[ Upstream commit 98749b7188 ]
If register_netdev(dev) fails, free_netdev(dev) needs
to be called, otherwise a memory leak will occur.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 454b0289c6 ]
The pages backing page-table allocations for SRMMU are allocated via
memblock as part of the "nocache" region initialisation during
srmmu_paging_init() and should not be freed even if a later call to
pgtable_pte_page_ctor() fails.
Remove the broken call to __free_page().
Cc: David S. Miller <davem@davemloft.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Fixes: 1ae9ae5f7d ("sparc: handle pgtable_page_ctor() fail")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca162ce981 ]
Even in failed case of pm_runtime_get_sync(), the usage_count is
incremented. In order to keep the usage_count with correct value call
appropriate pm_runtime_put().
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5470e0c2 ]
'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
if (fadump_reserve_mem() == 0)
reserve_crashkernel();
...
/* Ensure that total memory size is page-aligned. */
limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaa3aef34d ]
If we mount a very specific DFS link
\\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than
FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to
\FOO\share1 but server->hostname will have "FOO.COM". The reason is
because both "FS0" and "FS0.FOO.COM" resolve to same IP address and
they share same TCP server connection, but "FS0.FOO.COM" was the first
hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good
connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success
if (rc) {
...
reconn_inval_dfs_target(server, cifs_sb, &tgt_list,
&tgt_it);
...
}
...
it successfully reconnects to "FS0" server but does not set up next
DFS target - which should be the same target server "\FS0\share1" -
and server->hostname remains set to "FS0.FOO.COM" rather than "FS0",
as reconn_inval_dfs_target() would have it set to "FS0" if called
earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail
because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS
target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before
generic_ip_connect() so server->hostname will get updated correctly
prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover"
patch
- The above problem would not occur.
- We could save an DNS query to find out that they both resolve to
the same ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b8e125e21 ]
kobject_init_and_add() takes reference even when it fails. If this
function returns an error, kobject_put() must be called to properly clean
up the memory associated with the object. Previous
commit b8eb718348 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.
Link: https://lore.kernel.org/r/20200528030231.9082-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5095eebe ]
Versions of VMD with the Host Physical Address shadow register use this
register to calculate the bus address offset needed to do guest
passthrough of the domain. This register shadows the Host Physical
Address registers including the resource type bits. After calculating
the offset, the extra resource type bits lead to the VMD resources being
over-provisioned at the front and under-provisioned at the back.
Example:
pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit]
Expected:
pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit]
If other devices are mapped in the over-provisioned front, it could lead
to resource conflict issues with VMD or those devices.
Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com
Fixes: a1a3017013 ("PCI: vmd: Fix shadow offsets to reflect spec changes")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4abc6b12e ]
nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the
refcount of the "c->cn_xprt".
The reference counting issue happens in one exception handling path of
nfsd4_process_cb_update(). When setup callback client failed, the
function forgets to decrease the refcnt increased by svc_xprt_get(),
causing a refcnt leak.
Fix this issue by calling svc_xprt_put() when setup callback client
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ac18eead ]
Commit 2b206ee6b0 ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.
For example:
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Getting these large values in case we do -I.
As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.
This patch removes part where we set event_count to 0 in function
'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count
to the raw value at the time of initialization to print change value.
With this patch
In power9 platform
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Suggested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d246a30615 ]
The commit citied in the Fixes line wasn't complete and solved
only part of the problems. Update the mlx5_ib to properly support
MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when
modify the QP tx_port_affinity.
Fixes: 819f7427ba ("RDMA/mlx5: Add init2init as a modify command")
Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a403bbab1a ]
Fixes an issue leading to having all clocks following a critical
clocks marked as well as criticals.
Fixes: fa6415affe ("clk: st: clk-flexgen: Detect critical clocks")
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lkml.kernel.org/r/20200322140740.3970-1-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ae6a6a915 ]
vhost-scsi pre-allocates the maximum sg entries per command and if a
command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that
command is failed by it. This patch lets vhost communicate the max sg limit
when it registers vhost_scsi_ops with TCM. With this change, TCM would
report the max sg entries through "Block Limits" VPD page which will be
typically queried by the SCSI initiator during device discovery. By knowing
this limit, the initiator could ensure the maximum transfer length is less
than or equal to what is reported by vhost-scsi.
Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerselvam@oracle.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7217e6e694 ]
In order to create or activate a new node, lpfc_els_unsol_buffer() invokes
lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will
return a reference of the specified lpfc_nodelist object to "ndlp" with
increased refcnt.
When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to
decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or
lpfc_nlp_get(), causing a refcnt leak.
Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS.
Link: https://lore.kernel.org/r/1590416184-52592-1-git-send-email-xiyuyang19@fudan.edu.cn
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6170a49c5 ]
There wasn't any clean up done if cxgb3_alloc_atid() failed and also the
original code didn't release "csk->l2t".
Link: https://lore.kernel.org/r/20200521121221.GA247492@mwanda
Fixes: 6f7efaabef ("[SCSI] cxgb3i: change cxgb3i to use libcxgbi")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f9b5428b ]
WM8994 chip has built-in regulators, which might be used for chip
operation. They are controlled by a separate wm8994-regulator driver,
which should be loaded before this driver calls regulator_get(), because
that driver also provides consumer-supply mapping for the them. If that
driver is not yet loaded, regulator core substitute them with dummy
regulator, what breaks chip operation, because the built-in regulators are
never enabled. Fix this by annotating this driver with MODULE_SOFTDEP()
"pre" dependency to "wm8994_regulator" module.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3af4786eb4 ]
For platforms using shared.c (4xx, Book3e, Book3s/32), also handle the
_PAGE_COHERENT flag which corresponds to the M bit of the WIMG flags.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Make it more verbose, use "coherent" rather than "m"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/324c3d860717e8e91fca3bb6c0f8b23e1644a404.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c73bc5219 ]
The threaded interrupt handler may still be called after the
usb_gadget_disconnect is called, it causes the structures used
at interrupt handler was freed before it uses, eg the
usb_request. This issue usually occurs we remove the udc function
during the transfer. Below is the example when doing stress
test for android switch function, the EP0's request is freed
by .unbind (configfs_composite_unbind -> composite_dev_cleanup),
but the threaded handler accesses this request during handling
setup packet request.
In fact, there is no protection between unbind the udc
and udc interrupt handling, so we have to avoid the interrupt
handler is occurred or scheduled during the .unbind flow.
init: Sending signal 9 to service 'adbd' (pid 18077) process group...
android_work: did not send uevent (0 0 000000007bec2039)
libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 6ms
init: Service 'adbd' (pid 18077) received signal 9
init: Sending signal 9 to service 'adbd' (pid 18077) process group...
libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 0ms
init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:14)
init: Received control message 'start' for 'adbd' from pid: 399 (/vendor/bin/hw/android.hardware.usb@1.
init: starting service 'adbd'...
read descriptors
read strings
Unable to handle kernel read from unreadable memory at virtual address 000000000000002a
android_work: sent uevent USB_STATE=CONNECTED
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e97f1000
using random self ethernet address
[000000000000002a] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 232 Comm: irq/68-5b110000 Not tainted 5.4.24-06075-g94a6b52b5815 #92
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 00400085 (nzcv daIf +PAN -UAO)
using random host ethernet address
pc : composite_setup+0x5c/0x1730
lr : android_setup+0xc0/0x148
sp : ffff80001349bba0
x29: ffff80001349bba0 x28: ffff00083a50da00
x27: ffff8000124e6000 x26: ffff800010177950
x25: 0000000000000040 x24: ffff000834e18010
x23: 0000000000000000 x22: 0000000000000000
x21: ffff00083a50da00 x20: ffff00082e75ec40
x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fb58 x10: 0000000000000040
x9 : ffff8000120fc980 x8 : 0000000000000000
x7 : ffff00083f98df50 x6 : 0000000000000100
x5 : 00000307e8978431 x4 : ffff800011386788
x3 : 0000000000000000 x2 : ffff800012342000
x1 : 0000000000000000 x0 : ffff800010c6d3a0
Call trace:
composite_setup+0x5c/0x1730
android_setup+0xc0/0x148
cdns3_ep0_delegate_req+0x64/0x90
cdns3_check_ep0_interrupt_proceed+0x384/0x738
cdns3_device_thread_irq_handler+0x124/0x6e0
cdns3_thread_irq+0x94/0xa0
irq_thread_fn+0x30/0xa0
irq_thread+0x150/0x248
kthread+0xfc/0x128
ret_from_fork+0x10/0x18
Code: 910e8000 f9400693 12001ed7 79400f79 (3940aa61)
---[ end trace c685db37f8773fba ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 494a94e38d ]
Add missed acpi_gpiochip_free_interrupts() call when unregistering ports.
While at it, drop extra check to call acpi_gpiochip_request_interrupts().
There is no need to have an additional check to call
acpi_gpiochip_request_interrupts(). Even without any interrupts available
the registered ACPI Event handlers can be useful for debugging purposes.
Fixes: e6cb3486f5 ("gpio: dwapb: add gpio-signaled acpi event support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200519131233.59032-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c88d191817 ]
This patch fixes two bit conflicts in the pci-bridge-emul driver:
1. Bit 3 of Device Status (19 of Device Control) is marked as both
Write-1-to-Clear and Read-Only. It should be Write-1-to-Clear.
The Read-Only and Reserved bitmasks are shifted by 1 bit due to this
error.
2. Bit 12 of Slot Control is marked as both Read-Write and Reserved.
It should be Read-Write.
Link: https://lore.kernel.org/r/20200511162117.6674-2-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16b9ed61e ]
We found out that after phy up, the hardware reports another oob interrupt
but did not follow a phy up interrupt:
oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout
We run link reset when wait phy up timeout, and it send a normal disk into
reset processing. So we made some circumvention action in the code, so that
this abnormal oob interrupt will not start the timer to wait for phy up.
Link: https://lore.kernel.org/r/1589552025-165012-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 819f7427ba ]
Missing INIT2INIT entry in the list of modify commands caused DEVX
applications to be unable to modify_qp for this transition state. Add the
MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
Fixes: e662e14d80 ("IB/mlx5: Add DEVX support for modify and query commands")
Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 347adb0d63 ]
On some QCOM platforms like SC7180, SDM845 and SM8150,
reading TMC mode register without proper coresight power
management can lead to async exceptions like the one in
the call trace below in tmc_read_prepare_etb(). This can
happen if the user tries to read the TMC etf data via
device node without setting up source and the sink first.
Fix this by having a check for coresight sysfs mode
before reading TMC mode management register.
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122
Call trace:
dump_backtrace+0x0/0x188
show_stack+0x20/0x2c
dump_stack+0xdc/0x144
panic+0x168/0x36c
panic+0x0/0x36c
arm64_serror_panic+0x78/0x84
do_serror+0x130/0x138
el1_error+0x84/0xf8
tmc_read_prepare_etb+0x88/0xb8
tmc_open+0x40/0xd8
misc_open+0x120/0x158
chrdev_open+0xb8/0x1a4
do_dentry_open+0x268/0x3a0
vfs_open+0x34/0x40
path_openat+0x39c/0xdf4
do_filp_open+0x90/0x10c
do_sys_open+0x150/0x3e8
__arm64_compat_sys_openat+0x28/0x34
el0_svc_common+0xa8/0x160
el0_svc_compat_handler+0x2c/0x38
el0_svc_compat+0x8/0x10
Fixes: 4525412a50 ("coresight: tmc: making prepare/unprepare functions generic")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb5cce12ac ]
The Arm Ltd. boards were using an outdated address convention in the DT
node names, by separating the high from the low 32-bits of an address by
a comma.
Remove the comma from the node name suffix to be DT spec compliant.
Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90c6cb4a35 ]
Trying to change Link Status register does not have any effect as this
is a read-only register. Trying to overwrite bits for Negotiated Link
Width does not make sense.
In future proper change of link width can be done via Lane Count Select
bits in PCIe Control 0 register.
Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link
Control register is wrong. There should be at least some detection if
endpoint supports L0s as isn't mandatory.
Moreover ASPM Control bits in Link Control register are controlled by
pcie/aspm.c code which sets it according to system ASPM settings,
immediately after aardvark driver probes. So setting these bits by
aardvark driver has no long running effect.
Remove code which touches ASPM L0s bits from this driver and let
kernel's ASPM implementation to set ASPM state properly.
Some users are reporting issues that this code is problematic for some
Intel wifi cards and removing it fixes them, see e.g.:
https://bugzilla.kernel.org/show_bug.cgi?id=196339
If problems with Intel wifi cards occur even after this commit, then
pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state
for affected problematic cards.
Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78631aecc5 ]
The GIC DT nodes for the fastmodels were not fully compliant with the
DT binding, which has certain expectations about child nodes and their
size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Since the .dts files share interrupt nexus nodes across different
interrupt controllers (GICv2 vs. GICv3), we need to use the only
commonly allowed #address-size value of <1> for both.
Link: https://lore.kernel.org/r/20200513103016.130417-11-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c26fde3b15 ]
This provides a better separation between runtime and PM sleep
callbacks.
Only do nothing if given runtime flag is set and calback is not set.
With the current implementation, if PM sleep callback is set but runtime
callback is not set then at runtime resume we reload the firmware even
if we do not support runtime resume callback.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ace3420977 ]
On SoCs with Standby Control Registers (STBCRs) instead of Module Stop
Control Registers (MSTPCRs), the suspend handler saves the wrong
registers, and the resume handler prints the wrong register in an error
message.
Fortunately this cannot happen yet, as the suspend/resume code is used
on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not
use PSCI. Still, it is better to fix this, to avoid this becoming a
problem in the future.
Distinguish between STBCRs and MSTPCRs where needed. Replace the
useless printing of the virtual register address in the resume error
message by printing the register index.
Fixes: fde35c9c7d ("clk: renesas: cpg-mssr: Add R7S9210 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200507074713.30113-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b47afc654 ]
This fixes a problem with using the GPIO as an interrupt on Jaguar2
(and similar), as the register layout of the platforms with 64 GPIO's
are pairwise, such that the original offset must be multiplied with
the platform stride.
Fixes: da801ab56a pinctrl: ocelot: add MSCC Jaguar2 support.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200513125532.24585-4-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a78aee9e43 ]
The GIC DT nodes for the Juno boards were not fully compliant with
the DT binding, which has certain expectations about child nodes and
their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Link: https://lore.kernel.org/r/20200513103016.130417-10-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2671acbbb ]
The sfp compatible should be 'sff,sfp', not 'sff,sfp+'. We used patched
kernel where the latter was working.
Fixes: 7109d817db ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2361ae5953 ]
SCSI LUN passthrough code such as qemu's "scsi-block" device model
pass every IO to the host via SG_IO ioctls. Currently, dm-multipath
calls choose_pgpath() only in the block IO code path, not in the ioctl
code path (unless current_pgpath is NULL). This has the effect that no
path switching and thus no load balancing is done for SCSI-passthrough
IO, unless the active path fails.
Fix this by using the same logic in multipath_prepare_ioctl() as in
multipath_clone_and_map().
Note: The allegedly best path selection algorithm, service-time,
still wouldn't work perfectly, because the io size of the current
request is always set to 0. Changing that for the IO passthrough
case would require the ioctl cmd and arg to be passed to dm's
prepare_ioctl() method.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74003385cf ]
fastrpc_invoke_ctx can have refcount of 2 in error path where
rpmsg_send() fails to send invoke message. decrement the refcount
properly in the error path to fix this leak.
This also fixes below static checker warning:
drivers/misc/fastrpc.c:990 fastrpc_internal_invoke()
warn: 'ctx->refcount.refcount.ref.counter' not decremented on lines: 990.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200512110930.2550-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0978de9fc7 ]
fastrpc_channel_ctx is not freed if misc_register() fails, this would
lead to a memory leak. Fix this leak by adding kfree in misc_register()
error path.
Fixes: 278d56f970 ("misc: fastrpc: Reference count channel context")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200511162722.2552-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b668c064e ]
Standard 8250 UART ports are designed in a way so they can communicate
with baud rates up to 1/16 of a reference frequency. It's expected from
most of the currently supported UART controllers. That's why the former
version of serial8250_get_baud_rate() method called uart_get_baud_rate()
with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX)
and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like
it was suggested in commit ("serial: 8250_mtk: support big baud rate."),
caused acceptance of bauds, which was higher than the normal UART
controllers actually supported. As a result if some user-space program
requested to set a baud greater than (uartclk / 16) it would have been
permitted without truncation, but then serial8250_get_divisor(baud)
(which calls uart_get_divisor() to get the reference clock divisor) would
have returned a zero divisor. Setting zero divisor will cause an
unpredictable effect varying from chip to chip. In case of DW APB UART the
communications just stop.
Lets fix this problem by getting back the limitation of (uartclk +
tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek
8250 UART ports driver developer shouldn't have touched it in the first
place notably seeing he already provided a custom version of set_termios()
callback in that glue-driver which took into account the extended baud
rate values and accordingly updated the standard and vendor-specific
divisor latch registers anyway.
Fixes: 81bb549fdf ("serial: 8250_mtk: support big baud rate.")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Long Cheng <long.cheng@mediatek.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200506233136.11842-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e47bd937e6 ]
The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must
be kept enabled all the time to allow proper access to power management
control for the ISP and CAM power domains. The last two clocks, although
related to GScaler device and GSCL power domain, provides also the
I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power
domain and are needed for proper power on/off sequence.
Currently there are no drivers for the devices, which are part of CAM and
ISP power domains yet. This patch only fixes the race between disabling
the unused power domains and disabling unused clocks, which randomly
resulted in the following error during boot:
Power domain CAM disable failed
Power domain ISP disable failed
Fixes: 318fa46cc6 ("clk/samsung: exynos542x: mark some clocks as critical")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be050a3429 ]
The application processor accessing the mpss region when the Q6 modem is
running will lead to an XPU violation. Fix this by un-mapping the mpss
segments post copy during mpss authentication and coredumps.
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415071619.6052-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81c979f4e ]
If we timeout during a message transfer, the control register may
contain bits that cause an action to be set. Read-modify-writing the
register leaving these bits set may trigger the hardware to attempt
one of these actions unintentionally.
Always clear these bits when cleaning up after a message or after
a timeout.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baaa7ebf25 ]
This reserved space isn't committed yet but cannot be used for
allocations. For userspace it has no difference from used space.
See the same fix in ext4 commit f06925c739 ("ext4: report delalloc
reserve as non-free in statfs for project quota").
Fixes: ddc34e328d ("f2fs: introduce f2fs_statfs_project")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dee2dabc0e ]
Limit the output of humidity compensation to the range between 0 and 100
percent.
Depending on the calibration parameters of the individual sensor it
happens, that a humidity above 100 percent or below 0 percent is
calculated, which don't make sense in terms of relative humidity.
Add a clamp to the compensation formula as described in the datasheet of
the sensor in chapter 4.2.3.
Although this clamp is documented, it was never in the driver of the
kernel.
It depends on the circumstances (calibration parameters, temperature,
humidity) if one can see a value above 100 percent without the clamp.
The writer of this patch was working with this type of sensor without
noting this error. So it seems to be a rare event when this bug occures.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8816cd726a ]
In function mc13xxx_rtc_probe, the mc13xxx_unlock() is called
before rtc_register_device(). But in the error path of
rtc_register_device(), the mc13xxx_unlock() is called again,
which causes a double-unlock problem. Thus add a call of the
function “mc13xxx_lock” in an if branch for the completion
of the exception handling.
Fixes: e4ae7023e1 ("rtc: mc13xxx: set range")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200503182235.1652-1-wu000273@umn.edu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 255cdaf734 ]
Since commit b6eba86030 ("Input: edt-ft5x06 - add offset support for
ev-ft5726") offset-x and offset-y is supported. Devices using those
offset parameters don't support the offset parameter so we need to add
the NO_REGISTER check for edt_ft5x06_ts_get_defaults().
Fixes: b6eba86030 ("Input: edt-ft5x06 - add offset support for ev-ft5726")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Hai