commit 7bd57fbc4a upstream.
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9c ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
Example output with the patch applied:
ptr error-ptr NULL
%p: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%pK, kptr = 0: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%px: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 1: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 2: 0000000000000000 0000000000000000 0000000000000000
Fixes: 3e5903eb9c ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8f482deb0 upstream.
When the kernel is built with lockdep support and the owl-dma driver is
used, the following message is shown:
[ 2.496939] INFO: trying to register non-static key.
[ 2.501889] the code is fine but needs lockdep annotation.
[ 2.507357] turning off the locking correctness validator.
[ 2.512834] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.3+ #15
[ 2.519084] Hardware name: Generic DT based system
[ 2.523878] Workqueue: events_freezable mmc_rescan
[ 2.528681] [<801127f0>] (unwind_backtrace) from [<8010da58>] (show_stack+0x10/0x14)
[ 2.536420] [<8010da58>] (show_stack) from [<8080fbe8>] (dump_stack+0xb4/0xe0)
[ 2.543645] [<8080fbe8>] (dump_stack) from [<8017efa4>] (register_lock_class+0x6f0/0x718)
[ 2.551816] [<8017efa4>] (register_lock_class) from [<8017b7d0>] (__lock_acquire+0x78/0x25f0)
[ 2.560330] [<8017b7d0>] (__lock_acquire) from [<8017e5e4>] (lock_acquire+0xd8/0x1f4)
[ 2.568159] [<8017e5e4>] (lock_acquire) from [<80831fb0>] (_raw_spin_lock_irqsave+0x3c/0x50)
[ 2.576589] [<80831fb0>] (_raw_spin_lock_irqsave) from [<8051b5fc>] (owl_dma_issue_pending+0xbc/0x120)
[ 2.585884] [<8051b5fc>] (owl_dma_issue_pending) from [<80668cbc>] (owl_mmc_request+0x1b0/0x390)
[ 2.594655] [<80668cbc>] (owl_mmc_request) from [<80650ce0>] (mmc_start_request+0x94/0xbc)
[ 2.602906] [<80650ce0>] (mmc_start_request) from [<80650ec0>] (mmc_wait_for_req+0x64/0xd0)
[ 2.611245] [<80650ec0>] (mmc_wait_for_req) from [<8065aa10>] (mmc_app_send_scr+0x10c/0x144)
[ 2.619669] [<8065aa10>] (mmc_app_send_scr) from [<80659b3c>] (mmc_sd_setup_card+0x4c/0x318)
[ 2.628092] [<80659b3c>] (mmc_sd_setup_card) from [<80659f0c>] (mmc_sd_init_card+0x104/0x430)
[ 2.636601] [<80659f0c>] (mmc_sd_init_card) from [<8065a3e0>] (mmc_attach_sd+0xcc/0x16c)
[ 2.644678] [<8065a3e0>] (mmc_attach_sd) from [<8065301c>] (mmc_rescan+0x3ac/0x40c)
[ 2.652332] [<8065301c>] (mmc_rescan) from [<80143244>] (process_one_work+0x2d8/0x780)
[ 2.660239] [<80143244>] (process_one_work) from [<80143730>] (worker_thread+0x44/0x598)
[ 2.668323] [<80143730>] (worker_thread) from [<8014b5f8>] (kthread+0x148/0x150)
[ 2.675708] [<8014b5f8>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
[ 2.682912] Exception stack(0xee8fdfb0 to 0xee8fdff8)
[ 2.687954] dfa0: 00000000 00000000 00000000 00000000
[ 2.696118] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.704277] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
The obvious fix would be to use 'spin_lock_init()' on 'pchan->lock'
before attempting to call 'spin_lock_irqsave()' in 'owl_dma_get_pchan()'.
However, according to Manivannan Sadhasivam, 'pchan->lock' was supposed
to only protect 'pchan->vchan' while 'od->lock' does a similar job in
'owl_dma_terminate_pchan()'.
Therefore, this patch substitutes 'pchan->lock' with 'od->lock' and
removes the 'lock' attribute in 'owl_dma_pchan' struct.
Fixes: 47e20577c2 ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Link: https://lore.kernel.org/r/c6e6cdaca252b5364bd294093673951036488cf0.1588439073.git.cristian.ciocaltea@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b41030fdc upstream.
In case of dmatest is built-in and no channel was configured test
doesn't run with:
dmatest: Could not start test, no channels configured
Even though description to "channel" parameter claims that default is
any.
Add default channel back as it used to be rather than reject test with
no channel configuration.
Fixes: d53513d5dc ("dmaengine: dmatest: Add support for multi channel testing)
Reported-by: Dijil Mohan <Dijil.Mohan@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20200429071522.58148-1-vladimir.murzin@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad99cb5e78 upstream.
If the mapping address is wrong then we have to release the reference to
it before returning -EINVAL.
Fixes: 088880ddc0 ("drm/etnaviv: implement softpin")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a5fd0dbd8 upstream.
Commit b53611fb1c ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1c ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200516214205.276266-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6b39f0707 upstream.
policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.
When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.
Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.
Fixes: 5ac8c355ae ("apparmor: allow introspecting the loaded policy pre internal transform")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b845ffa0 upstream.
aa_change_profile() invokes aa_get_current_label(), which returns
a reference of the current task's label.
According to the comment of aa_get_current_label(), the returned
reference must be put with aa_put_label().
However, when the original object pointed by "label" becomes
unreachable because aa_change_profile() returns or a new object
is assigned to "label", reference count increased by
aa_get_current_label() is not decreased, causing a refcnt leak.
Fix this by calling aa_put_label() before aa_change_profile() return
and dropping unnecessary aa_get_current_label().
Fixes: 9fcf78cca1 ("apparmor: update domain transitions that are subsets of confinement at nnp")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c54d481d71 upstream.
In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.
Fixes: 52e8c38001 ("apparmor: Fix memory leak of rule on error exit path")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40b697e256 upstream.
The GC860 has one GPU device which has a 2d and 3d core. In this case
we want to expose perfmon information for both cores.
The driver has one array which contains all possible perfmon domains
with some meta data - doms_meta. Here we can see that for the GC860
two elements of that array are relevant:
doms_3d: is at index 0 in the doms_meta array with 8 perfmon domains
doms_2d: is at index 1 in the doms_meta array with 1 perfmon domain
The userspace driver wants to get a list of all perfmon domains and
their perfmon signals. This is done by iterating over all domains and
their signals. If the userspace driver wants to access the domain with
id 8 the kernel driver fails and returns invalid data from doms_3d with
and invalid offset.
This results in:
Unable to handle kernel paging request at virtual address 00000000
On such a device it is not possible to use the userspace driver at all.
The fix for this off-by-one error is quite simple.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: ed1dd899ba ("drm/etnaviv: rework perfmon query infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cf6022bd9 upstream.
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2e6b75f6e upstream.
Testing with Loopback I found that, after a Loopback LUN has executed a
TMR, I can no longer unlink the LUN. The rm command hangs in
transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp)
The reason is, that transport_lun_remove_cmd() is not called at the end of
target_tmr_work().
It seems, that in other fabrics this call happens implicitly when the
fabric drivers call transport_generic_free_cmd() during their
->queue_tm_rsp().
Unfortunately Loopback seems to not comply to the common way
of calling transport_generic_free_cmd() from ->queue_*().
Instead it calls transport_generic_free_cmd() from its
->check_stop_free() only.
But the ->check_stop_free() is called by
transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun
pointer. Therefore the following transport_generic_free_cmd() skips the
transport_lun_remove_cmd().
So this patch re-adds the transport_lun_remove_cmd() at the end of
target_tmr_work(), which was removed during commit 2c9fa49e10 ("scsi:
target/core: Make ABORT and LUN RESET handling synchronous").
For fabrics using transport_generic_free_cmd() in the usual way the double
call to transport_lun_remove_cmd() doesn't harm, as
transport_lun_remove_cmd() checks for this situation and does not release
lun_ref twice.
Link: https://lore.kernel.org/r/20200513153443.3554-1-bstroesser@ts.fujitsu.com
Fixes: 2c9fa49e10 ("scsi: target/core: Make ABORT and LUN RESET handling synchronous")
Cc: stable@vger.kernel.org
Tested-by: Bryant G. Ly <bryangly@gmail.com>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb9024b064 upstream.
Calling ql_log() inside qla2x00_port_speed_show() is causing messages to be
output to the console for no particularly good reason. The sysfs read
routine should just return the information to userspace. The only reason
to log a message is when the port speed actually changes, and this already
occurs elsewhere.
Link: https://lore.kernel.org/r/20200504175416.15417-1-emilne@redhat.com
Fixes: 4910b524ac ("scsi: qla2xxx: Add support for setting port speed")
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 259eb82475 upstream.
A few known Clevo machines (PC50, PC70, X170) with ALC1220 codec need
the existing quirk for pins for PB51 and co.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200519065012.13119-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9e8fe0cff upstream.
The Gigabyte X570 Aorus Xtreme motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200518053844.42743-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7513c5786 upstream.
There is a corner case that ALSA keeps increasing the hw_ptr but DMA
already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does
not move at all but the hw_ptr got increased at some point of time so
snd_pcm_avail() will return a large number which seems to be a buffer
underrun event from user space program point of view. The program
thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554
...
[ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362
[ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
[ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size
frames unconditionally if the hw_ptr is not updated for over half of
buffer time. As the hw_base increases, so does the hw_ptr increased
by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit
(buffer_size) easily becase the hw_ptr itself got increased by same
buffer_size samples when the corner case happens. In following log,
the buffer_size is 16368 samples but the avail is 21810 samples so
CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442
[ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called,
the hw_base will keep the same when buffer stall happens at long as
the interval between each HWSYNC call is shorter than half of buffer
time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr
value is fixed in this corner case and user space program should be
aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584
[ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488
[ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392
[ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
...
[ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1589776238-23877-1-git-send-email-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0cb099062 upstream.
The ST Audio ADCIII is an STDSP24 card plus extension box. With commit
e8a91ae18b ("ALSA: ice1712: Add support for STAudio ADCIII") we
enabled the ADCIII ports using the model=staudio option but forgot
this part to ensure the STDSP24 card is initialized properly.
Fixes: e8a91ae18b ("ALSA: ice1712: Add support for STAudio ADCIII")
Signed-off-by: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934
Link: https://lore.kernel.org/r/20200518175728.28766-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37486135d3 upstream.
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.
In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.
While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys.
Cc: stable@vger.kernel.org
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e43342b46 ]
The ASUS laptop GL503VM with ALC295 can't detect the headset microphone.
The headset microphone does not work until pin 0x19 is enabled for it.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14425f1f52 ]
Some models of the Samsung Notebook 9 have very quiet and distorted
headphone output. This quirk changes the VREF value of the ALC298
codec NID 0x1a from default HIZ to new 100.
[ adjusted to 5.7-base and rearranged in SSID order -- tiwai ]
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Link: https://lore.kernel.org/r/20200510032838.1989130-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24164f434d ]
HP new platform has new mute led feature.
COEF index 0x34 bit 5 to control playback mute led.
COEF index 0x35 bit 2 and bit 3 to control Mic mute led.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 431e76c3ed ]
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a462be52f ]
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a71821f12 ]
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50e36be1fb ]
The current implementations of the rb_first() and rb_last() gdb
functions have a variable that references itself in its instanciation,
which causes the function to throw an error if a specific condition on
the argument is met. The original author rather intended to reference
the argument and made a typo. Referring the argument instead makes the
function work as intended.
Signed-off-by: Aymeric Agon-Rambosson <aymeric.agon@yandex.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8101b5a153 ]
Stephen reported the following build warning on a ARM multi_v7_defconfig
build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~
introduced by commit a08971e948 ("futex: arch_futex_atomic_op_inuser()
calling conventions change").
While that change should not make any difference it confuses GCC which
fails to work out that oldval is not referenced when the return value is
not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the
early return, the issue is with the assembly macros. GCC fails to detect
that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT
which makes oldval uninteresting. The store to the callsite supplied oldval
pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it
removes the conditional from the fastpath. In the error case the stored
value is uninteresting and the extra store does not matter at all.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ffdaf9155 ]
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6142dd511 ]
[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors
[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f44a4d7e4f ]
The update_domain() function is expected to also inform the hardware
about domain changes. This needs a COMPLETION_WAIT command to be sent
to all IOMMUs which use the domain.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-4-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bd12da7f5 ]
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac854131d9 ]
The syzbot fuzzer found a race between URB submission to endpoint 0
and device reset. Namely, during the reset we call usb_ep0_reinit()
because the characteristics of ep0 may have changed (if the reset
follows a firmware update, for example). While usb_ep0_reinit() is
running there is a brief period during which the pointers stored in
udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is
submitted to ep0 during that period, usb_urb_ep_type_check() will
report it as a driver bug. In the absence of those pointers, the
routine thinks that the endpoint doesn't exist. The log message looks
like this:
------------[ cut here ]------------
usb 2-1: BOGUS urb xfer, pipe 2 != type 2
WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478
usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a
questionable thing to do, it shouldn't count as a driver bug as severe
as submitting an URB for an endpoint that doesn't exist. Indeed,
endpoint 0 always exists, even while the device is in its unconfigured
state.
To prevent these misleading driver bug reports, this patch updates
usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[]
pointers when the endpoint being disabled is ep0. There's no danger
of leaving a stale pointer in place, because the usb_host_endpoint
structure being pointed to is stored permanently in udev->ep0; it
doesn't get deallocated until the entire usb_device structure does.
Reported-and-tested-by: syzbot+db339689b2101f6f6071@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2005011558590.903-100000@netrider.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42234ffd5 ]
The paranoidal pointer check in IRQ handler looks very strange - it
really protects us only against bogus drivers which request IRQ line
with null pointer dev_id. However, the code fragment is incorrect
because the dev pointer is used before the actual check which leads
to undefined behavior. Remove the check to avoid confusing people
with incorrect code.
Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d8e28ff31 ]
If the ceph_mdsc_open_export_target_session() return fails, it will
do a "goto retry", but the session mutex has already been unlocked.
Re-lock the mutex in that case to ensure that we don't unlock it
twice.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e189f2670 ]
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 846c68f7f1 ]
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI
flag since it returns multipart message.
This patch adds a new arg "flags" in gtp_genl_fill_info() so that
flags can be set by the callers.
Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c84cb3735f ]
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.
The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.
Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.
Mark the deadline timer check related functions and data __init while at
it.
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b730d66813 ]
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered. The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself. As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported. Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c6cea0b3 ]
During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab5130186d ]
As an optimization, cpa_flush() was changed to optionally only flush
the range in @cpa if it was small enough. However, this range does
not include any direct map aliases changed in cpa_process_alias(). So
small set_memory_() calls that touch that alias don't get the direct
map changes flushed. This situation can happen when the virtual
address taking variants are passed an address in vmalloc or modules
space.
In these cases, force a full TLB flush.
Note this issue does not extend to cases where the set_memory_() calls are
passed a direct map address, or page array, etc, as the primary target. In
those cases the direct map would be flushed.
Fixes: 935f583982 ("x86/mm/cpa: Optimize cpa_flush_array() TLB invalidation")
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200424105343.GA20730@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 538f67407e ]
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.
More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.html
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caec66198d ]
This fixes the following build warning in ena_xdp_set(), which is
observed on aarch64 with 64KB page size.
In file included from ./include/net/inet_sock.h:19,
from ./include/net/ip.h:27,
from drivers/net/ethernet/amazon/ena/ena_netdev.c:46:
drivers/net/ethernet/amazon/ena/ena_netdev.c: In function \
‘ena_xdp_set’: \
drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning: \
format ‘%lu’ \
expects argument of type ‘long unsigned int’, but argument 4 \
has type ‘int’ \
[-Wformat=] "Failed to set xdp program, the current MTU (%d) is \
larger than the maximum allowed MTU (%lu) while xdp is on",
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7706b0a76a ]
If a component fails to bind due to -EPROBE_DEFER we should not log an
error as this is not a real failure.
Fixes messages like:
vc4-drm soc:gpu: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517
vc4-drm soc:gpu: master bind failed: -517
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20200411190241.89404-1-james.hilliard1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6de556c310 ]
The Aquantia AQC100 controller enables a SFP+ port, so the driver should
configure the media type as '_TYPE_FIBRE' instead of '_TYPE_TP'.
Signed-off-by: Richard Clark <richard.xnu.clark@gmail.com>
Cc: Igor Russkikh <irusskikh@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 107bc0766b ]
We want to deliver packets to monitoring devices before it is
put in the virtqueue, to avoid that replies can appear in the
packet capture before the transmitted packet.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aebfffacf ]
configfs_rmdir() invokes configfs_get_config_item(), which returns a
reference of the specified config_item object to "parent_item" with
increased refcnt.
When configfs_rmdir() returns, local variable "parent_item" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
configfs_rmdir(). When down_write_killable() fails, the function forgets
to decrease the refcnt increased by configfs_get_config_item(), causing
a refcnt leak.
Fix this issue by calling config_item_put() when down_write_killable()
fails.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45a76264c2 ]
In NPIV environment, a NPIV host may use a queue pair created by base host
or other NPIVs, so the check for a queue pair created by this NPIV is not
correct, and can cause an abort to fail, which in turn means the NVME
command not returned. This leads to hang in nvme_fc layer in
nvme_fc_delete_association() which waits for all I/Os to be returned, which
is seen as hang in the application.
Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilya Dryomov