* pm-cpuidle:
cpuidle: poll_state: Avoid invoking local_clock() too often
PM: cpuidle/suspend: Add s2idle usage and time state attributes
cpuidle: Enable coupled cpuidle support on Exynos3250 platform
cpuidle: poll_state: Add time limit to poll_idle()
ARM: cpuidle: Drop memory allocation error message from arm_idle_init_cpu()
* pm-tools:
pm-graph: AnalyzeSuspend v5.0
pm-graph: AnalyzeBoot v2.2
pm-graph: config files and installer
* acpi-battery:
Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk"
ACPI: battery: do not export degraded capacity values over 100
ACPI: battery: make function __battery_hook_unregister() static
ACPI: battery: Add the ThinkPad "Not Charging" quirk
thinkpad_acpi: Add support for battery thresholds
power: add to_power_supply macro to the API
battery: Add the battery hooking API
* acpi-doc:
ACPI: sysfs: Update device object sysfs documentation
* acpi-pmic:
ACPI / PMIC: Replace license boilerplate with SPDX license identifier
Currently the only way to specify a hibernate offset for a
swap file is on the kernel command line.
Add a new /sys/power/resume_offset that lets userspace
specify the offset and disk to use when initiating a hibernate
cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new attribute group called "s2idle" under the sysfs directory
of each cpuidle state that supports the ->enter_s2idle callback
and put two new attributes, "usage" and "time", into that group to
represent the number of times the given state was requested for
suspend-to-idle and the total time spent in suspend-to-idle after
requesting that state, respectively.
That will allow diagnostic information related to suspend-to-idle
to be collected without enabling advanced debug features and
analyzing dmesg output.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The existing BPRM_CHECK functionality in IMA validates against the
credentials of the existing process, not any new credentials that the
child process may transition to. Add an additional CREDS_CHECK target
and refactor IMA to pass the appropriate creds structure. In
ima_bprm_check(), check with both the existing process credentials and
the credentials that will be committed when the new process is started.
This will not change behaviour unless the system policy is extended to
include CREDS_CHECK targets - BPRM_CHECK will continue to check the same
credentials that it did previously.
After this patch, an IMA policy rule along the lines of:
measure func=CREDS_CHECK subj_type=unconfined_t
will trigger if a process is executed and runs as unconfined_t, ignoring
the context of the parent process. This is in contrast to:
measure func=BPRM_CHECK subj_type=unconfined_t
which will trigger if the process that calls exec() is already executing
in unconfined_t, ignoring the context that the child process executes
into.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Changelog:
- initialize ima_creds_status
Document the core of the debugfs CEC error injection ABI.
The driver specific commands are documented elsewhere and
this file points to that documentation.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
USB role switch is a device that can be used to choose the
data role for USB connector. With dual-role capable USB
controllers, the controller itself will be the switch, but
on some platforms the USB host and device controllers are
separate IPs and there is a mux between them and the
connector. On those platforms the mux driver will need to
register the switch.
With USB Type-C connectors, the host-to-device relationship
is negotiated over the Configuration Channel (CC). That
means the USB Type-C drivers need to be in control of the
role switch. The class provides a simple API for the USB
Type-C drivers for the control.
For other types of USB connectors (mainly microAB) the class
provides user space control via sysfs attribute file that
can be used to request role swapping from the switch.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some userspace applications information on the number of
over-current conditions at specific USB hub ports is relevant.
In our case we have a series of USB hardware (using the cp210x driver)
which communicates using a proprietary protocol. These devices sometimes
trigger an over-current situation on some hubs. In case of such an
over-current situation the USB devices offer an interface for reducing
the max used power. As these conditions are quite rare and imply
performance reductions of the device we don't want to reduce the max
power always.
Therefore give user-space applications the possibility to react
adequately by introducing an over_current_counter in the usb port struct
which is exported via sysfs.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UFS host controllers may support an autonomous power management feature
called the Auto-Hibernate Idle Timer. The timer is set to the number of
microseconds of idle time before the UFS host controller will autonomously
put the link into Hibernate state. That will save power at the expense of
increased latency. Any access to the host controller interface registers
will automatically put the link out of Hibernate state. So once configured,
the feature is transparent to the driver.
Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to
choose between power efficiency or lower latency. Set a default value of
150 ms.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Read from these files will return the integer value of the chosen power
management level now. Separate entries were added to show the target UFS
device and UIC link states. The description of the possible power
managements levels was added to the ABI file. The on-write behaviour of
these entries wasn't changed.
[mkp: typo]
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Descriptions have been collected from git commit logs, code commits and
the TrackPoint System Version 4.0 Engineering Specification.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Descriptions have collected from code comments and by reading through
code.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This is an attempt to document the nfit sysfs interface. The
descriptions have been collected from git commit logs and the ACPI
specification 6.2.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The existing sysfs interface has been updated to be in the same format
as described in Documentation/ABI/README. This will be useful for
scripting and tracking changes in the ABI. Attributes have been grouped
by functionality and/or the date on which they were added.
There are a couple of more changes:
- The attributes have been annotated with file permissions RO/RW/WO.
- Added description of the bus attribute supported_features
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Introduce a driver for the ACPI Time and Alarm Device (TAD) based on
Section 9.18 of ACPI 6.2.
This driver only supports the system wakeup capabilities of the TAD
which are mandatory. Support for the RTC capabilities of the TAD
will be added to it in the future.
This driver is entirely sysfs-based. It provides attributes (under
the TAD platform device) to allow user space to manage the AC and DC
wakeup timers of the TAD: set and read their values, set and check
their expire timer wake policies, check and clear their status and
check the capabilities of the TAD reported by AML. The DC timer
attributes are only present if the TAD supports a separate DC alarm
timer.
The wakeup events handling and power management of the TAD is
expected to be taken care of by the ACPI PM domain attached to its
platform device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
New features:
- Intel Titan Ridge Thunderbolt 3 controller support
- Preboot ACL supported, allowing more secure way to boot from
Thunderbolt devices
- New "USB only" security level
In addition there are a couple of fixes for increasing timeout when
authenticating the ICM firmware and reading root switch config space.
Preventing a crash on certain Lenovo systems where ICM firmware for some
reason is not always properly starting up.
-----BEGIN PGP SIGNATURE-----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=3yu4
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next
Mike writes:
thunderbolt: Changes for v4.17 merge window
New features:
- Intel Titan Ridge Thunderbolt 3 controller support
- Preboot ACL supported, allowing more secure way to boot from
Thunderbolt devices
- New "USB only" security level
In addition there are a couple of fixes for increasing timeout when
authenticating the ICM firmware and reading root switch config space.
Preventing a crash on certain Lenovo systems where ICM firmware for some
reason is not always properly starting up.
Pull libata fixes from Tejun Heo:
"I sat on them too long and it's quite a few this late, but nothing has
a wide blast area. The changes are...
- Fix corner cases in SG command handling.
- Recent introduction of default powersaving mode config option
exposed several devices with broken powersaving behaviors. A number
of patches to update the blacklist accordingly.
- Fix a kernel panic on SAS hotplug.
- Other misc and device specific updates"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Enable queued TRIM for Samsung SSD 860
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
ata: do not schedule hot plug if it is a sas host
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: update documentation for sysfs interfaces
ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
libata: transport: cleanup documentation of sysfs interface
sata_rcar: Reset SATA PHY when Salvator-X board resumes
libata: don't try to pass through NCQ commands to non-NCQ devices
libata: remove WARN() for DMA or PIO command without data
libata: fix length validation of ATAPI-relayed SCSI commands
ata: libahci: fix comment indentation
ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
libata: Fix compile warning with ATA_DEBUG enabled
Add a way for drivers to inform the core of the supported date/time range.
The core can then check whether the date/time or alarm is in the range
before calling ->set_time, ->set_mmss or ->set_alarm. It returns -ERANGE
when the time is out of range.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Limit the number of queued writes per client.
Writes above this threshold are blocked till place
in the transmit queue is available.
The limit is configurable via sysfs and defaults to 50.
The implementation should provide blocking I/O behavior.
Prior to this change one would end up in the hands of OOM.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change introduces an 'external mode' for GPIO-based FSI masters,
allowing the clock and data lines to be driven by an external source.
For example, external mode is selected by a user when an external debug
device is attached to the FSI pins.
To do this, we need to set specific states for the trans, mux and enable
GPIOs, and prevent access to clk & data from the FSI core code (by
returning EBUSY).
External mode is controlled by a sysfs attribute, so add the relevant
information to Documentation/ABI/
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch supports to recognize hot file extension in f2fs, so that we
can allocate proper hot segment location for its data, which can lead to
better hot/cold seperation in filesystem.
In addition, we changes a bit on query/add/del operation method for
extension_list sysfs entry as below:
- Query: cat /sys/fs/f2fs/<disk>/extension_list
- Add: echo 'extension' > /sys/fs/f2fs/<disk>/extension_list
- Del: echo '!extension' > /sys/fs/f2fs/<disk>/extension_list
- Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list
- Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list
- [h] means add/del hot file extension
- [c] means add/del cold file extension
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This new security level works so that it creates one PCIe tunnel to the
connected Thunderbolt dock, removing PCIe links downstream of the dock.
This leaves only the internal USB controller visible.
Display Port tunnels are created normally.
While there make sure security sysfs attribute returns "unknown" for any
future security level.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Preboot ACL is a mechanism that allows connecting Thunderbolt devices
boot time in more secure way than the legacy Thunderbolt boot support.
As with the legacy boot option, this also needs to be enabled from the
BIOS before booting is allowed. Difference to the legacy mode is that
the userspace software explicitly adds device UUIDs by sending a special
message to the ICM firmware. Only the devices listed in the boot ACL are
connected automatically during the boot. This works in both "user" and
"secure" security levels.
We implement this in Linux by exposing a new sysfs attribute (boot_acl)
below each Thunderbolt domain. The userspace software can then update
the full list as needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
In various cases, Thunderbolt device can be connected by ICM on boot
without waiting for approval from user. Most cases are related to
OEM-specific BIOS configurations. This information is interesting for
user-space as if the device isn't in SW ACL, it may create a friction in
the user experience where the device is automatically authorized if it's
connected on boot but requires an explicit user action if connected
after OS is up. User-space can use this information to suggest adding
the device to SW ACL for auto-authorization on later connections.
Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Add sysfs documentation for N-Trig touchscreens under Documentation/ABI.
Descriptions have been collected from code comments.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use sysfs to allow supporting sub-channels. The userspace application
makes request to host to create sub-channels and the UIO kernel
driver populates the sysfs per-channel directory with a binary
attribute file that can be used to read/write ring.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch the parent of the nvmem device to the parent of the rtc device so it
can be registered before the RTC.
This is a small change in the ABI as the nvmem moves out of the
/sys/class/rtc/rtcX folder to be under the parent device folder (that is
where the previous nvram files where registered).
However, it is still available under its correct location,
/sys/bus/nvmem/devices which is the one that should be used by userspace
applications.
The other benefit is that the nvmem device can stay registered even if the
rtc registration fails. Or it is possible to not register the rtc if the
nvmem registration failed.
Finally, it makes a lot of sense for devices that actually have different
i2c or spi addresses for the RTC and the EEPROM. That is basically how it
would end up when using MFD or even completely separate devices.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Surprisingly there is no simple way to see if the IRQ line in question
is wakeup source or not.
Note that wakeup might be an OOB (out-of-band) source like GPIO line
which makes things slightly more complicated.
Add a sysfs node to cover this case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20180226155043.67937-1-andriy.shevchenko@linux.intel.com
This is an attempt to document the sysfs interface for the IPMI drivers.
Descriptions were collected from v2.0 of the IPMI specification and from
code comments.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We want the IIO/Staging fixes in here, and to resolve a merge problem
with the move of the fsl-mc code.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, the description of the rapidio sysfs interfaces is in
Documentation/rapidio/sysfs.txt. Since these are a part of the ABI, they
should be in Documentation/ABI along with the rest.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add documentation for sysfs interface of adp8860 series backlight
devices by reading through code and git commits.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add documentation for sysfs interface of adp5520/adp5501 analog devices
backlight driver by reading code and looking through git commit logs.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add documentation for sysfs interfaces of Texas Instruments lm3639
backlight + flash led driver chip by looking through git commits and
reading code.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Documentation has been compiled from git logs and by reading through
code.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add documentation for core and hardware specific infiniband interfaces.
The descriptions have been collected from git commit logs, reading
through code and data sheets. Some drivers have incomplete doc and are
annotated with the comment '[to be documented]'.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Documentation has been compiled from git commit logs and descriptions in
Documentation/aoe/aoe.txt. This should be useful for scripting and
tracking changes in the ABI.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document sysfs attributes of s6e63m0 lcd panel driver by looking through
git logs and reading code.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Clean up the sysfs documentation such that it is in the same format as
described in Documentation/ABI/README. Mainly, the patch moves the
attribute names to the 'What:' field. This might be useful for scripting
and tracking changes in the ABI.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add documentation for two attributes, status and hrv, in
Documentation/ABI/testing/sysfs-bus-acpi.
Compiled from git logs and the ACPI specification.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
[ rjw: Minor changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Outside of IIO
* Strongly typed 64bit int_sqrt function needed by the mlx90632
New device support
* adc081s
- New driver supporting adc081s, adc101s and adc121s TI ADCs.
* ad5272
- New driver supproting the ad5272 and ad5274 ADI digital potentiometers
with DT bindings.
* axp20x_adc
- support the AXP813 ADC - includes rework patches to prepare for this.
* mlx90632
- New driver with dt bindings for this IR temperature sensor.
Features
* axp20x_adc
- Add DT bindings and probing.
* dht11
- The sensor has a wider range than advertised in the datasheet - support it.
* st_lsm6dsx
- Add hardware timestamp su9pport.
Cleanups
* ABI docs
- Update email contact for Matt Ranostay
* SPDX changes
- Matt Ranostay has moved his drivers over to SPDX. Currently we are making
this an author choice in IIO.
* ad7192
- Disable burnout current on misconfiguration. No actually effect as
they simply won't work otherwise.
* ad7476
- Drop a license definition that was replicating information in SPDX tag.
* ade7758
- Expand buf_lock to cover both buffer and state protection allowing
unintented uses of mlock in the core to be removed.
* ade7759
- Align parameters to opening parenthesis.
* at91_adc
- Depend on sysfs instead of selecting it - for try wide consistency.
* ccs811
- trivial naming type for a define.
* ep93xx
- Drop a redundant return as a result checking platform_get_resource.
* hts221
- Regmap conversion which simplifies the driver somewhat.
- Clean up some restricted endian cast warnings.
- Drop a trailing whitespace from a comment
- Drop an unnecessary get_unaligned by changing to the right 16bit data type.
* ms5611
- Fix coding style in the probe function (whitespace)
* st_accel
- Use strlcpy instead of strncpy to avoid potentially truncating a string.
-----BEGIN PGP SIGNATURE-----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=CH1K
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new devices, features and cleanups for IIO in the 4.17 cycle.
Outside of IIO
* Strongly typed 64bit int_sqrt function needed by the mlx90632
New device support
* adc081s
- New driver supporting adc081s, adc101s and adc121s TI ADCs.
* ad5272
- New driver supproting the ad5272 and ad5274 ADI digital potentiometers
with DT bindings.
* axp20x_adc
- support the AXP813 ADC - includes rework patches to prepare for this.
* mlx90632
- New driver with dt bindings for this IR temperature sensor.
Features
* axp20x_adc
- Add DT bindings and probing.
* dht11
- The sensor has a wider range than advertised in the datasheet - support it.
* st_lsm6dsx
- Add hardware timestamp su9pport.
Cleanups
* ABI docs
- Update email contact for Matt Ranostay
* SPDX changes
- Matt Ranostay has moved his drivers over to SPDX. Currently we are making
this an author choice in IIO.
* ad7192
- Disable burnout current on misconfiguration. No actually effect as
they simply won't work otherwise.
* ad7476
- Drop a license definition that was replicating information in SPDX tag.
* ade7758
- Expand buf_lock to cover both buffer and state protection allowing
unintented uses of mlock in the core to be removed.
* ade7759
- Align parameters to opening parenthesis.
* at91_adc
- Depend on sysfs instead of selecting it - for try wide consistency.
* ccs811
- trivial naming type for a define.
* ep93xx
- Drop a redundant return as a result checking platform_get_resource.
* hts221
- Regmap conversion which simplifies the driver somewhat.
- Clean up some restricted endian cast warnings.
- Drop a trailing whitespace from a comment
- Drop an unnecessary get_unaligned by changing to the right 16bit data type.
* ms5611
- Fix coding style in the probe function (whitespace)
* st_accel
- Use strlcpy instead of strncpy to avoid potentially truncating a string.
Change email contact for ABI documention to author's current employer
on the following files:
* sysfs-bus-iio-chemical-vz89x
* sysfs-bus-iio-proximity-as3935
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch introduces a sysfs group entry for the UFS attributes. The
group adds "attributes" folder under the UFS driver sysfs entry
(/sys/bus/platform/drivers/ufshcd/*). The attributes are shown
as hexadecimal numbers. The full information about the attributes could
be found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS flags. The group adds
"flags" folder under the UFS driver sysfs entry
(/sys/bus/platform/drivers/ufshcd/*). The flags are shown as boolean value
("true" or "false"). The full information about the UFS flags could be
found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS unit descriptor
parameters. The group adds "unit_descriptor" folder under the corresponding
SCSI device sysfs entry (/sys/class/scsi_device/*/device/). The parameters
are shown as hexadecimal numbers. The full information about the parameters
could be found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS string descriptors.
The group adds "string_descriptors" folder under the UFS driver
sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The folder will contain
5 files that will show string values defined by the UFS spec:
a manufacturer name, a product name, an OEM id, a serial number and a
product revision. The full information about the string descriptors
could be found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS power descriptor
parameters. The group adds "power_descriptor" folder under the UFS driver
sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown
as hexadecimal numbers. The full information about the parameters could be
found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS health descriptor
parameters. The group adds "health_descriptor" folder under the UFS driver
sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown
as hexadecimal numbers. The full information about the parameters could be
found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS geometry descriptor
parameters. The group adds "geometry_descriptor" folder under the UFS
driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters
are shown as hexadecimal numbers. The full information about the parameters
could be found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS interconnect
descriptor parameters. The group adds "interconnect_descriptor" folder
under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*).
The parameters are shown as hexadecimal numbers. The full information
about the parameters could be found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch introduces a sysfs group entry for the UFS device descriptor
parameters. The group adds "device_descriptor" folder under the UFS driver
sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown
as hexadecimal numbers. The full information about the parameters could be
found at UFS specifications 2.1.
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Revert a problematic EC driver change from the 4.13 cycle that
introduced a system resume regression on Thinkpad X240 (Rafael
Wysocki).
- Clean up device tables handling in the ACPI core and the related
part of the device properties framework (Andy Shevchenko).
- Update the sysfs ABI documentatio of the dock and the INT3407
special device drivers (Aishwarya Pant).
- Add an expected switch fall-through marker to the SPCR table
parsing code (Gustavo Silva).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=gdK1
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a system resume regression from the 4.13 cycle, clean up
device table handling in the ACPI core, update sysfs ABI documentation
of a couple of drivers and add an expected switch fall-through marker
to the SPCR table parsing code.
Specifics:
- Revert a problematic EC driver change from the 4.13 cycle that
introduced a system resume regression on Thinkpad X240 (Rafael
Wysocki).
- Clean up device tables handling in the ACPI core and the related
part of the device properties framework (Andy Shevchenko).
- Update the sysfs ABI documentatio of the dock and the INT3407
special device drivers (Aishwarya Pant).
- Add an expected switch fall-through marker to the SPCR table
parsing code (Gustavo Silva)"
* tag 'acpi-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: dock: document sysfs interface
ACPI / DPTF: Document dptf_power sysfs atttributes
device property: Constify device_get_match_data()
ACPI / bus: Rename acpi_get_match_data() to acpi_device_get_match_data()
ACPI / bus: Remove checks in acpi_get_match_data()
ACPI / bus: Do not traverse through non-existed device table
ACPI: SPCR: Mark expected switch fall-through in acpi_parse_spcr
ACPI / EC: Restore polling during noirq suspend/resume phases
Dcoumentation has been added by parsing through git commit history and
reading code. This might be useful for scripting and tracking changes in
the ABI.
I do not have complete descriptions for the following 3 attributes; they
have been annotated with the comment [to be documented] -
/sys/class/scsi_host/hostX/ahci_port_cmd
/sys/class/scsi_host/hostX/ahci_host_caps
/sys/class/scsi_host/hostX/ahci_host_cap2
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Clean-up the documentation of sysfs interfaces to be in the same format
as described in Documentation/ABI/README. This will be useful for
tracking changes in the ABI. Attributes are grouped by function (device,
link or port) and then by date added.
This patch also adds documentation for one attribute -
/sys/class/ata_port/ataX/port_no
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Description has been collected from git commit history and reading
through code.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The descriptions have been collected from git commit logs and reading
through code.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update cpuidle documentation using git logs and existing documentation
in Documentation/cpuidle/sysfs.txt. This might be useful for scripting
and tracking changes in the ABI.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New model support added for Dell, Ideapad, Acer, Asus, Thinkpad, and GPD
laptops. Improvements to the common intel-vbtn driver, including tablet
mode, rotate, and front button support. Intel CPU support added for
Cannonlake and platform support for Dollar Cove power button.
Overhaul of the mellanox platform driver, creating a new
platform/mellanox directory for the newly multi-architecture regmap
interface.
Significant Intel PMC update with CannonLake support, Coffeelake update,
CPUID enumeration, module support, new read64 API, refactoring and
cleanups.
Revert the apple-gmux iGP IO lock, addressing reported issues with
non-binary drivers, leaving Nvidia binary driver users to comment out
conflicting code.
Miscellaneous fixes and cleanups.
Previously merged during the 4.15-rc cycle:
- e20a8e771d platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410
- 9cd5cf3710 platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changes
- 91c73e8092 platform/x86: dell-wmi: check for kmalloc() errors
- 9a1a625918 platform/x86: wmi: Call acpi_wmi_init() later
The following is an automated git shortlog grouped by driver:
ACPI / LPIT:
- Export lpit_read_residency_count_address()
Input:
- add KEY_ROTATE_LOCK_TOGGLE
MAINTAINERS:
- Update tree for platform-drivers-x86
x86/cpu:
- Add Cannonlake to Intel family
acer-wireless:
- Add Acer Wireless Radio Control driver
intel_chtdc_ti_pwrbtn:
- Add support for Dollar Cove TI power button
GPD pocket fan:
- Add driver for GPD pocket custom fan controller
- Stop work on suspend
- Use a min-speed of 2 while charging
- Set speed to max on get_temp failure
apple-gmux:
- Revert: lock iGP IO to protect from vgaarb changes
alienware-wmi:
- lightbar LED support for Dell Inspiron 5675
asus-nb-wmi:
- Support ALS on the Zenbook UX430UQ
dell-laptop:
- Allocate buffer on heap rather than globally
- Add 2-in-1 devices to the DMI whitelist
- Filter out spurious keyboard backlight change events
- make some local functions static
- Use bool in struct quirk_entry for true/false fields
dell-smbios:
- Correct notation for filtering
dell-wmi:
- Add an event created by Dell Latitude 5495
Kconfig
- have ACPI_CMPC use depends instead of select for INPUT
ideapad-laptop:
- Add Y720-15IKB to no_hw_rfkill
- add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list
- Use __func__ instead of write_ec_cmd in pr_err
- Remove unnecessary else
intel-hid:
- add a DMI quirk to support Wacom MobileStudio Pro
intel-vbtn:
- Replace License by SDPX identifier
- Remove redundant inclusions
- Support tablet mode switch
- Simplify autorelease logic
- support panel front button
- support KEY_ROTATE_LOCK_TOGGLE
- Support separate press/release events
- support SW_TABLET_MODE
intel_int0002_vgpio:
- Remove IRQF_NO_THREAD irq flag
intel_pmc_core:
- Special case for Coffeelake
- Add CannonLake PCH support
- Read base address from LPIT
- Remove unused header file
- Convert to ICPU macro
- Substitute PCI with CPUID enumeration
- Refactor debugfs entries
- Update Kconfig
- Fix file permission warnings
- Change driver to a module
- Fix kernel doc for pmc_dev
- Remove unused variable
- Remove unused EXPORTED API
intel_pmc_ipc:
- Add read64 API
intel_telemetry:
- Remove redundancies
- Improve S0ix logs
- Fix suspend stats
mlx-platform:
- Fix an ERR_PTR vs NULL issue
- Add hotplug device unregister to error path
- fix module aliases
- Add IO access verification callbacks
- Document pdev_hotplug field
- Allow compilation for 32 bit arch
platform/mellanox:
- mlxreg-hotplug: Add check for negative adapter number
- mlxreg-hotplug: Enable building for ARM
- mlxreg-hotplug: Modify to use a regmap interface
- Group create/destroy with attribute functions
- Rename i2c bus to nr
- mlxreg-hotplug: Remove unused wait.h include
- Move Mellanox platform hotplug driver to platform/mellanox
pmc_atom:
- introduce DEFINE_SHOW_ATTRIBUTE() macro
samsung-laptop:
- Grammar s/are can/can/
silead_dmi:
- Add Teclast X3 Plus tablet support
- Add entry for newer BIOS for Trekstor Surftab 7.0
- Add entry for the Teclast X98 Plus II
- Add entry for the Trekstor Primebook C13
- Add entry for the Chuwi Vi8 tablet
- add entry for Chuwi Hi8 tablet
- Add support for the Onda oBook 20 Plus tablet
- Add touchscreen info for SurfTab twin 10.1
thinkpad_acpi:
- suppress warning about palm detection
- Accept flat mode for type 4 multi mode status
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaegMmAAoJEKbMaAwKp364TvUH/3D9qNtsbXpZuc3ZMNHjIysU
hdW6hOVfBN0Rk049mjw7nWv/udhWZ/6ChJDlXHX0ZugtNGnRnzbdtWGg4y38pDF1
LRuKjWfDeyMeJ11itD2xcxEaE6YsseWCKGZJ5D3T+sN4+1jgS4RLAa9cUJMl8QAo
xZsT1MKpmGuj5eTLf5GgOVL2yfMZhZHabt3kGRY0eQqNqZBgpJw/GQNI1l6v4nAH
MHPA7Gtj4HXHK8jGviZXpD9tg/iwahiUjGugG4HcxbMcpJ96a8CGyeaXmq2FlfNC
/PpmVvhVVqzLuXKWAI+DZFLAiwIvPpxzVfOKF2Lty5Rejxf7pdmHq7aCNcALys0=
=cKm9
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.16-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-driver updates from Darren Hart:
"New model support added for Dell, Ideapad, Acer, Asus, Thinkpad, and
GPD laptops. Improvements to the common intel-vbtn driver, including
tablet mode, rotate, and front button support. Intel CPU support added
for Cannonlake and platform support for Dollar Cove power button.
Overhaul of the mellanox platform driver, creating a new
platform/mellanox directory for the newly multi-architecture regmap
interface.
Significant Intel PMC update with CannonLake support, Coffeelake
update, CPUID enumeration, module support, new read64 API, refactoring
and cleanups.
Revert the apple-gmux iGP IO lock, addressing reported issues with
non-binary drivers, leaving Nvidia binary driver users to comment out
conflicting code.
Miscellaneous fixes and cleanups"
* tag 'platform-drivers-x86-v4.16-1' of git://git.infradead.org/linux-platform-drivers-x86: (81 commits)
platform/x86: mlx-platform: Fix an ERR_PTR vs NULL issue
platform/x86: intel_pmc_core: Special case for Coffeelake
platform/x86: intel_pmc_core: Add CannonLake PCH support
x86/cpu: Add Cannonlake to Intel family
platform/x86: intel_pmc_core: Read base address from LPIT
ACPI / LPIT: Export lpit_read_residency_count_address()
platform/x86: intel-vbtn: Replace License by SDPX identifier
platform/x86: intel-vbtn: Remove redundant inclusions
platform/x86: intel-vbtn: Support tablet mode switch
platform/x86: dell-laptop: Allocate buffer on heap rather than globally
platform/x86: intel_pmc_core: Remove unused header file
platform/x86: mlx-platform: Add hotplug device unregister to error path
platform/x86: mlx-platform: fix module aliases
platform/mellanox: mlxreg-hotplug: Add check for negative adapter number
platform/x86: mlx-platform: Add IO access verification callbacks
platform/x86: mlx-platform: Document pdev_hotplug field
platform/x86: mlx-platform: Allow compilation for 32 bit arch
platform/mellanox: mlxreg-hotplug: Enable building for ARM
platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface
platform/mellanox: Group create/destroy with attribute functions
...
Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android binder
fixes, the usual handful of hyper-v updates, and lots of other smaller
driver updates.
All of these have been in linux-next for a long time, with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLuZw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynS4QCcCrPmwfD5PJwaF+q2dPfyKaflkQMAn0x6Wd+u
Gw3Z2scgjETUpwJ9ilnL
=xcQ0
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android
binder fixes, the usual handful of hyper-v updates, and lots of other
smaller driver updates.
All of these have been in linux-next for a long time, with no reported
issues"
* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
char: lp: use true or false for boolean values
android: binder: use VM_ALLOC to get vm area
android: binder: Use true and false for boolean values
lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
EISA: Delete error message for a failed memory allocation in eisa_probe()
EISA: Whitespace cleanup
misc: remove AVR32 dependencies
virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
soundwire: Fix a signedness bug
uio_hv_generic: fix new type mismatch warnings
uio_hv_generic: fix type mismatch warnings
auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
uio_hv_generic: add rescind support
uio_hv_generic: check that host supports monitor page
uio_hv_generic: create send and receive buffers
uio: document uio_hv_generic regions
doc: fix documentation about uio_hv_generic
vmbus: add monitor_id and subchannel_id to sysfs per channel
vmbus: fix ABI documentation
uio_hv_generic: use ISR callback method
...
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Here is the big Staging and IIO driver patches for 4.16-rc1.
There is the normal amount of new IIO drivers added, like all releases.
The networking IPX and the ncpfs filesystem are moved into the staging
tree, as they are on their way out of the kernel due to lack of use
anymore.
The visorbus subsystem finall has started moving out of the staging tree
to the "real" part of the kernel, and the most and fsl-mc codebases are
almost ready to move out, that will probably happen for 4.17-rc1 if all
goes well.
Other than that, there is a bunch of license header cleanups in the
tree, along with the normal amount of coding style churn that we all
know and love for this codebase. I also got frustrated at the
Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting
huge chunks of it that were never even being used.
Full details of everything is in the shortlog.
All of these patches have been in linux-next for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk4vgCgjeMlwhtar65DIticIRj626EFxiQAnjGmH8Kd
d9Xz2Piq8X47uSsC/6AE
=xxMT
-----END PGP SIGNATURE-----
Merge tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big Staging and IIO driver patches for 4.16-rc1.
There is the normal amount of new IIO drivers added, like all
releases.
The networking IPX and the ncpfs filesystem are moved into the staging
tree, as they are on their way out of the kernel due to lack of use
anymore.
The visorbus subsystem finall has started moving out of the staging
tree to the "real" part of the kernel, and the most and fsl-mc
codebases are almost ready to move out, that will probably happen for
4.17-rc1 if all goes well.
Other than that, there is a bunch of license header cleanups in the
tree, along with the normal amount of coding style churn that we all
know and love for this codebase. I also got frustrated at the
Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting
huge chunks of it that were never even being used.
Full details of everything is in the shortlog.
All of these patches have been in linux-next for a while with no
reported issues"
* tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits)
staging: rtlwifi: remove redundant initialization of 'cfg_cmd'
staging: rtl8723bs: remove a couple of redundant initializations
staging: comedi: reformat lines to 80 chars or less
staging: lustre: separate a connection destroy from free struct kib_conn
Staging: rtl8723bs: Use !x instead of NULL comparison
Staging: rtl8723bs: Remove dead code
Staging: rtl8723bs: Change names to conform to the kernel code
staging: ccree: Fix missing blank line after declaration
staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd'
staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST
staging: fbtft: remove unused FB_TFT_SSD1325 kconfig
staging: comedi: dt2811: remove redundant initialization of 'ns'
staging: wilc1000: fix alignments to match open parenthesis
staging: wilc1000: removed unnecessary defined enums typedef
staging: wilc1000: remove unnecessary use of parentheses
staging: rtl8192u: remove redundant initialization of 'timeout'
staging: sm750fb: fix CamelCase for dispSet var
staging: lustre: lnet/selftest: fix compile error on UP build
staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons
staging: rts5208: Fix "seg_no" calculation in reset_ms_card()
...
Here is the big USB and PHY driver update for 4.16-rc1.
Along with the normally expected XHCI, MUSB, and Gadget driver patches,
there are some PHY driver fixes, license cleanups, sysfs attribute
cleanups, usbip changes, and a raft of other smaller fixes and
additions.
Full details are in the shortlog.
All of these have been in the linux-next tree for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnL0Bg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymg8gCeLg/FMtc0S/xRR/56N/sbthEebcUAnROr9Sg3
55hDLdkyi93o9R86YOAJ
=8d2q
-----END PGP SIGNATURE-----
Merge tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB and PHY driver update for 4.16-rc1.
Along with the normally expected XHCI, MUSB, and Gadget driver
patches, there are some PHY driver fixes, license cleanups, sysfs
attribute cleanups, usbip changes, and a raft of other smaller fixes
and additions.
Full details are in the shortlog.
All of these have been in the linux-next tree for a long time with no
reported issues"
* tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (137 commits)
USB: serial: pl2303: new device id for Chilitag
USB: misc: fix up some remaining DEVICE_ATTR() usages
USB: musb: fix up one odd DEVICE_ATTR() usage
USB: atm: fix up some remaining DEVICE_ATTR() usage
USB: move many drivers to use DEVICE_ATTR_WO
USB: move many drivers to use DEVICE_ATTR_RO
USB: move many drivers to use DEVICE_ATTR_RW
USB: misc: chaoskey: Use true and false for boolean values
USB: storage: remove old wording about how to submit a change
USB: storage: remove invalid URL from drivers
usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found
usbip: list: don't list devices attached to vhci_hcd
usbip: prevent bind loops on devices attached to vhci_hcd
USB: serial: remove redundant initializations of 'mos_parport'
usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()
usb: gadget: compress return logic into one line
usbip: vhci_hcd: update 'status' file header and format
USB: serial: simple: add Motorola Tetra driver
CDC-ACM: apply quirk for card reader
usb: option: Add support for FS040U modem
...
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
Pull integrity updates from James Morris:
"This contains a mixture of bug fixes, code cleanup, and new
functionality. Of note is the integrity cache locking fix, file change
detection, and support for a new EVM portable and immutable signature
type.
The re-introduction of the integrity cache lock (iint) fixes the
problem of attempting to take the i_rwsem shared a second time, when
it was previously taken exclusively. Defining atomic flags resolves
the original iint/i_rwsem circular locking - accessing the file data
vs. modifying the file metadata. Although it fixes the O_DIRECT
problem as well, a subsequent patch is needed to remove the explicit
O_DIRECT prevention.
For performance reasons, detecting when a file has changed and needs
to be re-measured, re-appraised, and/or re-audited, was limited to
after the last writer has closed, and only if the file data has
changed. Detecting file change is based on i_version. For filesystems
that do not support i_version, remote filesystems, or userspace
filesystems, the file was measured, appraised and/or audited once and
never re-evaluated. Now local filesystems, which do not support
i_version or are not mounted with the i_version option, assume the
file has changed and are required to re-evaluate the file. This change
does not address detecting file change on remote or userspace
filesystems.
Unlike file data signatures, which can be included and distributed in
software packages (eg. rpm, deb), the existing EVM signature, which
protects the file metadata, could not be included in software
packages, as it includes file system specific information (eg. i_ino,
possibly the UUID). This pull request defines a new EVM portable and
immutable file metadata signature format, which can be included in
software packages"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima/policy: fix parsing of fsuuid
ima: Use i_version only when filesystem supports it
integrity: remove unneeded initializations in integrity_iint_cache entries
ima: log message to module appraisal error
ima: pass filename to ima_rdwr_violation_check()
ima: Fix line continuation format
ima: support new "hash" and "dont_hash" policy actions
ima: re-introduce own integrity cache lock
EVM: Add support for portable signature format
EVM: Allow userland to permit modification of EVM-protected metadata
ima: relax requiring a file signature for new files with zero length
Pull livepatching updates from Jiri Kosina:
- handle 'infinitely'-long sleeping tasks, from Miroslav Benes
- remove 'immediate' feature, as it turns out it doesn't provide the
originally expected semantics, and brings more issues than value
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add locking to force and signal functions
livepatch: Remove immediate feature
livepatch: force transition to finish
livepatch: send a fake signal to all blocking tasks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TqNv
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- introduce LM3692x dual string driver
New LED trigger:
- introduce a NETDEV trigger
leds-lp8860:
- various fixes to align with LED framework
- add regulator enable during init
- DT support related improvements
Minor fixes and cleanups to the LED class drivers:
- leds-pwm
- ledtrig-activity
- leds-blinkm
- leds-as3645a
- ledtrig-transient"
* tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: ledtrig-transient: Add SPDX license identifiers
leds: lp8860: Various fixes to align with LED framework
leds: lp8860: Add DT parsing to retrieve the trigger node
dt: bindings: lp8860: Add trigger binding to the lp8860
leds: lp8860: Update the dt parsing for LED labeling
dt: bindings: lp8860: Update DT label binding
dt: bindings: lp8860: Update bindings for lp8860
leds: as3645a: Fix line over 80 characters
leds: as3645a: Fix quoted string split warning
leds: lm3692x: Introduce LM3692x dual string driver
dt: bindings: lm3692x: Add bindings for lm3692x LED driver
leds: trigger: Introduce a NETDEV trigger
leds: blinkm: avoid uninitialized data use
ledtrig-activity: Grammar s/a immediate/an immediate/
leds: pwm: Remove unneeded header file
leds: lp8860: Add regulator enable during init
leds: lp8860: Fix linuxdoc format for structure
In this round, we've followed up to support some generic features such as
cgroup, block reservation, linking fscrypt_ops, delivering write_hints,
and some ioctls. And, we could fix some corner cases in terms of power-cut
recovery and subtle deadlocks.
Enhancement:
- bitmap operations to handle NAT blocks
- readahead to improve readdir speed
- switch to use fscrypt_*
- apply write hints for direct IO
- add reserve_root=%u,resuid=%u,resgid=%u to reserve blocks for root/uid/gid
- modify b_avail and b_free to consider root reserved blocks
- support cgroup writeback
- support FIEMAP_FLAG_XATTR for fibmap
- add F2FS_IOC_PRECACHE_EXTENTS to pre-cache extents
- add F2FS_IOC_{GET/SET}_PIN_FILE to pin LBAs for data blocks
- support inode creation time
Bug fix:
- sysfile-based quota operations
- memory footprint accounting
- allow to write data on partial preallocation case
- fix deadlock case on fallocate
- fix to handle fill_super errors
- fix missing inode updates of fsync'ed file
- recover renamed file which was fsycn'ed before
- drop inmemory pages in corner error case
- keep last_disk_size correctly
- recover missing i_inline flags during roll-forward
Various clean-up patches were added as well.
-----BEGIN PGP SIGNATURE-----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=jZqE
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've followed up to support some generic features such
as cgroup, block reservation, linking fscrypt_ops, delivering
write_hints, and some ioctls. And, we could fix some corner cases in
terms of power-cut recovery and subtle deadlocks.
Enhancements:
- bitmap operations to handle NAT blocks
- readahead to improve readdir speed
- switch to use fscrypt_*
- apply write hints for direct IO
- add reserve_root=%u,resuid=%u,resgid=%u to reserve blocks for root/uid/gid
- modify b_avail and b_free to consider root reserved blocks
- support cgroup writeback
- support FIEMAP_FLAG_XATTR for fibmap
- add F2FS_IOC_PRECACHE_EXTENTS to pre-cache extents
- add F2FS_IOC_{GET/SET}_PIN_FILE to pin LBAs for data blocks
- support inode creation time
Bug fixs:
- sysfile-based quota operations
- memory footprint accounting
- allow to write data on partial preallocation case
- fix deadlock case on fallocate
- fix to handle fill_super errors
- fix missing inode updates of fsync'ed file
- recover renamed file which was fsycn'ed before
- drop inmemory pages in corner error case
- keep last_disk_size correctly
- recover missing i_inline flags during roll-forward
Various clean-up patches were added as well"
* tag 'f2fs-for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (72 commits)
f2fs: support inode creation time
f2fs: rebuild sit page from sit info in mem
f2fs: stop issuing discard if fs is readonly
f2fs: clean up duplicated assignment in init_discard_policy
f2fs: use GFP_F2FS_ZERO for cleanup
f2fs: allow to recover node blocks given updated checkpoint
f2fs: recover some i_inline flags
f2fs: correct removexattr behavior for null valued extended attribute
f2fs: drop page cache after fs shutdown
f2fs: stop gc/discard thread after fs shutdown
f2fs: hanlde error case in f2fs_ioc_shutdown
f2fs: split need_inplace_update
f2fs: fix to update last_disk_size correctly
f2fs: kill F2FS_INLINE_XATTR_ADDRS for cleanup
f2fs: clean up error path of fill_super
f2fs: avoid hungtask when GC encrypted block if io_bits is set
f2fs: allow quota to use reserved blocks
f2fs: fix to drop all inmem pages correctly
f2fs: speed up defragment on sparse file
f2fs: support F2FS_IOC_PRECACHE_EXTENTS
...
ocxl.rst gives a quick, high-level view of opencapi.
Update ioctl-number.txt to reflect ioctl numbers being used by the
ocxl driver
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
[mpe: Fix up mixed whitespace as spotted by gregkh]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds the specification for /sysfs/devices/.../coredump
which allows user-space to trigger a device coredump obtaining
binary data from the device for (fault) analysis. It relies on
CONFIG_DEV_COREDUMP being enabled.
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose the number of times the link has been going UP or DOWN, and
update the "carrier_changes" counter to be the sum of these two events.
While at it, also update the sysfs-class-net documentation to cover:
carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count
(4.16)
Signed-off-by: David Decotigny <decot@googlers.com>
[Florian:
* rebase
* add documentation
* merge carrier_changes with up/down counters]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add resources ABI documentation.
Signed-off-by: Arkadi Sharhsevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 pti updates from Thomas Gleixner:
"This contains:
- a PTI bugfix to avoid setting reserved CR3 bits when PCID is
disabled. This seems to cause issues on a virtual machine at least
and is incorrect according to the AMD manual.
- a PTI bugfix which disables the perf BTS facility if PTI is
enabled. The BTS AUX buffer is not globally visible and causes the
CPU to fault when the mapping disappears on switching CR3 to user
space. A full fix which restores BTS on PTI is non trivial and will
be worked on.
- PTI bugfixes for EFI and trusted boot which make sure that the user
space visible page table entries have the NX bit cleared
- removal of dead code in the PTI pagetable setup functions
- add PTI documentation
- add a selftest for vsyscall to verify that the kernel actually
implements what it advertises.
- a sysfs interface to expose vulnerability and mitigation
information so there is a coherent way for users to retrieve the
status.
- the initial spectre_v2 mitigations, aka retpoline:
+ The necessary ASM thunk and compiler support
+ The ASM variants of retpoline and the conversion of affected ASM
code
+ Make LFENCE serializing on AMD so it can be used as speculation
trap
+ The RSB fill after vmexit
- initial objtool support for retpoline
As I said in the status mail this is the most of the set of patches
which should go into 4.15 except two straight forward patches still on
hold:
- the retpoline add on of LFENCE which waits for ACKs
- the RSB fill after context switch
Both should be ready to go early next week and with that we'll have
covered the major holes of spectre_v2 and go back to normality"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
x86,perf: Disable intel_bts when PTI
security/Kconfig: Correct the Documentation reference for PTI
x86/pti: Fix !PCID and sanitize defines
selftests/x86: Add test_vsyscall
x86/retpoline: Fill return stack buffer on vmexit
x86/retpoline/irq32: Convert assembler indirect jumps
x86/retpoline/checksum32: Convert assembler indirect jumps
x86/retpoline/xen: Convert Xen hypercall indirect jumps
x86/retpoline/hyperv: Convert assembler indirect jumps
x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
x86/retpoline/entry: Convert entry assembler indirect jumps
x86/retpoline/crypto: Convert crypto assembler indirect jumps
x86/spectre: Add boot time option to select Spectre v2 mitigation
x86/retpoline: Add initial retpoline support
objtool: Allow alternatives to be ignored
objtool: Detect jumps to retpoline thunks
x86/pti: Make unpoison of pgd for trusted boot work for real
x86/alternatives: Fix optimize_nops() checking
sysfs/cpu: Fix typos in vulnerability documentation
x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
...
The ioctl interface should be in Documentation/ABI along with the rest
of the interfaces.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Annotate the sysfs interface of rtc with file specific permissions
(RO/RW).
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This code offers a way to handle PDM audio microphones in
ASOC framework. Audio driver should use consumer API.
A specific management is implemented for DMA, with a
callback, to allows to handle audio buffers efficiently.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Useful to identify which network queue is associated with
which vmbus channel.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes to vmbus ABI document including:
- make it clear that relid is numeric value in sub directory
- clarify interrupt mask description
- spelling fixes
- document regions
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit introduces a NETDEV trigger for named device
activity. Available triggers are link, rx, and tx.
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The name of the file is "current_timetamp_clock" not
"timestamp_clock".
Fixes: bc2b7dab62 ("iio:core: timestamping clock selection support")
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a sysfs attribute that exposes buffer data available to userspace.
This attribute can be checked at runtime to determine the overall buffer
fill level (across all allocated buffers).
Signed-off-by: Matt Fornero <matt.fornero@mathworks.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the meltdown/spectre problem affects several CPU architectures, it makes
sense to have common way to express whether a system is affected by a
particular vulnerability or not. If affected the way to express the
mitigation should be common as well.
Create /sys/devices/system/cpu/vulnerabilities folder and files for
meltdown, spectre_v1 and spectre_v2.
Allow architectures to override the show function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de
This patch introduces a sysfs interface readdir_ra to enable/disable
readaheading inode block in f2fs_readdir. When readdir_ra is enabled,
it improves the performance of "readdir + stat".
For 300,000 files:
time find /data/test > /dev/null
disable readdir_ra: 1m25.69s real 0m01.94s user 0m50.80s system
enable readdir_ra: 0m18.55s real 0m00.44s user 0m15.39s system
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
SIOX is a bus system invented at Eckelmann AG to control their building
management and refrigeration systems. Traditionally the bus was
implemented on custom microcontrollers, today Linux based machines are
in use, too.
The topology on a SIOX bus looks as follows:
,------->--DCLK-->---------------+----------------------.
^ v v
,--------. ,----------------------. ,------
| | | ,--------------. | |
| |--->--DOUT-->---|->-|shift register|->-|--->---|
| | | `--------------' | |
| master | | device | | device
| | | ,--------------. | |
| |---<--DIN---<---|-<-|shift register|-<-|---<---|
| | | `--------------' | |
`--------' `----------------------' `------
v ^ ^
`----------DLD-------------------+----------------------'
There are two control lines (DCLK and DLD) driven from the bus master to
all devices in parallel and two daisy chained data lines, one for input
and one for output. DCLK is the clock to shift both chains by a single
bit. On an edge of DLD the devices latch both their input and output
shift registers.
This patch adds a framework for this bus type.
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The builtin ima_appraise_tcb policy, which is specified on the boot
command line, can be replaced with a custom policy, normally early in
the boot process. Custom policies can be more restrictive in some ways,
like requiring file signatures, but can be less restrictive in other
ways, like not appraising mutable files. With a less restrictive policy
in place, files in the builtin policy might not be hashed and labeled
with a security.ima hash. On reboot, files which should be labeled in
the ima_appraise_tcb are not labeled, possibly preventing the system
from booting properly.
To resolve this problem, this patch extends the existing IMA policy
actions "measure", "dont_measure", "appraise", "dont_appraise", and
"audit" with "hash" and "dont_hash". The new "hash" action will write
the file hash as security.ima, but without requiring the file to be
appraised as well.
For example, the builtin ima_appraise_tcb policy includes the rule,
"appraise fowner=0". Adding the "hash fowner=0" rule to a custom
policy, will cause the needed file hashes to be calculated and written
as security.ima xattrs.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
When EVM is enabled it forbids modification of metadata protected by
EVM unless there is already a valid EVM signature. If any modification
is made, the kernel will then generate a new EVM HMAC. However, this
does not map well on use cases which use only asymmetric EVM signatures,
as in this scenario the kernel is unable to generate new signatures.
This patch extends the /sys/kernel/security/evm interface to allow
userland to request that modification of these xattrs be permitted. This
is only permitted if no keys have already been loaded. In this
configuration, modifying the metadata will invalidate the EVM appraisal
on the file in question. This allows packaging systems to write out new
files, set the relevant extended attributes and then move them into
place.
There's also some refactoring of the use of evm_initialized in order to
avoid heading down codepaths that assume there's a key available.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
xHCI compatible USB host controllers(i.e. super-speed USB3 controllers)
can be implemented with the Debug Capability(DbC). It presents a debug
device which is fully compliant with the USB framework and provides the
equivalent of a very high performance full-duplex serial link. The debug
capability operation model and registers interface are defined in 7.6.8
of the xHCI specification, revision 1.1.
The DbC debug device shares a root port with the xHCI host. By default,
the debug capability is disabled and the root port is assigned to xHCI.
When the DbC is enabled, the root port will be assigned to the DbC debug
device, and the xHCI sees nothing on this port. This implementation uses
a sysfs node named <dbc> under the xHCI device to manage the enabling
and disabling of the debug capability.
When the debug capability is enabled, it will present a debug device
through the debug port. This debug device is fully compliant with the
USB3 framework, and it can be enumerated by a debug host on the other
end of the USB link. As soon as the debug device is configured, a TTY
serial device named /dev/ttyDBC0 will be created.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a task sleeps in a set of patched functions uninterruptedly, it could
block the whole transition indefinitely. Thus it may be useful to clear
its TIF_PATCH_PENDING to allow the process to finish.
Admin can do that now by writing to force sysfs attribute in livepatch
sysfs directory. TIF_PATCH_PENDING is then cleared for all tasks and the
transition can finish successfully.
Important note! Administrator should not use this feature without a
clearance from a patch distributor. It must be checked that by doing so
the consistency model guarantees are not violated. Removal (rmmod) of
patch modules is permanently disabled when the feature is used. It
cannot be guaranteed there is no task sleeping in such module.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Live patching consistency model is of LEAVE_PATCHED_SET and
SWITCH_THREAD. This means that all tasks in the system have to be marked
one by one as safe to call a new patched function. Safe means when a
task is not (sleeping) in a set of patched functions. That is, no
patched function is on the task's stack. Another clearly safe place is
the boundary between kernel and userspace. The patching waits for all
tasks to get outside of the patched set or to cross the boundary. The
transition is completed afterwards.
The problem is that a task can block the transition for quite a long
time, if not forever. It could sleep in a set of patched functions, for
example. Luckily we can force the task to leave the set by sending it a
fake signal, that is a signal with no data in signal pending structures
(no handler, no sign of proper signal delivered). Suspend/freezer use
this to freeze the tasks as well. The task gets TIF_SIGPENDING set and
is woken up (if it has been sleeping in the kernel before) or kicked by
rescheduling IPI (if it was running on other CPU). This causes the task
to go to kernel/userspace boundary where the signal would be handled and
the task would be marked as safe in terms of live patching.
There are tasks which are not affected by this technique though. The
fake signal is not sent to kthreads. They should be handled differently.
They can be woken up so they leave the patched set and their
TIF_PATCH_PENDING can be cleared thanks to stack checking.
For the sake of completeness, if the task is in TASK_RUNNING state but
not currently running on some CPU it doesn't get the IPI, but it would
eventually handle the signal anyway. Second, if the task runs in the
kernel (in TASK_RUNNING state) it gets the IPI, but the signal is not
handled on return from the interrupt. It would be handled on return to
the userspace in the future when the fake signal is sent again. Stack
checking deals with these cases in a better way.
If the task was sleeping in a syscall it would be woken by our fake
signal, it would check if TIF_SIGPENDING is set (by calling
signal_pending() predicate) and return ERESTART* or EINTR. Syscalls with
ERESTART* return values are restarted in case of the fake signal (see
do_signal()). EINTR is propagated back to the userspace program. This
could disturb the program, but...
* each process dealing with signals should react accordingly to EINTR
return values.
* syscalls returning EINTR happen to be quite common situation in the
system even if no fake signal is sent.
* freezer sends the fake signal and does not deal with EINTR anyhow.
Thus EINTR values are returned when the system is resumed.
The very safe marking is done in architectures' "entry" on syscall and
interrupt/exception exit paths, and in a stack checking functions of
livepatch. TIF_PATCH_PENDING is cleared and the next
recalc_sigpending() drops TIF_SIGPENDING. In connection with this, also
call klp_update_patch_state() before do_signal(), so that
recalc_sigpending() in dequeue_signal() can clear TIF_PATCH_PENDING
immediately and thus prevent a double call of do_signal().
Note that the fake signal is not sent to stopped/traced tasks. Such task
prevents the patching to finish till it continues again (is not traced
anymore).
Last, sending the fake signal is not automatic. It is done only when
admin requests it by writing 1 to signal sysfs attribute in livepatch
sysfs directory.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: x86@kernel.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For this cycle we have quite an update for the Dell SMBIOS driver
including WMI work to provide an interface for SMBIOS tokens via sysfs
and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
split into a separate driver followed by a new WMI dispatcher.
The latter provides a character device interface to user space.
The pull request contains a merge of immutable branch from Wolfram Sang
in order to apply a dependent fix to the Intel CherryTrail Battery
Management driver.
Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
support is added for Intel Skylake.
Peaq WMI hotkeys driver gets its own maintainer and white list of
supported models.
Silead DMI is expanded to support few additional platforms.
Tablet mode via GMMS ACPI method is added to support some ThinkPad
tablets.
Two commits appear here which were previously merged during the
v4.14-rcX cycle:
- d7ca5ebf24 platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe function
- e3075fd6f8 platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates
Add driver to force WMI Thunderbolt controller power status:
- Add driver to force WMI Thunderbolt controller power status
asus-wmi:
- Add lightbar led support
dell-laptop:
- Allocate buffer before rfkill use
dell-smbios:
- fix string overflow
- Add filtering support
- Introduce dispatcher for SMM calls
- Add a sysfs interface for SMBIOS tokens
- only run if proper oem string is detected
- Prefix class/select with cmd_
- Add pr_fmt definition to driver
dell-smbios-smm:
- test for WSMT
dell-smbios-wmi:
- release mutex lock on WMI call failure
- introduce userspace interface
- Add new WMI dispatcher driver
dell-smo8800:
- remove redundant assignments to byte_data
dell-wmi:
- don't check length returned
- clean up wmi descriptor check
- increase severity of some failures
- Do not match on descriptor GUID modalias
- Label driver as handling notifications
dell-*wmi*:
- Relay failed initial probe to dependent drivers
dell-wmi-descriptor:
- check if memory was allocated
- split WMI descriptor into it's own driver
fujitsu-laptop:
- Fix radio LED detection
- Don't oops when FUJ02E3 is not presnt
hp_accel:
- Add quirk for HP ProBook 440 G4
hp-wmi:
- Fix tablet mode detection for convertibles
ideapad-laptop:
- Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list
intel_cht_int33fe:
- Update fusb302 type string, add properties
- make a couple of local functions static
- Work around BIOS bug on some devices
intel-hid:
- Power button suspend on Dell Latitude 7275
intel_ips:
- Convert timers to use timer_setup()
- Remove FSF address from GPL notice
- Remove unneeded fields and label
- Keep pointer to struct device
- Use PCI_VDEVICE() macro
- Switch to new PCI IRQ allocation API
- Simplify error handling via devres API
intel_pmc_ipc:
- Revert Use MFD framework to create dependent devices
- Use MFD framework to create dependent devices
- Use spin_lock to protect GCR updates
- Use devm_* calls in driver probe function
intel_punit_ipc:
- Fix resource ioremap warning
intel_telemetry:
- Remove useless default in Kconfig
- Add needed inclusion
- cleanup redundant headers
- Fix typos
- Fix load failure info
intel_telemetry_debugfs:
- Use standard ARRAY_SIZE() macro
intel_turbo_max_3:
- Add Skylake platform
intel-wmi-thunderbolt:
- Silence error cases
MAINTAINERS:
- Add entry for the PEAQ WMI hotkeys driver
mlx-platform:
- make a couple of structures static
peaq_wmi:
- Fix missing terminating entry for peaq_dmi_table
peaq-wmi:
- Remove unnecessary checks from peaq_wmi_exit
- Add DMI check before binding to the WMI interface
- Revert Blacklist Lenovo ideapad 700-15ISK
- Blacklist Lenovo ideapad 700-15ISK
silead_dmi:
- Add silead, home-button property to some tablets
- Add entry for the Digma e200 tablet
- Fix GP-electronic T701 entry
- Add entry for the Chuwi Hi8 Pro tablet
sony-laptop:
- Drop variable assignment in sony_nc_setup_rfkill()
- Fix error handling in sony_nc_setup_rfkill()
thinkpad_acpi:
- Implement tablet mode using GMMS method
tools/wmi:
- add a sample for dell smbios communication over WMI
wmi:
- release mutex on module acquistion failure
- create userspace interface for drivers
- Don't allow drivers to get each other's GUIDs
- Add new method wmidev_evaluate_method
- Destroy on cleanup rather than unregister
- Cleanup exit routine in reverse order of init
- Sort include list
-----BEGIN PGP SIGNATURE-----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=upqs
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
"Here is the collected material against Platform Drivers x86 subsystem.
It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver
activity
For this cycle we have quite an update for the Dell SMBIOS driver
including WMI work to provide an interface for SMBIOS tokens via sysfs
and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
split into a separate driver followed by a new WMI dispatcher. The
latter provides a character device interface to user space.
The git history also contains a merge of immutable branch from Wolfram
Sang in order to apply a dependent fix to the Intel CherryTrail
Battery Management driver.
Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
support is added for Intel Skylake.
Peaq WMI hotkeys driver gets its own maintainer and white list of
supported models.
Silead DMI is expanded to support few additional platforms.
Tablet mode via GMMS ACPI method is added to support some ThinkPad
tablets.
new driver:
- Add driver to force WMI Thunderbolt controller power status
asus-wmi:
- Add lightbar led support
dell-laptop:
- Allocate buffer before rfkill use
dell-smbios:
- fix string overflow
- Add filtering support
- Introduce dispatcher for SMM calls
- Add a sysfs interface for SMBIOS tokens
- only run if proper oem string is detected
- Prefix class/select with cmd_
- Add pr_fmt definition to driver
dell-smbios-smm:
- test for WSMT
dell-smbios-wmi:
- release mutex lock on WMI call failure
- introduce userspace interface
- Add new WMI dispatcher driver
dell-smo8800:
- remove redundant assignments to byte_data
dell-wmi:
- don't check length returned
- clean up wmi descriptor check
- increase severity of some failures
- Do not match on descriptor GUID modalias
- Label driver as handling notifications
dell-*wmi*:
- Relay failed initial probe to dependent drivers
dell-wmi-descriptor:
- check if memory was allocated
- split WMI descriptor into it's own driver
fujitsu-laptop:
- Fix radio LED detection
- Don't oops when FUJ02E3 is not presnt
hp_accel:
- Add quirk for HP ProBook 440 G4
hp-wmi:
- Fix tablet mode detection for convertibles
ideapad-laptop:
- Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list
intel_cht_int33fe:
- Update fusb302 type string, add properties
- make a couple of local functions static
- Work around BIOS bug on some devices
intel-hid:
- Power button suspend on Dell Latitude 7275
intel_ips:
- Convert timers to use timer_setup()
- Remove FSF address from GPL notice
- Remove unneeded fields and label
- Keep pointer to struct device
- Use PCI_VDEVICE() macro
- Switch to new PCI IRQ allocation API
- Simplify error handling via devres API
intel_pmc_ipc:
- Revert Use MFD framework to create dependent devices
- Use MFD framework to create dependent devices
- Use spin_lock to protect GCR updates
- Use devm_* calls in driver probe function
intel_punit_ipc:
- Fix resource ioremap warning
intel_telemetry:
- Remove useless default in Kconfig
- Add needed inclusion
- cleanup redundant headers
- Fix typos
- Fix load failure info
intel_telemetry_debugfs:
- Use standard ARRAY_SIZE() macro
intel_turbo_max_3:
- Add Skylake platform
intel-wmi-thunderbolt:
- Silence error cases
mlx-platform:
- make a couple of structures static
peaq_wmi:
- Fix missing terminating entry for peaq_dmi_table
peaq-wmi:
- Remove unnecessary checks from peaq_wmi_exit
- Add DMI check before binding to the WMI interface
- Revert Blacklist Lenovo ideapad 700-15ISK
- Blacklist Lenovo ideapad 700-15ISK
silead_dmi:
- Add silead, home-button property to some tablets
- Add entry for the Digma e200 tablet
- Fix GP-electronic T701 entry
- Add entry for the Chuwi Hi8 Pro tablet
sony-laptop:
- Drop variable assignment in sony_nc_setup_rfkill()
- Fix error handling in sony_nc_setup_rfkill()
thinkpad_acpi:
- Implement tablet mode using GMMS method
tools/wmi:
- add a sample for dell smbios communication over WMI
wmi:
- release mutex on module acquistion failure
- create userspace interface for drivers
- Don't allow drivers to get each other's GUIDs
- Add new method wmidev_evaluate_method
- Destroy on cleanup rather than unregister
- Cleanup exit routine in reverse order of init
- Sort include list"
* tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
platform/x86: silead_dmi: Add silead, home-button property to some tablets
platform/x86: dell-laptop: Allocate buffer before rfkill use
platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
platform/x86: dell-wmi-descriptor: check if memory was allocated
platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
platform/x86: wmi: release mutex on module acquistion failure
platform/x86: dell-smbios: fix string overflow
platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
platform/x86: intel_punit_ipc: Fix resource ioremap warning
platform/x86: dell-smo8800: remove redundant assignments to byte_data
platform/x86: hp-wmi: Fix tablet mode detection for convertibles
platform/x86: intel_ips: Convert timers to use timer_setup()
platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
tools/wmi: add a sample for dell smbios communication over WMI
platform/x86: dell-smbios-wmi: introduce userspace interface
platform/x86: wmi: create userspace interface for drivers
platform/x86: dell-smbios: Add filtering support
platform/x86: dell-smbios-smm: test for WSMT
...
In this round, we introduce sysfile-based quota support which is required
for Android by default. In addition, we allow that users are able to reserve
some blocks in runtime to mitigate performance drops in low free space.
Enhancement
- assign proper data segments according to write_hints given by user
- issue cache_flush on dirty devices only among multiple devices
- exploit cp_error flag and add more faults to enhance fault injection test
- conduct more readaheads during f2fs_readdir
- add a range for discard commands
Bug fix
- fix zero stat->st_blocks when inline_data is set
- drop crypto key and free stale memory pointer while evict_inode is failing
- fix some corner cases in free space and segment management
- fix wrong last_disk_size
This series includes lots of clean-ups and code enhancement in terms of xattr
operations, discard/flush command control. In addition, it adds versatile
debugfs entries to monitor f2fs status.
-----BEGIN PGP SIGNATURE-----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=c49T
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we introduce sysfile-based quota support which is
required for Android by default. In addition, we allow that users are
able to reserve some blocks in runtime to mitigate performance drops
in low free space.
Enhancements:
- assign proper data segments according to write_hints given by user
- issue cache_flush on dirty devices only among multiple devices
- exploit cp_error flag and add more faults to enhance fault
injection test
- conduct more readaheads during f2fs_readdir
- add a range for discard commands
Bug fixes:
- fix zero stat->st_blocks when inline_data is set
- drop crypto key and free stale memory pointer while evict_inode is
failing
- fix some corner cases in free space and segment management
- fix wrong last_disk_size
This series includes lots of clean-ups and code enhancement in terms
of xattr operations, discard/flush command control. In addition, it
adds versatile debugfs entries to monitor f2fs status"
* tag 'f2fs-for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (75 commits)
f2fs: deny accessing encryption policy if encryption is off
f2fs: inject fault in inc_valid_node_count
f2fs: fix to clear FI_NO_PREALLOC
f2fs: expose quota information in debugfs
f2fs: separate nat entry mem alloc from nat_tree_lock
f2fs: validate before set/clear free nat bitmap
f2fs: avoid opened loop codes in __add_ino_entry
f2fs: apply write hints to select the type of segments for buffered write
f2fs: introduce scan_curseg_cache for cleanup
f2fs: optimize the way of traversing free_nid_bitmap
f2fs: keep scanning until enough free nids are acquired
f2fs: trace checkpoint reason in fsync()
f2fs: keep isize once block is reserved cross EOF
f2fs: avoid race in between GC and block exchange
f2fs: save a multiplication for last_nid calculation
f2fs: fix summary info corruption
f2fs: remove dead code in update_meta_page
f2fs: remove unneeded semicolon
f2fs: don't bother with inode->i_version
f2fs: check curseg space before foreground GC
...
Here is the big set of char/misc and other driver subsystem patches for
4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when
merging to your tree as one lkdtm patch came in through the perf tree as
well as this one. The resolution is to take the const change that this
tree provides.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a
sBi6WS87In5v1QO1Rgfc
=dH2a
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem patches
for 4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
VME: Return -EBUSY when DMA list in use
w1: keep balance of mutex locks and refcnts
MAINTAINERS: Update VME subsystem tree.
nvmem: sunxi-sid: add support for A64/H5's SID controller
nvmem: imx-ocotp: Update module description
nvmem: imx-ocotp: Enable i.MX7D OTP write support
nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
nvmem: imx-ocotp: Add support for banked OTP addressing
nvmem: imx-ocotp: Pass parameters via a struct
nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
nvmem: uniphier: add UniPhier eFuse driver
dt-bindings: nvmem: add description for UniPhier eFuse
nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
nvmem: qfprom: fix different address space warnings of sparse
nvmem: mtk-efuse: fix different address space warnings of sparse
nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
thunderbolt: tb: fix use after free in tb_activate_pcie_devices
MAINTAINERS: Add git tree for Thunderbolt development
...
Pull networking updates from David Miller:
"Highlights:
1) Maintain the TCP retransmit queue using an rbtree, with 1GB
windows at 100Gb this really has become necessary. From Eric
Dumazet.
2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.
3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
Lunn.
4) Add meter action support to openvswitch, from Andy Zhou.
5) Add a data meta pointer for BPF accessible packets, from Daniel
Borkmann.
6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.
7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.
8) More work to move the RTNL mutex down, from Florian Westphal.
9) Add 'bpftool' utility, to help with bpf program introspection.
From Jakub Kicinski.
10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
Dangaard Brouer.
11) Support 'blocks' of transformations in the packet scheduler which
can span multiple network devices, from Jiri Pirko.
12) TC flower offload support in cxgb4, from Kumar Sanghvi.
13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
Leitner.
14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.
15) Add RED qdisc offloadability, and use it in mlxsw driver. From
Nogah Frankel.
16) eBPF based device controller for cgroup v2, from Roman Gushchin.
17) Add some fundamental tracepoints for TCP, from Song Liu.
18) Remove garbage collection from ipv6 route layer, this is a
significant accomplishment. From Wei Wang.
19) Add multicast route offload support to mlxsw, from Yotam Gigi"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
tcp: highest_sack fix
geneve: fix fill_info when link down
bpf: fix lockdep splat
net: cdc_ncm: GetNtbFormat endian fix
openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
netem: remove unnecessary 64 bit modulus
netem: use 64 bit divide by rate
tcp: Namespace-ify sysctl_tcp_default_congestion_control
net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
ipv6: set all.accept_dad to 0 by default
uapi: fix linux/tls.h userspace compilation error
usbnet: ipheth: prevent TX queue timeouts when device not ready
vhost_net: conditionally enable tx polling
uapi: fix linux/rxrpc.h userspace compilation errors
net: stmmac: fix LPI transitioning for dwmac4
atm: horizon: Fix irq release error
net-sysfs: trigger netlink notification on ifalias change via sysfs
openvswitch: Using kfree_rcu() to simplify the code
openvswitch: Make local function ovs_nsh_key_attr_size() static
openvswitch: Fix return value check in ovs_meter_cmd_features()
...
CORE:
- Fix the semantics of raw GPIO to actually be raw. No
inversion semantics as before, but also no open draining,
and allow the raw operations to affect lines used for
interrupts as the caller supposedly knows what they are
doing if they are getting the big hammer.
- Rewrote the __inner_function() notation calls to names that
make more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all
IRQs are mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This
allows us to read several GPIO lines with a single
register read. This has high value for some usecases: it
can be used to create oscilloscopes and signal analyzers
and other things that rely on reading several lines at
exactly the same instant. Also a generally nice
optimization. This uses the new assign_bit() macro from
the bitops lib that was ACKed by Andrew Morton and
is implemented for two drivers, one of them being the
generic MMIO driver so everyone using that will be able
to benefit from this.
- Do not allow requests of Open Drain and Open Source
setting of a GPIO line simultaneously. If the hardware
actually supports enabling both at the same time the
electrical result would be disastrous.
- A new interrupt chip core helper. This will be helpful
to deal with "banked" GPIOs, which means GPIO controllers
with several logical blocks of GPIO inside them. This
is several gpiochips per device in the device model, in
contrast to the case when there is a 1-to-1 relationship
between a device and a gpiochip.
NEW DRIVERS:
- Maxim MAX3191x industrial serializer, a very interesting
piece of professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the
recent Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
OTHER IMPROVEMENTS:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the
Broadcom BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal
of dead code etc.
- Explicit comments on fall-through switch() statements.
-----BEGIN PGP SIGNATURE-----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=8Mon
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.15 kernel cycle:
Core:
- Fix the semantics of raw GPIO to actually be raw. No inversion
semantics as before, but also no open draining, and allow the raw
operations to affect lines used for interrupts as the caller
supposedly knows what they are doing if they are getting the big
hammer.
- Rewrote the __inner_function() notation calls to names that make
more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all IRQs are
mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This allows us
to read several GPIO lines with a single register read. This has
high value for some usecases: it can be used to create
oscilloscopes and signal analyzers and other things that rely on
reading several lines at exactly the same instant. Also a generally
nice optimization. This uses the new assign_bit() macro from the
bitops lib that was ACKed by Andrew Morton and is implemented for
two drivers, one of them being the generic MMIO driver so everyone
using that will be able to benefit from this.
- Do not allow requests of Open Drain and Open Source setting of a
GPIO line simultaneously. If the hardware actually supports
enabling both at the same time the electrical result would be
disastrous.
- A new interrupt chip core helper. This will be helpful to deal with
"banked" GPIOs, which means GPIO controllers with several logical
blocks of GPIO inside them. This is several gpiochips per device in
the device model, in contrast to the case when there is a 1-to-1
relationship between a device and a gpiochip.
New drivers:
- Maxim MAX3191x industrial serializer, a very interesting piece of
professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the recent
Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
Other improvements:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the Broadcom
BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal of dead
code etc.
- Explicit comments on fall-through switch() statements"
* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
gpio: tegra186: Remove tegra186_gpio_lock_class
gpio: rcar: Add r8a77995 (R-Car D3) support
pinctrl: bcm2835: Fix some merge fallout
gpio: Fix undefined lock_dep_class
gpio: Automatically add lockdep keys
gpio: Introduce struct gpio_irq_chip.first
gpio: Disambiguate struct gpio_irq_chip.nested
gpio: Add Tegra186 support
gpio: Export gpiochip_irq_{map,unmap}()
gpio: Implement tighter IRQ chip integration
gpio: Move lock_key into struct gpio_irq_chip
gpio: Move irq_valid_mask into struct gpio_irq_chip
gpio: Move irq_nested into struct gpio_irq_chip
gpio: Move irq_chained_parent to struct gpio_irq_chip
gpio: Move irq_default_type to struct gpio_irq_chip
gpio: Move irq_handler to struct gpio_irq_chip
gpio: Move irqdomain into struct gpio_irq_chip
gpio: Move irqchip into struct gpio_irq_chip
gpio: Introduce struct gpio_irq_chip
pinctrl: armada-37xx: remove unused variable
...
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd atomisp
cleanups (take the media tree's version).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
g3ioPBqmqC/2DSbldr2o
=/ebw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume
and clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler
on ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core
and drop legacy bus type suspend and resume callbacks from
ARM/locomo (Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up
somewhat (Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle)
residency counter based on the LPIT ACPI table on Intel
platforms (Srinivas Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the
notifier removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use
stale cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing
wakeup events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent
the PM core from using the direct-complete optimization with
it as that is guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit
(Gaurav Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it
up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in
the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches,
Rafael Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava,
Shuah Khan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QTnx
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are no real big ticket items here this time.
The most noticeable change is probably the relocation of the OPP
(Operating Performance Points) framework to its own directory under
drivers/ as it has grown big enough for that. Also Viresh is now going
to maintain it and send pull requests for it to me, so you will see
this change in the git history going forward (but still not right
now).
Another noticeable set of changes is the modifications of the PM core,
the PCI subsystem and the ACPI PM domain to allow of more integration
between system-wide suspend/resume and runtime PM. For now it's just a
way to avoid resuming devices from runtime suspend unnecessarily
during system suspend (if the driver sets a flag to indicate its
readiness for that) and in the works is an analogous mechanism to
allow devices to stay suspended after system resume.
In addition to that, we have some changes related to supporting
frequency-invariant CPU utilization metrics in the scheduler and in
the schedutil cpufreq governor on ARM and changes to add support for
device performance states to the generic power domains (genpd)
framework.
The rest is mostly fixes and cleanups of various sorts.
Specifics:
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume and
clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler on
ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core and
drop legacy bus type suspend and resume callbacks from ARM/locomo
(Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up somewhat
(Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
counter based on the LPIT ACPI table on Intel platforms (Srinivas
Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the notifier
removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use stale
cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing wakeup
events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent the PM
core from using the direct-complete optimization with it as that is
guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it up
(Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in the
cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava, Shuah
Khan)"
* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
intel_idle: Graceful probe failure when MWAIT is disabled
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpuidle: Avoid assignment in if () argument
cpuidle: Clean up cpuidle_enable_device() error handling a bit
ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
cpuidle: ladder: Add per CPU PM QoS resume latency support
PM / QoS: Fix device resume latency framework
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
...
Pull security subsystem integrity updates from James Morris:
"There is a mixture of bug fixes, code cleanup, preparatory code for
new functionality and new functionality.
Commit 26ddabfe96 ("evm: enable EVM when X509 certificate is
loaded") enabled EVM without loading a symmetric key, but was limited
to defining the x509 certificate pathname at build. Included in this
set of patches is the ability of enabling EVM, without loading the EVM
symmetric key, from userspace. New is the ability to prevent the
loading of an EVM symmetric key."
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Remove redundant conditional operator
ima: Fix bool initialization/comparison
ima: check signature enforcement against cmdline param instead of CONFIG
module: export module signature enforcement status
ima: fix hash algorithm initialization
EVM: Only complain about a missing HMAC key once
EVM: Allow userspace to signal an RSA key has been loaded
EVM: Include security.apparmor in EVM measurements
ima: call ima_file_free() prior to calling fasync
integrity: use kernel_read_file_from_path() to read x509 certs
ima: always measure and audit files in policy
ima: don't remove the securityfs policy file
vfs: fix mounting a filesystem with i_version
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaCXiaAAoJEP4mhCVzWIwp+c4P/3UptZJJScU4WFS1zXH8h/YK
mYQ4DOCZqQYihKV4ssbAAjmTkT3RdMkl+rq2s5+ZfVbsu57UqeHNaNXBQWirkXCo
xBDzZlZFz42g4apKq+ZfmewZTM2fjed8Z7SrDcxPkkyU90QKa/LFFleAyxyXxXr1
ubKHJtev/oWBRxvzvWPYNUI5ExraxGxp2iGvavoYHNcggAgOSBJoKESvF7er5MRK
Cx5cuKAESU2dJFQnebjndx3dFgQsZ18RTRXUom50oP3BXF2G3gIBMjxp9VfyuOGV
xedyE2ALQxr1bxyWWejMdhhiZ+eNZNtiEJKqJ37ArTeBDyDfO/SDVXlkqkAARlYW
rTzh9olfbuhFdCAo2gxAcCaQXnjgQzDDKnQJs++tQVziXGI9ezc44+A6fNh39nre
yc/MLIjN96vWRhhFuTeFuENN+n7D2xyy+keXZXrALYYOCPAlKtip6DOgVl3ltNvx
K1O7/STqdR4OHLK6vgdzi9ai3PmcmSBQwKCqqCH/7mcFm1xtBcxqdrEwORLQ3lCH
c/tl4lJqJR2BD8U9gipjik0ovWb5p2KKAYhjqEY2qMy14OXs2509Y8GcqQRzqcQc
FSAfUInooHfDEbUBVsLpTOjMvd6LAx34fTJ9QAanAZ1wdeV8C9DRz3kJh/L/mOmG
N7/jyJnMV1Izknmpc2MP
=3Gvx
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups"
* tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute
dt-bindings: sdhci-fujitsu: document cmd-dat-delay property
mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
mmc: dw_mmc: Convert timers to use timer_setup()
mmc: dw_mmc: Cleanup the DTO timer like the CTO one
mmc: vub300: Use common code in __download_offload_pseudocode()
mmc: tmio: Use common error handling code in tmio_mmc_host_probe()
mmc: Convert timers to use timer_setup()
mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers
mmc: sdhci-acpi: Let devices define their own private data
mmc: mediatek: perfer to use rise edge latching for cmd line
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: add latch-ck support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add busy_check support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add pad_tune0 support
mmc: mediatek: make hs400_tune_response only for mt8173
arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
...
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from Sayli
Karnic will point out kerneldoc comments that are not actually used in
the documentation. Jani Nikula's documentation-file-ref-check finds
references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
-----BEGIN PGP SIGNATURE-----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=H6ud
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from
Sayli Karnic will point out kerneldoc comments that are not actually
used in the documentation. Jani Nikula's
documentation-file-ref-check finds references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
This set reaches outside of Documentation/ a bit more than most. In
all cases, the changes are to comment docs, mostly from Randy, in
places where there didn't seem to be anybody better to take them"
* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
documentation: fb: update list of available compiled-in fonts
MAINTAINERS: update DMAengine documentation location
dmaengine: doc: ReSTize pxa_dma doc
dmaengine: doc: ReSTize dmatest doc
dmaengine: doc: ReSTize client API doc
dmaengine: doc: ReSTize provider doc
dmaengine: doc: Add ReST style dmaengine document
ftrace/docs: Add documentation on how to use ftrace from within the kernel
bug-hunting.rst: Fix an example and a typo in a Sphinx tag
scripts: Add a script to find unused documentation
samples: Convert timers to use timer_setup()
documentation: kernel-api: add more info on bitmap functions
Documentation: fix selftests related file refs
Documentation: fix ref to power basic-pm-debugging
Documentation: fix ref to trace stm content
Documentation: fix ref to coccinelle content
Documentation: fix ref to workqueue content
Documentation: fix ref to sphinx/kerneldoc.py
Documentation: fix locking rt-mutex doc refs
docs: dev-tools: correct Coccinelle version number
...
EVM will only perform validation once a key has been loaded. This key
may either be a symmetric trusted key (for HMAC validation and creation)
or the public half of an asymmetric key (for digital signature
validation). The /sys/kernel/security/evm interface allows userland to
signal that a symmetric key has been loaded, but does not allow userland
to signal that an asymmetric public key has been loaded.
This patch extends the interface to permit userspace to pass a bitmask
of loaded key types. It also allows userspace to block loading of a
symmetric key in order to avoid a compromised system from being able to
load an additional key type later.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The special value of 0 for device resume latency PM QoS means
"no restriction", but there are two problems with that.
First, device resume latency PM QoS requests with 0 as the
value are always put in front of requests with positive
values in the priority lists used internally by the PM QoS
framework, causing 0 to be chosen as an effective constraint
value. However, that 0 is then interpreted as "no restriction"
effectively overriding the other requests with specific
restrictions which is incorrect.
Second, the users of device resume latency PM QoS have no
way to specify that *any* resume latency at all should be
avoided, which is an artificial limitation in general.
To address these issues, modify device resume latency PM QoS to
use S32_MAX as the "no constraint" value and 0 as the "no
latency at all" one and rework its users (the cpuidle menu
governor, the genpd QoS governor and the runtime PM framework)
to follow these changes.
Also add a special "n/a" value to the corresponding user space I/F
to allow user space to indicate that it cannot accept any resume
latencies at all for the given device.
Fixes: 85dc0b8a40 (PM / QoS: Make it possible to expose PM QoS latency constraints)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Ramesh Thomas <ramesh.thomas@intel.com>
This patch exports min_ssr_segments threshold in sysfs to let user
control triggering SSR allocation flexibly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are some missing sysfs entries' description in document, add them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It supports to extend reserved_blocks sysfs interface to be soft
threshold, which allows user configure it exceeding current available
user space. This patch also introduces a new sysfs interface called
current_reserved_blocks, which shows the current blocks that have
already been reserved.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
It's important for the driver to provide a R/W ioctl to ensure that
two competing userspace processes don't race to provide or read each
others data.
This userspace character device will be used to perform SMBIOS calls
from any applications.
It provides an ioctl that will allow passing the WMI calling
interface buffer between userspace and kernel space.
This character device is intended to deprecate the dcdbas kernel module
and the interface that it provides to userspace.
To perform an SMBIOS IOCTL call using the character device userspace will
perform a read() on the the character device. The WMI bus will provide
a u64 variable containing the necessary size of the IOCTL buffer.
The API for interacting with this interface is defined in documentation
as well as the WMI uapi header provides the format of the structures.
Not all userspace requests will be accepted. The dell-smbios filtering
functionality will be used to prevent access to certain tokens and calls.
All whitelisted commands and tokens are now shared out to userspace so
applications don't need to define them in their own headers.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Currently userspace tools can access system tokens via the dcdbas
kernel module and a SMI call that will cause the platform to execute
SMM code.
With a goal in mind of deprecating the dcdbas kernel module a different
method for accessing these tokens from userspace needs to be created.
This is intentionally marked to only be readable as a process with
CAP_SYS_ADMIN as it can contain sensitive information about the
platform's configuration.
While adding this interface I found that some tokens are duplicated.
These need to be ignored from sysfs to avoid duplicate files.
MAINTAINERS was missing for this driver. Add myself and Pali to
maintainers list for it.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:
- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.
- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.
- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).
- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.
New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.
Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c/cht-wc-fusb302-immutable immutable branch from Wolfram Sang:
as discussed before, here is the immutable branch for the i2c-cht-wc
driver, so you can safely apply Hans' patch [1]
"platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties"
on top of this.
[1] http://patchwork.ozlabs.org/patch/824314/
Smooth Cong Wang's bug fix into 'net-next'. Basically put
the bulk of the tcf_block_put() logic from 'net' into
tcf_block_put_ext(), but after the offload unbind.
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 0cc2b4e5a0 (PM / QoS: Fix device resume latency PM
QoS) as it introduced regressions on multiple systems and the fix-up
in commit 2a9a86d5c8 (PM / QoS: Fix default runtime_pm device resume
latency) does not address all of them.
The original problem that commit 0cc2b4e5a0 was attempting to fix
will be addressed later.
Fixes: 0cc2b4e5a0 (PM / QoS: Fix device resume latency PM QoS)
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When investigating performance, it is useful to be able to look at
the number of host and guest events per-channel. This is equivalent
to per-device interrupt statistics.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
New device support
* ti-dac082s085 dac
- new driver supporting 8, 10 and 12 bit TI DACs with 2 and 4 channels:
DAC082S085, DAC102S085, DAC122S085, DAC104s085 and DAC124S085.
Minor features and cleanps
* adc12138
- make array ch_to_mux static for small object code size reduction.
* sun4i-gpadc
- use of_device_get_match_data rather than opencoding it.
* stm32 trigger
- add tim15 tigger on STM32H7
- check clock rate to avoid potential division by zero
* tsl2x7x staging cleanups.
- move *_thresh_period to being created by IIO core.
- remove unused tsl2x7x_parse_result structure.
- sort includes
- drop a repeat iio_dev forward definition
- fix some code alignment of defines.
- use IIO_CONST_ATTR for constant string attribute
- drop some unnecessary parentheses
- fix various alignment with parenthese
- rename power defines for readability reasons
- fix a missaligned break statement
- Tidy up function definitions so they fit on a single line.
-----BEGIN PGP SIGNATURE-----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=IXO+
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.15c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of new device support, cleanups and features for IIO in the 4.15 cycle
New device support
* ti-dac082s085 dac
- new driver supporting 8, 10 and 12 bit TI DACs with 2 and 4 channels:
DAC082S085, DAC102S085, DAC122S085, DAC104s085 and DAC124S085.
Minor features and cleanps
* adc12138
- make array ch_to_mux static for small object code size reduction.
* sun4i-gpadc
- use of_device_get_match_data rather than opencoding it.
* stm32 trigger
- add tim15 tigger on STM32H7
- check clock rate to avoid potential division by zero
* tsl2x7x staging cleanups.
- move *_thresh_period to being created by IIO core.
- remove unused tsl2x7x_parse_result structure.
- sort includes
- drop a repeat iio_dev forward definition
- fix some code alignment of defines.
- use IIO_CONST_ATTR for constant string attribute
- drop some unnecessary parentheses
- fix various alignment with parenthese
- rename power defines for readability reasons
- fix a missaligned break statement
- Tidy up function definitions so they fit on a single line.
The special value of 0 for device resume latency PM QoS means
"no restriction", but there are two problems with that.
First, device resume latency PM QoS requests with 0 as the
value are always put in front of requests with positive
values in the priority lists used internally by the PM QoS
framework, causing 0 to be chosen as an effective constraint
value. However, that 0 is then interpreted as "no restriction"
effectively overriding the other requests with specific
restrictions which is incorrect.
Second, the users of device resume latency PM QoS have no
way to specify that *any* resume latency at all should be
avoided, which is an artificial limitation in general.
To address these issues, modify device resume latency PM QoS to
use S32_MAX as the "no constraint" value and 0 as the "no
latency at all" one and rework its users (the cpuidle menu
governor, the genpd QoS governor and the runtime PM framework)
to follow these changes.
Also add a special "n/a" value to the corresponding user space I/F
to allow user space to indicate that it cannot accept any resume
latencies at all for the given device.
Fixes: 85dc0b8a40 (PM / QoS: Make it possible to expose PM QoS latency constraints)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alex Shi <alex.shi@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
We want the driver fixes in here and this resolves a merge issue with
the binder driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a small number of patches to resolve some reported IIO and a
staging driver problem. Nothing major here, full details are in the
shortlog below.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWe2ZWg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymZqgCbB3My5ciPpAlZFnuNFYrXZIvT/PoAnR9amLJM
jwlRLHQPFQ7/Ue2zD9jc
=aaFo
-----END PGP SIGNATURE-----
Merge tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH:
"Here are a small number of patches to resolve some reported IIO and a
staging driver problem. Nothing major here, full details are in the
shortlog below.
All have been in linux-next with no reported issues"
* tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: bcm2835-audio: Fix memory corruption
iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property
iio: adc: dln2-adc: fix build error
iio: dummy: events: Add missing break
staging: iio: ade7759: fix signed extension bug on shift of a u8
iio: pressure: zpa2326: Remove always-true check which confuses gcc
iio: proximity: as3935: noise detection + threshold changes
There were quite a few overlapping sets of changes here.
Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.
Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly. If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.
In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().
Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.
The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
The DACrrcS085 (rr = 08/10/12, c = 2/4) family of SPI DACs was
inherited by TI when they acquired National Semiconductor in 2011.
This driver was developed for and tested with the DAC082S085 built into
the Revolution Pi by KUNBUS, but should work with any of the other
chips as they share the same programming interface.
There is also a family of I2C DACs with just a single channel called
DACrr1C08x (rr = 08/10/12, x = 1/5). Their programming interface is
very similar and it should be possible to extend the driver for these
chips with moderate effort. Alternatively they could be integrated into
ad5446.c. (The AD5301/AD5311/AD5321 use different power-down modes but
otherwise appear to be comparable.)
Furthermore there is a family of 8-channel DACs called DACrr8S085
(rr = 08/10/12) as well as two 16-bit DACs called DAC161Sxxx
(xxx = 055/997). These are more complicated devices with support for
daisy-chaining and the ability to power down each channel separately.
They could either be handled by a separate driver or integrated into the
present driver with a larger effort.
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* ade7759
- Fix a signed extension bug.
* as3935
- The default noise and watch dog settings were such that the device
was unusuable in most applications. Add device tree parameters to
allow it to be configured to something that will actually work.
* at91-sama5d2 adc
- Fix handling of legacy device trees that don't provide the new
trigger edge property.
* dln2-adc
- Fix a missing Kconfig dependency on IIO_TRIGGERED_BUFFER.
* dummy driver
- Add a missing break so that writing in_voltage0_thresh_rising_en
doesn't always result in an error.
* zpa2326
- Drop a test for an always true condition so that gcc won't spit out
and unused variable warning.
-----BEGIN PGP SIGNATURE-----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=9Vfy
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second set of IIO fixes for the 4.14 cycle.
* ade7759
- Fix a signed extension bug.
* as3935
- The default noise and watch dog settings were such that the device
was unusuable in most applications. Add device tree parameters to
allow it to be configured to something that will actually work.
* at91-sama5d2 adc
- Fix handling of legacy device trees that don't provide the new
trigger edge property.
* dln2-adc
- Fix a missing Kconfig dependency on IIO_TRIGGERED_BUFFER.
* dummy driver
- Add a missing break so that writing in_voltage0_thresh_rising_en
doesn't always result in an error.
* zpa2326
- Drop a test for an always true condition so that gcc won't spit out
and unused variable warning.
Add driver to support older EC firmware that only support deprecated
ec command. Rely on ACPI memory map register to access sensor
information.
Present same interface as the regular cros_ec sensor stack:
- one iio device per accelerometer
- use HTML5 axis definition
- use iio abi units
- accept calibration calls, but do nothing
Chrome can use the same code than regular cros_ec sensor stack to
calculate orientation and lid angle.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO_DISTANCE is used for two purposes: for pedometers to record the
distance covered by a walker, and to measure the distance to an object
IIO_DISTANCE is in meters while IIO_PROXIMITY is a unitless measure
indirectly proportional to distance (higher value relates to a closer
object)
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the VMA based swap readahead was introduced, a new knob
/sys/kernel/mm/swap/vma_ra_max_order
was added as the max window of VMA swap readahead. This is to make it
possible to use different max window for VMA based readahead and
original physical readahead. But Minchan Kim pointed out that this will
cause a regression because setting page-cluster sysctl to zero cannot
disable swap readahead with the change.
To fix the regression, the page-cluster sysctl is used as the max window
of both the VMA based swap readahead and original physical swap
readahead. If more fine grained control is needed in the future, more
knobs can be added as the subordinate knobs of the page-cluster sysctl.
The vma_ra_max_order knob is deleted. Because the knob was introduced
in v4.14-rc1, and this patch is targeting being merged before v4.14
releasing, there should be no existing users of this newly added ABI.
Link: http://lkml.kernel.org/r/20171011070847.16003-1-ying.huang@intel.com
Fixes: ec560175c0 ("mm, swap: VMA based swap readahead")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The PM QoS flag PM_QOS_FLAG_REMOTE_WAKEUP is not used consistently
and the vast majority of code simply assumes that remote wakeup
should be enabled for devices in runtime suspend if they can
generate wakeup signals, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make admin-guide document refs valid.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update my imgtec.com and personal email address to my kernel.org one in
a few places as MIPS will soon no longer be part of Imagination
Technologies, and add mappings in .mailcap so get_maintainer.pl reports
the right address.
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki