As can be seen from the datasheet of the CoreSight
Components, DDI0401C A.1.1 the ETM has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks.
The ATCLK is enabled and disabled using the runtime PM
callbacks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
clk_disable_unprepare() was not called. Now the runtime PM
callbacks will make sure the PCLK is properly disabled
after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Ux500 has a PrimeCell version 4B instead of the 3B as
supported by the driver, extend the match table to cover
this version.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helpfully report a bit more about the hardware found in the
silicon when matching the AMBA device IDs by using the associated
.data pointer in the AMBA match.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using function "module_amba_driver()" makes the code simpler by
eliminating boilerplate code.
Wei Yongjun sent out a set of patches addressing those in all the
coresight driver but missed ETMv3.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETM ID registers contain valuable information about the capabilities
of the implementation and are very useful when configuring the device for
various trace scenarios.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having access to the ETMv4 management registers is very useful as they
give meaningful information on how the IP block has been configured at
synthesis time.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to control the selection of the resources the
trace unit will use as triggers to perform a trace run.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries related to the counter functionality, more
specifically to set, control and reload the counters.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to access the sequencers related registers,
more specifically the sequencer state, the sequencer state
transition and the sequencer reset control registers.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to control the various mode the address comparator
registers can enact, i.e, start/top, single, and range. Also supplementing
with address comparator types configuration registers access, mandatory
to complete the configuration of the comparator functions.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to configure:
. global timestamp.
. how often trace synchronisation occur.
. the threashold value for cycle counting.
. branch and broadcasting regions.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to:
. set the tracing entity with default values.
. set various mode associated to the tracing entity.
. select the processing entity the tracing entity relates to.
. select various events of interest.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tracers can be configured with various options at synthesis
time and knowing what resources are available is important for
SW configuration purposes.
As such adding RO sysfs entries for characteristics related to the
tracer implementation.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We attempt to sanity check the buffer depth reported by the hardware by
making sure it is not less than zero however this check will never be true
since the buffer depth is stored in an unsigned integer. Instead change
the check to look for the top bit being set which was the intention.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we initialise the ETB driver we attempt to allocate a buffer suitable
for storing the data buffered in the hardware based on sizing information
reported by the hardware. Unfortunately if the hardware is not properly
configured (for example if power domains are not set up correctly) then we
may read back a nonsensically large value and therefore the allocation will
be too big to succeed. Print an error message showing the amount of memory
we tried to allocate if the buffer allocation fails to help users diagnose
such problems.
Normally it is bad practice to print an error message on memory allocation
failures since there are verbose core messages reported for this but in
this case where the allocation size might be incorrect it is a useful hint.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.
Commit 195daf665a ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d2932 ("watchdog: Add watchdog enable/disable all functions").
There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.
This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* readtest: the signal-handling code was clobbering the error codes we should
be handling/reporting in this test, rendering it useless. Noticed by Coverity.
* the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised,
so let's change that before 4.1 is minted.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=13mb
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two MTD fixes for 4.1:
- readtest: the signal-handling code was clobbering the error codes
we should be handling/reporting in this test, rendering it useless.
Noticed by Coverity.
- the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
revised, so let's change that before 4.1 is minted"
* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
mtd: readtest: don't clobber error reports
Here are some USB fixes and new device ids for 4.1-rc4. All are pretty
minor, and have been in linux-next successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4DEACgkQMUfUDdst+ynfngCfcs8LxLL4au1ig7X7b5zN9qzw
SYwAnj5IoQEDMVfpvoq1Pb2+g3KMCodl
=GMQH
-----END PGP SIGNATURE-----
Merge tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes and new device ids for 4.1-rc4.
All are pretty minor, and have been in linux-next successfully"
* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
Added another USB product ID for ELAN touchscreen quirks.
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
usb: chipidea: debug: avoid out of bound read
USB: visor: Match I330 phone more precisely
USB: pl2303: Remove support for Samsung I330
USB: cp210x: add ID for KCF Technologies PRN device
usb: gadget: remove incorrect __init/__exit annotations
usb: phy: isp1301: work around tps65010 dependency
usb: gadget: serial: fix re-ordering of tx data
usb: gadget: hid: Fix static variable usage
usb: gadget: configfs: Fix interfaces array NULL-termination
usb: gadget: xilinx: fix devm_ioremap_resource() check
usb: dwc3: dwc3-omap: correct the register macros
Here's some TTY and serial driver fixes for reported issues. All of
these have been in linux-next successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4JMACgkQMUfUDdst+ymy/QCfSx/npI/WfRNlKBMHI20xwOaE
szQAoJKRxeF0d+2GCJ56OVbmqqjnG4IN
=FUtJ
-----END PGP SIGNATURE-----
Merge tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here's some TTY and serial driver fixes for reported issues.
All of these have been in linux-next successfully"
* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pty: Fix input race when closing
tty/n_gsm.c: fix a memory leak when gsmtty is removed
Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
serial: omap: Fix error handling in probe
earlycon: Revert log warnings
Here's some staging and iio driver fixes to resolve a number of reported
issues. All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4PsACgkQMUfUDdst+ynGagCg0TP6R6jchyJqe5Cw45PovkQ1
r+gAnRMF+wc7Q2vGJYV7tSLQxpcxBRVk
=NPXR
-----END PGP SIGNATURE-----
Merge tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver fixes from Greg KH:
"Here's some staging and iio driver fixes to resolve a number of
reported issues.
All of these have been in linux-next for a while"
* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
iio: light: hid-sensor-prox: Fix memory leak in probe()
iio: adc: cc10001: Add delay before setting START bit
iio: adc: cc10001: Fix regulator_get_voltage() return value check
iio: adc: cc10001: Fix incorrect use of power-up/power-down register
staging: gdm724x: Correction of variable usage after applying ALIGN()
iio: adc: cc10001: Fix the channel number mapping
staging: vt6655: lock MACvWriteBSSIDAddress.
staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
staging: vt6655: Fix 80211 control and management status reporting.
staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
staging: vt6656: use ieee80211_tx_info to select packet type.
staging: rtl8712: freeing an ERR_PTR
staging: sm750: remove incorrect __exit annotation
iio: kfifo: Set update_needed to false only if a buffer was allocated
iio: mcp320x: Fix occasional incorrect readings
iio: accel: mma9553: check input value for activity period
iio: accel: mma9553: add enable channel for activity
iio: accel: mma9551_core: prevent buffer overrun
...
Here is one fix, in the extcon subsystem, that resolves a reported
issue. It's been in linux-next for a number of weeks now, sorry for not
getting it to you sooner.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4VEACgkQMUfUDdst+yk3sQCgtlRpHuuO0p7VAKHakWixhK7i
7D0An16DODuDxlf00fIZDkGr8lcZ+pXb
=GiRC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one fix, in the extcon subsystem, that resolves a reported
issue.
It's been in linux-next for a number of weeks now, sorry for not
getting it to you sooner"
* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
extcon: usb-gpio: register extcon device before IRQ registration
Pull UML hostfs fix from Richard Weinberger:
"This contains a single fix for a regression introduced in 4.1-rc1"
* 'for-linus-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
hostfs: Use correct mask for file mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=zGn5
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs
Pull UBI bufix from Richard Weinberger:
"This contains a single bug fix for the UBI block driver"
* tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs:
UBI: block: Add missing cache flushes
lazytime mount optimization code where we could end up updating the
timestamps to the wrong inode.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVV1l1AAoJEPL5WVaVDYGjdPwH/RzNut4bfgq7yK2yUVNqPpPN
QzjR848fT1lj7C1eN7eEh+NRG+KNM2QnmMJBU8jVnwq2l3r8AGFV/bDRC+Zx4U8L
cz9mZJMU7ZDP5TH/WVyimySGAXpaFKruXA+3L8CyC3LQEI6TUOxKt5CqNi0/9nND
B8HoF+Ei7jIILrcW7KKj55/fSfh4iiy+iUb0kjrSnZj0y5sROfFG2QhQwIhJRk7I
/8aeg2HYbhWXCKQHnQ5F4lLNCf44kdJ/EoCpz6aOHtVwrnBcQ44yeqm5MtHSh6Qw
lj8iPCIlcHYGZE4im+pWAavDMeHBm/VnOnH9545t6nNFq6W7WNdkD99ZJ/AQyWQ=
=JJxO
-----END PGP SIGNATURE-----
Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs; the most serious of which is a bug in the
lazytime mount optimization code where we could end up updating the
timestamps to the wrong inode"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix an ext3 collapse range regression in xfstests
jbd2: fix r_count overflows leading to buffer overflow in journal recovery
ext4: check for zero length extent explicitly
ext4: fix NULL pointer dereference when journal restart fails
ext4: remove unused function prototype from ext4.h
ext4: don't save the error information if the block device is read-only
ext4: fix lazytime optimization
Pull btrfs fixes from Chris Mason:
"The first commit is a fix from Filipe for a very old extent buffer
reuse race that triggered a BUG_ON. It hasn't come up often, I looked
through old logs at FB and we hit it a handful of times over the last
year.
The rest are other corners he hit during testing"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
Btrfs: fix race between block group creation and their cache writeout
Btrfs: fix panic when starting bg cache writeout after IO error
Btrfs: fix crash after inode cache writeback failure
Pull MIPS fixes from Ralf Baechle:
"Seven small fixes. The shortlog below is a good description so no
need to elaborate.
It has sat in linux-next and survived the usual automated testing by
Imagination's test farm"
* 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: tlb-r4k: Fix PG_ELPA comment
MIPS: Fix up obsolete cpu_set usage
MIPS: IP32: Fix build errors in reset code in DS1685 platform hook.
MIPS: KVM: Fix unused variable build warning
MIPS: traps: remove extra Tainted: line from __show_regs() output
MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1
MIPS: Fix a preemption issue with thread's FPU defaults
Nothing frightening this time, just smaller fixes in a number of places.
The other changes contained here are:
MAINTAINERS file updates:
- The mach-gemini maintainer is back in action and has a new git tree
- Krzysztof Kozlowski has volunteered to be a new co-maintainer
for the samsung platforms
- updates to the files that belong to Marvell mvebu
Bug fixes:
- The largest changes are on omap2, but are only to avoid some
harmless warnings and to fix reset on omap4
- a small regression fix on tegra
- multiple fixes for incorrect IRQ affinity on vexpress
- the missing system controller on arm64 juno is added
- one revert of a patch that was accidentally applied
twice for mach-rockchip
- two clock related DT fixes for mvebu
- a workaround for suspend with old DT binaries on new
exynos kernels
- Another fix for suspend on exynos, needs to be backported.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vdyw
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Nothing frightening this time, just smaller fixes in a number of
places.
The other changes contained here are:
MAINTAINERS file updates:
- The mach-gemini maintainer is back in action and has a new git tree
- Krzysztof Kozlowski has volunteered to be a new co-maintainer for
the samsung platforms
- updates to the files that belong to Marvell mvebu
Bug fixes:
- The largest changes are on omap2, but are only to avoid some
harmless warnings and to fix reset on omap4
- a small regression fix on tegra
- multiple fixes for incorrect IRQ affinity on vexpress
- the missing system controller on arm64 juno is added
- one revert of a patch that was accidentally applied twice for
mach-rockchip
- two clock related DT fixes for mvebu
- a workaround for suspend with old DT binaries on new exynos kernels
- Another fix for suspend on exynos, needs to be backported"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
MAINTAINERS: Add dts entries for some of the Marvell SoCs
MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer
ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
ARM: EXYNOS: Fix failed second suspend on Exynos4
Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
ARM: EXYNOS: Don't try to initialize suspend on old DT
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
ARM: gemini: fix compiler warning due wrong data type
ARM: vexpress/tc2: Add interrupt-affinity to the PMU node
ARM: vexpress/ca9: Add interrupt-affinity to the PMU node
ARM: vexpress/ca9: Add unified-cache property to l2 cache node
ARM64: juno: add sp810 support and fix sp804 clock frequency
ARM: Gemini: Maintainers update
ARM: OMAP2+: Remove bogus struct clk comparison for timer clock
ARM: dove: Add clock-names to CuBox Si5351 clk generator
ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality
ARM: OMAP4+: PRM: add support for passing status register/bit info to reset
ARM: AM43xx: hwmod: add VPFE hwmod entries
ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
...
Pull thermal fixes from Zhang Rui:
"Specifics:
- fix an issue in intel_powerclamp driver that idle injection target
is not accurately maintained on newer Intel CPUs. Package C8 to
C10 states are introduced on these CPUs but they were not included
in the package c-state residency calculation. From Jacob Pan.
- fix a problem that package c-state idle injection was missing on
Broadwell server, by adding its id to intel_powerclamp driver.
From Jacob Pan.
- a couple of small fixes and cleanups from Joe Perches, Mathias
Krause, Dan Carpenter and Anand Moon"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: tmon: fixed the 'make install' command
thermal: rockchip: fix an error code
thermal/powerclamp: fix missing newer package c-states
thermal/intel_powerclamp: add id for broadwell server
thermal/intel_powerclamp: add __init / __exit annotations
thermal: Use bool function return values of true/false not 1/0
Urgent fix for Kselftest regression introduced in 4.1-rc1
by the new x86 test due to its hard dependency on 32-bit
build environment. A set of 5 patches fix the make kselftest
run and kselftest install.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=09md
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
x86 test due to its hard dependency on 32-bit build environment.
A set of 5 patches fix the make kselftest run and kselftest install"
* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests, x86: Rework x86 target architecture detection
selftests, x86: Remove useless run_tests rule
selftests/x86: install tests
selftest/x86: have no dependency on all when cross building
selftest/x86: build both bitnesses
Pull parisc fixes from Helge Deller:
"One important patch which fixes crashes due to stack randomization on
architectures where the stack grows upwards (currently parisc and
metag only).
This bug went unnoticed on parisc since kernel 3.14 where the flexible
mmap memory layout support was added by commit 9dabf60dc4. The
changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
and will not affect other platforms.
The other two patches rename args of the kthread_arg() function and
fixes a printk output"
* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
parisc: %pf is only for function pointers
In commit 8ff16cf77c ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:
http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074
It seems the parties involved agree that "jedec,spi-nor" does a better
job of capturing the fact that this is SPI-specific, not just any NOR
flash.
This binding was only merged for v4.1-rc1, so it's still OK to change
the naming.
At the same time, let's move the documentation to a better name.
Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the
documentation.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The ELPA bit in PageGrain is all about large *physical* addresses, so
correct the reference to "large virtual address" in the comment above
where it is set for MIPS64.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10038/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
cpu_set was removed (along with a bunch of cpumask helpers) by
commit 2f0f267ea0 ("cpumask: remove deprecated functions.").
Fix this by replacing cpu_set with cpumask_set_cpu. Without this
fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y.
arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup':
arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration]
Fixes: 90db024f14 ("MIPS: smp-cps: cpu_set FPU mask if FPU present")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Acked-by: Niklas Cassel <niklass@axis.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9912/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull x86 build fix from Ingo Molnar:
"A bzImage build fix on older distros"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Fix 'make bzImage' on older distros
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a suspend/resume related regression fix, and an RT priority
boosting fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix regression in cpuset_cpu_inactive() for suspend
sched: Handle priority boosted tasks proper in setscheduler()
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a lockdep annotation fix, a PMU event
list fix and a new model addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Fix compilation error
tools/liblockdep: Fix linker error in case of cross compile
perf tools: Use getconf to determine number of online CPUs
tools: Fix tools/vm build
perf/x86/rapl: Enable Broadwell-U RAPL support
perf/x86/intel: Fix SLM cache event list
perf: Annotate inherited event ctx->mutex recursion
Pull irq fix from Ingo Molnar:
"A tegra irqchip driver memory corruption fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: tegra: Set the proper base address in irq chip data
Pull drm fixes from Dave Airlie:
"Radeon:
one oops fix, one bug fix, one pci id addition patch
i915:
one suspend/resume regression fix.
All seems quiet enough."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
drm/i915: Avoid GPU hang when coming out of s3 or s4
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, numa: really disable NUMA balancing by default on single node machines
MAINTAINERS: update Jingoo Han's email address
CMA: page_isolation: check buddy before accessing it
uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER
kernfs: do not account ino_ida allocations to memcg
gfp: add __GFP_NOACCOUNT
tools/vm: fix page-flags build
drivers/rtc/rtc-armada38x.c: remove unused local `flags'
