350 lines
16 KiB
Python
350 lines
16 KiB
Python
from cereal import car
|
|
from collections import defaultdict
|
|
from common.numpy_fast import interp
|
|
from opendbc.can.can_define import CANDefine
|
|
from opendbc.can.parser import CANParser
|
|
from selfdrive.config import Conversions as CV
|
|
from selfdrive.car.interfaces import CarStateBase
|
|
from selfdrive.car.honda.values import CAR, DBC, STEER_THRESHOLD, SPEED_FACTOR, HONDA_BOSCH
|
|
|
|
def calc_cruise_offset(offset, speed):
|
|
# euristic formula so that speed is controlled to ~ 0.3m/s below pid_speed
|
|
# constraints to solve for _K0, _K1, _K2 are:
|
|
# - speed = 0m/s, out = -0.3
|
|
# - speed = 34m/s, offset = 20, out = -0.25
|
|
# - speed = 34m/s, offset = -2.5, out = -1.8
|
|
_K0 = -0.3
|
|
_K1 = -0.01879
|
|
_K2 = 0.01013
|
|
return min(_K0 + _K1 * speed + _K2 * speed * offset, 0.)
|
|
|
|
|
|
def get_can_signals(CP):
|
|
# this function generates lists for signal, messages and initial values
|
|
signals = [
|
|
("XMISSION_SPEED", "ENGINE_DATA", 0),
|
|
("WHEEL_SPEED_FL", "WHEEL_SPEEDS", 0),
|
|
("WHEEL_SPEED_FR", "WHEEL_SPEEDS", 0),
|
|
("WHEEL_SPEED_RL", "WHEEL_SPEEDS", 0),
|
|
("WHEEL_SPEED_RR", "WHEEL_SPEEDS", 0),
|
|
("STEER_ANGLE", "STEERING_SENSORS", 0),
|
|
("STEER_ANGLE_RATE", "STEERING_SENSORS", 0),
|
|
("MOTOR_TORQUE", "STEER_MOTOR_TORQUE", 0),
|
|
("STEER_TORQUE_SENSOR", "STEER_STATUS", 0),
|
|
("LEFT_BLINKER", "SCM_FEEDBACK", 0),
|
|
("RIGHT_BLINKER", "SCM_FEEDBACK", 0),
|
|
("GEAR", "GEARBOX", 0),
|
|
("SEATBELT_DRIVER_LAMP", "SEATBELT_STATUS", 1),
|
|
("SEATBELT_DRIVER_LATCHED", "SEATBELT_STATUS", 0),
|
|
("BRAKE_PRESSED", "POWERTRAIN_DATA", 0),
|
|
("BRAKE_SWITCH", "POWERTRAIN_DATA", 0),
|
|
("CRUISE_BUTTONS", "SCM_BUTTONS", 0),
|
|
("ESP_DISABLED", "VSA_STATUS", 1),
|
|
("USER_BRAKE", "VSA_STATUS", 0),
|
|
("BRAKE_HOLD_ACTIVE", "VSA_STATUS", 0),
|
|
("STEER_STATUS", "STEER_STATUS", 5),
|
|
("GEAR_SHIFTER", "GEARBOX", 0),
|
|
("PEDAL_GAS", "POWERTRAIN_DATA", 0),
|
|
("CRUISE_SETTING", "SCM_BUTTONS", 0),
|
|
("ACC_STATUS", "POWERTRAIN_DATA", 0),
|
|
]
|
|
|
|
checks = [
|
|
("ENGINE_DATA", 100),
|
|
("WHEEL_SPEEDS", 50),
|
|
("STEERING_SENSORS", 100),
|
|
("SEATBELT_STATUS", 10),
|
|
("CRUISE", 10),
|
|
("POWERTRAIN_DATA", 100),
|
|
("VSA_STATUS", 50),
|
|
]
|
|
|
|
if CP.carFingerprint == CAR.ODYSSEY_CHN:
|
|
checks += [
|
|
("SCM_FEEDBACK", 25),
|
|
("SCM_BUTTONS", 50),
|
|
]
|
|
else:
|
|
checks += [
|
|
("SCM_FEEDBACK", 10),
|
|
("SCM_BUTTONS", 25),
|
|
]
|
|
|
|
if CP.carFingerprint in (CAR.CRV_HYBRID, CAR.CIVIC_BOSCH_DIESEL):
|
|
checks += [
|
|
("GEARBOX", 50),
|
|
]
|
|
else:
|
|
checks += [
|
|
("GEARBOX", 100),
|
|
]
|
|
|
|
if CP.radarOffCan:
|
|
# Civic is only bosch to use the same brake message as other hondas.
|
|
if CP.carFingerprint not in (CAR.ACCORDH, CAR.CIVIC_BOSCH, CAR.CIVIC_BOSCH_DIESEL, CAR.CRV_HYBRID, CAR.INSIGHT):
|
|
signals += [("BRAKE_PRESSED", "BRAKE_MODULE", 0)]
|
|
checks += [("BRAKE_MODULE", 50)]
|
|
signals += [("CAR_GAS", "GAS_PEDAL_2", 0),
|
|
("MAIN_ON", "SCM_FEEDBACK", 0),
|
|
("CRUISE_CONTROL_LABEL", "ACC_HUD", 0),
|
|
("EPB_STATE", "EPB_STATUS", 0),
|
|
("CRUISE_SPEED", "ACC_HUD", 0)]
|
|
checks += [("GAS_PEDAL_2", 100)]
|
|
else:
|
|
# Nidec signals.
|
|
signals += [("BRAKE_ERROR_1", "STANDSTILL", 1),
|
|
("BRAKE_ERROR_2", "STANDSTILL", 1),
|
|
("CRUISE_SPEED_PCM", "CRUISE", 0),
|
|
("CRUISE_SPEED_OFFSET", "CRUISE_PARAMS", 0)]
|
|
checks += [("STANDSTILL", 50)]
|
|
|
|
if CP.carFingerprint == CAR.ODYSSEY_CHN:
|
|
checks += [("CRUISE_PARAMS", 10)]
|
|
else:
|
|
checks += [("CRUISE_PARAMS", 50)]
|
|
|
|
if CP.carFingerprint in (CAR.ACCORD, CAR.ACCORD_15, CAR.ACCORDH, CAR.CIVIC_BOSCH, CAR.CIVIC_BOSCH_DIESEL, CAR.CRV_HYBRID, CAR.INSIGHT):
|
|
signals += [("DRIVERS_DOOR_OPEN", "SCM_FEEDBACK", 1)]
|
|
elif CP.carFingerprint == CAR.ODYSSEY_CHN:
|
|
signals += [("DRIVERS_DOOR_OPEN", "SCM_BUTTONS", 1)]
|
|
elif CP.carFingerprint == CAR.HRV:
|
|
signals += [("DRIVERS_DOOR_OPEN", "SCM_BUTTONS", 1),
|
|
("WHEELS_MOVING", "STANDSTILL", 1)]
|
|
else:
|
|
signals += [("DOOR_OPEN_FL", "DOORS_STATUS", 1),
|
|
("DOOR_OPEN_FR", "DOORS_STATUS", 1),
|
|
("DOOR_OPEN_RL", "DOORS_STATUS", 1),
|
|
("DOOR_OPEN_RR", "DOORS_STATUS", 1),
|
|
("WHEELS_MOVING", "STANDSTILL", 1)]
|
|
checks += [("DOORS_STATUS", 3)]
|
|
|
|
if CP.carFingerprint == CAR.CIVIC:
|
|
signals += [("CAR_GAS", "GAS_PEDAL_2", 0),
|
|
("MAIN_ON", "SCM_FEEDBACK", 0),
|
|
("IMPERIAL_UNIT", "HUD_SETTING", 0),
|
|
("EPB_STATE", "EPB_STATUS", 0)]
|
|
elif CP.carFingerprint == CAR.ACURA_ILX:
|
|
signals += [("CAR_GAS", "GAS_PEDAL_2", 0),
|
|
("MAIN_ON", "SCM_BUTTONS", 0)]
|
|
elif CP.carFingerprint in (CAR.CRV, CAR.CRV_EU, CAR.ACURA_RDX, CAR.PILOT_2019, CAR.RIDGELINE):
|
|
signals += [("MAIN_ON", "SCM_BUTTONS", 0)]
|
|
elif CP.carFingerprint in (CAR.FIT, CAR.HRV):
|
|
signals += [("CAR_GAS", "GAS_PEDAL_2", 0),
|
|
("MAIN_ON", "SCM_BUTTONS", 0),
|
|
("BRAKE_HOLD_ACTIVE", "VSA_STATUS", 0)]
|
|
elif CP.carFingerprint == CAR.ODYSSEY:
|
|
signals += [("MAIN_ON", "SCM_FEEDBACK", 0),
|
|
("EPB_STATE", "EPB_STATUS", 0)]
|
|
checks += [("EPB_STATUS", 50)]
|
|
elif CP.carFingerprint == CAR.PILOT:
|
|
signals += [("MAIN_ON", "SCM_BUTTONS", 0),
|
|
("CAR_GAS", "GAS_PEDAL_2", 0)]
|
|
elif CP.carFingerprint == CAR.ODYSSEY_CHN:
|
|
signals += [("MAIN_ON", "SCM_BUTTONS", 0),
|
|
("EPB_STATE", "EPB_STATUS", 0)]
|
|
checks += [("EPB_STATUS", 50)]
|
|
|
|
# add gas interceptor reading if we are using it
|
|
if CP.enableGasInterceptor:
|
|
signals.append(("INTERCEPTOR_GAS", "GAS_SENSOR", 0))
|
|
signals.append(("INTERCEPTOR_GAS2", "GAS_SENSOR", 0))
|
|
checks.append(("GAS_SENSOR", 50))
|
|
|
|
return signals, checks
|
|
|
|
|
|
class CarState(CarStateBase):
|
|
def __init__(self, CP):
|
|
super().__init__(CP)
|
|
can_define = CANDefine(DBC[CP.carFingerprint]['pt'])
|
|
self.shifter_values = can_define.dv["GEARBOX"]["GEAR_SHIFTER"]
|
|
self.steer_status_values = defaultdict(lambda: "UNKNOWN", can_define.dv["STEER_STATUS"]["STEER_STATUS"])
|
|
|
|
self.user_gas, self.user_gas_pressed = 0., 0
|
|
self.brake_switch_prev = 0
|
|
self.brake_switch_ts = 0
|
|
self.cruise_setting = 0
|
|
self.v_cruise_pcm_prev = 0
|
|
self.cruise_mode = 0
|
|
|
|
def update(self, cp, cp_cam):
|
|
ret = car.CarState.new_message()
|
|
|
|
# car params
|
|
v_weight_v = [0., 1.] # don't trust smooth speed at low values to avoid premature zero snapping
|
|
v_weight_bp = [1., 6.] # smooth blending, below ~0.6m/s the smooth speed snaps to zero
|
|
|
|
# update prevs, update must run once per loop
|
|
self.prev_cruise_buttons = self.cruise_buttons
|
|
self.prev_cruise_setting = self.cruise_setting
|
|
|
|
# ******************* parse out can *******************
|
|
if self.CP.carFingerprint in (CAR.ACCORD, CAR.ACCORD_15, CAR.ACCORDH, CAR.CIVIC_BOSCH, CAR.CIVIC_BOSCH_DIESEL, CAR.CRV_HYBRID, CAR.INSIGHT): # TODO: find wheels moving bit in dbc
|
|
ret.standstill = cp.vl["ENGINE_DATA"]['XMISSION_SPEED'] < 0.1
|
|
ret.doorOpen = bool(cp.vl["SCM_FEEDBACK"]['DRIVERS_DOOR_OPEN'])
|
|
elif self.CP.carFingerprint == CAR.ODYSSEY_CHN:
|
|
ret.standstill = cp.vl["ENGINE_DATA"]['XMISSION_SPEED'] < 0.1
|
|
ret.doorOpen = bool(cp.vl["SCM_BUTTONS"]['DRIVERS_DOOR_OPEN'])
|
|
elif self.CP.carFingerprint == CAR.HRV:
|
|
ret.doorOpen = bool(cp.vl["SCM_BUTTONS"]['DRIVERS_DOOR_OPEN'])
|
|
else:
|
|
ret.standstill = not cp.vl["STANDSTILL"]['WHEELS_MOVING']
|
|
ret.doorOpen = any([cp.vl["DOORS_STATUS"]['DOOR_OPEN_FL'], cp.vl["DOORS_STATUS"]['DOOR_OPEN_FR'],
|
|
cp.vl["DOORS_STATUS"]['DOOR_OPEN_RL'], cp.vl["DOORS_STATUS"]['DOOR_OPEN_RR']])
|
|
ret.seatbeltUnlatched = bool(cp.vl["SEATBELT_STATUS"]['SEATBELT_DRIVER_LAMP'] or not cp.vl["SEATBELT_STATUS"]['SEATBELT_DRIVER_LATCHED'])
|
|
|
|
steer_status = self.steer_status_values[cp.vl["STEER_STATUS"]['STEER_STATUS']]
|
|
ret.steerError = steer_status not in ['NORMAL', 'NO_TORQUE_ALERT_1', 'NO_TORQUE_ALERT_2', 'LOW_SPEED_LOCKOUT', 'TMP_FAULT']
|
|
# NO_TORQUE_ALERT_2 can be caused by bump OR steering nudge from driver
|
|
self.steer_not_allowed = steer_status not in ['NORMAL', 'NO_TORQUE_ALERT_2']
|
|
# LOW_SPEED_LOCKOUT is not worth a warning
|
|
ret.steerWarning = steer_status not in ['NORMAL', 'LOW_SPEED_LOCKOUT', 'NO_TORQUE_ALERT_2']
|
|
|
|
if self.CP.radarOffCan:
|
|
self.brake_error = 0
|
|
else:
|
|
self.brake_error = cp.vl["STANDSTILL"]['BRAKE_ERROR_1'] or cp.vl["STANDSTILL"]['BRAKE_ERROR_2']
|
|
ret.espDisabled = cp.vl["VSA_STATUS"]['ESP_DISABLED'] != 0
|
|
|
|
speed_factor = SPEED_FACTOR[self.CP.carFingerprint]
|
|
ret.wheelSpeeds.fl = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_FL'] * CV.KPH_TO_MS * speed_factor
|
|
ret.wheelSpeeds.fr = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_FR'] * CV.KPH_TO_MS * speed_factor
|
|
ret.wheelSpeeds.rl = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_RL'] * CV.KPH_TO_MS * speed_factor
|
|
ret.wheelSpeeds.rr = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_RR'] * CV.KPH_TO_MS * speed_factor
|
|
v_wheel = (ret.wheelSpeeds.fl + ret.wheelSpeeds.fr + ret.wheelSpeeds.rl + ret.wheelSpeeds.rr)/4.
|
|
|
|
# blend in transmission speed at low speed, since it has more low speed accuracy
|
|
v_weight = interp(v_wheel, v_weight_bp, v_weight_v)
|
|
ret.vEgoRaw = (1. - v_weight) * cp.vl["ENGINE_DATA"]['XMISSION_SPEED'] * CV.KPH_TO_MS * speed_factor + v_weight * v_wheel
|
|
ret.vEgo, ret.aEgo = self.update_speed_kf(ret.vEgoRaw)
|
|
|
|
ret.steeringAngle = cp.vl["STEERING_SENSORS"]['STEER_ANGLE']
|
|
ret.steeringRate = cp.vl["STEERING_SENSORS"]['STEER_ANGLE_RATE']
|
|
|
|
self.cruise_setting = cp.vl["SCM_BUTTONS"]['CRUISE_SETTING']
|
|
self.cruise_buttons = cp.vl["SCM_BUTTONS"]['CRUISE_BUTTONS']
|
|
|
|
ret.leftBlinker = cp.vl["SCM_FEEDBACK"]['LEFT_BLINKER'] != 0
|
|
ret.rightBlinker = cp.vl["SCM_FEEDBACK"]['RIGHT_BLINKER'] != 0
|
|
self.brake_hold = cp.vl["VSA_STATUS"]['BRAKE_HOLD_ACTIVE']
|
|
|
|
if self.CP.carFingerprint in (CAR.CIVIC, CAR.ODYSSEY, CAR.CRV_5G, CAR.ACCORD, CAR.ACCORD_15, CAR.ACCORDH, CAR.CIVIC_BOSCH, CAR.CIVIC_BOSCH_DIESEL, CAR.CRV_HYBRID, CAR.INSIGHT):
|
|
self.park_brake = cp.vl["EPB_STATUS"]['EPB_STATE'] != 0
|
|
main_on = cp.vl["SCM_FEEDBACK"]['MAIN_ON']
|
|
elif self.CP.carFingerprint == CAR.ODYSSEY_CHN:
|
|
self.park_brake = cp.vl["EPB_STATUS"]['EPB_STATE'] != 0
|
|
main_on = cp.vl["SCM_BUTTONS"]['MAIN_ON']
|
|
else:
|
|
self.park_brake = 0 # TODO
|
|
main_on = cp.vl["SCM_BUTTONS"]['MAIN_ON']
|
|
|
|
gear = int(cp.vl["GEARBOX"]['GEAR_SHIFTER'])
|
|
ret.gearShifter = self.parse_gear_shifter(self.shifter_values.get(gear, None))
|
|
|
|
self.pedal_gas = cp.vl["POWERTRAIN_DATA"]['PEDAL_GAS']
|
|
# crv doesn't include cruise control
|
|
if self.CP.carFingerprint in (CAR.CRV, CAR.CRV_EU, CAR.ODYSSEY, CAR.ACURA_RDX, CAR.RIDGELINE, CAR.PILOT_2019, CAR.ODYSSEY_CHN):
|
|
ret.gas = self.pedal_gas / 256.
|
|
else:
|
|
ret.gas = cp.vl["GAS_PEDAL_2"]['CAR_GAS'] / 256.
|
|
|
|
# this is a hack for the interceptor. This is now only used in the simulation
|
|
# TODO: Replace tests by toyota so this can go away
|
|
if self.CP.enableGasInterceptor:
|
|
self.user_gas = (cp.vl["GAS_SENSOR"]['INTERCEPTOR_GAS'] + cp.vl["GAS_SENSOR"]['INTERCEPTOR_GAS2']) / 2.
|
|
self.user_gas_pressed = self.user_gas > 1e-5 # this works because interceptor read < 0 when pedal position is 0. Once calibrated, this will change
|
|
ret.gasPressed = self.user_gas_pressed
|
|
else:
|
|
ret.gasPressed = self.pedal_gas > 1e-5
|
|
|
|
ret.steeringTorque = cp.vl["STEER_STATUS"]['STEER_TORQUE_SENSOR']
|
|
ret.steeringTorqueEps = cp.vl["STEER_MOTOR_TORQUE"]['MOTOR_TORQUE']
|
|
ret.steeringPressed = abs(ret.steeringTorque) > STEER_THRESHOLD[self.CP.carFingerprint]
|
|
|
|
self.brake_switch = cp.vl["POWERTRAIN_DATA"]['BRAKE_SWITCH'] != 0
|
|
|
|
if self.CP.radarOffCan:
|
|
self.cruise_mode = cp.vl["ACC_HUD"]['CRUISE_CONTROL_LABEL']
|
|
ret.cruiseState.standstill = cp.vl["ACC_HUD"]['CRUISE_SPEED'] == 252.
|
|
ret.cruiseState.speedOffset = calc_cruise_offset(0, ret.vEgo)
|
|
if self.CP.carFingerprint in (CAR.CIVIC_BOSCH, CAR.CIVIC_BOSCH_DIESEL, CAR.ACCORDH, CAR.CRV_HYBRID, CAR.INSIGHT):
|
|
ret.brakePressed = cp.vl["POWERTRAIN_DATA"]['BRAKE_PRESSED'] != 0 or \
|
|
(self.brake_switch and self.brake_switch_prev and \
|
|
cp.ts["POWERTRAIN_DATA"]['BRAKE_SWITCH'] != self.brake_switch_ts)
|
|
self.brake_switch_prev = self.brake_switch
|
|
self.brake_switch_ts = cp.ts["POWERTRAIN_DATA"]['BRAKE_SWITCH']
|
|
else:
|
|
ret.brakePressed = cp.vl["BRAKE_MODULE"]['BRAKE_PRESSED'] != 0
|
|
# On set, cruise set speed pulses between 254~255 and the set speed prev is set to avoid this.
|
|
ret.cruiseState.speed = self.v_cruise_pcm_prev if cp.vl["ACC_HUD"]['CRUISE_SPEED'] > 160.0 else cp.vl["ACC_HUD"]['CRUISE_SPEED'] * CV.KPH_TO_MS
|
|
self.v_cruise_pcm_prev = ret.cruiseState.speed
|
|
else:
|
|
ret.cruiseState.speedOffset = calc_cruise_offset(cp.vl["CRUISE_PARAMS"]['CRUISE_SPEED_OFFSET'], ret.vEgo)
|
|
ret.cruiseState.speed = cp.vl["CRUISE"]['CRUISE_SPEED_PCM'] * CV.KPH_TO_MS
|
|
# brake switch has shown some single time step noise, so only considered when
|
|
# switch is on for at least 2 consecutive CAN samples
|
|
ret.brakePressed = bool(cp.vl["POWERTRAIN_DATA"]['BRAKE_PRESSED'] or
|
|
(self.brake_switch and self.brake_switch_prev and
|
|
cp.ts["POWERTRAIN_DATA"]['BRAKE_SWITCH'] != self.brake_switch_ts))
|
|
self.brake_switch_prev = self.brake_switch
|
|
self.brake_switch_ts = cp.ts["POWERTRAIN_DATA"]['BRAKE_SWITCH']
|
|
|
|
ret.brake = cp.vl["VSA_STATUS"]['USER_BRAKE']
|
|
ret.cruiseState.enabled = cp.vl["POWERTRAIN_DATA"]['ACC_STATUS'] != 0
|
|
ret.cruiseState.available = bool(main_on) and self.cruise_mode == 0
|
|
|
|
# Gets rid of Pedal Grinding noise when brake is pressed at slow speeds for some models
|
|
if self.CP.carFingerprint in (CAR.PILOT, CAR.PILOT_2019, CAR.RIDGELINE):
|
|
if ret.brake > 0.05:
|
|
ret.brakePressed = True
|
|
|
|
# TODO: discover the CAN msg that has the imperial unit bit for all other cars
|
|
self.is_metric = not cp.vl["HUD_SETTING"]['IMPERIAL_UNIT'] if self.CP.carFingerprint in (CAR.CIVIC) else False
|
|
|
|
if self.CP.carFingerprint in HONDA_BOSCH:
|
|
ret.stockAeb = bool(cp_cam.vl["ACC_CONTROL"]["AEB_STATUS"] and cp_cam.vl["ACC_CONTROL"]["ACCEL_COMMAND"] < -1e-5)
|
|
else:
|
|
ret.stockAeb = bool(cp_cam.vl["BRAKE_COMMAND"]["AEB_REQ_1"] and cp_cam.vl["BRAKE_COMMAND"]["COMPUTER_BRAKE"] > 1e-5)
|
|
|
|
if self.CP.carFingerprint in HONDA_BOSCH:
|
|
self.stock_hud = False
|
|
ret.stockFcw = False
|
|
else:
|
|
ret.stockFcw = cp_cam.vl["BRAKE_COMMAND"]["FCW"] != 0
|
|
self.stock_hud = cp_cam.vl["ACC_HUD"]
|
|
self.stock_brake = cp_cam.vl["BRAKE_COMMAND"]
|
|
|
|
return ret
|
|
|
|
@staticmethod
|
|
def get_can_parser(CP):
|
|
signals, checks = get_can_signals(CP)
|
|
bus_pt = 1 if CP.isPandaBlack and CP.carFingerprint in HONDA_BOSCH else 0
|
|
return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, bus_pt)
|
|
|
|
@staticmethod
|
|
def get_cam_can_parser(CP):
|
|
signals = []
|
|
|
|
if CP.carFingerprint in HONDA_BOSCH:
|
|
signals += [("ACCEL_COMMAND", "ACC_CONTROL", 0),
|
|
("AEB_STATUS", "ACC_CONTROL", 0)]
|
|
else:
|
|
signals += [("COMPUTER_BRAKE", "BRAKE_COMMAND", 0),
|
|
("AEB_REQ_1", "BRAKE_COMMAND", 0),
|
|
("FCW", "BRAKE_COMMAND", 0),
|
|
("CHIME", "BRAKE_COMMAND", 0),
|
|
("FCM_OFF", "ACC_HUD", 0),
|
|
("FCM_OFF_2", "ACC_HUD", 0),
|
|
("FCM_PROBLEM", "ACC_HUD", 0),
|
|
("ICONS", "ACC_HUD", 0)]
|
|
|
|
|
|
# all hondas except CRV, RDX and 2019 Odyssey@China use 0xe4 for steering
|
|
checks = [(0xe4, 100)]
|
|
if CP.carFingerprint in [CAR.CRV, CAR.CRV_EU, CAR.ACURA_RDX, CAR.ODYSSEY_CHN]:
|
|
checks = [(0x194, 100)]
|
|
|
|
bus_cam = 1 if CP.carFingerprint in HONDA_BOSCH and not CP.isPandaBlack else 2
|
|
return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, bus_cam)
|