[ Upstream commit aa83da7f47 ]
It turns out that when extending an existing bio, gfs2_find_jhead fails to
check if the block number is consecutive, which leads to incorrect reads for
fragmented journals.
In addition, limit the maximum bio size to an arbitrary value of 2 megabytes:
since commit 07173c3ec2 ("block: enable multipage bvecs"), if we just keep
adding pages until bio_add_page fails, bios will grow much larger than useful,
which pins more memory than necessary with barely any additional performance
gains.
Fixes: f4686c26ec ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c077dc5e06 ]
First, it should be noted that the CQE timeout (60 seconds) is substantial
so a CQE request that times out is really stuck, and the race between
timeout and completion is extremely unlikely. Nevertheless this patch
fixes an issue with it.
Commit ad73d6fead ("mmc: complete requests from ->timeout")
preserved the existing functionality, to complete the request.
However that had only been necessary because the block layer
timeout handler had been marking the request to prevent it from being
completed normally. That restriction was removed at the same time, the
result being that a request that has gone will have been completed anyway.
That is, the completion was unnecessary.
At the time, the unnecessary completion was harmless because the block
layer would ignore it, although that changed in kernel v5.0.
Note for stable, this patch will not apply cleanly without patch "mmc:
core: Fix recursive locking issue in CQE recovery path"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: ad73d6fead ("mmc: complete requests from ->timeout")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39a22f7374 ]
Consider the following stack trace
-001|raw_spin_lock_irqsave
-002|mmc_blk_cqe_complete_rq
-003|__blk_mq_complete_request(inline)
-003|blk_mq_complete_request(rq)
-004|mmc_cqe_timed_out(inline)
-004|mmc_mq_timed_out
mmc_mq_timed_out acquires the queue_lock for the first
time. The mmc_blk_cqe_complete_rq function also tries to acquire
the same queue lock resulting in recursive locking where the task
is spinning for the same lock which it has already acquired leading
to watchdog bark.
Fix this issue with the lock only for the required critical section.
Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b670 ("mmc: block: Add CQE support")
Suggested-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588868135-31783-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6bfb1bf00 ]
In the request completion path with CQE, request type is being checked
after the request is getting completed. This is resulting in returning
the wrong request type and leading to the IO hang issue.
ASYNC request type is getting returned for DCMD type requests.
Because of this mismatch, mq->cqe_busy flag is never getting cleared
and the driver is not invoking blk_mq_hw_run_queue. So requests are not
getting dispatched to the LLD from the block layer.
All these eventually leading to IO hang issues.
So, get the request type before completing the request.
Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b670 ("mmc: block: Add CQE support")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b56ff195c3 ]
Need to clear some bits in a vendor-defined register after reboot from
Windows 10.
Fixes: e51df6ce66 ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Reported-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Link: https://lore.kernel.org/r/20200504063957.6638-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81aabbb9fb ]
In bpf_tcp_ingress we used apply_bytes to subtract bytes from sg.size
which is used to track total bytes in a message. But this is not
correct because apply_bytes is itself modified in the main loop doing
the mem_charge.
Then at the end of this we have sg.size incorrectly set and out of
sync with actual sk values. Then we can get a splat if we try to
cork the data later and again try to redirect the msg to ingress. To
fix instead of trying to track msg.size do the easy thing and include
it as part of the sk_msg_xfer logic so that when the msg is moved the
sg.size is always correct.
To reproduce the below users will need ingress + cork and hit an
error path that will then try to 'free' the skmsg.
[ 173.699981] BUG: KASAN: null-ptr-deref in sk_msg_free_elem+0xdd/0x120
[ 173.699987] Read of size 8 at addr 0000000000000008 by task test_sockmap/5317
[ 173.700000] CPU: 2 PID: 5317 Comm: test_sockmap Tainted: G I 5.7.0-rc1+ #43
[ 173.700005] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[ 173.700009] Call Trace:
[ 173.700021] dump_stack+0x8e/0xcb
[ 173.700029] ? sk_msg_free_elem+0xdd/0x120
[ 173.700034] ? sk_msg_free_elem+0xdd/0x120
[ 173.700042] __kasan_report+0x102/0x15f
[ 173.700052] ? sk_msg_free_elem+0xdd/0x120
[ 173.700060] kasan_report+0x32/0x50
[ 173.700070] sk_msg_free_elem+0xdd/0x120
[ 173.700080] __sk_msg_free+0x87/0x150
[ 173.700094] tcp_bpf_send_verdict+0x179/0x4f0
[ 173.700109] tcp_bpf_sendpage+0x3ce/0x5d0
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861290407.14306.5327773422227552482.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e104c2381 ]
When sk_msg_pop() is called where the pop operation is working on
the end of a sge element and there is no additional trailing data
and there _is_ data in front of pop, like the following case,
|____________a_____________|__pop__|
We have out of order operations where we incorrectly set the pop
variable so that instead of zero'ing pop we incorrectly leave it
untouched, effectively. This can cause later logic to shift the
buffers around believing it should pop extra space. The result is
we have 'popped' more data then we expected potentially breaking
program logic.
It took us a while to hit this case because typically we pop headers
which seem to rarely be at the end of a scatterlist elements but
we can't rely on this.
Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861288359.14306.7654891716919968144.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 421abe2003 ]
In commit 5a7d202b15, a logical AND was erroneously changed to an OR,
causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for
kabylake and coffeelake, even when IPC is disabled. Fix the logic so
that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled.
Fixes: 5a7d202b15 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl")
Cc: stable@vger.kernel.org # 5.3.x+
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com
(cherry picked from commit 690d22dafa)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37e31d2d26 ]
The i40iw_arp_table() function can return -EOVERFLOW if
i40iw_alloc_resource() fails so we can't just test for "== -1".
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1034872123 ]
The snd-firewire-lib.ko has 'amdtp-packet' event of tracepoints. Current
printk format for the event includes 'sizeof(u8)' macro expected to be
extended in compilation time. However, this is not done. As a result,
perf tools cannot parse the event for printing:
$ mount -l -t debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
$ cat /sys/kernel/debug/tracing/events/snd_firewire_lib/amdtp_packet/format
...
print fmt: "%02u %04u %04x %04x %02d %03u %02u %03u %02u %01u %02u %s",
REC->second, REC->cycle, REC->src, REC->dest, REC->channel,
REC->payload_quadlets, REC->data_blocks, REC->data_block_counter,
REC->packet_index, REC->irq, REC->index,
__print_array(__get_dynamic_array(cip_header),
__get_dynamic_array_len(cip_header),
sizeof(u8))
$ sudo perf record -e snd_firewire_lib:amdtp_packet
[snd_firewire_lib:amdtp_packet] function sizeof not defined
Error: expected type 5 but read 0
This commit fixes it by obsoleting the macro with actual size.
Cc: <stable@vger.kernel.org>
Fixes: bde2bbdb30 ("ALSA: firewire-lib: use dynamic array for CIP header of tracing events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200503045718.86337-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69388e15f5 ]
According to Braswell NDA Specification Update (#557593),
concurrent read accesses may result in returning 0xffffffff and write
instructions may be dropped. We have an established format for the
commit references, i.e.
cdca06e4e8 ("pinctrl: baytrail: Add missing spinlock usage in
byt_gpio_irq_handler")
Fixes: 0bd50d719b ("pinctrl: cherryview: prevent concurrent access to GPIO controllers")
Signed-off-by: Grace Kao <grace.kao@intel.com>
Reported-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90bcb0c3ca ]
Fix a typo in the readl/writel accessor conversion where val is used
instead of pol changing the behavior of the original code.
Cc: stable@vger.kernel.org
Fixes: 6c73698904 pinctrl: qcom: Introduce readl/writel accessors
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200414003726.25347-1-ansuelsmth@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccd025eadd ]
It appears that pin configuration for GPIO chip hasn't been enabled yet
due to absence of ->set_config() callback.
Enable it here for Intel Baytrail.
Fixes: c501d0b149 ("pinctrl: baytrail: Add pin control operations")
Depends-on: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b7275c877 ]
It appears that SPT-H variant has different offset for PAD locking registers.
Fix it here.
Fixes: 551fa5801e ("pinctrl: intel: sunrisepoint: Add Intel Sunrisepoint-H support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b301750f7 ]
If the EC GPE status is not set after checking all of the other GPEs,
acpi_s2idle_wake() returns 'false', to indicate that the SCI event
that has just triggered is not a system wakeup one, but it does that
without canceling the pending wakeup and re-arming the SCI for system
wakeup which is a mistake, because it may cause s2idle_loop() to busy
spin until the next valid wakeup event. [If that happens, the first
spurious wakeup is still pending after acpi_s2idle_wake() has
returned, so s2idle_enter() does nothing, acpi_s2idle_wake()
is called again and it sees that the SCI has triggered, but no GPEs
are active, so 'false' is returned again, and so on.]
Fix that by moving all of the GPE checking logic from
acpi_s2idle_wake() to acpi_ec_dispatch_gpe() and making the
latter return 'true' only if a non-EC GPE has triggered and
'false' otherwise, which will cause acpi_s2idle_wake() to
cancel the pending SCI wakeup and re-arm the SCI for system
wakeup regardless of the EC GPE status.
This also addresses a lockup observed on an Elitegroup EF20EA laptop
after attempting to wake it up from suspend-to-idle by a key press.
Fixes: d5406284ff ("ACPI: PM: s2idle: Refine active GPEs check")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207603
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Link: https://lore.kernel.org/linux-acpi/CAB4CAwdqo7=MvyG_PE+PGVfeA17AHF5i5JucgaKqqMX6mjArbQ@mail.gmail.com/
Reported-by: Chris Chiu <chiu@endlessm.com>
Tested-by: Chris Chiu <chiu@endlessm.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa8dac3968 ]
The commit noted below fixed a case where a pq is left on the sdma wait
list.
It however missed another case.
user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request().
If the first one fails as indicated by -EBUSY, the pq will be placed on
the waitlist as by design.
If the second call then succeeds, the pq is still on the waitlist setting
up a race with the interrupt handler if a subsequent request uses a
different SDMA engine
Fix by deleting the first call.
The use of pcount and the intent to send a short burst of packets followed
by the larger balance of packets was never correctly implemented, because
the two calls always send pcount packets no matter what. A subsequent
patch will correct that issue.
Fixes: 9a293d1e21 ("IB/hfi1: Ensure pq is not left on waitlist")
Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 282ede76e4 ]
The kernel prints a message similar to
"[ 28.881959] do_IRQ: 5.36 No irq handler for vector"
when GL975x resumes from suspend. Implement a resume callback to fix this.
Fixes: 31e43f3189 ("mmc: sdhci-pci-gli: Enable MSI interrupt for GL975x")
Co-developed-by: Renius Chen <renius.chen@genesyslogic.com.tw>
Signed-off-by: Renius Chen <renius.chen@genesyslogic.com.tw>
Tested-by: Dave Flogeras <dflogeras2@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Vineeth Pillai <vineethrp@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200427103048.20785-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
[Samuel Zou: Make sdhci_pci_gli_resume() static]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 566a2ab3c9 ]
Make sure we don't walk past the end of the metadata in gfs2_walk_metadata: the
inode holds fewer pointers than indirect blocks.
Slightly clean up gfs2_iomap_get.
Fixes: a27a0c9b6a ("gfs2: gfs2_walk_metadata fix")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52e4e36807 ]
Commit 317d931392 ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.
The previous fix enable power save node universally for ALC225, however
it makes some ALC225 systems unable to produce any sound.
So let's only enable power save node for the affected Dell Wyse
platform.
Fixes: 317d931392 ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdf83646c0 ]
This fixes GPU hangs due to cache coherency issues.
v2: Split the version bump to a separate patch
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668a6741f8 ]
[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.
[HOW]
Update the value in dcn21_resource to match the spreadsheet.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3159d41db3 ]
Check before programming the register since it isn't present on
all IPs using this code.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 690ae30be1 ]
hwmgr->pm_en is initialized at hwmgr_hw_init.
during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)
pm_en is used in the above two cases while it has not yet been initialized
So avoid using pm_en in the above two functions for V320 passthrough.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca76282b6f ]
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c539776ac ]
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0c0d0cf59 ]
It is possible to get multiple records from trace during test and then more
than 4 arguments are assigned to ARGS. This situation results in the failure
of kprobe_args_type.tc. For example:
-----------------------------------------------------------
grep testprobe trace
ftracetest-5902 [001] d... 111195.682227: testprobe: (_do_fork+0x0/0x460) arg1=334823024 arg2=334823024 arg3=0x13f4fe70 arg4=7
pmlogger-5949 [000] d... 111195.709898: testprobe: (_do_fork+0x0/0x460) arg1=345308784 arg2=345308784 arg3=0x1494fe70 arg4=7
grep testprobe trace
sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'
ARGS='334823024 334823024 0x13f4fe70 7
345308784 345308784 0x1494fe70 7'
-----------------------------------------------------------
We don't care which process calls do_fork so just check the first record to
fix the issue.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c89446379 ]
When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.
Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e45676a4d ]
pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c1918c8f5 ]
When building with the LLVM linker this error occurrs:
LD arch/riscv/kernel/vdso/vdso-syms.o
ld.lld: error: no input files
This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.
Use the long option name for compatibility between the two.
Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db803036ad ]
If a UMH process created by fork_usermode_blob() fails to execute,
a pair of struct file allocated by umh_pipe_setup() will leak.
Under normal conditions, the caller (like bpfilter) needs to manage the
lifetime of the UMH and its two pipes. But when fork_usermode_blob()
fails, the caller doesn't really have a way to know what needs to be
done. It seems better to do the cleanup ourselves in this case.
Fixes: 449325b52b ("umh: introduce fork_usermode_blob() helper")
Signed-off-by: Vincent Minet <v.minet@criteo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f8492df08 ]
r8169 never had native support for the RTL8401, however it reportedly
worked with the fallback to RTL8101e [0]. Therefore let's add this
as an explicit assignment.
[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=956868
Fixes: b4cc2dcc9c ("r8169: remove default chip versions")
Reported-by: Camaleón <noelamac@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5099dea0a5 ]
Fix to return negative error code -ENOMEM from the kzalloc() error
handling case instead of 0, as done elsewhere in this function.
Fixes: 174ab544e3 ("nfp: abm: add cls_u32 offload for simple band classification")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc4de047b3 ]
The stated intent of the original commit is to is to "return the timestamp
corresponding to the highest sequence number data returned." The current
implementation returns the timestamp for the last byte of the last fully
read skb, which is not necessarily the last byte in the recv buffer. This
patch converts behavior to the original definition, and to the behavior of
the previous draft versions of commit 98aaa913b4 ("tcp: Extend
SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") which also match this
behavior.
Fixes: 98aaa913b4 ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg")
Co-developed-by: Iris Liu <iris@onechronos.com>
Signed-off-by: Iris Liu <iris@onechronos.com>
Signed-off-by: Kelly Littlepage <kelly@onechronos.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 090e28b229 ]
If systemd is configured to use hybrid mode which enables the use of
both cgroup v1 and v2, systemd will create new cgroup on both the default
root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach
task to the two cgroups. If the task does some network thing then the v2
cgroup can never be freed after the session exited.
One of our machines ran into OOM due to this memory leak.
In the scenario described above when sk_alloc() is called
cgroup_sk_alloc() thought it's in v2 mode, so it stores
the cgroup pointer in sk->sk_cgrp_data and increments
the cgroup refcnt, but then sock_update_netprioidx()
thought it's in v1 mode, so it stores netprioidx value
in sk->sk_cgrp_data, so the cgroup refcnt will never be freed.
Currently we do the mode switch when someone writes to the ifpriomap
cgroup control file. The easiest fix is to also do the switch when
a task is attached to a new cgroup.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57644431a6 ]
In commit b406472b5a ("net: ipv4: avoid mixed n_redirects and
rate_tokens usage") I missed the fact that a 0 'rate_tokens' will
bypass the backoff algorithm.
Since rate_tokens is cleared after a redirect silence, and never
incremented on redirects, if the host keeps receiving packets
requiring redirect it will reply ignoring the backoff.
Additionally, the 'rate_last' field will be updated with the
cadence of the ingress packet requiring redirect. If that rate is
high enough, that will prevent the host from generating any
other kind of ICMP messages
The check for a zero 'rate_tokens' value was likely a shortcut
to avoid the more complex backoff algorithm after a redirect
silence period. Address the issue checking for 'n_redirects'
instead, which is incremented on successful redirect, and
does not interfere with other ICMP replies.
Fixes: b406472b5a ("net: ipv4: avoid mixed n_redirects and rate_tokens usage")
Reported-and-tested-by: Colin Walters <walters@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3047211ca1 ]
There is a soft dependency against dsa_loop_bdinfo.ko which sets up the
MDIO device registration, since there are no symbols referenced by
dsa_loop.ko, there is no automatic loading of dsa_loop_bdinfo.ko which
is needed.
Fixes: 98cd1552ea ("net: dsa: Mock-up driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8a1b0efd6 ]
if some function in ndo_stop interface returns failure because of
hardware fault, must go on excuting rest steps rather than return
failure directly, otherwise will cause memory leak.And bump the
timeout for SET_FUNC_STATE to ensure that cmd won't return failure
when hw is busy. Otherwise hw may stomp host memory if we free
memory regardless of the return value of SET_FUNC_STATE.
Fixes: 51ba902a16 ("net-next/hinic: Initialize hw interface")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6d32a51198 ]
The "location" is controlled by the user via the ethtool_set_rxnfc()
function. This update_cls_rule() function checks for array overflows
but it doesn't check if the value is negative. I have changed the type
to unsigned to prevent array underflows.
Fixes: afb90dbb5f ("dpaa2-eth: Add ethtool support for flow classification")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 01c3259818 ]
When we fill up a receive VQ, try_fill_recv currently tries to count
kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that
uses a seqcount. sequence counts are "lock" constructs where you need to
make sure that writers are serialized.
In turn, this means that we mustn't run two try_fill_recv concurrently.
Which of course we don't. We do run try_fill_recv sometimes from a
softirq napi context, and sometimes from a fully preemptible context,
but the later always runs with napi disabled.
However, when it comes to the seqcount, lockdep is trying to enforce the
rule that the same lock isn't accessed from preemptible and softirq
context - it doesn't know about napi being enabled/disabled. This causes
a false-positive warning:
WARNING: inconsistent lock state
...
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
As a work around, shut down the warning by switching
to u64_stats_update_begin_irqsave - that works by disabling
interrupts on 32 bit only, is a NOP on 64 bit.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 24adbc1676 ]
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100%
overhead in tcp_set_rcvlowat()
This works well when skb->len/skb->truesize ratio is bigger than 0.5
But if we receive packets with small MSS, we can end up in a situation
where not enough bytes are available in the receive queue to satisfy
RCVLOWAT setting.
As our sk_rcvbuf limit is hit, we send zero windows in ACK packets,
preventing remote peer from sending more data.
Even autotuning does not help, because it only triggers at the time
user process drains the queue. If no EPOLLIN is generated, this
can not happen.
Note poll() has a similar issue, after commit
c7004482e8 ("tcp: Respect SO_RCVLOWAT in tcp_poll().")
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 09454fd0a4 ]
This reverts commit 19bda36c4299ce3d7e5bce10bebe01764a655a6d:
| ipv6: add mtu lock check in __ip6_rt_update_pmtu
|
| Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu.
| It leaded to that mtu lock doesn't really work when receiving the pkt
| of ICMPV6_PKT_TOOBIG.
|
| This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4
| did in __ip_rt_update_pmtu.
The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work.
There's already a comment to this effect elsewhere in the kernel:
$ git grep -p -B1 -A3 'RTAX_MTU lock'
net/ipv6/route.c=4813=
static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg)
...
/* In IPv6 pmtu discovery is not optional,
so that RTAX_MTU lock cannot disable it.
We still use this lock to block changes
caused by addrconf/ndisc.
*/
This reverts to the pre-4.9 behaviour.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 19bda36c42 ("ipv6: add mtu lock check in __ip6_rt_update_pmtu")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b8c1583951 ]
We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.
Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd4a517738 ]
Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.
Fixes: a7c30e62d4 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher