Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_init_mem_type':
drivers/gpu/drm/virtio/virtgpu_ttm.c:117:28: warning:
variable 'vgdev' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_bo_swap_notify':
drivers/gpu/drm/virtio/virtgpu_ttm.c:300:28: warning:
variable 'vgdev' set but not used [-Wunused-but-set-variable]
It is never used since introduction in dc5698e80c ("Add virtio gpu driver.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190325092631.152060-1-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On the D3 SoC the LVDS PHY must be enabled in the same register write
that enables the LVDS output. Skip writing the LVEN bit independently
on that platform, it will be set by the write that sets LVRES.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The D3 and E3 SoCs have different pixel clock frequency limits for the
LVDS encoder than the other SoCs in the Gen3 family. Adjust the mode
fixup implementation accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The rcar_du_crtc functions have a heavy reliance on the rcar_du_group
structure, in many cases just to access the DU device context.
To better separate the groups out of the CRTC handling code, give the
rcar_du_crtc its own pointer to the device and remove the indirection
through the group pointers.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The PLL parameters are computed by looping over the range of acceptable
M, N and E values, and selecting the combination that produces the
output frequency closest to the target. The internal frequency
constraints are taken into account by restricting the tested values for
the PLL parameters, reducing the search space. The target frequency,
however, is only taken into account when computing the post-PLL divider,
which can result in a 0 value for the divider when the PLL output
frequency being tested is lower than half of the target frequency.
Subsequent loops will produce a better set of PLL parameters, but for
some of the iterations this can result in a division by 0.
Fix it by clamping the divider value. We could instead restrict the E
values being tested in the inner loop, but that would require additional
calculation that would likely be less efficient as the E parameter can
only take three different values.
Fixes: c25c013611 ("drm: rcar-du: lvds: D3/E3 support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
drm_framebuffer.h makes use of a pointer to struct drm_format_info but
doesn't include drm_fourcc.h (neither directly nor indirectly).
Forward-declare the structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
The CRTC suspend and resume functions have been replaced, but the
prototypes were not removed.
Remove the redundant definitions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_crtc_mode_valid() and rcar_du_crtc_get_crc_sources()
functions are accessed only through a function pointer table.
Convert the function definitions to be static to the module.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The drm_crtc_state documentation contains a subtle misspelling of the
word subtle. Correct it.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car DU driver assumes that a bridge is always connected to the DU
output. This is valid for the LVDS and HDMI outputs, but the DPAD
outputs can be connected directly to a panel, in which case no bridge is
available.
To support this use case, detect whether the entities connected to the
DU DPAD outputs are encoders or panels based on the number of ports of
their DT node, and retrieve the corresponding type of DRM objects. For
panels, additionally create panel bridge instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kevin Key <kevin.key@gentex.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
No need to update current profile mode if the new profile mode
does not take effect in fact.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently only top pipe gets output tf programmed. This change
makes all odm head pipes get output tf programmed.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a functions to return swizzle types for dml
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pass SDP splitting when setting stream attributes for future use
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create dccg_init and init_clocks for future use
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
set_display_requirement, dcn1_pplib_apply_display_requirements
are no longer used and should be removed.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The resource constructor currently needs num_virtual_links from
init_data but will need access to other items provided by DM.
[HOW]
Pass init_data into DCN create_resource_pool functions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When you have a SST branch device the driver, Even no sink device connected,
it also send HPD with a valid EDID. Driver will config it to DP sink.
Therefore, there're two displays in display setting.
DPCD 0x05, DFP_PRESENT = 1 (branch device),
DFP_TYPE = 00 (Display Port)
[How]
Driver determine DPCD 0x05 DFP_PRESENT = 1(branch) as an active dongle
And check DFP count.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
program default output gamma if no user specific gamma
parameters passed.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
existing logic finds "first free pipe from 5 -> 0" to split
this will cause certain sequences to require DC to move
an MPCC from one tree to another, which is unsupported
this leads to blackscreen
to mitigate this problem, we will always try to acquire the
"preferred" pipe, and each pipe has a unique preferred pipe
this means we avoid most of the scenarios where
pipe splitting leads to moving MPCC from one tree
to another
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of skipping the root PD while processing the relocated list just never
put it on the list in the first place.
This avoids walking the list all together when the root PD is the only entry
and so also avoids trying to submit a zero sized IB to the SDMA.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is redundant with the job pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean that up further and also fix another case where the BO
wasn't kmapped for CPU based updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver vote low to high pstate switch whenever there is an outstanding
XGMI mapping request. Driver vote high to low pstate when all the
outstanding XGMI mapping is terminated.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And remove the existing code when it is unused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the cleanup jobs performed in pre_fini may still need these
buffers. NULL pointer dereference will be triggered without them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Large piece of codes share one error prompt. That
is not friendly for debugging.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error return value should be correctly reflected.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"error" was not correctly spelled.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
there is ras_control node which can do its job.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpes to transalte the two enums. And it will catch bugs
easily.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
better to use macro.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ras context might be NULL, so move con->h_data after check !con
also fix sizeof wrong type while at it.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I forgot the !CONFIG_FBDEV case. Also some kerneldoc needed more
adjusting.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327125819.16478-1-daniel.vetter@ffwll.ch
This was missing in the original addition of those formats, but in
PLANE_SIZE description it's mentioned that 8 cpp formats are not
valid with Yf tiling. Reject this case properly.
Also reject Y21x Yf tiling support this is also not supported.
Changes since v1:
- Reject Y21x as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Y41x formats is a 4:4:4 format, so it can be addressed with pixel level accuracy.
Meanwhile it seems that while rotating YUYV 4:2:2 formats need a multiple of 2
for width and height, otherwise corruption occurs.
For YUV 4:2:2, the spec says that w/h should always be even, but we get
away with odd height while unrotated. When rotating it seems corruption
occurs with an odd x/y, and w/h should always be even.
Just to be completely paranoid, reject odd x/y w/h when rotating 90/270.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The intent was to expose these as part of the means to perform full
context recovery (though not the SINGLE_TIMELINE, that is for later and
just sucked as collateral damage). As that requires a couple more
patches to complete the series, roll back the earlier chunks of ABI for
an intervening PR. We keep all the internals intact and under selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327105814.14694-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This is to disable semaphore usage when on vGPU for now. Unfortunately
GVT-g hasn't fully enabled semaphore usage yet, so current guest with
semaphore use would cause vGPU failure.
Although current semaphore failure with vGPU can be simply resolved by
allowing cmd parser to accept MI_SEMAPHORE_WAIT command with address
audit, we're checking general usage of semaphore and how we should
handle it properly for virtualization in consider of function and
security concern. So we decide to request to disable it for now in
guest driver. Once GVT could support it, we would add new compat bit
to turn it on.
Fixes: e886196469 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") #vgpu
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327090636.3547-1-zhenyuw@linux.intel.com
Update the DP MSA MISC bits for fastsets. This is needed
when we change between limited and full range RGB output.
On HSW+ changing limited_range does not currently result in a
full modeset since we have don't have the readout code for it
(for DP we could, and probably should, readout from TRANS_MSA_MISC
itself, for HDMI we would have to rely on the infoframe). So
the PIPE_CONF_CHECK() is only performed for pre-HSW platforms.
That means any change in the value will result in a fastset
instead. Fortunately there is no prohibition to changing
TRANS_MSA_MISC dynamically, so it looks like we can legally do
fastsets for this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-5-ville.syrjala@linux.intel.com
Allow DP MST to output any color depth. This means deep color as
well as falling back to 6bpc if we would otherwise require too
much bandwidth.
TODO: We should probably extend bw_contstrained scheme to force
all streams on the link to 6bpc if we can't fit the new stream(s)
otherwise.
v2: Use a proper for-loop (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-3-ville.syrjala@linux.intel.com
Looks like EDID_QUIRK_FIRST_DETAILED_PREFERRED never did anything.
Its counterpart in f86EdidModes.c is properly hooked up but somehow
that functionality was lost when it was copied into the kernel.
The concensus seems to be that this quirk is a bit misguided
anyway so let's nuke the leftovers.
For posterity here are some links to known cases:
* Proview AY765C
https://bugs.freedesktop.org/show_bug.cgi?id=15160
* Unknown Acer
https://bugzilla.redhat.com/show_bug.cgi?id=284231 (got the
reference from xf86EdidModes.c)
* Peacock Ergovision 19 (only in xf86EdidModes.c)
https://bugzilla.redhat.com/show_bug.cgi?id=492359
* Philips 107p5 CRT
"Reported on xorg@ with pastebin", didn't find the mail(s)
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322174244.23945-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Remove the unused DRM_DISPLAY_INFO_LEN from the uapi headers.
I presume the original plan was to expose the display name
via getconnector, but looks like that never happened. So we have
the define for the length of the string but no string anywhere.
A quick scan didn't seem to reveal userspace referencing this
so hopefully we can just nuke it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_display_info.name is only ever set by a few panel drivers but
never actually used anywhere except in i915 debugfs code. Trash it.
v2: Fix typo in commit msg (Sam Ravnborg)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
