redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity
remarkable-uboot/include/configs
History
Simon Glass 7fe0933c58 video: Drop unused console functions 
CONFIG_CONSOLE_CURSOR, CONFIG_SYS_CONSOLE_BLINK_COUNT and
CONFIG_CONSOLE_TIME are not used by any board. The implementation is not
great and stands in the way of a refactor of i8042. Drop these for now.
They can be re-introduced quite easily later, perhaps with driver-model
real-time-clock (RTC) support.

When reintroducing, it might be useful to make a few changes:
- Blink time would be more useful than blink count
- The confusing #ifdefs should be avoided
- The time functions should support driver model
- It would be best keyed off console_tstc() or some similar idle loop
    rather than a particular input driver (i8042 in this case)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
 		2015-11-19 20:13:40 -07:00
..
km km8309: change the default QE_FW address 2015-11-18 15:28:57 -05:00
manroland Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
3c120_devboard.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
10m50_devboard.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
B4860QDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
BSC9131RDB.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
BSC9132QDS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
C29XPCIE.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
CPCI2DP.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
CPCI4052.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
M5208EVBE.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5235EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5249EVB.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
M5253DEMO.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
M5253EVBE.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
M5272C3.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5275EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5282EVB.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
M5329EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5373EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5475EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M5485EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M52277EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M53017EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M54418TWR.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M54451EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
M54455EVB.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
MIP405.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC832XEMDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC837XEMDS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
MPC837XERDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
MPC8308RDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
MPC8313ERDB.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
MPC8315ERDB.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8323ERDB.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8349EMDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8349ITX.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8536DS.h video: Drop unused console functions 2015-11-19 20:13:40 -07:00
MPC8540ADS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8541CDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8544DS.h video: Drop unused console functions 2015-11-19 20:13:40 -07:00
MPC8548CDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8555CDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8560ADS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8568MDS.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8569MDS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
MPC8572DS.h video: Drop unused console functions 2015-11-19 20:13:40 -07:00
MPC8610HPCD.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
MPC8641HPCN.h video: Drop unused console functions 2015-11-19 20:13:40 -07:00
MigoR.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
P1010RDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
P1022DS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
P1023RDB.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
P2041RDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
P3041DS.h
…
P4080DS.h
…
P5020DS.h
…
P5040DS.h
…
PATI.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
PIP405.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
PLU405.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
PMC405DE.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
PMC440.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
T102xQDS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
T102xRDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
T104xRDB.h T104xD4RDB: Fix PHY address for PHY connected to FM1@DTSEC3 2015-11-02 08:51:10 -08:00
T208xQDS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
T208xRDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
T1040QDS.h powerpc/t1040qds: enable peripheral clock for eSDHC 2015-11-02 08:50:15 -08:00
T4240QDS.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
T4240RDB.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
TQM823L.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM823M.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM834x.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM850L.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM850M.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM855L.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM855M.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM860L.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM860M.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM862L.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM862M.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM866M.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM885D.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
TQM5200.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
UCP1020.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
VCMA9.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
VOM405.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
a3m071.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
a4m072.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
ac14xx.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
acadia.h
…
adp-ag101p.h NDS32: Generic Board Support and Unsupport 2015-08-28 11:46:35 -04:00
alt.h defconfig: Move CONFIG_SPI_FLASH_BAR from configs 2015-07-01 21:39:06 +05:30
am43xx_evm.h ARM: am43xx: Enable QUAD read and EDMA support for ti_qspi 2015-11-17 23:43:29 +05:30
am57xx_evm.h board: ti: beagle_x15: Rename to indicate support for TI am57xx evms 2015-11-18 08:47:03 -05:00
am335x_evm.h board/ti/am335x: add support for BeagleBone Green 2015-11-18 14:50:07 -05:00
am335x_igep0033.h
…
am335x_sl50.h board: Add Toby-Churchill SL50 board support. 2015-09-11 17:15:27 -04:00
am3517_crane.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
am3517_evm.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
amcc-common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
amcore.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
ap325rxa.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
ap_sh4a_4a.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
apalis_t30.h net: Move CONFIG_E1000 options to Kconfig 2015-08-21 16:40:23 -05:00
apf27.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
apx4devkit.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
arcangel4.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
aria.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
aristainetos-common.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
aristainetos.h arm, imx6: add aristainetos 2b board version 2015-09-02 15:38:16 +02:00
aristainetos2.h arm, imx6: add aristainetos 2b board version 2015-09-02 15:38:16 +02:00
aristainetos2b.h arm, imx6: add aristainetos 2b board version 2015-09-02 15:38:16 +02:00
armadillo-800eva.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
arndale.h arndale: Apply Cortex-A15 errata #773022 and #774769 2015-10-11 17:12:11 -04:00
aspenite.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
astro_mcf5373l.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
at91-sama5_common.h ARM: at91: sama5: change the environment address to 0x6000 2015-11-01 22:02:16 +01:00
at91rm9200ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9m10g45ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9n12ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9rlek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9x5ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9260ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9261ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
at91sam9263ek.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
atngw100.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
atngw100mkii.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
atstk1002.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
axs101.h board: axs10x switch serial port and Ethernet to driver model 2015-11-18 00:39:22 +03:00
baltos.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
bamboo.h
…
bav335x.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
bayleybay.h x86: Remove CONFIG_SYS_EARLY_PCI_INIT 2015-11-13 06:46:26 -08:00
bcm28155_ap.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
bcm_ep_board.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
bct-brettl2.h net: Fix NET_RANDOM_ETHADDR dependencies 2015-06-01 13:15:11 -05:00
beaver.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
bf506f-ezkit.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
bf518f-ezbrd.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf525-ucr2.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
bf526-ezbrd.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
bf527-ad7160-eval.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf527-ezkit.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
bf527-sdp.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf533-ezkit.h net: Remove all references to CONFIG_ETHADDR and friends 2015-05-19 13:33:21 -05:00
bf533-stamp.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf537-minotaur.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
bf537-pnav.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf537-srv1.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
bf537-stamp.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf538f-ezkit.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
bf548-ezkit.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
bf561-acvilon.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
bf561-ezkit.h net: Remove all references to CONFIG_ETHADDR and friends 2015-05-19 13:33:21 -05:00
bf609-ezkit.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
bfin_adi_common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
bg0900.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
blackstamp.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
blackvme.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
br4.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
bubinga.h
…
bur_am335x_common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
calimain.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
canmb.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
canyonlands.h powerpc: ppc4xx: convert AMCC boards to generic board 2015-03-28 12:09:46 -04:00
cardhu.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
cgtqmx6eval.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
charon.h
…
chromebook_jerry.h rockchip: Add basic support for jerry 2015-09-02 21:28:24 -06:00
chromebook_link.h x86: Move CONFIG_ENV_IS_IN_SPI_FLASH to x86-common.h 2015-04-29 18:51:48 -06:00
chromebox_panther.h x86: panther: Add PCI and video configuration 2015-09-09 07:48:03 -06:00
cm-bf527.h net: Fix NET_RANDOM_ETHADDR dependencies 2015-06-01 13:15:11 -05:00
cm-bf533.h net: Remove all references to CONFIG_ETHADDR and friends 2015-05-19 13:33:21 -05:00
cm-bf537e.h net: Fix NET_RANDOM_ETHADDR dependencies 2015-06-01 13:15:11 -05:00
cm-bf537u.h net: Fix NET_RANDOM_ETHADDR dependencies 2015-06-01 13:15:11 -05:00
cm-bf548.h net: Remove all references to CONFIG_ETHADDR and friends 2015-05-19 13:33:21 -05:00
cm-bf561.h net: Remove all references to CONFIG_ETHADDR and friends 2015-05-19 13:33:21 -05:00
cm5200.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
cm_fx6.h arm: mx6: cm-fx6: define fallback boot devices for spl 2015-11-18 14:50:05 -05:00
cm_t35.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
cm_t43.h arm: am437x: Introduce new board cm-t43 2015-08-12 20:48:05 -04:00
cm_t54.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
cm_t335.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
cm_t3517.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
cobra5272.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
colibri_pxa270.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
colibri_t20.h apalis/colibri_t20/30: clean-up 2015-08-13 13:06:03 -07:00
colibri_t30.h apalis/colibri_t20/30: clean-up 2015-08-13 13:06:03 -07:00
colibri_vf.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
controlcenterd.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
corenet_ds.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
corvus.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
crownbay.h x86: Remove CONFIG_SYS_EARLY_PCI_INIT 2015-11-13 06:46:26 -08:00
cyrus.h mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
da850evm.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
dalmore.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
db-88f6820-gp.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
db-mv784mp-gp.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
dbau1x00.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
devkit3250.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
devkit8000.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
digsy_mtc.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
dlvision-10g.h dlvision-10g: Support displayport 2015-11-12 15:59:04 -05:00
dlvision.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
dnp5370.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
dns325.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
dockstar.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
dra7xx_evm.h ARM: dra7xx_evm: Add DFU support for qspi flash 2015-11-03 17:29:33 +01:00
draco.h arm, am33xx: update for siemens am335x based boards 2015-06-19 16:46:47 -04:00
dreamplug.h arm: kirkwood: Move common definitions into common file 2015-11-17 23:41:41 +01:00
duovero.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
e2220-1170.h e2220-1170: Remove hard-coded counter frequency 2015-09-16 16:10:23 -07:00
ea20.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
eb_cpu5282.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
eco5pk.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
ecovec.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
edb93xx.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
edminiv2.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
efi-x86.h tpm: Convert board config TPM options to Kconfig 2015-08-31 07:57:27 -06:00
embestmx6boards.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
espt.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
ethernut5.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
exynos-common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
exynos4-common.h usb: USB download gadget and functions config options coherent naming 2015-07-22 08:57:53 +02:00
exynos5-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
exynos5-dt-common.h exynos: Drop old exynos5250-specific board code 2015-08-05 21:06:16 -06:00
exynos5250-common.h exynos: config: Move common options to the common headers and tidy up 2015-08-05 21:06:16 -06:00
exynos5420-common.h exynos: Drop old exynos5420-specific board code 2015-08-05 21:06:16 -06:00
firefly-rk3288.h rockchip: Add basic support for firefly-rk3288 2015-09-02 21:28:24 -06:00
flea3.h imx35, flea3: add FIT image support 2015-10-30 15:11:52 +01:00
fx12mm.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
galileo.h x86: Remove CONFIG_SYS_EARLY_PCI_INIT 2015-11-13 06:46:26 -08:00
gdppc440etx.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
goflexhome.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
gose.h defconfig: Move CONFIG_SPI_FLASH_BAR from configs 2015-07-01 21:39:06 +05:30
gplugd.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
gr_cpci_ax2000.h sparc: leon3: Added memory controller initialization using new AMBA PnP routines. 2015-11-13 10:23:33 +02:00
gr_ep2s60.h sparc: leon3: Added memory controller initialization using new AMBA PnP routines. 2015-11-13 10:23:33 +02:00
gr_xc3s_1500.h sparc: leon3: Added memory controller initialization using new AMBA PnP routines. 2015-11-13 10:23:33 +02:00
grasshopper.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
grsim.h sparc: leon3: Added memory controller initialization using new AMBA PnP routines. 2015-11-13 10:23:33 +02:00
grsim_leon2.h sparc: Update LEON serial drivers to use readl/writel macros 2015-11-13 10:23:32 +02:00
guruplug.h arm: kirkwood: Move common definitions into common file 2015-11-17 23:41:41 +01:00
gw_ventana.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
h2200.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
harmony.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
highbank.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
hikey.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
hrcon.h hrcon: Add fan controllers 2015-11-12 18:04:10 -05:00
ib62x0.h arm: kirkwood: ib62x0: drop duplicate defines from CONFIG_SYS_MVFS 2015-11-17 23:41:41 +01:00
ibf-dsp561.h net: Remove all references to CONFIG_ETHADDR and friends 2015-05-19 13:33:21 -05:00
icon.h
…
iconnect.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
ids8313.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
imx6_spl.h imx: mx6slevk: add SPL support 2015-09-02 15:34:13 +02:00
imx27lite-common.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
imx31_phycore.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
inka4x0.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
integrator-common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
integratorap.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
integratorcp.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
intip.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
io.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
io64.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
iocon.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
ip04.h Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
ipam390.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
ipek01.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
jetson-tk1.h ARM: tegra: simplify GPU setup 2015-11-12 09:21:07 -07:00
jupiter.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
k2e_evm.h configs: k2*_evm: rename skernel binary names to generated file names 2015-07-27 15:03:12 -04:00
k2g_evm.h ARM: k2g: Add config file 2015-10-22 14:22:27 -04:00
k2hk_evm.h configs: k2*_evm: rename skernel binary names to generated file names 2015-07-27 15:03:12 -04:00
k2l_evm.h configs: k2*_evm: rename skernel binary names to generated file names 2015-07-27 15:03:12 -04:00
katmai.h
…
kilauea.h
…
km82xx.h km/powerpc: move open firmware defines to km-powerpc.h 2015-11-18 15:28:54 -05:00
km8360.h powerpc/km8360: fix the ODT parameters for CS0 2015-11-18 15:28:56 -05:00
km_kirkwood.h arm/km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS 2015-11-18 14:50:07 -05:00
kmp204x.h
…
koelsch.h defconfig: Move CONFIG_SPI_FLASH_BAR from configs 2015-07-01 21:39:06 +05:30
kwb.h board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...) 2015-11-12 13:17:27 -05:00
kzm9g.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
lacie_kw.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
lager.h defconfig: Move CONFIG_SPI_FLASH_BAR from configs 2015-07-01 21:39:06 +05:30
ls1021aqds.h ls102xa: Adjust some macros for SD boot on LS1021A QDS board 2015-10-30 09:19:48 -07:00
ls1021atwr.h configs: ls1021atwr: Enable ID EEPROM for SD boot 2015-10-30 09:19:48 -07:00
ls1043a_common.h armv8/ls1043a: Enable secondary cores 2015-10-29 10:34:02 -07:00
ls1043ardb.h armv8/ls1043ardb: Add sd boot support 2015-10-29 10:34:02 -07:00
ls2085a_common.h armv8/fsl_lsch3: Change arch to fsl-layerscape 2015-10-29 10:34:00 -07:00
ls2085a_emu.h drivers/fsl-mc: Changed MC firmware loading for new boot architecture 2015-04-23 08:55:57 -07:00
ls2085a_simu.h armv8/ls2085a_simu: enable eSDHC 2015-09-01 21:37:56 -05:00
ls2085aqds.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
ls2085ardb.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
lsxl.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
luan.h
…
lwmon5.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
m28evk.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
m53evk.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
makalu.h
…
malta.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
maxbcm.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mcx.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
mecp5123.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
medcom-wide.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
meesc.h arm: at91: reworked meesc board support 2015-11-03 14:21:32 +01:00
microblaze-generic.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
minnowmax.h x86: Remove CONFIG_SYS_EARLY_PCI_INIT 2015-11-13 06:46:26 -08:00
ml507.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
motionpro.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mpc5121-common.h
…
mpc5121ads.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mpc8308_p1m.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mpr2.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
ms7720se.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
ms7722se.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
ms7750se.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
mt_ventoux.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
munices.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mv-common.h arm: mvebu: Enable DM_SERIAL on AXP / A38x boards 2015-10-21 02:25:01 +02:00
mv-plug-common.h arm: kirkwood: Move common definitions into common file 2015-11-17 23:41:41 +01:00
mx6_common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
mx6cuboxi.h imx6: fix warnings due to switch to distro environment 2015-11-13 10:49:01 +01:00
mx6qarm2.h net: Move the CMD_NET config to defconfigs 2015-06-01 09:40:15 -05:00
mx6qsabreauto.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
mx6sabre_common.h imx: mx6sabresd: add i.MX6DQP Sabresd support 2015-10-30 15:15:36 +01:00
mx6sabresd.h imx: mx6sabresd discard PHYS_SDRAM_SIZE 2015-10-30 15:13:06 +01:00
mx6slevk.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
mx6sxsabresd.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
mx6ul_14x14_evk.h imx: mx6ul_14x14_evk: support lcdif display 2015-11-12 17:40:53 +01:00
mx7_common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
mx7dsabresd.h imx: mx7dsabresd: support lcdif 2015-11-12 17:41:20 +01:00
mx23_olinuxino.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
mx23evk.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
mx25pdk.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mx28evk.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
mx31ads.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mx31pdk.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
mx35pdk.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mx51evk.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mx53ard.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mx53evk.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mx53loco.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mx53smd.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
mxs.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
nas220.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
neo.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
nitrogen6x.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
nokia_rx51.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
novena.h arm: novena: Fix kernel_addr_r env variable 2015-11-12 17:34:15 +01:00
nyan-big.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
o2d.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
o2d300.h
…
o2dnt-common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
o2dnt2.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
o2i.h
…
o2mnt.h
…
o3dnt.h
…
odroid.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
odroid_xu3.h exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4. 2015-11-02 10:38:00 +09:00
omap3_beagle.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
omap3_cairo.h configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST 2015-09-28 10:15:46 -04:00
omap3_evm.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
omap3_evm_common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
omap3_evm_quick_mmc.h net: Move the CMD_NET config to defconfigs 2015-06-01 09:40:15 -05:00
omap3_evm_quick_nand.h net: Move the CMD_NET config to defconfigs 2015-06-01 09:40:15 -05:00
omap3_igep00x0.h igep00x0: Use BCH8 ECC 2015-10-19 17:06:16 -04:00
omap3_logic.h configs: Use config_distro_defaults.h in ti_armv7_common.h 2015-11-12 18:12:56 -05:00
omap3_overo.h configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST 2015-09-28 10:15:46 -04:00
omap3_pandora.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
omap3_zoom1.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
omap4_panda.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
omap4_sdp4430.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
omap5_uevm.h include: configs: Enable DWC3 and DFU in OMAP5 uEVM 2015-09-11 17:15:20 -04:00
omapl138_lcdk.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
openrd.h Revive OpenRD targets 2015-11-10 15:04:21 +01:00
openrisc-generic.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
origen.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
ot1200.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
p1_p2_rdb_pc.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
p1_twr.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
p2371-0000.h p2371: Remove hard-coded counter frequency 2015-09-16 16:10:23 -07:00
p2371-2180.h ARM: tegra: enable PCI support of p2371-2180 2015-11-12 09:21:06 -07:00
p2571.h ARM: tegra: simplify GPU setup 2015-11-12 09:21:07 -07:00
paz00.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
pb1x00.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
pcm030.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
pcm051.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
pcm052.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
pdm360ng.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
peach-pi.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
peach-pit.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
pengwyn.h pengwyn: nand and ethernet fixes 2015-11-12 18:13:19 -05:00
pepper.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
picosam9g45.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
platinum.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
platinum_picon.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
platinum_titanium.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
plutux.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
pm9g45.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
pm9261.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
pm9263.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
pogo_e02.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
porter.h defconfig: Move CONFIG_SPI_FLASH_BAR from configs 2015-07-01 21:39:06 +05:30
pr1.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
pxa-common.h
…
pxm2.h arm, am33xx: update for siemens am335x based boards 2015-06-19 16:46:47 -04:00
qemu-mips.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
qemu-mips64.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
qemu-ppce500.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
qemu-x86.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
r0p7734.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
r2dplus.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
r7780mp.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
rastaban.h siemens,am33x,rastaban: add rastaban config 2015-06-19 16:46:50 -04:00
rcar-gen2-common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
redwood.h
…
rk3288_common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
rpi-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
rpi.h ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE 2015-08-12 20:47:41 -04:00
rpi_2.h arm/rpi: Enable dcache 2015-08-12 20:47:43 -04:00
rsk7203.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
rsk7264.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
rsk7269.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
rut.h arm, am33xx: update for siemens am335x based boards 2015-06-19 16:46:47 -04:00
s5p_goni.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
s5pc210_universal.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
sama5d3_xplained.h ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h 2015-08-21 15:47:05 +02:00
sama5d3xek.h ARM: at91: sama5: update the spi flash mapping 2015-08-21 15:47:05 +02:00
sama5d4_xplained.h ARM: at91: sama5: update the spi flash mapping 2015-08-21 15:47:05 +02:00
sama5d4ek.h ARM: at91: sama5: update the spi flash mapping 2015-08-21 15:47:05 +02:00
sandbox.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
sansa_fuze_plus.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
sbc8349.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
sbc8548.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
sbc8641d.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
sc_sps_1.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
seaboard.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
secomx6quq7.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
sequoia.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
sh7752evb.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
sh7753evb.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
sh7757lcr.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
sh7763rdp.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
sh7785lcr.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
sheevaplug.h arm: kirkwood: Move common definitions into common file 2015-11-17 23:41:41 +01:00
shmin.h Move defaults from config_cmd_default.h to Kconfig 2015-06-25 22:18:34 -04:00
siemens-am33x-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
silk.h defconfig: Move CONFIG_SPI_FLASH_BAR from configs 2015-07-01 21:39:06 +05:30
smartweb.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
smdk2410.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
smdk5250.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
smdk5420.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
smdkc100.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
smdkv310.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
snapper9260.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
sniper.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
snow.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
socfpga_arria5_socdk.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
socfpga_common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
socfpga_cyclone5_socdk.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
socfpga_de0_nano_soc.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
socfpga_mcvevk.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
socfpga_sockit.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
socrates.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
som-6896.h x86: Remove CONFIG_SYS_EARLY_PCI_INIT 2015-11-13 06:46:26 -08:00
spear-common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
spear3xx_evb.h
…
spear6xx_evb.h
…
spring.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
stm32f429-discovery.h stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:34 +01:00
stout.h arm: rmobile: Add Stout board support 2015-08-31 17:32:59 +09:00
strider.h mpc83xx: Add strider board 2015-11-12 18:03:48 -05:00
stv0991.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
sun4i.h Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" 2015-06-28 11:46:31 -04:00
sun5i.h Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" 2015-06-28 11:46:31 -04:00
sun6i.h Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" 2015-06-28 11:46:31 -04:00
sun7i.h Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" 2015-06-28 11:46:31 -04:00
sun8i.h Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" 2015-06-28 11:46:31 -04:00
sun9i.h sun9i: Basic sun9i (A80) support 2015-05-29 13:46:36 +02:00
sunxi-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
suvd3.h powerpc/83xx: add support for kmtegr1 board 2015-11-18 15:28:58 -05:00
t3corp.h
…
t4qds.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
tam3517-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
tao3530.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
taurus.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
tb100.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
tbs2910.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
tcm-bf518.h net: Fix NET_RANDOM_ETHADDR dependencies 2015-06-01 13:15:11 -05:00
tcm-bf537.h net: Fix NET_RANDOM_ETHADDR dependencies 2015-06-01 13:15:11 -05:00
tec-ng.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
tec.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
tegra-common-post.h ARM: tegra: enable CONFIG_SYS_NONCACHED_MEMORY everywhere 2015-11-10 18:04:30 +01:00
tegra-common-usb-gadget.h ARM: tegra: enable DFU for RAM 2015-09-11 17:15:26 -04:00
tegra-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
tegra20-common.h ARM: tegra: expand all SPL sizes to be consistent 2015-10-02 11:05:30 -07:00
tegra30-common.h ARM: tegra: expand all SPL sizes to be consistent 2015-10-02 11:05:30 -07:00
tegra114-common.h ARM: tegra: expand all SPL sizes to be consistent 2015-10-02 11:05:30 -07:00
tegra124-common.h ARM: tegra: move VPR configuration to a later stage 2015-08-06 10:50:03 -07:00
tegra210-common.h ARM: tegra: expand all SPL sizes to be consistent 2015-10-02 11:05:30 -07:00
thuban.h siemens,am33x,thuban: rename dxr2 to thuban 2015-06-19 16:46:50 -04:00
ti814x_evm.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
ti816x_evm.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
ti_am335x_common.h configs: split ti_armv7_common into a omap generic header 2015-07-27 15:02:17 -04:00
ti_armv7_common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
ti_armv7_keystone2.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
ti_armv7_omap.h configs: split ti_armv7_common into a omap generic header 2015-07-27 15:02:17 -04:00
ti_omap3_common.h ti: omap3: config: remove 1 from boolean define 2015-10-11 17:12:06 -04:00
ti_omap4_common.h ti_omap4_common.h: Switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL 2015-10-22 14:18:40 -04:00
ti_omap5_common.h ti_omap5_common: mmc: do not define DM_MMC for spl 2015-10-22 14:44:01 -04:00
titanium.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
tqma6.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
tqma6_mba6.h arm: mx6: tqma6: fix spelling error in condition 2015-06-01 09:54:52 +02:00
tqma6_wru4.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
trats.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
trats2.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
tricorder.h tricorder: switch to CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:59 +01:00
trimslice.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
ts4800.h ts4800: add CONFIG_OF_LIBFDT 2015-10-30 15:09:20 +01:00
tseries.h usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
tuxx1.h powerpc/83xx: add support for kmtepr2 board 2015-11-18 15:28:51 -05:00
twister.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
udoo.h udoo: Remove SPL fat support 2015-09-02 15:25:28 +02:00
uniphier.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
usb_a9263.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
usbarmory.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
v5fx30teval.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
v38b.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
vct.h cmd: Convert CONFIG_CMD_ELF to Kconfig 2015-10-21 07:46:25 -06:00
ve8313.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
venice2.h ARM: tegra: simplify GPU setup 2015-11-12 09:21:07 -07:00
ventana.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
vexpress_aemv8a.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
vexpress_ca5x2.h Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header 2015-08-12 12:08:20 -04:00
vexpress_ca9x4.h Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header 2015-08-12 12:08:20 -04:00
vexpress_ca15_tc2.h Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header 2015-08-12 12:08:20 -04:00
vexpress_common.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
vf610twr.h common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29 10:33:58 -07:00
vme8349.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
walnut.h
…
wandboard.h imx6: fix warnings due to switch to distro environment 2015-11-13 10:49:01 +01:00
warp.h I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02 10:42:31 +02:00
whistler.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
woodburn.h
…
woodburn_common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
woodburn_sd.h
…
work_92105.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
x86-chromebook.h x86: Remove CONFIG_SYS_EARLY_PCI_INIT 2015-11-13 06:46:26 -08:00
x86-common.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
x600.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
xfi3.h common: add CMD_GPIO to Kconfig 2015-11-18 14:50:06 -05:00
xilinx-ppc.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
xilinx-ppc405-generic.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
xilinx-ppc405.h
…
xilinx-ppc440-generic.h kconfig: add config option for shell prompt 2015-08-13 07:19:33 -04:00
xilinx-ppc440.h
…
xilinx_zynqmp.h zynq: sdhci: Define max clock by macro 2015-11-19 14:03:05 +01:00
xilinx_zynqmp_ep.h zynq: sdhci: Define max clock by macro 2015-11-19 14:03:05 +01:00
xpedite517x.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
xpedite520x.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
xpedite537x.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
xpedite550x.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
xpedite1000.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
yosemite.h
…
yucca.h
…
zmx25.h arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24 13:50:38 -04:00
zynq-common.h zynq: sdhci: Define max clock by macro 2015-11-19 14:03:05 +01:00
zynq_microzed.h arm: zynq: Move serial driver to driver model 2015-11-04 14:49:53 +01:00
zynq_picozed.h arm: zynq: Move serial driver to driver model 2015-11-04 14:49:53 +01:00
zynq_zc70x.h arm: zynq: Move serial driver to driver model 2015-11-04 14:49:53 +01:00
zynq_zc770.h arm: zynq: Move serial driver to driver model 2015-11-04 14:49:53 +01:00
zynq_zed.h arm: zynq: Move serial driver to driver model 2015-11-04 14:49:53 +01:00
zynq_zybo.h arm: zynq: Move serial driver to driver model 2015-11-04 14:49:53 +01:00