1
0
Fork 0
remarkable-linux/drivers/usb
Alan Stern d5d4db704b USB: replace flush_workqueue with cancel_sync_work
This patch (as912) replaces a couple of calls to flush_workqueue()
with cancel_sync_work() and cancel_rearming_delayed_work().  Using a
more directed approach allows us to avoid some nasty deadlocks.  The
prime example occurs when a first-level device (the parent is a root
hub) is removed while at the same time the root hub gets a remote
wakeup request.  khubd would try to flush the autosuspend workqueue
while holding the root-hub's lock, and the remote-wakeup workqueue
routine would be waiting to lock the root hub.

The patch also reorganizes the power management portion of
usb_disconnect(), separating it out into its own routine.  The
autosuspend workqueue entry is cancelled immediately instead of
waiting for the device's release routine.  In addition,
synchronization with the autosuspend thread is carried out even for
root hubs (an oversight in the original code).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Mark Lord <lkml@rtr.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-29 13:39:07 -07:00
..
atm usbatm_heavy_init: don't use CLONE_SIGHAND 2007-05-09 12:30:53 -07:00
class USB: usblp: Use correct DMA address in case of probe error 2007-05-22 23:45:50 -07:00
core USB: replace flush_workqueue with cancel_sync_work 2007-05-29 13:39:07 -07:00
gadget USB: fsl_usb2_udc: Fix UMTI_WIDE support and a compile warning 2007-05-22 23:45:49 -07:00
host ehci-fsl: fix cache coherency problem on system with large memory 2007-05-23 20:14:15 -07:00
image header cleaning: don't include smp_lock.h when not used 2007-05-08 11:15:07 -07:00
misc USB: ldusb bugfix 2007-05-22 23:45:51 -07:00
mon header cleaning: don't include smp_lock.h when not used 2007-05-08 11:15:07 -07:00
serial USB: Add support for Olimex arm-usb-ocd JTAG interface serial port 2007-05-22 23:45:51 -07:00
storage USB: Onetouch - switch to using input_dev->dev.parent 2007-05-22 23:45:50 -07:00
Kconfig [S390] Kconfig: menus with depends on HAS_IOMEM. 2007-05-10 15:46:07 +02:00
Makefile Move USB network drivers to drivers/net/usb. 2007-05-09 21:31:55 -04:00
README Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
usb-skeleton.c USB: kill BKL in skeleton driver 2007-04-27 13:28:33 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.