We now just warn the user about the fact and go on providing just
userspace samples.
This fixes a problem when no vmlinux is explicetely passed by the user,
thus symbol_conf.vmlinux_name is NULL, no suitable vmlinux is found, and
then we get:
aldebaran:~> perf top -p 7557
[kernel.kallsyms] with build id 44d9a989eabbd79e486bc079d6b743d397c204e0
not found, continuing without symbols
The (null) file can't be used
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-cj2g81hn64wv2bipmqk4fy2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evsel__alloc_fd allocates an array of file descriptors with the
memory initialized to 0. The array has dimensions for cpus and threads.
Later, __perf_evsel__open calls sys_perf_event_open for each cpu and thread
dimensions. If the open fails for any of the cpus or threads then the fd's
for this event are closed and the fd entry in the array is set to -1. Now,
if the first attempt fails for the event (e.g., the event is not supported)
the remaining dimensions (cpu > 0 and thread > 0) are not touched and left
at the initialized value of 0.
builtin-stat catches ENOENT and ENOSYS failures and allows the command to
continue. The end result is that stat attempts to read from an fd of 0 which
of course is stdin and so the command hangs until you type ctrl-D.
Resolve by initializing the array to -1 since an fd < 0 is already
handled.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306511914-8016-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge reason: Linus applied an overlapping commit:
5f2e8e2b0b: kernel/watchdog.c: Use proper ANSI C prototypes
So merge it in to make sure we can iterate the file without conflicts.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Choosing TMPFS_XATTR default N was switching off TMPFS_POSIX_ACL,
even if it had been Y in oldconfig; and Linus reports that PulseAudio
goes subtly wrong unless it can use ACLs on /dev/shm.
Make TMPFS_POSIX_ACL select TMPFS_XATTR (and depend upon TMPFS),
and move the TMPFS_POSIX_ACL entry before the TMPFS_XATTR entry,
to avoid asking unnecessary questions then ignoring their answers.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Witold reported a reboot caused by the selftests of the dynamic function
tracer. He sent me a config and I used ktest to do a config_bisect on it
(as my config did not cause the crash). It pointed out that the problem
config was CONFIG_PROVE_RCU.
What happened was that if multiple callbacks are attached to the
function tracer, we iterate a list of callbacks. Because the list is
managed by synchronize_sched() and preempt_disable, the access to the
pointers uses rcu_dereference_raw().
When PROVE_RCU is enabled, the rcu_dereference_raw() calls some
debugging functions, which happen to be traced. The tracing of the debug
function would then call rcu_dereference_raw() which would then call the
debug function and then... well you get the idea.
I first wrote two different patches to solve this bug.
1) add a __rcu_dereference_raw() that would not do any checks.
2) add notrace to the offending debug functions.
Both of these patches worked.
Talking with Paul McKenney on IRC, he suggested to add recursion
detection instead. This seemed to be a better solution, so I decided to
implement it. As the task_struct already has a trace_recursion to detect
recursion in the ring buffer, and that has a very small number it
allows, I decided to use that same variable to add flags that can detect
the recursion inside the infrastructure of the function tracer.
I plan to change it so that the task struct bit can be checked in
mcount, but as that requires changes to all archs, I will hold that off
to the next merge window.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.com
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To avoid 64->32 truncating WARNING, update btrfs's tracepoints.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/4DACE6E3.8080200@cn.fujitsu.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Filesystem, like Btrfs, has some "ULL" macros, and when these macros are passed
to tracepoints'__print_symbolic(), there will be 64->32 truncate WARNINGS during
compiling on 32bit box.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/4DACE6E0.7000507@cn.fujitsu.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When dynamic ftrace is not configured, the ops->flags still needs
to have its FTRACE_OPS_FL_ENABLED bit set in ftrace_startup().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The self tests for event tracer does not check if the function
tracing was successfully activated. It needs to before it continues
the tests, otherwise the wrong errors may be reported.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The register_ftrace_function() returns an error code on failure
except if the call to ftrace_startup() fails. Add a error return to
ftrace_startup() if it fails to start, allowing register_ftrace_funtion()
to return a proper error value.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix this:
drivers/video/mb862xx/mb862xx-i2c.c: In function 'mb862xx_i2c_wait_event':
drivers/video/mb862xx/mb862xx-i2c.c:25: error: implicit declaration of function 'udelay'
caused by commit f8a6b1f448 ("video: mb862xx: add support for
controller's I2C bus adapter").
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/linux-2.6-nsfd:
net: fix get_net_ns_by_fd for !CONFIG_NET_NS
ns proc: Return -ENOENT for a nonexistent /proc/self/ns/ entry.
ns: Declare sys_setns in syscalls.h
net: Allow setting the network namespace by fd
ns proc: Add support for the ipc namespace
ns proc: Add support for the uts namespace
ns proc: Add support for the network namespace.
ns: Introduce the setns syscall
ns: proc files for namespace naming policy.
Commit a71ae47a2c ("slub: Fix double bit unlock in debug mode")
removed the only goto to this label, resulting in
mm/slub.c: In function '__slab_alloc':
mm/slub.c:1834: warning: label 'unlock_out' defined but not used
fixed trivially by the removal of the label itself too.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (89 commits)
bonding: documentation and code cleanup for resend_igmp
bonding: prevent deadlock on slave store with alb mode (v3)
net: hold rtnl again in dump callbacks
Add Fujitsu 1000base-SX PCI ID to tg3
bnx2x: protect sequence increment with mutex
sch_sfq: fix peek() implementation
isdn: netjet - blacklist Digium TDM400P
via-velocity: don't annotate MAC registers as packed
xen: netfront: hold RTNL when updating features.
sctp: fix memory leak of the ASCONF queue when free asoc
net: make dev_disable_lro use physical device if passed a vlan dev (v2)
net: move is_vlan_dev into public header file (v2)
bug.h: Fix build with CONFIG_PRINTK disabled.
wireless: fix fatal kernel-doc error + warning in mac80211.h
wireless: fix cfg80211.h new kernel-doc warnings
iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabled
dst: catch uninitialized metrics
be2net: hash key for rss-config cmd not set
bridge: initialize fake_rtable metrics
net: fix __dst_destroy_metrics_generic()
...
Fix up trivial conflicts in drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
When iterating the jump_label entries array (core or modules),
the __jump_label_update function peeks over the last entry.
The reason is that the end of the for loop depends on the key
value of the processed entry. Thus when going through the
last array entry, we will touch the memory behind the array
limit.
This bug probably will never be triggered, since most likely the
memory behind the jump_label entries will be accesable and the
entry->key will be different than the expected value.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/20110510104346.GC1899@jolsa.brq.redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While find_secsym_ndx often finds the unamed local STT_SECTION, if a
section has only one function in it, the ARM toolchain generates the
STT_FUNC symbol before the STT_SECTION, and recordmcount finds this
instead.
This is problematic on ARM because in ARM ELFs, "if a [STT_FUNC] symbol
addresses a Thumb instruction, its value is the address of the
instruction with bit zero set (in a relocatable object, the section
offset with bit zero set)". This leads to incorrect mcount addresses
being recorded.
Fix this by not using STT_FUNC symbols as the base on ARM.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Link: http://lkml.kernel.org/r/1305134631-31617-1-git-send-email-rabin@rab.in
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seems that Peter Zijlstra treats us emacs users as second class
citizens and the commit:
commit 15664125f7
Author: Peter Zijlstra <peterz@infradead.org>
scripts/tags.sh: Add magic for trace-events
only updated ctags (for vim) and did not do the work to let us
lowly emacs users benefit from such a change.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The regex to handle DEFINE_EVENT() should not be the same as
the TRACE_EVENT() as the first parameter in DEFINE_EVENT is the
template name, not the event name. We need the second parameter
as that is what the trace_... will use.
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to commit dc326fca2b (x86, cpu: Clean up and unify the NOP selection infrastructure), we get the following warning:
arch/x86/kernel/ftrace.c: In function ‘ftrace_make_nop’:
arch/x86/kernel/ftrace.c:308:6: warning: assignment discards qualifiers from pointer target type
arch/x86/kernel/ftrace.c: In function ‘ftrace_make_call’:
arch/x86/kernel/ftrace.c:318:6: warning: assignment discards qualifiers from pointer target type
ftrace_nop_replace() now returns const unsigned char *, so change its associated function/variable to its compatible type to keep compiler clam.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Link: http://lkml.kernel.org/r/1305221620.7986.4.camel@localhost.localdomain
[ updated for change of const void *src in probe_kernel_write() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions probe_kernel_write() and probe_kernel_read() do not modify
the src pointer. Allow const pointers to be passed in without the need
of a typecast.
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1305824936.1465.4.camel@gandalf.stny.rr.com
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits)
mmc: core: eMMC bus width may not work on all platforms
mmc: sdhci: Auto-CMD23 fixes.
mmc: sdhci: Auto-CMD23 support.
mmc: core: Block CMD23 support for UHS104/SDXC cards.
mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.
mmc: core: Use CMD23 for multiblock transfers when we can.
mmc: quirks: Add/remove quirks conditional support.
mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver
mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w
mmc: core: duplicated trial with same freq in mmc_rescan_try_freq()
mmc: core: add support for eMMC Dual Data Rate
mmc: core: eMMC signal voltage does not use CMD11
mmc: sdhci-pxa: add platform code for UHS signaling
mmc: sdhci: add hooks for setting UHS in platform specific code
mmc: core: clear MMC_PM_KEEP_POWER flag on resume
mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume
mmc: sdhi: allow powering down controller with no card inserted
mmc: tmio: runtime suspend the controller, where possible
mmc: sdhi: support up to 3 interrupt sources
mmc: sdhi: print physical base address and clock rate
...
* 'kconfig-for-40' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
xconfig: merge code path to conf_write()
kconfig: do not record timestamp in .config
gconfig: Hide unused left treeview when start up the interface
gconfig: enable rules hint for main treeviews
MAINTAINERS: Update KCONFIG entry
kconfig-language: add to hints
kconfig: Document the new "visible if" syntax
kconfig: quiet commands when V=0
kconfig: change update-po-config to reflect new layout of arch/um
kconfig: make update-po-config work in KBUILD_OUTPUT
kconfig: rearrange clean-files
kconfig: change gconf to modify hostprogs-y like nconf and mconf
kconfig: change qconf to modify hostprogs-y like nconf and mconf
kconfig: only build kxgettext when needed
nconfig: Silence unused return values from wattrset
kconfig: Do not record timestamp in auto.conf and autoconf.h
kconfig: get rid of unused flags
kconfig: allow multiple inclusion of the same file
kconfig: Avoid buffer underrun in choice input
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc:
signal: sys_pause() should check signal_pending()
ptrace: ptrace_resume() shouldn't wake up !TASK_TRACED thread
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: New driver for the SMSC EMC6W201
hwmon: (abituguru) Depend on DMI
hwmon: (it87) Use request_muxed_region
hwmon: (sch5627) Trigger Vbat measurements
hwmon: (sch5627) Add sch5627_send_cmd function
i8k: Integrate with the hwmon subsystem
hwmon: (max6650) Properly support the MAX6650
hwmon: (max6650) Drop device detection
Move ACPI power meter driver to hwmon
hwmon: (f71882fg) Add support for F71808A
hwmon: (f71882fg) Split has_beep in fan_has_beep and temp_has_beep
hwmon: (asc7621) Drop duplicate dependency
hwmon: (jc42) Change detection class
hwmon: Add driver for AMD family 15h processor power information
hwmon: (k10temp) Add support for Fam15h (Bulldozer)
hwmon: Use helper functions to set and get driver data
i8k: Avoid lahf in 64-bit code
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (26 commits)
arch/tile: prefer "tilepro" as the name of the 32-bit architecture
compat: include aio_abi.h for aio_context_t
arch/tile: cleanups for tilegx compat mode
arch/tile: allocate PCI IRQs later in boot
arch/tile: support signal "exception-trace" hook
arch/tile: use better definitions of xchg() and cmpxchg()
include/linux/compat.h: coding-style fixes
tile: add an RTC driver for the Tilera hypervisor
arch/tile: finish enabling support for TILE-Gx 64-bit chip
compat: fixes to allow working with tile arch
arch/tile: update defconfig file to something more useful
tile: do_hardwall_trap: do not play with task->sighand
tile: replace mm->cpu_vm_mask with mm_cpumask()
tile,mn10300: add device parameter to dma_cache_sync()
audit: support the "standard" <asm-generic/unistd.h>
arch/tile: clarify flush_buffer()/finv_buffer() function names
arch/tile: kernel-related cleanups from removing static page size
arch/tile: various header improvements for building drivers
arch/tile: disable GX prefetcher during cache flush
arch/tile: tolerate disabling CONFIG_BLK_DEV_INITRD
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (37 commits)
Blackfin: use new common PERCPU_INPUT define
MAINTAINERS: Fix Analog Devices mailinglist address
Blackfin: boards: update ASoC resources after machine driver overhaul
Blackfin: work around anomaly 05000480
Blackfin: fix addr type with bfin_write_{or,and} helpers
Blackfin: convert /proc/sram to seq_file
Blackfin: switch /proc/gpio to seq_file
Blackfin: fix indentation with bfin_read() helper
Blackfin: convert old cpumask API to new one
Blackfin: don't touch task->cpus_allowed directly
Blackfin: don't touch cpu_possible_map and cpu_present_map directly
Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout
Blackfin: initial perf_event support
Blackfin: update anomaly lists to latest public info
Blackfin: use on-chip reset func with newer parts
Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
Blackfin: optimize MMR reads during startup a bit
Blackfin: bf537: demux port H mask A and emac rx ints
Blackfin: bf537: fix excessive gpio int demuxing
Blackfin: bf54x: drop unused pm gpio handling
...
* 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (34 commits)
ARM: mach-shmobile: mackerel: add renesas_usbhs support for USB1
ARM: mach-shmobile: Correct the G4EVM SDHI0 I/O range.
ARM: arch-shmobile: sh7372: add renesas_usbhs irq support
ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalid
ARM: mach-shmobile: mark DMA slave ID 0 as invalid
ARM: mach-shmobile: Enable DMAEngine for SDHI on AG5EVM
ARM: mach-shmobile: Enable DMAEngine for MMCIF on AG5EVM
ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC
dmaengine: shdma: Update SH_DMAC_MAX_CHANNELS to 20
dmaengine: shdma: Fix SH_DMAC_MAX_CHANNELS handling
dmaengine: shdma: Make second memory window optional
ARM: mach-shmobile: Tidy up after SH7372 pm changes.
ARM: mach-shmobile: sh7372 Core Standby CPUIdle
ARM: mach-shmobile: CPUIdle support
ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAM
ARM: mach-shmobile: Suspend-to-RAM support
mailmap: Add entry for Damian Hobson-Garcia.
ARM: switch mackerel to dynamically manage the platform camera
ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0
ARM: arch-shmobile: Use multiple irq vectors for SDHI
...
commit 9ec2690758 ("timerfd: Manage cancelable timers in timerfd")
introduced a CONFIG_HIGHRES_TIMERS (should be CONFIG_HIGH_RES_TIMERS)
typo, which caused applications depending on CLOCK_REALTIME timers to
become sluggy due to the fact that the time base of the realtime
timers was not updated when the wall clock time was set.
This causes anything from 100% CPU use for some applications to odd
delays and hickups.
Reported-bisected-and-tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fatfingered-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Improves the documentation about how IGMP resend parameter
works, fix two missing checks and coding style issues.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This soft lockup was recently reported:
[root@dell-per715-01 ~]# echo +bond5 > /sys/class/net/bonding_masters
[root@dell-per715-01 ~]# echo +eth1 > /sys/class/net/bond5/bonding/slaves
bonding: bond5: doing slave updates when interface is down.
bonding bond5: master_dev is not up in bond_enslave
[root@dell-per715-01 ~]# echo -eth1 > /sys/class/net/bond5/bonding/slaves
bonding: bond5: doing slave updates when interface is down.
BUG: soft lockup - CPU#12 stuck for 60s! [bash:6444]
CPU 12:
Modules linked in: bonding autofs4 hidp rfcomm l2cap bluetooth lockd sunrpc
be2d
Pid: 6444, comm: bash Not tainted 2.6.18-262.el5 #1
RIP: 0010:[<ffffffff80064bf0>] [<ffffffff80064bf0>]
.text.lock.spinlock+0x26/00
RSP: 0018:ffff810113167da8 EFLAGS: 00000286
RAX: ffff810113167fd8 RBX: ffff810123a47800 RCX: 0000000000ff1025
RDX: 0000000000000000 RSI: ffff810123a47800 RDI: ffff81021b57f6f8
RBP: ffff81021b57f500 R08: 0000000000000000 R09: 000000000000000c
R10: 00000000ffffffff R11: ffff81011d41c000 R12: ffff81021b57f000
R13: 0000000000000000 R14: 0000000000000282 R15: 0000000000000282
FS: 00002b3b41ef3f50(0000) GS:ffff810123b27940(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002b3b456dd000 CR3: 000000031fc60000 CR4: 00000000000006e0
Call Trace:
[<ffffffff80064af9>] _spin_lock_bh+0x9/0x14
[<ffffffff886937d7>] :bonding:tlb_clear_slave+0x22/0xa1
[<ffffffff8869423c>] :bonding:bond_alb_deinit_slave+0xba/0xf0
[<ffffffff8868dda6>] :bonding:bond_release+0x1b4/0x450
[<ffffffff8006457b>] __down_write_nested+0x12/0x92
[<ffffffff88696ae4>] :bonding:bonding_store_slaves+0x25c/0x2f7
[<ffffffff801106f7>] sysfs_write_file+0xb9/0xe8
[<ffffffff80016b87>] vfs_write+0xce/0x174
[<ffffffff80017450>] sys_write+0x45/0x6e
[<ffffffff8005d28d>] tracesys+0xd5/0xe0
It occurs because we are able to change the slave configuarion of a bond while
the bond interface is down. The bonding driver initializes some data structures
only after its ndo_open routine is called. Among them is the initalization of
the alb tx and rx hash locks. So if we add or remove a slave without first
opening the bond master device, we run the risk of trying to lock/unlock a
spinlock that has garbage for data in it, which results in our above softlock.
Note that sometimes this works, because in many cases an unlocked spinlock has
the raw_lock parameter initialized to zero (meaning that the kzalloc of the
net_device private data is equivalent to calling spin_lock_init), but thats not
true in all cases, and we aren't guaranteed that condition, so we need to pass
the relevant spinlocks through the spin_lock_init function.
Fix it by moving the spin_lock_init calls for the tx and rx hashtable locks to
the ndo_init path, so they are ready for use by the bond_store_slaves path.
Change notes:
v2) Based on conversation with Jay and Nicolas it seems that the ability to
enslave devices while the bond master is down should be safe to do. As such
this is an outlier bug, and so instead we'll just initalize the errant spinlocks
in the init path rather than the open path, solving the problem. We'll also
remove the warnings about the bond being down during enslave operations, since
it should be safe
v3) Fix spelling error
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: jtluka@redhat.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: nicolas.2p.debian@gmail.com
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e67f88dd12 (dont hold rtnl mutex during netlink dump callbacks)
missed fact that rtnl_fill_ifinfo() must be called with rtnl held.
Because of possible deadlocks between two mutexes (cb_mutex and rtnl),
its not easy to solve this problem, so revert this part of the patch.
It also forgot one rcu_read_unlock() in FIB dump_rules()
Add one ASSERT_RTNL() in rtnl_fill_ifinfo() to remind us the rule.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the PCI ID of Fujitsu 1000base-SX NIC to tg3 driver.
Tested to detect the card, MAC and serdes, not tested with link at the
moment since I have no fiber switch here. I did not add new constants to
the pci_ids.h header file since these constants are used only here.
Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit eeaeb068f1 (sch_sfq: allow big packets and be fair),
sfq_peek() can return a different skb that would be normally dequeued by
sfq_dequeue() [ if current slot->allot is negative ]
Use generic qdisc_peek_dequeued() instead of custom implementation, to
get consistent result.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jarek Poplawski <jarkao2@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Jesper Dangaard Brouer <hawk@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
[2nd try ... 1st attempt didn't make it to netdev mailing list]
A quick google search reveals that people with this card are blacklisting it
in the initramfs and in the module blacklist based on a statement that it
is unsupported. Since the older Digium is also unsupported I'm pretty
confident that this newer card is also not supported.
lspci -xxx -vv shows
04:07.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Device b100:0003
P.
----8<----
The Asterisk Voice Card, DIGIUM TDM400P is unsupported by the netjet driver.
Blacklist it like the Digium X100P/X101P card.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On ARM, memory accesses through packed pointers behave in unexpected
ways in GCC releases 4.3 and higher; see https://lkml.org/lkml/2011/2/2/163
for discussion.
In this particular case, 32-bit I/O registers are accessed bytewise,
causing incorrect setting of the DMA address registers which in turn
leads to an error interrupt storm that brings the system to a halt.
Since the mac_regs structure does not need any packing anyway, this patch
simply removes the attribute to fix the issue.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an ASCONF chunk is outstanding, then the following ASCONF
chunk will be queued for later transmission. But when we free
the asoc, we forget to free the ASCONF queue at the same time,
this will cause memory leak.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the device passed into dev_disable_lro is a vlan, then repoint the dev
poniter so that we actually modify the underlying physical device.
Signed-of-by: Neil Horman <nhorman@tuxdriver.com>
CC: davem@davemloft.net
CC: bhutchings@solarflare.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Migrate is_vlan_dev() to if_vlan.h so that core networkig can use it
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: davem@davemloft.net
CC: bhutchings@solarflare.com
Signed-off-by: David S. Miller <davem@davemloft.net>
CMD19 -- The offical way to validate bus widths from the JEDEC spec
does not work on all platforms. Some platforms that use PCI/PCIe
to connect their SD controllers are known to fail.
If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out
the bus width by reading the ext_csd at different bus widths and
compare this against the ext_csd read in 1 bit mode. If no ext_csd
is available we default to 1 bit operations.
Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB
card that is known to not work in 4 bit mode. The physical pins
on the card are not present to support 4 bit operation.
Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
