* Added an initial working implementation of the register readback and applied it to the LLCAN registers. Also fixed an init bug in CAN.
* Locally disable pylint import error
* Reverted change to CAN-obj->FA1R setting
* Fixed misra compliance
* Changed hash function name
* Fixed CAN filter setting
* Added voltage health test
* Converted ADC to register functions
* Converted clock to use register setters
* Added check to see if fault status is zero after running test
* Converted DAC to use register setters
* Converted fan to use register setters
* Converted gmlan bitbanging to use register setters
* Changed over interrupt driver to use register setters. Also moved some includes and definition places for critical sections
* Fixed build
* Converted LLGPIO to use register setters
* Converted pwm to use register setters
* Fixed cold boot
* Fixed health fault check in automated tests
* Added comment for the future (issue #367)
* Converted RTC driver to use register setters
* Converted SPI to use register setters
* Converted timer driver to use register setters
* Fixed register fault on white pandas and disabled showing of fault for release
* Bump version
* late usb
* Added type support for black panda
* Added harness presence and orientation detection
* harness relay driving code
* Added intercept support in black panda code. Switched around can0 and can2
* Disable ADCs after orientation detection. Ignition interrupts via harness
* WIP: Hardware abstraction layer + black panda bringup
* Fixed bootstub build
* Fixed bootstub for pedal
* Fixed infinite loops
* Got CAN buses working on white again
* Fixed pedal build and black can interfaces
* Got CAN buses working on black panda
* Finished loopback test for black panda
* Erase all flash sectors on the panda. Increased binary limit. Added extra python functions.
* Fixed python
* Made new code MISRA compliant
* Cleaned up ignition. Fixed build
* Fixed health packet
* Fixed CAN mode on black bug. Changed OBD to switch on ELM mode
* Fixes from Github review
* Fixed MISRA issue for pedal
* Fixed failing gmlan tests
* ELM327 safety: allow diagnostic on all buses
* Cleaned up EON relay code
* delete only 3 sectors instead of 11 to allow a new build to be flashed. Much faster to flash
* Removed CAN only can0 output mode. Does not make sense on black panda due to reversibility issues.
* Added heartbeat logic for EON code on panda. Go to NOOUTPUT if EON does not send a heartbeat for 5 seconds.
* Remove all CAN buses live on EON startup. Shouldn't be necessary to have this separate case
* Formatting
* Added file I forgot to push
* Added heartbeat to testing code to make sure EON tests don't fail. Should probably find a better way to do this though. Heartbeat thread didn't work, concurrent USB connection issues...
* Safety: support black panda for Honda Bosch
* Disable OBD2 if setting to NOOUTPUT mode
* Run safety tests for all hw_types
* Fail test if subtest fails
* fix safety tests
robbederks