alistair23-linux/arch/x86/include/asm/cpufeature.h

604 lines
27 KiB
C
Raw Normal View History

/*
* Defines x86 CPU feature bits
*/
#ifndef _ASM_X86_CPUFEATURE_H
#define _ASM_X86_CPUFEATURE_H
#ifndef _ASM_X86_REQUIRED_FEATURES_H
#include <asm/required-features.h>
#endif
x86: Introduce disabled-features I believe the REQUIRED_MASK aproach was taken so that it was easier to consult in assembly (arch/x86/kernel/verify_cpu.S). DISABLED_MASK does not have the same restriction, but I implemented it the same way for consistency. We have a REQUIRED_MASK... which does two things: 1. Keeps a list of cpuid bits to check in very early boot and refuse to boot if those are not present. 2. Consulted during cpu_has() checks, which allows us to optimize out things at compile-time. In other words, if we *KNOW* we will not boot with the feature off, then we can safely assume that it will be present forever. But, we don't have a similar mechanism for CPU features which may be present but that we know we will not use. We simply use our existing mechanisms to repeatedly check the status of the bit at runtime (well, the alternatives patching helps here but it does not provide compile-time optimization). Adding a feature to disabled-features.h allows the bit to be checked via a new macro: cpu_feature_enabled(). Note that for features in DISABLED_MASK, checks with this macro have all of the benefits of an #ifdef. Before, we would have done this in a header: #ifdef CONFIG_X86_INTEL_MPX #define cpu_has_mpx cpu_has(X86_FEATURE_MPX) #else #define cpu_has_mpx 0 #endif and this in the code: if (cpu_has_mpx) do_some_mpx_thing(); Now, just add your feature to DISABLED_MASK and you can do this everywhere, and get the same benefits you would have from #ifdefs: if (cpu_feature_enabled(X86_FEATURE_MPX)) do_some_mpx_thing(); We need a new function and *not* a modification to cpu_has() because there are cases where we actually need to check the CPU itself, despite what features the kernel supports. The best example of this is a hypervisor which has no control over what features its guests are using and where the guest does not depend on the host for support. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: http://lkml.kernel.org/r/20140911211513.9E35E931@viggo.jf.intel.com Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-09-11 15:15:13 -06:00
#ifndef _ASM_X86_DISABLED_FEATURES_H
#include <asm/disabled-features.h>
#endif
x86: Add support for Intel Cache QoS Monitoring (CQM) detection This patch adds support for the new Cache QoS Monitoring (CQM) feature found in future Intel Xeon processors. It includes the new values to track CQM resources to the cpuinfo_x86 structure, plus the CPUID detection routines for CQM. CQM allows a process, or set of processes, to be tracked by the CPU to determine the cache usage of that task group. Using this data from the CPU, software can be written to extract this data and report cache usage and occupancy for a particular process, or group of processes. More information about Cache QoS Monitoring can be found in the Intel (R) x86 Architecture Software Developer Manual, section 17.14. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Chris Webb <chris@arachsys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Honeyman <stevenhoneyman@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Link: http://lkml.kernel.org/r/1422038748-21397-5-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-23 11:45:43 -07:00
#define NCAPINTS 13 /* N 32-bit words worth of info */
#define NBUGINTS 1 /* N 32-bit bug flags */
/*
* Note: If the comment begins with a quoted string, that string is used
* in /proc/cpuinfo instead of the macro name. If the string is "",
* this feature bit is not displayed in /proc/cpuinfo at all.
*/
/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
#define X86_FEATURE_FPU ( 0*32+ 0) /* Onboard FPU */
#define X86_FEATURE_VME ( 0*32+ 1) /* Virtual Mode Extensions */
#define X86_FEATURE_DE ( 0*32+ 2) /* Debugging Extensions */
#define X86_FEATURE_PSE ( 0*32+ 3) /* Page Size Extensions */
#define X86_FEATURE_TSC ( 0*32+ 4) /* Time Stamp Counter */
#define X86_FEATURE_MSR ( 0*32+ 5) /* Model-Specific Registers */
#define X86_FEATURE_PAE ( 0*32+ 6) /* Physical Address Extensions */
#define X86_FEATURE_MCE ( 0*32+ 7) /* Machine Check Exception */
#define X86_FEATURE_CX8 ( 0*32+ 8) /* CMPXCHG8 instruction */
#define X86_FEATURE_APIC ( 0*32+ 9) /* Onboard APIC */
#define X86_FEATURE_SEP ( 0*32+11) /* SYSENTER/SYSEXIT */
#define X86_FEATURE_MTRR ( 0*32+12) /* Memory Type Range Registers */
#define X86_FEATURE_PGE ( 0*32+13) /* Page Global Enable */
#define X86_FEATURE_MCA ( 0*32+14) /* Machine Check Architecture */
#define X86_FEATURE_CMOV ( 0*32+15) /* CMOV instructions */
/* (plus FCMOVcc, FCOMI with FPU) */
#define X86_FEATURE_PAT ( 0*32+16) /* Page Attribute Table */
#define X86_FEATURE_PSE36 ( 0*32+17) /* 36-bit PSEs */
#define X86_FEATURE_PN ( 0*32+18) /* Processor serial number */
#define X86_FEATURE_CLFLUSH ( 0*32+19) /* CLFLUSH instruction */
#define X86_FEATURE_DS ( 0*32+21) /* "dts" Debug Store */
#define X86_FEATURE_ACPI ( 0*32+22) /* ACPI via MSR */
#define X86_FEATURE_MMX ( 0*32+23) /* Multimedia Extensions */
#define X86_FEATURE_FXSR ( 0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
#define X86_FEATURE_XMM ( 0*32+25) /* "sse" */
#define X86_FEATURE_XMM2 ( 0*32+26) /* "sse2" */
#define X86_FEATURE_SELFSNOOP ( 0*32+27) /* "ss" CPU self snoop */
#define X86_FEATURE_HT ( 0*32+28) /* Hyper-Threading */
#define X86_FEATURE_ACC ( 0*32+29) /* "tm" Automatic clock control */
#define X86_FEATURE_IA64 ( 0*32+30) /* IA-64 processor */
#define X86_FEATURE_PBE ( 0*32+31) /* Pending Break Enable */
/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
/* Don't duplicate feature flags which are redundant with Intel! */
#define X86_FEATURE_SYSCALL ( 1*32+11) /* SYSCALL/SYSRET */
#define X86_FEATURE_MP ( 1*32+19) /* MP Capable. */
#define X86_FEATURE_NX ( 1*32+20) /* Execute Disable */
#define X86_FEATURE_MMXEXT ( 1*32+22) /* AMD MMX extensions */
#define X86_FEATURE_FXSR_OPT ( 1*32+25) /* FXSAVE/FXRSTOR optimizations */
#define X86_FEATURE_GBPAGES ( 1*32+26) /* "pdpe1gb" GB pages */
#define X86_FEATURE_RDTSCP ( 1*32+27) /* RDTSCP */
#define X86_FEATURE_LM ( 1*32+29) /* Long Mode (x86-64) */
#define X86_FEATURE_3DNOWEXT ( 1*32+30) /* AMD 3DNow! extensions */
#define X86_FEATURE_3DNOW ( 1*32+31) /* 3DNow! */
/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
#define X86_FEATURE_RECOVERY ( 2*32+ 0) /* CPU in recovery mode */
#define X86_FEATURE_LONGRUN ( 2*32+ 1) /* Longrun power control */
#define X86_FEATURE_LRTI ( 2*32+ 3) /* LongRun table interface */
/* Other features, Linux-defined mapping, word 3 */
/* This range is used for feature bits which conflict or are synthesized */
#define X86_FEATURE_CXMMX ( 3*32+ 0) /* Cyrix MMX extensions */
#define X86_FEATURE_K6_MTRR ( 3*32+ 1) /* AMD K6 nonstandard MTRRs */
#define X86_FEATURE_CYRIX_ARR ( 3*32+ 2) /* Cyrix ARRs (= MTRRs) */
#define X86_FEATURE_CENTAUR_MCR ( 3*32+ 3) /* Centaur MCRs (= MTRRs) */
/* cpu types for specific tunings: */
#define X86_FEATURE_K8 ( 3*32+ 4) /* "" Opteron, Athlon64 */
#define X86_FEATURE_K7 ( 3*32+ 5) /* "" Athlon */
#define X86_FEATURE_P3 ( 3*32+ 6) /* "" P3 */
#define X86_FEATURE_P4 ( 3*32+ 7) /* "" P4 */
#define X86_FEATURE_CONSTANT_TSC ( 3*32+ 8) /* TSC ticks at a constant rate */
#define X86_FEATURE_UP ( 3*32+ 9) /* smp kernel running on up */
/* free, was #define X86_FEATURE_FXSAVE_LEAK ( 3*32+10) * "" FXSAVE leaks FOP/FIP/FOP */
#define X86_FEATURE_ARCH_PERFMON ( 3*32+11) /* Intel Architectural PerfMon */
#define X86_FEATURE_PEBS ( 3*32+12) /* Precise-Event Based Sampling */
#define X86_FEATURE_BTS ( 3*32+13) /* Branch Trace Store */
#define X86_FEATURE_SYSCALL32 ( 3*32+14) /* "" syscall in ia32 userspace */
#define X86_FEATURE_SYSENTER32 ( 3*32+15) /* "" sysenter in ia32 userspace */
#define X86_FEATURE_REP_GOOD ( 3*32+16) /* rep microcode works well */
#define X86_FEATURE_MFENCE_RDTSC ( 3*32+17) /* "" Mfence synchronizes RDTSC */
#define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) /* "" Lfence synchronizes RDTSC */
/* free, was #define X86_FEATURE_11AP ( 3*32+19) * "" Bad local APIC aka 11AP */
#define X86_FEATURE_NOPL ( 3*32+20) /* The NOPL (0F 1F) instructions */
#define X86_FEATURE_ALWAYS ( 3*32+21) /* "" Always-present feature */
#define X86_FEATURE_XTOPOLOGY ( 3*32+22) /* cpu topology enum extensions */
#define X86_FEATURE_TSC_RELIABLE ( 3*32+23) /* TSC is known to be reliable */
#define X86_FEATURE_NONSTOP_TSC ( 3*32+24) /* TSC does not stop in C states */
/* free, was #define X86_FEATURE_CLFLUSH_MONITOR ( 3*32+25) * "" clflush reqd with monitor */
#define X86_FEATURE_EXTD_APICID ( 3*32+26) /* has extended APICID (8 bits) */
#define X86_FEATURE_AMD_DCM ( 3*32+27) /* multi-node processor */
#define X86_FEATURE_APERFMPERF ( 3*32+28) /* APERFMPERF */
#define X86_FEATURE_EAGER_FPU ( 3*32+29) /* "eagerfpu" Non lazy FPU restore */
#define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 ( 4*32+ 0) /* "pni" SSE-3 */
#define X86_FEATURE_PCLMULQDQ ( 4*32+ 1) /* PCLMULQDQ instruction */
#define X86_FEATURE_DTES64 ( 4*32+ 2) /* 64-bit Debug Store */
#define X86_FEATURE_MWAIT ( 4*32+ 3) /* "monitor" Monitor/Mwait support */
#define X86_FEATURE_DSCPL ( 4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
#define X86_FEATURE_VMX ( 4*32+ 5) /* Hardware virtualization */
#define X86_FEATURE_SMX ( 4*32+ 6) /* Safer mode */
#define X86_FEATURE_EST ( 4*32+ 7) /* Enhanced SpeedStep */
#define X86_FEATURE_TM2 ( 4*32+ 8) /* Thermal Monitor 2 */
#define X86_FEATURE_SSSE3 ( 4*32+ 9) /* Supplemental SSE-3 */
#define X86_FEATURE_CID ( 4*32+10) /* Context ID */
#define X86_FEATURE_FMA ( 4*32+12) /* Fused multiply-add */
#define X86_FEATURE_CX16 ( 4*32+13) /* CMPXCHG16B */
#define X86_FEATURE_XTPR ( 4*32+14) /* Send Task Priority Messages */
#define X86_FEATURE_PDCM ( 4*32+15) /* Performance Capabilities */
#define X86_FEATURE_PCID ( 4*32+17) /* Process Context Identifiers */
#define X86_FEATURE_DCA ( 4*32+18) /* Direct Cache Access */
#define X86_FEATURE_XMM4_1 ( 4*32+19) /* "sse4_1" SSE-4.1 */
#define X86_FEATURE_XMM4_2 ( 4*32+20) /* "sse4_2" SSE-4.2 */
#define X86_FEATURE_X2APIC ( 4*32+21) /* x2APIC */
#define X86_FEATURE_MOVBE ( 4*32+22) /* MOVBE instruction */
#define X86_FEATURE_POPCNT ( 4*32+23) /* POPCNT instruction */
#define X86_FEATURE_TSC_DEADLINE_TIMER ( 4*32+24) /* Tsc deadline timer */
#define X86_FEATURE_AES ( 4*32+25) /* AES instructions */
#define X86_FEATURE_XSAVE ( 4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
#define X86_FEATURE_OSXSAVE ( 4*32+27) /* "" XSAVE enabled in the OS */
#define X86_FEATURE_AVX ( 4*32+28) /* Advanced Vector Extensions */
#define X86_FEATURE_F16C ( 4*32+29) /* 16-bit fp conversions */
#define X86_FEATURE_RDRAND ( 4*32+30) /* The RDRAND instruction */
#define X86_FEATURE_HYPERVISOR ( 4*32+31) /* Running on a hypervisor */
/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
#define X86_FEATURE_XSTORE ( 5*32+ 2) /* "rng" RNG present (xstore) */
#define X86_FEATURE_XSTORE_EN ( 5*32+ 3) /* "rng_en" RNG enabled */
#define X86_FEATURE_XCRYPT ( 5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
#define X86_FEATURE_XCRYPT_EN ( 5*32+ 7) /* "ace_en" on-CPU crypto enabled */
#define X86_FEATURE_ACE2 ( 5*32+ 8) /* Advanced Cryptography Engine v2 */
#define X86_FEATURE_ACE2_EN ( 5*32+ 9) /* ACE v2 enabled */
#define X86_FEATURE_PHE ( 5*32+10) /* PadLock Hash Engine */
#define X86_FEATURE_PHE_EN ( 5*32+11) /* PHE enabled */
#define X86_FEATURE_PMM ( 5*32+12) /* PadLock Montgomery Multiplier */
#define X86_FEATURE_PMM_EN ( 5*32+13) /* PMM enabled */
/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
#define X86_FEATURE_LAHF_LM ( 6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY ( 6*32+ 1) /* If yes HyperThreading not valid */
#define X86_FEATURE_SVM ( 6*32+ 2) /* Secure virtual machine */
#define X86_FEATURE_EXTAPIC ( 6*32+ 3) /* Extended APIC space */
#define X86_FEATURE_CR8_LEGACY ( 6*32+ 4) /* CR8 in 32-bit mode */
#define X86_FEATURE_ABM ( 6*32+ 5) /* Advanced bit manipulation */
#define X86_FEATURE_SSE4A ( 6*32+ 6) /* SSE-4A */
#define X86_FEATURE_MISALIGNSSE ( 6*32+ 7) /* Misaligned SSE mode */
#define X86_FEATURE_3DNOWPREFETCH ( 6*32+ 8) /* 3DNow prefetch instructions */
#define X86_FEATURE_OSVW ( 6*32+ 9) /* OS Visible Workaround */
#define X86_FEATURE_IBS ( 6*32+10) /* Instruction Based Sampling */
#define X86_FEATURE_XOP ( 6*32+11) /* extended AVX instructions */
#define X86_FEATURE_SKINIT ( 6*32+12) /* SKINIT/STGI instructions */
#define X86_FEATURE_WDT ( 6*32+13) /* Watchdog timer */
#define X86_FEATURE_LWP ( 6*32+15) /* Light Weight Profiling */
#define X86_FEATURE_FMA4 ( 6*32+16) /* 4 operands MAC instructions */
#define X86_FEATURE_TCE ( 6*32+17) /* translation cache extension */
#define X86_FEATURE_NODEID_MSR ( 6*32+19) /* NodeId MSR */
#define X86_FEATURE_TBM ( 6*32+21) /* trailing bit manipulations */
#define X86_FEATURE_TOPOEXT ( 6*32+22) /* topology extensions CPUID leafs */
#define X86_FEATURE_PERFCTR_CORE ( 6*32+23) /* core performance counter extensions */
#define X86_FEATURE_PERFCTR_NB ( 6*32+24) /* NB performance counter extensions */
#define X86_FEATURE_BPEXT (6*32+26) /* data breakpoint extension */
#define X86_FEATURE_PERFCTR_L2 ( 6*32+28) /* L2 performance counter extensions */
/*
* Auxiliary flags: Linux defined - For features scattered in various
* CPUID levels like 0x6, 0xA etc, word 7
*/
#define X86_FEATURE_IDA ( 7*32+ 0) /* Intel Dynamic Acceleration */
#define X86_FEATURE_ARAT ( 7*32+ 1) /* Always Running APIC Timer */
#define X86_FEATURE_CPB ( 7*32+ 2) /* AMD Core Performance Boost */
#define X86_FEATURE_EPB ( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
#define X86_FEATURE_PLN ( 7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS ( 7*32+ 6) /* Intel Package Thermal Status */
#define X86_FEATURE_DTHERM ( 7*32+ 7) /* Digital Thermal Sensor */
#define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */
#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
#define X86_FEATURE_HWP ( 7*32+ 10) /* "hwp" Intel HWP */
#define X86_FEATURE_HWP_NOITFY ( 7*32+ 11) /* Intel HWP_NOTIFY */
#define X86_FEATURE_HWP_ACT_WINDOW ( 7*32+ 12) /* Intel HWP_ACT_WINDOW */
#define X86_FEATURE_HWP_EPP ( 7*32+13) /* Intel HWP_EPP */
#define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */
#define X86_FEATURE_INTEL_PT ( 7*32+15) /* Intel Processor Trace */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */
#define X86_FEATURE_VNMI ( 8*32+ 1) /* Intel Virtual NMI */
#define X86_FEATURE_FLEXPRIORITY ( 8*32+ 2) /* Intel FlexPriority */
#define X86_FEATURE_EPT ( 8*32+ 3) /* Intel Extended Page Table */
#define X86_FEATURE_VPID ( 8*32+ 4) /* Intel Virtual Processor ID */
#define X86_FEATURE_NPT ( 8*32+ 5) /* AMD Nested Page Table support */
#define X86_FEATURE_LBRV ( 8*32+ 6) /* AMD LBR Virtualization support */
#define X86_FEATURE_SVML ( 8*32+ 7) /* "svm_lock" AMD SVM locking MSR */
#define X86_FEATURE_NRIPS ( 8*32+ 8) /* "nrip_save" AMD SVM next_rip save */
#define X86_FEATURE_TSCRATEMSR ( 8*32+ 9) /* "tsc_scale" AMD TSC scaling support */
#define X86_FEATURE_VMCBCLEAN ( 8*32+10) /* "vmcb_clean" AMD VMCB clean bits support */
#define X86_FEATURE_FLUSHBYASID ( 8*32+11) /* AMD flush-by-ASID support */
#define X86_FEATURE_DECODEASSISTS ( 8*32+12) /* AMD Decode Assists support */
#define X86_FEATURE_PAUSEFILTER ( 8*32+13) /* AMD filtered pause intercept */
#define X86_FEATURE_PFTHRESHOLD ( 8*32+14) /* AMD pause filter threshold */
#define X86_FEATURE_VMMCALL ( 8*32+15) /* Prefer vmmcall to vmcall */
/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
#define X86_FEATURE_FSGSBASE ( 9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
#define X86_FEATURE_TSC_ADJUST ( 9*32+ 1) /* TSC adjustment MSR 0x3b */
#define X86_FEATURE_BMI1 ( 9*32+ 3) /* 1st group bit manipulation extensions */
#define X86_FEATURE_HLE ( 9*32+ 4) /* Hardware Lock Elision */
#define X86_FEATURE_AVX2 ( 9*32+ 5) /* AVX2 instructions */
#define X86_FEATURE_SMEP ( 9*32+ 7) /* Supervisor Mode Execution Protection */
#define X86_FEATURE_BMI2 ( 9*32+ 8) /* 2nd group bit manipulation extensions */
#define X86_FEATURE_ERMS ( 9*32+ 9) /* Enhanced REP MOVSB/STOSB */
#define X86_FEATURE_INVPCID ( 9*32+10) /* Invalidate Processor Context ID */
#define X86_FEATURE_RTM ( 9*32+11) /* Restricted Transactional Memory */
x86: Add support for Intel Cache QoS Monitoring (CQM) detection This patch adds support for the new Cache QoS Monitoring (CQM) feature found in future Intel Xeon processors. It includes the new values to track CQM resources to the cpuinfo_x86 structure, plus the CPUID detection routines for CQM. CQM allows a process, or set of processes, to be tracked by the CPU to determine the cache usage of that task group. Using this data from the CPU, software can be written to extract this data and report cache usage and occupancy for a particular process, or group of processes. More information about Cache QoS Monitoring can be found in the Intel (R) x86 Architecture Software Developer Manual, section 17.14. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Chris Webb <chris@arachsys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Honeyman <stevenhoneyman@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Link: http://lkml.kernel.org/r/1422038748-21397-5-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-23 11:45:43 -07:00
#define X86_FEATURE_CQM ( 9*32+12) /* Cache QoS Monitoring */
#define X86_FEATURE_MPX ( 9*32+14) /* Memory Protection Extension */
#define X86_FEATURE_AVX512F ( 9*32+16) /* AVX-512 Foundation */
#define X86_FEATURE_RDSEED ( 9*32+18) /* The RDSEED instruction */
#define X86_FEATURE_ADX ( 9*32+19) /* The ADCX and ADOX instructions */
#define X86_FEATURE_SMAP ( 9*32+20) /* Supervisor Mode Access Prevention */
x86/asm: Add support for the pcommit instruction Add support for the new pcommit (persistent commit) instruction. This instruction was announced in the document "Intel Architecture Instruction Set Extensions Programming Reference" with reference number 319433-022: https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf The pcommit instruction ensures that data that has been flushed from the processor's cache hierarchy with clwb, clflushopt or clflush is accepted to memory and is durable on the DIMM. The primary use case for this is persistent memory. This function shows how to properly use clwb/clflushopt/clflush and pcommit with appropriate fencing: void flush_and_commit_buffer(void *vaddr, unsigned int size) { void *vend = vaddr + size - 1; for (; vaddr < vend; vaddr += boot_cpu_data.x86_clflush_size) clwb(vaddr); /* Flush any possible final partial cacheline */ clwb(vend); /* * sfence to order clwb/clflushopt/clflush cache flushes * mfence via mb() also works */ wmb(); /* pcommit and the required sfence for ordering */ pcommit_sfence(); } After this function completes the data pointed to by vaddr is has been accepted to memory and will be durable if the vaddr points to persistent memory. Pcommit must always be ordered by an mfence or sfence, so to help simplify things we include both the pcommit and the required sfence in the alternatives generated by pcommit_sfence(). The other option is to keep them separated, but on platforms that don't support pcommit this would then turn into: void flush_and_commit_buffer(void *vaddr, unsigned int size) { void *vend = vaddr + size - 1; for (; vaddr < vend; vaddr += boot_cpu_data.x86_clflush_size) clwb(vaddr); /* Flush any possible final partial cacheline */ clwb(vend); /* * sfence to order clwb/clflushopt/clflush cache flushes * mfence via mb() also works */ wmb(); nop(); /* from pcommit(), via alternatives */ /* * sfence to order pcommit * mfence via mb() also works */ wmb(); } This is still correct, but now you've got two fences separated by only a nop. With the commit and the fence together in pcommit_sfence() you avoid the final unneeded fence. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1424367448-24254-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-19 10:37:28 -07:00
#define X86_FEATURE_PCOMMIT ( 9*32+22) /* PCOMMIT instruction */
#define X86_FEATURE_CLFLUSHOPT ( 9*32+23) /* CLFLUSHOPT instruction */
x86/asm: Add support for the CLWB instruction Add support for the new CLWB (cache line write back) instruction. This instruction was announced in the document "Intel Architecture Instruction Set Extensions Programming Reference" with reference number 319433-022. https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf The CLWB instruction is used to write back the contents of dirtied cache lines to memory without evicting the cache lines from the processor's cache hierarchy. This should be used in favor of clflushopt or clflush in cases where you require the cache line to be written to memory but plan to access the data again in the near future. One of the main use cases for this is with persistent memory where CLWB can be used with PCOMMIT to ensure that data has been accepted to memory and is durable on the DIMM. This function shows how to properly use CLWB/CLFLUSHOPT/CLFLUSH and PCOMMIT with appropriate fencing: void flush_and_commit_buffer(void *vaddr, unsigned int size) { void *vend = vaddr + size - 1; for (; vaddr < vend; vaddr += boot_cpu_data.x86_clflush_size) clwb(vaddr); /* Flush any possible final partial cacheline */ clwb(vend); /* * Use SFENCE to order CLWB/CLFLUSHOPT/CLFLUSH cache flushes. * (MFENCE via mb() also works) */ wmb(); /* PCOMMIT and the required SFENCE for ordering */ pcommit_sfence(); } After this function completes the data pointed to by vaddr is has been accepted to memory and will be durable if the vaddr points to persistent memory. Regarding the details of how the alternatives assembly is set up, we need one additional byte at the beginning of the CLFLUSH so that we can flip it into a CLFLUSHOPT by changing that byte into a 0x66 prefix. Two options are to either insert a 1 byte ASM_NOP1, or to add a 1 byte NOP_DS_PREFIX. Both have no functional effect with the plain CLFLUSH, but I've been told that executing a CLFLUSH + prefix should be faster than executing a CLFLUSH + NOP. We had to hard code the assembly for CLWB because, lacking the ability to assemble the CLWB instruction itself, the next closest thing is to have an xsaveopt instruction with a 0x66 prefix. Unfortunately XSAVEOPT itself is also relatively new, and isn't included by all the GCC versions that the kernel needs to support. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1422377631-8986-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-27 09:53:51 -07:00
#define X86_FEATURE_CLWB ( 9*32+24) /* CLWB instruction */
#define X86_FEATURE_AVX512PF ( 9*32+26) /* AVX-512 Prefetch */
#define X86_FEATURE_AVX512ER ( 9*32+27) /* AVX-512 Exponential and Reciprocal */
#define X86_FEATURE_AVX512CD ( 9*32+28) /* AVX-512 Conflict Detection */
/* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
#define X86_FEATURE_XSAVEOPT (10*32+ 0) /* XSAVEOPT */
#define X86_FEATURE_XSAVEC (10*32+ 1) /* XSAVEC */
#define X86_FEATURE_XGETBV1 (10*32+ 2) /* XGETBV with ECX = 1 */
#define X86_FEATURE_XSAVES (10*32+ 3) /* XSAVES/XRSTORS */
x86: Add support for Intel Cache QoS Monitoring (CQM) detection This patch adds support for the new Cache QoS Monitoring (CQM) feature found in future Intel Xeon processors. It includes the new values to track CQM resources to the cpuinfo_x86 structure, plus the CPUID detection routines for CQM. CQM allows a process, or set of processes, to be tracked by the CPU to determine the cache usage of that task group. Using this data from the CPU, software can be written to extract this data and report cache usage and occupancy for a particular process, or group of processes. More information about Cache QoS Monitoring can be found in the Intel (R) x86 Architecture Software Developer Manual, section 17.14. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Chris Webb <chris@arachsys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Honeyman <stevenhoneyman@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Link: http://lkml.kernel.org/r/1422038748-21397-5-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-23 11:45:43 -07:00
/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:0 (edx), word 11 */
#define X86_FEATURE_CQM_LLC (11*32+ 1) /* LLC QoS if 1 */
/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:1 (edx), word 12 */
#define X86_FEATURE_CQM_OCCUP_LLC (12*32+ 0) /* LLC occupancy monitoring if 1 */
/*
* BUG word(s)
*/
#define X86_BUG(x) (NCAPINTS*32 + (x))
#define X86_BUG_F00F X86_BUG(0) /* Intel F00F */
#define X86_BUG_FDIV X86_BUG(1) /* FPU FDIV */
#define X86_BUG_COMA X86_BUG(2) /* Cyrix 6x86 coma */
#define X86_BUG_AMD_TLB_MMATCH X86_BUG(3) /* "tlb_mmatch" AMD Erratum 383 */
#define X86_BUG_AMD_APIC_C1E X86_BUG(4) /* "apic_c1e" AMD Erratum 400 */
#define X86_BUG_11AP X86_BUG(5) /* Bad local APIC aka 11AP */
#define X86_BUG_FXSAVE_LEAK X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
#define X86_BUG_CLFLUSH_MONITOR X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
#define X86_BUG_SYSRET_SS_ATTRS X86_BUG(8) /* SYSRET doesn't fix up SS attrs */
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
#include <asm/asm.h>
#include <linux/bitops.h>
#ifdef CONFIG_X86_FEATURE_NAMES
extern const char * const x86_cap_flags[NCAPINTS*32];
extern const char * const x86_power_flags[32];
#define X86_CAP_FMT "%s"
#define x86_cap_flag(flag) x86_cap_flags[flag]
#else
#define X86_CAP_FMT "%d:%d"
#define x86_cap_flag(flag) ((flag) >> 5), ((flag) & 31)
#endif
/*
* In order to save room, we index into this array by doing
* X86_BUG_<name> - NCAPINTS*32.
*/
extern const char * const x86_bug_flags[NBUGINTS*32];
#define test_cpu_cap(c, bit) \
test_bit(bit, (unsigned long *)((c)->x86_capability))
#define REQUIRED_MASK_BIT_SET(bit) \
( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
(((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \
(((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \
(((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) || \
(((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) || \
(((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) || \
(((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \
(((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) || \
(((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) || \
(((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )
x86: Introduce disabled-features I believe the REQUIRED_MASK aproach was taken so that it was easier to consult in assembly (arch/x86/kernel/verify_cpu.S). DISABLED_MASK does not have the same restriction, but I implemented it the same way for consistency. We have a REQUIRED_MASK... which does two things: 1. Keeps a list of cpuid bits to check in very early boot and refuse to boot if those are not present. 2. Consulted during cpu_has() checks, which allows us to optimize out things at compile-time. In other words, if we *KNOW* we will not boot with the feature off, then we can safely assume that it will be present forever. But, we don't have a similar mechanism for CPU features which may be present but that we know we will not use. We simply use our existing mechanisms to repeatedly check the status of the bit at runtime (well, the alternatives patching helps here but it does not provide compile-time optimization). Adding a feature to disabled-features.h allows the bit to be checked via a new macro: cpu_feature_enabled(). Note that for features in DISABLED_MASK, checks with this macro have all of the benefits of an #ifdef. Before, we would have done this in a header: #ifdef CONFIG_X86_INTEL_MPX #define cpu_has_mpx cpu_has(X86_FEATURE_MPX) #else #define cpu_has_mpx 0 #endif and this in the code: if (cpu_has_mpx) do_some_mpx_thing(); Now, just add your feature to DISABLED_MASK and you can do this everywhere, and get the same benefits you would have from #ifdefs: if (cpu_feature_enabled(X86_FEATURE_MPX)) do_some_mpx_thing(); We need a new function and *not* a modification to cpu_has() because there are cases where we actually need to check the CPU itself, despite what features the kernel supports. The best example of this is a hypervisor which has no control over what features its guests are using and where the guest does not depend on the host for support. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: http://lkml.kernel.org/r/20140911211513.9E35E931@viggo.jf.intel.com Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-09-11 15:15:13 -06:00
#define DISABLED_MASK_BIT_SET(bit) \
( (((bit)>>5)==0 && (1UL<<((bit)&31) & DISABLED_MASK0)) || \
(((bit)>>5)==1 && (1UL<<((bit)&31) & DISABLED_MASK1)) || \
(((bit)>>5)==2 && (1UL<<((bit)&31) & DISABLED_MASK2)) || \
(((bit)>>5)==3 && (1UL<<((bit)&31) & DISABLED_MASK3)) || \
(((bit)>>5)==4 && (1UL<<((bit)&31) & DISABLED_MASK4)) || \
(((bit)>>5)==5 && (1UL<<((bit)&31) & DISABLED_MASK5)) || \
(((bit)>>5)==6 && (1UL<<((bit)&31) & DISABLED_MASK6)) || \
(((bit)>>5)==7 && (1UL<<((bit)&31) & DISABLED_MASK7)) || \
(((bit)>>5)==8 && (1UL<<((bit)&31) & DISABLED_MASK8)) || \
(((bit)>>5)==9 && (1UL<<((bit)&31) & DISABLED_MASK9)) )
#define cpu_has(c, bit) \
(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \
test_cpu_cap(c, bit))
#define this_cpu_has(bit) \
(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \
x86_this_cpu_test_bit(bit, (unsigned long *)&cpu_info.x86_capability))
x86: Introduce disabled-features I believe the REQUIRED_MASK aproach was taken so that it was easier to consult in assembly (arch/x86/kernel/verify_cpu.S). DISABLED_MASK does not have the same restriction, but I implemented it the same way for consistency. We have a REQUIRED_MASK... which does two things: 1. Keeps a list of cpuid bits to check in very early boot and refuse to boot if those are not present. 2. Consulted during cpu_has() checks, which allows us to optimize out things at compile-time. In other words, if we *KNOW* we will not boot with the feature off, then we can safely assume that it will be present forever. But, we don't have a similar mechanism for CPU features which may be present but that we know we will not use. We simply use our existing mechanisms to repeatedly check the status of the bit at runtime (well, the alternatives patching helps here but it does not provide compile-time optimization). Adding a feature to disabled-features.h allows the bit to be checked via a new macro: cpu_feature_enabled(). Note that for features in DISABLED_MASK, checks with this macro have all of the benefits of an #ifdef. Before, we would have done this in a header: #ifdef CONFIG_X86_INTEL_MPX #define cpu_has_mpx cpu_has(X86_FEATURE_MPX) #else #define cpu_has_mpx 0 #endif and this in the code: if (cpu_has_mpx) do_some_mpx_thing(); Now, just add your feature to DISABLED_MASK and you can do this everywhere, and get the same benefits you would have from #ifdefs: if (cpu_feature_enabled(X86_FEATURE_MPX)) do_some_mpx_thing(); We need a new function and *not* a modification to cpu_has() because there are cases where we actually need to check the CPU itself, despite what features the kernel supports. The best example of this is a hypervisor which has no control over what features its guests are using and where the guest does not depend on the host for support. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: http://lkml.kernel.org/r/20140911211513.9E35E931@viggo.jf.intel.com Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-09-11 15:15:13 -06:00
/*
* This macro is for detection of features which need kernel
* infrastructure to be used. It may *not* directly test the CPU
* itself. Use the cpu_has() family if you want true runtime
* testing of CPU features, like in hypervisor code where you are
* supporting a possible guest feature where host support for it
* is not relevant.
*/
#define cpu_feature_enabled(bit) \
(__builtin_constant_p(bit) && DISABLED_MASK_BIT_SET(bit) ? 0 : \
cpu_has(&boot_cpu_data, bit))
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define set_cpu_cap(c, bit) set_bit(bit, (unsigned long *)((c)->x86_capability))
#define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability))
#define setup_clear_cpu_cap(bit) do { \
clear_cpu_cap(&boot_cpu_data, bit); \
set_bit(bit, (unsigned long *)cpu_caps_cleared); \
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
set_bit(bit, (unsigned long *)cpu_caps_set); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
#define cpu_has_de boot_cpu_has(X86_FEATURE_DE)
#define cpu_has_pse boot_cpu_has(X86_FEATURE_PSE)
#define cpu_has_tsc boot_cpu_has(X86_FEATURE_TSC)
#define cpu_has_pge boot_cpu_has(X86_FEATURE_PGE)
#define cpu_has_apic boot_cpu_has(X86_FEATURE_APIC)
#define cpu_has_sep boot_cpu_has(X86_FEATURE_SEP)
#define cpu_has_mtrr boot_cpu_has(X86_FEATURE_MTRR)
#define cpu_has_mmx boot_cpu_has(X86_FEATURE_MMX)
#define cpu_has_fxsr boot_cpu_has(X86_FEATURE_FXSR)
#define cpu_has_xmm boot_cpu_has(X86_FEATURE_XMM)
#define cpu_has_xmm2 boot_cpu_has(X86_FEATURE_XMM2)
#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3)
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 12:19:25 -06:00
#define cpu_has_ssse3 boot_cpu_has(X86_FEATURE_SSSE3)
#define cpu_has_aes boot_cpu_has(X86_FEATURE_AES)
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 12:19:25 -06:00
#define cpu_has_avx boot_cpu_has(X86_FEATURE_AVX)
#define cpu_has_avx2 boot_cpu_has(X86_FEATURE_AVX2)
#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT)
#define cpu_has_nx boot_cpu_has(X86_FEATURE_NX)
#define cpu_has_xstore boot_cpu_has(X86_FEATURE_XSTORE)
#define cpu_has_xstore_enabled boot_cpu_has(X86_FEATURE_XSTORE_EN)
#define cpu_has_xcrypt boot_cpu_has(X86_FEATURE_XCRYPT)
#define cpu_has_xcrypt_enabled boot_cpu_has(X86_FEATURE_XCRYPT_EN)
#define cpu_has_ace2 boot_cpu_has(X86_FEATURE_ACE2)
#define cpu_has_ace2_enabled boot_cpu_has(X86_FEATURE_ACE2_EN)
#define cpu_has_phe boot_cpu_has(X86_FEATURE_PHE)
#define cpu_has_phe_enabled boot_cpu_has(X86_FEATURE_PHE_EN)
#define cpu_has_pmm boot_cpu_has(X86_FEATURE_PMM)
#define cpu_has_pmm_enabled boot_cpu_has(X86_FEATURE_PMM_EN)
#define cpu_has_ds boot_cpu_has(X86_FEATURE_DS)
#define cpu_has_pebs boot_cpu_has(X86_FEATURE_PEBS)
#define cpu_has_clflush boot_cpu_has(X86_FEATURE_CLFLUSH)
#define cpu_has_bts boot_cpu_has(X86_FEATURE_BTS)
#define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES)
#define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
#define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT)
#define cpu_has_xmm4_1 boot_cpu_has(X86_FEATURE_XMM4_1)
#define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2)
#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC)
#define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE)
#define cpu_has_xsaveopt boot_cpu_has(X86_FEATURE_XSAVEOPT)
#define cpu_has_xsaves boot_cpu_has(X86_FEATURE_XSAVES)
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 12:19:25 -06:00
#define cpu_has_osxsave boot_cpu_has(X86_FEATURE_OSXSAVE)
#define cpu_has_hypervisor boot_cpu_has(X86_FEATURE_HYPERVISOR)
#define cpu_has_pclmulqdq boot_cpu_has(X86_FEATURE_PCLMULQDQ)
#define cpu_has_perfctr_core boot_cpu_has(X86_FEATURE_PERFCTR_CORE)
#define cpu_has_perfctr_nb boot_cpu_has(X86_FEATURE_PERFCTR_NB)
#define cpu_has_perfctr_l2 boot_cpu_has(X86_FEATURE_PERFCTR_L2)
#define cpu_has_cx8 boot_cpu_has(X86_FEATURE_CX8)
#define cpu_has_cx16 boot_cpu_has(X86_FEATURE_CX16)
#define cpu_has_eager_fpu boot_cpu_has(X86_FEATURE_EAGER_FPU)
#define cpu_has_topoext boot_cpu_has(X86_FEATURE_TOPOEXT)
#define cpu_has_bpext boot_cpu_has(X86_FEATURE_BPEXT)
#if __GNUC__ >= 4
extern void warn_pre_alternatives(void);
extern bool __static_cpu_has_safe(u16 bit);
/*
* Static testing of CPU features. Used the same as boot_cpu_has().
* These are only valid after alternatives have run, but will statically
* patch the target code for additional performance.
*/
static __always_inline __pure bool __static_cpu_has(u16 bit)
{
#ifdef CC_HAVE_ASM_GOTO
#ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
/*
* Catch too early usage of this before alternatives
* have run.
*/
asm_volatile_goto("1: jmp %l[t_warn]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n"
" .long 0\n" /* no replacement */
" .word %P0\n" /* 1: do replace */
" .byte 2b - 1b\n" /* source len */
" .byte 0\n" /* replacement len */
" .byte 0\n" /* pad len */
".previous\n"
/* skipping size check since replacement size = 0 */
: : "i" (X86_FEATURE_ALWAYS) : : t_warn);
#endif
asm_volatile_goto("1: jmp %l[t_no]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n"
" .long 0\n" /* no replacement */
" .word %P0\n" /* feature bit */
" .byte 2b - 1b\n" /* source len */
" .byte 0\n" /* replacement len */
" .byte 0\n" /* pad len */
".previous\n"
/* skipping size check since replacement size = 0 */
: : "i" (bit) : : t_no);
return true;
t_no:
return false;
#ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
t_warn:
warn_pre_alternatives();
return false;
#endif
#else /* CC_HAVE_ASM_GOTO */
u8 flag;
/* Open-coded due to __stringify() in ALTERNATIVE() */
asm volatile("1: movb $0,%0\n"
"2:\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n"
" .long 3f - .\n"
" .word %P1\n" /* feature bit */
" .byte 2b - 1b\n" /* source len */
" .byte 4f - 3f\n" /* replacement len */
" .byte 0\n" /* pad len */
".previous\n"
".section .discard,\"aw\",@progbits\n"
" .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
".previous\n"
".section .altinstr_replacement,\"ax\"\n"
"3: movb $1,%0\n"
"4:\n"
".previous\n"
: "=qm" (flag) : "i" (bit));
return flag;
#endif /* CC_HAVE_ASM_GOTO */
}
#define static_cpu_has(bit) \
( \
__builtin_constant_p(boot_cpu_has(bit)) ? \
boot_cpu_has(bit) : \
__builtin_constant_p(bit) ? \
__static_cpu_has(bit) : \
boot_cpu_has(bit) \
)
static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
{
#ifdef CC_HAVE_ASM_GOTO
x86/alternatives: Make JMPs more robust Up until now we had to pay attention to relative JMPs in alternatives about how their relative offset gets computed so that the jump target is still correct. Or, as it is the case for near CALLs (opcode e8), we still have to go and readjust the offset at patching time. What is more, the static_cpu_has_safe() facility had to forcefully generate 5-byte JMPs since we couldn't rely on the compiler to generate properly sized ones so we had to force the longest ones. Worse than that, sometimes it would generate a replacement JMP which is longer than the original one, thus overwriting the beginning of the next instruction at patching time. So, in order to alleviate all that and make using JMPs more straight-forward we go and pad the original instruction in an alternative block with NOPs at build time, should the replacement(s) be longer. This way, alternatives users shouldn't pay special attention so that original and replacement instruction sizes are fine but the assembler would simply add padding where needed and not do anything otherwise. As a second aspect, we go and recompute JMPs at patching time so that we can try to make 5-byte JMPs into two-byte ones if possible. If not, we still have to recompute the offsets as the replacement JMP gets put far away in the .altinstr_replacement section leading to a wrong offset if copied verbatim. For example, on a locally generated kernel image old insn VA: 0xffffffff810014bd, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to: ffffffff810014bd: eb 21 jmp ffffffff810014e0 repl insn: size: 5 ffffffff81d0b23c: e9 b1 62 2f ff jmpq ffffffff810014f2 gets corrected to a 2-byte JMP: apply_alternatives: feat: 3*32+21, old: (ffffffff810014bd, len: 2), repl: (ffffffff81d0b23c, len: 5) alt_insn: e9 b1 62 2f ff recompute_jumps: next_rip: ffffffff81d0b241, tgt_rip: ffffffff810014f2, new_displ: 0x00000033, ret len: 2 converted to: eb 33 90 90 90 and a 5-byte JMP: old insn VA: 0xffffffff81001516, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to: ffffffff81001516: eb 30 jmp ffffffff81001548 repl insn: size: 5 ffffffff81d0b241: e9 10 63 2f ff jmpq ffffffff81001556 gets shortened into a two-byte one: apply_alternatives: feat: 3*32+21, old: (ffffffff81001516, len: 2), repl: (ffffffff81d0b241, len: 5) alt_insn: e9 10 63 2f ff recompute_jumps: next_rip: ffffffff81d0b246, tgt_rip: ffffffff81001556, new_displ: 0x0000003e, ret len: 2 converted to: eb 3e 90 90 90 ... and so on. This leads to a net win of around 40ish replacements * 3 bytes savings =~ 120 bytes of I$ on an AMD guest which means some savings of precious instruction cache bandwidth. The padding to the shorter 2-byte JMPs are single-byte NOPs which on smart microarchitectures means discarding NOPs at decode time and thus freeing up execution bandwidth. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-05 05:48:41 -07:00
asm_volatile_goto("1: jmp %l[t_dynamic]\n"
"2:\n"
".skip -(((5f-4f) - (2b-1b)) > 0) * "
"((5f-4f) - (2b-1b)),0x90\n"
"3:\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n" /* src offset */
" .long 4f - .\n" /* repl offset */
" .word %P1\n" /* always replace */
" .byte 3b - 1b\n" /* src len */
" .byte 5f - 4f\n" /* repl len */
" .byte 3b - 2b\n" /* pad len */
".previous\n"
".section .altinstr_replacement,\"ax\"\n"
x86/alternatives: Make JMPs more robust Up until now we had to pay attention to relative JMPs in alternatives about how their relative offset gets computed so that the jump target is still correct. Or, as it is the case for near CALLs (opcode e8), we still have to go and readjust the offset at patching time. What is more, the static_cpu_has_safe() facility had to forcefully generate 5-byte JMPs since we couldn't rely on the compiler to generate properly sized ones so we had to force the longest ones. Worse than that, sometimes it would generate a replacement JMP which is longer than the original one, thus overwriting the beginning of the next instruction at patching time. So, in order to alleviate all that and make using JMPs more straight-forward we go and pad the original instruction in an alternative block with NOPs at build time, should the replacement(s) be longer. This way, alternatives users shouldn't pay special attention so that original and replacement instruction sizes are fine but the assembler would simply add padding where needed and not do anything otherwise. As a second aspect, we go and recompute JMPs at patching time so that we can try to make 5-byte JMPs into two-byte ones if possible. If not, we still have to recompute the offsets as the replacement JMP gets put far away in the .altinstr_replacement section leading to a wrong offset if copied verbatim. For example, on a locally generated kernel image old insn VA: 0xffffffff810014bd, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to: ffffffff810014bd: eb 21 jmp ffffffff810014e0 repl insn: size: 5 ffffffff81d0b23c: e9 b1 62 2f ff jmpq ffffffff810014f2 gets corrected to a 2-byte JMP: apply_alternatives: feat: 3*32+21, old: (ffffffff810014bd, len: 2), repl: (ffffffff81d0b23c, len: 5) alt_insn: e9 b1 62 2f ff recompute_jumps: next_rip: ffffffff81d0b241, tgt_rip: ffffffff810014f2, new_displ: 0x00000033, ret len: 2 converted to: eb 33 90 90 90 and a 5-byte JMP: old insn VA: 0xffffffff81001516, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to: ffffffff81001516: eb 30 jmp ffffffff81001548 repl insn: size: 5 ffffffff81d0b241: e9 10 63 2f ff jmpq ffffffff81001556 gets shortened into a two-byte one: apply_alternatives: feat: 3*32+21, old: (ffffffff81001516, len: 2), repl: (ffffffff81d0b241, len: 5) alt_insn: e9 10 63 2f ff recompute_jumps: next_rip: ffffffff81d0b246, tgt_rip: ffffffff81001556, new_displ: 0x0000003e, ret len: 2 converted to: eb 3e 90 90 90 ... and so on. This leads to a net win of around 40ish replacements * 3 bytes savings =~ 120 bytes of I$ on an AMD guest which means some savings of precious instruction cache bandwidth. The padding to the shorter 2-byte JMPs are single-byte NOPs which on smart microarchitectures means discarding NOPs at decode time and thus freeing up execution bandwidth. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-05 05:48:41 -07:00
"4: jmp %l[t_no]\n"
"5:\n"
".previous\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n" /* src offset */
" .long 0\n" /* no replacement */
" .word %P0\n" /* feature bit */
" .byte 3b - 1b\n" /* src len */
" .byte 0\n" /* repl len */
" .byte 0\n" /* pad len */
".previous\n"
: : "i" (bit), "i" (X86_FEATURE_ALWAYS)
: : t_dynamic, t_no);
return true;
t_no:
return false;
t_dynamic:
return __static_cpu_has_safe(bit);
#else
u8 flag;
/* Open-coded due to __stringify() in ALTERNATIVE() */
asm volatile("1: movb $2,%0\n"
"2:\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n" /* src offset */
" .long 3f - .\n" /* repl offset */
" .word %P2\n" /* always replace */
" .byte 2b - 1b\n" /* source len */
" .byte 4f - 3f\n" /* replacement len */
" .byte 0\n" /* pad len */
".previous\n"
".section .discard,\"aw\",@progbits\n"
" .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
".previous\n"
".section .altinstr_replacement,\"ax\"\n"
"3: movb $0,%0\n"
"4:\n"
".previous\n"
".section .altinstructions,\"a\"\n"
" .long 1b - .\n" /* src offset */
" .long 5f - .\n" /* repl offset */
" .word %P1\n" /* feature bit */
" .byte 4b - 3b\n" /* src len */
" .byte 6f - 5f\n" /* repl len */
" .byte 0\n" /* pad len */
".previous\n"
".section .discard,\"aw\",@progbits\n"
" .byte 0xff + (6f-5f) - (4b-3b)\n" /* size check */
".previous\n"
".section .altinstr_replacement,\"ax\"\n"
"5: movb $1,%0\n"
"6:\n"
".previous\n"
: "=qm" (flag)
: "i" (bit), "i" (X86_FEATURE_ALWAYS));
return (flag == 2 ? __static_cpu_has_safe(bit) : flag);
#endif /* CC_HAVE_ASM_GOTO */
}
#define static_cpu_has_safe(bit) \
( \
__builtin_constant_p(boot_cpu_has(bit)) ? \
boot_cpu_has(bit) : \
_static_cpu_has_safe(bit) \
)
#else
/*
* gcc 3.x is too stupid to do the static test; fall back to dynamic.
*/
#define static_cpu_has(bit) boot_cpu_has(bit)
#define static_cpu_has_safe(bit) boot_cpu_has(bit)
#endif
#define cpu_has_bug(c, bit) cpu_has(c, (bit))
#define set_cpu_bug(c, bit) set_cpu_cap(c, (bit))
#define clear_cpu_bug(c, bit) clear_cpu_cap(c, (bit))
#define static_cpu_has_bug(bit) static_cpu_has((bit))
#define static_cpu_has_bug_safe(bit) static_cpu_has_safe((bit))
#define boot_cpu_has_bug(bit) cpu_has_bug(&boot_cpu_data, (bit))
#define MAX_CPU_FEATURES (NCAPINTS * 32)
#define cpu_have_feature boot_cpu_has
#define CPU_FEATURE_TYPEFMT "x86,ven%04Xfam%04Xmod%04X"
#define CPU_FEATURE_TYPEVAL boot_cpu_data.x86_vendor, boot_cpu_data.x86, \
boot_cpu_data.x86_model
#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
#endif /* _ASM_X86_CPUFEATURE_H */