commit d8dd25a461 upstream.
When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops. This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.
This fixes the following unwinder warning:
WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b80f9866e upstream.
abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup
is and controls the activation of use_delay mechanism. Once a cgroup goes
over budget from forced IOs, it has to pay it back with its future budget.
The progress guarantee on debt paying comes from the iocg being active -
active iocgs are processed by the periodic timer, which ensures that as time
passes the debts dissipate and the iocg returns to normal operation.
However, both iocg activation and vdebt handling are asynchronous and a
sequence like the following may happen.
1. The iocg is in the process of being deactivated by the periodic timer.
2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns
without anything because it still sees that the iocg is already active.
3. The iocg is deactivated.
4. The bio from #2 is over budget but needs to be forced. It increases
abs_vdebt and goes over the threshold and enables use_delay.
5. IO control is enabled for the iocg's subtree and now IOs are attributed
to the descendant cgroups and the iocg itself no longer issues IOs.
This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no
further IOs which can activate it. This can end up unduly punishing all the
descendants cgroups.
The usual throttling path has the same issue - the iocg must be active while
throttled to ensure that future event will wake it up - and solves the
problem by synchronizing the throttling path with a spinlock. abs_vdebt
handling is another form of overage handling and shares a lot of
characteristics including the fact that it isn't in the hottest path.
This patch fixes the above and other possible races by strictly
synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vlad Dmitriev <vvd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Fixes: e1518f63f2 ("blk-iocost: Don't let merges push vtime into the future")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c75bec79fc upstream.
To get the changes in:
3e3c8ca5a3 ("arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers")
Silencing this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h'
diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
Which will probably end up enabling the use of "clone3" in 'perf trace -e',
haven't checked the build with this change on an arm64 system.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amanieu d'Antras <amanieu@gmail.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa915931ac upstream.
Fedora binutils has been patched to show "other info" for a symbol at the
end of the line. This was done in order to support unmaintained scripts
that would break with the extra info. [1]
[1] b8265c46f7
This in turn has been done to fix the build of ruby, because of checksec.
[2] Thanks Michael Ellerman for the pointer.
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1479302
As libbpf Makefile is not unmaintained, we can simply deal with either
output format, by just removing the "other info" field, as it always comes
inside brackets.
Fixes: 3464afdf11 (libbpf: Fix readelf output parsing on powerpc with recent binutils)
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Link: https://lore.kernel.org/bpf/20191213101114.GA3986@calabresa
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b87080eab4 ]
After successfully running the IPC msgque test once, subsequent runs
result in a test failure:
$ sudo ./run_kselftest.sh
TAP version 13
1..1
# selftests: ipc: msgque
# Failed to get stats for IPC queue with id 0
# Failed to dump queue: -22
# Bail out!
# # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
not ok 1 selftests: ipc: msgque # exit=1
The dump_queue() function loops through the possible message queue index
values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id
represents the index value. The first time the test is ran, the initial
index value of 0 is valid and the test is able to complete. The index
value of 0 is not valid in subsequent test runs and the loop attempts to
try index values of 1, 2, 3, and so on until a valid index value is
found that corresponds to the message queue created earlier in the test.
The msgctl() syscall returns -1 and sets errno to EINVAL when invalid
index values are used. The test failure is caused by incorrectly
comparing errno to -EINVAL when cycling through possible index values.
Fix invalid test failures on subsequent runs of the msgque test by
correctly comparing errno values to a non-negated EINVAL.
Fixes: 3a665531a3 ("selftests: IPC message queue copy feature test")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8782e7cab5 ]
Historically, the relocation symbols for ORC entries have only been
section symbols:
.text+0: sp:sp+8 bp:(und) type:call end:0
However, the Clang assembler is aggressive about stripping section
symbols. In that case we will need to use function symbols:
freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0
In preparation for the generation of such entries in "objtool orc
generate", add support for reading them in "objtool orc dump".
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd841d6154 ]
CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path. This includes __builtin_unreachable(). Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2. In this case objtool rightfully detects
that the second UD2 is unreachable:
init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction
We weren't able to figure out a way to get rid of the double UD2s, so
just silence the warning.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4734b0fefb ]
Builds of Fedora's kernel-tools package started to fail with "may be
used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and
bpf_get_link_xdp_info() on the s390 architecture.
Although libbpf_netlink_open() always returns a negative number when it
does not set *nl_pid, the compiler does not determine this and thus
believes the variable might be used uninitialized. Assuage gcc's fears
by explicitly initializing nl_pid.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6e7e63cbb0 upstream.
When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.
Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.
To be able to use __is_pointer_value() in check_stack_read(), move it up.
Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.
In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].
The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:
// r7 = map_pointer
BPF_LD_MAP_FD(BPF_REG_7, small_map),
// r8 = launder(map_pointer)
BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
BPF_MOV64_IMM(BPF_REG_1, 0),
((struct bpf_insn) {
.code = BPF_STX | BPF_DW | BPF_XADD,
.dst_reg = BPF_REG_FP,
.src_reg = BPF_REG_1,
.off = -8
}),
BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),
// store r8 into map
BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN()
[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf01699ee2 upstream.
Commit 7ed1c1901f ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901f (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Kelly <martin@martingkelly.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c1dd4c110 ]
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: ca7a03c417 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b43e78f65b ]
As the ftrace selftests can run for a long period of time, disable the
timeout that the general selftests have. If a selftest hangs, then it
probably means the machine will hang too.
Link: https://lore.kernel.org/r/alpine.LSU.2.21.1911131604170.18679@pobox.suse.cz
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3464afdf11 ]
On powerpc with recent versions of binutils, readelf outputs an extra
field when dumping the symbols of an object file. For example:
35: 0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct
The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to
be computed correctly and causes the check_abi target to fail.
Fix that by looking for the symbol name in the last field instead of the
8th one. This way it should also cope with future extra fields.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/bpf/20191201195728.4161537-1-aurelien@aurel32.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d573a0752 ]
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f77679962 ]
Out of tree build using
make M=tools/test/nvdimm O=/tmp/build -C /tmp/build
fails with the following error
make: Entering directory '/tmp/build'
CC [M] tools/testing/nvdimm/test/nfit.o
linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory
19 | #include <nd-core.h>
| ^~~~~~~~~~~
compilation terminated.
That is because the kbuild file uses $(src) which points to
tools/testing/nvdimm, $(srctree) correctly points to root of the linux
source tree.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0e71d6020 ]
When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the
compilation of tools/testing/nvdimm fails with:
Building modules, stage 2.
MODPOST 11 modules
ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined!
Fix the problem by calling dax_pmem_compat_test() only if the kernel has
the required functionality.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123154720.12097-1-jack@suse.cz
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ no upstream commit ]
Switch the comparison, so that is_branch_taken() will recognize that below
branch is never taken:
[...]
17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
17: (67) r8 <<= 32
18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...]
18: (c7) r8 s>>= 32
19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
19: (6d) if r1 s> r8 goto pc+16
[...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
[...]
Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.
For the sake of the test_verifier, it is probably not needed here:
# ./test_verifier 101
#101/p bpf_get_stack return R0 within range OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
I haven't seen this issue in test_progs* though, they are passing fine:
# ./test_progs-no_alu32 -t get_stack
Switching to flavor 'no_alu32' subdirectory...
#20 get_stack_raw_tp:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
# ./test_progs -t get_stack
#20 get_stack_raw_tp:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2db08c7a1 upstream.
Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.
The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ac26e9973 upstream.
With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],
#101/p bpf_get_stack return R0 within range FAIL
Failed to load prog 'Success'!
[..]
14: (85) call bpf_get_stack#67
R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
R3_w=inv48
15:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
15: (b7) r1 = 0
16:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
16: (bf) r8 = r0
17:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
17: (67) r8 <<= 32
18:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=9223372032559808512,
umax_value=18446744069414584320,
var_off=(0x0; 0xffffffff00000000),
s32_min_value=0,
s32_max_value=0,
u32_max_value=0,
var32_off=(0x0; 0x0))
18: (c7) r8 s>>= 32
19
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=2147483647,
var32_off=(0x0; 0xffffffff))
19: (cd) if r1 s< r8 goto pc+16
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=0,
var32_off=(0x0; 0xffffffff))
20:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=0,
R9=inv48
20: (1f) r9 -= r8
21: (bf) r2 = r7
22:
R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
22: (0f) r2 += r8
value -2147483648 makes map_value pointer be out of bounds
After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.
Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.
Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b401efc120 upstream.
If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:
drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame
Fix it by comparing the function, instead of the section and offset.
Fixes: 13810435b9 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3b10649a8 upstream.
Previously we could get the report of branch type statistics.
For example:
# perf record -j any,save_type ...
# t perf report --stdio
#
# Branch Statistics:
#
COND_FWD: 40.6%
COND_BWD: 4.1%
CROSS_4K: 24.7%
CROSS_2M: 12.3%
COND: 44.7%
UNCOND: 0.0%
IND: 6.1%
CALL: 24.5%
RET: 24.7%
But now for the recent perf, it can't report the branch type statistics.
It's a regression issue caused by commit 40c39e3046 ("perf report: Fix
a no annotate browser displayed issue"), which only counts the branch
type statistics for browser mode.
This patch moves the branch_type_count() outside of ui__has_annotation()
checking, then branch type statistics can work for stdio mode.
Fixes: 40c39e3046 ("perf report: Fix a no annotate browser displayed issue")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200313134607.12873-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9c9ce4e59 upstream.
Python 3.8 changed the output of 'python-config --ldflags' to no longer
include the '-lpythonX.Y' flag (this apparently fixed an issue loading
modules with a statically linked Python executable). The libpython
feature check in linux/build/feature fails if the Python library is not
included in FEATURE_CHECK_LDFLAGS-libpython variable.
This adds a check in the Makefile to determine if PYTHON_CONFIG accepts
the '--embed' flag and passes that flag alongside '--ldflags' if so.
tools/perf is the only place the libpython feature check is used.
Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cabc30da10 upstream.
Commit fa7b9a805c ("tools/selftest/vm: allow choosing mem size and page
size in map_hugetlb") added the possibility to change the size of memory
mapped for the test, but left the read and write test using the default
value. This is unnoticed when mapping a length greater than the default
one, but segfaults otherwise.
Fix read_bytes() and write_bytes() by giving them the real length.
Also fix the call to munmap().
Fixes: fa7b9a805c ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/9a404a13c871c4bd0ba9ede68f69a1225180dd7e.1580978385.git.christophe.leroy@c-s.fr
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eea274d64e upstream.
It was noticed that mlock2 tests are failing after 9c4e6b1a70 ("mm,
mlock, vmscan: no more skipping pagevecs") because the patch has changed
the timing on when the page is added to the unevictable LRU list and thus
gains the unevictable page flag.
The test was just too dependent on the implementation details which were
true at the time when it was introduced. Page flags and the timing when
they are set is something no userspace should ever depend on. The test
should be testing only for the user observable contract of the tested
syscalls. Those are defined pretty well for the mlock and there are other
means for testing them. In fact this is already done and testing for page
flags can be safely dropped to achieve the aimed purpose. Present bits
can be checked by /proc/<pid>/smaps RSS field and the locking state by
VmFlags although I would argue that Locked: field would be more
appropriate.
Drop all the page flag machinery and considerably simplify the test. This
should be more robust for future kernel changes while checking the
promised contract is still valid.
Fixes: 9c4e6b1a70 ("mm, mlock, vmscan: no more skipping pagevecs")
Reported-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200324154218.GS19542@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e934cf5ac upstream.
xas_for_each_marked() is using entry == NULL as a termination condition
of the iteration. When xas_for_each_marked() is used protected only by
RCU, this can however race with xas_store(xas, NULL) in the following
way:
TASK1 TASK2
page_cache_delete() find_get_pages_range_tag()
xas_for_each_marked()
xas_find_marked()
off = xas_find_chunk()
xas_store(&xas, NULL)
xas_init_marks(&xas);
...
rcu_assign_pointer(*slot, NULL);
entry = xa_entry(off);
And thus xas_for_each_marked() terminates prematurely possibly leading
to missed entries in the iteration (translating to missing writeback of
some pages or a similar problem).
If we find a NULL entry that has been marked, skip it (unless we're trying
to allocate an entry).
Reported-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
Fixes: ef8e5717db ("page cache: Convert delete_batch to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82f04bfe2a upstream.
Commit 0161a94e2d ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:
No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop.
Fix that.
Fixes: 0161a94e2d ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83a9b6f639 ]
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes: 11fb60d108 ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4054ab64e2 upstream.
A recent change to the netlink code: 6e237d099f ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32). Yafang
reported this error message for tools/accounting/getdelays.c.
send_cmd() is wrongly adding 1 to the attribute length. As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.
Fixes: 9e06d3f9f6 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f81c5efc0 ]
Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us
When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d005ba6a ]
Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
[-Wstringop-truncation]
reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit db2c549407 upstream.
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca8183699 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be40920fbf upstream.
When I tried to compile tools/perf from the top directory with the -C
option, the O= option didn't work correctly if I passed a relative path:
$ make O=BUILD -C tools/perf/
make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop.
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf'
The O= directory existence check failed because the check script ran in
the build target directory instead of the directory where I ran the make
command.
To fix that, once change directory to $(PWD) and check O= directory,
since the PWD is set to where the make command runs.
Fixes: c883122acc ("perf tools: Let O= makes handle relative paths")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1efde27542 upstream.
Do not depend on dwfl_module_addrsym() because it can fail on user-space
shared libraries.
Actually, same bug was fixed by commit 664fee3dc3 ("perf probe: Do not
use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit
07d3698578 ("perf probe: Fix wrong address verification) reverted to
get actual symbol address from symtab.
This fixes it again by getting symbol address from DIE, and only if the
DIE has only address range, it uses dwfl_module_addrsym().
Fixes: 07d3698578 ("perf probe: Fix wrong address verification)
Reported-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b8d68f1ce upstream.
When we put an event with multiple probes, perf-probe fails to delete
with filters. This comes from a failure to list up the event name
because of overwrapping its name.
To fix this issue, skip to list up the event which has same name.
Without this patch:
# perf probe -l \*
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:21@
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:25@
probe_perf:map__map_ip (on append_inlines:12@util/machine.c in
probe_perf:map__map_ip (on unwind_entry:19@util/machine.c in /
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
# perf probe -d \*
"*" does not hit any event.
Error: Failed to delete events. Reason: No such file or directory (Code: -2)
With it:
# perf probe -d \*
Removed event: probe_perf:map__map_ip
#
Fixes: 72363540c0 ("perf probe: Support multiprobe event")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158287666197.16697.7514373548551863562.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2de7fb60a4 ]
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef89d05451 ]
Currently if you build with O=... the rseq tests don't build:
$ make O=$PWD/output -C tools/testing/selftests/ TARGETS=rseq
make: Entering directory '/linux/tools/testing/selftests'
...
make[1]: Entering directory '/linux/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /linux/output/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /linux/output/rseq/basic_test
/usr/bin/ld: cannot find -lrseq
collect2: error: ld returned 1 exit status
This is because the library search path points to the source
directory, not the output.
We can fix it by changing the library search path to $(OUTPUT).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f649bd9dd5 upstream.
Since commit 3b2323c2c1 ("perf bench futex: Use cpumaps") the default
number of threads the benchmark uses got changed from number of online
CPUs to zero:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time.
[Run 1]: Wokeup 0 of 0 threads in 0.0000 ms
[...]
[Run 10]: Wokeup 0 of 0 threads in 0.0000 ms
Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%)
Restore the old behavior by grabbing the number of online CPUs via
cpu->nr:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time.
[Run 1]: Wokeup 8 of 8 threads in 0.0260 ms
[...]
[Run 10]: Wokeup 8 of 8 threads in 0.0270 ms
Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%)
Fixes: 3b2323c2c1 ("perf bench futex: Use cpumaps")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200305083714.9381-3-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d00fc477a upstream.
Before rebooting the box, a "ssh sync" is called to the test machine to see
if it is alive or not. But if the test machine is in a partial state, that
ssh may never actually finish, and the ktest test hangs.
Add a 10 second timeout to the sync test, which will fail after 10 seconds
and then cause the test to reboot the test machine.
Cc: stable@vger.kernel.org
Fixes: 6474ace999 ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0d29169a70 ]
This patch update {ipv4, ipv6}_addr_metric_test with
1. Set metric of address with peer route and see if the route added
correctly.
2. Modify metric and peer address for peer route and see if the route
changed correctly.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6bc34c5ec upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the event is disabled, don't enable it again here.
Based-on-patch-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9f2833cb4 upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the cs_etm event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
coresight feature, but the code seems buggy same as arm-spe and
intel-pt.
Tester notes:
Thanks for looping, Adrian. Applied this patch and tested with
CoreSight on juno board, it works well.
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-4-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 783fed2f35 upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the intel_bts event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
intel_bts feature, but the code seems buggy same as arm-spe and
intel-pt.
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-3-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2da4dd3d69 upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be endless.
If the intel_pt event is disabled, we don't enable it again here.
Before the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 46803
^C^C^C^C^C^C
After the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 48591
^C[ perf record: Woken up 0 times to write data ]
Warning:
AUX data lost 504 times out of 4816!
[ perf record: Captured and wrote 2024.405 MB perf.data ]
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-2-adrian.hunter@intel.com
[ ahunter: removed redundant 'else' after 'return' ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b64208f74 ]
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50 ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e867c9a50 ]
After commit 71130f2997 ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533 ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8023b030c ]
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes: ba8d39871a ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c363eb48ad ]
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 604e2139a1 upstream.
When we moved zalloc.o to the library we missed gtk library which needs
it compiled in, otherwise the missing __zfree symbol will cause the
library to fail to load.
Adding the zalloc object to the gtk library build.
Fixes: 7f7c536f23 ("tools lib: Adopt zalloc()/zfree() from tools/perf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f7774033e upstream.
We need to set actions->ms.map since 599a2f38a9 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 599a2f38a9 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9167c8078 upstream.
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e404b8c7cf ]
After commit 2759647247 ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes: 2759647247 ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2e97dc126 upstream.
Fix following build error. We could push a tcp.h header into one of the
include paths, but I think its easy enough to simply pull in the three
defines we need here. If we end up using more of tcp.h at some point
we can pull it in later.
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’:
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function)
repair = TCP_REPAIR_ON;
^
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function)
repair = TCP_REPAIR_OFF_NO_WP;
Then with fix,
$ ./test_progs -n 44
#44/1 sockmap create_update_free:OK
#44/2 sockhash create_update_free:OK
#44 sockmap_basic:OK
Fixes: 5d3919a953 ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 414f50434a ]
Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51bad0f056 ]
Currently, there is a lot of false positives if a single reuseport test
fails. This is because expected_results and the result map are not cleared.
Zero both after individual test runs, which fixes the mentioned false
positives.
Fixes: 91134d849a ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b7e20a7ba ]
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.
Commit
12a78d43de ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).
Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.
Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.
HOSTCC arch/x86/tools/insn_decoder_test
HOSTCC arch/x86/tools/insn_sanity
TEST posttest
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx)
arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
TEST posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)
To fix this error, add the TEST opcode according to AMD64 APM Vol.3.
[ bp: Massage commit message. ]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8580bed7e7 ]
Building objtool with ARCH=x86_64 fails with:
$make ARCH=x86_64 -C tools/objtool
...
CC arch/x86/decode.o
arch/x86/decode.c:10:22: fatal error: asm/insn.h: No such file or directory
#include <asm/insn.h>
^
compilation terminated.
mv: cannot stat ‘arch/x86/.decode.o.tmp’: No such file or directory
make[2]: *** [arch/x86/decode.o] Error 1
...
The root cause is that the command-line variable 'ARCH' cannot be
overridden. It can be replaced by 'SRCARCH', which is defined in
'tools/scripts/Makefile.arch'.
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/d5d11370ae116df6c653493acd300ec3d7f5e925.1579543924.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 585c91f40d ]
Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool
build fails with new gcc -Werror=address-of-packed-member checks.
usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
79 | usbip_net_pack_uint32_t(pack, &udev->busnum);
Fix with minor changes to pass by value instead of by address.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6794200fa3 ]
GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:
error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]
This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.
There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1162f84403 ]
Currently, when bpftool cgroup show <path> has an error, no error
message is printed. This is confusing because the user may think the
result is empty.
Before the change:
$ bpftool cgroup show /sys/fs/cgroup
ID AttachType AttachFlags Name
$ echo $?
255
After the change:
$ ./bpftool cgroup show /sys/fs/cgroup
Error: can't query bpf programs attached to /sys/fs/cgroup: Operation
not permitted
v2: Rename check_query_cgroup_progs to cgroup_has_attached_progs
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191224011742.3714301-1-hechaol@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea6a547669 ]
The SO_TXTIME test depends on accurate timers. In some virtualized
environments the test has been reported to be flaky. This is easily
reproduced by disabling kvm acceleration in Qemu.
Allow greater variance in a run and retry to further reduce flakiness.
Observed errors are one of two kinds: either the packet arrives too
early or late at recv(), or it was dropped in the qdisc itself and the
recv() call times out.
In the latter case, the qdisc queues a notification to the error
queue of the send socket. Also explicitly report this cause.
Link: https://lore.kernel.org/netdev/CA+FuTSdYOnJCsGuj43xwV1jxvYsaoa_LzHQF9qMyhrkLrivxKw@mail.gmail.com
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac87813d43 ]
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") adds support for a new per-test-directory "settings"
file. But this only works for tests not in a sub-subdirectories, e.g.
- tools/testing/selftests/rtc (rtc) is OK,
- tools/testing/selftests/net/mptcp (net/mptcp) is not.
We have to increase the timeout for net/mptcp tests which are not
upstreamed yet but this fix is valid for other tests if they need to add
a "settings" file, see the full list with:
tools/testing/selftests/*/*/**/Makefile
Note that this patch changes the text header message printed at the end
of the execution but this text is modified only for the tests that are
in sub-subdirectories, e.g.
ok 1 selftests: net/mptcp: mptcp_connect.sh
Before we had:
ok 1 selftests: mptcp: mptcp_connect.sh
But showing the full target name is probably better, just in case a
subsubdir has the same name as another one in another subdirectory.
Fixes: 852c8cbf34 (selftests/kselftest/runner.sh: Add 45 second timeout per test)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b64a650f0 ]
It was observed[1] on arm64 that __builtin_strlen led to an infinite
loop in the get_size selftest. This is because __builtin_strlen (and
other builtins) may sometimes result in a call to the C library
function. The C library implementation of strlen uses an IFUNC
resolver to load the most efficient strlen implementation for the
underlying machine and hence has a PLT indirection even for static
binaries. Because this binary avoids the C library startup routines,
the PLT initialization never happens and hence the program gets stuck
in an infinite loop.
On x86_64 the __builtin_strlen just happens to expand inline and avoid
the call but that is not always guaranteed.
Further, while testing on x86_64 (Fedora 31), it was observed that the
test also failed with a segfault inside write() because the generated
code for the write function in glibc seems to access TLS before the
syscall (probably due to the cancellation point check) and fails
because TLS is not initialised.
To mitigate these problems, this patch reduces the interface with the
C library to just the syscall function. The syscall function still
sets errno on failure, which is undesirable but for now it only
affects cases where syscalls fail.
[1] https://bugs.linaro.org/show_bug.cgi?id=5479
Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 80cc7bb6c1 upstream.
For data collected on machines with front end stalled cycles supported,
such as found on modern AMD CPU families, commit 146540fb54 ("perf
stat: Always separate stalled cycles per insn") introduces a new line in
CSV output with a leading comma that upsets some automated scripts.
Scripts have to use "-e ex_ret_instr" to work around this issue, after
upgrading to a version of perf with that commit.
We could add "if (have_frontend_stalled && !config->csv_sep)" to the not
(total && avg) else clause, to emphasize that CSV users are usually
scripts, and are written to do only what is needed, i.e., they wouldn't
typically invoke "perf stat" without specifying an explicit event list.
But - let alone CSV output - why should users now tolerate a constant
0-reporting extra line in regular terminal output?:
BEFORE:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
181,110,981 instructions # 0.58 insn per cycle
# 0.00 stalled cycles per insn
309,876,469 cycles
1.002202582 seconds time elapsed
The user would not like to see the now permanent:
"0.00 stalled cycles per insn"
line fixture, as it gives no useful information.
So this patch removes the printing of the zeroed stalled cycles line
altogether, almost reverting the very original commit fb4605ba47
("perf stat: Check for frontend stalled for metrics"), which seems like
it was written to normalize --metric-only column output of common Intel
machines at the time: modern Intel machines have ceased to support the
genericised frontend stalled metrics AFAICT.
AFTER:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
244,071,432 instructions # 0.69 insn per cycle
355,353,490 cycles
1.001862516 seconds time elapsed
Output behaviour when stalled cycles is indeed measured is not affected
(BEFORE == AFTER):
$ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1
Performance counter stats for 'system wide':
247,227,799 instructions # 0.63 insn per cycle
# 0.26 stalled cycles per insn
394,745,636 cycles
63,194,485 stalled-cycles-frontend # 16.01% frontend cycles idle
1.002079770 seconds time elapsed
Fixes: 146540fb54 ("perf stat: Always separate stalled cycles per insn")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d3919a953 upstream.
Commit 7e81a35302 ("bpf: Sockmap, ensure sock lock held during tear
down") introduced sleeping issues inside RCU critical sections and while
holding a spinlock on sockmap/sockhash tear-down. There has to be at least
one socket in the map for the problem to surface.
This adds a test that triggers the warnings for broken locking rules. Not a
fix per se, but rather tooling to verify the accompanying fixes. Run on a
VM with 1 vCPU to reproduce the warnings.
Fixes: 7e81a35302 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d95f1e8b46 upstream.
Turns out the xlated program instructions can also be missing if
kptr_restrict sysctl is set. This means that the previous fix to check the
jited_prog_insns pointer was insufficient; add another check of the
xlated_prog_insns pointer as well.
Fixes: 5b79bcdf03 ("bpftool: Don't crash on missing jited insns or ksyms")
Fixes: cae73f2339 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SocName in DDR JSON file, so that metric/metricgroup can filter by this
property.
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
All metrics under one CPUID would be loaded by Perf tool when the CPUID
of SoC is matched. So users could see other platforms' metrics from one
platform, which is very confused. We can match metric/metricgroup with
SOCNAME if needed.
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Add socname for struct pmu_event for that we can distinguish different SoCs
by this property.
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[ Upstream commit eb573e746b ]
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
1.000208486
2.000368863
2.001400558
Similarly in skylake platform:
command:./perf stat --metric-only -M Power -I 1000
1.000579994
2.002189493
With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist. Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.
Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.
Example for single metric event in power9 platform:
command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1
1.000094653 0.2
1.001337059 0.0
This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.
With this patch:
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0
2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0
command:# ./perf stat --metric-only -M Power -I 1000
Similarly in skylake platform:
result:#
time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0
2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0
Committer testing:
Before:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time
1.000383223
2.001168182
3.001968545
4.002741200
5.003442022
^C 5.777687244
[root@seventh ~]#
After the patch:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0
2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0
3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0
4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0
5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0
^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0
[root@seventh ~]#
[root@seventh ~]# dmesg | grep -i skylake
[ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[root@seventh ~]#
Fixes: f01642e491 ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joakim cherry pick from upstream:
3635b27cc0 perf metricgroup: Fix printing event names of metric group with multiple events
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Currently when cross compiling perf tool for ARM64 on my x86 machine I
get this error:
arch/arm64/util/sym-handling.c:9:10: fatal error: gelf.h: No such file or directory
#include <gelf.h>
For the build, libelf is reported off:
Auto-detecting system features:
...
... libelf: [ OFF ]
Indeed, test-libelf is not built successfully:
more ./build/feature/test-libelf.make.output
test-libelf.c:2:10: fatal error: libelf.h: No such file or directory
#include <libelf.h>
^~~~~~~~~~
compilation terminated.
I have no such problems natively compiling on ARM64, and I did not
previously have this issue for cross compiling. Fix by relocating the
gelf.h include.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1573045254-39833-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joakim cherry pick from upstream:
1302caaef5 perf tools: Fix cross compile for ARM64
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
commit 5fcf3a55a6 upstream.
The filter name is fixed to "exit_reason" for some kvm_exit events, no
matter what architect we have. Actually, the filter name ("exit_reason")
is only applicable to x86, meaning it's broken on other architects
including aarch64.
This fixes the issue by providing various kvm_exit filter names, depending
on architect we're on. Afterwards, the variable filter name is picked and
applied through ioctl(fd, SET_FILTER).
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bec4f665e upstream.
The reuseport tests currently suffer from a race condition: FIN
packets count towards DROP_ERR_SKB_DATA, since they don't contain
a valid struct cmd. Tests will spuriously fail depending on whether
check_results is called before or after the FIN is processed.
Exit the BPF program early if FIN is set.
Fixes: 91134d849a ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-3-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c31dbb1e41 upstream.
Use a proper temporary file for sendpage tests. This means that running
the tests doesn't clutter the working directory, and allows running the
test on read-only filesystems.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-2-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1c3656c6d upstream.
The same with commit 4e59afbbed ("selftests/bpf: skip nmi test when perf
hw events are disabled"), it would make more sense to skip the
test_stacktrace_build_id_nmi test if the setup (e.g. virtual machines) has
disabled hardware perf events.
Fixes: 13790d1cc7 ("bpf: add selftest for stackmap with build_id in NMI context")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117100656.10359-1-liuhangbin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 580205dd4f upstream.
Fix two issues in test_attach_probe:
1. it was not able to parse /proc/self/maps beyond the first line,
since %s means parse string until white space.
2. offset has to be accounted for otherwise uprobed address is incorrect.
Fixes: 1e8611bbdf ("selftests/bpf: add kprobe/uprobe selftests")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191219020442.1922617-1-ast@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7145fcfffe upstream.
when the following command is done on a fresh clone of the kernel tree,
[root@f31 tc-testing]# ./tdc.py -c bpf
test cases that need to build the eBPF sample program fail systematically,
because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the
'khdr' target fails). Pass the correct environment to 'make', in place of
ENVIR, to allow running these tests.
Fixes: 4c2d39bd40 ("tc-testing: use a plugin to build eBPF program")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35b9211c0a upstream.
Fix bug requesting invalid size of reallocated array when constructing CO-RE
relocation candidate list. This can cause problems if there are many potential
candidates and a very fine-grained memory allocator bucket sizes are used.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: William Smith <williampsmith@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200124201847.212528-1-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41ddb7e1f7 upstream.
Commit ae2917093f ("tools/power/cpupower: Display boost frequency
separately") modified the library function:
struct cpufreq_available_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
to
struct cpufreq_frequencies
*cpufreq_get_frequencies(const char *type, unsigned int cpu)
This patch recovers the old API and implements the new functionality
in a newly introduce method:
struct cpufreq_boost_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
This one should get merged into stable kernels back to 5.0 when
the above had been introduced.
Fixes: ae2917093f ("tools/power/cpupower: Display boost frequency separately")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ec14aa7a5 upstream.
The sync-check.sh script prints out the path due to a "cd -" at the end
of the script, even on silent builds. This isn't even needed, since the
script is executed in our build instead of sourced (so it won't change
the working directory of the surrounding build anyway).
Just remove the cd to make the build silent.
Fixes: 2ffd84ae97 ("objtool: Update sync-check.sh from perf's check-headers.sh")
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/cb002857fafa8186cfb9c3e43fb62e4108a1bab9.1579543924.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3314a74f8 ]
Commit 800d3f5616 ("perf report: Add warning when libunwind not
compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for
call chain unwinding and had no support for libunwind.
So the warning "Please install libunwind development packages during the
perf build." caused the confusion even if the call-graph is displayed
correctly.
This patch adds checking for HAVE_DWARF_SUPPORT, which is set when
libdw-dwarf-unwind is compiled in.
Fixes: 800d3f5616 ("perf report: Add warning when libunwind not compiled in")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6c4798d3f0 upstream.
Disable a couple of compilation warnings (which are treated as errors)
on strlcpy() definition and declaration, allowing users to compile perf
and kernel (objtool) when:
1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and
perf build fails with this (in gcc):
In file included from exec-cmd.c:3:
tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls]
20 | extern size_t strlcpy(char *dest, const char *src, size_t size);
2. clang ignores `-Wredundant-decls', but produces another warning when
building perf:
CC util/string.o
../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
size_t __weak strlcpy(char *dest, const char *src, size_t size)
../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak'
# define __weak __attribute__((weak))
/usr/include/bits/string_fortified.h:151:8: note: previous definition is here
__NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,
Committer notes:
The
#pragma GCC diagnostic
directive was introduced in gcc 4.6, so check for that as well.
Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c")
Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__")
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Dmitry Levin <ldv@altlinux.org>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a53ba15d81 ]
Due to a quirky C syntax of declaring pointers to array or function
prototype, existing __type() macro doesn't work with map key/value types
that are array or function prototype. One has to create a typedef first
and use it to specify key/value type for a BPF map. By using typeof(),
pointer to type is now handled uniformly for all kinds of types. Convert
one of self-tests as a demonstration.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191004040211.2434033-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d671fa6393 ]
It is necessary to set fd to -1 when inotify_add_watch() fails in
cg_prepare_for_wait. Otherwise the fd which has been closed in
cg_prepare_for_wait may be misused in other functions such as
cg_enter_and_wait_for_frozen and cg_freeze_wait.
Fixes: 5313bfe425 ("selftests: cgroup: add freezer controller self-tests")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea1bf0bb18 ]
The default installation location for gen_kselftest_tar.sh was still
"kselftest/" which collides with the existing directory. Instead, this
moves the installation target into "kselftest_install/kselftest/" and
adjusts the tar creation accordingly. This also adjusts indentation and
logic to be consistent.
Fixes: 42d46e57ec ("selftests: Extract single-test shell logic from lib.mk")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a566e35f1e ]
u32 is a kernel-side typedef. User-space library is supposed to use __u32.
This breaks Github's projection of libbpf. Do u32 -> __u32 fix.
Fixes: 94ff9ebb49 ("libbpf: Fix compatibility for kernels without need_wakeup")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191029055953.2461336-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f068435d9b upstream.
At some point in the past we needed to make sure we would get the long
name of modules and not just what we get from /proc/modules, but that
need, as described in the cset that introduced the adjustment function:
Fixes: c03d5184f0 ("perf machine: Adjust dso->long_name for offline module")
Without using the buildid-cache:
# lsmod | grep trusted
# insmod trusted.ko
# lsmod | grep trusted
trusted 24576 0
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
probe:key_seal (on key_seal in trusted)
# perf probe -l
probe:key_seal (on key_seal in trusted)
#
No attempt at opening '[trusted]'.
Now using the build-id cache:
# rmmod trusted
# perf buildid-cache --add ./trusted.ko
# insmod trusted.ko
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
#
Again, no attempt at reading '[trusted]'.
Finally, adding a probe to that function and then using:
[root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2
0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263)
dso__adjust_kmod_long_name (/home/acme/bin/perf)
machine__process_kernel_mmap_event (/home/acme/bin/perf)
machine__process_mmap_event (/home/acme/bin/perf)
perf_event__process_mmap (/home/acme/bin/perf)
machines__deliver_event (/home/acme/bin/perf)
perf_session__deliver_event (/home/acme/bin/perf)
perf_session__process_event (/home/acme/bin/perf)
process_simple (/home/acme/bin/perf)
reader__process_events (/home/acme/bin/perf)
__perf_session__process_events (/home/acme/bin/perf)
perf_session__process_events (/home/acme/bin/perf)
process_buildids (/home/acme/bin/perf)
record__finish_output (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263)
dso__adjust_kmod_long_name (/home/acme/bin/perf)
machine__process_kernel_mmap_event (/home/acme/bin/perf)
machine__process_mmap_event (/home/acme/bin/perf)
perf_event__process_mmap (/home/acme/bin/perf)
machines__deliver_event (/home/acme/bin/perf)
perf_session__deliver_event (/home/acme/bin/perf)
perf_session__process_event (/home/acme/bin/perf)
process_simple (/home/acme/bin/perf)
reader__process_events (/home/acme/bin/perf)
__perf_session__process_events (/home/acme/bin/perf)
perf_session__process_events (/home/acme/bin/perf)
process_buildids (/home/acme/bin/perf)
record__finish_output (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
#
This was the only path I could find using the perf tools that reach at this
function, then as of november/2019, if we put a probe in the line where the
actuall setting of the dso->long_name is done:
# perf trace -e probe_perf:*
^C[root@quaco ~]
# perf stat -e probe_perf:* -I 2000
2.000404265 0 probe_perf:dso__adjust_kmod_long_name
4.001142200 0 probe_perf:dso__adjust_kmod_long_name
6.001704120 0 probe_perf:dso__adjust_kmod_long_name
8.002398316 0 probe_perf:dso__adjust_kmod_long_name
10.002984010 0 probe_perf:dso__adjust_kmod_long_name
12.003597851 0 probe_perf:dso__adjust_kmod_long_name
14.004113303 0 probe_perf:dso__adjust_kmod_long_name
16.004582773 0 probe_perf:dso__adjust_kmod_long_name
18.005176373 0 probe_perf:dso__adjust_kmod_long_name
20.005801605 0 probe_perf:dso__adjust_kmod_long_name
22.006467540 0 probe_perf:dso__adjust_kmod_long_name
^C 23.683261941 0 probe_perf:dso__adjust_kmod_long_name
#
Its not being used at all.
To further test this I used kvm.ko as the offline module, i.e. removed
if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and
moved it from the normal kernel distro path, removed the modules, stoped
the kvm guest, and then installed it manually, etc.
# rmmod kvm-intel
# rmmod kvm
# lsmod | grep kvm
# modprobe kvm-intel
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg)
# insmod ./kvm.ko
# modprobe kvm-intel
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
# lsmod | grep kvm
kvm_intel 299008 0
kvm 765952 1 kvm_intel
irqbypass 16384 1 kvm
#
# perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string'
# perf probe -l
probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name)
# perf record
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ]
# perf trace -e probe_perf:machine*
<SNIP>
6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]")
6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]")
<SNIP>
The filename doesn't come with the path, no point in trying to set the dso->long_name.
[root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm'
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
[root@quaco ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 994021a7e0 upstream.
Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.
Fixes: 69eaab04c6 ("btf: extract BTF type size calculation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dc5e05982 upstream.
Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94ff9ebb49 upstream.
When the need_wakeup flag was added to AF_XDP, the format of the
XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the
kernel to take care of compatibility issues arrising from running
applications using any of the two formats. However, libbpf was
not extended to take care of the case when the application/libbpf
uses the new format but the kernel only supports the old
format. This patch adds support in libbpf for parsing the old
format, before the need_wakeup flag was added, and emulating a
set of static need_wakeup flags that will always work for the
application.
v2 -> v3:
* Incorporated code improvements suggested by Jonathan Lemon
v1 -> v2:
* Rebased to bpf-next
* Rewrote the code as the previous version made you blind
Fixes: a4500432c2 ("libbpf: add support for need_wakeup flag in AF_XDP part")
Reported-by: Eloy Degen <degeneloy@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3509b6ed7 ]
My earlier patch to just enable --reltime with --time was a little too
optimistic. The --time parsing would accept absolute time, which is
very confusing to the user.
Support relative time in --time parsing too. This only works with recent
perf record that records the first sample time. Otherwise we error out.
Fixes: 3714437d3f ("perf script: Allow --time with --reltime")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191011182140.8353-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3714437d3f upstream.
The original --reltime patch forbid --time with --reltime.
But it turns out --time doesn't really care about --reltime, because the
relative time is only used at final output, while the time filtering
always works earlier on absolute time.
So just remove the check and allow combining the two options.
Fixes: 90b10f47c0 ("perf script: Support relative time")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07d3698578 upstream.
Since there are some DIE which has only ranges instead of the
combination of entrypc/highpc, address verification must use
dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc.
Also, the ranges only DIE will have a partial code in different section
(e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In
that case, we can not use dwarf_entrypc() or die_entrypc(), because the
offset from original DIE can be a minus value.
Instead, this simply gets the symbol and offset from symtab.
Without this patch;
# perf probe -D clear_tasks_mm_cpumask:1
Failed to get entry address of clear_tasks_mm_cpumask
Error: Failed to add events.
And with this patch:
# perf probe -D clear_tasks_mm_cpumask:1
p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0
p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5
p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8
p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16
p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82
Committer testing:
I managed to reproduce the above:
[root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1
p:probe/clear_tasks_mm_cpumask _text+919968
p:probe/clear_tasks_mm_cpumask_1 _text+919973
p:probe/clear_tasks_mm_cpumask_2 _text+919976
[root@quaco ~]#
But then when trying to actually put the probe in place, it fails if I
use :0 as the offset:
[root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5
<clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0>
0 void clear_tasks_mm_cpumask(int cpu)
1 {
2 struct task_struct *p;
[root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
Probe point 'clear_tasks_mm_cpumask' not found.
Error: Failed to add events.
[root@quaco
The next patch is needed to fix this case.
Fixes: 576b523721 ("perf probe: Fix probing symbols with optimization suffix")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fef6d67049 upstream.
Mausezahn does not recognize "own" as a keyword on source IP address. As a
result, the MC stream is not running at all, and therefore no UC
degradation can be observed even in principle.
Fix the invocation, and tighten the test: due to the minimum shaper
configured at the MC TCs, we always expect about 20% degradation. Fail the
test if it is lower.
Fixes: 573363a68f ("selftests: mlxsw: Add qos_lib.sh")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 555089fdfc upstream.
For plain text output, it incorrectly prints the pointer value
"void *data". The "void *data" is actually pointing to memory that
contains a bpf-map's value. The intention is to print the content of
the bpf-map's value instead of printing the pointer pointing to the
bpf-map's value.
In this case, a member of the bpf-map's value is a pointer type.
Thus, it should print the "*(void **)data".
Fixes: 22c349e8db ("tools: bpftool: fix format strings and arguments for jsonw_printf()")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0feba17bd7 upstream.
We observed an issue that was some extra columns displayed after switching
perf data file in browser. The steps to reproduce:
1. perf record -a -e cycles,instructions -- sleep 3
2. perf report --group
3. In browser, we use hotkey 's' to switch to another perf.data
4. Now in browser, the extra columns 'Self' and 'Children' are displayed.
The issue is setup_sorting() executed again after repeat path, so dimensions
are added again.
This patch checks the last key returned from __cmd_report(). If it's
K_SWITCH_INPUT_DATA, skips the setup_sorting().
Fixes: ad0de0971b ("perf report: Enable the runtime switching of perf data file")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55347ec340 upstream.
Variable names are inconsistent in hists__for_each macro().
Due to this inconsistency, the macro replaces its second argument with
"fmt" regardless of its original name.
So far it works because only "fmt" is passed to the second argument.
However, this behavior is not expected and should be fixed.
Fixes: f0786af536 ("perf hists: Introduce hists__for_each_format macro")
Fixes: aa6f50af82 ("perf hists: Introduce hists__for_each_sort_list macro")
Signed-off-by: Yuya Fujita <fujita.yuya@fujitsu.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit af9cb29c54 ]
As the rseq selftests can run for a long period of time, disable the
timeout that the general selftests have.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c65e41538b ]
firmware attempts to load test modules that require root access
and fail. Fix it to check for root uid and exit with skip code
instead.
Before this fix:
selftests: firmware: fw_run_tests.sh
modprobe: ERROR: could not insert 'test_firmware': Operation not permitted
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP
With this fix:
selftests: firmware: fw_run_tests.sh
skip all tests: must be run as root
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviwed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3c379a59b4 upstream.
We should close fd before the return of run_test.
Fixes: 3f2ed81348 ("tools: PCI: Add a userspace tool to test PCI endpoint")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58b3bafff8 upstream.
In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from
the description for L1D_RO_EXCL_WRITES, but the extra name remained in
the description. Remove it too.
Fixes: 7fcfa9a2d9 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES")
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc7e3f63d7 upstream.
The loopback feature is only supported on a few drivers like broadcom,
mellanox, etc. The default veth driver has not supported it yet. To avoid
returning failed and making the runner feel confused, let's just skip
the test on drivers that not support loopback.
Fixes: ad11340994 ("selftests: Add loopback test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 152044775d ]
There is no a_r3, a_r4 in the testing topology.
It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500.
Fixes: e44e428f59 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eac734486 ]
On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error
message:
Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10.
This commit fixes the error by explicitly specifying the use of the
`IO::Handle` package.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d187801d1a ]
If a timeout failure occurs, kselftest kills the test process and prints
the timeout log. If the test process has killed while printing a log
that ends with new line, the timeout log can be printed in middle of the
test process output so that it can be seems like a comment, as below:
# test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT
This commit avoids such problem by printing one more line before the
TIMEOUT failure log.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2870782687 ]
Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.
However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:
cpu level shared_cpu_list size
0 1 0 32K
0 1 0 64K
0 2 0 512K
0 3 0 8192K
1 1 1 32K
1 1 1 64K
1 2 1 512K
1 3 1 8192K
This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".
v2: Removing unused argument.
v3: Unifying the way we obtain number of cpus.
v4: Removed '& UINT_MAX' construct which is redundant.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb573e746b ]
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
1.000208486
2.000368863
2.001400558
Similarly in skylake platform:
command:./perf stat --metric-only -M Power -I 1000
1.000579994
2.002189493
With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist. Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.
Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.
Example for single metric event in power9 platform:
command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1
1.000094653 0.2
1.001337059 0.0
This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.
With this patch:
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0
2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0
command:# ./perf stat --metric-only -M Power -I 1000
Similarly in skylake platform:
result:#
time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0
2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0
Committer testing:
Before:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time
1.000383223
2.001168182
3.001968545
4.002741200
5.003442022
^C 5.777687244
[root@seventh ~]#
After the patch:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0
2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0
3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0
4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0
5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0
^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0
[root@seventh ~]#
[root@seventh ~]# dmesg | grep -i skylake
[ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[root@seventh ~]#
Fixes: f01642e491 ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b79bcdf03 ]
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Fixes: f84192ee00 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ef1ec0ca3 ]
Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.
Without this fix, I got following error.
----
TAP version 13
1..1
# selftests: safesetid: run_tests.sh
# Warning: file run_tests.sh is missing!
not ok 1 selftests: safesetid: run_tests.sh
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 295c4e21cf ]
Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.
safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(child_uid);
^~~~~~~~~~~~~~~~~
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be12252212 ]
Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.
Without this, safesetid failed to build with link error
as below.
----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cc6c8d4a9 ]
Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
- Since `wc -l FILE` returns not only line number but also
FILE filename, following "if" statement always failed.
Fix this bug by replacing it with 'cat FILE | wc -l'
- Since "while do-done loop" block with pipeline becomes a
subshell, $N local variable is not update outside of
the loop.
Fix this bug by using actual target number (256) instead
of $N.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1b9c5048 ]
Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25deae098e ]
Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.
Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1baf6ca2 ]
If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2e6af818 ]
Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.
Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15b3904f8e ]
When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 587db8ebda ]
When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:
INSTALL /home/sudip/linux/obj-trace/libtraceevent.a
INSTALL /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0
cp: cannot stat 'libtraceevent.a': No such file or directory
Makefile:225: recipe for target 'install_lib' failed
make: *** [install_lib] Error 1
I used the command:
make O=../../../obj-trace DESTDIR=~/test prefix==/usr install
It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.
So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8df34c5632 upstream.
glibc 2.30 introduces gettid() in public headers, which clashes with
the internal static definition within rseq selftests.
Rename gettid() to rseq_gettid() to eliminate this symbol name clash.
Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4ab5ccc35 upstream.
This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88c13f8bd7 upstream.
The seccomp_notif structure should be zeroed out prior to calling the
SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check
whether these structures were zeroed out or not, so these worked.
This patch zeroes out the seccomp_notif data structure prior to calling
the ioctl.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX8MP DDR Perf JSON file only give the LSB 5 bits, also need point
out the MSB 3 bits for each master. This patch corrects the master ID
and makes some masters name more readable.
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[ Upstream commit 746dd4012d ]
When running test_vmalloc.sh smoke the following print out states that
the fragment is missing.
# ./test_vmalloc.sh: You must have the following enabled in your kernel:
# CONFIG_TEST_VMALLOC=m
Rework to add the fragment 'CONFIG_TEST_VMALLOC=m' to the config file.
Link: http://lkml.kernel.org/r/20190916095217.19665-1-anders.roxell@linaro.org
Fixes: a05ef00c97 ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b596e0ff0 ]
To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.
Detected in a container mipsel debian cross build environment, where it
shows up as:
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
Also on mips64:
In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_user__printf' at util/session.c:1139:3,
inlined from 'dump_sample' at util/session.c:1246:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_intr__printf' at util/session.c:1147:3,
inlined from 'dump_sample' at util/session.c:1249:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909
Fixes: 2bcd355b71 ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cd032d3b5 ]
brstackinsn must be allowed to be set by the user when AUX area data has
been captured because, in that case, the branch stack might be
synthesized on the fly. This fixes the following error:
Before:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
Display of branch stack assembler requested, but non all-branch filter set
Hint: run 'perf record -b ...'
After:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep)
bmexec+2485:
00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED
00005641d5806bd0 movzxb (%r13,%rdx,1), %eax
00005641d5806bd6 add %rdi, %rax
00005641d5806bd9 movzxb -0x1(%rax), %edx
00005641d5806bdd cmp %rax, %r14
00005641d5806be0 jnb 0x5641d58069c0 # MISPRED
mismatch of LBR data and executable
00005641d58069c0 movzxb (%r13,%rdx,1), %edi
Fixes: 48d02a1d5c ("perf script: Add 'brstackinsn' for branch stacks")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191127095322.15417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98e9324511 ]
To fix these build errors on a debian mipsel cross build environment:
builtin-diff.c: In function 'block_cycles_diff_cmp':
builtin-diff.c:550:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
550 | l = labs(left->diff.cycles);
| ^~~~
builtin-diff.c:551:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
551 | r = labs(right->diff.cycles);
| ^~~~
Fixes: 99150a1faa ("perf diff: Use hists to manage basic blocks per symbol")
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20183ccd3e ]
It is possible that certain config levels are not available, even
if the max level includes the level. There can be missing levels in
some platforms. So ignore the level when called for information dump
for all levels and fail if specifically ask for the missing level.
Here the changes is to continue reading information about other levels
even if we fail to get information for the current level. But use the
"processed" flag to indicate the failure. When the "processed" flag is
not set, don't dump information about that level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505127068d ]
On systems where TM (Transactional Memory) is disabled the
tm-signal-sigreturn-nt test causes a SIGILL:
test: tm_signal_sigreturn_nt
tags: git_version:7c202575ef63
!! child died by signal 4
failure: tm_signal_sigreturn_nt
We should skip the test if TM is not available.
Fixes: 34642d70ac ("selftests/powerpc: Add checks for transactional sigreturn")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104233524.24348-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a02cbc7ffe ]
Some of our TM (Transactional Memory) tests, list "r1" (the stack
pointer) as a clobbered register.
GCC >= 9 doesn't accept this, and the build breaks:
ptrace-tm-spd-tar.c: In function 'tm_spd_tar':
ptrace-tm-spd-tar.c:31:2: error: listing the stack pointer register 'r1' in a clobber list is deprecated [-Werror=deprecated]
31 | asm __volatile__(
| ^~~
ptrace-tm-spd-tar.c:31:2: note: the value of the stack pointer after an 'asm' statement must be the same as it was before the statement
We do have some fairly large inline asm blocks in these tests, and
some of them do change the value of r1. However they should all return
to C with the value in r1 restored, so I think it's legitimate to say
r1 is not clobbered.
As Segher points out, the r1 clobbers may have been added because of
the use of `or 1,1,1`, however that doesn't actually clobber r1.
Segher also points out that some of these tests do clobber LR, because
they call functions, and that is not listed in the clobbers, so add
that where appropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191029095324.14669-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd504b0fd ]
This test only works when [1] is applied, which was rejected.
Basically, the errors are reported and cleared. In this particular case of
tls sockets, following reads will block.
The test case was originally submitted with the rejected patch, but, then,
was included as part of a different patchset, possibly by mistake.
[1] https://lore.kernel.org/netdev/20191007035323.4360-2-jakub.kicinski@netronome.com/#t
Thanks Paolo Pisati for pointing out the original patchset where this
appeared.
Fixes: 65190f7742 (selftests/tls: add a test for fragmented messages)
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a89b2cbf71 ]
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit
55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine
srctree"). However, by updating $(srctree) in tools/bpf/Makefile for
in-tree builds only, we leave out the case where we pass an output
directory to build BPF tools, but $(srctree) is not set. This
typically happens for:
$ make -s tools/bpf O=/tmp/foo
Makefile:40: /tools/build/Makefile.feature: No such file or directory
Fix it by updating $(srctree) in the Makefile not only for out-of-tree
builds, but also if $(srctree) is empty.
Detected with test_bpftool_build.sh.
Fixes: 55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine srctree")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10992af6bf ]
It is necessary to free the memory that we have allocated when error occurs.
Fixes: ef3072cd1d ("tools lib traceevent: Get rid of die in add_filter_type()")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 91e2f539ee upstream.
Fix die_walk_lines() to list the function entry line correctly. Since
the dwarf_entrypc() does not return the entry pc if the DIE has only
range attribute, __die_walk_funclines() fails to list the declaration
line (entry line) in that case.
To solve this issue, this introduces die_entrypc() which correctly
returns the entry PC (the first address range) even if the DIE has only
range attribute. With this fix die_walk_lines() shows the function entry
line is able to probe correctly.
Fixes: 4cc9cec636 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb1835a3b8 ]
Avoid termination of trace loading in case the last record in the
decompressed buffer partly resides in the following mmaped
PERF_RECORD_COMPRESSED record.
In this case NULL value returned by fetch_mmaped_event() means to
proceed to the next mmaped record then decompress it and load compressed
events.
The issue can be reproduced like this:
$ perf record -z -- some_long_running_workload
$ perf report --stdio -vv
decomp (B): 44519 to 163000
decomp (B): 48119 to 174800
decomp (B): 65527 to 131072
fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data?
Error:
failed to process sample
...
Testing:
71: Zstd perf.data compression/decompression : Ok
$ tools/perf/perf report -vv --stdio
decomp (B): 59593 to 262160
decomp (B): 4438 to 16512
decomp (B): 285 to 880
Looking at the vmlinux_path (8 entries long)
Using vmlinux for symbols
decomp (B): 57474 to 261248
prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data?
decomp (B): 25 to 32
decomp (B): 52 to 120
...
Fixes: 57fc032ad6 ("perf session: Avoid infinite loop when seeing invalid header.size")
Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de88c9113 ]
Drivers use different fields to report the number of channels, so take
the maximum of all data channels (rx, tx, combined) when determining the
size of the xsk map. The current code used only 'combined' which was set
to 0 in some drivers e.g. mlx4.
Tested: compiled and run xdpsock -q 3 -r -S on mlx4
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191119001951.92930-1-lrizzo@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ea2612b98 ]
Currently, with latest llvm trunk, selftest test_progs failed obj
file test_seg6_loop.o with the following error in verifier:
infinite loop detected at insn 76
The byte code sequence looks like below, and noted that alu32 has been
turned off by default for better generated codes in general:
48: w3 = 100
49: *(u32 *)(r10 - 68) = r3
...
; if (tlv.type == SR6_TLV_PADDING) {
76: if w3 == 5 goto -18 <LBB0_19>
...
85: r1 = *(u32 *)(r10 - 68)
; for (int i = 0; i < 100; i++) {
86: w1 += -1
87: if w1 == 0 goto +5 <LBB0_20>
88: *(u32 *)(r10 - 68) = r1
The main reason for verification failure is due to partial spills at
r10 - 68 for induction variable "i".
Current verifier only handles spills with 8-byte values. The above 4-byte
value spill to stack is treated to STACK_MISC and its content is not
saved. For the above example:
w3 = 100
R3_w=inv100 fp-64_w=inv1086626730498
*(u32 *)(r10 - 68) = r3
R3_w=inv100 fp-64_w=inv1086626730498
...
r1 = *(u32 *)(r10 - 68)
R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
fp-64=inv1086626730498
To resolve this issue, verifier needs to be extended to track sub-registers
in spilling, or llvm needs to enhanced to prevent sub-register spilling
in register allocation phase. The former will increase verifier complexity
and the latter will need some llvm "hacking".
Let us workaround this issue by declaring the induction variable as "long"
type so spilling will happen at non sub-register level. We can revisit this
later if sub-register spilling causes similar or other verification issues.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191117214036.1309510-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b054b7133 ]
When run_kselftests.sh is run, it hangs after test_tc_tunnel.sh. The reason
is test_tc_tunnel.sh ensures the server ('nc -l') is run all the time,
starting it again every time it is expected to terminate. The exception is
the final client_connect: the server is not started anymore, which ensures
no process is kept running after the test is finished.
For a sit test, though, the script is terminated prematurely without the
final client_connect and the 'nc' process keeps running. This in turn causes
the run_one function in kselftest/runner.sh to hang forever, waiting for the
runaway process to finish.
Ensure a remaining server is terminated on cleanup.
Fixes: f6ad6accaa ("selftests/bpf: expand test_tc_tunnel with SIT encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/60919291657a9ee89c708d8aababc28ebe1420be.1573821780.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7a0d65d80 ]
With latest llvm compiler, running test_progs will have the following
verifier failure for test_sysctl_loop1.o:
libbpf: load bpf program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
invalid indirect read from stack var_off (0x0; 0xff)+196 size 7
...
libbpf: -- END LOG --
libbpf: failed to load program 'cgroup/sysctl'
libbpf: failed to load object 'test_sysctl_loop1.o'
The related bytecode looks as below:
0000000000000308 LBB0_8:
97: r4 = r10
98: r4 += -288
99: r4 += r7
100: w8 &= 255
101: r1 = r10
102: r1 += -488
103: r1 += r8
104: r2 = 7
105: r3 = 0
106: call 106
107: w1 = w0
108: w1 += -1
109: if w1 > 6 goto -24 <LBB0_5>
110: w0 += w8
111: r7 += 8
112: w8 = w0
113: if r7 != 224 goto -17 <LBB0_8>
And source code:
for (i = 0; i < ARRAY_SIZE(tcp_mem); ++i) {
ret = bpf_strtoul(value + off, MAX_ULONG_STR_LEN, 0,
tcp_mem + i);
if (ret <= 0 || ret > MAX_ULONG_STR_LEN)
return 0;
off += ret & MAX_ULONG_STR_LEN;
}
Current verifier is not able to conclude that register w0 before '+'
at insn 110 has a range of 1 to 7 and thinks it is from 0 - 255. This
leads to more conservative range for w8 at insn 112, and later verifier
complaint.
Let us workaround this issue until we found a compiler and/or verifier
solution. The workaround in this patch is to make variable 'ret' volatile,
which will force a reload and then '&' operation to ensure better value
range. With this patch, I got the below byte code for the loop:
0000000000000328 LBB0_9:
101: r4 = r10
102: r4 += -288
103: r4 += r7
104: w8 &= 255
105: r1 = r10
106: r1 += -488
107: r1 += r8
108: r2 = 7
109: r3 = 0
110: call 106
111: *(u32 *)(r10 - 64) = r0
112: r1 = *(u32 *)(r10 - 64)
113: if w1 s< 1 goto -28 <LBB0_5>
114: r1 = *(u32 *)(r10 - 64)
115: if w1 s> 7 goto -30 <LBB0_5>
116: r1 = *(u32 *)(r10 - 64)
117: w1 &= 7
118: w1 += w8
119: r7 += 8
120: w8 = w1
121: if r7 != 224 goto -21 <LBB0_9>
Insn 117 did the '&' operation and we got more precise value range
for 'w8' at insn 120. The test is happy then:
#3/17 test_sysctl_loop1.o:OK
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191107170045.2503480-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 670cd6849e ]
Fix printf format warnings on arm (and other 32bit arch).
- udpgso.c and udpgso_bench_tx use %lu for size_t but it
should be unsigned long long on 32bit arch.
- so_txtime.c uses %ld for int64_t, but it should be
unsigned long long on 32bit arch.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3571ea71 ]
Currently proc-self-map-files-002.c sets va_max (max test address
of user virtual address) to 4GB, but it is too big for 32bit
arch and 1UL << 32 is overflow on 32bit long.
Also since this value should be enough bigger than vm.mmap_min_addr
(64KB or 32KB by default), 1MB should be enough.
Make va_max 1MB unconditionally.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9656b346b2 ]
Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.
Fixes: 10a13bb40e ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107054059.313884-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da6cb952a8 ]
Filter out instances except for inlined_subroutine and subprogram DIE in
die_walk_instances() and die_is_func_instance().
This fixes an issue that perf probe sets some probes on calling address
instead of a target function itself.
When perf probe walks on instances of an abstruct origin (a kind of
function prototype of inlined function), die_walk_instances() can also
pass a GNU_call_site (a GNU extension for call site) to callback. Since
it is not an inlined instance of target function, we have to filter out
when searching a probe point.
Without this patch, perf probe sets probes on call site address too.This
can happen on some function which is marked "inlined", but has actual
symbol. (I'm not sure why GCC mark it "inlined"):
# perf probe -D vfs_read
p:probe/vfs_read _text+2500017
p:probe/vfs_read_1 _text+2499468
p:probe/vfs_read_2 _text+2499563
p:probe/vfs_read_3 _text+2498876
p:probe/vfs_read_4 _text+2498512
p:probe/vfs_read_5 _text+2498627
With this patch:
Slightly different results, similar tho:
# perf probe -D vfs_read
p:probe/vfs_read _text+2498512
Committer testing:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Before:
# perf probe -D vfs_read
p:probe/vfs_read _text+3131557
p:probe/vfs_read_1 _text+3130975
p:probe/vfs_read_2 _text+3131047
p:probe/vfs_read_3 _text+3130380
p:probe/vfs_read_4 _text+3130000
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
After:
# perf probe -D vfs_read
p:probe/vfs_read _text+3130000
#
Fixes: db0d2c6420 ("perf probe: Search concrete out-of-line instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937063.32002.11024544873990816590.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d99bdfd1 ]
Skip end-of-sequence and non-statement lines while walking through lines
list.
The "end-of-sequence" line information means:
"the current address is that of the first byte after the
end of a sequence of target machine instructions."
(DWARF version 4 spec 6.2.2)
This actually means out of scope and we can not probe on it.
On the other hand, the statement lines (is_stmt) means:
"the current instruction is a recommended breakpoint location.
A recommended breakpoint location is intended to “represent”
a line, a statement and/or a semantically distinct subpart
of a statement."
(DWARF version 4 spec 6.2.2)
So, non-statement line info also should be skipped.
These can reduce unneeded probe points and also avoid an error.
E.g. without this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1
#
This puts 5 probes on one line, but acutally it's not inlined function.
This is because there are many non statement instructions at the
function prologue.
With this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
#
Now perf-probe skips unneeded addresses.
Committer testing:
Slightly different results, but similar:
Before:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1
#
After:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
#
Fixes: 4cc9cec636 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86c0bf8539 ]
Fix to show calling lines of inlined functions (where an inline function
is called).
die_walk_lines() filtered out the lines inside inlined functions based
on the address. However this also filtered out the lines which call
those inlined functions from the target function.
To solve this issue, check the call_file and call_line attributes and do
not filter out if it matches to the line information.
Without this fix, perf probe -L doesn't show some lines correctly.
(don't see the lines after 17)
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
fsnotify_access(file);
add_rchar(current, ret);
}
With this fix:
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
17 fsnotify_access(file);
18 add_rchar(current, ret);
}
20 inc_syscr(current);
}
Fixes: 4cc9cec636 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937995.32002.17899884017011512577.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c701636aee ]
Make find_best_scope() returns innermost DIE at given address if there
is no best matched scope DIE. Since Gcc sometimes generates intuitively
strange line info which is out of inlined function address range, we
need this fixup.
Without this, sometimes perf probe failed to probe on a line inside an
inlined function:
# perf probe -D ksys_open:3
Failed to find scope of probe point.
Error: Failed to add events.
With this fix, 'perf probe' can probe it:
# perf probe -D ksys_open:3
p:probe/ksys_open _text+25707308
p:probe/ksys_open_1 _text+25710596
p:probe/ksys_open_2 _text+25711114
p:probe/ksys_open_3 _text+25711343
p:probe/ksys_open_4 _text+25714058
p:probe/ksys_open_5 _text+2819653
p:probe/ksys_open_6 _text+2819701
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157291300887.19771.14936015360963292236.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dee36a2abb ]
Since debuginfo__find_probes() callback function can be called with the
location which already passed, the callback function must filter out
such overlapped locations.
add_probe_trace_event() has already done it by commit 1a375ae765
("perf probe: Skip same probe address for a given line"), but
add_available_vars() doesn't. Thus perf probe -v shows same address
repeatedly as below:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
With this fix, perf probe -V shows it correctly:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
Fixes: cf6eb489e5 ("perf probe: Show accessible local variables")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241938927.32002.4026859017790562751.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f2c4226e ]
Avoid a memory leak when the configuration fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e8714c3d1 ]
If event parsing fails the event list is leaked, instead splice the list
onto the out result and let the caller cleanup.
An example input for parse_events found by libFuzzer that reproduces
this memory leak is 'm{'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191025180827.191916-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71f699078b ]
Currently when cross compiling perf tool for ARM64 on my x86 machine I
get this error:
arch/arm64/util/sym-handling.c:9:10: fatal error: gelf.h: No such file or directory
#include <gelf.h>
For the build, libelf is reported off:
Auto-detecting system features:
...
... libelf: [ OFF ]
Indeed, test-libelf is not built successfully:
more ./build/feature/test-libelf.make.output
test-libelf.c:2:10: fatal error: libelf.h: No such file or directory
#include <libelf.h>
^~~~~~~~~~
compilation terminated.
I have no such problems natively compiling on ARM64, and I did not
previously have this issue for cross compiling. Fix by relocating the
gelf.h include.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1573045254-39833-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d16dbcc31 ]
Fix 'perf probe' to probe a function which has no entry pc or low pc but
only has ranges attribute.
probe_point_search_cb() uses dwarf_entrypc() to get the probe address,
but that doesn't work for the function DIE which has only ranges
attribute. Use die_entrypc() instead.
Without this fix:
# perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0
Probe point 'clear_tasks_mm_cpumask' not found.
Error: Failed to add events.
With this:
# perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0
p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0
Committer testing:
Before:
[root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
Probe point 'clear_tasks_mm_cpumask' not found.
Error: Failed to add events.
[root@quaco ~]#
After:
[root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
[root@quaco ~]#
Using it with 'perf trace':
[root@quaco ~]# perf trace -e probe:clear_tasks_mm_cpumask
Doesn't seem to be used in x86_64:
$ find . -name "*.c" | xargs grep clear_tasks_mm_cpumask
./kernel/cpu.c: * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
./kernel/cpu.c:void clear_tasks_mm_cpumask(int cpu)
./arch/xtensa/kernel/smp.c: clear_tasks_mm_cpumask(cpu);
./arch/csky/kernel/smp.c: clear_tasks_mm_cpumask(cpu);
./arch/sh/kernel/smp.c: clear_tasks_mm_cpumask(cpu);
./arch/arm/kernel/smp.c: clear_tasks_mm_cpumask(cpu);
./arch/powerpc/mm/nohash/mmu_context.c: clear_tasks_mm_cpumask(cpu);
$ find . -name "*.h" | xargs grep clear_tasks_mm_cpumask
./include/linux/cpu.h:void clear_tasks_mm_cpumask(int cpu);
$ find . -name "*.S" | xargs grep clear_tasks_mm_cpumask
$
Fixes: e1ecbbc3fa ("perf probe: Fix to handle optimized not-inlined functions")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199319438.8075.4695576954550638618.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22bd8f1b5a ]
When a 'make DEBUG=1' build is done, the command parser is still built
with -O6 and is hard to step through, fix it making it use -O0 in that
case.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: nd <nd@arm.com>
Link: http://lore.kernel.org/lkml/20191028113340.4282-1-james.clark@arm.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af04dd2f8e ]
Fix to show ranges of variables (--range and --vars option) in functions
which DIE has only ranges but no entry_pc attribute.
Without this fix:
# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
(No matched variables)
With this fix:
# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
[VAL] int cpu @<clear_tasks_mm_cpumask+[0-35,317-317,2052-2059]>
Committer testing:
Before:
[root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
(No matched variables)
[root@quaco ~]#
After:
[root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
[VAL] int cpu @<clear_tasks_mm_cpumask+[0-23,23-105,105-106,106-106,1843-1850,1850-1862]>
[root@quaco ~]#
Using it:
[root@quaco ~]# perf probe clear_tasks_mm_cpumask cpu
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask with cpu)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
[root@quaco ~]# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c with cpu)
[root@quaco ~]#
[root@quaco ~]# perf trace -e probe:*cpumask
^C[root@quaco ~]#
Fixes: 349e8d2611 ("perf probe: Add --range option to show a variable's location range")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199323018.8075.8179744380479673672.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb6933b29d ]
Fix perf probe to probe an inlne function which has no entry pc
or low pc but only has ranges attribute.
This seems very rare case, but I could find a few examples, as
same as probe_point_search_cb(), use die_entrypc() to get the
entry address in probe_point_inline_cb() too.
Without this patch:
# perf probe -D __amd_put_nb_event_constraints
Failed to get entry address of __amd_put_nb_event_constraints.
Probe point '__amd_put_nb_event_constraints' not found.
Error: Failed to add events.
With this patch:
# perf probe -D __amd_put_nb_event_constraints
p:probe/__amd_put_nb_event_constraints amd_put_event_constraints+43
Committer testing:
Before:
[root@quaco ~]# perf probe -D __amd_put_nb_event_constraints
Failed to get entry address of __amd_put_nb_event_constraints.
Probe point '__amd_put_nb_event_constraints' not found.
Error: Failed to add events.
[root@quaco ~]#
After:
[root@quaco ~]# perf probe -D __amd_put_nb_event_constraints
p:probe/__amd_put_nb_event_constraints _text+33789
[root@quaco ~]#
Fixes: 4ea42b1814 ("perf: Add perf probe subcommand, a kprobe-event setup helper")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199320336.8075.16189530425277588587.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acb6a7047a ]
Since some inlined functions are in lexical blocks of given function, we
have to recursively walk through the DIE tree. Without this fix,
perf-probe -L can miss the inlined functions which is in a lexical block
(like if (..) { func() } case.)
However, even though, to walk the lines in a given function, we don't
need to follow the children DIE of inlined functions because those do
not have any lines in the specified function.
We need to walk though whole trees only if we walk all lines in a given
file, because an inlined function can include another inlined function
in the same file.
Fixes: b0e9cb2802 ("perf probe: Fix to search nested inlined functions in CU")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190836514.1859.15996864849678136353.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1785fbb738 ]
There are memory leaks and file descriptor resource leaks in
process_mapfile() and main().
Fix this by adding free(), fclose() and free_arch_std_events() on the
error paths.
Fixes: 80eeb67fe5 ("perf jevents: Program to convert JSON file")
Fixes: 3f056b6664 ("perf jevents: Make build fail on JSON parse error")
Fixes: e9d32c1bf0 ("perf vendor events: Add support for arch standard events")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Luke Mujica <lukemujica@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Link: http://lore.kernel.org/lkml/d7907042-ec9c-2bef-25b4-810e14602f89@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3895534dd7 ]
Since debuginfo__find_probe_point() uses dwarf_entrypc() for finding the
entry address of the function on which a probe is, it will fail when the
function DIE has only ranges attribute.
To fix this issue, use die_entrypc() instead of dwarf_entrypc().
Without this fix, perf probe -l shows incorrect offset:
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579263632@work/linux/linux/kernel/cpu.c)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask+18446744071579263752@work/linux/linux/kernel/cpu.c)
With this:
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@work/linux/linux/kernel/cpu.c)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:21@work/linux/linux/kernel/cpu.c)
Committer testing:
Before:
[root@quaco ~]# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579765152@kernel/cpu.c)
[root@quaco ~]#
After:
[root@quaco ~]# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
[root@quaco ~]#
Fixes: 1d46ea2a6a ("perf probe: Fix listing incorrect line number with inline function")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199321227.8075.14655572419136993015.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d604aad4b ]
Macro TO_CS_QUEUE_NR definition has a typo, which uses 'trace_id_chan'
as its parameter, this doesn't match with its definition body which uses
'trace_chan_id'. So renames the parameter to 'trace_chan_id'.
It's luck to have a local variable 'trace_chan_id' in the function
cs_etm__setup_queue(), even we wrongly define the macro TO_CS_QUEUE_NR,
the local variable 'trace_chan_id' is used rather than the macro's
parameter 'trace_id_chan'; so the compiler doesn't complain for this
before.
After renaming the parameter, it leads to a compiling error due
cs_etm__setup_queue() has no variable 'trace_id_chan'. This patch uses
the variable 'trace_chan_id' for the macro so that fixes the compiling
error.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20191021074808.25795-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b77afa1f81 ]
Fix die_is_func_instance() to find range-only function instance.
In some case, a function instance can be made without any low PC or
entry PC, but only with address ranges by optimization. (e.g. cold text
partially in "text.unlikely" section) To find such function instance, we
have to check the range attribute too.
Fixes: e1ecbbc3fa ("perf probe: Fix to handle optimized not-inlined functions")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190835669.1859.8368628035930950596.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1b4574a4b ]
bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a50dcaf04 ]
The new check_zeroed_user() function uses variable shifts inside of a
user_access_begin()/user_access_end() section and that results in GCC
emitting __ubsan_handle_shift_out_of_bounds() calls, even though
through value range analysis it would be able to see that the UB in
question is impossible.
Annotate and whitelist this UBSAN function; continued use of
user_access_begin()/user_access_end() will undoubtedly result in
further uses of function.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cyphar@cyphar.com
Cc: keescook@chromium.org
Cc: linux@rasmusvillemoes.dk
Fixes: f5a1a536fa ("lib: introduce copy_struct_from_user() helper")
Link: https://lkml.kernel.org/r/20191021131149.GA19358@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f90415e960 ]
test_progs never created a copy of subtest name, rather just stored
pointer to whatever string test provided. This is bad as that string
might be freed or modified by the end of subtest. Fix this by creating
a copy of given subtest name when subtest starts.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-6-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a5f3d94cb ]
As there are several discussions for enabling perf breakpoint signal
testing on arm64 platform: arm64 needs to rely on single-step to execute
the breakpointed instruction and then reinstall the breakpoint exception
handler. But if we hook the breakpoint with a signal, the signal
handler will do the stepping rather than the breakpointed instruction,
this causes infinite loops as below:
Kernel space | Userspace
---------------------------------|--------------------------------
| __test_function() -> hit
| breakpoint
breakpoint_handler() |
`-> user_enable_single_step() |
do_signal() |
| sig_handler() -> Step one
| instruction and
| trap to kernel
single_step_handler() |
`-> reinstall_suspended_bps() |
| __test_function() -> hit
| breakpoint again and
| repeat up flow infinitely
As Will Deacon mentioned [1]: "that we require the overflow handler to
do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The
hw_breakpoint code is a complete disaster so my preference would be to
rip out the perf part and just implement something directly in ptrace,
but it's a pretty horrible job". Though Will commented this on arm
architecture, but the comment also can apply on arm64 architecture.
For complete information, I searched online and found a few years back,
Wang Nan sent one patch 'arm64: Store breakpoint single step state into
pstate' [2]; the patch tried to resolve this issue by avoiding single
stepping in signal handler and defer to enable the signal stepping when
return to __test_function(). The fixing was not merged due to the
concern for missing to handle different usage cases.
Based on the info, the most feasible way is to skip Perf breakpoint
signal testing for arm64 and this could avoid the duplicate
investigation efforts when people see the failure. This patch skips
this case on arm64 platform, which is same with arm architecture.
[1] https://lkml.org/lkml/2018/11/15/205
[2] https://lkml.org/lkml/2015/12/23/477
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20191018085531.6348-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b0975f48 ]
The "EventName" for the DDRC precharge command event is incorrect, so
fix it.
Fixes: 57cc732479 ("perf jevents: Add support for Hisi hip08 DDRC PMU aliasing")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1567612484-195727-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 791ce9c48c ]
When executing the task exit testing case, perf gets stuck in an endless
loop this case and doesn't return back on Arm64 Juno board.
After digging into this issue, since Juno board has Arm's big.LITTLE
CPUs, thus the PMUs are not compatible between the big CPUs and little
CPUs. This leads to a PMU event that cannot be enabled properly when
the traced task is migrated from one variant's CPU to another variant.
Finally, the test case runs into infinite loop for cannot read out any
event data after return from polling.
Eventually, we need to work out formal solution to allow PMU events can
be freely migrated from one CPU variant to another, but this is a
difficult task and a different topic. This patch tries to fix the Perf
test case to avoid infinite loop, when the testing detects 1000 times
retrying for reading empty events, it will directly bail out and return
failure. This allows the Perf tool can continue its other test cases.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 800d3f5616 ]
We received a user report that call-graph DWARF mode was enabled in
'perf record' but 'perf report' didn't unwind the callstack correctly.
The reason was, libunwind was not compiled in.
We can use 'perf -vv' to check the compiled libraries but it would be
valuable to report a warning to user directly (especially valuable for
a perf newbie).
The warning is:
Warning:
Please install libunwind development packages during the perf build.
Both TUI and stdio are supported.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6add129c5d ]
When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.
This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.
Fixes: d723a55096 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25bfef430e ]
'struct xdp_umem_reg' has 4 bytes of padding at the end that makes
valgrind complain about passing uninitialized stack memory to the
syscall:
Syscall param socketcall.setsockopt() points to uninitialised byte(s)
at 0x4E7AB7E: setsockopt (in /usr/lib64/libc-2.29.so)
by 0x4BDE035: xsk_umem__create@@LIBBPF_0.0.4 (xsk.c:172)
Uninitialised value was created by a stack allocation
at 0x4BDDEBA: xsk_umem__create@@LIBBPF_0.0.4 (xsk.c:140)
Padding bytes appeared after introducing of a new 'flags' field.
memset() is required to clear them.
Fixes: 10d30e3017 ("libbpf: add flags to umem config")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191009164929.17242-1-i.maximets@ovn.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4099769f3 ]
Fix a case where explicit padding at the end of a struct is necessary
due to non-standart alignment requirements of fields (which BTF doesn't
capture explicitly).
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191008231009.2991130-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76790c7c66 ]
Existing padding test case for btf_dump has a good test that was
supposed to test padding generation at the end of a struct, but its
expected output was specified incorrectly. Fix this.
Fixes: 2d2a3ad872 ("selftests/bpf: add btf_dump BTF-to-C conversion tests")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191008231009.2991130-4-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daebf24a8e ]
Currently the Linux Kernel Memory Model gives an incorrect response
for the following litmus test:
C plain-WWC
{}
P0(int *x)
{
WRITE_ONCE(*x, 2);
}
P1(int *x, int *y)
{
int r1;
int r2;
int r3;
r1 = READ_ONCE(*x);
if (r1 == 2) {
smp_rmb();
r2 = *x;
}
smp_rmb();
r3 = READ_ONCE(*x);
WRITE_ONCE(*y, r3 - 1);
}
P2(int *x, int *y)
{
int r4;
r4 = READ_ONCE(*y);
if (r4 > 0)
WRITE_ONCE(*x, 1);
}
exists (x=2 /\ 1:r2=2 /\ 2:r4=1)
The memory model says that the plain read of *x in P1 races with the
WRITE_ONCE(*x) in P2.
The problem is that we have a write W and a read R related by neither
fre or rfe, but rather W ->coe W' ->rfe R, where W' is an intermediate
write (the WRITE_ONCE() in P0). In this situation there is no
particular ordering between W and R, so either a wr-vis link from W to
R or an rw-xbstar link from R to W would prove that the accesses
aren't concurrent.
But the LKMM only looks for a wr-vis link, which is equivalent to
assuming that W must execute before R. This is not necessarily true
on non-multicopy-atomic systems, as the WWC pattern demonstrates.
This patch changes the LKMM to accept either a wr-vis or a reverse
rw-xbstar link as a proof of non-concurrency.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c588146378 ]
The "path" buf is supposed to contain path + printf msg up to 24 bytes.
It will be cut anyway, but compiler generates truncation warns like:
"
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c: In
function ‘setup_cgroup_environment’:
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:34:
warning: ‘/cgroup.controllers’ directive output may be truncated
writing 19 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:2:
note: ‘snprintf’ output between 20 and 4116 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:34:
warning: ‘/cgroup.subtree_control’ directive output may be truncated
writing 23 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
^~~~~~~~~~~~~~~~~~~~~~~
cgroup_path);
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:2:
note: ‘snprintf’ output between 24 and 4120 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
cgroup_path);
"
In order to avoid warns, lets decrease buf size for cgroup workdir on
24 bytes with assumption to include also "/cgroup.subtree_control" to
the address. The cut will never happen anyway.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191002120404.26962-3-ivan.khoronzhuk@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e5705c635 ]
When building cpupower with clang, the following warning appears:
utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
prior initialization of this subobject [-Winitializer-overrides]
.desc = N_("Processor Package C2"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
is here
.desc = N_("Processor Package C9"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
1 warning generated.
This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.
Fixes: 7ee767b69b ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65cb139862 ]
When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:
$ ./router_bridge_vlan.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
Fix this by deleting the address during cleanup.
Fixes: 5b1e7f9ebd ("selftests: forwarding: Test routed bridge interface")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a5cdc604b ]
ENOTSUPP is not available in userspace, for example:
setsockopt failed, 524, Unknown error 524
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 223e660bc7 upstream.
USER_NOTIF_MAGIC is assigned to int variables in this test so set it to INT_MAX
to avoid warnings:
seccomp_bpf.c: In function ‘user_notification_continue’:
seccomp_bpf.c:3088:26: warning: overflow in implicit constant conversion [-Woverflow]
#define USER_NOTIF_MAGIC 116983961184613L
^
seccomp_bpf.c:3572:15: note: in expansion of macro ‘USER_NOTIF_MAGIC’
resp.error = USER_NOTIF_MAGIC;
^~~~~~~~~~~~~~~~
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: stable@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20190920083007.11475-3-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af8490eb2b upstream.
The test case 'Read backward ring buffer' failed on 32-bit architectures
which were found by LKFT perf testing. The test failed on arm32 x15
device, qemu_arm32, qemu_i386, and found intermittent failure on i386;
the failure log is as below:
50: Read backward ring buffer :
--- start ---
test child forked, pid 510
Using CPUID GenuineIntel-6-9E-9
mmap size 1052672B
mmap size 8192B
Finished reading overwrite ring buffer: rewind
free(): invalid next size (fast)
test child interrupted
---- end ----
Read backward ring buffer: FAILED!
The log hints there have issue for memory usage, thus free() reports
error 'invalid next size' and directly exit for the case. Finally, this
issue is root caused as out of bounds memory access for the data array
'evsel->id'.
The backward ring buffer test invokes do_test() twice. 'evsel->id' is
allocated at the first call with the flow:
test__backward_ring_buffer()
`-> do_test()
`-> evlist__mmap()
`-> evlist__mmap_ex()
`-> perf_evsel__alloc_id()
So 'evsel->id' is allocated with one item, and it will be used in
function perf_evlist__id_add():
evsel->id[0] = id
evsel->ids = 1
At the second call for do_test(), it skips to initialize 'evsel->id'
and reuses the array which is allocated in the first call. But
'evsel->ids' contains the stale value. Thus:
evsel->id[1] = id -> out of bound access
evsel->ids = 2
To fix this issue, we will use evlist__open() and evlist__close() pair
functions to prepare and cleanup context for evlist; so 'evsel->id' and
'evsel->ids' can be initialized properly when invoke do_test() and avoid
the out of bounds memory access.
Fixes: ee74701ed8 ("perf tests: Add test to check backward ring buffer")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.10+
Link: http://lore.kernel.org/lkml/20191107020244.2427-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=8yzT
-----END PGP SIGNATURE-----
Merge linux-5.4.y tag 'v5.4.3' into lf-5.4.y
This is the 5.4.3 stable release
Conflicts:
drivers/cpufreq/imx-cpufreq-dt.c
drivers/spi/spi-fsl-qspi.c
The conflict is very minor, fixed it when do the merge. The imx-cpufreq-dt.c
is just one line code-style change, using upstream one, no any function change.
The spi-fsl-qspi.c has minor conflicts when merge upstream fixes: c69b17da53
spi: spi-fsl-qspi: Clear TDH bits in FLSHCR register
After merge, basic boot sanity test and basic qspi test been done on i.mx
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
[ Upstream commit 02bf1f8b3c ]
As per commit 131b30c94f ("kselftest: exclude failed TARGETS from
runlist") failed targets were excluded from the runlist. But value
$$INSTALL_PATH is always NULL. It should be $INSTALL_PATH instead
$$INSTALL_PATH.
So, fix Makefile to use $INSTALL_PATH.
Fixes: 131b30c94f ("kselftest: exclude failed TARGETS from runlist")
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit af833988c0 upstream.
Prior to version 3.23 SQLite does not support TRUE or FALSE, so always
use 1 and 0 for SQLite.
Fixes: 26c11206f4 ("perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.3+
Link: http://lore.kernel.org/lkml/20191113120206.26957-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: backported to v5.3, v5.4]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2745aea675 ]
Some versions of iproute2 will output more than one line per entry, which
will cause the test to fail, like:
TEST: ipv6: list and flush cached exceptions [FAIL]
can't list cached exceptions
That happens, for example, with iproute2 4.15.0. When using the -oneline
option, this will work just fine:
TEST: ipv6: list and flush cached exceptions [ OK ]
This also works just fine with a more recent version of iproute2, like
5.4.0.
For some reason, two lines are printed for the IPv4 test no matter what
version of iproute2 is used. Use the same -oneline parameter there instead
of counting the lines twice.
Fixes: b964641e99 ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5dc9dd325 ]
perror(str) is basically equivalent to
print("%s: %s\n", str, strerror(errno)).
New line or colon at the end of str is
a mistake/breaks formatting.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b67c51503 ]
test_sockmap creates a temporary file to use for sendpage.
this may fail for various reasons. Handle the error rather
than segfault.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65190f7742 ]
Add a sendmsg test with very fragmented messages. This should
fill up sk_msg and test the boundary conditions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26a4d4c00f upstream.
We should close the fd before the return of read_attr_usbip_status.
Fixes: 3391ba0e27 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191025043515.20053-1-hewenliang4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d2fa82d98 upstream.
If the kernel accidentally uses DS or ES while the user values are
loaded, it will work fine for sane userspace. In the interest of
simulating maximally insane userspace, make sigreturn_32 zero out DS
and ES for the nasty parts so that inadvertent use of these segments
will crash.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8caa016bfc upstream.
For reasons that I haven't quite fully diagnosed, running
mov_ss_trap_32 on a 32-bit kernel results in an infinite loop in
userspace. This appears to be because the hacky SYSENTER test
doesn't segfault as desired; instead it corrupts the program state
such that it infinite loops.
Fix it by explicitly clearing EBP before doing SYSENTER. This will
give a more reliable segfault.
Fixes: 59c2a7226f ("x86/selftests: Add mov_to_ss test")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 700c1018b8 upstream.
gawk 5.0.1 generates the following regexp warnings:
GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c
awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator
awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator
Ealier versions of gawk are not known to generate these warnings. The
gawk manual referenced below does not list characters ':' and '&' as
needing escaping, so 'unescape' them. See
https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html
for more info.
Running diff on the output generated by the script before and after
applying the patch reported no differences.
[ bp: Massage commit message. ]
[ Caught the respective tools header discrepancy. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add JSON metrics for i.MX8 DDR perf.
Below command used for metric:
--------------------------------------------------------------
root@imx8qmmek:~# perf list metricgroup
List of pre-defined events (to be used in -e):
Metric Groups:
i.MX8MM_DDR_MON
i.MX8MP_DDR_MON
i.MX8QM_DDR_MON
--------------------------------------------------------------
root@imx8qmmek:~# perf list metric
List of pre-defined events (to be used in -e):
Metrics:
imx8mm-ddr0-2d-r
[imx8mm: bursts of gpu 2d read from ddr0]
imx8mm-ddr0-2d-w
[imx8mm: bursts of gpu 2d write to ddr0]
imx8mm-ddr0-3d-r
[imx8mm: bursts of gpu 3d read from ddr0]
imx8mm-ddr0-3d-w
[imx8mm: bursts of gpu 3d write to ddr0]
imx8mm-ddr0-a53-r
[imx8mm: bursts of a53 core read from ddr0]
imx8mm-ddr0-a53-w
[imx8mm: bursts of a53 core write to ddr0]
imx8mm-ddr0-all-r
[imx8mm: bytes of all masters read from ddr0]
imx8mm-ddr0-all-w
[imx8mm: bytes of all masters write to ddr0]
------------------------------------------------------------
root@imx8qmmek:~# perf stat -a -M imx8mm-ddr0-2d-r sleep 1
Performance counter stats for 'system wide':
0 imx8_ddr0/axid-read,axi_mask=0x0001,axi_id=0x0004/ # 0.0 imx8mm-ddr0-2d-r
1.012773375 seconds time elapsed
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
If we want to add/print metricgroup, we need get pmu evets map via CPUID
string, so it is important to get CPUID string. Now in metricgroup, it
passes NULL to perf_pmu__find_map(), will never get the pmu events map on
ARM64 platforms, due to get_cpuid_str() implement for ARM64 depending on the
cpu info of PMU. The CPUID string will not be same on all CPUs on heterogeneous
platforms, adding provision(using pmu->cpus) to find cpuid string from
associated CPUs of PMU.
The implement of get_cpuid_str() for ARM64 has taken heterogeneous platforms
into consideration, but metricgroup has not. So it is necessory to add
heterogeneous support for metricgroup. When we want to add/print metricgroup,
need iterator each PMU then pass the perf_pmu struct to perf_pmu__find_map().
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
- Fix debounce delays on the MAX77620 GPIO expander
- Use the correct unit for debounce times on the BD70528 GPIO expander
- Get proper deps for parallel builds of the GPIO tools
- Add a specific ACPI quirk for the Terra Pad 1061
-----BEGIN PGP SIGNATURE-----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=+VQr
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A last set of small fixes for GPIO, this cycle was quite busy.
- Fix debounce delays on the MAX77620 GPIO expander
- Use the correct unit for debounce times on the BD70528 GPIO expander
- Get proper deps for parallel builds of the GPIO tools
- Add a specific ACPI quirk for the Terra Pad 1061"
* tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist
tools: gpio: Correctly add make dependencies for gpio_utils
gpio: bd70528: Use correct unit for debounce times
gpio: max77620: Fixup debounce delays
Pull networking fixes from David Miller:
1) Fix memory leak in xfrm_state code, from Steffen Klassert.
2) Fix races between devlink reload operations and device
setup/cleanup, from Jiri Pirko.
3) Null deref in NFC code, from Stephan Gerhold.
4) Refcount fixes in SMC, from Ursula Braun.
5) Memory leak in slcan open error paths, from Jouni Hogander.
6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
7) Info leak on short USB request answers in ax88172a driver, from
Oliver Neukum.
8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
9) PTP config timestamp flags validation, from Richard Cochran.
10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
ipmr: Fix skb headroom in ipmr_get_route().
net: hns3: cleanup of stray struct hns3_link_mode_mapping
net/smc: fix fastopen for non-blocking connect()
rds: ib: update WR sizes when bringing up connection
net: gemini: add missed free_netdev
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
seg6: fix skb transport_header after decap_and_validate()
seg6: fix srh pointer in get_srh()
net: stmmac: Use the correct style for SPDX License Identifier
octeontx2-af: Use the correct style for SPDX License Identifier
ptp: Extend the test program to check the external time stamp flags.
mlx5: Reject requests to enable time stamping on both edges.
igb: Reject requests that fail to enable time stamping on both edges.
dp83640: Reject requests to enable time stamping on both edges.
mv88e6xxx: Reject requests to enable time stamping on both edges.
ptp: Introduce strict checking of external time stamp options.
renesas: reject unsupported external timestamp flags
mlx5: reject unsupported external timestamp flags
igb: reject unsupported external timestamp flags
dp83640: reject unsupported external timestamp flags
...
Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw does not support VXLAN devices with a physical device attached and
vetoes such configurations upon enslavement to an offloaded bridge.
Commit 0ce1822c2a ("vxlan: add adjacent link to limit depth level")
changed the VXLAN device to be an upper of the physical device which
causes mlxsw to veto the creation of the VXLAN device with "Unknown
upper device type".
This is OK as this configuration is not supported, but it prevents us
from testing bad flows involving the enslavement of VXLAN devices with a
physical device to a bridge, regardless if the physical device is an
mlxsw netdev or not.
Adjust the test to use a dummy device as a physical device instead of a
mlxsw netdev.
Fixes: 0ce1822c2a ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gpio tools fail to build correctly with make parallelization:
$ make -s -j24
ld: gpio-utils.o: file not recognized: file truncated
make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1
make: *** [Makefile:43: lsgpio-in.o] Error 2
make: *** Waiting for unfinished jobs....
This is because gpio-utils.o is used across multiple targets.
Fix this by making gpio-utios.o a proper dependency.
Cc: <stable@vger.kernel.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Pull perf tooling fixes from Thomas Gleixner:
- Fix the time sorting algorithm which was broken due to truncation of
big numbers
- Fix the python script generator fail caused by a broken tracepoint
array iterator
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix time sorting
perf tools: Remove unused trace_find_next_event()
perf scripting engines: Iterate on tep event arrays directly
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Add a test which spawns 16 threads and performs concurrent
send and recv calls on the same socket.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge more fixes from Andrew Morton:
"17 fixes"
Mostly mm fixes and one ocfs2 locking fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
mm/memory_hotplug: fix updating the node span
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
MAINTAINERS: update information for "MEMORY MANAGEMENT"
dump_stack: avoid the livelock of the dump_lock
zswap: add Vitaly to the maintainers list
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
mm, vmstat: hide /proc/pagetypeinfo from normal users
mm/mmu_notifiers: use the right return code for WARN_ON
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
mm: thp: handle page cache THP correctly in PageTransCompoundMap
mm, meminit: recalculate pcpu batch and high limits after init completes
mm/gup_benchmark: fix MAP_HUGETLB case
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
The MAP_HUGETLB ("-H" option) of gup_benchmark fails:
$ sudo ./gup_benchmark -H
mmap: Invalid argument
This is because gup_benchmark.c is passing in a file descriptor to
mmap(), but the fd came from opening up the /dev/zero file. This
confuses the mmap syscall implementation, which thinks that, if the
caller did not specify MAP_ANONYMOUS, then the file must be a huge page
file. So it attempts to verify that the file really is a huge page
file, as you can see here:
ksys_mmap_pgoff()
{
if (!(flags & MAP_ANONYMOUS)) {
retval = -EINVAL;
if (unlikely(flags & MAP_HUGETLB && !is_file_hugepages(file)))
goto out_fput; /* THIS IS WHERE WE END UP */
else if (flags & MAP_HUGETLB) {
...proceed normally, /dev/zero is ok here...
...and of course is_file_hugepages() returns "false" for the /dev/zero
file.
The problem is that the user space program, gup_benchmark.c, really just
wants anonymous memory here. The simplest way to get that is to pass
MAP_ANONYMOUS whenever MAP_HUGETLB is specified, so that's what this
patch does.
Link: http://lkml.kernel.org/r/20191021212435.398153-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-02
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 6 day(s) which contain
a total of 8 files changed, 35 insertions(+), 9 deletions(-).
The main changes are:
1) Fix ppc BPF JIT's tail call implementation by performing a second pass
to gather a stable JIT context before opcode emission, from Eric Dumazet.
2) Fix build of BPF samples sys_perf_event_open() usage to compiled out
unavailable test_attr__{enabled,open} checks. Also fix potential overflows
in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel.
3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian
archs like s390x and also improve the test coverage, from Ilya Leoshkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a build error in the tools used for kselftest.
- A series of reverts to bring the Intel Merrifield back to
working. We will likely unrevert the reverts for v5.5
but we can't have v5.4 broken.
-----BEGIN PGP SIGNATURE-----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=ml6d
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"More GPIO fixes! We found a late regression in the Intel Merrifield
driver. Oh well. We fixed it up.
- Fix a build error in the tools used for kselftest
- A series of reverts to bring the Intel Merrifield back to working.
We will likely unrevert the reverts for v5.5 but we can't have v5.4
broken"
* tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: merrifield: Pass irqchip when adding gpiochip"
Revert "gpio: merrifield: Restore use of irq_base"
Revert "gpio: merrifield: Move hardware initialization to callback"
tools: gpio: Use !building_out_of_srctree to determine srctree
The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.
Check the following report for longer workloads:
$ perf report -s time -F time,overhead --stdio
Fix hist_entry__sort() to properly return int64_t and not possible cut
int.
Fixes: 043ca389a3 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trace_find_next_event() was buggy and pretty much a useless helper. As
there are no more users, just remove it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191017210636.224045576@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of calling a useless (and broken) helper function to get the
next event of a tep event array, just get the array directly and iterate
over it.
Note, the broken part was from trace_find_next_event() which after this
will no longer be used, and can be removed.
Committer notes:
This fixes a segfault when generating python scripts from perf.data
files with multiple tracepoint events, i.e. the following use case is
fixed by this patch:
# perf record -e sched:* sleep 1
[ perf record: Woken up 31 times to write data ]
[ perf record: Captured and wrote 0.031 MB perf.data (9 samples) ]
# perf script -g python
Segmentation fault (core dumped)
#
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20191017153733.630cd5eb@gandalf.local.home
Link: http://lore.kernel.org/lkml/20191017210636.061448713@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The USB sub-maintainers woke up this past week and sent a bunch of tiny
fixes. Here are a lot of small patches that that resolve a bunch of
reported issues in the USB core, drivers, serial drivers, gadget
drivers, and of course, xhci :)
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXb7SXg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylCyQCgleuRSWwpH3QVRvCXpT/kxqXPkEQAn0ct2ZOi
oInjMIDpRJ+EuEithFOI
=P61y
-----END PGP SIGNATURE-----
Merge tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"The USB sub-maintainers woke up this past week and sent a bunch of
tiny fixes. Here are a lot of small patches that that resolve a bunch
of reported issues in the USB core, drivers, serial drivers, gadget
drivers, and of course, xhci :)
All of these have been in linux-next with no reported issues"
* tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host
usb: cdns3: gadget: reset EP_CLAIMED flag while unloading
USB: serial: whiteheat: fix line-speed endianness
USB: serial: whiteheat: fix potential slab corruption
USB: gadget: Reject endpoints with 0 maxpacket value
UAS: Revert commit 3ae62a4209 ("UAS: fix alignment of scatter/gather segments")
usb-storage: Revert commit 747668dbc0 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
usbip: Fix free of unallocated memory in vhci tx
usbip: tools: Fix read_usb_vudc_device() error path handling
usb: xhci: fix __le32/__le64 accessors in debugfs code
usb: xhci: fix Immediate Data Transfer endianness
xhci: Fix use-after-free regression in xhci clear hub TT implementation
USB: ldusb: fix control-message timeout
USB: ldusb: use unsigned size format specifiers
USB: ldusb: fix ring-buffer locking
USB: Skip endpoints with 0 maxpacket length
usb: cdns3: gadget: Don't manage pullups
usb: dwc3: remove the call trace of USBx_GFLADJ
usb: gadget: configfs: fix concurrent issue between composite APIs
...
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.
Note that we can't use os.access() because the script requires
root.
Fixes: 4418f862d6 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes: d6a61f80b8 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For users of perf-sys.h outside perf, e.g. samples/bpf/bpf_load.c, it's
convenient not to depend on test_attr__*.
After commit 91854f9a07 ("perf tools: Move everything related to
sys_perf_event_open() to perf-sys.h"), all users of perf-sys.h will
depend on test_attr__enabled and test_attr__open.
This commit enables a user to define HAVE_ATTR_TEST to zero in order
to omit the test dependency.
Fixes: 91854f9a07 ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lore.kernel.org/bpf/20191001113307.27796-2-bjorn.topel@gmail.com
"ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it
reads the wrong byte, which happens to have the expected value of 0.
Improve the test by seeking to the 4th byte and expecting 4 instead of
0.
This makes the latent problem apparent: the test attempts to read the
first byte of bpf_sysctl.file_pos, assuming this is the least-significant
byte, which is not the case on big-endian machines: a non-zero offset is
needed.
The point of the test is to verify narrow loads, so we cannot cheat our
way out by simply using BPF_W. The existence of the test means that such
loads have to be supported, most likely because llvm can generate them.
Fix the test by adding a big-endian variant, which uses an offset to
access the least-significant byte of bpf_sysctl.file_pos.
This reveals the final problem: verifier rejects accesses to bpf_sysctl
fields with offset > 0. Such accesses are already allowed for a wide
range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few.
Extend this support to bpf_sysctl by using bpf_ctx_range instead of
offsetof when matching field offsets.
Fixes: 7b146cebe3 ("bpf: Sysctl hook")
Fixes: e1550bfe0d ("bpf: Add file_pos field to bpf_sysctl ctx")
Fixes: 9a1027e525 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
This isn't really accurate right. fread() doesn't always
return 0 in error. It could return < number of elements
and set errno.
Signed-off-by: GwanYeong Kim <gy741.kim@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191018032223.4644-1-gy741.kim@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
kernel:
- Unbreak the tracking of auxiliary buffer allocations which got
imbalanced causing recource limit failures.
- Fix the fallout of splitting of ToPA entries which missed to shift
the base entry PA correctly.
- Use the correct context to lookup the AUX event when unmapping the
associated AUX buffer so the event can be stopped and the buffer
reference dropped.
tools:
- Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
/proc/kcore
- Fix freeing id arrays in the event list so the correct event is
closed.
- Sync sched.h anc kvm.h headers with the kernel sources.
- Link jvmti against tools/lib/ctype.o to have weak strlcpy().
- Fix multiple memory and file descriptor leaks, found by coverity in
perf annotate.
- Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
by a static analysis tool"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX output stopping
perf/aux: Fix tracking of auxiliary trace buffer allocation
perf/x86/intel/pt: Fix base for single entry topa
perf kmem: Fix memory leak in compact_gfp_flags()
tools headers UAPI: Sync sched.h with the kernel
tools headers kvm: Sync kvm.h headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
perf c2c: Fix memory leak in build_cl_output()
perf tools: Fix mode setting in copyfile_mode_ns()
perf annotate: Fix multiple memory and file descriptor leaks
perf tools: Fix resource leak of closedir() on the error paths
perf evlist: Fix fix for freed id arrays
perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
Daniel Borkmann says:
====================
pull-request: bpf 2019-10-27
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 11 day(s) which contain
a total of 7 files changed, 66 insertions(+), 16 deletions(-).
The main changes are:
1) Fix two use-after-free bugs in relation to RCU in jited symbol exposure to
kallsyms, from Daniel Borkmann.
2) Fix NULL pointer dereference in AF_XDP rx-only sockets, from Magnus Karlsson.
3) Fix hang in netdev unregister for hash based devmap as well as another overflow
bug on 32 bit archs in memlock cost calculation, from Toke Høiland-Jørgensen.
4) Fix wrong memory access in LWT BPF programs on reroute due to invalid dst.
Also fix BPF selftests to use more compatible nc options, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds two more tests to ipv4_addr_metric_test() to
explicitly cover the scenarios fixed by the previous patch.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel test robot reported that the l2tp.sh test script failed:
# selftests: net: l2tp.sh
# Warning: file l2tp.sh is not executable, correct this.
Set executable bits.
Fixes: e858ef1cd4 ("selftests: Add l2tp tests")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
make TARGETS=gpio kselftest fails with:
Makefile:23: tools/build/Makefile.include: No such file or directory
When the gpio tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/gpio Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=gpio kselftest" build failure.
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit 204c91eff7 ("KVM: selftests: do not blindly clobber registers in
guest asm") was intended to make test more gcc-proof, however, the result
is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with
==== Test Assertion Failure ====
x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1
pid=14170 tid=14170 - Invalid argument
1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6)
2 0x00007f413fb66412: ?? ??:0
3 0x000000000040191d: _start at ??:?
rbx sync regs value incorrect 0x1.
Apparently, compile is still free to play games with registers even
when they have variables attached.
Re-write guest code with 'asm volatile' by embedding ucall there and
making sure rbx is preserved.
Fixes: 204c91eff7 ("KVM: selftests: do not blindly clobber registers in guest asm")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX
specific. Bail early when nested VMX is unsupported.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_* tests require VMX and three of them implement the same check. Move it
to vmx library.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_set_nested_state_test() checks if VMX is supported twice: in the very
beginning (and skips the whole test if it's not) and before doing
test_vmx_nested_state(). One should be enough.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
Even though gup_benchmark.c has code to handle the -w command-line option,
the "w" is not part of the getopt string. It looks as if it has been
missing the whole time.
On my machine, this leads naturally to the following predictable result:
$ sudo ./gup_benchmark -w
./gup_benchmark: invalid option -- 'w'
...which is fixed with this commit.
Link: http://lkml.kernel.org/r/20191014184639.1512873-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Out of the three nc implementations widely in use, at least two (BSD netcat
and nmap-ncat) do not support -l combined with -s. Modify the nc invocation
to be accepted by all of them.
Fixes: 7df5e3db8f ("selftests: bpf: tc-bpf flow shaping with EDT")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Oskolkov <posk@google.com>
Link: https://lore.kernel.org/bpf/f5bf07dccd8b552a76c84d49e80b86c5aa071122.1571400024.git.jbenc@redhat.com
The memory @orig_flags is allocated by strdup(), it is freed on the
normal path, but leak to free on the error path.
Fix this by adding free(orig_flags) on the error path.
Fixes: 0e11115644 ("perf kmem: Print gfp flags in human readable string")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some minor bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjWIAAoJECgfDbjSjVRpT7AH/0bt4Oi8XR1+d0XT2B/fxPqZ
JodVrShmq+CmgAYdA1en+DXfZHspCMFVxWT+DHAcVoynWY8VVK4s/0uww1iXqPHG
dGOneAdo2kkMfP66KgQXn75vEyDyYPl9NY/TfhWZMD9dVOsqNp4BTVKHoXR5LlIx
j/r74bCpXGIs/3ZRz8IvO2F3uuvrgjNVTZ9mdlAcBtXx4Qe+X6LoR0YREpMAxhVo
dD4crD6XWm4tneeQ5nzqhA8uzqasbVZY8afuolZR+ZhplHldBNHwZu21aieN3Lfj
cVD73Ukarna8hw4szsdTTOBlbxPHAqasAcbW1rU464zy1g1NHDdT/NhvavZlvLo=
=GSKw
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/test: stop device before reset
tools/virtio: xen stub
tools/virtio: more stubs
To get the changes in:
78f6face5a ("sched: add kernel-doc for struct clone_args")
f14c234b4b ("clone3: switch to copy_struct_from_user()")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xqruu8wohwlbc57udg1g0xzx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
344c6c8047 ("KVM/Hyper-V: Add new KVM capability KVM_CAP_HYPERV_DIRECT_TLBFLUSH")
dee04eee91 ("KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface")
These trigger the rebuild of this object:
CC /tmp/build/perf/trace/beauty/ioctl.o
But do not result in any change in tooling, as the additions are not
being used in any table generatator.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lkml.kernel.org/n/tip-d1v48a0qfoe98u5v9tn3mu5u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
0cb8410b90 ("kvm: svm: Intercept RDPRU")
That trigger a rebuild in too in tooling:
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
But this time around no changes in tooling results, as SVM_EXIT_RDPRU
wasn't added to SVM_EXIT_REASONS, that is used in kvm-stat.c.
And addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/n/tip-pqzkt1hmfpqph3ts8i6zzmim@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf