Btrfs had compatibility code for kernels back to 2.6.18. These have
been removed, and will be maintained in a separate backport
git tree from now on.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The code to update the on disk i_size happens before the
ordered_extent record is removed. So, it is possible for multiple
ordered_extent completion routines to run at the same time, and to
find each other in the ordered tree.
The end result is they both decide not to update disk_i_size, leaving
it too small. This temporary fix just puts the updates inside
the extent_mutex. A real solution would be stronger ordering of
disk_i_size updates against removing the ordered extent from the tree.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch makes the back reference system to explicit record the
location of parent node for all types of extents. The location of
parent node is placed into the offset field of backref key. Every
time a tree block is balanced, the back references for the affected
lower level extents are updated.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Drop i_mutex during the commit
Don't bother doing the fsync at all unless the dir is marked as dirtied
and needing fsync in this transaction. For directories, this means
that someone has unlinked a file from the dir without fsyncing the
file.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_ilookup is unused, which is good because a normal filesystem
should never have to use ilookup anyway. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree. There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.
After a crash, items are copied out of the log tree and back into the
subvolume. See tree-log.c for all the details.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs actually stores the whole xattr name, including the prefix ondisk,
so using the generic resolver that strips off the prefix is not very
helpful. Instead do the real ondisk xattrs manually and only use the
generic resolver for synthetic xattrs like ACLs.
(Sorry Josef for guiding you towards the wrong direction here intially)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Date: Sun, 17 Aug 2008 15:14:48 +0100
We never get asked by the VFS to lookup either of them, and we can
handle the readdir() case a lot more simply, too.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Date: Mon, 21 Jul 2008 02:01:04 +0530
This patch introduces a btrfs_iget helper to be used in NFS support.
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This optimization had been removed because I thought it was triggering
csum errors. The real cause of the errors was elsewhere, and so
this optimization is back.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
add_extent_mapping was allowing the insertion of overlapping extents.
This never used to happen because it only inserted the extents from disk
and those were never overlapping.
But, with the data=ordered code, the disk and memory representations of the
file are not the same. add_extent_mapping needs to ensure a new extent
does not overlap before it inserts.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The writeback_index field is used by write_cache_pages to pick up where
writeback on a given inode left off. But, it is never set to a sane
value, so writeback can often start at a random offset in the file.
Kernels 2.6.28 and higher will have this fixed, but for everyone else,
we also fill in the value in btrfs.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
rename and link don't always have a lock on the source inode, and
our use of a per-inode index variable was racy. This changes things to
store the index in a local variable instead.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Large streaming reads make for large bios, which means each entry on the
list async work queues represents a large amount of data. IO
congestion throttling on the device was kicking in before the async
worker threads decided a single thread was busy and needed some help.
The end result was that a streaming read would result in a single CPU
running at 100% instead of balancing the work off to other CPUs.
This patch also changes the pre-IO checksum lookup done by reads to
work on a per-bio basis instead of a per-page. This results in many
extra btree lookups on large streaming reads. Doing the checksum lookup
right before bio submit allows us to reuse searches while processing
adjacent offsets.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add a couple of #if's to follow API changes.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The memory reclaiming issue happens when snapshot exists. In that
case, some cache entries may not be used during old snapshot dropping,
so they will remain in the cache until umount.
The patch adds a field to struct btrfs_leaf_ref to record create time. Besides,
the patch makes all dead roots of a given snapshot linked together in order of
create time. After a old snapshot was completely dropped, we check the dead
root list and remove all cache entries created before the oldest dead root in
the list.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
To check whether a given file extent is referenced by multiple snapshots, the
checker walks down the fs tree through dead root and checks all tree blocks in
the path.
We can easily detect whether a given tree block is directly referenced by other
snapshot. We can also detect any indirect reference from other snapshot by
checking reference's generation. The checker can always detect multiple
references, but can't reliably detect cases of single reference. So btrfs may
do file data cow even there is only one reference.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
A large reference cache is directly related to a lot of work pending
for the cleaner thread. This throttles back new operations based on
the size of the reference cache so the cleaner thread will be able to keep
up.
Overall, this actually makes the FS faster because the cleaner thread will
be more likely to find things in cache.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This changes the reference cache to make a single cache per root
instead of one cache per transaction, and to key by the byte number
of the disk block instead of the keys inside.
This makes it much less likely to have cache misses if a snapshot
or something has an extra reference on a higher node or a leaf while
the first transaction that added the leaf into the cache is dropping.
Some throttling is added to functions that free blocks heavily so they
wait for old transactions to drop.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Remove a unused variable 'path' in fixup_tree_root_location.
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Checksum items are not inserted into the tree until all of the io from a
given extent is complete. This means one dirty page from an extent may
be written, freed, and then read again before the entire extent is on disk
and the checksum item is inserted.
The checksums themselves are stored in the ordered extent so they can
be inserted in bulk when IO is complete. On read, if a checksum item isn't
found, the ordered extents were being searched for a checksum record.
This all worked most of the time, but the checksum insertion code tries
to reduce the number of tree operations by pre-inserting checksum items
based on i_size and a few other factors. This means the read code might
find a checksum item that hasn't yet really been filled in.
This commit changes things to check the ordered extents first and only
dive into the btree if nothing was found. This removes the need for
extra locking and is more reliable.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Stress testing was showing data checksum errors, most of which were caused
by a lookup bug in the extent_map tree. The tree was caching the last
pointer returned, and searches would check the last pointer first.
But, search callers also expect the search to return the very first
matching extent in the range, which wasn't always true with the last
pointer usage.
For now, the code to cache the last return value is just removed. It is
easy to fix, but I think lookups are rare enough that it isn't required anymore.
This commit also replaces do_sync_mapping_range with a local copy of the
related functions.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Before, extent buffers were a temporary object, meant to map a number of pages
at once and collect operations on them.
But, a few extra fields have crept in, and they are also the best place to
store a per-tree block lock field as well. This commit puts the extent
buffers into an rbtree, and ensures a single extent buffer for each
tree block.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* In btrfs_delete_inode, wait for ordered extents after calling
truncate_inode_pages. This is much faster, and more correct
* Properly clear our the PageChecked bit everywhere we redirty the page.
* Change the writepage fixup handler to lock the page range and check to
see if an ordered extent had been inserted since the improperly dirtied
page was discovered
* Wait for ordered extents outside the transaction. This isn't required
for locking rules but does improve transaction latencies
* Reduce contention on the alloc_mutex by dropping it while incrementing
refs on a node/leaf and while dropping refs on a leaf.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
It was possible for stale mappings from disk to be used instead of the
new pending ordered extent. This adds a flag to the extent map struct
to keep it pinned until the pending ordered extent is actually on disk.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Data checksumming is done right before the bio is sent down the IO stack,
which means a single bio might span more than one ordered extent. In
this case, the checksumming data is split between two ordered extents.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_drop_extents is always called with a range lock held on the inode.
But, it may operate on extents outside that range as it drops and splits
them.
This patch adds a per-inode mutex that is held while calling
btrfs_drop_extents and while inserting new extents into the tree. It
prevents races from two procs working against adjacent ranges in the tree.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Checksum items are not inserted until the entire ordered extent is on disk,
but individual pages might be clean and available for reclaim long before
the whole extent is on disk.
In order to allow those pages to be freed, we need to be able to search
the list of ordered extents to find the checksum that is going to be inserted
in the tree. This way if the page needs to be read back in before
the checksums are in the btree, we'll be able to verify the checksum on
the page.
This commit adds the ability to search the pending ordered extents for
a given offset in the file, and changes btrfs_releasepage to allow
ordered pages to be freed.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_commit_transaction has to loop waiting for any writers in the
transaction to finish before it can proceed. btrfs_start_transaction
should be polite and not join a transaction that is in the process
of being finished off.
There are a few places that can't wait, basically the ones doing IO that
might be needed to finish the transaction. For them, btrfs_join_transaction
is added.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
