Steinar Bakkemo
|
cfd7a7301a
|
Modified kernel config to use bcmdhd driver instead of brcmfmac driver
Update devicetree to reference bcmdhd and not brcmfmac driver (oob irq)
|
2019-01-19 13:21:55 +01:00 |
Steinar Bakkemo
|
cc50b7e3e9
|
Limit WIFI SDIO speed to 50 MHz
|
2019-01-19 13:21:44 +01:00 |
Martin T. H. Sandsmark
|
b941c46019
|
device tree: take down debounce interval even more
|
2017-08-31 10:40:05 +02:00 |
Martin T. H. Sandsmark
|
f41eabe36d
|
dts: bring down the debounce interval for the right and left keys, so people can switch pages
|
2017-08-17 20:12:14 +02:00 |
Martin T. H. Sandsmark
|
9ab9c1ef4a
|
Revert "mxc_epdc_fb: add 5bit waveform support"
It is absurdly slow and laggy
This reverts commit 1817e72e30 .
|
2017-08-10 11:26:37 +02:00 |
Martin T. H. Sandsmark
|
1817e72e30
|
mxc_epdc_fb: add 5bit waveform support
|
2017-08-07 13:49:45 +02:00 |
Martin T. H. Sandsmark
|
c6a24fdc31
|
dts: use low power gpio from fuel gauge to wake device so it can shut down properly
|
2017-07-09 12:56:50 +02:00 |
Martin T. H. Sandsmark
|
f551869e13
|
dts: tighten up power up speed even more
|
2017-07-08 21:18:41 +02:00 |
Martin T. H. Sandsmark
|
5b5adbbff3
|
dts: fix power sequencing for EP2
|
2017-07-08 19:34:30 +02:00 |
Martin T. H. Sandsmark
|
db97b1f325
|
dts: add thermistor regulator to our dts
|
2017-05-18 10:05:44 +02:00 |
Martin T. H. Sandsmark
|
380f25e455
|
disable busfreq completely
|
2017-05-11 12:53:21 +02:00 |
Martin T. H. Sandsmark
|
1b1c4968ec
|
dts: enable emmc 100mhz/200mhz
|
2017-01-18 18:47:55 +01:00 |
Martin T. H. Sandsmark
|
dce87a5c50
|
dts: adjust max17135 power sequencing
|
2017-01-18 18:47:33 +01:00 |
Martin T. H. Sandsmark
|
3d2c8acdc4
|
dts: add regulator num
|
2017-01-18 18:47:19 +01:00 |
Martin T. H. Sandsmark
|
cfe7f0859d
|
dts: enable vbus control gpio
|
2017-01-18 18:47:05 +01:00 |
Martin T. H. Sandsmark
|
3b52dc300f
|
dts: fix gpio keys pad control
|
2017-01-13 19:16:37 +01:00 |
Martin T. H. Sandsmark
|
520bfaaeaa
|
dts: fix disable charger gpio pad control
|
2017-01-13 19:10:19 +01:00 |
Martin T. H. Sandsmark
|
c4d82b07fb
|
dts: enable keys as wakeup sources
|
2017-01-13 19:09:51 +01:00 |
Martin T. H. Sandsmark
|
45ff55815a
|
switch to gpio keys, fix active low
|
2016-12-21 18:33:39 +01:00 |
Martin T. H. Sandsmark
|
9bf4b0c9c1
|
wifi: use mmc power sequencing instead of manual gpio twiddling
|
2016-12-21 18:30:53 +01:00 |
Martin T. H. Sandsmark
|
71807f0882
|
fix bringing up wifi after standby
|
2016-12-21 18:24:39 +01:00 |
Martin T. H. Sandsmark
|
2f975737a1
|
dts: remove unused fec pins
|
2016-12-05 11:08:46 +01:00 |
Martin T. H. Sandsmark
|
84eb70a235
|
dts: fix left key gpio
|
2016-12-05 11:08:32 +01:00 |
Martin T. H. Sandsmark
|
80677a90cf
|
mach: enable external wifi power before enabling internal regulator
|
2016-12-05 11:07:07 +01:00 |
Martin T. H. Sandsmark
|
96e3808602
|
dts: Use define for default/no pad control for readability
|
2016-12-02 10:34:16 +01:00 |
Martin T. H. Sandsmark
|
bd4438a144
|
dts: remove touchscreen buttons and proximity sensor
|
2016-12-01 12:00:20 +01:00 |
Martin T. H. Sandsmark
|
c511b1904f
|
dts: Fix wifi
|
2016-11-29 17:14:17 +01:00 |
Martin T. H. Sandsmark
|
24b36c3d41
|
dts: disable wifi reset pins for now, until we fix the driver
|
2016-11-29 13:00:07 +01:00 |
Martin T. H. Sandsmark
|
f42da238ef
|
dts: remove unused pad
|
2016-11-29 12:59:36 +01:00 |
Martin T. H. Sandsmark
|
3940f4f9c1
|
dts: fix charging detection
|
2016-11-29 12:59:28 +01:00 |
Martin T. H. Sandsmark
|
f7ae3f89dc
|
dts: add GPIO control for charging status and control
disabled until it works
|
2016-11-29 12:53:49 +01:00 |
Martin T. H. Sandsmark
|
064158b203
|
dts: add gpio keys, disabled until we receive the new PCBAs
|
2016-11-29 12:44:32 +01:00 |
Martin T. H. Sandsmark
|
ad932ed15f
|
dts: disable removed usb2 and sd-card reader
|
2016-11-29 12:36:21 +01:00 |
Martin T. H. Sandsmark
|
7bcefd22ea
|
Revert "cyttsp5: use gpio-reset driver for resetting"
This reverts commit 47c67e91d5 .
|
2016-10-26 12:44:20 +02:00 |
Martin T. H. Sandsmark
|
6feeea8092
|
max17135: specify chip version in devicetree
|
2016-10-22 17:26:46 +02:00 |
Martin T. H. Sandsmark
|
47c67e91d5
|
cyttsp5: use gpio-reset driver for resetting
|
2016-10-22 16:47:01 +02:00 |
Martin T. H. Sandsmark
|
51e3c73dfc
|
dts: add reset controller for wifi for powering it up
|
2016-10-22 16:17:31 +02:00 |
Martin T. H. Sandsmark
|
068093e868
|
enable brcmfmac
|
2016-10-14 12:48:31 +02:00 |
Martin T. H. Sandsmark
|
fda1b301b5
|
dts: update pins for wifi according to suggestion from Kaifa
|
2016-10-14 12:47:35 +02:00 |
Martin T. H. Sandsmark
|
e9bd4a96ab
|
dts: remove ethernet/FEC
|
2016-09-26 12:57:00 +02:00 |
Martin T. H. Sandsmark
|
a999603253
|
dts: remove ssi2
|
2016-09-26 12:56:29 +02:00 |
Martin T. H. Sandsmark
|
e2972eb4d1
|
Fix OTG VBUS pin
|
2016-09-20 17:03:21 +02:00 |
Martin T. H. Sandsmark
|
fe2065ef53
|
Re-enable USB PWR pin
|
2016-09-16 22:57:29 +02:00 |
Martin T. H. Sandsmark
|
eda834802e
|
Re-enable touch panel in DTS
|
2016-09-16 22:57:12 +02:00 |
Martin T. H. Sandsmark
|
e96a68436f
|
Update timing information for the MAX17135
|
2016-09-12 09:33:44 +02:00 |
Martin T. H. Sandsmark
|
3dbb49bcca
|
Update power sequencing for EPD
|
2016-09-01 17:35:48 +02:00 |
Martin T. H. Sandsmark
|
a8179ee397
|
Fix max voltage for USDHC3 in DTS
|
2016-08-24 15:17:41 +02:00 |
Martin T. H. Sandsmark
|
0f19a92738
|
Add touchscreen to device tree
|
2016-08-23 12:19:55 +02:00 |
Martin T. H. Sandsmark
|
93a79f3d18
|
Set KPP pins as keypad pins in iomux
|
2016-08-23 12:19:54 +02:00 |
Martin T. H. Sandsmark
|
8071984a98
|
Use the correct pins for I2C bus number 3
|
2016-08-23 12:19:53 +02:00 |