1-run.sh output into res directory
rcutorture: Rename TREE_RCU-Kconfig.txt
locktorture: Add kvm-recheck.sh plug-in for locktorture
rcutorture: Gracefully handle NULL cleanup hooks
locktorture: Add vestigial locktorture configuration
rcutorture: Introduce "rcu" directory level underneath configs
rcutorture: Rename kvm-test-1-rcu.sh
rcutorture: Remove RCU dependencies from ver_functions.sh API
rcutorture: Create CFcommon file for common Kconfig parameters
rcutorture: Create config files for scripted test-the-test testing
rcutorture: Add an rcu_busted to test the test
locktorture: Add a lock-torture kernel module
rcutorture: Abstract kvm-recheck.sh
...
Conflicts:
Documentation/devicetree/bindings/net/micrel-ks8851.txt
net/core/netpoll.c
The net/core/netpoll.c conflict is a bug fix in 'net' happening
to code which is completely removed in 'net-next'.
In micrel-ks8851.txt we simply have overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Moreover, the corresponding function in include/linux/kernel.h is marked
obsolete.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395176715-4465-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the names of some functions and enums in design.txt. The document
still has some stale information, but the motivation behind this patch
is to allow a developer to quickly grep and learn about the associated
structures.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395169804-1293-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event_open() was renamed to sys_perf_event_open(); update the debug
messages to reflect this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395169842-1399-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because it's not used any more.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395154016-26709-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that when showing multiple events annotations, we can figure out
which is which:
# perf record -a -e instructions,cycles sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.826 MB perf.data (~36078 samples) ]
# perf evlist
instructions
cycles
# perf annotate intel_idle 2> /dev/null | head -1
Percent | Source code & Disassembly of vmlinux for instructions
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-n1r51l329434js84qtb2c6l9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we introduced the ui__has_annotation() for that, don't open code
it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395124359-11744-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Checking default guest machine should be done before allocating event
structures otherwise it'll leak memory.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/87ob15tx6a.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can properly synthesize threads system-wide, make sure the
mmap and mmap2 events use tids instead of pids to locate their maps.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393429527-167840-3-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. don't drop al->filtered entries, create the hist_entries and use
its ->filtered bitmap, that is kept with the same semantics for its
bitmap, leaving the filtering to be done at the hist_entry level, i.e.
in the UIs.
This will allow zooming in/out the filters.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xeyhkepu7plw716lrtb0zlnu@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of bailing out as soon as we find a filter that applies, go on
checking all of them so that we can zoom in/out filters.
We also need to make sure we only update al->filtered after
thread__find_addr_map(), because there is where al->filtered gets
initialized to zero.
This will increase the cost of processing when all we don't need this
toggling, but will provide flexibility for the TUI and GTK+ interfaces,
that will incur in creating the hist_entries just once.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fhv9lhzdjxgp9w3w3668lsfw@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By turning the addr_location->filtered member from a boolean to a u8
bitmap, reusing (and extending) the hist_filter enum for that.
This patch doesn't change the logic at all, as it keeps the meaning of
al->filtered !0 to mean that the entry _was_ filtered, so no change in
how this value is interpreted needs to be done at this point.
This will be soon used in upcoming patches.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-89hmfgtr9t22sky1lyg7nw7l@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
---------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
---------------------------------------------------------------------------------------------------------------
... | | | | |
git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s
git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s
-----------------------------------------------------------------------------------------
TOTAL: | 396.542 ms | 353 |
---------------------------------------------------
After:
-----------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
-----------------------------------------------------------------------------------------------------------------
... | | | | |
git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s
git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 396.542 ms | 353 |
---------------------------------------------------
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395065901-25740-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 367b315 (perf timechart: Add support for -P and -T in timechart
recording, 2013-11-01), the 'perf timechart record' command stopped
working:
$ perf timechart record -- git status
Workload failed: No such file or directory
This happens because of an off-by-one error while preparing the argv for
cmd_record(): it attempts to execute the command 'status' and complains
that it doesn't exist. Fix this error.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Link: http://lkml.kernel.org/r/1394985965-2332-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
. Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run
all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo)
. Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9uCB
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull two 'perf bench' fixes from Arnaldo:
* Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run
all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo)
* Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Misc smaller fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix leak in uncore_type_init failure paths
perf machine: Use map as success in ip__resolve_ams
perf symbols: Fix crash in elf_section_by_name
perf trace: Decode architecture-specific signal numbers
Conflicts:
drivers/net/usb/r8152.c
drivers/net/xen-netback/netback.c
Both the r8152 and netback conflicts were simple overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Forcing the code to always search thread by pid/tid pair.
The PID value will be needed in future to determine the process thread
leader for map groups sharing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394805606-25883-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When trying to capture perf data on a system running spejbb2013, perf
hung for about 15 minutes. This is because it took that long to gather
about 10,000 thread maps and process them.
I don't think a user wants to wait that long.
Instead, recognize that thread maps are roughly equivalent to pid maps
and just quickly copy those instead.
To do this, I synthesize 'fork' events, this eventually calls
thread__fork() and copies the maps over.
The overhead goes from 15 minutes down to about a few seconds.
--
V2: based on Jiri's comments, moved malloc up a level
and made sure the memory was freed
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/1394808224-113774-1-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce
$ perf kvm --list-cmds
to dump a raw list of commands for use by the completion script. In
order to do this, introduce parse_options_subcommand() for handling
subcommands as a special case in the parse-options machinery.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1393896396-10427-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions need evsel to investigate event group and it's passed
via hpp->ptr. However as it can be missed easily so it's better to
pass it via an argument IMHO.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394437440-11609-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its one level up thread__find_addr_location, where it will look in
different domains for a sample: user, kernel, hypervisor, etc.
Will soon be used by a patchkit by Andi Kleen.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-so6nxkh7xj48bc5kq4jpj991@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When printing the raw dump of a data file, the header.misc is
printed as a decimal. Unfortunately, that field is a bit mask, so
it is hard to interpret as a decimal.
Print in hex, so the user can easily see what bits are set and more
importantly what type of info it is conveying.
V2: add 0x in front per Jiri Olsa
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393386227-149412-3-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __hpp__color_fmt used in the TUI code can be replace by the generic
code with small change in print_fn callback. And it also needs to move
callback function to the generic __hpp__fmt().
No functional changes intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of the pointer to buffer and its size so that it can also get
private argument passed along with hpp.
This is a preparation of further change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __hpp__color_fmt used in the gtk code can be replace by the generic
code with small change in print_fn callback.
This is a preparation to upcoming changes and no functional changes
intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The for_each_bench() macro must check that the "benchmarks" field of a
collection is not NULL before dereferencing it because the "all"
collection in particular has a NULL "benchmarks" field (signifying that
it has no benchmarks to iterate over).
This fixes this NULL pointer dereference when running "perf bench all":
[root@ssdandy ~]# perf bench all
<SNIP>
# Running mem/memset benchmark...
# Copying 1MB Bytes ...
2.453675 GB/Sec
12.056327 GB/Sec (with prefault)
Segmentation fault (core dumped)
[root@ssdandy ~]#
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394664051-6037-1-git-send-email-patrick@parcs.ath.cx
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if a process creates a bunch of threads using pthread_create
and then perf is run in system_wide mode, the mmaps for those threads
are not captured with a synthesized mmap event.
The reason is those threads are not visible when walking the /proc/
directory looking for /proc/<pid>/maps files. Instead they are
discovered using the /proc/<pid>/tasks file (which the synthesized comm
event uses).
This causes problems when a program is trying to map a data address to a
tid. Because the tid has no maps, the event is dropped. Changing the
program to look up using the pid instead of the tid, finds the correct
maps but creates ugly hacks in the program to carry the correct tid
around.
Fix this by moving the walking of the /proc/<pid>/tasks up a level (out
of the comm function) based on Arnaldo's suggestion.
Tweaked things a bit to special case the 'full' bit and 'guest' check.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393429527-167840-2-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clarify how to specify x86 registers in perf probe. I recently ran into
this problem and had to figure it out from the source.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1393596135-4227-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clarify in the documentation that 'perf mem report' reports use-latency,
not load/store-latency on Intel systems.
This often causes confusion with users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393596135-4227-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Block a bunch of threads on a futex and requeue them on another, N at a
time.
This program is particularly useful to measure the latency of nthread
requeues without waking up any tasks -- thus mimicking a regular
futex_wait.
An example run:
$ perf bench futex requeue -r 100 -t 64
Run summary [PID 151011]: Requeuing 64 threads (from 0x7d15c4 to 0x7d15c8), 1 at a time.
[Run 1]: Requeued 64 of 64 threads in 0.0400 ms
[Run 2]: Requeued 64 of 64 threads in 0.0390 ms
[Run 3]: Requeued 64 of 64 threads in 0.0400 ms
...
[Run 100]: Requeued 64 of 64 threads in 0.0390 ms
Requeued 64 of 64 threads in 0.0399 ms (+-0.37%)
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-4-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Block a bunch of threads on a futex and wake them up, N at a time.
This program is particularly useful to measure the latency of nthread
wakeups in non-error situations: all waiters are queued and all wake
calls wakeup one or more tasks.
An example run:
$ perf bench futex wake -t 512 -r 100
Run summary [PID 27823]: blocking on 512 threads (at futex 0x7e10d4), waking up 1 at a time.
[Run 1]: Wokeup 512 of 512 threads in 6.0080 ms
[Run 2]: Wokeup 512 of 512 threads in 5.2280 ms
[Run 3]: Wokeup 512 of 512 threads in 4.8300 ms
...
[Run 100]: Wokeup 512 of 512 threads in 5.0100 ms
Wokeup 512 of 512 threads in 5.0109 ms (+-2.25%)
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-3-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce futexes to perf-bench and add a program that stresses and
measures the kernel's implementation of the hash table.
This is a multi-threaded program that simply measures the amount of
failed futex wait calls - we only want to deal with the hashing
overhead, so a negative return of futex_wait_setup() is enough to do the
trick.
An example run:
$ perf bench futex hash -t 32
Run summary [PID 10989]: 32 threads, each operating on 1024 [private] futexes for 10 secs.
[thread 0] futexes: 0x19d9b10 ... 0x19dab0c [ 418713 ops/sec ]
[thread 1] futexes: 0x19daca0 ... 0x19dbc9c [ 469913 ops/sec ]
[thread 2] futexes: 0x19dbe30 ... 0x19dce2c [ 479744 ops/sec ]
...
[thread 31] futexes: 0x19fbb80 ... 0x19fcb7c [ 464179 ops/sec ]
Averaged 454310 operations/sec (+- 0.84%), total secs = 10
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-2-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we call just:
perf bench numa mem
it will present the same output as:
perf bench numa mem -h
i.e. ask for instructions about what to run.
While that is kinda ok, using 'run all tests' as the default, i.e.
making 'no parms' be equivalent to:
perf bench numa mem -a
Will allow:
perf bench numa all
to actually do what is asked: i.e. run all the 'bench' tests, instead of
responding to that by asking what to do.
That, in turn, allows:
perf bench all
to actually complete, for the same reasons.
And after that, the tests that come after that, and that at some point
hit a NULL deref, will run, allowing me to reproduce a recently reported
problem.
That when you have the needed numa libraries, which wasn't the case for
the reporter, making me a bit confused after trying to reproduce his
report.
So make no parms mean -a.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick Palka <patrick@parcs.ath.cx>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x7h0ghx4pef4n0brywg21krk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
"I know this is a bit more than you want to see, and I've told the
wireless folks under no uncertain terms that they must severely scale
back the extent of the fixes they are submitting this late in the
game.
Anyways:
1) vmxnet3's netpoll doesn't perform the equivalent of an ISR, which
is the correct implementation, like it should. Instead it does
something like a NAPI poll operation. This leads to crashes.
From Neil Horman and Arnd Bergmann.
2) Segmentation of SKBs requires proper socket orphaning of the
fragments, otherwise we might access stale state released by the
release callbacks.
This is a 5 patch fix, but the initial patches are giving
variables and such significantly clearer names such that the
actual fix itself at the end looks trivial.
From Michael S. Tsirkin.
3) TCP control block release can deadlock if invoked from a timer on
an already "owned" socket. Fix from Eric Dumazet.
4) In the bridge multicast code, we must validate that the
destination address of general queries is the link local all-nodes
multicast address. From Linus Lüssing.
5) The x86 BPF JIT support for negative offsets puts the parameter
for the helper function call in the wrong register. Fix from
Alexei Starovoitov.
6) The descriptor type used for RTL_GIGA_MAC_VER_17 chips in the
r8169 driver is incorrect. Fix from Hayes Wang.
7) The xen-netback driver tests skb_shinfo(skb)->gso_type bits to see
if a packet is a GSO frame, but that's not the correct test. It
should use skb_is_gso(skb) instead. Fix from Wei Liu.
8) Negative msg->msg_namelen values should generate an error, from
Matthew Leach.
9) at86rf230 can deadlock because it takes the same lock from it's
ISR and it's hard_start_xmit method, without disabling interrupts
in the latter. Fix from Alexander Aring.
10) The FEC driver's restart doesn't perform operations in the correct
order, so promiscuous settings can get lost. Fix from Stefan
Wahren.
11) Fix SKB leak in SCTP cookie handling, from Daniel Borkmann.
12) Reference count and memory leak fixes in TIPC from Ying Xue and
Erik Hugne.
13) Forced eviction in inet_frag_evictor() must strictly make sure all
frags are deleted, otherwise module unload (f.e. 6lowpan) can
crash. Fix from Florian Westphal.
14) Remove assumptions in AF_UNIX's use of csum_partial() (which it
uses as a hash function), which breaks on PowerPC. From Anton
Blanchard.
The main gist of the issue is that csum_partial() is defined only
as a value that, once folded (f.e. via csum_fold()) produces a
correct 16-bit checksum. It is legitimate, therefore, for
csum_partial() to produce two different 32-bit values over the
same data if their respective alignments are different.
15) Fix endiannes bug in MAC address handling of ibmveth driver, also
from Anton Blanchard.
16) Error checks for ipv6 exthdrs offload registration are reversed,
from Anton Nayshtut.
17) Externally triggered ipv6 addrconf routes should count against the
garbage collection threshold. Fix from Sabrina Dubroca.
18) The PCI shutdown handler added to the bnx2 driver can wedge the
chip if it was not brought up earlier already, which in particular
causes the firmware to shut down the PHY. Fix from Michael Chan.
19) Adjust the sanity WARN_ON_ONCE() in qdisc_list_add() because as
currently coded it can and does trigger in legitimate situations.
From Eric Dumazet.
20) BNA driver fails to build on ARM because of a too large udelay()
call, fix from Ben Hutchings.
21) Fair-Queue qdisc holds locks during GFP_KERNEL allocations, fix
from Eric Dumazet.
22) The vlan passthrough ops added in the previous release causes a
regression in source MAC address setting of outgoing headers in
some circumstances. Fix from Peter Boström"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits)
ipv6: Avoid unnecessary temporary addresses being generated
eth: fec: Fix lost promiscuous mode after reconnecting cable
bonding: set correct vlan id for alb xmit path
at86rf230: fix lockdep splats
net/mlx4_en: Deregister multicast vxlan steering rules when going down
vmxnet3: fix building without CONFIG_PCI_MSI
MAINTAINERS: add networking selftests to NETWORKING
net: socket: error on a negative msg_namelen
MAINTAINERS: Add tools/net to NETWORKING [GENERAL]
packet: doc: Spelling s/than/that/
net/mlx4_core: Load the IB driver when the device supports IBoE
net/mlx4_en: Handle vxlan steering rules for mac address changes
net/mlx4_core: Fix wrong dump of the vxlan offloads device capability
xen-netback: use skb_is_gso in xenvif_start_xmit
r8169: fix the incorrect tx descriptor version
tools/net/Makefile: Define PACKAGE to fix build problems
x86: bpf_jit: support negative offsets
bridge: multicast: enable snooping on general queries only
bridge: multicast: add sanity check for general query destination
tcp: tcp_release_cb() should release socket ownership
...
Fixes the following build failure:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -c -o virtio_test.o virtio_test.c
virtio_test.c: In function ‘run_test’:
virtio_test.c:176:7: error: expected ‘)’ before ‘r’
r = -1;
^
Fixes: 53c18c9906 (virtio_test: verify if virtqueue_kick() succeeded)
Cc: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In commit bb478d8b16 virtio_ring: plug kmemleak false positive,
kmemleak_ignore was introduced. This broke compilation of virtio_test:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -c -o virtio_ring.o ../../drivers/virtio/virtio_ring.c
../../drivers/virtio/virtio_ring.c: In function ‘vring_add_indirect’:
../../drivers/virtio/virtio_ring.c:177:2: warning: implicit declaration
of function ‘kmemleak_ignore’ [-Wimplicit-function-declaration]
kmemleak_ignore(desc);
^
cc virtio_test.o virtio_ring.o -o virtio_test
virtio_ring.o: In function `vring_add_indirect':
tools/virtio/../../drivers/virtio/virtio_ring.c:177:
undefined reference to `kmemleak_ignore'
Add a dummy header for tools/virtio, and add #incldue <linux/kmemleak.h>
to drivers/virtio/virtio_ring.c so it is picked up by the userspace
tools.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The virtio headers have changed recently:
5b1bf7cb67 virtio_ring: let virtqueue_{kick()/notify()} return a bool
46f9c2b925 virtio_ring: change host notification API
Update the internal copies to fix the build of virtio_test:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE
-c -o virtio_test.o virtio_test.c
In file included from virtio_test.c:15:0:
./linux/virtio.h:76:19: error: conflicting types for ‘vring_new_virtqueue’
struct virtqueue *vring_new_virtqueue(unsigned int index,
^
In file included from ./linux/virtio_ring.h:1:0,
from ../../usr/include/linux/vhost.h:17,
from virtio_test.c:14:
./linux/../../../include/linux/virtio_ring.h:68:19: note: previous
declaration of ‘vring_new_virtqueue’ was here
struct virtqueue *vring_new_virtqueue(unsigned int index,
virtio_test.c: In function ‘vq_info_add’:
virtio_test.c:103:12: warning: passing argument 7 of ‘vring_new_virtqueue’
from incompatible pointer type [enabled by default]
vq_notify, vq_callback, "test");
^
In file included from virtio_test.c:15:0:
./linux/virtio.h:76:19: note: expected ‘void (*)(struct virtqueue *)’ but
argument is of type ‘_Bool (*)(struct virtqueue *)’
struct virtqueue *vring_new_virtqueue(unsigned int index,
^
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes the following build problem with binutils-2.24
gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c
In file included from bpf_jit_disasm.c:25:0:
/usr/include/bfd.h:35:2: error: #error config.h must be included
before this header
#error config.h must be included before this header
This is similar to commit 3ce711a6ab
"perf tools: bfd.h/libbfd detection fails with recent binutils"
See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243
CC: David S. Miller <davem@davemloft.net>
CC: Daniel Borkmann <dborkman@redhat.com>
CC: netdev@vger.kernel.org
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User space callchains and user space stack dump were disabled
for function trace event. Mailing list discussions:
http://marc.info/?t=139302086500001&r=1&w=2http://marc.info/?t=139301437300003&r=1&w=2
Catching up with perf and disabling user space callchains and
DWARF unwind (uses user stack dump) for function trace event.
Adding following warnings when callchains are used
for function trace event:
# perf record -g -e ftrace:function ...
Disabling user space callchains for function trace event.
...
# ./perf record --call-graph=dwarf -e ftrace:function ...
Cannot use DWARF unwind for function trace event, falling back to framepointers.
Disabling user space callchains for function trace event.
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1393775800-13524-4-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
. Fix build of 'trace' in some systems due to using some architecture-specific
signal numbers (Ben Hutchings)
. Stop resolving when finding a map in in ip__resolve_ams, this way at least
the DSO will be resolved when a symbol isn't (Don Zickus)
. Fix crash in elf_section_by_name when not checking if some section string index
is valid (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oyOq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Fix build of 'trace' in some systems due to using some architecture-specific
signal numbers (Ben Hutchings)
* Stop resolving when finding a map in in ip__resolve_ams, this way at least
the DSO will be resolved when a symbol isn't (Don Zickus)
* Fix crash in elf_section_by_name when not checking if some section string index
is valid (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A failed msgget causes the test to return an uninitialised value in ret.
Assign ret to -errno on error exit.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When trying to map a bunch of instruction addresses to their respective
threads, I kept getting a lot of bogus entries [I forget the exact
reason as I patched my code months ago].
Looking through ip__resolve_ams, I noticed the check for
if (al.sym)
and realized, most times I have an al.map definition but sometimes an
al.sym is undefined. In the cases where al.sym is undefined, the loop
keeps going even though a valid al.map exists.
Modify this check to use the more reliable al.map. This fixed my bogus
entries.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393386227-149412-2-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing crash in elf_section_by_name function caused by missing section
name in elf binary.
Reported-by: Albert Strasheim <albert@cloudflare.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Albert Strasheim <albert@cloudflare.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393767127-599-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SIGSTKFLT is not defined on alpha, mips or sparc.
SIGEMT and SIGSWI are defined on some architectures and should be
decoded here if so.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 8bad5b0abf ('perf trace: Beautify signal number arg in several syscalls')
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648441.3003.101.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested by building perf:
- Cross-compiled for tile on x86_64
- Built natively on tile
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Turn Anton's memcpy / copy_tofrom_user test into something that can
live in tools/testing/selftests.
It requires one turd in arch/powerpc/lib/memcpy_64.S, but it's pretty
harmless IMHO.
We are sailing very close to the wind with the feature macros. We define
them to nothing, which currently means we get a few extra nops and
include the unaligned calls.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Use 8 columns for each number ouput.
We don't fit into 80 columns on most machines,
so keep the format simple.
Print frequency in MHz instead of GHz.
We've got 8 columns now, so use them to
show low frequency in a more natural unit.
Many users didn't understand what %c0 meant,
so re-name it to be %Busy.
Add Avg_MHz column, which is the frequency that many
users expect to see -- the total number of cycles executed
over the measurement interval.
People found the previous GHz to be confusing, since
it was the speed only over the non-idle interval.
That measurement has been re-named Bzy_MHz.
Suggested-by: Dirk J. Brandewie
Signed-off-by: Len Brown <len.brown@intel.com>
Conflicts:
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/mwifiex/pcie.c
net/ipv6/sit.c
The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.
The two wireless conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull liblockdep fixes from Ingo Molnar:
"A handful of build fixes for liblockdep"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Use realpath for srctree and objtree
tools/liblockdep: Add a stub for new rcu_is_watching
tools/liblockdep: Mark runtests.sh as executable
tools/liblockdep: Add include directory to allow tests to compile
tools/liblockdep: Fix include of asm/hash.h
tools/liblockdep: Fix initialization code path
When compiling perf tool code with gcc 4.4.7 I'm getting
following error:
CC util/session.o
cc1: warnings being treated as errors
util/session.c: In function ‘perf_session_deliver_event’:
tools/perf/util/include/linux/bitops.h:109: error: dereferencing pointer ‘p’ does break strict-aliasing rules
tools/perf/util/include/linux/bitops.h:101: error: dereferencing pointer ‘p’ does break strict-aliasing rules
util/session.c:697: note: initialized from here
tools/perf/util/include/linux/bitops.h:101: note: initialized from here
make[1]: *** [util/session.o] Error 1
make: *** [util/session.o] Error 2
The aliased types here are u64 and unsigned long pointers, which is safe
for the find_first_bit processing.
This error shows up for me only for gcc 4.4 on 32bit x86, even for
-Wstrict-aliasing=3, while newer gcc are quiet and scream here for
-Wstrict-aliasing={2,1}. Looks like newer gcc changed the rules for
strict alias warnings.
The gcc documentation offers workaround for valid aliasing by using
__may_alias__ attribute:
http://gcc.gnu.org/onlinedocs/gcc-4.4.0/gcc/Type-Attributes.html
Using this workaround for the find_first_bit function.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393434867-20271-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU updates from Paul E. McKenney:
* Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2014/2/17/555.
* Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2014/2/17/530. Note that two of these
are RCU changes to other maintainer's trees: add1f09954
(fs) and 8857563b81 (notifer), both of which substitute
rcu_access_pointer() for rcu_dereference_raw().
* Real-time latency fixes. These were posted to LKML at
https://lkml.org/lkml/2014/2/17/544.
* Torture-test changes, including refactoring of rcutorture
and introduction of a vestigial locktorture. These were posted
to LKML at https://lkml.org/lkml/2014/2/17/599.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If BUILD_SRC or CURDIR contains tailing '/', the file names passed to gcc will
contain '//'. It will be contained .o's in debuginfo, then confuse debugedit:
https://bugzilla.redhat.com/show_bug.cgi?id=304121
This patch uses realpath command to makesure potential tailing '/'s are removed.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Geng Hui <hui.geng@huawei.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
All of the programs in the tests directory require the
liblockdep/mutex.h header in order to compile. Add the include directory
to the compiler options so that the tests can be built with the provided
Makefile.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Commit 71ae8aac ("lib: introduce arch optimized hash library")
added an include to <linux/hash.h> for setting up an architecture
specific fast hash.
This patch mirrors the fix used for perf, titled "tools: perf: util: fix
include for non x86 architectures".
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
This makes initialization actually happen. Without it, initialization is
always skipped due to an incorrect conditional statement.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
As mentioned at commit 5a5d8e4844, we can't terminate 'virsh console'
with the default signal(INT). So it's better to set CLOSE_CONSOLE_SIGNAL
in the kvm.conf.
Link: http://lkml.kernel.org/r/8738jatylb.wl%satoru.takeuchi@gmail.com
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
[ Typo fixed by ]
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Lets clean up bpf_dbg a bit and improve its code slightly
in various areas: i) Get rid of some macros as there's no
good reason for keeping them, ii) remove one unused variable
and reduce scope of various variables found by cppcheck,
iii) Close non-default file descriptors when exiting the shell.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When loading a dso it'll look for symbol tables of all possible types.
However it's just wasted of time to check incompatible types - like
trying kernel module when loading user library.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1392859976-32760-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dso__read_binary_type_filename() called, it doesn't check the
return value of filename__read_debuglink() so that it'll try to open the
debuglink file even if it doesn't exist.
Also fix return value of the filename__read_debuglink() as it always
return -1 regardless of the result.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane reported that perf report and annotate failed to process data
using lots of (> 500) shared libraries. It was because of the limit on
number of open files (ulimit -n).
Currently when perf loads a DSO, it'll look for normal and dynamic
symbol tables. And if it fails to find out both tables, it'll iterate
all of possible symtab types. But many of them are useless since they
have no additional information and the problem is that it's not closing
those files even though they're not used. Fix it.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The TUI of perf report and top support annotation, but stdio and GTK
don't. So it should be checked before calling hist_entry__inc_addr_
samples() to avoid wasting resources that will never be used.
perf annotate need it regardless of UI and sort keys, so the check
of whether to allocate resources should be on the tools that have
annotate as an option in the TUI, 'report' and 'top', not on the
function called by all of them.
It caused perf annotate on ppc64 to produce zero output, since the
buckets were not being allocated.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-1-git-send-email-namhyung@kernel.org
[ Renamed (report,top)__needs_annotate() to ui__has_annotation() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding make test for NO_LIBDW_DWARF_UNWIND option, plus updating minimal
build test with it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects
default DWARf post unwinder based on detected features (libdw and
libunwind support)
If both are detected the libunwind is selected as default. Simple
'make' will try to add:
- libunwind unwinder if present
- libdw unwinder if present
- disable dwarf unwind if non of libunwind and libdw
libraries are present
If one of the DWARF unwind libraries is detected, message is displayed
which one (libunwind/libdw) is compiled in.
Examples:
- compile in libdw unwinder if present:
$ make NO_LIBUNWIND=1
- compile in libdw (with libdw installation directory) unwinder if present:
$ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... DWARF post unwind library: libdw
- disable post dwarf unwind completely:
$ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... DWARF post unwind library: libunwind
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com
[ Add suggestion about setting LIBDW_DIR when not finding libdw ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding libdw DWARF post unwind support, which is part of
elfutils-devel/libdw-dev package from version 0.158.
The new code is contained in unwin-libdw.c object, and implements
unwind__get_entries unwind interface function.
New Makefile variable NO_LIBDW_DWARF_UNWIND was added to control its
compilation, and is marked as disabled now. It's factored with the rest
of the Makefile unwind build code in the next patch.
Arch specific code was added for x86.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When one has libunwind installed somewhere the perf tools build process
doesn't expects it to be, this happens:
[acme@ssdandy linux]$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
config/Makefile:312: No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1
Auto-detecting system features:
<SNIP>
... libunwind: [ OFF ]
Change the message so that it tells how to use a non-standard libunwind
install directory:
config/Makefile:312: No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
[acme@ssdandy linux]$ make LIBUNWIND_DIR=/opt/libunwind-git/ O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
<SNIP>
... libunwind: [ on ]
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-huoxnou7sw85lm58k3pi1xhw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dump of interesting build directories to the make VF=1 output.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... backtrace: [ on ]
... fortify-source: [ on ]
... gtk2-infobar: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... libpython-version: [ on ]
... on-exit: [ on ]
... stackprotector-all: [ on ]
... timerfd: [ on ]
... libunwind-debug-frame: [ OFF ]
... bionic: [ OFF ]
... prefix: /home/jolsa
... bindir: /home/jolsa/bin
... libdir: /home/jolsa/lib64
... sysconfdir: /home/jolsa/etc
Adding functions to print variable/text in features display -
feature_print_var/feature_print_text (feature_print_text is used in next
patches).
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the we display all detected features/libraries by following
rules:
- if one of the features is missing
- if it's build from clean tree
This patch changes changes this behavior in several ways.
- We no longer display all detected features, only detected libraries
are displayed by default:
$ make
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
The assumption is, that above libraries are the most interesting part
of the detection, while we don't care much about detection of on-exit
support.
- If all above libraries are detected, the default is not shown on
subsequent builds.
- If one of the above libraries is missing, the detection output is
forced.
- The features status is stored in PERF-FEATURES file and the detection
output is forced in case the there's difference between the file
contents and currently detected features.
- If you want to see all detected features, you can use VF=1 make
variable, that forces the detected features output.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... backtrace: [ on ]
... fortify-source: [ on ]
... gtk2-infobar: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... libpython-version: [ on ]
... on-exit: [ on ]
... stackprotector-all: [ on ]
... timerfd: [ on ]
... libunwind-debug-frame: [ OFF ]
... bionic: [ OFF ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bison and flex C objects don't have dependency for creating output
directories.
This could lead to build failure if the one of those objects is picked
up by make to be build as the first one (reported by Arnaldo).
Also following make fails:
$ rm -rf /tmp/krava; mkdir /tmp/krava; make O=/tmp/krava util/pmu-bison.o
BUILD: Doing 'make -j4' parallel build
[ SNIP ]
BISON /tmp/krava/util/pmu-bison.c
FLAGS: * new build flags or prefix
bison: /tmp/krava/util/pmu-bison.output: cannot open: No such file or directory
make[1]: *** [/tmp/krava/util/pmu-bison.c] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [util/pmu-bison.o] Error 2
Adding bison objects dependency for output directories (flex objects
depends on bisons').
This fixies the make_util_pmu_bison_o_O make test.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392805300-14610-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding pmu-bison.o make test:
$ make -f tests/make make_util_pmu_bison_o
- make_util_pmu_bison_o: cd . && make -f Makefile DESTDIR=/tmp/tmp.0u99hQn8Ga util/pmu-bison.o
$ make -f tests/make make_util_pmu_bison_o_O
- make_util_pmu_bison_o_O: cd . && make -f Makefile O=/tmp/tmp.sWKDLGS71O DESTDIR=/tmp/tmp.htQNJAfJ0d util/pmu-bison.o
make: *** [make_util_pmu_bison_o_O] Error 1
The 'O=' version of the test is failing at the moment, due to the OUTPUT
directory issue fixed in next patch.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392805300-14610-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable and fix *.o object make tests. Following tests are now available:
$ make -f tests/make make_perf_o_O
- make_perf_o_O: cd . && make -f Makefile O=/tmp/tmp.iF5vI5emGy DESTDIR=/tmp/tmp.epDPFVhH0s perf.o
$ make -f tests/make make_util_map_o_O
- make_util_map_o_O: cd . && make -f Makefile O=/tmp/tmp.BWuMf55ygC DESTDIR=/tmp/tmp.QbGBRF95oP util/map.o
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392805300-14610-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit logs the progress text that kvm.sh outputs, improving
after-the-fact troubleshooting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The output of each kvm-test-1-run.sh script is placed into a file
whose name parallels that of the build directory. This means that
the kvm-test-1-run.sh output is overwritten by later run. This
commit therefore places the kvm-test-1-run.sh output into the
per-test-case directory in the "res" hierarchy.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
It used to be that:
git ls-files "*Kconfig*"
would find all Kconfig files and would only find Kconfig files. This
commit renames TREE_RCU-Kconfig.txt to TREE_RCU-kconfig.txt so that this
is once again true.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds the kvm-recheck-lock.sh plug-in for locktorture to
print out lock-specific progress statistics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds a trivial set of configuration files for lock
torturing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit uses the standard software ploy of introducing another
level of indirection below the configs directory. This allows each
torture-test suite to have its own set of Kconfig files, boot parameters,
and version-specific scripts. Initially, we have only rcu, but lock
will follow soonish.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The kvm-test-1-rcu.sh is not specific to RCU, so this commit renames it
to kvm-test-1-run.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current set of functions in ver_functions.sh have APIs that are
specific to RCU. This commit therefore makes an RCU-independent function
that outputs version-specific boot arguments. This has the benefit that
a test-type-independent call in kvm-test-1-rcu.sh can now handle any type
of test, given a test-type-specific set of files in a configs directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, CONFIG_RCU_TORTURE_TEST=y is hardcoded into the
kvm-test-1-rcu.sh script and CONFIG_PRINTK_TIME=y is mentioned in each
and every configs file. This commit creates a CFcommon file for these
two Kconfig parameters, and modifies kvm-test-1-rcu.sh to copy this new
file into the .config file during the build. This change will allow
these scripts to operate on torture types other than just rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds a pair of files in the configs directory to allow
test-the-test runs of rcutorture via a "--configs BUSTED" argument to
the kvm.sh script.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit creates a plug-in to allow kvm-recheck.sh to process
non-rcutorture console output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit prevents the results directory from being created for
dryruns. However, a script generated from a dryrun will create
the results directory should it be run.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org
