On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough
to provide a correct 297MHz pixel clock, so switch the PLL base
frequency with a /2 OD when the 297MHz pixel clock is requested.
This solves the issue on G12A and also works fine on GXBB, GXL & GXM.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-2-narmstrong@baylibre.com
The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
- an enhanced plane blender, with up to 3 OSD planes
- support for AFBC 1.2 decoder (for Bifrost GPU)
- support display mode up to 4k60@75Hz
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313141030.5958-2-narmstrong@baylibre.com
Add the bindings for the Bifrost family of ARM Mali GPUs.
The Bifrost GPU architecture is similar to the Midgard family,
but with a different Shader Core & Execution Engine structures.
Bindings are based on the Midgard family bindings, but the inner
architectural changes makes it a separate family needing separate
bindings.
The Bifrost GPUs are present in a number of recent SoCs, like the
Amlogic G12A Family, and many other vendors.
The Amlogic vendor specific compatible is added to handle the
specific IP integration differences and dependencies.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[narmstrong: fixed small typo in compatible description]
Link: https://patchwork.freedesktop.org/patch/msgid/20190401080949.14550-1-narmstrong@baylibre.com
Time to kill some bad sample code people are copying from ;)
This is a complete rewrite of the cirrus driver. The cirrus_mode_set()
function is pretty much the only function which is carried over largely
unmodified. Everything else is upside down.
It is a single monster patch. But given that it does some pretty
fundamental changes to the drivers workflow and also reduces the code
size by roughly 70% I think it'll still be alot easier to review than a
longish baby-step patch series.
Changes summary:
- Given the small amout of video memory (4 MB) the cirrus device has
the rewritten driver doesn't try to manage buffers there. Instead
it will blit (memcpy) the active framebuffer to video memory.
- All gem objects are stored in main memory and are manged using the
new shmem helpers. ttm is out.
- It supports RG16, RG24 and XR24 formats. XR24 gets converted to RG24
or RG16 at blit time if needed, to avoid the pitch becoming larger
than what the cirrus hardware can handle.
- The simple display pipeline is used.
- The generic fbdev emulation is used.
- It's a atomic driver now.
- It runs wayland.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-6-kraxel@redhat.com
It is a drm_fb_xrgb8888_to_rgb565() variant which checks the clip
rectangle for the destination too.
Common code between drm_fb_xrgb8888_to_rgb565() and
drm_fb_xrgb8888_to_rgb565_dstclip() was factored out into the
drm_fb_xrgb8888_to_rgb565_lines() helper function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-4-kraxel@redhat.com
It is a drm_fb_memcpy() variant which checks the clip rectangle for the
destination too.
Common code between drm_fb_memcpy() and drm_fb_memcpy_dstclip() was
factored out into the drm_fb_memcpy_lines() helper function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-3-kraxel@redhat.com
UAPI Changes:
-syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming)
-Clarify that 1.0 can be represented by drm_color_lut (Daniel)
Cross-subsystem Changes:
-dt-bindings: Add binding for rk3066 hdmi (Johan)
-dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan)
-dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido)
-MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang)
Core Changes:
-memory: use dma_alloc_coherent when mem encryption is active (Christian)
-dma_buf: add support for a dma_fence chain (Christian)
-shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan)
Driver Changes:
-rockchip: Add support for rk3066 hdmi (Johan)
-ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel)
-lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang)
-vc4/v3d: Various cleanups and improved error handling (Eric)
-panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan)
-panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido)
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Joel Stanley <joel@jms.id.au>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlymY/4ACgkQlvcN/ahK
BwpQ7Qf/UPIpxGVNbNZaftKgxO4Po4D+2lvXmABlmZK1fhF0YCJeL9dZSnbeaXt+
7BhvvL5pskw+DFLCsWwQ0l51vSIA2AQMIfeplnmdMZS6zgp8Ky9sxB0F0s/ZyRhk
Acxw3pb2n8UkpHw31IcqRhGXK+lYjNKd139p+FPzuTZzeUVBg62NKwxsamME7UjX
BC+w3y1oNM2mlTHtJX+9XX2JK4IqXGiNq+rWJVWAtz7hnidb6OivnA8W6xKTw5LZ
PPANpCc4JURLvjt/kPDQ9X+tJEEAYEiAbeBIdpF+xrVtVdBHUIfo3KKUFB6OmvKI
ZkHj20K51j25TyDZof4EM/N7T2XOYg==
=gk9i
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-04-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.2:
UAPI Changes:
-syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming)
-Clarify that 1.0 can be represented by drm_color_lut (Daniel)
Cross-subsystem Changes:
-dt-bindings: Add binding for rk3066 hdmi (Johan)
-dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan)
-dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido)
-MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang)
Core Changes:
-memory: use dma_alloc_coherent when mem encryption is active (Christian)
-dma_buf: add support for a dma_fence chain (Christian)
-shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan)
Driver Changes:
-rockchip: Add support for rk3066 hdmi (Johan)
-ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel)
-lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang)
-vc4/v3d: Various cleanups and improved error handling (Eric)
-panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan)
-panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido)
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Joel Stanley <joel@jms.id.au>
[airlied: fixed XA limit build breakage, Rodrigo also submitted the same patch, but
I squashed it in the merge.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404201016.GA139524@art_vandelay
The call to of_find_matching_node_and_match returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD)
Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn
This driver is for the ASPEED BMC SoC's GFX display hardware. This
driver runs on the ARM based BMC systems, unlike the ast driver which
runs on a host CPU and is is for a PCI graphics device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-3-joel@jms.id.au
One might want to use the VC4 display stack without using Mesa.
Similar to the debugfs fixes for not having all of the possible
display bits enabled, make sure you can't oops in vc4 if v3d isn't
enabled.
v2: Fix matching against other v3d variants (review by Paul), don't
forget to set irq_enabled so that the vblank uapi works
v3: Use -ENODEV instead of -EINVAL on Paul's suggestion.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-2-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
The global list of all debugfs entries for the driver was painful: the
list couldn't see into the components' structs, so each component had
its own debugs show function to find the component, then find the
regset and dump it. The components also had to be careful to check
that they were actually registered in vc4 before dereferencing
themselves, in case they weren't probed on a particular platform.
They routinely failed at that.
Instead, we can have the components add their debugfs callbacks to a
little list in vc4 to be registered at drm_dev_register() time, which
gets vc4_debugfs.c out of the business of knowing the whole list of
components.
Thanks to this change, dsi0 (if it existed) would register its node.
v2: Rebase on hvs_underrun addition.
v3: whitespace fixup
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-1-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
The panel does not support clock frequency over 30.74 MHz. The clock
rate has been reduced to 29.70 MHz & new timings have been computed to
get a framerate of 50 fps.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155646-13636-1-git-send-email-yannick.fertre@st.com
At the end of initialization, a delay is required by the panel. Without
this delay, the panel could received a frame early & generate a crash of
panel (black screen).
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.com
Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI
DSI video mode panel.
The panel seems to use a Sitronix ST7703 look alike (most of the
commands look similar to the ST7703's data sheet but use a different
number of parameters). The initial version of the DSI init sequence
(including sleeps) were provided by the vendor. Sleeps were reduced
considerably though to speed up initialization.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a9ce687be283c66dfb26d1dfb52a7bf695090fa.1554114302.git.agx@sigxcpu.org
Interpreting it as a 0.16 fixed point means we can't accurately
represent 1.0. Which is one of the values we really should be able to
represent.
Since most (all?) luts have lower precision this will only affect
rounding of 0xffff.
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: "Kumar, Kiran S" <kiran.s.kumar@intel.com>
Cc: Kausal Malladi <kausalmalladi@gmail.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rob Bradford <robert.bradford@intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Stefan Schake <stschake@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: James (Qian) Wang <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329092027.3430-1-daniel.vetter@ffwll.ch
Hotplug can happen while drm_fbdev_generic_setup() is running so move
drm_client_add() call after setup is done to avoid
drm_fbdev_client_hotplug() running in two threads at the same time.
Fixes: 9060d7f493 ("drm/fb-helper: Finish the generic fbdev emulation")
Cc: stable@vger.kernel.org
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401141358.25309-1-noralf@tronnes.org
drm_dev_register() initializes internal clients like bootsplash as the
last thing it does, so all setup needs to be done at this point.
Fix by calling vc4_kms_load() before registering.
Also check the error code returned from that function.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-17-noralf@tronnes.org
For each enabled crtc the functions sets dpms on all registered connectors.
Limit this to only doing it once and on the connectors actually in use.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Fixes: 023eb571a1 ("drm: correctly update connector DPMS status in drm_fb_helper")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-3-noralf@tronnes.org
The gamma_size variable has not been used since
commit 4abe35204a ("drm/kms/fb: use slow work mechanism for normal hotplug also.")
While in the area move a comment back to its code block.
They got separated by
commit d50ba256b5 ("drm/kms: start adding command line interface using fb.").
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-2-noralf@tronnes.org
This pull requests adds initial Mali D71 support into the Arm "komeda" DRM
driver. The code has been reviewed at the end of last year, I just been
too slow with pushing it into mainline. Since it started baking in
linux-next we had a kbuild-bot issue raised and one from Joe Perches on
the MAINTAINERS entry, for which I'm including fixes here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401192833.GW21747@e110455-lin.cambridge.arm.com
amdgpu:
- Switch to HMM for userptr (reverted until HMM fixes land)
- New experimental SMU 11 replacement for powerplay for vega20 (not enabled by default)
- Initial RAS support for vega20
- BACO support for vega12
- BACO fixes for vega20
- Rework IH handling for page fault and retry interrupts
- Cleanly split CPU and GPU paths for GPUVM updates
- Powerplay fixes
- XGMI fixes
- Rework how DC interacts with atomic for planes
- Clean up and simplify DC/Powerplay interfaces
- Misc cleanups and bug fixes
amdkfd:
- Switch to HMM for userptr (reverted until HMM fixes land)
- Add initial RAS support
- MQD fixes
ttm:
- Unify DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
- Misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402170820.22197-1-alexander.deucher@amd.com
Fixes
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
on 32 bit platforms.
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Device Tree bindings documentation file is in a simplified path
that doesn't match the MAINTAINERS entry.
Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
We don't call this function if CONFIG_DEBUG_FS is not defined, but we
should not be compiling it either, as the declaration of the debugfs
core functions is not included.
Reported by the kbuild test robot.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
pm_runtime_get_sync could fail and thus deserves a check.
The patch adds such a check and return its error code upstream
if it indeed failed.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190324231602.2436-1-kjlu@umn.edu
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
