1
0
Fork 0
Commit Graph

4452 Commits (redonkable)

Author SHA1 Message Date
Jonathan Neuschäfer bbabc3fb2b firmware_loader: Fix a typo ("syfs" -> "sysfs")
"sysfs" was misspelled in a comment and a log message.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-01 18:31:11 +02:00
Greg Kroah-Hartman 391c0325cc Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
This reverts commit edb16da34b as it
breaks existing systems as reported by Krzysztof.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29 19:49:21 +02:00
Ulf Hansson f9ccd7c3a1 PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
Attaching a device via genpd_dev_pm_attach_by_id|name() makes
genpd allocate a virtual device that it attaches instead. This
leads to a problem in case when the base device belongs to a CPU.
More precisely, it means genpd_get_cpu() compares against the
virtual device, thus it fails to find a matching CPU device.

Address this limitation by passing the base device to genpd_get_cpu()
rather than the virtual device.

Moreover, to deal with detach correctly from genpd_remove_device(),
store the CPU number in struct generic_pm_domain_data, so as to be
able to clear the corresponding bit in the cpumask for the genpd.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 23:18:03 +02:00
Ulf Hansson b24e196586 PM / Domains: Search for the CPU device outside the genpd lock
While attaching/detaching a device to a PM domain (genpd) with
GENPD_FLAG_CPU_DOMAIN set, genpd iterates the cpu_possible_mask to
check whether or not the device corresponds to a CPU. This iteration
is done while holding the genpd's lock, which is unnecessary.

Avoid the locking by restructuring the corresponding code a bit.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 23:18:03 +02:00
Ulf Hansson a174920d69 PM / Domains: Drop unused in-parameter to some genpd functions
Both genpd_alloc_dev_data() and genpd_add_device(), that are internal
genpd functions, allow a struct gpd_timing_data *td to be passed as an
in-parameter. However, as NULL is always passed, let's just drop the
in-parameter altogether.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 23:18:03 +02:00
Ulf Hansson 51dcf7482f PM / Domains: Use the base device for driver_deferred_probe_check_state()
When genpd fails to attach a device to one of its multiple PM domains,
we end up calling driver_deferred_probe_check_state() for the recently
allocated virtual device. This is incorrect, as it's the base device
that is being probed.

Fix this by passing along the base device to __genpd_dev_pm_attach()
and use that instead.

Fixes: e01afc3250 ("PM / Domains: Stop deferring probe at the end of initcall")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 23:18:03 +02:00
Rafael J. Wysocki 40aa4db6d5 Merge cpuidle material depended on by the subsequent changes. 2019-04-25 23:17:07 +02:00
Venkata Narendra Kumar Gutta edb16da34b driver core: platform: Fix the usage of platform device name(pdev->name)
Platform core is using pdev->name as the platform device name to do
the binding of the devices with the drivers. But, when the platform
driver overrides the platform device name with dev_set_name(),
the pdev->name is pointing to a location which is freed and becomes
an invalid parameter to do the binding match.

use-after-free instance:

[   33.325013] BUG: KASAN: use-after-free in strcmp+0x8c/0xb0
[   33.330646] Read of size 1 at addr ffffffc10beae600 by task modprobe
[   33.339068] CPU: 5 PID: 518 Comm: modprobe Tainted:
			G S      W  O      4.19.30+ #3
[   33.346835] Hardware name: MTP (DT)
[   33.350419] Call trace:
[   33.352941]  dump_backtrace+0x0/0x3b8
[   33.356713]  show_stack+0x24/0x30
[   33.360119]  dump_stack+0x160/0x1d8
[   33.363709]  print_address_description+0x84/0x2e0
[   33.368549]  kasan_report+0x26c/0x2d0
[   33.372322]  __asan_report_load1_noabort+0x2c/0x38
[   33.377248]  strcmp+0x8c/0xb0
[   33.380306]  platform_match+0x70/0x1f8
[   33.384168]  __driver_attach+0x78/0x3a0
[   33.388111]  bus_for_each_dev+0x13c/0x1b8
[   33.392237]  driver_attach+0x4c/0x58
[   33.395910]  bus_add_driver+0x350/0x560
[   33.399854]  driver_register+0x23c/0x328
[   33.403886]  __platform_driver_register+0xd0/0xe0

So, use dev_name(&pdev->dev), which fetches the platform device name from
the kobject(dev->kobj->name) of the device instead of the pdev->name.

Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 22:22:12 +02:00
John Garry 0b777eee88 driver core: Postpone DMA tear-down until after devres release for probe failure
In commit 376991db4b ("driver core: Postpone DMA tear-down until after
devres release"), we changed the ordering of tearing down the device DMA
ops and releasing all the device's resources; this was because the DMA ops
should be maintained until we release the device's managed DMA memories.

However, we have seen another crash on an arm64 system when a
device driver probe fails:

  hisi_sas_v3_hw 0000:74:02.0: Adding to iommu group 2
  scsi host1: hisi_sas_v3_hw
  BUG: Bad page state in process swapper/0  pfn:313f5
  page:ffff7e0000c4fd40 count:1 mapcount:0
  mapping:0000000000000000 index:0x0
  flags: 0xfffe00000001000(reserved)
  raw: 0fffe00000001000 ffff7e0000c4fd48 ffff7e0000c4fd48
0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
  page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
  bad because of flags: 0x1000(reserved)
  Modules linked in:
  CPU: 49 PID: 1 Comm: swapper/0 Not tainted
5.1.0-rc1-43081-g22d97fd-dirty #1433
  Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - V1.12.01 01/29/2019
  Call trace:
  dump_backtrace+0x0/0x118
  show_stack+0x14/0x1c
  dump_stack+0xa4/0xc8
  bad_page+0xe4/0x13c
  free_pages_check_bad+0x4c/0xc0
  __free_pages_ok+0x30c/0x340
  __free_pages+0x30/0x44
  __dma_direct_free_pages+0x30/0x38
  dma_direct_free+0x24/0x38
  dma_free_attrs+0x9c/0xd8
  dmam_release+0x20/0x28
  release_nodes+0x17c/0x220
  devres_release_all+0x34/0x54
  really_probe+0xc4/0x2c8
  driver_probe_device+0x58/0xfc
  device_driver_attach+0x68/0x70
  __driver_attach+0x94/0xdc
  bus_for_each_dev+0x5c/0xb4
  driver_attach+0x20/0x28
  bus_add_driver+0x14c/0x200
  driver_register+0x6c/0x124
  __pci_register_driver+0x48/0x50
  sas_v3_pci_driver_init+0x20/0x28
  do_one_initcall+0x40/0x25c
  kernel_init_freeable+0x2b8/0x3c0
  kernel_init+0x10/0x100
  ret_from_fork+0x10/0x18
  Disabling lock debugging due to kernel taint
  BUG: Bad page state in process swapper/0  pfn:313f6
  page:ffff7e0000c4fd80 count:1 mapcount:0
mapping:0000000000000000 index:0x0
[   89.322983] flags: 0xfffe00000001000(reserved)
  raw: 0fffe00000001000 ffff7e0000c4fd88 ffff7e0000c4fd88
0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000

The crash occurs for the same reason.

In this case, on the really_probe() failure path, we are still clearing
the DMA ops prior to releasing the device's managed memories.

This patch fixes this issue by reordering the DMA ops teardown and the
call to devres_release_all() on the failure path.

Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:48:37 +02:00
Andy Shevchenko 25ebcb7dc8 driver core: platform: Propagate error from insert_resource()
Since insert_resource() might return an error we don't need
to shadow its error code and would safely propagate to the user.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:48:37 +02:00
Mark Brown 615c4d9a50
Merge branch 'regmap-5.2' into regmap-next 2019-04-25 20:27:04 +01:00
Mark Brown 7fdc9fc874
Merge branch 'regmap-5.1' into regmap-linus 2019-04-25 20:27:00 +01:00
Greg Kroah-Hartman 37613fa5b7
regmap: add proper SPDX identifiers on files that did not have them.
There were a few files in the regmap code that did not have SPDX
identifiers on them, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Also, as Mark loves // comment markers, convert all of the headers to be
the same to make things look consistent :)

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-25 20:22:15 +01:00
Bartosz Golaszewski 7067c96ee8 drivers: fix a typo in the kernel doc for devm_platform_ioremap_resource()
It should have been 'management' not 'managemend'.

Fixes: 7945f929f1 ("drivers: provide devm_platform_ioremap_resource()")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 19:49:17 +02:00
zhong jiang d2ab99403e mm/memory_hotplug: Do not unlock when fails to take the device_hotplug_lock
When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes it.

That issue was introduced in Commit 8df1d0e4a2
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")

We should drop out in time when fails to take the device_hotplug_lock.

Fixes: 8df1d0e4a2 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
Reported-by: Yang yingliang <yangyingliang@huawei.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 19:40:20 +02:00
Borislav Petkov affada726c driver core: Clarify which counterparts to use to device_add()
It is not absolutely clear from the docs how the cleanup path after
device_add() should look like so spell it out explicitly.

No functional changes, just documentation.

Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 19:34:54 +02:00
Ulf Hansson 3ccf3f0cd1 PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
If a call to dev_pm_domain_attach() succeeds to attach a device to its
single PM domain, the important point is to prevent subsequent
dev_pm_domain_attach_by_name|id() calls from failing. That is done by
checking the dev->pm_domain pointer and then returning -EEXIST, rather
than continuing to call genpd_dev_pm_attach_by_id|name().

For this reason, enable genpd_dev_pm_attach_by_id|name() to be used for
single PM domains too. This simplifies future users, so they only need
to use dev_pm_domain_attach_by_id|name() instead of having to combine
it with dev_pm_domain_attach().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 09:38:25 +02:00
Ulf Hansson e8b04de9da PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
A genpd provider that uses the ->attach_dev() callback to look up
resources for a device fails to do so when the device has multiple
PM domains attached.  That is because when genpd invokes the
->attach_dev() callback, it passes the allocated virtual device as
the in-parameter.

To address this problem, simply assign the dev->of_node for the
virtual device, based upon the original device's OF node.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 09:37:36 +02:00
Ulf Hansson 71b77697af PM / Domains: Don't kfree() the virtual device in the error path
It's not correct to call kfree(dev) when device_register(dev) has failed.

Fix this by calling put_device(dev) instead.

Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-25 09:37:28 +02:00
zhong jiang 37803841c9 mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
When adding memory by probing a memory block in the sysfs interface,
there is an obvious issue where we will unlock the device_hotplug_lock
when we failed to takes it.

That issue was introduced in 8df1d0e4a2 ("mm/memory_hotplug: make
add_memory() take the device_hotplug_lock").

We should drop out in time when failing to take the device_hotplug_lock.

Link: http://lkml.kernel.org/r/1554696437-9593-1-git-send-email-zhongjiang@huawei.com
Fixes: 8df1d0e4a2 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reported-by: Yang yingliang <yangyingliang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 09:46:04 -07:00
David Howells 5dd50aaeb1
Make anon_inodes unconditional
Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[christian@brauner.io: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-19 14:03:11 +02:00
Sakari Ailus 0fcc2bdc8a device property: Add fwnode_graph_get_endpoint_by_id()
fwnode_graph_get_endpoint_by_id() is intended for obtaining local
endpoints by a given local port.

fwnode_graph_get_endpoint_by_id() is slightly different from its OF
counterpart, of_graph_get_endpoint_by_regs(): instead of using -1 as
a value to indicate that a port or an endpoint number does not matter,
it uses flags to look for equal or greater endpoint. The port number
is always fixed. It also returns only remote endpoints that belong
to an available device, a behaviour that can be turned off with a flag.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-18 16:44:05 +02:00
Yangtao Li e757e7fa3a PM / Domains: remove unnecessary unlikely()
WARN_ON() already contains an unlikely(), so it's not necessary to use
unlikely.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-18 16:36:41 +02:00
Ulf Hansson dc351d4c5f PM / core: Propagate dev->power.wakeup_path when no callbacks
The dev->power.direct_complete flag may become set in device_prepare() in
case the device don't have any PM callbacks (dev->power.no_pm_callbacks is
set). This leads to a broken behaviour, when there is child having wakeup
enabled and relies on its parent to be used in the wakeup path.

More precisely, when the direct complete path becomes selected for the
child in __device_suspend(), the propagation of the dev->power.wakeup_path
becomes skipped as well.

Let's address this problem, by checking if the device is a part the wakeup
path or has wakeup enabled, then prevent the direct complete path from
being used.

Reported-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Comment cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12 11:03:53 +02:00
Ulf Hansson e94999688e PM / Domains: Add genpd governor for CPUs
After some preceding changes, PM domains managed by genpd may contain
CPU devices, so idle state residency values should be taken into
account during the state selection process. [The residency value is
the minimum amount of time to be spent by a CPU (or a group of CPUs)
in an idle state in order to save more energy than could be saved
by picking up a shallower idle state.]

For this purpose, add a new genpd governor, pm_domain_cpu_gov, to be
used for selecting idle states of PM domains with CPU devices attached
either directly or through subdomains.

The new governor computes the minimum expected idle duration for all
online CPUs attached to a PM domain and its subdomains.  Next, it
finds the deepest idle state whose target residency is within the
expected idle duration and selects it as the target idle state of
the domain.

It should be noted that the minimum expected idle duration computation
is based on the closest timer event information stored in the per-CPU
variables cpuidle_devices for all of the CPUs in the domain.  That
needs to be revisited in future, as obviously there are other reasons
why a CPU may be woken up from idle.

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-11 22:41:01 +02:00
Yangtao Li f2a424f6c6 PM / core: Introduce dpm_async_fn() helper
When we want to execute device pm functions asynchronously, we'll
do the following for the device:

  1) reinit_completion(&dev->power.completion);
  2) Check if the device enables asynchronous suspend.
  3) If necessary, execute the corresponding function asynchronously.

There are a lot of such repeated operations here, in fact we can avoid
this. So introduce dpm_async_fn() to have better code readability and
reuse.

And use this function to do some cleanup.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-10 10:03:22 +02:00
Ulf Hansson eb594b7325 PM / Domains: Add support for CPU devices to genpd
To enable a CPU device to be attached to a PM domain managed by genpd,
make a few changes to it for convenience.

To be able to quickly find out what CPUs are attached to a genpd,
which typically becomes useful from a genpd governor as subsequent
changes are about to show, add a cpumask to struct generic_pm_domain
to be updated when a CPU device gets attached to the genpd containing
that cpumask. Also, propagate the cpumask changes upwards in the
domain hierarchy to the master PM domains. This way, the cpumask for
a genpd hierarchically reflects all CPUs attached to the topology
below it.

Finally, make this an opt-in feature, to avoid having to manage CPUs
and the cpumask for a genpd that don't need it. To that end, add
a new genpd configuration bit, GENPD_FLAG_CPU_DOMAIN.

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-10 00:32:34 +02:00
Ulf Hansson 49a27e2790 PM / Domains: Add generic data pointer to struct genpd_power_state
Add a data pointer to the genpd_power_state struct, to allow a genpd
backend driver to store per-state specific data. To introduce the
pointer, change the way genpd deals with freeing of the corresponding
allocated data.

More precisely, clarify the responsibility of whom that shall free the
data, by adding a ->free_states() callback to the generic_pm_domain
structure. The one allocating the data will be expected to set the
callback, to allow genpd to invoke it from genpd_remove().

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-10 00:32:34 +02:00
Sakari Ailus d75f773c86 treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-09 14:19:06 +02:00
Yangtao Li 0b237cb2fc PM / core: fix kerneldoc comment for device_pm_wait_for_dev()
Rearrange comment to make the comment style consistent, the previous
function parameters are described first.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 12:18:01 +02:00
Yangtao Li c4a586fdd4 PM / core: fix kerneldoc comment for dpm_watchdog_handler()
This brings the kernel doc in line with the function signature.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 12:18:00 +02:00
Greg Kroah-Hartman 5de363b66a drivers: base: power: add proper SPDX identifiers on files that did not have them.
There were a few files in the driver core power code that did not have
SPDX identifiers on them, so fix that up.  At the same time, remove the
"free form" text that specified the license of the file, as that is
impossible for any tool to properly parse.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 20:03:40 +02:00
Greg Kroah-Hartman 50f86aedfa drivers: base: firmware_loader: add proper SPDX identifiers on files that did not have them.
There were two files in the firmware_loader code that did not have SPDX
identifiers on them, so fix that up.

Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 20:03:40 +02:00
Greg Kroah-Hartman 47bcc18c7e drivers: base: test: add proper SPDX identifier to Makefile
The Makefile in the drivers/base/test/ directory did not have a SPDX
identifier on it, so fix that up.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 20:03:40 +02:00
Lingutla Chandrasekhar 5d777b185f arch_topology: Make cpu_capacity sysfs node as read-only
If user updates any cpu's cpu_capacity, then the new value is going to
be applied to all its online sibling cpus. But this need not to be correct
always, as sibling cpus (in ARM, same micro architecture cpus) would have
different cpu_capacity with different performance characteristics.
So, updating the user supplied cpu_capacity to all cpu siblings
is not correct.

And another problem is, current code assumes that 'all cpus in a cluster
or with same package_id (core_siblings), would have same cpu_capacity'.
But with commit '5bdd2b3f0f8 ("arm64: topology: add support to remove
cpu topology sibling masks")', when a cpu hotplugged out, the cpu
information gets cleared in its sibling cpus. So, user supplied
cpu_capacity would be applied to only online sibling cpus at the time.
After that, if any cpu hotplugged in, it would have different cpu_capacity
than its siblings, which breaks the above assumption.

So, instead of mucking around the core sibling mask for user supplied
value, use device-tree to set cpu capacity. And make the cpu_capacity
node as read-only to know the asymmetry between cpus in the system.
While at it, remove cpu_scale_mutex usage, which used for sysfs write
protection.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Quentin Perret <quentin.perret@arm.com>
Reviewed-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch acc02a109b node: Add memory-side caching attributes
System memory may have caches to help improve access speed to frequently
requested address ranges. While the system provided cache is transparent
to the software accessing these memory ranges, applications can optimize
their own access based on cache attributes.

Provide a new API for the kernel to register these memory-side caches
under the memory node that provides it.

The new sysfs representation is modeled from the existing cpu cacheinfo
attributes, as seen from /sys/devices/system/cpu/<cpu>/cache/.  Unlike CPU
cacheinfo though, the node cache level is reported from the view of the
memory. A higher level number is nearer to the CPU, while lower levels
are closer to the last level memory.

The exported attributes are the cache size, the line size, associativity
indexing, and write back policy, and add the attributes for the system
memory caches to sysfs stable documentation.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch e1cf33aafb node: Add heterogenous memory access attributes
Heterogeneous memory systems provide memory nodes with different latency
and bandwidth performance attributes. Provide a new kernel interface
for subsystems to register the attributes under the memory target
node's initiator access class. If the system provides this information,
applications may query these attributes when deciding which node to
request memory.

The following example shows the new sysfs hierarchy for a node exporting
performance attributes:

  # tree -P "read*|write*"/sys/devices/system/node/nodeY/accessZ/initiators/
  /sys/devices/system/node/nodeY/accessZ/initiators/
  |-- read_bandwidth
  |-- read_latency
  |-- write_bandwidth
  `-- write_latency

The bandwidth is exported as MB/s and latency is reported in
nanoseconds. The values are taken from the platform as reported by the
manufacturer.

Memory accesses from an initiator node that is not one of the memory's
access "Z" initiator nodes linked in the same directory may observe
different performance than reported here. When a subsystem makes use
of this interface, initiators of a different access number may not have
the same performance relative to initiators in other access numbers, or
omitted from the any access class' initiators.

Descriptions for memory access initiator performance access attributes
are added to sysfs stable documentation.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch 08d9dbe72b node: Link memory nodes to their compute nodes
Systems may be constructed with various specialized nodes. Some nodes
may provide memory, some provide compute devices that access and use
that memory, and others may provide both. Nodes that provide memory are
referred to as memory targets, and nodes that can initiate memory access
are referred to as memory initiators.

Memory targets will often have varying access characteristics from
different initiators, and platforms may have ways to express those
relationships. In preparation for these systems, provide interfaces for
the kernel to export the memory relationship among different nodes memory
targets and their initiators with symlinks to each other.

If a system provides access locality for each initiator-target pair, nodes
may be grouped into ranked access classes relative to other nodes. The
new interface allows a subsystem to register relationships of varying
classes if available and desired to be exported.

A memory initiator may have multiple memory targets in the same access
class. The target memory's initiators in a given class indicate the
nodes access characteristics share the same performance relative to other
linked initiator nodes. Each target within an initiator's access class,
though, do not necessarily perform the same as each other.

A memory target node may have multiple memory initiators. All linked
initiators in a target's class have the same access characteristics to
that target.

The following example show the nodes' new sysfs hierarchy for a memory
target node 'Y' with access class 0 from initiator node 'X':

  # symlinks -v /sys/devices/system/node/nodeX/access0/
  relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY

  # symlinks -v /sys/devices/system/node/nodeY/access0/
  relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX

The new attributes are added to the sysfs stable documentation.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:20 +02:00
Han Nandor 8b9f9d4dc5
regmap: verify if register is writeable before writing operations
regmap provides a couple of ways to validate the register range used.
a) maxim allowed register, b) writable/readable register tables,
c) callback function that can be provided by the driver to validate
a register. regmap framework should verify if registers
are writeable before every write operation. However this doesn't
seems to happen in every situation.

The method `_regmap_raw_write_impl` is only using the `writeable_reg`
callback to verify if register is writeable, ignoring the other two.
This can lead to undefined behaviour since this allows to write to
registers that could be declared un-writeable by using any other
option.

Change `_regmap_raw_write_impl` to use the `regmap_writeable` method
to verify if registers are writable before the write operation.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03 11:08:11 +07:00
Stephen Boyd 74a1dd86d1 PM / wakeup: Use pm_pr_dbg() instead of pr_debug()
These prints are useful if we're doing PM suspend debugging. Having them
at pr_debug() level means that we need to either enable DEBUG in this
file, or compile the kernel with dynamic debug capabilities. Both of
these options have drawbacks like custom compilation or opting into all
debug statements being included into the kernel image. Given that we
already have infrastructure to collect PM debugging information with
CONFIG_PM_DEBUG and friends, let's change the pr_debug usage here to be
pm_pr_dbg() instead so we can collect the wakeup information in the
kernel logs.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01 23:54:47 +02:00
Srinivas Kandagatla 8293488205
regmap: regmap-irq: fix getting type default values
Checking for value of type default value just after allocating will
always be zero and the type register default values will never be read,
so fix this!

Without this patch setting irq type will be silently ignored.
Patch "regmap: regmap-irq: Remove default irq type setting from core"
did remove the default mask but it forgot to remove the check before
reading the default type register.

Fixes: 84267d1b18 ("regmap: regmap-irq: Remove default irq type setting from core")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-01 15:11:41 +07:00
Geert Uytterhoeven 1be01d4a57 driver: base: Disable CONFIG_UEVENT_HELPER by default
Since commit 7934779a69 ("Driver-Core: disable /sbin/hotplug by
default"), the help text for the /sbin/hotplug fork-bomb says
"This should not be used today [...] creates a high system load, or
[...] out-of-memory situations during bootup".  The rationale for this
was that no recent mainstream system used this anymore (in 2010!).

A few years later, the complete uevent helper support was made optional
in commit 86d56134f1 ("kobject: Make support for uevent_helper
optional.").  However, if was still left enabled by default, to support
ancient userland.

Time passed by, and nothing should use this anymore, so it can be
disabled by default.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01 07:37:12 +02:00
Linus Torvalds e42091739f Device properties framework fix for 5.1-rc2
Add missing "static" in two places (YueHaibing).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJclLUIAAoJEILEb/54YlRxR0MP/Ro9LYjcGPl+a/pw0SgmrDb6
 DQZnO91QRcVc24wI8xRir/F4owqLW+niyYlBpAuZAwA9iUo0tgijecLnuAedE06E
 cTJ1CL1ahP7NjxKLP37li2Lr3ppZS9rWtddLN1qpcOKO8uIH+LUCnt9lkl/n58pv
 sINOJDo6tEMcgC2Ar16CqYwHqDyj35t9MRoZsOM3G3W6NwyIE2uGBnu0wd0o0QPU
 Y3aMLe0308eWzPRJsae/AN5tLsz58JwTqdxSWHFi3AyIzUo7XxLQZBznZpct9loF
 /68UeObdLDNsK63S0tKFTa14TeS7pKiw7BJZKzxVqSKCOPSF19ZQg/NoZm34nhZI
 OVSUUoyVaJRWXwyJF7+lHL2GVXeqSNDKa3TcnwedqDUDUxBkUuoO9f9qVlqy6dDV
 i3AUFqZI/SXAs+V5YItt/nXrzMoN6HXtPAcXYINJLlrGEJiMmbCANUljPrg/Ov4Q
 YmgZxI+q52JeaDtblyLi4uqD4T3Pu/+Q2IibXtmKM699aPEYhhdakMPxv/8CEcUQ
 BWt2HiBCEfhTz1pkUJGO4jIZQbhTv9WhEWBFD5crcz0zBU9U/K/u77hTKjZzIVC3
 D4fiNbIfvYgvrNV4N+EcrkbasoLvHQJ/rXdbHBHzrZTnBATsDgAOHbNZGY8FsmTX
 g1LRFWDXYsE7NHmB7L9T
 =CRNg
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework fix from Rafael Wysocki:
 "Add missing 'static' in two places (YueHaibing)"

* tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  drivers: base: swnode: Make two functions static
2019-03-22 12:08:52 -07:00
Lucas Tanure cc6a8d69ba
regmap: debugfs: Jump to the next readable register
Improve the speed of the loop jumping to the next
available register

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20 17:13:31 +00:00
Jiada Wang 2071ac985d PM / Domains: Avoid a potential deadlock
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock
the deadlock scenario is like following:
First thread is probing cs2000
cs2000_probe()
  clk_register()
    __clk_core_init()
      clk_prepare_lock()                            ----> acquires prepare_lock
        cs2000_recalc_rate()
          i2c_smbus_read_byte_data()
            rcar_i2c_master_xfer()
              dma_request_chan()
                rcar_dmac_of_xlate()
                  rcar_dmac_alloc_chan_resources()
                    pm_runtime_get_sync()
                      __pm_runtime_resume()
                        rpm_resume()
                          rpm_callback()
                            genpd_runtime_resume()   ----> acquires genpd->mlock

Second thread is attaching any device to the same PM domain
genpd_add_device()
  genpd_lock()                                       ----> acquires genpd->mlock
    cpg_mssr_attach_dev()
      of_clk_get_from_provider()
        __of_clk_get_from_provider()
          __clk_create_clk()
            clk_prepare_lock()                       ----> acquires prepare_lock

Since currently no PM provider access genpd's critical section
in .attach_dev, and .detach_dev callbacks, so there is no need to protect
these two callbacks with genpd->mlock.
This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev
from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired
in .attach_dev and .detach_dev

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19 22:58:04 +01:00
YueHaibing 0e3edd9444 drivers: base: swnode: Make two functions static
Fix sparse warning:

drivers/base/swnode.c:475:22: warning: symbol 'software_node_get_parent' was not declared. Should it be static?
drivers/base/swnode.c:484:22: warning: symbol 'software_node_get_next_child' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19 16:37:56 +01:00
Lucas Tanure a1c67d65df
regmap: debugfs: Replace code by already existing function
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-19 13:08:41 +00:00
Linus Torvalds f67e3fb489 device-dax for 5.1
* Replace the /sys/class/dax device model with /sys/bus/dax, and include
   a compat driver so distributions can opt-in to the new ABI.
 
 * Allow for an alternative driver for the device-dax address-range
 
 * Introduce the 'kmem' driver to hotplug / assign a device-dax
   address-range to the core-mm.
 
 * Arrange for the device-dax target-node to be onlined so that the newly
   added memory range can be uniquely referenced by numa apis.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJchWpGAAoJEB7SkWpmfYgCJk8P/0Q1DINszUDO/vKjJ09cDs9P
 Jw3it6GBIL50rDOu9QdcprSpwYDD0h1mLAV/m6oa3bVO+p4uWGvnxaxRx2HN2c/v
 vhZFtUDpHlqR63vzWMNVKRprYixCRJDUr6xQhhCcE3ak/ELN6w7LWfikKVWv15UL
 MfR96IQU38f+xRda/zSXnL9606Dvkvu/inEHj84lRcHIwj3sQAUalrE8bR3O32gZ
 bDg/l5kzT49o8ZXUo/TegvRSSSZpJmOl2DD0RW+ax5q3NI2bOXFrVDUKBKxf/hcQ
 E/V9i57TrqQx0GqRhnU7rN/v53cFZGGs31TEEIB/xs3bzCnADxwXcjL5b5K005J6
 vJjBA2ODBewHFK3uVx46Hy1iV4eCtZWj4QrMnrjdSrjXOfbF5GTbWOhPFgoq7TWf
 S7VqFEf3I2gDPaMq4o8Ej1kLH4HMYeor2NSOZjyvGn87rSZ3ZIQguwbaNIVl+itz
 gdDt0ZOU0BgOBkV+rZIeZDaGdloWCHcDPL15CkZaOZyzdWhfEZ7dod6ad+9udilU
 EUPH62RgzXZtfm5zpebYyjNVLbb9pLZ0nT+UypyGR6zqWx1SqU3mXi63NFXPco+x
 XA9j//edPeI6NHg2CXLEh8DLuCg3dG1zWRJANkiF+niBwyCR8CHtGWAoY6soXbKe
 2UrXGcIfXxyJ8V9v8v4q
 =hfa3
 -----END PGP SIGNATURE-----

Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull device-dax updates from Dan Williams:
 "New device-dax infrastructure to allow persistent memory and other
  "reserved" / performance differentiated memories, to be assigned to
  the core-mm as "System RAM".

  Some users want to use persistent memory as additional volatile
  memory. They are willing to cope with potential performance
  differences, for example between DRAM and 3D Xpoint, and want to use
  typical Linux memory management apis rather than a userspace memory
  allocator layered over an mmap() of a dax file. The administration
  model is to decide how much Persistent Memory (pmem) to use as System
  RAM, create a device-dax-mode namespace of that size, and then assign
  it to the core-mm. The rationale for device-dax is that it is a
  generic memory-mapping driver that can be layered over any "special
  purpose" memory, not just pmem. On subsequent boots udev rules can be
  used to restore the memory assignment.

  One implication of using pmem as RAM is that mlock() no longer keeps
  data off persistent media. For this reason it is recommended to enable
  NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
  at rest. We considered making this recommendation an actively enforced
  requirement, but in the end decided to leave it as a distribution /
  administrator policy to allow for emulation and test environments that
  lack security capable NVDIMMs.

  Summary:

   - Replace the /sys/class/dax device model with /sys/bus/dax, and
     include a compat driver so distributions can opt-in to the new ABI.

   - Allow for an alternative driver for the device-dax address-range

   - Introduce the 'kmem' driver to hotplug / assign a device-dax
     address-range to the core-mm.

   - Arrange for the device-dax target-node to be onlined so that the
     newly added memory range can be uniquely referenced by numa apis"

NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.

And apparently the PMEM modules can cause that a lot more than regular
RAM.  The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.

Quoting Dan from another email:
 "The exposure can be reduced in the volatile-RAM case by scanning for
  and clearing errors before it is onlined as RAM. The userspace tooling
  for that can be in place before v5.1-final. There's also runtime
  notifications of errors via acpi_nfit_uc_error_notify() from
  background scrubbers on the DIMM devices. With that mechanism the
  kernel could proactively clear newly discovered poison in the volatile
  case, but that would be additional development more suitable for v5.2.

  I understand the concern, and the need to highlight this issue by
  tapping the brakes on feature development, but I don't see PMEM as RAM
  making the situation worse when the exposure is also there via DAX in
  the PMEM case. Volatile-RAM is arguably a safer use case since it's
  possible to repair pages where the persistent case needs active
  application coordination"

* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: "Hotplug" persistent memory for use like normal RAM
  mm/resource: Let walk_system_ram_range() search child resources
  mm/memory-hotplug: Allow memory resources to be children
  mm/resource: Move HMM pr_debug() deeper into resource code
  mm/resource: Return real error codes from walk failures
  device-dax: Add a 'modalias' attribute to DAX 'bus' devices
  device-dax: Add a 'target_node' attribute
  device-dax: Auto-bind device after successful new_id
  acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
  device-dax: Add /sys/class/dax backwards compatibility
  device-dax: Add support for a dax override driver
  device-dax: Move resource pinning+mapping into the common driver
  device-dax: Introduce bus + driver model
  device-dax: Start defining a dax bus model
  device-dax: Remove multi-resource infrastructure
  device-dax: Kill dax_region base
  device-dax: Kill dax_region ida
2019-03-16 13:05:32 -07:00
Linus Torvalds 9352ca585b Additional power management updates for 5.1-rc1
- Fix registration of new cpuidle governors partially broken during
    the 5.0 development cycle by mistake (Rafael Wysocki).
 
  - Avoid integer overflows in the menu cpuidle governor by making
    it discard the overflowing data points upfront (Rafael Wysocki).
 
  - Fix minor mistake in the recent update of the iowait boost
    computation in the intel_pstate driver (Rafael Wysocki).
 
  - Drop incorrect __init annotation from one function in the pxa2xx
    cpufreq driver (Arnd Bergmann).
 
  - Fix the operating performance points (OPP) framework
    initialization for devices in multiple power domains if
    only one of them is scalable (Rajendra Nayak).
 
  - Fix mistake in dev_pm_opp_set_rate() which causes it to skip
    updating the performance state if the new frequency is the same
    as the old one (Viresh Kumar).
 
  - Rework the cancellation of wakeup source timers to avoid
    potential issues with it and do some cleanups unlocked by
    that change (Viresh Kumar, Rafael Wysocki).
 
  - Clean up the code computing the active/suspended time of devices
    in the PM-runtime framework after recent changes (Ulf Hansson).
 
  - Make the power management infrastructure code use pr_fmt()
    consistently (Joe Perches).
 
  - Clean up the generic power domains (genpd) framework somewhat
    (Aisheng Dong).
 
  - Improve kerneldoc comments for two functions in the cpufreq core
    (Rafael Wysocki).
 
  - Fix typo in a PM QoS file description comment (Aisheng Dong).
 
  - Update the handling of CPU boost frequencies in the cpupower
    utility (Abhishek Goel).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcija/AAoJEILEb/54YlRx7O8P/AlxJK8EKVkLq6/zIh/TcvQm
 G7LclduUtOQ6punqh/NFHPLWnazIO3/Rg1ApqApEn4SheYzrINix76gAd0cYvYHA
 /ZfkscQ0SeMjT6w1fVJ55ubKcJUQXrUxXzBaBdo0Z33FBBLxh9seJXQVF3ZSuahQ
 RhdrSoCtZEI7pHuCY91LanfL1LmHpApSLKcpPvCjvtwj2rm3L8zDFwYsuArbNCX+
 yvzhGJZ/vQFo5gJbf6M9msgtx2AfryHR3fgtM/RZhwI+7qPIuzFanuAydxBxgstT
 wmzpv2y3lvIv/y3q5SDt0LhEzcuUXtNZLpM1AGAlogo9ZgvhtjUpK+Gjkpn9g01r
 Y8qv+8BOL2PSrfZVyLXyyA8oRiDxbYlGQmoRy89zq9ukQorOhJ4kv+wApOq88krA
 AFZPMHTBFCqH9GHeUIOfGZN15/r3GCBGC8D0G8kl8MUI6cFlV85uliAJcuS3/A3s
 Z+xAfC/75ue2vlXhF8iiWnRuya5LRLwdwmMdlAWeguTLqNF3RlwlOroR7RTx9f8j
 sBauXyRO9ovxbfbmBqFIFWU1yBIMd3hU+XU47xjvvDdoKTl/TpgXT+AEofBaMokl
 rFbnK2LsVn3H5wXKD0CaH71qxiF/Q8g7BuoXc4SqWYI8N/pbQe+WEYoRvrb2NYkr
 gpkTZmNUXrDXu/9ypEoR
 =fHRq
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups on top of the previously merged
  power management material for 5.1-rc1 with one cpupower utility update
  that wasn't pushed earlier due to unfortunate timing.

  Specifics:

   - Fix registration of new cpuidle governors partially broken during
     the 5.0 development cycle by mistake (Rafael Wysocki).

   - Avoid integer overflows in the menu cpuidle governor by making it
     discard the overflowing data points upfront (Rafael Wysocki).

   - Fix minor mistake in the recent update of the iowait boost
     computation in the intel_pstate driver (Rafael Wysocki).

   - Drop incorrect __init annotation from one function in the pxa2xx
     cpufreq driver (Arnd Bergmann).

   - Fix the operating performance points (OPP) framework initialization
     for devices in multiple power domains if only one of them is
     scalable (Rajendra Nayak).

   - Fix mistake in dev_pm_opp_set_rate() which causes it to skip
     updating the performance state if the new frequency is the same as
     the old one (Viresh Kumar).

   - Rework the cancellation of wakeup source timers to avoid potential
     issues with it and do some cleanups unlocked by that change (Viresh
     Kumar, Rafael Wysocki).

   - Clean up the code computing the active/suspended time of devices in
     the PM-runtime framework after recent changes (Ulf Hansson).

   - Make the power management infrastructure code use pr_fmt()
     consistently (Joe Perches).

   - Clean up the generic power domains (genpd) framework somewhat
     (Aisheng Dong).

   - Improve kerneldoc comments for two functions in the cpufreq core
     (Rafael Wysocki).

   - Fix typo in a PM QoS file description comment (Aisheng Dong).

   - Update the handling of CPU boost frequencies in the cpupower
     utility (Abhishek Goel)"

* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: governor: Add new governors to cpuidle_governors again
  cpufreq: intel_pstate: Fix up iowait_boost computation
  PM / OPP: Update performance state when freq == old_freq
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor
  OPP: Fix handling of multiple power domains
  PM / QoS: Fix typo in file description
  cpufreq: pxa2xx: remove incorrect __init annotation
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time
  PM: Add and use pr_fmt()
  cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
  cpuidle: menu: Avoid overflows when computing variance
  tools/power/cpupower: Display boost frequency separately
2019-03-14 10:30:06 -07:00
Rafael J. Wysocki 75f3e23954 Merge branch 'pm-domains'
* pm-domains:
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor
2019-03-14 10:53:08 +01:00
Rafael J. Wysocki e6035258db Merge branches 'pm-core', 'pm-sleep' and 'pm-qos'
* pm-core:
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time

* pm-sleep:
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation

* pm-qos:
  PM / QoS: Fix typo in file description
2019-03-14 10:51:38 +01:00
Rafael J. Wysocki 623217a0cc PM / wakeup: Drop wakeup_source_drop()
After commit d856f39ac1cc ("PM / wakeup: Rework wakeup source timer
cancellation") wakeup_source_drop() is a trivial wrapper around
__pm_relax() and it has no users except for wakeup_source_destroy()
and wakeup_source_trash() which also has no users, so drop it along
with the latter and make wakeup_source_destroy() call __pm_relax()
directly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-03-12 09:43:00 +01:00
Viresh Kumar 1fad17fb1b PM / wakeup: Rework wakeup source timer cancellation
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.

To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().

Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12 09:40:48 +01:00
Aisheng Dong d9dfca7f81 PM / domains: Remove one unnecessary blank line
Remove one unnecessary blank line

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11 11:26:45 +01:00
Aisheng Dong 0cec68a977 PM / Domains: Return early for all errors in _genpd_power_off()
It is strange to only return early for -EBUSY state and left other
errors to be still measured execution time.

As for error cases, the elapsed_ns computed actually is not quite
accurate and meaningful for governor to use. So let's simply return
for all error cases.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11 11:26:45 +01:00
Aisheng Dong 46b7fe9499 PM / Domains: Improve warn for multiple states but no governor
It's possible a PM domain defines only one state and it does not need
a governor to work. For such case, a warning actually is not necessary.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11 11:26:45 +01:00
Aisheng Dong 07a6c71bbd PM / QoS: Fix typo in file description
Fix a typo in the file description comment.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11 10:35:53 +01:00
Linus Torvalds b7a7d1c1ec DMA mapping updates for 5.1
- add debugfs support for dumping dma-debug information (Corentin Labbe)
  - Kconfig cleanups (Andy Shevchenko and me)
  - debugfs cleanups (Greg Kroah-Hartman)
  - improve dma_map_resource and use it in the media code
  - arch_setup_dma_ops / arch_teardown_dma_ops cleanups
  - various small cleanups and improvements for the per-device coherent
    allocator
  - make the DMA mask an upper bound and don't fail "too large" dma mask
    in the remaning two architectures - this will allow big driver
    cleanups in the following merge windows
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlyCKUgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYP1vA//WNK5cxQVGZZsmsmkcNe3sCaJCZD4MpVpq/D+l87t
 3j1C1qmduOPyI1m061niYk7j4B4DeyeLs+XOeUsl5Yz+FqVvDICuNHXXJQSUr3Ao
 JbMfBis8Ne65Eyz0xxBltCWM7WiE6fdo7AGoR4Bzj3+f4xGOOazkRy4R6r67bU6x
 v3R5dTvfbSlvvKhn+j8ksAEYb+WPUmr6Z2dnlF0mShnOCpZVy0wd0M1gtEFKrVHx
 zKz9/va4/7yEcpdVqNtSDlHIsSZcFE3ZfTRWq6ZtBoRN+gNwrI0YylY7HtCfJWZG
 IxMiuQ+8SHGE8+NI2d56bs4MsHbqPBRSuadJNuZaTzdxs6FDTEnlCDeXwGF1cHf2
 qhVMfn17V4TZNT4NAd2wHa60cjTMoqraWeS06/b2tyXTF0uxyWj0BCjaHNJa+Ayc
 KCulq1n2LmTDiOGnZJT7Oui6PO5etOHAmvgMQumBNkzQJbPGvuiYGgsciYAMSmuy
 NccIrghQzR9BlG6U1srzTiGQJnpm38x1hWphtU6gQPwz5iKt3FBAfEWCic8U81QE
 JKSwoYv/5ChO+sy9880t/FLO8hn/7L55IOdZEfGkQ22gFzf3W5f9v2jFQc8XN2BO
 Fc6EjWERrmTzUi0f1Ooj3VPRtWuZq86KqlKByy6iZ5eXwxpGE1M0HZVoHYCW+aDd
 MYc=
 =nAMI
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:

 - add debugfs support for dumping dma-debug information (Corentin
   Labbe)

 - Kconfig cleanups (Andy Shevchenko and me)

 - debugfs cleanups (Greg Kroah-Hartman)

 - improve dma_map_resource and use it in the media code

 - arch_setup_dma_ops / arch_teardown_dma_ops cleanups

 - various small cleanups and improvements for the per-device coherent
   allocator

 - make the DMA mask an upper bound and don't fail "too large" dma mask
   in the remaning two architectures - this will allow big driver
   cleanups in the following merge windows

* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
  Documentation/DMA-API-HOWTO: update dma_mask sections
  sparc64/pci_sun4v: allow large DMA masks
  sparc64/iommu: allow large DMA masks
  sparc64: refactor the ali DMA quirk
  ccio: allow large DMA masks
  dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
  dma-mapping: remove dma_mark_declared_memory_occupied
  dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
  dma-mapping: improve selection of dma_declare_coherent availability
  dma-mapping: remove an incorrect __iommem annotation
  of: select OF_RESERVED_MEM automatically
  device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
  mfd/sm501: depend on HAS_DMA
  dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
  dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
  dma-mapping: move debug configuration options to kernel/dma
  dma-debug: add dumping facility via debugfs
  dma: debug: no need to check return value of debugfs_create functions
  videobuf2: replace a layering violation with dma_map_resource
  dma-mapping: don't BUG when calling dma_map_resource on RAM
  ...
2019-03-10 11:54:48 -07:00
Linus Torvalds 3601fe43e8 This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
 
 - The big change this time around is the irqchip handling in
   the qualcomm pin controllers, closely coupled with the
   gpiochip. This rework, in a classic fall-between-the-chairs
   fashion has been sidestepped for too long. The Qualcomm
   IRQchips using the SPMI and SSBI transport mechanisms have
   been rewritten to use hierarchical irqchip. This creates
   the base from which I intend to gradually pull support for
   hierarchical irqchips into the gpiolib irqchip helpers to
   cut down on duplicate code. We have too many hacks in the
   kernel because people have been working around the missing
   hierarchical irqchip for years, and once it was there,
   noone understood it for a while. We are now slowly adapting
   to using it. This is why this pull requests include changes
   to MFD, SPMI, IRQchip core and some ARM Device Trees
   pertaining to the Qualcomm chip family. Since Qualcomm have
   so many chips and such large deployments it is paramount
   that this platform gets this right, and now it (hopefully)
   does.
 
 - Core support for pull-up and pull-down configuration, also
   from the device tree. When a simple GPIO chip support a
   "off or on" pull-up or pull-down resistor, we provide a
   way to set this up using machine descriptors or device tree.
   If more elaborate control of pull up/down (such as
   resistance shunt setting) is required, drivers should be
   phased over to use pin control. We do not yet provide a
   userspace ABI for this pull up-down setting but I suspect
   the makers are going to ask for it soon enough. PCA953x
   is the first user of this new API.
 
 - The GPIO mockup driver has been revamped after some
   discussion improving the IRQ simulator in the process.
   The idea is to make it possible to use the mockup for
   both testing and virtual prototyping, e.g. when you do
   not yet have a GPIO expander to play with but really
   want to get something to develop code around before
   hardware is available. It's neat. The blackbox testing
   usecase is currently making its way into kernelci.
 
 - ACPI GPIO core preserves non direction flags when updating
   flags.
 
 - A new device core helper for devm_platform_ioremap_resource()
   is funneled through the GPIO tree with Greg's ACK.
 
 New drivers:
 
 - TQ-Systems QTMX86 GPIO controllers (using port-mapped
   I/O)
 
 - Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
 
 - AMD G-Series PCH (Platform Controller Hub) GPIO driver.
 
 - Fintek F81804 & F81966 subvariants.
 
 - PCA953x now supports NXP PCAL6416.
 
 Driver improvements:
 
 - IRQ support on the Nintendo Wii (Hollywood) GPIO.
 
 - get_direction() support for the MVEBU driver.
 
 - Set the right output level on SAMA5D2.
 
 - Drop the unused irq trigger setting on the Spreadtrum
   driver.
 
 - Wakeup support for PCA953x.
 
 - A slew of cleanups in the various Intel drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcgoLEAAoJEEEQszewGV1zjBAP/3OmTFGv49PFmJwSx+PlLiYf
 V6/UPaQzq81CGSMtHxbS51TyP9Id7PCfsacbuFYutzn0D1efvl7jrkb8qJ6fVvCM
 bl/i6q8ipRTPzAf1hD3QCgCe3BXCA064/OcPrz987oIvI3bJQXsmBjBSXHWr4Cwa
 WfB5DX/afn9TK3XHhMQGfw5f0d+TtnKAs90RTTVKiz9Ow8eFYZJOhgPkvhCR3Gi9
 YJIzIAiwhHZ7/zauo4JAYFU/O/Z3YEC5zeLne2ItebzNooRkSxdz0c9Hs7HlCZmU
 930Uv9jNN89N3vPqpZzAHtPvwDOmAILMWvKy9xRSp+eoIukarRJgF7ALPk7QWxK1
 yy+tGj4dXBQ6tI8W3wUN1WgjNpii3K1HbJ+1LQVQL2/q9o+3YXXqmjdjuw7C8YYV
 5ystNrUppkgfIIciHL4lhqw3wKJJhVEAns2V245hIitoShT+RvIg8GQbGZmWlQFd
 YsHbynqHL9iwfRNv26kEqZXZOo/4D1t6Scw+OPVyba2Wyttf+qbmg+XaYMqFaxYW
 mfydvdtymeCOUIPJMzw58KGPUTXJ4UPLENyayXNUHokr1a8VO8OIthY7zwi0CpvJ
 IcsAY9zoGxvfbRV922mlIsw3oOBcM2IN2lC9sY469ZVnjBrdC3rsQpIBZr+Vzz8i
 YlUfXLSGSyuUZUz//2eG
 =VoVC
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.1 cycle:

  Core changes:

   - The big change this time around is the irqchip handling in the
     qualcomm pin controllers, closely coupled with the gpiochip. This
     rework, in a classic fall-between-the-chairs fashion has been
     sidestepped for too long.

     The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
     have been rewritten to use hierarchical irqchip. This creates the
     base from which I intend to gradually pull support for hierarchical
     irqchips into the gpiolib irqchip helpers to cut down on duplicate
     code.

     We have too many hacks in the kernel because people have been
     working around the missing hierarchical irqchip for years, and once
     it was there, noone understood it for a while. We are now slowly
     adapting to using it.

     This is why this pull requests include changes to MFD, SPMI,
     IRQchip core and some ARM Device Trees pertaining to the Qualcomm
     chip family. Since Qualcomm have so many chips and such large
     deployments it is paramount that this platform gets this right, and
     now it (hopefully) does.

   - Core support for pull-up and pull-down configuration, also from the
     device tree. When a simple GPIO chip supports an "off or on" pull-up
     or pull-down resistor, we provide a way to set this up using
     machine descriptors or device tree.

     If more elaborate control of pull up/down (such as resistance shunt
     setting) is required, drivers should be phased over to use pin
     control. We do not yet provide a userspace ABI for this pull
     up-down setting but I suspect the makers are going to ask for it
     soon enough. PCA953x is the first user of this new API.

   - The GPIO mockup driver has been revamped after some discussion
     improving the IRQ simulator in the process.

     The idea is to make it possible to use the mockup for both testing
     and virtual prototyping, e.g. when you do not yet have a GPIO
     expander to play with but really want to get something to develop
     code around before hardware is available. It's neat. The blackbox
     testing usecase is currently making its way into kernelci.

   - ACPI GPIO core preserves non direction flags when updating flags.

   - A new device core helper for devm_platform_ioremap_resource() is
     funneled through the GPIO tree with Greg's ACK.

  New drivers:

   - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)

   - Gateworks PLD GPIO driver (vaccumed up from OpenWrt)

   - AMD G-Series PCH (Platform Controller Hub) GPIO driver.

   - Fintek F81804 & F81966 subvariants.

   - PCA953x now supports NXP PCAL6416.

  Driver improvements:

   - IRQ support on the Nintendo Wii (Hollywood) GPIO.

   - get_direction() support for the MVEBU driver.

   - Set the right output level on SAMA5D2.

   - Drop the unused irq trigger setting on the Spreadtrum driver.

   - Wakeup support for PCA953x.

   - A slew of cleanups in the various Intel drivers"

* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
  gpio: gpio-omap: fix level interrupt idling
  gpio: amd-fch: Set proper output level for direction_output
  x86: apuv2: remove unused variable
  gpio: pca953x: Use PCA_LATCH_INT
  platform/x86: fix PCENGINES_APU2 Kconfig warning
  gpio: pca953x: Fix dereference of irq data in shutdown
  gpio: amd-fch: Fix type error found by sparse
  gpio: amd-fch: Drop const from resource
  gpio: mxc: add check to return defer probe if clock tree NOT ready
  gpio: ftgpio: Register per-instance irqchip
  gpio: ixp4xx: Add DT bindings
  x86: pcengines apuv2 gpio/leds/keys platform driver
  gpio: AMD G-Series PCH gpio driver
  drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
  gpio: tqmx86: Set proper output level for direction_output
  gpio: sprd: Change to use SoC compatible string
  gpio: sprd: Use SoC compatible string instead of wildcard string
  gpio: of: Handle both enable-gpio{,s}
  gpio: of: Restrict enable-gpio quirk to regulator-gpio
  gpio: davinci: use devm_platform_ioremap_resource()
  ...
2019-03-08 10:09:53 -08:00
Ulf Hansson 0996584b30 PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
Avoid the open-coding of the accounted time acquisition in
runtime_active|suspend_time_show() and make them call
pm_runtime_active|suspended_time() instead.

Note that this change also indirectly avoids holding dev->power.lock
around the do_div() computation and the sprintf() call which is an
additional improvement.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07 11:23:17 +01:00
Ulf Hansson fdc56c0732 PM-runtime: Consolidate code to get active/suspended time
In a step to consolidate the code for fetching the PM-runtime
active/suspended time for a device, add a common function for that
and make the existing pm_runtime_suspended_time() call it.

Also add a corresponding pm_runtime_active_time() calling the new
common function.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog, function rename ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07 11:23:17 +01:00
Joe Perches 7a5bd1279b PM: Add and use pr_fmt()
Prefix all printk/pr_<level> messages with "PM: " to make the
logging a bit more consistent.

Miscellanea:

 o Convert a few printks to pr_<level>
 o Whitespace to align to open parentheses
 o Remove embedded "PM: " from pr_debugs as pr_fmt adds it

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07 11:02:02 +01:00
Linus Torvalds f90d64483e USB/PHY patches for 5.1-rc1
Here is the big USB/PHY driver pull request for 5.1-rc1.
 
 The usual set of gadget driver updates, phy driver updates (you will
 have a merge issue with Kconfig and Makefile), xhci updates, and typec
 additions.  Also included in here are a lot of small cleanups and fixes
 and driver updates where needed.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia
 8FTdneQfN2J8Hhc6KGXE
 =Kx9I
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver pull request for 5.1-rc1.

  The usual set of gadget driver updates, phy driver updates, xhci
  updates, and typec additions. Also included in here are a lot of small
  cleanups and fixes and driver updates where needed.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  wusb: Remove unnecessary static function ckhdid_printf
  usb: core: make default autosuspend delay configurable
  usb: core: Fix typo in description of "authorized_default"
  usb: chipidea: Refactor USB PHY selection and keep a single PHY
  usb: chipidea: Grab the (legacy) USB PHY by phandle first
  usb: chipidea: imx: set power polarity
  dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
  usb: chipidea: imx: remove unused header files
  usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
  usb: core: add option of only authorizing internal devices
  usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
  usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
  usb: xhci: fix build warning - missing prototype
  usb: xhci: dbc: Fixing typo error.
  usb: xhci: remove unused member 'parent' in xhci_regset struct
  xhci: tegra: Prevent error pointer dereference
  USB: serial: option: add Telit ME910 ECM composition
  usb: core: Replace hardcoded check with inline function from usb.h
  usb: core: skip interfaces disabled in devicetree
  usb: typec: mux: remove redundant check on variable match
  ...
2019-03-06 16:48:27 -08:00
Linus Torvalds e431f2d74e Driver core patches for 5.1-rc1
Here is the big driver core patchset for 5.1-rc1
 
 More patches than "normal" here this merge window, due to some work in
 the driver core by Alexander Duyck to rework the async probe
 functionality to work better for a number of devices, and independant
 work from Rafael for the device link functionality to make it work
 "correctly".
 
 Also in here is:
 	- lots of BUS_ATTR() removals, the macro is about to go away
 	- firmware test fixups
 	- ihex fixups and simplification
 	- component additions (also includes i915 patches)
 	- lots of minor coding style fixups and cleanups.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
 ep8g+6oRLxJy414hogxQ
 =bLs2
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...
2019-03-06 14:52:48 -08:00
Linus Torvalds 45763bf4bc Char/Misc driver patches for 5.1-rc1
Here is the big char/misc driver patch pull request for 5.1-rc1.
 
 The largest thing by far is the new habanalabs driver for their AI
 accelerator chip.  For now it is in the drivers/misc directory but will
 probably move to a new directory soon along with other drivers of this
 type.
 
 Other than that, just the usual set of individual driver updates and
 fixes.  There's an "odd" merge in here from the DRM tree that they asked
 me to do as the MEI driver is starting to interact with the i915 driver,
 and it needed some coordination.  All of those patches have been
 properly acked by the relevant subsystem maintainers.
 
 All of these have been in linux-next with no reported issues, most for
 quite some time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
 9e3l7H76oe33o96Qjhor
 =8A2k
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...
2019-03-06 14:18:59 -08:00
Linus Torvalds 542d0e583b Device properties framework updates for 5.1-rc1
Fix the length value used in the PROPERTY_ENTRY_STRING() macro and
 make software nodes use the get_named_child_node() fwnode callback
 (Heikki Krogerus).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfSKaAAoJEILEb/54YlRxXpwP/Rs1YQwpx1gZwSxERMBrarc3
 ifbi8cvCzVcryO+nup6vTxci9BxX3LHf6tzB8c9PCYezaOcZYZwBhNGr0w3W2GK6
 FomuNeQ3KIgzsLgBEdfL8xtHbb3DB7PrfWRj6zvkzX1P0tjcVV5QQNd+thqt6Bd1
 8igWVrnjR9a8hlQ/lHKSU8LZPEyA8IiJviwBpd+22CuGtwNSRa+ShUdqmz26pY+R
 Ias7/0EDUSSW7OdVfGn6NFDz3lGccQZ3CQ3ZwkRSvjdAg8oe0bbnn3ymQgOX7bfx
 KmWXbsO4vXw0KArnf6/hwYJdubJuUjFMEQ7QKSDP9UYNCEz4qZn2Gr0RLUAK06NC
 7oklm0ThYn88o5RHXWTmHU4rmJ6WBKp8cyr5e/KGkDKFPexZmpKW6r7zkX6DWAWp
 o8Rg/Q2qx+ygqziME/122UyQpnvufdpZrg14fnx0Cohqpc3Hzg+6vgv1mZ5/NM7F
 fDVy5D5sfpWVNZ07ZuBQQvDaKHzMFifChco1OymsS9X5PyUbNv+0t+t7KQeVbc06
 0zE2W+E3owrQA1OiRuJPoENvV/1mngm0q9XdOn1BHheVo8XOqcpB8hoC8B7VzUSa
 2ZVKmSro/vwAsTh/sizkrLTDkZ+200tfXTUDdBW2u/nPX8K4zebSFRw0DPfIOnUU
 09VWcJVrRve6AmbRG0U+
 =JlFr
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "Fix the length value used in the PROPERTY_ENTRY_STRING() macro and
  make software nodes use the get_named_child_node() fwnode callback
  (Heikki Krogerus)"

* tag 'devprop-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Implement get_named_child_node fwnode callback
  device property: Fix the length used in PROPERTY_ENTRY_STRING()
2019-03-06 13:49:54 -08:00
Linus Torvalds ef8006846a Power management updates for 5.1-rc1
- Update the PM-runtime framework to use ktime instead of
    jiffies for accounting (Thara Gopinath, Vincent Guittot).
 
  - Optimize the autosuspend code in the PM-runtime framework
    somewhat (Ladislav Michl).
 
  - Add a PM core flag to mark devices that don't need any form of
    power management (Sudeep Holla).
 
  - Introduce driver API documentation for cpuidle and add a new
    cpuidle governor for tickless systems (Rafael Wysocki).
 
  - Add Jacobsville support to the intel_idle driver (Zhang Rui).
 
  - Clean up a cpuidle core header file and the cpuidle-dt and ACPI
    processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam).
 
  - Add new cpufreq driver for Armada 8K (Gregory Clement).
 
  - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar,
    Amit Kucheria).
 
  - Add support for light-weight tear-down and bring-up of CPUs to the
    cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar).
 
  - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
    auto-registration to the cpufreq core and use it in multiple
    cpufreq drivers (Amit Kucheria).
 
  - Fix some minor issues and do some cleanups in the davinci,
    e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
    (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
    Taniya Das, Viresh Kumar).
 
  - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
    Wang).
 
  - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
    Rafael Wysocki).
 
  - Clean up multiple cpufreq drivers (Yangtao Li).
 
  - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
    Bulwahn).
 
  - Add support for exposing the Energy Model via debugfs and make
    multiple cpufreq drivers register an Energy Model to support
    energy-aware scheduling (Quentin Perret, Dietmar Eggemann,
    Matthias Kaehlcke).
 
  - Add Ice Lake mobile and Jacobsville support to the Intel RAPL
    power-capping driver (Gayatri Kammela, Zhang Rui).
 
  - Add a power estimation helper to the operating performance points
    (OPP) framework and clean up a core function in it (Quentin Perret,
    Viresh Kumar).
 
  - Make minor improvements in the generic power domains (genpd), OPP
    and system suspend frameworks and in the PM core (Aditya Pakki,
    Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfSGlAAoJEILEb/54YlRxikwP/1rQ9+HqDmDUvO2QeYREGO/m
 R4kK+iUQW7O4ZJzsSvoGyuKCl7c2ANPlJWmbsEZKbevpKZ4XuUcv/CJDqKD1izV7
 hfsQyum34ePSCUEMf6CpMAGAkdmK//NVysHiLXZ4j1hhzi6gA6Cm50qyNZ8xX6kF
 Ri6zYG5x7nhn/o/l569FDe+K5W/LDDaZUmvr858pPsrZZR5c4p3ylq+HBrZt0FPQ
 70D+u7RcT5v3DQLTghNrgHHiOJ0/DQM43I7aZvkKM3JA8BCDou/Nvq+gH0C0YUP0
 QE+oFK9C8CBPEz9N9cSMTb0+S78GQNB0GntJPDN3QQFCHRe6EYKUtu6CvllIE1v9
 5pFfagXGVi9UmShu80v+qGGUILVK1ZJ5fjSyxx4UcneTsarNJZg7Y7d72mrX+0zi
 J3KodcqQi295jNq9P55K/9XtAiRdpRR6bQzXBtrprpw8PA94yqBHPpxbD32Wl05/
 U2+ss/SNyMAzhsP9kqzxSxPBlTFek/ArxZm0Uk4kHt75gkl09CG64r+6OG8gLtwD
 Skkr02AeYvx6fx0kFnKIS4sc2c2/8xW3FUtHlv+TDPvuzCEaL0ooqsWgt7rcwlmg
 Xz5ufXbEIiVSlLlH/YGZxbgy+WfIzYA5WMpYrA1Givn8s5jI9Sm+ROD2qhOKA2n4
 aekEDkum/bxVVeykZaXy
 =TSKG
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These are PM-runtime framework changes to use ktime instead of jiffies
  for accounting, new PM core flag to mark devices that don't need any
  form of power management, cpuidle updates including driver API
  documentation and a new governor, cpufreq updates including a new
  driver for Armada 8K, thermal cleanups and more, some energy-aware
  scheduling (EAS) enabling changes, new chips support in the intel_idle
  and RAPL drivers and assorted cleanups in some other places.

  Specifics:

   - Update the PM-runtime framework to use ktime instead of jiffies for
     accounting (Thara Gopinath, Vincent Guittot)

   - Optimize the autosuspend code in the PM-runtime framework somewhat
     (Ladislav Michl)

   - Add a PM core flag to mark devices that don't need any form of
     power management (Sudeep Holla)

   - Introduce driver API documentation for cpuidle and add a new
     cpuidle governor for tickless systems (Rafael Wysocki)

   - Add Jacobsville support to the intel_idle driver (Zhang Rui)

   - Clean up a cpuidle core header file and the cpuidle-dt and ACPI
     processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)

   - Add new cpufreq driver for Armada 8K (Gregory Clement)

   - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
     Kucheria)

   - Add support for light-weight tear-down and bring-up of CPUs to the
     cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)

   - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
     auto-registration to the cpufreq core and use it in multiple
     cpufreq drivers (Amit Kucheria)

   - Fix some minor issues and do some cleanups in the davinci,
     e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
     (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
     Taniya Das, Viresh Kumar)

   - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
     Wang)

   - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
     Rafael Wysocki)

   - Clean up multiple cpufreq drivers (Yangtao Li)

   - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
     Bulwahn)

   - Add support for exposing the Energy Model via debugfs and make
     multiple cpufreq drivers register an Energy Model to support
     energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
     Kaehlcke)

   - Add Ice Lake mobile and Jacobsville support to the Intel RAPL
     power-capping driver (Gayatri Kammela, Zhang Rui)

   - Add a power estimation helper to the operating performance points
     (OPP) framework and clean up a core function in it (Quentin Perret,
     Viresh Kumar)

   - Make minor improvements in the generic power domains (genpd), OPP
     and system suspend frameworks and in the PM core (Aditya Pakki,
     Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"

* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
  cpufreq: kryo: Release OPP tables on module removal
  cpufreq: ap806: add missing of_node_put after of_device_is_available
  cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
  cpufreq: Pass updated policy to driver ->setpolicy() callback
  cpufreq: Fix two debug messages in cpufreq_set_policy()
  cpufreq: Reorder and simplify cpufreq_update_policy()
  cpufreq: Add kerneldoc comments for two core functions
  PM / core: Add support to skip power management in device/driver model
  cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
  cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
  cpufreq: intel_pstate: Avoid redundant initialization of local vars
  powercap/intel_rapl: add Ice Lake mobile
  ACPI / processor: Set P_LVL{2,3} idle state descriptions
  cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
  ACPI / CPPC: Add a helper to get desired performance
  cpufreq: davinci: move configuration to include/linux/platform_data
  cpufreq: speedstep: convert BUG() to BUG_ON()
  cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
  cpufreq: longhaul: remove unneeded semicolon
  cpufreq: pcc-cpufreq: remove unneeded semicolon
  ..
2019-03-06 12:59:46 -08:00
Thomas Gleixner 8a4b06d391 x86/speculation/mds: Add sysfs reporting for MDS
Add the sysfs reporting file for MDS. It exposes the vulnerability and
mitigation state similar to the existing files for the other speculative
hardware vulnerabilities.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jon Masters <jcm@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
2019-03-06 21:52:14 +01:00
Linus Torvalds e48b044e4f regmap: Changes for v5.1
There's only two changes here, one fix for conflicting attributes on the
 rbtree node structure and the implementation of main status register
 support in the interrupt code which supports chips that have a register
 to cut down on the number of per-interrupt status registers that need to
 be checked when handling interrupts.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9T5kTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0JRLB/4+Te73Gvb0fFoVzZIxSjuLlxRul97K
 6gLgUyxdXrPovBsNIN9r5lG5A0PstfdTs3vrDZfvGmOwQ2eG/Ae7TEb4pt/gF/Rs
 KDIYQ6McygEzCEspr4xyR/MV6jIPTr/01YhvA8KsbyhB6kw50WA+QJX/dkrUdyUb
 /MwluSWkbUQWHr+iJeLROxhyu2jF2X7Ymu66MVLXR8DHlkm3E5fKu1xPbqIvSA7n
 el2j2pJYy4OJ3PQ/5LfASJr4+hEFERPZ1umcQRjXku/og03ZZXp72tyLp4Uz3cGA
 Pel2ZF5fB6Lp0CkAXM1DqAALGchiHU6JNEnls3Brnjcovz2pS0nmDUuM
 =rFCT
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "There are only two changes here:

   - fix for conflicting attributes on the rbtree node structure

   - implementation of main status register support in the interrupt
     code which supports chips that have a register to cut down on the
     number of per-interrupt status registers that need to be checked
     when handling interrupts"

* tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Remove attribute packed from struct 'regcache_rbtree_node'
  regmap: regmap-irq: Add main status register support
2019-03-04 19:16:09 -08:00
Rafael J. Wysocki c3739c50ef Merge branches 'pm-core', 'pm-sleep', 'pm-qos', 'pm-domains' and 'pm-em'
* pm-core:
  PM / core: Add support to skip power management in device/driver model
  PM / suspend: Print debug messages for device using direct-complete
  PM-runtime: update time accounting only when enabled
  PM-runtime: Switch accounting over to ktime_get_mono_fast_ns()
  PM-runtime: Optimize pm_runtime_autosuspend_expiration()
  PM-runtime: Replace jiffies-based accounting with ktime-based accounting
  PM-runtime: update accounting_timestamp on enable
  PM: clock_ops: fix missing clk_prepare() return value check
  drm/i915: Move on the new pm runtime interface
  PM-runtime: Add new interface to get accounted time

* pm-sleep:
  PM / wakeup: fix kerneldoc comment for pm_wakeup_dev_event()

* pm-qos:
  PM: QoS: no need to check return value of debugfs_create functions

* pm-domains:
  PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name()
  PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name()
  PM: domains: no need to check return value of debugfs_create functions

* pm-em:
  PM / EM: Expose the Energy Model in debugfs
2019-03-04 11:18:28 +01:00
Johannes Berg 36cf3b1363 driver core: platform: remove misleading err_alloc label
In platform_device_register_full() the err_alloc label is
misleading, we only ever jump to it if the pdev is NULL,
but it then proceeds to free it, which is a no-op.

Remove the label and simply exit the function immediately.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01 18:08:06 +01:00
Dave Hansen c221c0b030 device-dax: "Hotplug" persistent memory for use like normal RAM
This is intended for use with NVDIMMs that are physically persistent
(physically like flash) so that they can be used as a cost-effective
RAM replacement.  Intel Optane DC persistent memory is one
implementation of this kind of NVDIMM.

Currently, a persistent memory region is "owned" by a device driver,
either the "Direct DAX" or "Filesystem DAX" drivers.  These drivers
allow applications to explicitly use persistent memory, generally
by being modified to use special, new libraries. (DIMM-based
persistent memory hardware/software is described in great detail
here: Documentation/nvdimm/nvdimm.txt).

However, this limits persistent memory use to applications which
*have* been modified.  To make it more broadly usable, this driver
"hotplugs" memory into the kernel, to be managed and used just like
normal RAM would be.

To make this work, management software must remove the device from
being controlled by the "Device DAX" infrastructure:

	echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind

and then tell the new driver that it can bind to the device:

	echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id

After this, there will be a number of new memory sections visible
in sysfs that can be onlined, or that may get onlined by existing
udev-initiated memory hotplug rules.

This rebinding procedure is currently a one-way trip.  Once memory
is bound to "kmem", it's there permanently and can not be
unbound and assigned back to device_dax.

The kmem driver will never bind to a dax device unless the device
is *explicitly* bound to the driver.  There are two reasons for
this: One, since it is a one-way trip, it can not be undone if
bound incorrectly.  Two, the kmem driver destroys data on the
device.  Think of if you had good data on a pmem device.  It
would be catastrophic if you compile-in "kmem", but leave out
the "device_dax" driver.  kmem would take over the device and
write volatile data all over your good data.

This inherits any existing NUMA information for the newly-added
memory from the persistent memory device that came from the
firmware.  On Intel platforms, the firmware has guarantees that
require each socket's persistent memory to be in a separate
memory-only NUMA node.  That means that this patch is not expected
to create NUMA nodes, but will simply hotplug memory into existing
nodes.

Because NUMA nodes are created, the existing NUMA APIs and tools
are sufficient to create policies for applications or memory areas
to have affinity for or an aversion to using this memory.

There is currently some metadata at the beginning of pmem regions.
The section-size memory hotplug restrictions, plus this small
reserved area can cause the "loss" of a section or two of capacity.
This should be fixable in follow-on patches.  But, as a first step,
losing 256MB of memory (worst case) out of hundreds of gigabytes
is a good tradeoff vs. the required code to fix this up precisely.
This calculation is also the reason we export
memory_block_size_bytes().

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: linux-nvdimm@lists.01.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-28 10:41:23 -08:00
Mans Rullgard 2c1ea6abde platform: set of_node in platform_device_register_full()
If the provided fwnode is an OF node, set dev.of_node as well.

Also add an of_node_reused flag to struct platform_device_info and copy
this to the new device.  This is needed to avoid pinctrl settings being
requested twice.  See 4e75e1d7da ("driver core: add helper to reuse a
device-tree node") for a longer explanation.

Some drivers are just shims that create extra "glue" devices with the
DT device as parent and have the real driver bind to these.  In these
cases, the glue device needs to get a reference to the original DT node
in order for the main driver to access properties and child nodes.

For example, the sunxi-musb driver creates such a glue device using
platform_device_register_full().  Consequently, devices attached to
this USB interface don't get associated with DT nodes, if present,
the way they do with EHCI.

This change will allow sunxi-musb and similar drivers to easily
propagate the DT node to child devices as required.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26 12:58:10 +01:00
John Zhao eac473bce4 firmware: hardcode the debug message for -ENOENT
When no file /path was found, the error code of -ENOENT
enumerated in errno-base.h, is returned. Stating clearly that
the file was not found is much more useful for debugging, So
let's be explicit about that.

Signed-off-by: John Zhao <yuankuiz@codeaurora.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26 11:59:43 +01:00
Rafael J. Wysocki 656f72bb2e Merge back earlier PM core material for v5.1. 2019-02-24 21:20:27 +01:00
Bartosz Golaszewski 837ccda348 drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
We only build devm_ioremap_resource() if HAS_IOMEM is selected, so this
dependency must cascade down to devm_platform_ioremap_resource().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22 10:08:43 +01:00
Bartosz Golaszewski 7945f929f1 drivers: provide devm_platform_ioremap_resource()
There are currently 1200+ instances of using platform_get_resource()
and devm_ioremap_resource() together in the kernel tree.

This patch wraps these two calls in a single helper. Thanks to that
we don't have to declare a local variable for struct resource * and can
omit the redundant argument for resource type. We also have one
function call less.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21 13:04:34 +01:00
Vincent Guittot 74fb448630 PM-runtime: Fix deadlock when canceling hrtimer
When rpm_resume() desactivates the autosuspend timer, it should only
try to cancel hrtimer but not wait for the handler to finish, because
both rpm_resume() and pm_suspend_timer_fn() take the power.lock.

A deadlock is possible as follows:

CPU0                              CPU1
rpm_resume()
  spin_lock_irqsave
                                  pm_suspend_timer_fn()
                                    spin_lock_irqsave
  pm_runtime_deactivate_timer()
    hrtimer_cancel()

It is sufficient to call hrtimer_try_to_cancel() from
pm_runtime_deactivate_timer(), because dev->power.timer_expires
reset to 0 by it, so use that function instead of hrtimer_cancel().

Fixes: 8234f6734c ("PM-runtime: Switch autosuspend over to using hrtimers")
Reported-by: Sunzhaosheng Sun(Zhaosheng) <sunzhaosheng@hisilicon.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-21 10:29:00 +01:00
Daniel Vetter 4509209f8b Pull in char-misc-next from Greg
We need 32ea33a044 ("mei: bus: export to_mei_cl_device for mei
client devices drivers") for the mei-hdcp patches.

References: https://lkml.org/lkml/2019/2/19/356
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2019-02-20 20:51:33 +01:00
Christoph Hellwig ddb26d8e1e dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
This is where all the related code already lives.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20 07:27:00 -07:00
Rafael J. Wysocki 36003d4cf5 driver core: Fix PM-runtime for links added during consumer probe
Commit 4c06c4e6cf ("driver core: Fix possible supplier PM-usage
counter imbalance") introduced a regression that causes suppliers
to be suspended prematurely for device links added during consumer
driver probe if the initial PM-runtime status of the consumer is
"suspended" and the consumer is resumed after adding the link and
before pm_runtime_put_suppliers() is called.  In that case,
pm_runtime_put_suppliers() will drop the rpm_active refcount for
the link by one and (since rpm_active is equal to two after the
preceding consumer resume) the supplier's PM-runtime usage counter
will be decremented, which may cause the supplier to suspend even
though the consumer's PM-runtime status is "active".

For this reason, partially revert commit 4c06c4e6cf as the problem
it tried to fix needs to be addressed somewhat differently, and
change pm_runtime_get_suppliers() and pm_runtime_put_suppliers() so
that the latter only drops rpm_active references acquired by the
former.  [This requires adding a new field to struct device_link,
but I coulnd't find a cleaner way to address the issue that would
work in all cases.]

This causes pm_runtime_put_suppliers() to effectively ignore device
links added during consumer probe, so device_link_add() doesn't need
to worry about ensuring that suppliers will remain active after
pm_runtime_put_suppliers() for links created with DL_FLAG_RPM_ACTIVE
set and it only needs to bump up rpm_active by one for those links,
so pm_runtime_active_link() is not necessary any more.

Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20 11:18:07 +01:00
Daniel Vetter e4246b0550 drivers/component: kerneldoc polish
Polish the kerneldoc a bit with suggestions from Randy.

v2: Randy found another typo: s/compent/component/

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19 13:20:35 +01:00
Sudeep Holla 85945c28b5 PM / core: Add support to skip power management in device/driver model
All device objects in the driver model contain fields that control the
handling of various power management activities. However, it's not
always useful. There are few instances where pseudo devices are added
to the model just to take advantage of many other features like
kobjects, udev events, and so on. One such example is cpu devices and
their caches.

The sysfs for the cpu caches are managed by adding devices with cpu
as the parent in cpu_device_create() when secondary cpu is brought
online. Generally when the secondary CPUs are hotplugged back in as part
of resume from suspend-to-ram, we call cpu_device_create() from the cpu
hotplug state machine while the cpu device associated with that CPU is
not yet ready to be resumed as the device_resume() call happens bit
later. It's not really needed to set the flag is_prepared for cpu
devices as they are mostly pseudo device and hotplug framework deals
with state machine and not managed through the cpu device.

This often results in annoying warning when resuming:
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
 cache: parent cpu1 should not be sleeping
CPU1 is up
CPU2: Booted secondary processor
 cache: parent cpu2 should not be sleeping
CPU2 is up
.... and so on.

So in order to fix these kind of errors, we could just completely avoid
doing any power management related initialisations and operations if
they are not used by these devices.

Add no_pm flags to indicate that the device doesn't require any sort of
PM activities and all of them can be completely skipped. We can use the
same flag to also avoid adding not used *power* sysfs entries for these
devices. For now, lets use this for cpu cache devices.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-19 10:42:43 +01:00
Douglas Anderson eeb35df052 PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name()
As of the patch ("PM / Domains: Mark "name" const in
genpd_dev_pm_attach_by_name()") it's clear that the name in
dev_pm_domain_attach_by_name() can be const.  Mark it as so.  This
allows drivers to pass in a name that was declared "const" in a
driver.

Fixes: 27dceb81f4 ("PM / Domains: Introduce dev_pm_domain_attach_by_name()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-15 11:36:38 +01:00
Douglas Anderson 7416f1f206 PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name()
The genpd_dev_pm_attach_by_name() simply takes the name and passes it
to of_property_match_string() where the argument is "const char *".
Adding a const here allows a later patch to add a const to
dev_pm_domain_attach_by_name() which allows drivers to pass in a name
that was declared "const" in a driver.

Fixes: 5d6be70add ("PM / Domains: Introduce option to attach a device by name to genpd")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-15 11:36:15 +01:00
Heikki Krogerus 344798206f software node: Implement get_named_child_node fwnode callback
This makes it possible to support drivers that use
fwnode_get_named_child_node() and device_get_named_child_node()
functions.

The node name is for now taken from a device property named
"name". That mimics the old style of naming of the nodes in
devicetree (though with modern flattened DT, the name is
matched against the actual node-name, it used to be done
with a property "name"). In Open Firmware DT the "name"
property is also still being used.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-14 11:33:15 +01:00
Heikki Krogerus 637e9e52b1 device connection: Find device connections also from device graphs
If connections between devices are described in OF graph or
ACPI device graph, we can find them by using the
fwnode_graph_*() functions.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Tested-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14 10:52:25 +01:00
Heikki Krogerus 80e04837a4 device connection: Prepare support for firmware described connections
When the connections are defined in firmware, struct
device_connection will have the fwnode member pointing to
the device node (struct fwnode_handle) of the requested
device. The endpoint member for the device names will not be
used at all in that case.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Tested-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14 10:52:25 +01:00
Feng Tang 1ea61b68d0 async: Add cmdline option to specify drivers to be async probed
Asynchronous driver probing can help much on kernel fastboot, and
this option can provide a flexible way to optimize and quickly verify
async driver probe.

Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which
  could use async probing while others don't. So we can't simply
  turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this
  cmdline option, like igb driver async patch discussed at
  https://www.spinics.net/lists/netdev/msg545986.html

* For SOC (System on Chip) with multiple spi or i2c controllers, most
  of the slave spi/i2c devices will be assigned with fixed controller
  number, while async probing may make those controllers get different
  index for each boot, which prevents those controller drivers to be
  async probed. For platforms not using these spi/i2c slave devices,
  they can use this cmdline option to benefit from the async probing.

Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14 10:51:39 +01:00
Rafael J. Wysocki 4a0fa9f9fd PM / suspend: Print debug messages for device using direct-complete
Devices using the direct-complete optimization are not present it
debug messages printed by the core device suspend and resume code,
which sometimes makes it difficult to diagnose problems related to
them, so add debug messages for those devices.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-13 23:19:25 +01:00
Rafael J. Wysocki 4c06c4e6cf driver core: Fix possible supplier PM-usage counter imbalance
If a stateless device link to a certain supplier with
DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the
consumer driver's probe callback, the supplier's PM-runtime usage
counter will be nonzero after that which effectively causes the
supplier to remain "always on" going forward.

Namely, device_link_add() called to add the link invokes
device_link_rpm_prepare() which notices that the consumer driver is
probing, so it increments the supplier's PM-runtime usage counter
with the assumption that the link will stay around until
pm_runtime_put_suppliers() is called by driver_probe_device(),
but if the link goes away before that point, the supplier's
PM-runtime usage counter will remain nonzero.

To prevent that from happening, first rework pm_runtime_get_suppliers()
and pm_runtime_put_suppliers() to use the rpm_active refounts of device
links and make the latter only drop rpm_active and the supplier's
PM-runtime usage counter for each link by one, unless rpm_active is
one already for it.  Next, modify device_link_add() to bump up the
new link's rpm_active refcount and the suppliers PM-runtime usage
counter by two, to prevent pm_runtime_put_suppliers(), if it is
called subsequently, from suspending the supplier prematurely (in
case its PM-runtime usage counter goes down to 0 in there).

Due to the way rpm_put_suppliers() works, this change does not
affect runtime suspend of the consumer ends of new device links (or,
generally, device links for which DL_FLAG_PM_RUNTIME has just been
set).

Fixes: e2f3cd831a ("driver core: Fix handling of runtime PM flags in device_link_add()")
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13 09:09:57 +01:00
Rafael J. Wysocki c1567f813a PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
Commit 4080ab0830 ("PM-runtime: Take suppliers into account in
__pm_runtime_set_status()") introduced a race condition that may
trigger if __pm_runtime_set_status() is used incorrectly (that is,
if it is called when PM-runtime is enabled for the target device
and working).

In that case, if the original PM-runtime status of the device is
RPM_SUSPENDED, a runtime resume of the device may occur after
__pm_runtime_set_status() has dropped its power.lock spinlock
and before deactivating its suppliers, so the suppliers may be
deactivated while the device is PM-runtime-active which may lead
to functional issues.

To avoid that, modify __pm_runtime_set_status() to check whether
or not PM-runtime is enabled for the device before activating its
suppliers (if the new status is RPM_ACTIVE) and either return an
error if that's the case or increment the device's disable_depth
counter to prevent PM-runtime from being enabled for it while
the remaining part of the function is running (disable_depth is
then decremented on the way out).

Fixes: 4080ab0830 ("PM-runtime: Take suppliers into account in __pm_runtime_set_status()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13 09:09:51 +01:00
Enrico Granata daaef255dc driver: platform: Support parsing GpioInt 0 in platform_get_irq()
ACPI 5 added support for GpioInt resources as a way to provide
information about interrupts mediated via a GPIO controller.

Several device buses (e.g. SPI, I2C) have support for retrieving
an IRQ specified via this type of resource, and providing it
directly to the driver as an IRQ number.

This is not currently done for the platform drivers, as platform_get_irq()
does not try to parse GpioInt() resources. This requires drivers to
either have to support only one possible IRQ resource, or to have code
in place to try both as a failsafe.

While there is a possibility of ambiguity for devices that exposes
multiple IRQs, it is easy and feasible to support the common case
of devices that only expose one IRQ which would be of either type
depending on the underlying system's architecture.

This commit adds support for parsing a GpioInt resource in order
to fulfill a request for the index 0 IRQ for a platform device.

Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12 10:36:49 +01:00
Greg Kroah-Hartman 4417967bf2 typed componented support + i915/snd-hda changes
This is needed by the new MEI-HDCP support in i915, so will need to go
 in through drm and drivers-misc trees at least.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAlxhq5IACgkQTA9ye/CY
 qnE09xAAmLh7Jap/OizQOGdPvoPqH1n64sf36hmGuEbKSeZBasUc7ZP75FIBY/pr
 +y6oGLjRxYdvzVg8UJrNV4jDzyClgeeA9WyVEmEVwppgZGxXKNfCWRU/qB5zhhoA
 3+SbnV6HuFOAem/nCqQHuEqUv0aF+8QGi8ifcUIVqgraDPNjcmFezj8naGq/3cS6
 moFhHNIKsDdBctOk8R+cYe+hhPbNlzfvt5Kd9j0ksjDrQdf/kCWhOZ1YGfYAGqvY
 cXzjd4DA/5Gjh1afz1KIxB3TOEDSEWGYm3/QJo2U+pwqRglO39ky5vhL3yIjwwrt
 mvztd45rD9/+IoCyfT5DFJ7KkHRi9omT1OtVS/ndRoPFg3Uvt5k6J0Skz5KP1Nkr
 DeY3JT4CxKPl2//5p8cFexn+F8rd5uRE2y/Qb36I5GOIqj5etmZM2U+kI2c1mRDp
 Iiqci/7AhuvGofoTUzK3DvMAM/+zC9mptNA+g+eW63muqazwRCy2ZGqSe2/MXA18
 739GoGllnYexQR9cJrqgMUUJZVcWvJJvadmScONxRfidQhqKeiCplLpPDNTZyhH6
 58njXhfNS2BXGoOpFtgEmBaGpbTcEI2ZoBR/3U34L1Iial+Wo073RmOKRxtStaV8
 uTefSKHhp50i9Qp5h3xfu0ySTWI/mtNGaqOHkRQYE5Dnl//9cBs=
 =IhHa
 -----END PGP SIGNATURE-----

Merge tag 'topic/component-typed-2019-02-11' of git://anongit.freedesktop.org/drm/drm-intel into driver-core-next

Daniel writes:

typed componented support + i915/snd-hda changes

This is needed by the new MEI-HDCP support in i915, so will need to go
in through drm and drivers-misc trees at least.

* tag 'topic/component-typed-2019-02-11' of git://anongit.freedesktop.org/drm/drm-intel:
  i915/snd_hdac: I915 subcomponent for the snd_hdac
  components: multiple components for a device
  component: Add documentation
2019-02-11 20:32:31 +01:00
Greg Kroah-Hartman 9481caf39b Merge 5.0-rc6 into driver-core-next
We need the debugfs fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11 09:09:02 +01:00
Linus Torvalds 8c8e62cc98 Driver core fixes for 5.0-rc6
Here are some driver core fixes for 5.0-rc6.
 
 Well, not so much "driver core" as "debugfs".  There's a lot of
 outstanding debugfs cleanup patches coming in through different
 subsystem trees, and in that process the debugfs core was found that it
 really should return errors when something bad happens, to prevent
 random files from showing up in the root of debugfs afterward.  So
 debugfs was fixed up to handle this properly, and then two fixes for
 the relay and blk-mq code was needed as it was making invalid
 assumptions about debugfs return values.
 
 There's also a cacheinfo fix in here that resolves a tiny issue.
 
 All of these have been in linux-next for over a week with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXF069g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk0+gCgy9PTVAJR5ZbYtWTJOTdBnd7pfqMAoMuGxc+6
 LLEbfSykLRxEf5SeOJun
 =KP8e
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes for 5.0-rc6.

  Well, not so much "driver core" as "debugfs". There's a lot of
  outstanding debugfs cleanup patches coming in through different
  subsystem trees, and in that process the debugfs core was found that
  it really should return errors when something bad happens, to prevent
  random files from showing up in the root of debugfs afterward. So
  debugfs was fixed up to handle this properly, and then two fixes for
  the relay and blk-mq code was needed as it was making invalid
  assumptions about debugfs return values.

  There's also a cacheinfo fix in here that resolves a tiny issue.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  blk-mq: protect debugfs_create_files() from failures
  relay: check return of create_buf_file() properly
  debugfs: debugfs_lookup() should return NULL if not found
  debugfs: return error values, not NULL
  debugfs: fix debugfs_rename parameter checking
  cacheinfo: Keep the old value if of_property_read_u32 fails
2019-02-08 10:53:44 -08:00
Daniel Vetter 3521ee994b components: multiple components for a device
Component framework is extended to support multiple components for
a struct device. These will be matched with different masters based on
its sub component value.

We are introducing this, as I915 needs two different components
with different subcomponent value, which will be matched to two
different component masters(Audio and HDCP) based on the subcomponent
values.

v2: Add documenation.

v3: Rebase on top of updated documenation.

v4: Review from Rafael:
- Remove redundant "This" from kerneldoc (also in the previous patch)
- Streamline the logic in find_component() a bit.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1 code)
Signed-off-by: Ramalingam C <ramalingam.c@intel.com> (v1 commit message)
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-2-daniel.vetter@ffwll.ch
2019-02-08 16:58:03 +01:00
Daniel Vetter 4d69c80e0d component: Add documentation
While typing these I think doing an s/component_master/aggregate/
would be useful:
- it's shorter :-)
- I think component/aggregate is much more meaningful naming than
  component/puppetmaster or something like that. At least to my
  English ear "aggregate" emphasizes much more the "assemble a pile of
  things into something bigger" aspect, and there's not really much
  of a control hierarchy between aggregate and constituing components.

But that's way more than a quick doc typing exercise ...

Thanks to Ram for commenting on an initial draft of these docs.

v2: Review from Rafael:
- git add Documenation/driver-api/component.rst
- lots of polish to the wording + spelling fixes.

v3: Review from Russell:
- s/framework/helper
- clarify the documentation for component_match_add functions.

v4: Remove a few superflous "This".

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "C, Ramalingam" <ramalingam.c@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-1-daniel.vetter@ffwll.ch
2019-02-08 16:57:38 +01:00
Geert Uytterhoeven 376991db4b driver core: Postpone DMA tear-down until after devres release
When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS
(R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for
device pass-through for virtualization:

    echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind

the kernel crashes with:

    Unable to handle kernel paging request at virtual address ffffffbf029ffffc
    Mem abort info:
      ESR = 0x96000006
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000006
      CM = 0, WnR = 0
    swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c
    [ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000
    Internal error: Oops: 96000006 [#1] SMP
    Modules linked in:
    CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287
    Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
    pstate: 60400005 (nZCv daif +PAN -UAO)
    pc : __free_pages+0x8/0x58
    lr : __dma_direct_free_pages+0x50/0x5c
    sp : ffffff801268baa0
    x29: ffffff801268baa0 x28: 0000000000000000
    x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0
    x25: ffffffc6f9c60810 x24: 0000000000000000
    x23: 00000000fffff000 x22: ffffff8012145000
    x21: 0000000000000800 x20: ffffffbf029fffc8
    x19: 0000000000000000 x18: ffffffc6f86c42c8
    x17: 0000000000000000 x16: 0000000000000070
    x15: 0000000000000003 x14: 0000000000000000
    x13: ffffff801103d7f8 x12: 0000000000000028
    x11: ffffff8011117604 x10: 0000000000009ad8
    x9 : ffffff80110126d0 x8 : ffffffc6f7563000
    x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018
    x5 : ffffff8011cf3cc8 x4 : 0000000000004000
    x3 : 0000000000080000 x2 : 0000000000000001
    x1 : 0000000000000000 x0 : ffffffbf029fffc8
    Process bash (pid: 1098, stack limit = 0x00000000c38e3e32)
    Call trace:
     __free_pages+0x8/0x58
     __dma_direct_free_pages+0x50/0x5c
     arch_dma_free+0x1c/0x98
     dma_direct_free+0x14/0x24
     dma_free_attrs+0x9c/0xdc
     dmam_release+0x18/0x20
     release_nodes+0x25c/0x28c
     devres_release_all+0x48/0x4c
     device_release_driver_internal+0x184/0x1f0
     device_release_driver+0x14/0x1c
     unbind_store+0x70/0xb8
     drv_attr_store+0x24/0x34
     sysfs_kf_write+0x4c/0x64
     kernfs_fop_write+0x154/0x1c4
     __vfs_write+0x34/0x164
     vfs_write+0xb4/0x16c
     ksys_write+0x5c/0xbc
     __arm64_sys_write+0x14/0x1c
     el0_svc_common+0x98/0x114
     el0_svc_handler+0x1c/0x24
     el0_svc+0x8/0xc
    Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404)
    ---[ end trace 8c564cdd3a1a840f ]---

While I've bisected this to commit e8e683ae9a ("iommu/of: Fix
probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels
does fix the problem, this turned out to be a red herring.

On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL.
Hence if a driver has used a managed DMA allocation API, the allocated
DMA memory will be freed using the direct DMA ops, while it may have
been allocated using a custom DMA ops (iommu_dma_ops in this case).

Fix this by reversing the order of the calls to devres_release_all() and
arch_teardown_dma_ops().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-08 12:56:33 +01:00
Rafael J. Wysocki 4080ab0830 PM-runtime: Take suppliers into account in __pm_runtime_set_status()
If the target device has any suppliers, as reflected by device links
to them, __pm_runtime_set_status() does not take them into account,
which is not consistent with the other parts of the PM-runtime
framework and may lead to programming mistakes.

Modify __pm_runtime_set_status() to take suppliers into account by
activating them upfront if the new status is RPM_ACTIVE and
deactivating them on exit if the new status is RPM_SUSPENDED.

If the activation of one of the suppliers fails, the new status
will be RPM_SUSPENDED and the (remaining) suppliers will be
deactivated on exit (the child count of the device's parent
will be dropped too then).

Of course, adding device links locking to __pm_runtime_set_status()
means that it cannot be run fron interrupt context, so make it use
spin_lock_irq() and spin_unlock_irq() instead of spin_lock_irqsave()
and spin_unlock_irqrestore(), respectively.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-08 11:26:14 +01:00
Vincent Guittot fed7e88c07 PM-runtime: update time accounting only when enabled
Update the accounting_timestamp field only when PM runtime is enabled
and don't forget to account the last state before disabling it.

Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Minor cleanups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-05 12:04:39 +01:00
Vincent Guittot c155f6499f PM-runtime: Switch accounting over to ktime_get_mono_fast_ns()
Similar to what happened whith autosuspend, a deadlock has been
reported with PM-runtime accounting in the call path:

change_clocksource
    ...
    write_seqcount_begin
    ...
    timekeeping_update
        ...
        sh_cmt_clocksource_enable
            ...
            rpm_resume
                update_pm_runtime_accounting
                    ktime_get
                        do
                            read_seqcount_begin
                        while read_seqcount_retry
    ....
    write_seqcount_end

Make PM-runtime accounting use ktime_get_mono_fast_ns() to avoid this
problem.

With ktime_get_mono_fast_ns(), the timestamp is not guaranteed to be
monotonic across an update of timekeeping and as a result time can go
backward. Add a test to skip accounting for such situation which should
stay exceptional.

Fixes: a08c2a5a31 ("PM-runtime: Replace jiffies-based accounting with ktime-based accounting")
Reported-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Subject, changelog, comment cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-05 12:04:39 +01:00
Ladislav Michl f800ea320c PM-runtime: Optimize pm_runtime_autosuspend_expiration()
pm_runtime_autosuspend_expiration calls ktime_get_mono_fast_ns()
even when its returned value may be unused. Therefore get the
current time later and remove gotos while there.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-01 11:57:05 +01:00
Rafael J. Wysocki 1cc9c59569 Merge back earlier PM core material for v5.1. 2019-02-01 11:53:35 +01:00
Rafael J. Wysocki e7dd40105a driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER
Add a new device link flag, DL_FLAG_AUTOPROBE_CONSUMER, to request the
driver core to probe for a consumer driver automatically after binding
a driver to the supplier device on a persistent managed device link.

As unbinding the supplier driver on a managed device link causes the
consumer driver to be detached from its device automatically, this
flag provides a complementary mechanism which is needed to address
some "composite device" use cases.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki 72175d4ea4 driver core: Make driver core own stateful device links
Even though stateful device links are managed by the driver core in
principle, their creators are allowed and sometimes even expected
to drop references to them via device_link_del() or
device_link_remove(), but that doesn't really play well with the
"persistent" link concept.

If "persistent" managed device links are created from driver
probe callbacks, device_link_add() called to do that will take a
new reference on the link each time the callback runs and those
references will never be dropped, which kind of isn't nice.

This issues arises because of the link reference counting carried
out by device_link_add() for existing links, but that is only done to
avoid deleting device links that may still be necessary, which
shouldn't be a concern for managed (stateful) links.  These device
links are managed by the driver core and whoever creates one of them
will need it at least as long as until the consumer driver is detached
from its device and deleting it may be left to the driver core just
fine.

For this reason, rework device_link_add() to apply the reference
counting to stateless links only and make device_link_del() and
device_link_remove() drop references to stateless links only too.
After this change, if called to add a stateful device link for
a consumer-supplier pair for which a stateful device link is
present already, device_link_add() will return the existing link
without incrementing its reference counter.  Accordingly,
device_link_del() and device_link_remove() will WARN() and do
nothing when called to drop a reference to a stateful link.  Thus,
effectively, all stateful device links will be owned by the driver
core.

In addition, clean up the handling of the link management flags,
DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_AUTOREMOVE_SUPPLIER, so that
(a) they are never set at the same time and (b) if device_link_add()
is called for a consumer-supplier pair with an existing stateful link
between them, the flags of that link will be combined with the flags
passed to device_link_add() to ensure that the life time of the link
is sufficient for all of the callers of device_link_add() for the
same consumer-supplier pair.

Update the device_link_add() kerneldoc comment to reflect the
above changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki a1fdbfbb1d driver core: Do not call rpm_put_suppliers() in pm_runtime_drop_link()
Calling rpm_put_suppliers() from pm_runtime_drop_link() is excessive
as it affects all suppliers of the consumer device and not just the
one pointed to by the device link being dropped.  Worst case it may
cause the consumer device to stop working unexpectedly.  Moreover, in
principle it is racy with respect to runtime PM of the consumer
device.

To avoid these problems drop runtime PM references on the particular
supplier pointed to by the link in question only and do that after
the link has been dropped from the consumer device's list of links to
suppliers, which is in device_link_free().

Fixes: a0504aecba ("PM / runtime: Drop usage count for suppliers at device link removal")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki 15cfb09416 driver core: Fix adding device links to probing suppliers
Currently, it is not valid to add a device link from a consumer
driver ->probe callback to a supplier that is still probing too, but
generally this is a valid use case.  For example, if the consumer has
just acquired a resource that can only be available if the supplier
is functional, adding a device link to that supplier right away
should be safe (and even desirable arguably), but device_link_add()
doesn't handle that case correctly and the initial state of the link
created by it is wrong then.

To address this problem, change the initial state of device links
added between a probing supplier and a probing consumer to
DL_STATE_CONSUMER_PROBE and update device_links_driver_bound() to
skip such links on the supplier side.

With this change, if the supplier probe completes first,
device_links_driver_bound() called for it will skip the link state
update and when it is called for the consumer, the link state will
be updated to "active".  In turn, if the consumer probe completes
first, device_links_driver_bound() called for it will change the
state of the link to "active" and when it is called for the
supplier, the link status update will be skipped.

However, in principle the supplier or consumer probe may still fail
after the link has been added, so modify device_links_no_driver() to
change device links in the "active" or "consumer probe" state to
"dormant" on the supplier side and update __device_links_no_driver()
to change the link state to "available" only if it is "consumer
probe" or "active".

Then, if the supplier probe fails first, the leftover link to the
probing consumer will become "dormant" and device_links_no_driver()
called for the consumer (when its probe fails) will clean it up.
In turn, if the consumer probe fails first, it will either drop the
link, or change its state to "available" and, in the latter case,
when device_links_no_driver() is called for the supplier, it will
update the link state to "dormant".  [If the supplier probe fails,
but the consumer probe succeeds, which should not happen as long as
the consumer driver is correct, the link still will be around, but
it will be "dormant" until the supplier is probed again.]

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki e2f3cd831a driver core: Fix handling of runtime PM flags in device_link_add()
After commit ead18c23c2 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally without updating its flags.  It is
possible, however, that the second (or any subsequent) caller of
device_link_add() for the same consumer-supplier pair will pass
DL_FLAG_PM_RUNTIME, possibly along with DL_FLAG_RPM_ACTIVE, in flags
to it and the existing link may not behave as expected then.

First, if DL_FLAG_PM_RUNTIME is not set in the existing link's flags
at all, it needs to be set like during the original initialization of
the link.

Second, if DL_FLAG_RPM_ACTIVE is passed to device_link_add() in flags
(in addition to DL_FLAG_PM_RUNTIME), the existing link should to be
updated to reflect the "active" runtime PM configuration of the
consumer-supplier pair and extra care must be taken here to avoid
possible destructive races with runtime PM of the consumer.

To that end, redefine the rpm_active field in struct device_link
as a refcount, initialize it to 1 and make rpm_resume() (for the
consumer) and device_link_add() increment it whenever they acquire
a runtime PM reference on the supplier device.  Accordingly, make
rpm_suspend() (for the consumer) and pm_runtime_clean_up_links()
decrement it and drop runtime PM references to the supplier
device in a loop until rpm_active becones 1 again.

Fixes: ead18c23c2 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki 5db25c9eb8 driver core: Do not resume suppliers under device_links_write_lock()
It is incorrect to call pm_runtime_get_sync() under
device_links_write_lock(), because it may end up trying to take
device_links_read_lock() while resuming the target device and that
will deadlock in the non-SRCU case, so avoid that by resuming the
supplier device in device_link_add() before calling
device_links_write_lock().

Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Fixes: baa8809f60 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki f265df550a driver core: Avoid careless re-use of existing device links
After commit ead18c23c2 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally.  However, if the flags passed to
it on the second (or any subsequent) attempt to create a device
link between the same consumer-supplier pair are not compatible with
the existing link's flags, that is incorrect.

First off, if the existing link is stateless and the next caller of
device_link_add() for the same consumer-supplier pair wants a
stateful one, or the other way around, the existing link cannot be
returned, because it will not match the expected behavior, so make
device_link_add() dump the stack and return NULL in that case.

Moreover, if the DL_FLAG_AUTOREMOVE_CONSUMER flag is passed to
device_link_add(), its caller will expect its reference to the link
to be dropped automatically on consumer driver removal, which will
not happen if that flag is not set in the link's flags (and
analogously for DL_FLAG_AUTOREMOVE_SUPPLIER).  For this reason, make
device_link_add() update the existing link's flags accordingly
before returning it to the caller.

Fixes: ead18c23c2 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Rafael J. Wysocki c8d50986da driver core: Fix DL_FLAG_AUTOREMOVE_SUPPLIER device link flag handling
Change the list walk in device_links_driver_cleanup() to a safe one
to avoid use-after-free when dropping a link from the list during the
walk.

Also, while at it, fix device_link_add() to refuse to create
stateless device links with DL_FLAG_AUTOREMOVE_SUPPLIER set, which is
an invalid combination (setting that flag means that the driver core
should manage the link, so it cannot be stateless), and extend the
kerneldoc comment of device_link_add() to cover the
DL_FLAG_AUTOREMOVE_SUPPLIER flag properly too.

Fixes: 1689cac5b3 ("driver core: Add flag to autoremove device link on supplier unbind")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-01 10:04:08 +01:00
Mathieu Malaterre fa548d79d8 drivers: base: Use __printf markup to silence compiler
Silence warnings (triggered at W=1) by adding relevant __printf
attributes.

  drivers/base/cpu.c:432:2: warning: function '__cpu_device_create' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 19:28:40 +01:00
Alexander Duyck 57ea974fb8 driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity
The current async_probe test code is only testing one device allocated
prior to driver load and only loading one device afterwards. Instead of
doing things this way it makes much more sense to load one device per CPU
in order to actually stress the async infrastructure. By doing this we
should see delays significantly increase in the event of devices being
serialized.

In addition I have updated the test to verify that we are trying to place
the work on the correct NUMA node when we are running in async mode. By
doing this we can verify the best possible outcome for device and driver
load times.

I have added a timeout value that is used to disable the sleep and instead
cause the probe routine to report an error indicating it timed out. By
doing this we limit the maximum runtime for the test to 20 seconds or less.

The last major change in this set is that I have gone through and tuned it
for handling the massive number of possible events that will be scheduled.
Instead of reporting the sleep for each individual device it is moved to
only being displayed if we enable debugging.

With this patch applied below are what a failing test and a passing test
should look like. I elided a few hundred lines in the failing test that
were duplicated since the system I was testing on had a massive number of
CPU cores:

-- Failing --
[  243.524697] test_async_driver_probe: registering first set of asynchronous devices...
[  243.535625] test_async_driver_probe: registering asynchronous driver...
[  243.543038] test_async_driver_probe: registration took 0 msecs
[  243.549559] test_async_driver_probe: registering second set of asynchronous devices...
[  243.568350] platform test_async_driver.447: registration took 9 msecs
[  243.575544] test_async_driver_probe: registering first synchronous device...
[  243.583454] test_async_driver_probe: registering synchronous driver...
[  248.825920] test_async_driver_probe: registration took 5235 msecs
[  248.825922] test_async_driver_probe: registering second synchronous device...
[  248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1
[  248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1
[  248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1
[  248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1
[  248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1
...
[  248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1
[  248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1
[  248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1
[  248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1
[  248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1
[  253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1
[  253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs
[  253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize
[  259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1
[  259.073786] test_async_driver test_async_driver.3: async probe took too long
[  259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1
[  259.089569] test_async_driver test_async_driver.4: async probe took too long
[  259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1
[  259.105338] test_async_driver test_async_driver.5: async probe took too long
[  259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1
[  259.121089] test_async_driver test_async_driver.6: async probe took too long
[  259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1
[  259.136850] test_async_driver test_async_driver.7: async probe took too long
...
[  262.124062] test_async_driver test_async_driver.221: async probe took too long
[  262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1
[  262.140206] test_async_driver test_async_driver.222: async probe took too long
[  262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1
[  262.156351] test_async_driver test_async_driver.223: async probe took too long
[  262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1
[  262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings

-- Passing --
[  105.419247] test_async_driver_probe: registering first set of asynchronous devices...
[  105.432040] test_async_driver_probe: registering asynchronous driver...
[  105.439718] test_async_driver_probe: registration took 0 msecs
[  105.446239] test_async_driver_probe: registering second set of asynchronous devices...
[  105.477986] platform test_async_driver.447: registration took 22 msecs
[  105.485276] test_async_driver_probe: registering first synchronous device...
[  105.493169] test_async_driver_probe: registering synchronous driver...
[  110.597981] test_async_driver_probe: registration took 5097 msecs
[  110.604806] test_async_driver_probe: registering second synchronous device...
[  115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs
[  115.715478] test_async_driver_probe: completed successfully

Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 14:20:54 +01:00
Alexander Duyck 8b9ec6b732 PM core: Use new async_schedule_dev command
Use the device specific version of the async_schedule commands to defer
various tasks related to power management. By doing this we should see a
slight improvement in performance as any device that is sensitive to
latency/locality in the setup will now be initializing on the node closest
to the device.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 14:20:54 +01:00
Alexander Duyck c37e20eaf4 driver core: Attach devices on CPU local to device node
Call the asynchronous probe routines on a CPU local to the device node. By
doing this we should be able to improve our initialization time
significantly as we can avoid having to access the device from a remote
node which may introduce higher latency.

For example, in the case of initializing memory for NVDIMM this can have a
significant impact as initialing 3TB on remote node can take up to 39
seconds while initialing it on a local node only takes 23 seconds. It is
situations like this where we will see the biggest improvement.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 14:20:54 +01:00
Alexander Duyck ef0ff68351 driver core: Probe devices asynchronously instead of the driver
Probe devices asynchronously instead of the driver. This results in us
seeing the same behavior if the device is registered before the driver or
after. This way we can avoid serializing the initialization should the
driver not be loaded until after the devices have already been added.

The motivation behind this is that if we have a set of devices that
take a significant amount of time to load we can greatly reduce the time to
load by processing them in parallel instead of one at a time. In addition,
each device can exist on a different node so placing a single thread on one
CPU to initialize all of the devices for a given driver can result in poor
performance on a system with multiple nodes.

This approach can reduce the time needed to scan SCSI LUNs significantly.
The only way to realize that speedup is by enabling more concurrency which
is what is achieved with this patch.

To achieve this it was necessary to add a new member "async_driver" to the
device_private structure to store the driver pointer while we wait on the
deferred probe call.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 14:20:53 +01:00
Alexander Duyck ed88747c6c device core: Consolidate locking and unlocking of parent and device
Try to consolidate all of the locking and unlocking of both the parent and
device when attaching or removing a driver from a given device.

To do that I first consolidated the lock pattern into two functions
__device_driver_lock and __device_driver_unlock. After doing that I then
created functions specific to attaching and detaching the driver while
acquiring these locks. By doing this I was able to reduce the number of
spots where we touch need_parent_lock from 12 down to 4.

This patch should produce no functional changes, it is meant to be a code
clean-up/consolidation only.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 14:20:53 +01:00
Alexander Duyck 3451a495ef driver core: Establish order of operations for device_add and device_del via bitflag
Add an additional bit flag to the device_private struct named "dead".

This additional flag provides a guarantee that when a device_del is
executed on a given interface an async worker will not attempt to attach
the driver following the earlier device_del call. Previously this
guarantee was not present and could result in the device_del call
attempting to remove a driver from an interface only to have the async
worker attempt to probe the driver later when it finally completes the
asynchronous probe call.

One additional change added was that I pulled the check for dev->driver
out of the __device_attach_driver call and instead placed it in the
__device_attach_async_helper call. This was motivated by the fact that the
only other caller of this, __device_attach, had already taken the
device_lock() and checked for dev->driver. Instead of testing for this
twice in this path it makes more sense to just consolidate the dev->dead
and dev->driver checks together into one set of checks.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31 14:20:53 +01:00
Thara Gopinath a08c2a5a31 PM-runtime: Replace jiffies-based accounting with ktime-based accounting
Replace jiffies-based accounting for runtime_active_time and
runtime_suspended_time with ktime-based accounting. This makes the
runtime debug counters inline with genpd and other PM subsytems which
use ktime-based accounting.

Timekeeping is initialized before driver_init(). It's only at that time
that PM-runtime can be enabled.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
[switch from ktime to raw nsec]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-31 10:45:10 +01:00
Vincent Guittot 58456488e0 PM-runtime: update accounting_timestamp on enable
Initializing accounting_timestamp to something different from 0 during
pm_runtime_init() doesn't make sense and puts an artificial ordering
constraint between timekeeping_init() and pm_runtime_init().

PM-runtime should start time accounting only when it is enabled and
discard the period when disabled.

Set accounting_timestamp to now when enabling PM-runtime.

Suggested-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-31 10:44:44 +01:00
Vincent Guittot 15efb47dc5 PM-runtime: Fix deadlock with ktime_get()
A deadlock has been seen when swicthing clocksources which use
PM-runtime.  The call path is:

change_clocksource
    ...
    write_seqcount_begin
    ...
    timekeeping_update
        ...
        sh_cmt_clocksource_enable
            ...
            rpm_resume
                pm_runtime_mark_last_busy
                    ktime_get
                        do
                            read_seqcount_begin
                        while read_seqcount_retry
    ....
    write_seqcount_end

Although we should be safe because we haven't yet changed the
clocksource at that time, we can't do that because of seqcount
protection.

Use ktime_get_mono_fast_ns() instead which is lock safe for such
cases.

With ktime_get_mono_fast_ns, the timestamp is not guaranteed to be
monotonic across an update and as a result can goes backward.
According to update_fast_timekeeper() description: "In the worst
case, this can result is a slightly wrong timestamp (a few
nanoseconds)". For PM-runtime autosuspend, this means only that
the suspend decision may be slightly suboptimal.

Fixes: 8234f6734c ("PM-runtime: Switch autosuspend over to using hrtimers")
Reported-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-30 22:49:06 +01:00
Mark Brown 66fb181d6f
Merge remote-tracking branch 'regmap/topic/irq' into regmap-next 2019-01-29 17:17:03 +00:00
Mark Brown 31172d1002
Merge branch 'regmap-5.1' into regmap-next 2019-01-29 17:17:02 +00:00
Mathieu Malaterre 435bba0f11
regmap: Remove attribute packed from struct 'regcache_rbtree_node'
On one hand commit 28644c809f ("regmap: Add the rbtree cache support")
added 'regcache_rbtree_node' as packed structure, while on the other hand
commit e977145aea ("[RBTREE] Add explicit alignment to sizeof(long)
for struct rb_node.") declared struct 'rb_node' as aligned.

Solve the ambiguity of placing aligned structure in a packed one by
removing the packed attribute from struct. This seems to be the behavior
of gcc anyway.

This removes the following warning (W=1):

  drivers/base/regmap/regcache-rbtree.c:36:1: warning: alignment 1 of 'struct regcache_rbtree_node' is less than 4 [-Wpacked-not-aligned]

Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-29 15:23:56 +00:00
Yangtao Li d1c6b41b0f PM / wakeup: fix kerneldoc comment for pm_wakeup_dev_event()
This brings the kernel doc in line with the function signature.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-29 11:40:13 +01:00
Greg Kroah-Hartman e16a42c3fa PM: domains: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-23 22:59:57 +01:00
Matti Vaittinen a2d21848d9
regmap: regmap-irq: Add main status register support
There is bunch of devices with multiple logical blocks which
can generate interrupts. It's not a rare case that the interrupt
reason registers are arranged so that there is own status/ack/mask
register for each logical block. In some devices there is also a
'main interrupt register(s)' which can indicate what sub blocks
have interrupts pending.

When such a device is connected via slow bus like i2c the main
part of interrupt handling latency can be caused by bus accesses.
On systems where it is expected that only one (or few) sub blocks
have active interrupts we can reduce the latency by only reading
the main register and those sub registers which have active
interrupts. Support this with regmap-irq for simple cases where
main register does not require acking or masking.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-23 15:52:15 +00:00
Yong Wu 0fe6f7874d driver core: Remove the link if there is no driver with AUTO flag
DL_FLAG_AUTOREMOVE_CONSUMER/SUPPLIER means "Remove the link
automatically on consumer/supplier driver unbind", that means we should
remove whole the device_link when there is no this driver no matter what
the ref_count of the link is.

CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 14:25:26 +01:00
Jerome Brunet 8a4b326911 driver core: silence device link messages unless debugging
On platforms making a fair use of regulators, the dev_info() messages
coming from the device link function are a bit too verbose. The amount
of message will increase further with the clock framework joining the
device link party.

These messages looks valuable for people debugging device link related
issues, so dev_dbg() looks more appropriate than dev_info().

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 14:25:26 +01:00
Huacai Chen 3a34c98632 cacheinfo: Keep the old value if of_property_read_u32 fails
Commit 448a5a552f ("drivers: base: cacheinfo: use OF
property_read_u32 instead of get_property,read_number") makes cache
size and number_of_sets be 0 if DT doesn't provide there values. I
think this is unreasonable so make them keep the old values, which is
the same as old kernels.

Fixes: 448a5a552f ("drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 13:50:31 +01:00
Masahiro Yamada f96182e959 firmware_loader: move firmware/ to drivers/base/firmware_loader/builtin/
Currently, the 'firmware' directory only contains a single Makefile
to embed extra firmware into the kernel.

Move it to the more relevant place.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 10:23:18 +01:00
Masahiro Yamada 91f382a468 firmware_loader: move CONFIG_FW_LOADER_USER_HELPER switch to Makefile
The whole code of fallback_table.c is surrounded by #ifdef of
CONFIG_FW_LOADER_USER_HELPER.

Move the CONFIG_FW_LOADER_USER_HELPER switch to Makefile so that
it is not compiled at all when this CONFIG option is disabled.

I also removed the confusing comment, "Module or buit-in [sic]".
CONFIG_FW_LOADER_USER_HELPER is a boolean option.
(If it were a module, CONFIG_FW_LOADER_USER_HELPER_MODULE would
be defined instead.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 10:23:18 +01:00
Linus Torvalds 6e4673b42e regmap: Fixes for v5.0
The cleanups for the way we handle type information introduced during
 the merge window revealed that we'd been abusing the irq APIs for a long
 time, causing breakage for systems.  This pull request has a couple of
 minimal fixes for that which restore the previous behaviour for the time
 being, we'll fix it properly for v5.1 but that'd be a bit much to do as
 a bug fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlxByIkTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0FErB/4/Od1iLnxAqb8dFmMFA/xbW8V/zmE3
 8BLWUv8URhitdNPfdzWws+hD1AP5GfzoMyUiuP+BB6+x4JCBnL10vwAw7V0YYEox
 NrVB9ALYdu7cGPu809cVqIretGxW28T8PsJehcoHDvSYLXaaIr36tHApIbWlT3bn
 Sh166tTylLZG4bQ/KN0yEcNhyqqU6Lschp1CD7KSXux9jeMFxpQSCR9yJ2qhUbR4
 igNayb4F8jCXU9R1WSD2pE3hTtsvTd/0i87HEzMq4jfSr3dck0dsW7tkewfe/MBl
 1UM+6s46vqEl0u+9whJupDYvNr5ztF+wHnU85E6cX3gP442vk1sxnHaM
 =HTMs
 -----END PGP SIGNATURE-----

Merge tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fixes from Mark Brown:
 "The cleanups for the way we handle type information introduced during
  the merge window revealed that we'd been abusing the irq APIs for a
  long time, causing breakage for systems.

  This has a couple of minimal fixes for that which restore the previous
  behaviour for the time being, we'll fix it properly for v5.1 but
  that'd be a bit much to do as a bug fix"

* tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: do not write mask register if mask_base is zero
  regmap: regmap-irq: silently ignore unsupported type settings
2019-01-19 07:17:19 +12:00
Wei Yang 570d020012 driver core: move device->knode_class to device_private
As the description of struct device_private says, it stores data which
is private to driver core. And it already has similar fields like:
knode_parent, knode_driver, knode_driver and knode_bus. This look it is
more proper to put knode_class together with those fields to make it
private to driver core.

This patch move device->knode_class to device_private to make it comply
with code convention.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18 16:55:48 +01:00
Aditya Pakki 40619f7dd3 PM: clock_ops: fix missing clk_prepare() return value check
clk_prepare() can fail, so check its status and if it fails,
issue an error message and change the clock_entry_status to
PCE_STATUS_ERROR.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-18 11:47:07 +01:00
Vincent Guittot 8a62ffe275 PM-runtime: Add new interface to get accounted time
Some drivers (like i915/drm) needs to get the accounted suspended time.
pm_runtime_suspended_time() will return the suspended accounted time
in ns unit.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-15 22:47:24 +01:00
Greg Kroah-Hartman bdfe0df1e9 Merge 5.0-rc2 into driver-core-next
We want the driver core changes in that branch in here to build on top
of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-15 15:20:53 +01:00
Mark Zhang 7151449fe7
regmap-irq: do not write mask register if mask_base is zero
If client have not provided the mask base register then do not
write into the mask register.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com>
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-14 22:11:22 +00:00
Rafael J. Wysocki 343e60e52a Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'
* pm-cpuidle:
  doc: trace: fix reference to cpuidle documentation file
  cpuidle / Documentation: Update cpuidle MAINTAINERS entry

* pm-cpufreq:
  cpufreq: scmi: Fix frequency invariance in slow path
  cpufreq: check if policy is inactive early in __cpufreq_get()
  cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
  cpufreq / Documentation: Update cpufreq MAINTAINERS entry

* pm-sleep:
  PM: sleep: call devfreq suspend/resume
2019-01-11 10:09:51 +01:00
Vincent Guittot ca27e4cd0b PM-runtime: Fix autosuspend_delay on 32bits arch
Cast autosuspend_delay to u64 to make sure that the full computation
of 'expires' or slack will be done in u64, even on 32bits arch.

Otherwise, any delay greater than 2^31 nsec can overflow if signed
32bits is used when converting delay from msec to nsec.

Fixes: 8234f6734c (PM-runtime: Switch autosuspend over to using hrtimers)
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10 10:55:52 +01:00
Ladislav Michl 1f7b708156 PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.

Fixes: 8234f6734c (PM-runtime: Switch autosuspend over to using hrtimers)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10 10:55:52 +01:00
Greg Kroah-Hartman a472304185 driver core: drop use of BUS_ATTR()
We are trying to get rid of BUS_ATTR() so drop the last user of it from
the tree.  We had to "open code" it in order to prevent a function name
conflict due to the use of DEVICE_ATTR_WO() earlier in the file :(

Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08 15:18:55 +01:00
Greg Kroah-Hartman 2e7189b6c7 driver core: bus: convert to use BUS_ATTR_WO and RW
We are trying to get rid of BUS_ATTR() and the usage of that in bus.c
can be trivially converted to use BUS_ATTR_WO and RW, so use those
macros instead.

Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08 15:18:52 +01:00
Mark Brown 1cd824361e
Merge branch 'regmap-4.21' into regmap-5.0 2019-01-07 12:42:14 +00:00
Linus Torvalds 505b050fdf Merge branch 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount API prep from Al Viro:
 "Mount API prereqs.

  Mostly that's LSM mount options cleanups. There are several minor
  fixes in there, but nothing earth-shattering (leaks on failure exits,
  mostly)"

* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
  mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
  smack: rewrite smack_sb_eat_lsm_opts()
  smack: get rid of match_token()
  smack: take the guts of smack_parse_opts_str() into a new helper
  LSM: new method: ->sb_add_mnt_opt()
  selinux: rewrite selinux_sb_eat_lsm_opts()
  selinux: regularize Opt_... names a bit
  selinux: switch away from match_token()
  selinux: new helper - selinux_add_opt()
  LSM: bury struct security_mnt_opts
  smack: switch to private smack_mnt_opts
  selinux: switch to private struct selinux_mnt_opts
  LSM: hide struct security_mnt_opts from any generic code
  selinux: kill selinux_sb_get_mnt_opts()
  LSM: turn sb_eat_lsm_opts() into a method
  nfs_remount(): don't leak, don't ignore LSM options quietly
  btrfs: sanitize security_mnt_opts use
  selinux; don't open-code a loop in sb_finish_set_opts()
  LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
  new helper: security_sb_eat_lsm_opts()
  ...
2019-01-05 13:25:58 -08:00
Qian Cai 967d3010df drivers/base/platform.c: kmemleak ignore a known leak
unreferenced object 0xffff808ec6dc5a80 (size 128):
  comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
  hex dump (first 32 bytes):
    ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  ........kkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
    [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
    [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
    [<00000000ef135642>] acpi_default_enumeration+0x34/0x78
    [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000002968643e>] acpi_bus_scan+0xb0/0x110
    [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
    [<00000000965b3c5a>] acpi_init+0x408/0x49c
    [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
    [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
    [<0000000070ea6c15>] kernel_init+0x18/0x138
    [<00000000fb8fff06>] ret_from_fork+0x10/0x1c
    [<0000000041273a0d>] 0xffffffffffffffff

Then, faddr2line pointed out this line,

/*
 * This memory isn't freed when the device is put,
 * I don't have a nice idea for that though.  Conceptually
 * dma_mask in struct device should not be a pointer.
 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
 */
pdev->dev.dma_mask =
	kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);

Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.

Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 13:13:48 -08:00
Linus Torvalds 01766d27d2 Device properties framework fixes for 4.21-rc1
Fix two potential NULL pointer dereferences found by Coverity in
 the software nodes code introduced recently (Colin Ian King).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcLI57AAoJEILEb/54YlRxX4QP/RTWeeYLVPfA6le6K67SDpdG
 wN7rJpKLJqC15gJPbMiPRwaxMrq1j/iJ8ntw2aCS9ZxEhaaXpKnIg7zLYaG/CW2Q
 ops0pbFqL2m8CdN0UJKSp8OidXxDevmvbg/G2ebgOflYHyUKmHk8pXre2nw49rf2
 TJtwlvWmHEK4YFdOXJRG3PIZ6U1qLnFkukvWOnNYsa4NXU6T8L9JWSg2NmsU27Ni
 aRH1FNshCWy96WeCr2vY8AeDiRjAfbT08LAxeiJpOolCoN2ejjp7NgWU4RTeKwpo
 TWJ/6Hll98i6Oi105rlQxGq19yu5lM87Ti5xbmATd5NLKR0yL1oF0T5FTtUxge3q
 ISIThK4KWZT3tCP0G7SkaOItlPxFgk2fkPRhS+WmmEDK0zWOxXq31N2dX49U9Hty
 8qpnic4hsjk1oVsc1IcO8Vd8xTKZo+KnE5a3aWXlJ9Bi8GIrlX9q+Fy9YOBKzvA7
 GQkU/oZPUNIiS2+SrEL5f+6HG7nY2L2gCQcRSqJKUBJ98nSFcYYOFYgJmUYzoh5s
 je/XxnkGdRSKJno0NOkQOdAxLl8OV2c5zrH5OGqdUX9PoNbujJEEGk9dT8fN5suD
 MjRcAkjIutq3ELCQMqiJLqXfEibjo64hnjU5zZFurbztFk8LUZpk5AsLCiaEtfAH
 sYtRppt56ok85PFH2weN
 =RZzu
 -----END PGP SIGNATURE-----

Merge tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework fixes from Rafael Wysocki:
 "Fix two potential NULL pointer dereferences found by Coverity in the
  software nodes code introduced recently (Colin Ian King)"

* tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  drivers: base: swnode: check if swnode is NULL before dereferencing it
  drivers: base: swnode: check if pointer p is NULL before dereferencing it
2019-01-02 18:43:57 -08:00
Lukasz Luba 6e863844ad PM: sleep: call devfreq suspend/resume
Devfreq framework supports suspend of its devices.
Call the the devfreq interface and allow devfreq devices
preserve/restore their states during suspend/resume.

Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-02 23:07:41 +01:00
Linus Torvalds 28e8c4bc8e RTC for 4.21
Subsystem:
  - new %ptR printk format
  - rename core files
  - allow registration of multiple nvmem devices
 
 New driver:
  - i.MX system controller RTC
 
 Drivers:
  - abx80x: handle voltage ioctls, correct binding doc
  - m41t80: correct month in alarm reads
  - pcf85363: add pcf85263 support
  - pcf8523: properly handle battery low flag
  - s3c: limit alarm to one year in the future as ALMYEAR is broken
  - sun6i: rework clock output binding
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlwqU44ACgkQAyWl4gNJ
 NJJjGxAAgQMTkarMx16icKpN35iuXgwZdIKKmWIHGyCJeB1ykHS8TgwkP+4pE1aN
 UwTw6x9TBxa9KpuexCgrx8/zppM0i1jacaxJkDbrj1OBPAlGrbJrwcSH029qHAu6
 N1Oo0GvAIPlEmIJkKVWkgZhGqUwvMvcy2amk06S92PPOIfr5zJsRzNmduEE7bpcl
 86EckuFOp9c1p4IayeQhIT+GHPtum4WkmGVw3+j0j/E6aCUD3thLohT+KuGfzzKn
 jHbtZ+/d17etKtxxI26YrmixH603t66ZSuc64rSvKRKYR8u/qqR3ZTotYVonsPHj
 NNQsWiNRzwkpiN9n1Big0tLJyXJ6qbYQIrJLMc19Jr10tS815WF5rjmNinfdSazX
 4xucIJpMh7VgA3W5BpvN1+UEahiznp2QGiLjauoruMrB7XUUSLPv6VohFiKAfd9S
 7SyV2moPWVnj4pJPH6Af2zVLE9YyPoWGvUSwosLZKhpoFNLOnVZAU0vo32M/23wv
 ejv4YPhtqxqT94XUyrWKE1DaTpxMqBHcHj2ThV+NGCWe4C0+KfW0zmbKm1X588UJ
 ZhmGODV9acU+46It5mFoE2Zb9WPyEwljjxbvXKQZhdONKIoZ6lz1i7nzy6C2qerQ
 ZW5baiaCvQ5e/NyWLxEZwvHukBo2OBxkXe8isuk/wz+7Qyw3l34=
 =5He5
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - new %ptR printk format
   - rename core files
   - allow registration of multiple nvmem devices

  New driver:
   - i.MX system controller RTC

  Driver updates:
   - abx80x: handle voltage ioctls, correct binding doc
   - m41t80: correct month in alarm reads
   - pcf85363: add pcf85263 support
   - pcf8523: properly handle battery low flag
   - s3c: limit alarm to one year in the future as ALMYEAR is broken
   - sun6i: rework clock output binding"

* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
  rtc: rename core files
  rtc: nvmem: fix possible use after free
  rtc: add i.MX system controller RTC support
  dt-bindings: fsl: scu: add rtc binding
  rtc: pcf2123: Add Microcrystal rv2123
  rtc: class: reimplement devm_rtc_device_register
  rtc: enforce rtc_timer_init private_data type
  rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
  rtc: pcf85363: Add support for NXP pcf85263 rtc
  dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
  rtc: pcf8523: don't return invalid date when battery is low
  dt-bindings: rtc: use a generic node name for ds1307
  PM: Switch to use %ptR
  m68k/mac: Switch to use %ptR
  Input: hp_sdc_rtc - Switch to use %ptR
  rtc: tegra: Switch to use %ptR
  rtc: s5m: Switch to use %ptR
  rtc: s3c: Switch to use %ptR
  rtc: rx8025: Switch to use %ptR
  rtc: rx6110: Switch to use %ptR
  ...
2019-01-01 13:24:31 -08:00
Matti Vaittinen 74d4b4e0f4
regmap: regmap-irq: silently ignore unsupported type settings
Do not return error if irq-type setting is requested for
controlloer which does not support this. This is how
regmap-irq has previously handled the undupported type
settings and existing drivers seem to be upset if failure
is now reported.

Fixes: 1c2928e3e3 ("regmap: regmap-irq/gpio-max77620: add level-irq support")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-31 19:35:26 +00:00
Linus Torvalds b07039b79c Driver core patches for 4.21-rc1
Here is the "big" set of driver core patches for 4.21-rc1.
 
 It's not really big, just a number of small changes for some reported
 issues, some documentation updates to hopefully make it harder for
 people to abuse the driver model, and some other minor cleanups.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCY/dA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylZrgCeIi+rWj0mqlyKZk0A+gurH2BPmfwAniGfiHJp
 w60Fr5/EbCqUr1d1wQIO
 =4N7R
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 4.21-rc1.

  It's not really big, just a number of small changes for some reported
  issues, some documentation updates to hopefully make it harder for
  people to abuse the driver model, and some other minor cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  mm, memory_hotplug: update a comment in unregister_memory()
  component: convert to DEFINE_SHOW_ATTRIBUTE
  sysfs: Disable lockdep for driver bind/unbind files
  driver core: Add missing dev->bus->need_parent_lock checks
  kobject: return error code if writing /sys/.../uevent fails
  driver core: Move async_synchronize_full call
  driver core: platform: Respect return code of platform_device_register_full()
  kref/kobject: Improve documentation
  drivers/base/memory.c: Use DEVICE_ATTR_RO and friends
  driver core: Replace simple_strto{l,ul} by kstrtou{l,ul}
  kernfs: Improve kernfs_notify() poll notification latency
  kobject: Fix warnings in lib/kobject_uevent.c
  kobject: drop unnecessary cast "%llu" for u64
  driver core: fix comments for device_block_probing()
  driver core: Replace simple_strtol by kstrtoint
2018-12-28 20:44:29 -08:00
Linus Torvalds f346b0becb Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - large KASAN update to use arm's "software tag-based mode"

 - a few misc things

 - sh updates

 - ocfs2 updates

 - just about all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
  kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
  memcg, oom: notify on oom killer invocation from the charge path
  mm, swap: fix swapoff with KSM pages
  include/linux/gfp.h: fix typo
  mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
  hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
  hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
  memory_hotplug: add missing newlines to debugging output
  mm: remove __hugepage_set_anon_rmap()
  include/linux/vmstat.h: remove unused page state adjustment macro
  mm/page_alloc.c: allow error injection
  mm: migrate: drop unused argument of migrate_page_move_mapping()
  blkdev: avoid migration stalls for blkdev pages
  mm: migrate: provide buffer_migrate_page_norefs()
  mm: migrate: move migrate_page_lock_buffers()
  mm: migrate: lock buffers before migrate_page_move_mapping()
  mm: migration: factor out code to compute expected number of page references
  mm, page_alloc: enable pcpu_drain with zone capability
  kmemleak: add config to select auto scan
  mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
  ...
2018-12-28 16:55:46 -08:00
Linus Torvalds af7ddd8a62 DMA mapping updates for Linux 4.21
A huge update this time, but a lot of that is just consolidating or
 removing code:
 
  - provide a common DMA_MAPPING_ERROR definition and avoid indirect
    calls for dma_map_* error checking
  - use direct calls for the DMA direct mapping case, avoiding huge
    retpoline overhead for high performance workloads
  - merge the swiotlb dma_map_ops into dma-direct
  - provide a generic remapping DMA consistent allocator for architectures
    that have devices that perform DMA that is not cache coherent. Based
    on the existing arm64 implementation and also used for csky now.
  - improve the dma-debug infrastructure, including dynamic allocation
    of entries (Robin Murphy)
  - default to providing chaining scatterlist everywhere, with opt-outs
    for the few architectures (alpha, parisc, most arm32 variants) that
    can't cope with it
  - misc sparc32 dma-related cleanups
  - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
    replace it with the generic noncoherent infrastructure
  - fix the return type of dma_set_max_seg_size (Niklas Söderlund)
  - move the dummy dma ops for not DMA capable devices from arm64 to
    common code (Robin Murphy)
  - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
    leaks through userspace.  We already did this for most common
    architectures, but this ensures we do it everywhere.
    dma_zalloc_coherent has been deprecated and can hopefully be
    removed after -rc1 with a coccinelle script.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlwctQgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMxgQ//dBpAfS4/J76CdAbYry2zqgcOUU9hIrD6NHiEMWov
 ltJxyvEl3LsUmIdEj3aCrYL9jZN0qsnCzn5BVj2c3jDIVgD64fAr7HDf/PbEEfKb
 j6/GgEnVLPZV+sQMvhNA5jOzHrkseaqPa4/pNLFZ/l8jnuZ2d+btusDWJpMoVDer
 TXVwtIfgeIu0gTygYOShLYXd5qptWKWsZEpbTZOO2sE6+x+ZJX7yQYUxYDTlcOIj
 JWVO2l5QNHPc5T9o2at+6L5aNUvnZOxT79sWgyZLn0Kc+FagKAVwfLqUEl0v7foG
 8k/xca5/8p3afB1DfrIrtplJqis7cVgdyGxriwuuoO8X4F0nPyWwpGmxsBhrWwwl
 xTqC4UorEJ7QwoP6Azopk/vYI2QXIUBLjuCJCuFXZj9+2BGf4IfvBY1S2cLM9qLs
 HMcxQonuXJii044KEFS96ePEuiT+igVINweIFBKWcgNCEG0UQtyL6RQ1U5297ipF
 JiWZAqD+p9X52UdKS+oKfAiZEekMXn6Xyo97+YCiNpfOo0GP5eEcwhL+JpY4AiRq
 apPXtsRy2o1s8yfjdraUIM2Mc2n62vFKb35oUbGCd/QO9piPrFQHl6T0HHcHk4YR
 XrUXcHieFZBCYqh7ZVa4RL8Msq1wvGuTL4Dxl43mXdsMoUFRR6eSNWLoAV4IpOLZ
 WgA=
 =in72
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:
 "A huge update this time, but a lot of that is just consolidating or
  removing code:

   - provide a common DMA_MAPPING_ERROR definition and avoid indirect
     calls for dma_map_* error checking

   - use direct calls for the DMA direct mapping case, avoiding huge
     retpoline overhead for high performance workloads

   - merge the swiotlb dma_map_ops into dma-direct

   - provide a generic remapping DMA consistent allocator for
     architectures that have devices that perform DMA that is not cache
     coherent. Based on the existing arm64 implementation and also used
     for csky now.

   - improve the dma-debug infrastructure, including dynamic allocation
     of entries (Robin Murphy)

   - default to providing chaining scatterlist everywhere, with opt-outs
     for the few architectures (alpha, parisc, most arm32 variants) that
     can't cope with it

   - misc sparc32 dma-related cleanups

   - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
     replace it with the generic noncoherent infrastructure

   - fix the return type of dma_set_max_seg_size (Niklas Söderlund)

   - move the dummy dma ops for not DMA capable devices from arm64 to
     common code (Robin Murphy)

   - ensure dma_alloc_coherent returns zeroed memory to avoid kernel
     data leaks through userspace. We already did this for most common
     architectures, but this ensures we do it everywhere.
     dma_zalloc_coherent has been deprecated and can hopefully be
     removed after -rc1 with a coccinelle script"

* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
  dma-mapping: fix inverted logic in dma_supported
  dma-mapping: deprecate dma_zalloc_coherent
  dma-mapping: zero memory returned from dma_alloc_*
  sparc/iommu: fix ->map_sg return value
  sparc/io-unit: fix ->map_sg return value
  arm64: default to the direct mapping in get_arch_dma_ops
  PCI: Remove unused attr variable in pci_dma_configure
  ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
  dma-mapping: bypass indirect calls for dma-direct
  vmd: use the proper dma_* APIs instead of direct methods calls
  dma-direct: merge swiotlb_dma_ops into the dma_direct code
  dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
  dma-direct: improve addressability error reporting
  swiotlb: remove dma_mark_clean
  swiotlb: remove SWIOTLB_MAP_ERROR
  ACPI / scan: Refactor _CCA enforcement
  dma-mapping: factor out dummy DMA ops
  dma-mapping: always build the direct mapping code
  dma-mapping: move dma_cache_sync out of line
  dma-mapping: move various slow path functions out of line
  ...
2018-12-28 14:12:21 -08:00
Michal Hocko 1ecc07fd0a memory_hotplug: add missing newlines to debugging output
pages_correctly_probed is missing new lines which means that the line is
not printed rightaway but it rather waits for additional printks.

Add \n to all three messages in pages_correctly_probed.

Link: http://lkml.kernel.org/r/20181218162307.10518-1-mhocko@kernel.org
Fixes: b77eab7079 ("mm/memory_hotplug: optimize probe routine")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:51 -08:00
Wei Yang 3b6fd6ffb2 drivers/base/memory.c: remove an unnecessary check on NR_MEM_SECTIONS
In cb5e39b803 ("drivers: base: refactor add_memory_section() to
add_memory_block()"), add_memory_block() is introduced, which is only
invoked in memory_dev_init().

When combining these two loops in memory_dev_init() and
add_memory_block(), they looks like this:

    for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block)
        for (j = i;
	    (j < i + sections_per_block) && j < NR_MEM_SECTIONS;
	    j++)

Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory
block, the check of (j < NR_MEM_SECTIONS) is not necessary.

This patch just removes this check.

Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Colin Ian King f4747b9c68 drivers: base: swnode: check if swnode is NULL before dereferencing it
The to_software_mode() macro can potentially return NULL, so also add
a NULL check on swnode before dereferencing it to avoid any NULL
pointer dereferences.

Detected by CoverityScan, CID#1476052 ("Explicit null dereferenced")

Fixes: 59abd83672 (drivers: base: Introducing software nodes to the firmware node framework)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-26 10:50:36 +01:00
Colin Ian King 1d8f062ebc drivers: base: swnode: check if pointer p is NULL before dereferencing it
The pointer p can be potentially NULL as macro to_software_node can
return NULL.

Add null check on p before dereferencing it to avoid any NULL pointer
dereferences.

Detected by CoverityScan, CID#1476039 ("Explicit null dereferenced")

Fixes: 59abd83672 (drivers: base: Introducing software nodes to the firmware node framework)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-26 10:48:01 +01:00
Linus Torvalds e4b99d415c Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt department provides:

  Core updates:

   - Better spreading to NUMA nodes in the affinity management

   - Support for more than one set of interrupts to spread out to allow
     separate queues for separate functionality of a single device.

   - Decouple the non queue interrupts from being managed. Those are
     usually general interrupts for error handling etc. and those should
     never be shut down. This also a preparation to utilize the
     spreading mechanism for initial spreading of non-managed interrupts
     later.

   - Make the single CPU target selection in the matrix allocator more
     balanced so interrupts won't accumulate on single CPUs in certain
     situations.

   - A large spell checking patch so we don't end up fixing single typos
     over and over.

  Driver updates:

   - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)

   - Updates for the 8MQ, F1C100s platform drivers

   - A number of SPDX cleanups

   - A workaround for a very broken GICv3 implementation on msm8996
     which sports a botched register set.

   - A platform-msi fix to prevent memory leakage

   - Various cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  genirq/affinity: Add is_managed to struct irq_affinity_desc
  genirq/core: Introduce struct irq_affinity_desc
  genirq/affinity: Remove excess indentation
  irqchip/stm32: protect configuration registers with hwspinlock
  dt-bindings: interrupt-controller: stm32: Document hwlock properties
  irqchip: Add driver for imx-irqsteer controller
  dt-bindings/irq: Add binding for Freescale IRQSTEER multiplexer
  irqchip: Add driver for Cirrus Logic Madera codecs
  genirq: Fix various typos in comments
  irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible
  irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init()
  irqchip/irq-imx-gpcv2: Silence "fall through" warning
  irqchip/gic-v3: Add quirk for msm8996 broken registers
  irqchip/gic: Add support to device tree based quirks
  dt-bindings/gic-v3: Add msm8996 compatible string
  irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
  irqchip/sun4i: Move IC specific register offsets to struct
  irqchip/sun4i: Add a struct to hold global variables
  dt-bindings: interrupt-controller: Add suniv interrupt-controller
  irqchip: Add RDA8810PL interrupt driver
  ...
2018-12-25 15:17:51 -08:00
Linus Torvalds d8924c0d76 Device properties framework updates for 4.21-rc1
- Introduce "software nodes", analogous to the DT and ACPI firmware
    nodes except that they can be created by kernel code, in order to
    complement fwnodes representing real firmware nodes when they are
    incomplete (for example missing device properties) and to supply
    the primary fwnode when the firmware lacks hardware description
    for a device completely, and replace the "property_set" struct
    fwnode_handle type with software nodes (Heikki Krogerus).
 
  - Clean up the just introduced software nodes support and fix a commet
    in the graph-handling code (Colin Ian King, Marco Felsch).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcHMUXAAoJEILEb/54YlRxqJIP/2bDrVQphjXoZWC0/BAOjAMO
 1WIaS+LI1VpvnnSxVQllfGHSI4voKiF1fcnKMui/VjCaH/BYhh98RJtCoZ72fHHt
 WlKlMhNm2nQ5XibZP1Ge9u2NDkfebgOLTHkAam/7dMwxKBzxbK1ytcuggMnL2HRY
 9wv6N/y1iLmfFABE0WEV/a3715i5MmBxC5ApIBvjK4tRv+KpYaJ7i03+4qGxpnHY
 hGvQE0b49hJkBGwVeoEPz/3HpsJ1WYBj4Oi7UyVa8A/GyWaRdwLtUVmidBua4Dah
 1eVjpjj6vreuHRwpQbMPkMecSsdon7EzsoyWklAGKPXuA5GKmvoDoLu66DORH93O
 a3h60vq5SqsVhqJhzJpN7SZLAeGdQymSW0aABpKotKIrNVZMkWTIyxvPSw3PKnF0
 3dhgv1QUktKteuCLFfuLqp+vHbPEauOul4iPwElpno6LJ1xzVaf/sNXoHPJwBOs9
 LYHUsB8G9L3Y7qvDn4RpR3zYChFE6/J53U8B4P0g+lqV1nxz28ov00VwZJihdpcz
 wzj+lF53Tzf4gMiaIdjSsrWMtx7lNcAowYsbdb8nyng555HMaW/ROzw1gv/GB5hp
 2Iaru6+J4QGbwAaLlOVeGY0TenCJUuF+tF+ufVHujceehjAisDzF+zev0VivRv26
 UwRSmhd/g1tPsoeJVhQN
 =Z3Zj
 -----END PGP SIGNATURE-----

Merge tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "This introduces 'software nodes' that are analogous to the DT and ACPI
  firmware nodes except that they can be created by drivers themselves
  and do a couple of assorted cleanups.

  Specifics:

   - Introduce "software nodes", analogous to the DT and ACPI firmware
     nodes except that they can be created by kernel code, in order to
     complement fwnodes representing real firmware nodes when they are
     incomplete (for example missing device properties) and to supply
     the primary fwnode when the firmware lacks hardware description for
     a device completely, and replace the "property_set" struct
     fwnode_handle type with software nodes (Heikki Krogerus).

   - Clean up the just introduced software nodes support and fix a
     commet in the graph-handling code (Colin Ian King, Marco Felsch)"

* tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: fix fwnode_graph_get_next_endpoint() documentation
  drivers: base: swnode: remove need for a temporary string for the node name
  device property: Remove struct property_set
  device property: Move device_add_properties() to swnode.c
  drivers: base: Introducing software nodes to the firmware node framework
  ACPI / glue: Add acpi_platform_notify() function
  drivers core: Prepare support for multiple platform notifications
  driver core: platform: Remove duplicated device_remove_properties() call
2018-12-25 15:01:46 -08:00
Linus Torvalds b1669432b3 regmap: Updates for v4.21
This has been a busy release for the regmap-irq code, there's several
 new features been added, including an API cleanup for how we specify
 types that affected one existing driver (gpio-max77620):
 
  - Support for hardware that flags rising and falling edges on separate
    status bits from Bartosz Golaszewski.
  - Support for explicitly clearing interrupts before unmasking from
    Bartosz Golaszewski.
  - Support for level triggered IRQs from Matti Vaittinen.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwhMAUTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MI0B/9K27CbnGskQHZqWQxcFg1iVck/ZPty
 kqfIGYDafvqT2TaVL+tFM8kzjLB3dMuV3cbywppq6+pzEvR/BDzhUKbskNPSLjUo
 zNxKbwiBJPFLqlZORhzncuPcpRvrGGp120B+gr7lKOJgSG73u6bvOEzYaZbJzPb8
 KiKo5oFqB/wpj3Gw243RjYE+7yaM/i7IAR/mW//RoKMWYERv6koR+GL0jgalib4d
 mezH0ipO/SGDPorVOeUWxm/mlUYhEbitTa9+BtAYC/0+Nba1ns1p6dduchhXrAA0
 /cOCHHVypPSiKLxjth+FA20CbemALb6swoZztVWYNS+0jJ2/bkh1rCoB
 =aiDq
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "This has been a busy release for the regmap-irq code, there's several
  new features been added, including an API cleanup for how we specify
  types that affected one existing driver (gpio-max77620):

   - Support for hardware that flags rising and falling edges on
     separate status bits from Bartosz Golaszewski.

   - Support for explicitly clearing interrupts before unmasking from
     Bartosz Golaszewski.

   - Support for level triggered IRQs from Matti Vaittinen"

* tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: add an option to clear status registers on unmask
  regmap: regmap-irq/gpio-max77620: add level-irq support
  regmap: regmap-irq: Remove default irq type setting from core
  regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTE
  regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTE
  regmap: irq: handle HW using separate rising/falling edge interrupts
  regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits)
2018-12-25 14:48:06 -08:00
Rafael J. Wysocki 442a5d000a Merge branches 'pm-core', 'pm-qos', 'pm-domains' and 'pm-sleep'
* pm-core:
  PM-runtime: Switch autosuspend over to using hrtimers

* pm-qos:
  PM / QoS: Change to use DEFINE_SHOW_ATTRIBUTE macro

* pm-domains:
  PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()

* pm-sleep:
  PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-21 10:06:44 +01:00
David Howells e262e32d6b vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled
Only the mount namespace code that implements mount(2) should be using the
MS_* flags.  Suppress them inside the kernel unless uapi/linux/mount.h is
included.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
2018-12-20 16:32:56 +00:00
Dan Carpenter 16df1456aa mm, memory_hotplug: update a comment in unregister_memory()
The remove_memory_block() function was renamed to in commit
cc292b0b43 ("drivers/base/memory.c: rename remove_memory_block() to
remove_memory_section()").

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-20 16:33:18 +01:00
Yangtao Li c0b8a8709e component: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-20 16:33:18 +01:00
Mark Brown 58331d618b
Merge remote-tracking branch 'regmap/topic/irq' into regmap-next 2018-12-19 18:38:33 +00:00
Mark Brown 9b268ebe25
Merge branch 'regmap-4.21' into regmap-next 2018-12-19 18:38:31 +00:00
Bartosz Golaszewski c82ea33ead
regmap: irq: add an option to clear status registers on unmask
Some interrupt controllers whose interrupts are acked on read will set
the status bits for masked interrupts without changing the state of
the IRQ line.

Some chips have an additional "feature" where if those set bits are
not cleared before unmasking their respective interrupts, the IRQ
line will change the state and we'll interpret this as an interrupt
although it actually fired when it was masked.

Add a new field to the irq chip struct that tells the regmap irq chip
code to always clear the status registers before actually changing the
irq mask values.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19 18:38:13 +00:00
Matti Vaittinen 1c2928e3e3
regmap: regmap-irq/gpio-max77620: add level-irq support
Add level active IRQ support to regmap-irq irqchip. Change breaks
existing regmap-irq type setting. Convert the existing drivers which
use regmap-irq with trigger type setting (gpio-max77620) to work
with this new approach. So we do not magically support level-active
IRQs on gpio-max77620 - but add support to the regmap-irq for chips
which support them =)

We do not support distinguishing situation where HW supports rising
and falling edge detection but not both. Separating this would require
inventing yet another flags for IRQ types.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19 18:35:45 +00:00
Matti Vaittinen 84267d1b18
regmap: regmap-irq: Remove default irq type setting from core
The common code should not set IRQ type. Read HW defaults to the
cache at startup instead of forcing type to EDGE_BOTH. If
default setting is needed this should be done via normal
mechanisms or by chip specific code if normal mechanisms are not
suitable for some reason. Common regmap-irq code should not have
defaults hard-coded but keep the HW/boot defaults untouched.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19 17:52:54 +00:00
Daniel Vetter 4f4b374332 sysfs: Disable lockdep for driver bind/unbind files
This is the much more correct fix for my earlier attempt at:

https://lkml.org/lkml/2018/12/10/118

Short recap:

- There's not actually a locking issue, it's just lockdep being a bit
  too eager to complain about a possible deadlock.

- Contrary to what I claimed the real problem is recursion on
  kn->count. Greg pointed me at sysfs_break_active_protection(), used
  by the scsi subsystem to allow a sysfs file to unbind itself. That
  would be a real deadlock, which isn't what's happening here. Also,
  breaking the active protection means we'd need to manually handle
  all the lifetime fun.

- With Rafael we discussed the task_work approach, which kinda works,
  but has two downsides: It's a functional change for a lockdep
  annotation issue, and it won't work for the bind file (which needs
  to get the errno from the driver load function back to userspace).

- Greg also asked why this never showed up: To hit this you need to
  unregister a 2nd driver from the unload code of your first driver. I
  guess only gpus do that. The bug has always been there, but only
  with a recent patch series did we add more locks so that lockdep
  built a chain from unbinding the snd-hda driver to the
  acpi_video_unregister call.

Full lockdep splat:

[12301.898799] ============================================
[12301.898805] WARNING: possible recursive locking detected
[12301.898811] 4.20.0-rc7+ #84 Not tainted
[12301.898815] --------------------------------------------
[12301.898821] bash/5297 is trying to acquire lock:
[12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80
[12301.898841] but task is already holding lock:
[12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898856] other info that might help us debug this:
[12301.898862]  Possible unsafe locking scenario:
[12301.898867]        CPU0
[12301.898870]        ----
[12301.898874]   lock(kn->count#39);
[12301.898879]   lock(kn->count#39);
[12301.898883] *** DEADLOCK ***
[12301.898891]  May be due to missing lock nesting notation
[12301.898899] 5 locks held by bash/5297:
[12301.898903]  #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0
[12301.898915]  #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190
[12301.898925]  #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898936]  #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240
[12301.898950]  #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40
[12301.898960] stack backtrace:
[12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84
[12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
[12301.898982] Call Trace:
[12301.898989]  dump_stack+0x67/0x9b
[12301.898997]  __lock_acquire+0x6ad/0x1410
[12301.899003]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899010]  ? find_held_lock+0x2d/0x90
[12301.899017]  ? mutex_spin_on_owner+0xe4/0x150
[12301.899023]  ? find_held_lock+0x2d/0x90
[12301.899030]  ? lock_acquire+0x90/0x180
[12301.899036]  lock_acquire+0x90/0x180
[12301.899042]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899049]  __kernfs_remove+0x296/0x310
[12301.899055]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899060]  ? kernfs_name_hash+0xd/0x80
[12301.899066]  ? kernfs_find_ns+0x6c/0x100
[12301.899073]  kernfs_remove_by_name_ns+0x3b/0x80
[12301.899080]  bus_remove_driver+0x92/0xa0
[12301.899085]  acpi_video_unregister+0x24/0x40
[12301.899127]  i915_driver_unload+0x42/0x130 [i915]
[12301.899160]  i915_pci_remove+0x19/0x30 [i915]
[12301.899169]  pci_device_remove+0x36/0xb0
[12301.899176]  device_release_driver_internal+0x185/0x240
[12301.899183]  unbind_store+0xaf/0x180
[12301.899189]  kernfs_fop_write+0x104/0x190
[12301.899195]  __vfs_write+0x31/0x180
[12301.899203]  ? rcu_read_lock_sched_held+0x6f/0x80
[12301.899209]  ? rcu_sync_lockdep_assert+0x29/0x50
[12301.899216]  ? __sb_start_write+0x13c/0x1a0
[12301.899221]  ? vfs_write+0x17f/0x1b0
[12301.899227]  vfs_write+0xb9/0x1b0
[12301.899233]  ksys_write+0x50/0xc0
[12301.899239]  do_syscall_64+0x4b/0x180
[12301.899247]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[12301.899253] RIP: 0033:0x7f452ac7f7a4
[12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
[12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4
[12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001
[12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730
[12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d
[12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d

Looking around I've noticed that usb and i2c already handle similar
recursion problems, where a sysfs file can unbind the same type of
sysfs somewhere else in the hierarchy. Relevant commits are:

commit 356c05d58a
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Mon May 14 13:30:03 2012 -0400

    sysfs: get rid of some lockdep false positives

commit e9b526fe70
Author: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Date:   Fri May 17 14:56:35 2013 +0200

    i2c: suppress lockdep warning on delete_device

Implement the same trick for driver bind/unbind.

v2: Put the macro into bus.c (Greg).

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 15:58:40 +01:00
Yangtao Li d32dcc6c69 PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
We already have the DEFINE_SHOW_ATTRIBUTE, There is no need to define
such a macro, so remove define_genpd_open_function and
define_genpd_debugfs_fops.

Convert them to DEFINE_SHOW_ATTRIBUTE.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-19 10:37:06 +01:00
Vincent Guittot 8234f6734c PM-runtime: Switch autosuspend over to using hrtimers
PM-runtime uses the timer infrastructure for autosuspend. This implies
that the minimum time before autosuspending a device is in the range
of 1 tick included to 2 ticks excluded
 -On arm64 this means between 4ms and 8ms with default jiffies
  configuration
 -And on arm, it is between 10ms and 20ms

These values are quite high for embedded systems which sometimes want
the duration to be in the range of 1 ms.

It is possible to switch autosuspend over to using hrtimers to get
finer granularity for short durations and take advantage of slack to
retain some margins and get long timeouts with minimum wakeups.

On an arm64 platform that uses 1ms for autosuspending timeout of its
GPU, idle power is reduced by 10% with hrtimer.

The latency impact on arm64 hikey octo cores is:
 - mark_last_busy: from 1.11 us to 1.25 us
 - rpm_suspend: from 15.54 us to 15.38 us
[Only the code path of rpm_suspend() that starts hrtimer has been
measured.]

arm64 image (arm64 default defconfig) decreases by around 3KB
with following details:

$ size vmlinux-timer
   text	   data	    bss	    dec	    hex	filename
12034646	6869268	 386840	19290754	1265a82	vmlinux

$ size vmlinux-hrtimer
   text	   data	    bss	    dec	    hex	filename
12030550	6870164	 387032	19287746	1264ec2	vmlinux

The latency impact on arm 32bits snowball dual cores is :
 - mark_last_busy: from 0.31 us usec to 0.77 us
 - rpm_suspend: from 6.83 us to 6.67 usec

The increase of the image for snowball platform that I used for
testing performance impact, is neglictable (244B).

$ size vmlinux-timer
   text	   data	    bss	    dec	    hex	filename
7157961	2119580	 264120	9541661	 91981d	build-ux500/vmlinux

size vmlinux-hrtimer
   text	   data	    bss	    dec	    hex	filename
7157773	2119884	 264248	9541905	 919911	vmlinux-hrtimer

And arm 32bits image (multi_v7_defconfig) increases by around 1.7KB
with following details:

$ size vmlinux-timer
   text	   data	    bss	    dec	    hex	filename
13304443	6803420	 402768	20510631	138f7a7	vmlinux

$ size vmlinux-hrtimer
   text	   data	    bss	    dec	    hex	filename
13304299	6805276	 402768	20512343	138fe57	vmlinux

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-19 10:31:50 +01:00
Rafael J. Wysocki e121a83374 driver core: Add missing dev->bus->need_parent_lock checks
__device_release_driver() has to check dev->bus->need_parent_lock
before dropping the parent lock and acquiring it again as it may
attempt to drop a lock that hasn't been acquired or lock a device
that shouldn't be locked and create a lock imbalance.

Fixes: 8c97a46af0 (driver core: hold dev's parent lock when needed)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 10:08:34 +01:00
Marco Felsch f569da8c99 device property: fix fwnode_graph_get_next_endpoint() documentation
Sync documentation with code.

Fixes: 07bb80d40b (device property: Add support for remote endpoints)
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-18 23:39:45 +01:00
Thomas Gleixner ff3730a497 irqchip updates for 4.21
- A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)
 - Updates for new (and old) platforms (i.MX8MQ, F1C100s)
 - A number of SPDX cleanups
 - A workaround for a very broken GICv3 implementation
 - A platform-msi fix
 - Various cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlwZI8cVHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDyokP+gKoKbZMc1E7dX6WxUrKh2N+fMJF
 uVbuGF2s57CLG955YNuyo8BK4meWJIHGO3JahwE8I/9eu0G7PaudYvpZgP7s/sxD
 XHLWFVHB1mq4lExMcluT0jG4ZpX7EKvYB1KGqgYM1ScOS9Uubb4ZG9T5GPhUT/YM
 w1BAtHaZmCAg8d0wNPUMaAFc9Bd2B9Z1C8nwS+wpdJRxYxE9x8BES42r95rbXCG6
 5Cq2ol/NbF4RbFodel4YdiAIKfrQtXyQ3N3twC5GRXln4XLjUfzs4mA5rxLLoeGZ
 2UGXeIk0GcokSWF/e+0p3tQDWKwdbqoBhbRbqk7u5ZWuEWTRf4Zot3IlCVpJAMM3
 iRw5XChWxovC+/oqgin4sp1gNpSRgf5mMvR1EauR5DTVtwlOjUBKaPEyKLrPITOo
 B42EJugJ94J0YVdT9RUJsOSXIdOiYFE6I9F4i/XioLYq5FItBB56/81ARZgEncpg
 FEdtseCCtRC3WWGzghxZsSzCW3iGi8wdddRdZmOXCNdPtH03TZg0dGPS+KIn8Soh
 eVSGImV/4efN6hh6fSryeR02fYT3DKGgDQUiV4e/1SOSzxy6VjjrOh48tB8qn/M7
 NbFZMqDKnltsXT2C+bh6zjhorbVCkj8AEtx1oF0d7iIyBxor3eHUelTz6VglNlLq
 RFetH+Yjh9nt9ReO
 =1Mk9
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

 - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)
 - Updates for new (and old) platforms (i.MX8MQ, F1C100s)
 - A number of SPDX cleanups
 - A workaround for a very broken GICv3 implementation
 - A platform-msi fix
 - Various cleanups
2018-12-18 18:37:27 +01:00
Yangtao Li 580d48573c
regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-17 19:06:13 +00:00
Yangtao Li 32fa7b852f
regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-17 19:03:36 +00:00
Rafael J. Wysocki bcbeef5f00 Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull more operating performance points (OPP) framework changes for v4.21
from Viresh Kumar:

"- Fix missing OPP debugfs directory (Viresh Kumar).

 - Make genpd performance states orthogonal to idlestates (Ulf
   Hansson).

 - Propagate performance state changes from genpd to its master (Viresh
   Kumar).

 - Minor improvement of some OPP helpers (Viresh Kumar)."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  PM / Domains: Propagate performance state updates
  PM / Domains: Factorize dev_pm_genpd_set_performance_state()
  PM / Domains: Save OPP table pointer in genpd
  OPP: Don't return 0 on error from of_get_required_opp_performance_state()
  OPP: Add dev_pm_opp_xlate_performance_state() helper
  OPP: Improve _find_table_of_opp_np()
  PM / Domains: Make genpd performance states orthogonal to the idlestates
  OPP: Fix missing debugfs supply directory for OPPs
  OPP: Use opp_table->regulators to verify no regulator case
2018-12-14 12:53:34 +01:00
Viresh Kumar 18edf49c45 PM / Domains: Propagate performance state updates
Currently a genpd only handles the performance state requirements from
the devices under its control. This commit extends that to also handle
the performance state requirement(s) put on the master genpd by its
sub-domains. There is a separate value required for each master that
the genpd has and so a new field is added to the struct gpd_link
(link->performance_state), which represents the link between a genpd and
its master. The struct gpd_link also got another field
prev_performance_state, which is used by genpd core as a temporary
variable during transitions.

On a call to dev_pm_genpd_set_performance_state(), the genpd core first
updates the performance state of the masters of the device's genpd and
then updates the performance state of the genpd. The masters do the same
and propagate performance state updates to their masters before updating
their own. The performance state transition from genpd to its master is
done with the help of dev_pm_opp_xlate_performance_state(), which looks
at the OPP tables of both the domains to translate the state.

Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14 16:28:18 +05:30
Viresh Kumar cd50c6d3eb PM / Domains: Factorize dev_pm_genpd_set_performance_state()
Separate out _genpd_set_performance_state() and
_genpd_reeval_performance_state() from
dev_pm_genpd_set_performance_state() to handle performance state update
related stuff. This will be used by a later commit.

Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14 16:28:16 +05:30
Viresh Kumar 1067ae3e42 PM / Domains: Save OPP table pointer in genpd
dev_pm_genpd_set_performance_state() will be required to call
dev_pm_opp_xlate_performance_state() going forward to translate from
performance state of a sub-domain to performance state of its master.
And dev_pm_opp_xlate_performance_state() needs pointers to the OPP
tables of both genpd and its master.

Lets fetch and save them while the OPP tables are added. Fetching the
OPP tables should never fail as we just added the OPP tables and so add
a WARN_ON() for such a bug instead of full error paths.

Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14 16:28:14 +05:30
Ulf Hansson 68de2fe57a PM / Domains: Make genpd performance states orthogonal to the idlestates
It's quite questionable whether genpd internally should care about if the
corresponding PM domain for a device is powered on, as to allow setting a
new performance state for it. The assumptions creates an unnecessary
limitation at this point, for both consumers and providers, but more
importantly it also makes the code more complicated.

Therefore, let's simplify the code to allow setting a performance state, by
invoking the ->set_performance_state() callback, no matter whether the PM
domain is powered on or off.

Do note, this change means genpd providers needs to restore the performance
state themselves during power on, via the ->power_on() callback. Moreover,
they may also need to check that the PM domain is powered on, from their
->set_performance_state() callback, before deciding to update the state.

Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14 16:19:10 +05:30
Robin Murphy e5361ca29f ACPI / scan: Refactor _CCA enforcement
Rather than checking the DMA attribute at each callsite, just pass it
through for acpi_dma_configure() to handle directly. That can then deal
with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly
installing dummy DMA ops instead of just skipping setup entirely. This
will then free up the dev->dma_ops == NULL case for some valuable
fastpath optimisations.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:13 +01:00
Christoph Hellwig 05887cb610 dma-mapping: move dma_get_required_mask to kernel/dma
dma_get_required_mask should really be with the rest of the DMA mapping
implementation instead of in drivers/base as a lone outlier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:09 +01:00
Bartosz Golaszewski bc998a7303
regmap: irq: handle HW using separate rising/falling edge interrupts
Some interrupt controllers use separate bits for controlling rising
and falling edge interrupts in the mask register i.e. they have one
interrupt for rising edge and one for falling.

We already handle the case where we have a single interrupt in the
mask register and a separate type configuration register.

Add a new switch to regmap_irq_chip which tells the framework to use
the mask_base address for configuring the edge of the interrupts that
define type_falling/rising_mask values.

For such interrupts we never update the type_base bits. For interrupts
that don't define type masks or their regmap irq chip doesn't set the
type_in_mask to true everything stays the same.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13 17:07:46 +00:00
Miquel Raynal 81b1e6e6a8 platform-msi: Free descriptors in platform_msi_domain_free()
Since the addition of platform MSI support, there were two helpers
supposed to allocate/free IRQs for a device:

    platform_msi_domain_alloc_irqs()
    platform_msi_domain_free_irqs()

In these helpers, IRQ descriptors are allocated in the "alloc" routine
while they are freed in the "free" one.

Later, two other helpers have been added to handle IRQ domains on top
of MSI domains:

    platform_msi_domain_alloc()
    platform_msi_domain_free()

Seen from the outside, the logic is pretty close with the former
helpers and people used it with the same logic as before: a
platform_msi_domain_alloc() call should be balanced with a
platform_msi_domain_free() call. While this is probably what was
intended to do, the platform_msi_domain_free() does not remove/free
the IRQ descriptor(s) created/inserted in
platform_msi_domain_alloc().

One effect of such situation is that removing a module that requested
an IRQ will let one orphaned IRQ descriptor (with an allocated MSI
entry) in the device descriptors list. Next time the module will be
inserted back, one will observe that the allocation will happen twice
in the MSI domain, one time for the remaining descriptor, one time for
the new one. It also has the side effect to quickly overshoot the
maximum number of allocated MSI and then prevent any module requesting
an interrupt in the same domain to be inserted anymore.

This situation has been met with loops of insertion/removal of the
mvpp2.ko module (requesting 15 MSIs each time).

Fixes: 552c494a76 ("platform-msi: Allow creation of a MSI-based stacked irq domain")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13 09:35:31 +00:00
Colin Ian King d84f18d667 drivers: base: swnode: remove need for a temporary string for the node name
Currently the node name is being formatting into a temporary string
node_name, however, kobject_init_and_add allows one to format up
a node name, so use that instead. This removes the need for the
node_name string and also cleans up the following warning:

Fixes clang warning:
warning: format string is not a string literal (potentially
insecure) [-Wformat-security]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11 12:18:15 +01:00
Andy Shevchenko a07995be61 PM: Switch to use %ptR
Use %ptR instead of open coded variant to print content of
struct rtc_time in human readable format.

Cc: linux-pm@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-10 22:40:18 +01:00
Rafael J. Wysocki 83fd1e5249 Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework changes for v4.21
from Viresh Kumar.

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  OPP: Remove of_dev_pm_opp_find_required_opp()
  OPP: Rename and relocate of_genpd_opp_to_performance_state()
  OPP: Configure all required OPPs
  OPP: Add dev_pm_opp_{set|put}_genpd_virt_dev() helper
  PM / Domains: Add genpd_opp_to_performance_state()
  OPP: Populate OPPs from "required-opps" property
  OPP: Populate required opp tables from "required-opps" property
  OPP: Separate out custom OPP handler specific code
  OPP: Identify and mark genpd OPP tables
  PM / Domains: Rename genpd virtual devices as virt_dev
2018-12-10 12:11:04 +01:00
Peter Rajnoha df44b47965 kobject: return error code if writing /sys/.../uevent fails
Propagate error code back to userspace if writing the /sys/.../uevent
file fails. Before, the write operation always returned with success,
even if we failed to recognize the input string or if we failed to
generate the uevent itself.

With the error codes properly propagated back to userspace, we are
able to react in userspace accordingly by not assuming and awaiting
a uevent that is not delivered.

Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06 16:07:43 +01:00
Alexander Duyck c37d721c68 driver core: Move async_synchronize_full call
Move the async_synchronize_full call out of __device_release_driver and
into driver_detach.

The idea behind this is that the async_synchronize_full call will only
guarantee that any existing async operations are flushed. This doesn't do
anything to guarantee that a hotplug event that may occur while we are
doing the release of the driver will not be asynchronously scheduled.

By moving this into the driver_detach path we can avoid potential deadlocks
as we aren't holding the device lock at this point and we should not have
the driver we want to flush loaded so the flush will take care of any
asynchronous events the driver we are detaching might have scheduled.

Fixes: 765230b5f0 ("driver-core: add asynchronous probing support for drivers")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06 16:00:43 +01:00
Andy Shevchenko 99fef587ff driver core: platform: Respect return code of platform_device_register_full()
The platform_device_register_full() might return an error pointer. If we
instantiate platform device which is optional we may simplify the routine at
removal stage by simply calling platform_device_unregister(). For now it
requires to check parameter for being an error pointer in each caller.

To make users' life easier, check for an error pointer inside driver core.

Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06 14:00:06 +01:00
Ezequiel Garcia 186bddb28f kref/kobject: Improve documentation
The current kref and kobject documentation may be
insufficient to understand these common pitfalls regarding
object lifetime and object releasing.

Add a bit more documentation and improve the warnings
seen by the user, pointing to the right piece of documentation.

Also, it's important to understand that making fun of people
publicly is not at all helpful, doesn't provide any value,
and it's not a healthy way of encouraging developers to do better.

"Mocking mercilessly" will, if anything, make developers feel bad
and go away. This kind of behavior should not be encouraged or justified.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06 13:57:03 +01:00
David Hildenbrand 3f8e917853 drivers/base/memory.c: Use DEVICE_ATTR_RO and friends
Let's use the easier to read (and not mess up) variants:
- Use DEVICE_ATTR_RO
- Use DEVICE_ATTR_WO
- Use DEVICE_ATTR_RW
instead of the more generic DEVICE_ATTR() we're using right now.

We have to rename most callback functions. By fixing the intendations we
can even save some LOCs.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06 13:54:14 +01:00
Greg Kroah-Hartman 7782b57ccc Merge 4.20-rc5 into driver-core-next
We need the fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 07:54:31 +01:00
Kaitao cheng f88184bfee driver core: Replace simple_strto{l,ul} by kstrtou{l,ul}
The simple_strto{l,ul} are deprecated, use kstrtou{l,ul} instead.

Signed-off-by: Kaitao cheng <pilgrimtao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27 12:00:52 +01:00
Heikki Krogerus caf35cd522 device property: Remove struct property_set
Replacing struct property_set with the software nodes that
were just introduced.

The API and functionality for adding properties to devices
remains the same, however, the goal is to convert the
drivers to use the API for software nodes when the device
has no real firmware node, and use the old API only when
"extra" build-in properties are needed.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-26 18:19:11 +01:00
Heikki Krogerus ed1cdf31f9 device property: Move device_add_properties() to swnode.c
Concentrating struct property_entry processing to
drivers/base/swnode.c

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-26 18:19:11 +01:00
Heikki Krogerus 59abd83672 drivers: base: Introducing software nodes to the firmware node framework
Software node is a new struct fwnode_handle type that can be
used to describe devices in kernel (software). It is meant
to complement fwnodes representing real firmware nodes when
they are incomplete (for example missing device properties)
and to supply the primary fwnode when the firmware lacks
hardware description for a device completely.

The software node type is really meant to replace the
currently used "property_set" struct fwnode_handle type. The
handling of struct property_set is glued to the generic
device property handling code, and it is not possible to
create a struct property_set independently from the device
that it is bind to. struct property_set is only created when
device properties are added to already initialized struct
device, and control of it is only possible from the generic
property handling code.

Software nodes are instead designed to be created
independently from the device entries (struct device). It
makes them much more flexible, as then the device meant to
be bind to the node can be created at a later time, and from
another location. It is also possible to bind multiple
devices to a single software node if needed.

The software node implementation also includes support for
node hierarchy, which was the main motivation for this
commit. The node hierarchy was something that was requested
for the struct property_set, but it did not seem reasonable
to try to extend the property_set support for that purpose.
struct property_set was really meant only for device
property handling like the name suggests.

Support for struct property_set is not yet removed in this
commit, but it will be in the following one.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-26 18:19:11 +01:00
Heikki Krogerus 7847a1455f ACPI / glue: Add acpi_platform_notify() function
Instead of relying on the "platform_notify" callback hook,
introducing separate notification function
acpi_platform_notify() and calling that directly from
drivers core when device entries are added and removed.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-26 18:19:11 +01:00
Heikki Krogerus 07de0e86fe drivers core: Prepare support for multiple platform notifications
Since it should be possible to support several hardware
description models at the same time (at least in theory),
for example ACPI and devicetree on a running system, the
platform notifications need to be handled differently.

For now a single "platform_notify" callback function was
used to notify the underlying base system which is in charge
of the hardware description when a new device entry was
added to the system, but that callback is available to only
a single base system at the time. This will add a function
device_platform_notify() and replace all direct
platform_notify() calls with it.

device_platform_notify() will first simply call the
platform_notify() callback, so this commit has no functional
affect, however, the idea is that individual base systems
will put their direct notification calls there instead of
using the platform_notify function pointer.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-26 18:19:11 +01:00
Heikki Krogerus 2d51ac9086 driver core: platform: Remove duplicated device_remove_properties() call
device_remove_properties() is called for every device in device_del().

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-26 18:19:11 +01:00
Alexey Brodkin a66d972465 devres: Align data[] to ARCH_KMALLOC_MINALIGN
Initially we bumped into problem with 32-bit aligned atomic64_t
on ARC, see [1]. And then during quite lengthly discussion Peter Z.
mentioned ARCH_KMALLOC_MINALIGN which IMHO makes perfect sense.
If allocation is done by plain kmalloc() obtained buffer will be
ARCH_KMALLOC_MINALIGN aligned and then why buffer obtained via
devm_kmalloc() should have any other alignment?

This way we at least get the same behavior for both types of
allocation.

[1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004009.html
[2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004036.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@vger.kernel.org> # 4.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11 11:40:04 -08:00
Randy Dunlap dbf03d6569 driver core: fix comments for device_block_probing()
Correct function name and spelling/typo for device_block_probing()
in drivers/base/dd.c.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11 09:54:42 -08:00
Muchun Song 63c9804705 driver core: Replace simple_strtol by kstrtoint
The simple_strtol() function is deprecated, use kstrtoint() instead.

Signed-off-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11 09:54:42 -08:00
Viresh Kumar 4c6a343e57 OPP: Rename and relocate of_genpd_opp_to_performance_state()
The OPP core already has the performance state values for each of the
genpd's OPPs and there is no need to call the genpd callback again to
get the performance state for the case where the end device doesn't have
an OPP table and has the "required-opps" property directly in its node.

This commit renames of_genpd_opp_to_performance_state() as
of_get_required_opp_performance_state() and moves it to the OPP core, as
it is all about OPP stuff now.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-05 07:40:43 +05:30
Viresh Kumar e38f89d310 PM / Domains: Add genpd_opp_to_performance_state()
The OPP core currently stores the performance state in the consumer
device's OPP table, but that is going to change going forward and
performance state will rather be set directly in the genpd's OPP table.

For that we need to get the performance state for genpd's device
structure (genpd->dev) instead of the consumer device's structure. Add a
new helper to do that.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-05 07:40:43 +05:30
Viresh Kumar 560928b27b PM / Domains: Rename genpd virtual devices as virt_dev
There are several struct device instances that genpd core handles. The
most common one is the consumer device structure, which is named
(correctly) as "dev" within genpd core. The second one is the genpd's
device structure, referenced as genpd->dev. The third one is the virtual
device structures created by the genpd core to represent the consumer
device for multiple power domain case, currently named as genpd_dev. The
naming of these virtual devices isn't very clear or readable and it
looks more like the genpd->dev.

Rename the virtual device instances within the genpd core as "virt_dev".

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-05 07:40:42 +05:30
David Hildenbrand 381eab4a6e mm/memory_hotplug: fix online/offline_pages called w.o. mem_hotplug_lock
There seem to be some problems as result of 30467e0b3b ("mm, hotplug:
fix concurrent memory hot-add deadlock"), which tried to fix a possible
lock inversion reported and discussed in [1] due to the two locks
	a) device_lock()
	b) mem_hotplug_lock

While add_memory() first takes b), followed by a) during
bus_probe_device(), onlining of memory from user space first took a),
followed by b), exposing a possible deadlock.

In [1], and it was decided to not make use of device_hotplug_lock, but
rather to enforce a locking order.

The problems I spotted related to this:

1. Memory block device attributes: While .state first calls
   mem_hotplug_begin() and the calls device_online() - which takes
   device_lock() - .online does no longer call mem_hotplug_begin(), so
   effectively calls online_pages() without mem_hotplug_lock.

2. device_online() should be called under device_hotplug_lock, however
   onlining memory during add_memory() does not take care of that.

In addition, I think there is also something wrong about the locking in

3. arch/powerpc/platforms/powernv/memtrace.c calls offline_pages()
   without locks. This was introduced after 30467e0b3b. And skimming over
   the code, I assume it could need some more care in regards to locking
   (e.g. device_online() called without device_hotplug_lock. This will
   be addressed in the following patches.

Now that we hold the device_hotplug_lock when
- adding memory (e.g. via add_memory()/add_memory_resource())
- removing memory (e.g. via remove_memory())
- device_online()/device_offline()

We can move mem_hotplug_lock usage back into
online_pages()/offline_pages().

Why is mem_hotplug_lock still needed? Essentially to make
get_online_mems()/put_online_mems() be very fast (relying on
device_hotplug_lock would be very slow), and to serialize against
addition of memory that does not create memory block devices (hmm).

[1] http://driverdev.linuxdriverproject.org/pipermail/ driverdev-devel/
    2015-February/065324.html

This patch is partly based on a patch by Vitaly Kuznetsov.

Link: http://lkml.kernel.org/r/20180925091457.28651-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:17 -07:00
David Hildenbrand 8df1d0e4a2 mm/memory_hotplug: make add_memory() take the device_hotplug_lock
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3b ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
	drivers/xen/balloon.c
	arch/powerpc/platforms/powernv/memtrace.c
	drivers/s390/char/sclp_cmd.c
	drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:17 -07:00
Mike Rapoport 57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Vlastimil Babka 61f94e18de mm, proc: add KReclaimable to /proc/meminfo
The vmstat NR_KERNEL_MISC_RECLAIMABLE counter is for kernel non-slab
allocations that can be reclaimed via shrinker.  In /proc/meminfo, we can
show the sum of all reclaimable kernel allocations (including slab) as
"KReclaimable".  Add the same counter also to per-node meminfo under /sys

With this counter, users will have more complete information about kernel
memory usage.  Non-slab reclaimable pages (currently just the ION
allocator) will not be missing from /proc/meminfo, making users wonder
where part of their memory went.  More precisely, they already appear in
MemAvailable, but without the new counter, it's not obvious why the value
in MemAvailable doesn't fully correspond with the sum of other counters
participating in it.

Link: http://lkml.kernel.org/r/20180731090649.16028-6-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Linus Torvalds 26873acacb Driver core patches for 4.20-rc1
Driver core patches for 4.20-rc1
 
 Here is a small number of driver core patches for 4.20-rc1.
 
 Not much happened here this merge window, only a very tiny number of
 patches that do:
 	- add BUS_ATTR_WO() for use by drivers
 	- component error path fixes
 	- kernfs range check fix
 	- other tiny error path fixes and const changes
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9Lhtw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykHTgCguaJ3SgRefuC/WijjqboTC/SikCoAnRVTUxfU
 v8BisSN22kR3jmxwsXud
 =/IvY
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small number of driver core patches for 4.20-rc1.

  Not much happened here this merge window, only a very tiny number of
  patches that do:

   - add BUS_ATTR_WO() for use by drivers

   - component error path fixes

   - kernfs range check fix

   - other tiny error path fixes and const changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  devres: provide devm_kstrdup_const()
  mm: move is_kernel_rodata() to asm-generic/sections.h
  devres: constify p in devm_kfree()
  driver core: add BUS_ATTR_WO() macro
  kernfs: Fix range checks in kernfs_get_target_path
  component: fix loop condition to call unbind() if bind() fails
  drivers/base/devtmpfs.c: don't pretend path is const in delete_path
  kernfs: update comment about kernfs_path() return value
2018-10-26 08:42:25 -07:00
Linus Torvalds 5947a64a7e Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt brigade came up with the following updates:

   - Driver for the Marvell System Error Interrupt machinery

   - Overhaul of the GIC-V3 ITS driver

   - Small updates and fixes all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  genirq: Fix race on spurious interrupt detection
  softirq: Fix typo in __do_softirq() comments
  genirq: Fix grammar s/an /a /
  irqchip/gic: Unify GIC priority definitions
  irqchip/gic-v3: Remove acknowledge loop
  dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller
  dt-bindings/interrupt-controller: Update Marvell ICU bindings
  irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI)
  arm64: marvell: Enable SEI driver
  irqchip/irq-mvebu-sei: Add new driver for Marvell SEI
  irqchip/irq-mvebu-icu: Support ICU subnodes
  irqchip/irq-mvebu-icu: Disociate ICU and NSR
  irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts
  irqchip/irq-mvebu-icu: Fix wrong private data retrieval
  dt-bindings/interrupt-controller: Fix Marvell ICU length in the example
  genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
  dt-bindings: irqchip: renesas-irqc: Document r8a7744 support
  dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support
  irqchip/pdc: Setup all edge interrupts as rising edge at GIC
  irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
  ...
2018-10-25 11:43:47 -07:00
Linus Torvalds 42f52e1c59 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes are:

   - Migrate CPU-intense 'misfit' tasks on asymmetric capacity systems,
     to better utilize (much) faster 'big core' CPUs. (Morten Rasmussen,
     Valentin Schneider)

   - Topology handling improvements, in particular when CPU capacity
     changes and related load-balancing fixes/improvements (Morten
     Rasmussen)

   - ... plus misc other improvements, fixes and updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  sched/completions/Documentation: Add recommendation for dynamic and ONSTACK completions
  sched/completions/Documentation: Clean up the document some more
  sched/completions/Documentation: Fix a couple of punctuation nits
  cpu/SMT: State SMT is disabled even with nosmt and without "=force"
  sched/core: Fix comment regarding nr_iowait_cpu() and get_iowait_load()
  sched/fair: Remove setting task's se->runnable_weight during PELT update
  sched/fair: Disable LB_BIAS by default
  sched/pelt: Fix warning and clean up IRQ PELT config
  sched/topology: Make local variables static
  sched/debug: Use symbolic names for task state constants
  sched/numa: Remove unused numa_stats::nr_running field
  sched/numa: Remove unused code from update_numa_stats()
  sched/debug: Explicitly cast sched_feat() to bool
  sched/core: Disable SD_PREFER_SIBLING on asymmetric CPU capacity domains
  sched/fair: Don't move tasks to lower capacity CPUs unless necessary
  sched/fair: Set rq->rd->overload when misfit
  sched/fair: Wrap rq->rd->overload accesses with READ/WRITE_ONCE()
  sched/core: Change root_domain->overload type to int
  sched/fair: Change 'prefer_sibling' type to bool
  sched/fair: Kick nohz balance if rq->misfit_task_load
  ...
2018-10-23 15:00:03 +01:00
Linus Torvalds 58a0228707 ACPI updates for 4.20-rc1
- Fix ACPICA issues related to the handling of module-level AML
    and make the ACPI initialization code parse ECDT before loading
    the definition block tables (Erik Schmauss).
 
  - Update ACPICA to upstream revision 20181003 including fixes
    related to the ill-defined "generic serial bus" and the handling
    of the _REG object (Bob Moore).
 
  - Fix some issues with system-wide suspend/resume on Intel BYT/CHT
    related to the handling of I2C controllers in the ACPI LPSS driver
    for Intel SoCs (Hans de Goede).
 
  - Modify the ACPI namespace scanning code to enumerate INT33FE HID
    devices as platform devices with I2C resources to avoid device
    enumeration problems on boards with Dollar Cove or Whiskey Cove
    Intel PMICs (Hans de Goede).
 
  - Prevent ACPICA from using ktime_get() during early resume from
    system-wide suspend before resuming the timekeeping which generally
    is unsafe and triggers a warning from the timekeeping code (Bart
    Van Assche).
 
  - Add low-level real time clock support to the ACPI Time and Aalarm
    Device (TAD) driver (Rafael Wysocki).
 
  - Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and
    Oopses when removing modules (Ronald Tschalär).
 
  - Fix the ACPI PPTT parsing code to handle architecturally unknown
    cache types properly (Jeffrey Hugo).
 
  - Fix initialization issue in the ACPI processor driver (Dou Liyang).
 
  - Clean up the code in several places (Andy Shevchenko, Bartlomiej
    Zolnierkiewicz, David Arcari, zhong jiang).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbya1ZAAoJEILEb/54YlRxGxwQAKLDDN3lDvSJqKrFiFbgpvCz
 f8hSmVmWvHqJwiKmP0OllVvk31xr4BIf5BxdxMVSK/+OFAEv3WBv3ajZl5y4gxPx
 g+3u8fiBCX4OX2iQX5B4cfaEGrZfUk87S7yW3H/pfgDphQ4SqsEvKMhxB9LveHjL
 YZW4kEjQZskNL/17wbAyI2XG3udQhzbSMVezk4xzByly9b0TcRSdbx6qKjh5rmEK
 658nZxc7EM2JyCsGIunJhKuXvcsR2SrHbTpk8h0GW54NBuDkF5nRmsVI8MbdDRpi
 cnW62robM6rso2ev/sYFE1OQkm7tf8MLc558MTeib35NPa9ass7rPdfroxYLUv/r
 x3Jo7WzHLhGnDhPXdRCFTVuc5fp0huEM35JXhjmbTJtcugaDYrYnp6pxtaMG2CPi
 XzPGe4lK7QlW5ojCJ0fnpbOKqhryI4kPZHmZNLYiC0dOwKBTHnS7DWNlIxazMnaK
 iUxZjeF+mu5qIiL/+s618KgKNyRZNjbhTZZ637SOPeyxbDSKHs1Mm1Fu24+UPUVF
 9XWhPPHPDSKF7fGeJJbxdUF+FAbu3sJJBDZdvD41e642qCVy662dvog5PdVITrgt
 iB6Y/UHgpsHhxCT7NtPuIVLNvMxfMdZwnUlncmVqQg/VaRfGZ8STU9wrhcok1WU3
 l/9QhTkXxg0vPhcLAvCF
 =arbR
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These fix ACPICA issues related to the handling of module-level AML,
  fix an ordering issue during ACPI initialization, update ACPICA to
  upstream revision 20181003 (including fixes mostly), fix issues with
  system-wide suspend/resume related to the ACPI driver for Intel SoCs
  (LPSS), fix device enumeration issues on boards with Dollar Cove or
  Whiskey Cove Intel PMICs, prevent ACPICA from calling ktime_get() in
  unsuitable conditions, update a few drivers and clean up some code in
  several places.

  Specifics:

   - Fix ACPICA issues related to the handling of module-level AML and
     make the ACPI initialization code parse ECDT before loading the
     definition block tables (Erik Schmauss).

   - Update ACPICA to upstream revision 20181003 including fixes related
     to the ill-defined "generic serial bus" and the handling of the
     _REG object (Bob Moore).

   - Fix some issues with system-wide suspend/resume on Intel BYT/CHT
     related to the handling of I2C controllers in the ACPI LPSS driver
     for Intel SoCs (Hans de Goede).

   - Modify the ACPI namespace scanning code to enumerate INT33FE HID
     devices as platform devices with I2C resources to avoid device
     enumeration problems on boards with Dollar Cove or Whiskey Cove
     Intel PMICs (Hans de Goede).

   - Prevent ACPICA from using ktime_get() during early resume from
     system-wide suspend before resuming the timekeeping which generally
     is unsafe and triggers a warning from the timekeeping code (Bart
     Van Assche).

   - Add low-level real time clock support to the ACPI Time and Aalarm
     Device (TAD) driver (Rafael Wysocki).

   - Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and
     Oopses when removing modules (Ronald Tschalär).

   - Fix the ACPI PPTT parsing code to handle architecturally unknown
     cache types properly (Jeffrey Hugo).

   - Fix initialization issue in the ACPI processor driver (Dou Liyang).

   - Clean up the code in several places (Andy Shevchenko, Bartlomiej
     Zolnierkiewicz, David Arcari, zhong jiang)"

* tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (33 commits)
  ACPI / scan: Create platform device for INT33FE ACPI nodes
  ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer()
  ACPI: probe ECDT before loading AML tables regardless of module-level code flag
  ACPICA: Remove acpi_gbl_group_module_level_code and only use acpi_gbl_execute_tables_as_methods instead
  ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes
  ACPICA: AML interpreter: add region addresses in global list during initialization
  ACPI: TAD: Add low-level support for real time capability
  ACPI: remove redundant 'default n' from Kconfig
  ACPI / SBS: Fix rare oops when removing modules
  ACPI / SBS: Fix GPE storm on recent MacBookPro's
  ACPI/PPTT: Handle architecturally unknown cache types
  drivers: base: cacheinfo: Do not populate sysfs for unknown cache types
  ACPICA: Update version to 20181003
  ACPICA: Never run _REG on system_memory and system_IO
  ACPICA: Split large interpreter file
  ACPICA: Update for field unit access
  ACPICA: Rename some of the Field Attribute defines
  ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocol
  ACPI / processor: Fix the return value of acpi_processor_ids_walk()
  ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq
  ...
2018-10-23 10:33:16 +01:00
Linus Torvalds 12dd08fa95 Power management updates for 4.20-rc1
- Backport hibernation bug fixes from x86-64 to x86-32 and
    consolidate hibernation handling on x86 to allow 32-bit
    systems to work in all of the cases in which 64-bit ones
    work (Zhimin Gu, Chen Yu).
 
  - Fix hibernation documentation (Vladimir D. Seleznev).
 
  - Update the menu cpuidle governor to fix a couple of issues
    with it, make it more efficient in some cases and clean it
    up (Rafael Wysocki).
 
  - Rework the cpuidle polling state implementation to make it
    more efficient (Rafael Wysocki).
 
  - Clean up the cpuidle core somewhat (Fieah Lim).
 
  - Fix the cpufreq conservative governor to take policy limits
    into account properly in some cases (Rafael Wysocki).
 
  - Add support for retrieving guaranteed performance information
    to the ACPI CPPC library and make the intel_pstate driver use
    it to expose the CPU base frequency via sysfs on systems with
    the hardware-managed P-states (HWP) feature enabled (Srinivas
    Pandruvada).
 
  - Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor).
 
  - Get rid of device_node.name printing from cpufreq (Rob Herring).
 
  - Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa).
 
  - Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju Das).
 
  - Update the dt-platdev cpufreq driver to allow RK3399 to have
    separate tunables per cluster (Dmitry Torokhov).
 
  - Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver
    (Christoph Hellwig).
 
  - Make the imx6q cpufreq driver read OCOTP through nvmem for
    imx6ul/imx6ull (Anson Huang).
 
  - Fix several bugs in the operating performance points (OPP)
    framework and make it more stable (Viresh Kumar, Dave Gerlach).
 
  - Update the devfreq subsystem to take changes in the APIs used
    by into account, fix some issues with it and make it stop
    print device_node.name directly (Bjorn Andersson, Enric Balletbo
    i Serra, Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong
    jiang).
 
  - Prepare the generic power domains (genpd) framework for dealing
    with domains containing CPUs (Ulf Hansson).
 
  - Prevent sysfs attributes representing low-power S0 residency
    counters from being exposed if low-power S0 support is not
    indicated in ACPI FADT (Rajneesh Bhardwaj).
 
  - Get rid of custom CPU features macros for Intel CPUs from the
    intel_idle and RAPL drivers (Andy Shevchenko).
 
  - Update the tasks freezer to list tasks that refused to freeze
    and caused a system transition to a sleep state to be aborted
    (Todd Brandt).
 
  - Update the pm-graph set of tools to v5.2 (Todd Brandt).
 
  - Fix some issues in the cpupower utility (Anders Roxell, Prarit
    Bhargava).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbyaznAAoJEILEb/54YlRxUkoP/iOroh5pMW7PDa1g8sG26bfN
 ICln5Tt9lv1Euk3QALc5r05kLjyObfoMoDwvH2oiM0TgwSw6G64tm/ansTsvbPpc
 DCk53d0/gSqv5B1dZxV6OUYoXP0Z5hD+nW+1dg6EiGr1h24kesdEXdSB09bfTUY3
 N4zUurWDUD92havuV3PakI/d/aOdxlwt9drwxv/cx4/gSYS0q5KtB2/N8YdWrk8Q
 1UNwZkQLO8I0URfp9bwvwG3VhgKn0SKpLHlajq9KzWDPRgCl32oB0tY+3fOHW9Q+
 djgMRA7xlAzAcCCL0vYJnEja6uMenvx3hZa1m68ZWFr0C25LQ5V87IEyZ3znvJQu
 IlcY9jMbYkX8dZz1M8LZA+nOtyYM5GxvgylaQvHRn8fi0jzYJWfJbAKdyvEX94qz
 UWtY35ihXFVBkhJuSxDPzluhMwxtd5uux1zO09/KlpUg8nnhxRx5l7AF7k7YyRk9
 TZ5dVa6kp8CdmBZK6E9FNHstfvECL64oc9Ig3CB/bRXYBm60hN9pLXO2abJKV7dU
 FUe4kmWUNus5QKOzfGuPKJokw34/vxBW2CVrOeRUNcuaRhlUwuboijeLPf23XLI/
 fYDI4EiMxAZvcEZ5h0KKDS0MaLv4uy0LbAdrWx8Eg7pNeFUiovDgovYUF7HOmn6M
 BzesklDaXWUSPWxlnASg
 =WJgu
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These make hibernation on 32-bit x86 systems work in all of the cases
  in which it works on 64-bit x86 ones, update the menu cpuidle governor
  and the "polling" state to make them more efficient, add more hardware
  support to cpufreq drivers and fix issues with some of them, fix a bug
  in the conservative cpufreq governor, fix the operating performance
  points (OPP) framework and make it more stable, update the devfreq
  subsystem to take changes in the APIs used by into account and clean
  up some things all over.

  Specifics:

   - Backport hibernation bug fixes from x86-64 to x86-32 and
     consolidate hibernation handling on x86 to allow 32-bit systems to
     work in all of the cases in which 64-bit ones work (Zhimin Gu, Chen
     Yu).

   - Fix hibernation documentation (Vladimir D. Seleznev).

   - Update the menu cpuidle governor to fix a couple of issues with it,
     make it more efficient in some cases and clean it up (Rafael
     Wysocki).

   - Rework the cpuidle polling state implementation to make it more
     efficient (Rafael Wysocki).

   - Clean up the cpuidle core somewhat (Fieah Lim).

   - Fix the cpufreq conservative governor to take policy limits into
     account properly in some cases (Rafael Wysocki).

   - Add support for retrieving guaranteed performance information to
     the ACPI CPPC library and make the intel_pstate driver use it to
     expose the CPU base frequency via sysfs on systems with the
     hardware-managed P-states (HWP) feature enabled (Srinivas
     Pandruvada).

   - Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor).

   - Get rid of device_node.name printing from cpufreq (Rob Herring).

   - Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa).

   - Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju
     Das).

   - Update the dt-platdev cpufreq driver to allow RK3399 to have
     separate tunables per cluster (Dmitry Torokhov).

   - Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver
     (Christoph Hellwig).

   - Make the imx6q cpufreq driver read OCOTP through nvmem for
     imx6ul/imx6ull (Anson Huang).

   - Fix several bugs in the operating performance points (OPP)
     framework and make it more stable (Viresh Kumar, Dave Gerlach).

   - Update the devfreq subsystem to take changes in the APIs used by
     into account, fix some issues with it and make it stop print
     device_node.name directly (Bjorn Andersson, Enric Balletbo i Serra,
     Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong jiang).

   - Prepare the generic power domains (genpd) framework for dealing
     with domains containing CPUs (Ulf Hansson).

   - Prevent sysfs attributes representing low-power S0 residency
     counters from being exposed if low-power S0 support is not
     indicated in ACPI FADT (Rajneesh Bhardwaj).

   - Get rid of custom CPU features macros for Intel CPUs from the
     intel_idle and RAPL drivers (Andy Shevchenko).

   - Update the tasks freezer to list tasks that refused to freeze and
     caused a system transition to a sleep state to be aborted (Todd
     Brandt).

   - Update the pm-graph set of tools to v5.2 (Todd Brandt).

   - Fix some issues in the cpupower utility (Anders Roxell, Prarit
     Bhargava)"

* tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
  PM / Domains: Document flags for genpd
  PM / Domains: Deal with multiple states but no governor in genpd
  PM / Domains: Don't treat zero found compatible idle states as an error
  cpuidle: menu: Avoid computations when result will be discarded
  cpuidle: menu: Drop redundant comparison
  cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent()
  cpufreq: conservative: Take limits changes into account properly
  Documentation: intel_pstate: Add base_frequency information
  cpufreq: intel_pstate: Add base_frequency attribute
  ACPI / CPPC: Add support for guaranteed performance
  cpuidle: menu: Simplify checks related to the polling state
  PM / tools: sleepgraph and bootgraph: upgrade to v5.2
  PM / tools: sleepgraph: first batch of v5.2 changes
  cpupower: Fix coredump on VMWare
  cpupower: Fix AMD Family 0x17 msr_pstate size
  cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull
  cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster
  cpuidle: poll_state: Revise loop termination condition
  cpuidle: menu: Move the latency_req == 0 special case check
  cpuidle: menu: Avoid computations for very close timers
  ...
2018-10-23 10:28:21 +01:00
Linus Torvalds 6214a9fe2a regmap: Updates for v5.0
A small update with a couple of new APIs that are useful for some small
 sets of devices:
 
  - Split up the single_rw flagging to map read and write separately as
    some devices support bulk operations for only read or only write.
  - Add a write version of the noinc API.
  - Clean up the code for LOG_DEVICE a bit.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNvQgTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MAPB/9Ftz3U5DpfLoN/KEOQlGv6LeoryRcI
 kSRXm7zlZmIrMm4xQtR59oXDSh05uPaZnbXPcIajfQhq895Y6T1+idHbd9pBmDFq
 cZ+YeORg+5NSThnbJeNBa1hiMFvM8seCP2eeHEu6ZX+jWE7AmfFsW6re3e9uXg+m
 DQ9tCFMnByShHFfEhWkvQiZAfPHLgN7MK6FvxAjYoUq/GeGjhCyOz1S0vNZXc4pj
 P6hJHngr+6axZYQ+IXcwoGj1UdS3aZWvamL5eCV/plFYaf9uNYgnyaGxhY7/hddB
 Ty3GHJOhGWZq8fjIR/ejS6M2g0c36tWq38uGHGAenyJsta1Kub/fcdzQ
 =WHhl
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "A small update with a couple of new APIs that are useful for some
  small sets of devices:

   - Split up the single_rw flagging to map read and write separately as
     some devices support bulk operations for only read or only write.

   - Add a write version of the noinc API.

   - Clean up the code for LOG_DEVICE a bit"

* tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: use less #ifdef for LOG_DEVICE
  regmap: Add regmap_noinc_write API
  regmap: split up regmap_config.use_single_rw
  regmap: fix comment for regmap.use_single_write
2018-10-23 01:17:27 +01:00
Linus Torvalds cff229491a First batch of dma-mapping changes for 4.20:
- mostly more consolidation of the direct mapping code, including
    converting over hexagon, and merging the coherent and non-coherent
    code into a single dma_map_ops instance (me)
  - cleanups for the dma_configure/dma_unconfigure callchains (me)
  - better handling of dma_masks in odd setups (me, Alexander Duyck)
  - better debugging of passing vmalloc address to the DMA API
    (Stephen Boyd)
  - CMA command line parsing fix (He Zhe)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlvNg6YLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMm/Q/9FFVOH73Nc3rT40N2HdaPbzV2hXmI1//hEJcImDP5
 mLGq8XqieGuo8Pmu9+xp1tC2UnfUkhK4FjhQbWM+qKER/RNYES2BD50xVFmt6ICS
 9d8IaRcs+ceggljfdwszkkucJspBsYNxpiKjjao0OsHn6UDatu6elZs/yvb2nXci
 HCJUvs9vYm9MkAtVXEtOQtij3YRaJ/9xYY4h5Dy5vBtHPp+kjUMF0mWAwA2+Ec1V
 8iqKjUY3c8nr8Kf6WE9tzJ0wrMFijc4HJlE3W1ud8YsKdfCkCf8XiIuS6PgTzOeK
 0cn9h8dVrV1ZXJ/D/9JZDivmYvIsoKWAYVQHNzAiq7PI3uOJY1ggCxyZpWtTHZhM
 ATHF0sJGpIenkSWybYpKee8e8RsS7L9dUgu6bYpK5pVkirNYnR9IOGVJNmS63L7Q
 B0uUtqjBKDG2yNGZGY9zqBQFgxiPO0wxFLeKyHbIsC0b7FBti3rXGAimch5WiBuL
 zlDV0zEfMH0BW6gNPrjfFur84duKtGZ/0DBSxQ0E1Mvk8B1LBr78MgZt8OfJEuoe
 dx1FYU70u8PYi+hjmn386YnNNMTjd1GT5XW7AWedM2wCjRYmNy0yMGmm9cACMneN
 5eBv/SYr7X1zKNL7w7H6KQVZilTJcBoj3f/lmjL7i22m9FXYQpcUP61L8wHNM8H2
 iJo=
 =AVSD
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping

Pull dma mapping updates from Christoph Hellwig:
 "First batch of dma-mapping changes for 4.20.

  There will be a second PR as some big changes were only applied just
  before the end of the merge window, and I want to give them a few more
  days in linux-next.

  Summary:

   - mostly more consolidation of the direct mapping code, including
     converting over hexagon, and merging the coherent and non-coherent
     code into a single dma_map_ops instance (me)

   - cleanups for the dma_configure/dma_unconfigure callchains (me)

   - better handling of dma_masks in odd setups (me, Alexander Duyck)

   - better debugging of passing vmalloc address to the DMA API (Stephen
     Boyd)

   - CMA command line parsing fix (He Zhe)"

* tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping: (27 commits)
  dma-direct: respect DMA_ATTR_NO_WARN
  dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN
  dma-direct: document the zone selection logic
  dma-debug: Check for drivers mapping invalid addresses in dma_map_single()
  dma-direct: fix return value of dma_direct_supported
  dma-mapping: move dma_default_get_required_mask under ifdef
  dma-direct: always allow dma mask <= physiscal memory size
  dma-direct: implement complete bus_dma_mask handling
  dma-direct: refine dma_direct_alloc zone selection
  dma-direct: add an explicit dma_direct_get_required_mask
  dma-mapping: make the get_required_mask method available unconditionally
  unicore32: remove swiotlb support
  Revert "dma-mapping: clear dev->dma_ops in arch_teardown_dma_ops"
  dma-mapping: support non-coherent devices in dma_common_get_sgtable
  dma-mapping: consolidate the dma mmap implementations
  dma-mapping: merge direct and noncoherent ops
  dma-mapping: move the dma_coherent flag to struct device
  MIPS: don't select DMA_MAYBE_COHERENT from DMA_PERDEV_COHERENT
  dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration
  dma-mapping: fix panic caused by passing empty cma command line argument
  ...
2018-10-22 18:16:03 +01:00
Mark Brown ae2399c48c
Merge remote-tracking branches 'regmap/topic/noinc' and 'regmap/topic/single-rw' into regmap-next 2018-10-21 12:07:26 +01:00
Mark Brown 9ef6884105
Merge branch 'regmap-4.20' into regmap-next 2018-10-21 12:07:24 +01:00
Ben Dooks 9509376240
regmap: use less #ifdef for LOG_DEVICE
Move the checking of the LOG_DEVICE into a function to reduce the
number of #ifdefs and  ensure more of the code gets compiled/checked,
and make it easier to change this for internal debugging purposes
(such as checking >1 device).

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-19 13:22:16 +01:00
Ben Whitten cdf6b11daa
regmap: Add regmap_noinc_write API
The regmap API had a noinc_read function added for instances where devices
supported returning data from an internal FIFO in a single read.

This commit adds the noinc_write variant to allow writing to a non
incrementing register, this is used in devices such as the sx1301 for
loading firmware.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-19 12:51:19 +01:00
Rafael J. Wysocki bd371e088b Merge branches 'acpi-init', 'acpi-osl', 'acpi-bus', 'acpi-tables' and 'acpi-misc'
* acpi-init:
  ACPI: probe ECDT before loading AML tables regardless of module-level code flag

* acpi-osl:
  ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer()

* acpi-bus:
  ACPI / glue: Split dev_is_platform() out of module for wide use

* acpi-tables:
  ACPI/PPTT: Handle architecturally unknown cache types
  drivers: base: cacheinfo: Do not populate sysfs for unknown cache types

* acpi-misc:
  ACPI: remove redundant 'default n' from Kconfig
  ACPI: custom_method: remove meaningless null check before debugfs_remove()
2018-10-18 12:37:11 +02:00
Ulf Hansson 2c9b7f8772 PM / Domains: Deal with multiple states but no governor in genpd
A caller of pm_genpd_init() that provides some states for the genpd via the
->states pointer in the struct generic_pm_domain, should also provide a
governor. This because it's the job of the governor to pick a state that
satisfies the constraints.

Therefore, let's print a warning to inform the user about such bogus
configuration and avoid to bail out, by instead picking the shallowest
state before genpd invokes the ->power_off() callback.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18 12:25:09 +02:00
Ulf Hansson 2c36168480 PM / Domains: Don't treat zero found compatible idle states as an error
Instead of returning -EINVAL from of_genpd_parse_idle_states() in case none
compatible states was found, let's return 0 to indicate success. Assign
also the out-parameter *states to NULL and *n to 0, to indicate to the
caller that zero states have been found/allocated.

This enables the caller of of_genpd_parse_idle_states() to easier act on
the returned error code.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18 12:25:09 +02:00
Bartosz Golaszewski 09d1ea1c73 devres: provide devm_kstrdup_const()
Provide a resource managed version of kstrdup_const(). This variant
internally calls devm_kstrdup() on pointers that are outside of
.rodata section and returns the string as is otherwise.

Make devm_kfree() check if the passed pointer doesn't point to .rodata
and if so - don't actually destroy the resource.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16 12:53:27 +02:00
Bartosz Golaszewski 0571967dfb devres: constify p in devm_kfree()
Make devm_kfree() signature uniform with that of kfree(). To avoid
compiler warnings: cast p to (void *) when calling devres_destroy().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16 12:53:27 +02:00
Greg Kroah-Hartman fb1c592cf4 Char/Misc fixes for 4.19-rc7
Here are 8 small fixes for some char/misc driver issues
 
 Included here are:
 	- fpga driver fixes
 	- thunderbolt bugfixes
 	- firmware core revert/fix
 	- hv core fix
 	- hv tool fix
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW7mgvw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yltNwCgp0XpcCTEoBCiBInhPHYpR4xnclYAoId6nfC5
 89LJS04eEQzbiQJpigLt
 =U6rt
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

I wrote:
  "Char/Misc fixes for 4.19-rc7

   Here are 8 small fixes for some char/misc driver issues

   Included here are:
	- fpga driver fixes
	- thunderbolt bugfixes
	- firmware core revert/fix
	- hv core fix
	- hv tool fix

   All of these have been in linux-next with no reported issues."

* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Initialize after IOMMUs
  thunderbolt: Do not handle ICM events after domain is stopped
  firmware: Always initialize the fw_priv list object
  docs: fpga: document fpga manager flags
  fpga: bridge: fix obvious function documentation error
  tools: hv: fcopy: set 'error' in case an unknown operation was requested
  fpga: do not access region struct after fpga_region_unregister
  Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
2018-10-07 08:15:57 +02:00
Thomas Gleixner a223464217 Merge tag 'irqchip-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:

 - kexec/kdump support for EFI-based GICv3 platforms
 - Marvell SEI support
 - QC PDC fixes
 - GIC cleanups and optimizations
 - DT updates

[ tglx: Dropped the madera driver as it breaks the build ]
2018-10-06 15:45:07 +02:00
Jeffrey Hugo ca388e436f drivers: base: cacheinfo: Do not populate sysfs for unknown cache types
If a cache has an unknown type because neither the hardware nor the
firmware told us, an entry in the sysfs tree will be made, but the type
file will not be present.  lscpu depends on the type file being present
for every entry, and will error out without printing system information
if lscpu cannot open the type file.

Presenting information about a cache without indicating its type is not
useful, therefore if we hit a cache with an unknown type, stop populating
sysfs so that userspace has the maximum amount of useful information.

This addresses the following lscpu error, which prevents any output.
lscpu: cannot open /sys/devices/system/cpu/cpu0/cache/index3/type: No such
file or directory

Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04 23:02:17 +02:00
Rafael J. Wysocki 69e445ab8b PM / core: Clear the direct_complete flag on errors
If __device_suspend() runs asynchronously (in which case the device
passed to it is in dpm_suspended_list at that point) and it returns
early on an error or pending wakeup, and the power.direct_complete
flag has been set for the device already, the subsequent
device_resume() will be confused by that and it will call
pm_runtime_enable() incorrectly, as runtime PM has not been
disabled for the device by __device_suspend().

To avoid that, clear power.direct_complete if __device_suspend()
is not going to disable runtime PM for the device before returning.

Fixes: aae4518b31 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily)
Reported-by: Al Cooper <alcooperx@gmail.com>
Tested-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04 19:39:31 +02:00
Christoph Hellwig 6db37ad7c2 dma-mapping: move dma_default_get_required_mask under ifdef
This avoids a warning on powerpc.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2018-10-02 07:21:31 -07:00
Marc Zyngier 1f83515beb genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
platform_msi_create_device_domain() always creates a revmap-based
irqdomain, which has the drawback of requiring the number of MSIs
that can be allocated ahead of time. This is not always possible,
and we sometimes need to use a tree-based irqdomain instead.

Add a new platform_msi_create_device_tree_domain() helper to
that effect.

Reported-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-02 11:16:38 +01:00
Ingo Molnar b429f71bca Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-02 09:43:39 +02:00
Christoph Hellwig c6d4381220 dma-mapping: make the get_required_mask method available unconditionally
This save some duplication for ia64, and makes the interface more
general.  In the long run we want each dma_map_ops instance to fill this
out, but this will take a little more prep work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-10-01 07:27:00 -07:00
Bjorn Andersson 7012040576 firmware: Always initialize the fw_priv list object
When freeing the fw_priv the item is taken off the list. This causes an
oops in the FW_OPT_NOCACHE case as the list object is not initialized.

Make sure to initialize the list object regardless of this flag.

Fixes: 422b3db2a5 ("firmware: Fix security issue with request_firmware_into_buf()")
Cc: stable@vger.kernel.org
Cc: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-30 08:49:55 -07:00
Banajit Goswami bdae566d5d component: fix loop condition to call unbind() if bind() fails
During component_bind_all(), if bind() fails for any
particular component associated with a master, unbind()
should be called for all previous components in that
master's match array, whose bind() might have completed
successfully. As per the current logic, if bind() fails
for the component at position 'n' in the master's match
array, it would start calling unbind() from component in
'n'th position itself and work backwards, and will always
skip calling unbind() for component in 0th position in the
master's match array.
Fix this by updating the loop condition, and the logic to
refer to the components in master's match array, so that
unbind() is called for all components starting from 'n-1'st
position in the array, until (and including) component in
0th position.

Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16 22:37:16 +02:00
Rasmus Villemoes be6b1dfe95 drivers/base/devtmpfs.c: don't pretend path is const in delete_path
path is the result of kstrdup, and we repeatedly call strrchr on it,
modifying it through the returned pointer. So there's no reason to
pretend path is const.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16 22:37:16 +02:00
Rishabh Bhatnagar 422b3db2a5 firmware: Fix security issue with request_firmware_into_buf()
When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag
it is expected that firmware is loaded into buffer from memory.
But inside alloc_lookup_fw_priv every new firmware that is loaded is
added to the firmware cache (fwc) list head. So if any driver requests
a firmware that is already loaded the code iterates over the above
mentioned list and it can end up giving a pointer to other device driver's
firmware buffer.
Also the existing copy may either be modified by drivers, remote processors
or even freed. This causes a potential security issue with batched requests
when using request_firmware_into_buf.

Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE
is set, and also don't do the lookup in the list.

Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional")
[mcgrof: broken since feature introduction on v4.8]

Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12 09:31:00 +02:00
Morten Rasmussen bb1fbdd3c3 sched/topology, drivers/base/arch_topology: Rebuild the sched_domain hierarchy when capacities change
The setting of SD_ASYM_CPUCAPACITY depends on the per-CPU capacities.
These might not have their final values when the hierarchy is initially
built as the values depend on cpufreq to be initialized or the values
being set through sysfs. To ensure that the flags are set correctly we
need to rebuild the sched_domain hierarchy whenever the reported per-CPU
capacity (arch_scale_cpu_capacity()) changes.

This patch ensure that a full sched_domain rebuild happens when CPU
capacity changes occur.

Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1532093554-30504-3-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-10 11:05:47 +02:00
Christoph Hellwig dc3c05504d dma-mapping: remove dma_deconfigure
This goes through a lot of hooks just to call arch_teardown_dma_ops.
Replace it with a direct call instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-08 11:19:28 +02:00
Christoph Hellwig ccf640f4c9 dma-mapping: remove dma_configure
There is no good reason for this indirection given that the method
always exists.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-08 11:19:20 +02:00
David Frey 1c96a2f67c
regmap: split up regmap_config.use_single_rw
Split regmap_config.use_single_rw into use_single_read and
use_single_write. This change enables drivers of devices which only
support bulk operations in one direction to use the regmap_bulk_*()
functions for both directions and have their bulk operation split into
single operations only when necessary.

Update all struct regmap_config instances where use_single_rw==true to
instead set both use_single_read and use_single_write. No attempt was
made to evaluate whether it is possible to set only one of
use_single_read or use_single_write.

Signed-off-by: David Frey <dpfrey@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-07 13:03:55 +01:00
David Frey 9ad8eb0168
regmap: fix comment for regmap.use_single_write
Signed-off-by: David Frey <dpfrey@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-07 13:03:51 +01:00
Mikhail Zaslonko 4e8346d0be memory_hotplug: fix kernel_panic on offline page processing
Within show_valid_zones() the function test_pages_in_a_zone() should be
called for online memory blocks only.

Otherwise it might lead to the VM_BUG_ON due to uninitialized struct
pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set):

 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 ------------[ cut here ]------------
 Call Trace:
 ([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168)
  [<0000000000923472>] show_valid_zones+0x5a/0x1a8
  [<0000000000900284>] dev_attr_show+0x3c/0x78
  [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150
  [<00000000003ef662>] seq_read+0x212/0x4b8
  [<00000000003bf202>] __vfs_read+0x3a/0x178
  [<00000000003bf3ca>] vfs_read+0x8a/0x148
  [<00000000003bfa3a>] ksys_read+0x62/0xb8
  [<0000000000bc2220>] system_call+0xdc/0x2d8

That VM_BUG_ON was triggered by the page poisoning introduced in
mm/sparse.c with the git commit d0dc12e86b ("mm/memory_hotplug:
optimize memory hotplug").

With the same commit the new 'nid' field has been added to the struct
memory_block in order to store and later on derive the node id for
offline pages (instead of accessing struct page which might be
uninitialized).  But one reference to nid in show_valid_zones() function
has been overlooked.  Fixed with current commit.  Also, nr_pages will
not be used any more after test_pages_in_a_zone() call, do not update
it.

Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com
Fixes: d0dc12e86b ("mm/memory_hotplug: optimize memory hotplug")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: <stable@vger.kernel.org>	[4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-04 16:45:02 -07:00
Dan Carpenter 5e2e2f9f76 PM / clk: signedness bug in of_pm_clk_add_clks()
"count" needs to be signed for the error handling to work.  I made "i"
signed as well so they match.

Fixes: 02113ba93e (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-24 11:52:34 +02:00
Linus Torvalds a18d783fed Driver core patches for 4.19-rc1
Here are all of the driver core and related patches for 4.19-rc1.
 
 Nothing huge here, just a number of small cleanups and the ability to
 now stop the deferred probing after init happens.
 
 All of these have been in linux-next for a while with only a merge issue
 reported.  That merge issue is in fs/sysfs/group.c and Stephen has
 posted the diff of what it should be to resolve this.  I'll follow up
 with that diff to this pull request.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g86Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynyXQCePaZSW8wft4b7nLN8RdZ98ATBru0Ani10lrJa
 HQeQJRNbWU1AZ0ym7695
 =tOaH
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are all of the driver core and related patches for 4.19-rc1.

  Nothing huge here, just a number of small cleanups and the ability to
  now stop the deferred probing after init happens.

  All of these have been in linux-next for a while with only a merge
  issue reported"

* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  base: core: Remove WARN_ON from link dependencies check
  drivers/base: stop new probing during shutdown
  drivers: core: Remove glue dirs from sysfs earlier
  driver core: remove unnecessary function extern declare
  sysfs.h: fix non-kernel-doc comment
  PM / Domains: Stop deferring probe at the end of initcall
  iommu: Remove IOMMU_OF_DECLARE
  iommu: Stop deferring probe at end of initcalls
  pinctrl: Support stopping deferred probe after initcalls
  dt-bindings: pinctrl: add a 'pinctrl-use-default' property
  driver core: allow stopping deferred probe after init
  driver core: add a debugfs entry to show deferred devices
  sysfs: Fix internal_create_group() for named group updates
  base: fix order of OF initialization
  linux/device.h: fix kernel-doc notation warning
  Documentation: update firmware loader fallback reference
  kobject: Replace strncpy with memcpy
  drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
  kernfs: Replace strncpy with memcpy
  device: Add #define dev_fmt similar to #define pr_fmt
  ...
2018-08-18 11:44:53 -07:00
Luis R. Rodriguez a3266bd49c mm: provide a fallback for PAGE_KERNEL_RO for architectures
Some architectures do not define certain PAGE_KERNEL_* flags, this is
either because:

 a) The way to implement some of these flags is *not yet ported*, or
 b) The architecture *has no way* to describe them

Over time we have accumulated a few PAGE_KERNEL_* fallback workarounds
for architectures in the kernel which do not define them using
*relatively safe* equivalents.  Move these scattered fallback hacks into
asm-generic.

We start off with PAGE_KERNEL_RO using PAGE_KERNEL as a fallback.  This
has been in place on the firmware loader for years.  Move the fallback
into the respective asm-generic header.

Link: http://lkml.kernel.org/r/20180510185507.2439-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:29 -07:00
Oscar Salvador 3172e5e61c mm/memory_hotplug.c: drop unnecessary checks from register_mem_sect_under_node()
Callers of register_mem_sect_under_node() are always passing a valid
memory_block (not NULL), so we can safely drop the check for NULL.

In the same way, register_mem_sect_under_node() is only called in case
the node is online, so we can safely remove that check as well.

Link: http://lkml.kernel.org/r/20180622111839.10071-5-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:29 -07:00
Oscar Salvador 4fbce63391 mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()
link_mem_sections() and walk_memory_range() share most of the code, so
we can use convert link_mem_sections() into a dummy function that calls
walk_memory_range() with a callback to register_mem_sect_under_node().

This patch converts register_mem_sect_under_node() in order to match a
walk_memory_range's callback, getting rid of the check_nid argument and
checking instead if the system is still boothing, since we only have to
check for the nid if the system is in such state.

Link: http://lkml.kernel.org/r/20180622111839.10071-4-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:29 -07:00
Oscar Salvador d5b6f6a361 mm/memory_hotplug.c: call register_mem_sect_under_node()
When hotplugging memory, it is possible that two calls are being made to
register_mem_sect_under_node().

One comes from __add_section()->hotplug_memory_register() and the other
from add_memory_resource()->link_mem_sections() if we had to register a
new node.

In case we had to register a new node, hotplug_memory_register() will
only handle/allocate the memory_block's since
register_mem_sect_under_node() will return right away because the node
it is not online yet.

I think it is better if we leave hotplug_memory_register() to
handle/allocate only memory_block's and make link_mem_sections() to call
register_mem_sect_under_node().

So this patch removes the call to register_mem_sect_under_node() from
hotplug_memory_register(), and moves the call to link_mem_sections() out
of the condition, so it will always be called.  In this way we only have
one place where the memory sections are registered.

Link: http://lkml.kernel.org/r/20180622111839.10071-3-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:29 -07:00
Linus Torvalds 9a76aba02a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...
2018-08-15 15:04:25 -07:00
Linus Torvalds 92d4a03674 Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - kstrdup() return value fix from Eric Biggers

 - Add new security_load_data hook to differentiate security checking of
   kernel-loaded binaries in the case of there being no associated file
   descriptor, from Mimi Zohar.

 - Add ability to IMA to specify a policy at build-time, rather than
   just via command line params or by loading a custom policy, from
   Mimi.

 - Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
   using signed firmware), from Mimi.

 - Allow IMA to deny loading of kexec kernel images, as they cannot be
   measured by IMA, from Mimi.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: check for kstrdup() failure in lsm_append()
  security: export security_kernel_load_data function
  ima: based on policy warn about loading firmware (pre-allocated buffer)
  module: replace the existing LSM hook in init_module
  ima: add build time policy
  ima: based on policy require signed firmware (sysfs fallback)
  firmware: add call to LSM hook before firmware sysfs fallback
  ima: based on policy require signed kexec kernel images
  kexec: add call to LSM hook in original kexec_load syscall
  security: define new LSM hook named security_kernel_load_data
  MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
2018-08-15 10:25:26 -07:00
Linus Torvalds b018fc9800 Power management updates for 4.19-rc1
- Add a new framework for CPU idle time injection (Daniel Lezcano).
 
  - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT).
 
  - Add support for current CPU frequency reporting to the ACPI CPPC
    cpufreq driver (George Cherian).
 
  - Rework the cooling device registration in the imx6q/thermal
    driver (Bastian Stender).
 
  - Make the pcc-cpufreq driver refuse to work with dynamic
    scaling governors on systems with many CPUs to avoid
    scalability issues with it (Rafael Wysocki).
 
  - Fix the intel_pstate driver to report different maximum CPU
    frequencies on systems where they really are different and to
    ignore the turbo active ratio if hardware-managend P-states (HWP)
    are in use; make it use the match_string() helper (Xie Yisheng,
    Srinivas Pandruvada).
 
  - Fix a minor deferred probe issue in the qcom-kryo cpufreq
    driver (Niklas Cassel).
 
  - Add a tracepoint for the tracking of frequency limits changes
    (from Andriod) to the cpufreq core (Ruchi Kandoi).
 
  - Fix a circular lock dependency between CPU hotplug and sysfs
    locking in the cpufreq core reported by lockdep (Waiman Long).
 
  - Avoid excessive error reports on driver registration failures
    in the ARM cpuidle driver (Sudeep Holla).
 
  - Add a new device links flag to the driver core to make links go
    away automatically on supplier driver removal (Vivek Gautam).
 
  - Eliminate potential race condition between system-wide power
    management transitions and system shutdown (Pingfan Liu).
 
  - Add a quirk to save NVS memory on system suspend for the ASUS
    1025C laptop (Willy Tarreau).
 
  - Make more systems use suspend-to-idle (instead of ACPI S3) by
    default (Tristian Celestin).
 
  - Get rid of stack VLA usage in the low-level hibernation code on
    64-bit x86 (Kees Cook).
 
  - Fix error handling in the hibernation core and mark an expected
    fall-through switch in it (Chengguang Xu, Gustavo Silva).
 
  - Extend the generic power domains (genpd) framework to support
    attaching a device to a power domain by name (Ulf Hansson).
 
  - Fix device reference counting and user limits initialization in
    the devfreq core (Arvind Yadav, Matthias Kaehlcke).
 
  - Fix a few issues in the rk3399_dmc devfreq driver and improve its
    documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
 
  - Drop a redundant error message from the exynos-ppmu devfreq driver
    (Markus Elfring).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbcqOqAAoJEILEb/54YlRxOxMP/2ZFvnXU0pey/VX/+TelLMS7
 /ROVGQ+s75QP1c9P/3BjvnXc0dsMRLRFPog+7wyoG/2DbEIV25COyAYsmSE0TRni
 XUaZO6YAx4/e3pm2AfamYbLCPvjw85eucHg5QJQ4b1mSVRNJOsNv+fUo6lmxwvnm
 j9kHvfttFeIhoa/3wa7hbhPKLln46atnpVSxCIceY7L5EFNhkKBvQt6B5yx9geb9
 QMY6ohgkyN+bnK9QySXX+trcWpzx1uGX0apI07NkX7n9QGFdU4lCW8lsAf8jMC3g
 PPValTsUQsdRONUJJsrgqBioq4tvtgQWibyS2tfRrOGXYvHpJNpGmHVplfsrf/SE
 cvlsciR47YbmrXZuqg/r8hql+qefNN16/rnZIZ9VnbcG806VBy2z8IzI5wcdWR7p
 vzxhbCqVqOHcEdEwRwvuM2io67MWvkGtKsbCP+33DBh8SubpsECpKN4nIDboa3SE
 CJ15RUqXnF6enmmfCKOoHZeu7iXWDz6Pi71XmRzaj9DqbITVV281IerqLgV3rbal
 BVa53+202iD0IP+2b7KedGe/5ALlI97ffN0gB+L/eB832853DKSZQKzcvvpRhEN7
 Iv2crnUwuQED9ns8P7hzp1Bk9CFCAOLW8UM43YwZRPWnmdeSsPJusJ5lzkAf7bss
 wfsFoUE3RaY4msnuHyCh
 =kv2M
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add a new framework for CPU idle time injection, to be used by
  all of the idle injection code in the kernel in the future, fix some
  issues and add a number of relatively small extensions in multiple
  places.

  Specifics:

   - Add a new framework for CPU idle time injection (Daniel Lezcano).

   - Add AVS support to the armada-37xx cpufreq driver (Gregory
     CLEMENT).

   - Add support for current CPU frequency reporting to the ACPI CPPC
     cpufreq driver (George Cherian).

   - Rework the cooling device registration in the imx6q/thermal driver
     (Bastian Stender).

   - Make the pcc-cpufreq driver refuse to work with dynamic scaling
     governors on systems with many CPUs to avoid scalability issues
     with it (Rafael Wysocki).

   - Fix the intel_pstate driver to report different maximum CPU
     frequencies on systems where they really are different and to
     ignore the turbo active ratio if hardware-managend P-states (HWP)
     are in use; make it use the match_string() helper (Xie Yisheng,
     Srinivas Pandruvada).

   - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
     (Niklas Cassel).

   - Add a tracepoint for the tracking of frequency limits changes (from
     Andriod) to the cpufreq core (Ruchi Kandoi).

   - Fix a circular lock dependency between CPU hotplug and sysfs
     locking in the cpufreq core reported by lockdep (Waiman Long).

   - Avoid excessive error reports on driver registration failures in
     the ARM cpuidle driver (Sudeep Holla).

   - Add a new device links flag to the driver core to make links go
     away automatically on supplier driver removal (Vivek Gautam).

   - Eliminate potential race condition between system-wide power
     management transitions and system shutdown (Pingfan Liu).

   - Add a quirk to save NVS memory on system suspend for the ASUS 1025C
     laptop (Willy Tarreau).

   - Make more systems use suspend-to-idle (instead of ACPI S3) by
     default (Tristian Celestin).

   - Get rid of stack VLA usage in the low-level hibernation code on
     64-bit x86 (Kees Cook).

   - Fix error handling in the hibernation core and mark an expected
     fall-through switch in it (Chengguang Xu, Gustavo Silva).

   - Extend the generic power domains (genpd) framework to support
     attaching a device to a power domain by name (Ulf Hansson).

   - Fix device reference counting and user limits initialization in the
     devfreq core (Arvind Yadav, Matthias Kaehlcke).

   - Fix a few issues in the rk3399_dmc devfreq driver and improve its
     documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).

   - Drop a redundant error message from the exynos-ppmu devfreq driver
     (Markus Elfring)"

* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  PM / reboot: Eliminate race between reboot and suspend
  PM / hibernate: Mark expected switch fall-through
  cpufreq: intel_pstate: Ignore turbo active ratio in HWP
  cpufreq: Fix a circular lock dependency problem
  cpu/hotplug: Add a cpus_read_trylock() function
  x86/power/hibernate_64: Remove VLA usage
  cpufreq: trace frequency limits change
  cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
  cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
  cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
  cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
  cpufreq: armada-37xx: Add AVS support
  dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
  PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
  PM / devfreq: Init user limits from OPP limits, not viceversa
  PM / devfreq: rk3399_dmc: fix spelling mistakes.
  PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
  dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
  PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
  dt-bindings: clock: add rk3399 DDR3 standard speed bins.
  ...
2018-08-14 13:12:24 -07:00
Linus Torvalds 3860cae64c regulator: Changes for v4.19
The biggest set of changes in here is the addition of the Qualcomm RPMH
 driver.  As well as the regualtor driver itself being quite large due to
 the usual involved Qualcomm regulator stuff there's also some code
 shared with the arm-soc tree, a bus driver required to communicate with
 the hardware that actually winds up being much larger than the regulator
 driver itself and a LLCC driver that was part of the same signed tag
 used with the arm-soc tree.
 
 Other than that it's a fairly standard and quiet release, highlights
 include:
 
  - Addition of device links from regulator consumers to their
    regulators, helping the core avoid dependency issues during suspend.
  - Support for the entertainingly innovative suspend implementation in
    the BD9571MWV.
  - Support for switch regulators on the PFUZE100, this required two goes
    due to backwards compatibility issues with old DTs that were
    discovered.
  - Support for Freescale PFUZE3001 and SocioNext UniPhier.
  - The aforementioned Qualcomm RPMH driver together with the driver
    changes required to support it.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltxi/ATHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0GNxB/99LLeB+gfD4ckoU07Az/k77+CfIZ8D
 HEUA9ryP4y6isUxpZMGcZhKa48ag9RxTuAGK+gGWtKUHxPIH6o0CuRLbGm3GOo99
 MTbbMaJRJIHkwsh8XjX2Adr02XSzU/9r2T3rpZD10T/J1Qj1D3W1YuvaE/fQuOII
 XW8QWhRuTWbVI/gSIEj+o2PcVK77yb9Nr+llNvS+BOlFAlnNo1tx3qCJ1bUiVEyD
 DhLkL0n0XfaOpbtZV5DIsVDiMsB+/TnXtqiijfvq0qi5SHh6jECpQYNWHBNyIkwj
 4N9NQ9xfC6bArAl9tWxXvJrVXUqFSRagHeB2xLD6piWcZ0DC4K0QfEW2
 =WiXl
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest set of changes in here is the addition of the Qualcomm
  RPMH driver. As well as the regualtor driver itself being quite large
  due to the usual involved Qualcomm regulator stuff there's also some
  code shared with the arm-soc tree, a bus driver required to
  communicate with the hardware that actually winds up being much larger
  than the regulator driver itself and a LLCC driver that was part of
  the same signed tag used with the arm-soc tree.

  Other than that it's a fairly standard and quiet release, highlights
  include:

   - Addition of device links from regulator consumers to their
     regulators, helping the core avoid dependency issues during
     suspend.

   - Support for the entertainingly innovative suspend implementation in
     the BD9571MWV.

   - Support for switch regulators on the PFUZE100, this required two
     goes due to backwards compatibility issues with old DTs that were
     discovered.

   - Support for Freescale PFUZE3001 and SocioNext UniPhier.

   - The aforementioned Qualcomm RPMH driver together with the driver
     changes required to support it"

* tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: add QCOM RPMh regulator driver
  regulator: dt-bindings: add QCOM RPMh regulator bindings
  regulator: samsung: Add SPDX license identifiers
  regulator: maxim: Add SPDX license identifiers
  regulator: bd71837: adobt MFD changes to regulator driver
  regulator: tps65217: Fix NULL pointer dereference on probe
  regulator: Add support for CPCAP regulators on Motorola Xoom devices.
  regulator: Add sw2_sw4 voltage table to cpcap regulator.
  regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static
  regulator: pfuze100: add support to en-/disable switch regulators
  regulator: pfuze100: add optional disable switch-regulators binding
  soc: qcom: rmtfs-mem: fix memleak in probe error paths
  soc: qcom: llc-slice: Add missing MODULE_LICENSE()
  drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
  drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
  firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
  drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
  drivers: qcom: rpmh-rsc: allow active requests from wake TCS
  drivers: qcom: rpmh: add support for batch RPMH request
  drivers: qcom: rpmh: allow requests to be sent asynchronously
  ...
2018-08-14 12:04:49 -07:00
Linus Torvalds 15bc88cd5f regmap: Changes for v4.19
Several small new features for regmap this time around:
 
  - Support for SCCB, an I2C variant used on some media cards.  This has
    also pulled in an I2C commit from Peter Rosin as a dependency.
  - Addition of an API for reading repeatedly from registers where the
    address doesn't automatically increment like some ADC outputs or GPIO
    status registers.
  - Support for bulk I/O on Slimbus.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltxUxYTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0B26B/9A/Q9P+92i0LZ2ecO3QltvPeIP46jR
 gnS3WEmgMk/yIWR9wusF3Ju4gfTZ4L5DEkl+5iooqlg54e3c8l3OdDIsRXXiLtIK
 +BOU9xW4u4sdmGjuXqkkGCWgz75r/Em07Z4y3pB5kl/KHGtQPOrrvS8/33ETjhKC
 tg/SC8bdJ6ZSC2J1lVYA+IolNfVt0rvjY3TdXwm0qel9SmQIqrL8xilj/JV8Hmhg
 6PSH9PIoIkSRgvqp1N0IOysVcDcwgjAEyg3eeH+L2S0y/YMPY88ndf7d8mpWdkzQ
 KGEUxgB+qWBHMjRKTgu4sqal1KZxCPghxO5kRn4UBaZsxFDdnXbtDcRQ
 =e1ml
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Several small new features for regmap this time around:

   - Support for SCCB, an I2C variant used on some media cards. This has
     also pulled in an I2C commit from Peter Rosin as a dependency.

   - Addition of an API for reading repeatedly from registers where the
     address doesn't automatically increment like some ADC outputs or
     GPIO status registers.

   - Support for bulk I/O on Slimbus"

* tag 'regmap-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Add regmap_noinc_read API
  regmap: sccb: fix typo and sort headers alphabetically
  i2c: smbus: add unlocked __i2c_smbus_xfer variant
  regmap: add SCCB support
  regmap: slimbus: add support to multi read/write
2018-08-14 11:51:03 -07:00
Rafael J. Wysocki 17bc3432e3 Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'
Merge changes in the PM core, system-wide PM infrastructure, generic
power domains (genpd) framework, ACPI PM infrastructure and cpuidle
for 4.19.

* pm-core:
  driver core: Add flag to autoremove device link on supplier unbind
  driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER

* pm-domains:
  PM / Domains: Introduce dev_pm_domain_attach_by_name()
  PM / Domains: Introduce option to attach a device by name to genpd
  PM / Domains: dt: Add a power-domain-names property

* pm-sleep:
  PM / reboot: Eliminate race between reboot and suspend
  PM / hibernate: Mark expected switch fall-through
  x86/power/hibernate_64: Remove VLA usage
  PM / hibernate: cast PAGE_SIZE to int when comparing with error code

* acpi-pm:
  ACPI / PM: save NVS memory for ASUS 1025C laptop
  ACPI / PM: Default to s2idle in all machines supporting LP S0

* pm-cpuidle:
  ARM: cpuidle: silence error on driver registration failure
2018-08-14 09:48:10 +02:00
Mark Brown d22d59362b
Merge branch 'regulator-4.19' into regulator-next 2018-08-10 17:31:24 +01:00
Mark Brown 1dce5d849f
Merge branch 'regmap-4.19' into regmap-next 2018-08-09 11:17:30 +01:00
Mark Brown 1cbddedbed regmap: Support non-incrementing registers
Some devices have individual registers that don't autoincrement the
 register address during bulk reads but instead repeatedly read the same
 value, for example for monitoring GPIOs or ADCs.  Add support for these.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltsE8YTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0DeLB/sHEWAdyUCz9dO9pDdpi6WfpnKXuCCd
 ZFnx8VXBvzVLRCZYGXuMOUEzBQU2lTr2KPFDmE1k4FclyiWaI+hRIJ0s/x8FAl51
 EFDoR4TM7t2n2aY0sPQCZKnoAhdQ9YPxlA9JjDUE57h0KoC76Dh8OB44dlAlxUAY
 PUjkv64/7AtvkBX7UZPQxckaPOLKM00P/hXwCB9MZCkjqnSWkUGgNCWPgKn9j2yL
 jiUQO0Wo9u8RkvYvndHPkh4NzgeH1sUFUdNys/Fopu6C2miIYBNKzvEo2OXhelHf
 k5rsoMQXYdiPdy4vRbeaWFetyEeBjxKIAQHKD0WJviFPw8j+ET+2GNjx
 =p0Mu
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltsFCwTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0NcxB/wMqH+78D7GdJfMkxMKhCHFUxozfCe9
 cgWgZ7+vlWpIwEGvM65FHMrFyc5ZrS3/vD6Hy8lqpsqGBVv6wS6Z0lsoOyj/QvTl
 T8USWKvQnvtzlPY5lRZL0xuGiaGGtpGa0eaLKH2lY7uvoge0oHz8VV6ar5y7eA1S
 1INBpgTdHJgCQLZoc1pFNOcZ0EMFl6ZAygIWJTpqIwoQlvPEgtCQ4wjPlMUKrevP
 psJWd9obyM6+02mYFVMAlYpcMSoZ/MjPeMb7VGhLGwA1BA6dNcbiIeS7GCeH2r/i
 /vxvarsEm38MfLBIyORW06onHyRhVwXdLoD1jblmvYtRlfW5ANjr5g/O
 =mbi1
 -----END PGP SIGNATURE-----

Merge tag 'regmap-noinc-read' into regmap-4.19

regmap: Support non-incrementing registers

Some devices have individual registers that don't autoincrement the
register address during bulk reads but instead repeatedly read the same
value, for example for monitoring GPIOs or ADCs.  Add support for these.
2018-08-09 11:15:06 +01:00
Crestez Dan Leonard 74fe7b551f
regmap: Add regmap_noinc_read API
The regmap API usually assumes that bulk read operations will read a
range of registers but some I2C/SPI devices have certain registers for
which a such a read operation will return data from an internal FIFO
instead. Add an explicit API to support bulk read without range semantics.

Some linux drivers use regmap_bulk_read or regmap_raw_read for such
registers, for example mpu6050 or bmi150 from IIO. This only happens to
work because when caching is disabled a single regmap read op will map
to a single bus read op (as desired). This breaks if caching is enabled and
reg+1 happens to be a cacheable register.

Without regmap support refactoring a driver to enable regmap caching
requires separate I2C and SPI paths. This is exactly what regmap is
supposed to help avoid.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-09 11:00:15 +01:00
Thomas Gleixner f2701b77bb Merge 4.18-rc7 into master to pick up the KVM dependcy
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-08-05 16:39:29 +02:00
David S. Miller 89b1698c93 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
The BTF conflicts were simple overlapping changes.

The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02 10:55:32 -07:00
Greg Kroah-Hartman d2fc88a61b Merge 4.18-rc7 into driver-core-next
We need the driver core changes in here as well for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-30 10:08:09 +02:00
Linus Torvalds a5f9e5dab3 Driver core fixes for 4.18-rc7
This is a single driver core fix for 4.18-rc7.  It partially reverts a
 previous commit to resolve some reported issues.
 
 It has been in linux-next for a while now with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW1nVXg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylt+ACgnOBM409ab+U2z/0EZcJrd3fXjXcAn1XD1e5p
 Y0fBLaJ/sB+VpyiRP/gK
 =WxMr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "This is a single driver core fix for 4.18-rc7. It partially reverts a
  previous commit to resolve some reported issues.

  It has been in linux-next for a while now with no reported issues"

* tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Partially revert "driver core: correct device's shutdown order"
2018-07-26 09:25:03 -07:00
Akinobu Mita 75eb3a67a2
regmap: sccb: fix typo and sort headers alphabetically
Fix typos 's/wit/with/' in the comments and sort headers alphabetically
in order to avoid duplicate includes in future.

Fixes: bcf7eac3d9 ("regmap: add SCCB support")
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-23 18:05:08 +01:00
Mark Brown 0afdd676f6
Merge branch 'i2c/smbus_xfer_unlock-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into regmap-4.19 for sccb dependency 2018-07-23 18:02:28 +01:00
Benjamin Gaignard e16f4f3e0b base: core: Remove WARN_ON from link dependencies check
In some cases the link between between customer and supplier
already exist, for example when a device use its parent as a supplier.
Do not warn about already existing dependencies because device_link_add()
takes care of this case.

Link: http://lkml.kernel.org/r/20180709111753eucas1p1f32e66fb2f7ea3216097cd72a132355d~-rzycA5Rg0378203782eucas1p1C@eucas1p1.samsung.com

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:51:44 +02:00
Pingfan Liu 3297c8fc65 drivers/base: stop new probing during shutdown
There is a race window in device_shutdown(), which may cause
-1. parent device shut down before child or
-2. no shutdown on a new probing device.

For 1st, taking the following scenario:
         device_shutdown                        new plugin device
  list_del_init(parent_dev);
  spin_unlock(list_lock);
                                                  device_add(child)
                                                  probe child
  shutdown parent_dev
       --> now child is on the tail of devices_kset

For 2nd, taking the following scenario:
         device_shutdown                        new plugin device
                                                  device_add(dev)
  device_lock(dev);
  ...
  device_unlock(dev);
                                                  probe dev
       --> now, the new occurred dev has no opportunity to shutdown

To fix this race issue, just prevent the new probing request. With this
logic, device_shutdown() is more similar to dpm_prepare().

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:51:44 +02:00
Dmitry Torokhov 9944e894c1 driver core: set up ownership of class devices in sysfs
Plumb in get_ownership() callback for devices belonging to a class so that
they can be created with uid/gid different from global root. This will
allow network devices in a container to belong to container's root and not
global root.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 23:44:35 -07:00
Mark Brown e594a0636b regmap: Add support for SCCB
This is an I2C subset.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltPUrMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0KODB/oDV+4c82VIUopoaXxK8PbBqDMn5n2r
 EKyb1D/GFiT54x2666arRT1NymL/uk6/nK1hryd/4HE5zB1lUQnu/Z7HCHgF4N+/
 iWHtAgFUSZtNlMTRT6DW/tcsNDGnH9vjNJUhOLH9Y21h3Q4BpOo5HQVR8ynN4TDh
 2inSy5qgADyrosxRpW5mp0Nt0tpFTfvYOHoRaLTbQUbBnpb/MmqcTzkYHcVNqA8V
 7+e9/SOVU0XXHQD5k28F7eB84Mk+TXQrZQ181RwNOKUf3je86Im6WfrFqKHqKP5N
 UAq28AjsjRiBs1qwOYK0ytWR8gQvs39cZmdud507R1mLWEO4/++TruRt
 =wkUm
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltPUyETHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0CJsB/oD+83KWX8V1Q4HhaO3e6BN2SPYphQr
 jbImC9QUSRl/65+0ek6VjqLu4znY/LARRjNThN0l01wvWv7+h71DJBSKL67zK9en
 h4Lr8ZoewBQ408YaC5zl7ilFXgRBMhfCanDWWHv8jAv1rk9VQU8q9uNGo518e0Ks
 2Gg/zTmQYp7dNMHsVO4AEr3UQye1yZdGdP1q1yk3nbNgZbDq4xWWZWl1p4Iy+QG3
 e4SY+OYenQC/+pafUQOzPoiG3I/f8RAQG9SAtne+gtIyF85+Q8mVizuU89GdtH3O
 rKcaiNk/FpSbcBxAXEGb0qNy6PW6gnAbSznrOdc7MEj2V5E3KfoR7oVO
 =VO/+
 -----END PGP SIGNATURE-----

Merge tag 'regmap-sccb' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into regmap-4.19

regmap: Add support for SCCB

This is an I2C subset.
2018-07-18 15:47:54 +01:00
Akinobu Mita bcf7eac3d9
regmap: add SCCB support
This adds Serial Camera Control Bus (SCCB) support for regmap API that
is intended to be used by some of Omnivision sensor drivers.

The ov772x and ov9650 drivers are going to use this SCCB regmap API.

The ov772x driver was previously only worked with the i2c controller
drivers that support I2C_FUNC_PROTOCOL_MANGLING, because the ov772x
device doesn't support repeated starts.  After commit 0b964d183c
("media: ov772x: allow i2c controllers without
I2C_FUNC_PROTOCOL_MANGLING"), reading ov772x register is replaced with
issuing two separated i2c messages in order to avoid repeated start.
Using this SCCB regmap hides the implementation detail.

The ov9650 driver also issues two separated i2c messages to read the
registers as the device doesn't support repeated start.  So it can
make use of this SCCB regmap.

Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18 15:45:23 +01:00
Mimi Zohar 6e852651f2 firmware: add call to LSM hook before firmware sysfs fallback
Add an LSM hook prior to allowing firmware sysfs fallback loading.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-07-16 12:31:57 -07:00
Benjamin Herrenschmidt 726e410979 drivers: core: Remove glue dirs from sysfs earlier
For devices with a class, we create a "glue" directory between
the parent device and the new device with the class name.

This directory is never "explicitely" removed when empty however,
this is left to the implicit sysfs removal done by kobject_release()
when the object loses its last reference via kobject_put().

This is problematic because as long as it's not been removed from
sysfs, it is still present in the class kset and in sysfs directory
structure.

The presence in the class kset exposes a use after free bug fixed
by the previous patch, but the presence in sysfs means that until
the kobject is released, which can take a while (especially with
kobject debugging), any attempt at re-creating such as binding a
new device for that class/parent pair, will result in a sysfs
duplicate file name error.

This fixes it by instead doing an explicit kobject_del() when
the glue dir is empty, by keeping track of the number of
child devices of the gluedir.

This is made easy by the fact that all glue dir operations are
done with a global mutex, and there's already a function
(cleanup_glue_dir) called in all the right places taking that
mutex that can be enhanced for this. It appears that this was
in fact the intent of the function, but the implementation was
wrong.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 13:42:02 +02:00
Shaokun Zhang 46d3a03781 driver core: remove unnecessary function extern declare
device_private_init is called only in core.c, extern declare is
unnecessary and make it static.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 13:32:20 +02:00
Srinivas Kandagatla e76ad18b56
regmap: slimbus: add support to multi read/write
SLIMbus supports upto 16 bytes in value management messages,
so add support to read/writes upto 16 bytes.

This also removes redundant single register reg_read/reg_write.

Also useful for paged register access on SLIMbus interfaced codecs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-11 11:58:04 +01:00
Rafael J. Wysocki 722e5f2b1e driver core: Partially revert "driver core: correct device's shutdown order"
Commit 52cdbdd498 (driver core: correct device's shutdown order)
introduced a regression by breaking device shutdown on some systems.

Namely, the devices_kset_move_last() call in really_probe() added by
that commit is a mistake as it may cause parents to follow children
in the devices_kset list which then causes shutdown to fail.  For
example, if a device has children before really_probe() is called
for it (which is not uncommon), that call will cause it to be
reordered after the children in the devices_kset list and the
ordering of that list will not reflect the correct device shutdown
order any more.

Also it causes the devices_kset list to be constantly reordered
until all drivers have been probed which is totally pointless
overhead in the majority of cases and it only covered an issue
with system shutdown, while system-wide suspend/resume potentially
had the same issue on the affected platforms (which was not covered).

Moreover, the shutdown issue originally addressed by the change in
really_probe() made by commit 52cdbdd498 is not present in 4.18-rc
any more, since dra7 started to use the sdhci-omap driver which
doesn't disable any regulators during shutdown, so the really_probe()
part of commit 52cdbdd498 can be safely reverted.  [The original
issue was related to the omap_hsmmc driver used by dra7 previously.]

For the above reasons, revert the really_probe() modifications made
by commit 52cdbdd498.

The other code changes made by commit 52cdbdd498 are useful and
they need not be reverted.

Fixes: 52cdbdd498 (driver core: correct device's shutdown order)
Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/
Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10 17:47:43 +02:00
Rob Herring e01afc3250 PM / Domains: Stop deferring probe at the end of initcall
All PM domain drivers must be built-in (at least those using DT), so
there is no point deferring probe after initcalls are done. Continuing
to defer probe may prevent booting successfully even if managing PM
domains is not required. This can happen if the user failed to enable
the driver or if power-domains are added to a platform's DT, but there
is not yet a driver (e.g. a new DTB with an old kernel).

Call the driver core function driver_deferred_probe_check_init_done()
instead of just returning -EPROBE_DEFER to stop deferring probe when
initcalls are done.

Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10 17:22:35 +02:00
Rob Herring 25b4e70dcc driver core: allow stopping deferred probe after init
Deferred probe will currently wait forever on dependent devices to probe,
but sometimes a driver will never exist. It's also not always critical for
a driver to exist. Platforms can rely on default configuration from the
bootloader or reset defaults for things such as pinctrl and power domains.
This is often the case with initial platform support until various drivers
get enabled. There's at least 2 scenarios where deferred probe can render
a platform broken. Both involve using a DT which has more devices and
dependencies than the kernel supports. The 1st case is a driver may be
disabled in the kernel config. The 2nd case is the kernel version may
simply not have the dependent driver. This can happen if using a newer DT
(provided by firmware perhaps) with a stable kernel version. Deferred
probe issues can be difficult to debug especially if the console has
dependencies or userspace fails to boot to a shell.

There are also cases like IOMMUs where only built-in drivers are
supported, so deferring probe after initcalls is not needed. The IOMMU
subsystem implemented its own mechanism to handle this using OF_DECLARE
linker sections.

This commit adds makes ending deferred probe conditional on initcalls
being completed or a debug timeout. Subsystems or drivers may opt-in by
calling driver_deferred_probe_check_init_done() instead of
unconditionally returning -EPROBE_DEFER. They may use additional
information from DT or kernel's config to decide whether to continue to
defer probe or not.

The timeout mechanism is intended for debug purposes and WARNs loudly.
The remaining deferred probe pending list will also be dumped after the
timeout. Not that this timeout won't work for the console which needs
to be enabled before userspace starts. However, if the console's
dependencies are resolved, then the kernel log will be printed (as
opposed to no output).

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10 17:22:35 +02:00
Vivek Gautam 1689cac5b3 driver core: Add flag to autoremove device link on supplier unbind
Add a flag to autoremove the device links on supplier driver
unbind. This obviates the need to explicitly delete the link
in the remove path.
We remove these links only when the supplier's link to its
consumers has gone to DL_STATE_SUPPLIER_UNBIND state.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-09 12:14:31 +02:00
Vivek Gautam e88728f46c driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER
Now that we want to add another flag to autoremove the device link
on supplier unbind, it's fair to rename the existing flag from
DL_FLAG_AUTOREMOVE to DL_FLAG_AUTOREMOVE_CONSUMER so that we can
add similar flag for supplier later.
And, while we are touching device.h, fix a doc build warning.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-09 12:14:31 +02:00
Ulf Hansson 27dceb81f4 PM / Domains: Introduce dev_pm_domain_attach_by_name()
For the multiple PM domain case, let's introduce a new API called
dev_pm_domain_attach_by_name(). This allows a consumer driver to associate
its device with one of its PM domains, by using a name based lookup.

Do note that, currently it's only genpd that supports multiple PM domains
per device, but dev_pm_domain_attach_by_name() can easily by extended to
cover other PM domain types, if/when needed.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-09 12:11:02 +02:00
Ulf Hansson 5d6be70add PM / Domains: Introduce option to attach a device by name to genpd
For the multiple PM domain case, let's introduce a new function called
genpd_dev_pm_attach_by_name(). This allows a device to be associated with
its PM domain through genpd, by using a name based lookup.

Note that, genpd_dev_pm_attach_by_name() shall only be called by the driver
core / PM core, similar to how the existing dev_pm_domain_attach_by_id()
makes use of genpd_dev_pm_attach_by_id(). However, this is implemented by
following changes on top.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-09 12:11:02 +02:00
Javier Martinez Canillas 28af109a57 driver core: add a debugfs entry to show deferred devices
With Device Trees (DT), the dependencies of the devices are defined in the
DT, then the drivers parse that information to lookup the needed resources
that have as dependencies.

Since drivers and devices are registered in a non-deterministic way, it is
possible that a device that is a dependency has not been registered yet by
the time that is looked up.

In this case the driver that requires this dependency cannot probe and has
to defer it. So the driver core adds it to a list of deferred devices that
is iterated again every time that a new driver is probed successfully.

For debugging purposes it may be useful to know what are the devices whose
probe function was deferred. Add a debugfs entry showing that information.

  $ cat /sys/kernel/debug/devices_deferred
  48070000.i2c:twl@48:bci
  musb-hdrc.0.auto
  omapdrm.0

This information could be obtained partially by enabling debugging, but it
means that the kernel log has to be parsed and the probe deferral balanced
with the successes. This can be error probe and has to be done in a ad-hoc
manner by everyone who needs to debug these kind of issues.

Since the information is already known by the kernel, just show it to make
it easier to debug.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-08 15:55:03 +02:00
Wesley W. Terpstra 319b11ef57 base: fix order of OF initialization
This fixes: [    0.010000] cpu cpu0: Error -2 creating of_node link
... which you get for every CPU on all architectures that use
CONFIG_GENERIC_CPU_DEVICES.

In that case, driver_init() calls cpu_dev_init() before calling
of_core_init(). Then we get the callchain:

  cpu_dev_init()
    -> cpu_dev_register_generic()
    -> register_cpu(cpu, i)
    -> device_register(&cpu->dev)
    -> device_add(dev)
    -> device_add_class_symlinks(dev)

... in device_add_class_symlinks, we we dev->of_node, and call
sysfs_create_link(), which fails because we haven't called
of_core_init() to register the sysfs devicetree directory yet.

Signed-off-by: Wesley W. Terpstra <wesley@sifive.com>
[hch: updated the changelog based on review feedback]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07 17:54:29 +02:00
Sudeep Holla 448a5a552f drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
of_property_read_u32 searches for a property in a device node and read
a 32-bit value from it. Instead of using of_get_property to get the
property and then read 32-bit value using of_read_number, we can
simplify it by using of_property_read_u32.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07 17:20:47 +02:00
Joe Perches 663336ee26 device: Add #define dev_fmt similar to #define pr_fmt
Add a prefixing macro to dev_<level> uses similar to the pr_fmt
prefixing macro used in pr_<level> calls.

This can help avoid some string duplication in dev_<level> uses.

The default, like pr_fmt, is an empty #define dev_fmt(fmt) fmt

Rename the existing dev_<level> functions to _dev_<level> and
introduce #define dev_<level> _dev_<level> macros that use the
new #define dev_fmt

Miscellanea:

o Consistently use #defines with fmt, ... and ##__VA_ARGS__
o Remove unnecessary externs

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 17:50:19 +02:00
Todd Poynor 0a50f61c4f drivers: base: initcall_debug logs for driver probe times
Add initcall_debug logs for each driver device probe call, for example:

   probe of a3800000.ramoops returned 1 after 3007 usecs

This replaces the previous code added to report times for deferred
probes.  It also reports OF platform bus device creates that were
formerly lumped together in a single entry for function
of_platform_default_populate_init, as well as helping to annotate other
initcalls that involve device probing.

Remove restriction on printing probe times only during initcalls, since
initcall_debug now continues to show driver timing info past the boot
phase.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:53:17 +02:00
pascal paillet d8842211b6
driver core: Add device_link_remove function
Device_link_remove uses the same arguments than device_link_add. The Goal
is to avoid storing the link pointer.

Signed-off-by: pascal paillet <p.paillet@st.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-05 18:55:08 +01:00
Ulf Hansson 895b66129a PM / Domains: Don't power on at attach for the multi PM domain case
There are no legacy behavior in drivers to consider while attaching a
device to genpd - for the multiple PM domain case.

For that reason, let's instead require the driver to runtime resume the
device, via calling pm_runtime_get_sync() for example, when it needs to
power on the corresponding PM domain.

This allows us to improve the situation during attach. Instead of always
power on the PM domain, which may be unnecessary, let's leave it in its
current state. Additionally, to avoid the PM domain to stay powered on,
let's schedule a power off work.

Fixes: 3c095f32a9 (PM / Domains: Add support for multi PM domains ...)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-03 16:42:51 +02:00
Viresh Kumar ad6384ba3a PM / Domains: Rename opp_node to np
The DT node passed here isn't necessarily an OPP node, as this routine
can also be used for cases where the "required-opps" property is present
directly in the device's node. Rename it.

This also removes a stale comment.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-25 09:41:37 +02:00
Linus Torvalds 26c92a38ce Power management changes for 4.18-rc2
- Fix the PM core to avoid introducing a runtime PM usage counter
    imbalance when adding device links during driver probe (Rafael
    Wysocki).
 
  - Fix the operating performance points (OPP) framework to ensure
    that the regulator voltage is always updated as appropriate when
    updating clock rates (Waldemar Rymarkiewicz).
 
  - Fix the intel_pstate driver to use correct max/min limits for
    cores with differing maximum frequences (Srinivas Pandruvada).
 
  - Fix a typo in the intel_pstate driver documentation (Rafael
    Wysocki).
 
  - Fix two issues with the recently added Kryo cpufreq driver (Ilia
    Lin).
 
  - Fix two recent regressions and some other minor issues in the
    turbostat utility and extend it to provide some more diagnostic
    information (Len Brown, Nathan Ciobanu).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbK6AcAAoJEILEb/54YlRx0ooP/3IQbisKSXSql0nnT2WxexhE
 OvsPFQ17R34NuvGFXe88ZeWMqjFZecCiVTXsXKNV8P8yqMj1e3xK6puEFpnn9BTw
 XoKDpRnL5O4YWiEJ7dedawUvdK7PB42aA8sL+JO4kN/wsc164Ed5gyiYm2YhxMwO
 jLjC7ZgCvxChP4ge7jGJZ8I37wwoU0XKg7bnB+nzsLeSkVrwc3Z8/E4JNGwcN9Xx
 qOiR+M/EprZESkcrTzWi/kpqUSFhE1I7yZfgS4FMEPAu2Ps/Xv/5Py5SWIs9C6tS
 DJqM6StR1G4zQ7X0hexF0ddLjBktIxT8f2eCcmvjjAGhzWX9CARQRQ3oVwkF+FqM
 aYqxq1sB10Sif2Lq+xRf5VMx9RD1PzHoS2Rf0LqO4uQDULmNOrN4b/IptYNkpsDB
 UR3SIS9ZWVHDmALMTZSiZdp0ol6NyIeIvyZbdho81RAF64YKeL0YMzChJJ73VIsV
 a5yvEKS+60H8UgRADIG8/zDj5h7YUZHdSbHWw896KKtvVFFZ1O6f6cAQsvMSxHis
 0A0f46+V2WvwcqdO1dZeCrhDlne4f0z978Va2b4Xmobq3sN4CUFrYgpVHVQiFQ39
 x5o3+Wo4Gy73PpTi2HTw0r/vBu8t+mQxrTxJH37wt6HKLlftgymvCEByGK9BApJ+
 DLhu4YFI+dRC4l3ndLEz
 =QQoY
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These are mostly fixes, including some fixes for changes made during
  the recent merge window and some "stable" material, plus some minor
  extensions of the turbostat utility.

  Specifics:

   - Fix the PM core to avoid introducing a runtime PM usage counter
     imbalance when adding device links during driver probe (Rafael
     Wysocki).

   - Fix the operating performance points (OPP) framework to ensure that
     the regulator voltage is always updated as appropriate when
     updating clock rates (Waldemar Rymarkiewicz).

   - Fix the intel_pstate driver to use correct max/min limits for cores
     with differing maximum frequences (Srinivas Pandruvada).

   - Fix a typo in the intel_pstate driver documentation (Rafael
     Wysocki).

   - Fix two issues with the recently added Kryo cpufreq driver (Ilia
     Lin).

   - Fix two recent regressions and some other minor issues in the
     turbostat utility and extend it to provide some more diagnostic
     information (Len Brown, Nathan Ciobanu)"

* tag 'pm-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Documentation: intel_pstate: Fix typo
  tools/power turbostat: version 18.06.20
  tools/power turbostat: add the missing command line switches
  tools/power turbostat: add single character tokens to help
  tools/power turbostat: alphabetize the help output
  tools/power turbostat: fix segfault on 'no node' machines
  tools/power turbostat: add optional APIC X2APIC columns
  tools/power turbostat: decode cpuid.1.HT
  tools/power turbostat: fix show/hide issues resulting from mis-merge
  PM / OPP: Update voltage in case freq == old_freq
  cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0
  cpufreq: kryo: Add module remove and exit
  cpufreq: kryo: Fix possible error code dereference
  PM / core: Fix supplier device runtime PM usage counter imbalance
2018-06-22 05:57:36 +09:00
Andi Kleen 17dbca1193 x86/speculation/l1tf: Add sysfs reporting for l1tf
L1TF core kernel workarounds are cheap and normally always enabled, However
they still should be reported in sysfs if the system is vulnerable or
mitigated. Add the necessary CPU feature/bug bits.

- Extend the existing checks for Meltdowns to determine if the system is
  vulnerable. All CPUs which are not vulnerable to Meltdown are also not
  vulnerable to L1TF

- Check for 32bit non PAE and emit a warning as there is no practical way
  for mitigation due to the limited physical address bits

- If the system has more than MAX_PA/2 physical memory the invert page
  workarounds don't protect the system against the L1TF attack anymore,
  because an inverted physical address will also point to valid
  memory. Print a warning in this case and report that the system is
  vulnerable.

Add a function which returns the PFN limit for the L1TF mitigation, which
will be used in follow up patches for sanity and range checks.

[ tglx: Renamed the CPU feature bit to L1TF_PTEINV ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-20 19:10:00 +02:00
Rafael J. Wysocki 47e5abfb54 PM / core: Fix supplier device runtime PM usage counter imbalance
If a device link is added via device_link_add() by the driver of the
link's consumer device, the supplier's runtime PM usage counter is
going to be dropped by the pm_runtime_put_suppliers() call in
driver_probe_device().  However, in that case it is not incremented
unless the supplier driver is already present and the link is not
stateless.  That leads to a runtime PM usage counter imbalance for
the supplier device in a few cases.

To prevent that from happening, bump up the supplier runtime
PM usage counter in device_link_add() for all links with the
DL_FLAG_PM_RUNTIME flag set that are added at the consumer probe
time.  Use pm_runtime_get_noresume() for that as the callers of
device_link_add() who want the supplier to be resumed by it are
expected to pass DL_FLAG_RPM_ACTIVE in flags to it anyway, but
additionally resume the supplier if the link is added during
consumer driver probe to retain the existing behavior for the
callers depending on it.

Fixes: 21d5c57b37 (PM / runtime: Use device links)
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-14 10:01:52 +02:00
Christoph Hellwig cf65a0f6f6 dma-mapping: move all DMA mapping code to kernel/dma
Currently the code is split over various files with dma- prefixes in the
lib/ and drives/base directories, and the number of files keeps growing.
Move them into a single directory to keep the code together and remove
the file name prefixes.  To match the irq infrastructure this directory
is placed under the kernel/ directory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-14 08:50:37 +02:00
Linus Torvalds d09fcecb0c Additional power management updates for 4.18-rc1
- Revert a recent PM core change that attempted to fix an issue
    related to device links, but introduced a regression (Rafael
    Wysocki).
 
  - Fix build when the recently added cpufreq driver for Kryo
    processors is selected by making it possible to build that
    driver as a module (Arnd Bergmann).
 
  - Fix the long idle detection mechanism in the out-of-band
    (ondemand and conservative) cpufreq governors (Chen Yu).
 
  - Add support for devices in multiple power domains to the
    generic power domains (genpd) framework (Ulf Hansson).
 
  - Add support for iowait boosting on systems with hardware-managed
    P-states (HWP) enabled to the intel_pstate driver and make it use
    that feature on systems with Skylake Xeon processors as it is
    reported to improve performance significantly on those systems
    (Srinivas Pandruvada).
 
  - Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq
    drivers (Colin Ian King, Suman Anna, Sébastien Szymanski).
 
  - Change the behavior of the wakeup_count device attribute in
    sysfs to expose the number of events when the device might have
    aborted system suspend in progress (Ravi Chandra Sadineni).
 
  - Fix two minor issues in the cpupower utility (Abhishek Goel,
    Colin Ian King).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbIOf+AAoJEILEb/54YlRxk5EQAIyLpvR0zdp2gMaMl3rbWqtM
 W6XpJbLzL4be9zHKDj4bycO6nbevPOr5oXgm3DQUaUvkLo86cUl2NJlNAv789UZR
 NQ8L51WiY4hG4WDrBQntEBw7TDBUDuo6TEa2/0WJQQhj6WQP821oehmF4G+N9A9h
 z9YhwbWNgivulyNy09nAcVgJ39cxUVWb9EmTXthp0KnyJzn8de+V3MxlEwJTAmHc
 jma9PEil9Key2rS8LRr+djvwa6tYKydOCjkA+o6m7Fo1IVaaVydDgciG4tjnsHNV
 wtEfbOZnisnkYrNEbViqQhhnsvSLkTtfAku58Ove5Kz2GPSPjyIoRrK7FUfDetr+
 ZQLWq6TPzR9u2m3kQfhHB6C463bGxd4s2BntPH2RLHbs82FENEtGkHdxQOv5B1tW
 Gvl9gF9ZDov6gL3jftNdhIz4rQVGaXQlY5/q+alV1I3jhyg7zddht4oh+nNt41XR
 ysszEg9K62w/QAuqZeUsHaR7pPoZZDQzr3TRkKX0uvl88jq4HUPj+aKqNYxq0IrZ
 uYd92gqvD7HH1UKRPqjvZ65Uj5WTbn7picAYJhTlQR4b73X0j66xDSZp/IZVpbEc
 ierDftBxdwklnfxrpy19yJKgIDB89zLP0IX+3BacEC+BWguI//MOb5X0EEpcf/WK
 eyG13J1wTF1qLzKDdur9
 =VROk
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These revert a recent PM core change that introduced a regression, fix
  the build when the recently added Kryo cpufreq driver is selected, add
  support for devices attached to multiple power domains to the generic
  power domains (genpd) framework, add support for iowait boosting on
  systens with hardware-managed P-states (HWP) enabled to the
  intel_pstate driver, modify the behavior of the wakeup_count device
  attribute in sysfs, fix a few issues and clean up some ugliness,
  mostly in cpufreq (core and drivers) and in the cpupower utility.

  Specifics:

   - Revert a recent PM core change that attempted to fix an issue
     related to device links, but introduced a regression (Rafael
     Wysocki)

   - Fix build when the recently added cpufreq driver for Kryo
     processors is selected by making it possible to build that driver
     as a module (Arnd Bergmann)

   - Fix the long idle detection mechanism in the out-of-band (ondemand
     and conservative) cpufreq governors (Chen Yu)

   - Add support for devices in multiple power domains to the generic
     power domains (genpd) framework (Ulf Hansson)

   - Add support for iowait boosting on systems with hardware-managed
     P-states (HWP) enabled to the intel_pstate driver and make it use
     that feature on systems with Skylake Xeon processors as it is
     reported to improve performance significantly on those systems
     (Srinivas Pandruvada)

   - Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq
     drivers (Colin Ian King, Suman Anna, Sébastien Szymanski)

   - Change the behavior of the wakeup_count device attribute in sysfs
     to expose the number of events when the device might have aborted
     system suspend in progress (Ravi Chandra Sadineni)

   - Fix two minor issues in the cpupower utility (Abhishek Goel, Colin
     Ian King)"

* tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "PM / runtime: Fixup reference counting of device link suppliers at probe"
  cpufreq: imx6q: check speed grades for i.MX6ULL
  cpufreq: governors: Fix long idle detection logic in load calculation
  cpufreq: intel_pstate: enable boost for Skylake Xeon
  PM / wakeup: Export wakeup_count instead of event_count via sysfs
  PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
  PM / Domains: Add support for multi PM domains per device to genpd
  PM / Domains: Split genpd_dev_pm_attach()
  PM / Domains: Don't attach devices in genpd with multi PM domains
  PM / Domains: dt: Allow power-domain property to be a list of specifiers
  cpufreq: intel_pstate: New sysfs entry to control HWP boost
  cpufreq: intel_pstate: HWP boost performance on IO wakeup
  cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
  cpufreq: ti-cpufreq: Use devres managed API in probe()
  cpufreq: ti-cpufreq: Fix an incorrect error return value
  cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
  cpufreq: kryo: allow building as a loadable module
  cpupower : Fix header name to read idle state name
  cpupower: fix spelling mistake: "logilename" -> "logfilename"
2018-06-13 07:24:18 -07:00
Rafael J. Wysocki 6a900f884e Merge branches 'pm-domains' and 'pm-tools'
Additional updates of the generic power domains (genpd) framework
(support for devices attached to multiple domains) and the cpupower
utility (minor fixes) for 4.18-rc1.

* pm-domains:
  PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
  PM / Domains: Add support for multi PM domains per device to genpd
  PM / Domains: Split genpd_dev_pm_attach()
  PM / Domains: Don't attach devices in genpd with multi PM domains
  PM / Domains: dt: Allow power-domain property to be a list of specifiers

* pm-tools:
  cpupower : Fix header name to read idle state name
  cpupower: fix spelling mistake: "logilename" -> "logfilename"
2018-06-13 11:08:44 +02:00
Kees Cook 42bc47b353 treewide: Use array_size() in vmalloc()
The vmalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vmalloc(a * b)

with:
        vmalloc(array_size(a, b))

as well as handling cases of:

        vmalloc(a * b * c)

with:

        vmalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vmalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vmalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vmalloc(C1 * C2 * C3, ...)
|
  vmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vmalloc(C1 * C2, ...)
|
  vmalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00